[gelöst]Cinnamon startet nur im Rückfallmodus

[Minnten]

Hallo liebe Forengemeinde,

ich habe Anfang Januar Windows 7 von der Festplatte verbannt und Debian Jessie mit Cinnamon installiert.
Ich war bisher immer sehr zufrieden, es gab zwar immer mal kleinere Probleme, die ich aber mit Google gut lösen konnte. Nur zu meinem aktuellen Problem gibt es anscheinend keine zufriedenstellende Lösung.

Am Freitag Abend habe ich die letzten Updates eingespielt.
Seit Samstag startet Cinnamon nicht mehr, bzw. nur noch im Rückfallmodus.
Was ich bisher alles versucht habe:

1. Cinnamon entfernt (apt-get purge) und wieder installiert - keine Veränderung
2. Treiber neu installiert(nouveau statt Nvidia) - keine Veränderung
3. die eingespielten Updates habe ich wieder manuell deinstalliert(purge und anschließend autoremove) - keine Veränderung
4. ich habe mit "X -configure" eine xorg.config erstellt und in das richtige Verzeichnis kopiert.

Ansonsten habe ich auch noch einiges anderes Herumprobiert, an das ich mich jetzt gar nicht mehr so genau erinnern kann, da ich mittlerweile ca. 10 Stunden mit Tablet(Internet) und Konsole(Linux) verbracht habe.


Ich bin mit meinem Latein am Ende und hoffe, ihr könnt mir helfen.
Hier noch einige Infos zum Rechner:
lspci

Code: Alles auswählen

00:00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network Connection (rev 04)
00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4)
00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 (rev c4)
00:1c.3 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 4 (rev c4)
00:1c.5 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 6 (rev c4)
00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation QM77 Express Chipset LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04)
01:00.0 VGA compatible controller: NVIDIA Corporation GF108GLM [NVS 5200M] (rev a1)
03:00.0 Network controller: Intel Corporation Centrino Ultimate-N 6300 (rev 35)
08:00.0 SD Host controller: O2 Micro, Inc. OZ600FJ0/OZ900FJ0/OZ600FJS SD/MMC Card Reader Controller (rev 05)

Wenn noch Infos fehlen, bitte einfach melden, ich wäre sehr glücklich, wenn ich den Rechner nicht neu installieren müsste.

Gruß
Minnten

[uname]

Du könntest mal eben kurz task-mate-desktop oder task-xfce-desktop oder einen Window-Manager wie openbox installieren um zu schauen ob das überhaupt ein Grafikproblem oder ein Cinnamon-Problem ist. Installiere sicherheitshalber auch task-cinnamon-desktop erneut. Vielleicht ist was verlorengegangen.
Auch solltest du alle Tests rückgängig machen, da du vielleicht neue Probleme eingebaut hast.

[Minnten]

Hallo,

Danke für die Tipps,

Aktuell schreibe ich von der Desktopumgebung Mate aus, das hatte ich oben vergessen zu erwähnen.

Die Tests habe ich immer gleich wieder rückgängig gemacht.

Ich habe mal task-cinnamon-desktop zu installieren, mit dem Ergebnis, das es nicht installiert war, obwohl Cinnamon als eigenständiges Paket installiert war. Leider brachte das auch nicht den erwünschten Effekt, der Cinnamon-Desktop startet immer noch nur im Rückfallmodus, in dem ich nichts tun kann.

Gruß
Minnten

[uname]

Du könntest vielleicht mal einen neuen Benutzer mit einem leeren /hom/user-Verzeichnis anlegen und dich anmelden. Funktioniert das? Dann liegt es eher an irgendwelchen Benutzerkonfigurationen. Sollte auch das fehlschlagen tippe ich auf irgendwelche Systemkonfigurationen bzw. Hardwareprobleme.

[Minnten]

Hallo,

Das mit dem neuen Benutzer hab ich auch schon durch, hat leider auch nicht funktioniert.

Gruß
Minnten

[uname]

Cinnamon benötigt laut Internet gegenüber Mate eine 3D - Beschleunigung. Ich denke in die Richtung musst du suchen.

Suche z.B. GF108GLM in http://www.free3d.org .

Am 08.03.2017 gab es mit https://www.debian.org/security/2017/dsa-3804 evtl. neue Kernel-Pakete. Bin mir aber nicht sicher.
Leider kenne ich mich mit Nvidia auch nicht aus. Vielleicht muss man den Treiber mal ganz neu installieren inkl. irgendwelcher Kernel-Anpassungen.

Statt proprietäre Treiber würde ich immer freie Treiber wie xserver-xorg-video-nouveau verwenden.
Dafür würde ich sogar auf Cinnamon verzichten. Mate ist toll und die Menüs kannst du wie bei Cinnamon bzw. Windows (Start unten links) und keine zwei Leisten anpassen.
Das Standard-Icon-Theme ist ziemlich lahm beim ersten Aufruf des Menübaums. Das habe ich auch geändert.

[towo]

Ihr habt aber schon bemerkt, daß das System sowohl Intel, als auch Nvidia hat?
Ergo muß das Problem nicht bei Nvidia, sondern kann durchaus auch beim Intel liegen.
Man müßte halt erstmal wissen, welche Grafik benutzt wird. Relevante Logfiles wären auch nett, um das Problem einzukreisen.

[Minnten]

Hallo,

@towo:
Ja, das ist ein Laptop mit 2 Grafikkarten, leider handelt es sich dabei um eine NVIDIA Optimus Lösung, bei der die Intel Graka für das tägliche geschäft verwendet wird und die NVIDIA für alle grafisch aufwändigeren Anwendungen.
ABER NVIDIA Optimus ist rein auf Windows ausgelegt und es gibt keine wirklich zufriedenstellende Opensource Lösung (evtl. Bumblebee, das ist aber nicht so toll).
Von daher nutze ich das System, wie es nach der Installation war, da jeder Versuch, etwas zu verbessern, nur mehr Probleme mit sich gebracht hat.

Wenn du mir sagen würdest, welche Logfiles hilfreich wären, dann stelle ich die gerne noch rein.

@uname:
Ich habe bisher auch immer nouveau genutzt, nur im Zuge des aktuellen Problems habe ich den nvidia Treiber zwischenzeitlich installiert gehabt, um zu sehen, ob das Problem damit auch auftritt, da das der Fall war ist der nvidia-Treiber gleich wieder vom System geflogen.


Gruß
Minnten

[towo]

glxinfo | grep OpenGL

und /var/log/Xorg.0.log

wäre schonmal ein Anfang.

[Minnten]

1.

Code: Alles auswählen

# glxinfo | grep OpenGL
Xlib:  extension "GLX" missing on display ":0".
Xlib:  extension "GLX" missing on display ":0".
Xlib:  extension "GLX" missing on display ":0".
Xlib:  extension "GLX" missing on display ":0".
Xlib:  extension "GLX" missing on display ":0".
Xlib:  extension "GLX" missing on display ":0".
Xlib:  extension "GLX" missing on display ":0".
Error: couldn't find RGB GLX visual or fbconfig
Xlib:  extension "GLX" missing on display ":0".
Xlib:  extension "GLX" missing on display ":0".
Xlib:  extension "GLX" missing on display ":0".
Xlib:  extension "GLX" missing on display ":0".
Xlib:  extension "GLX" missing on display ":0".
Xlib:  extension "GLX" missing on display ":0".
Xlib:  extension "GLX" missing on display ":0".
Xlib:  extension "GLX" missing on display ":0".
Xlib:  extension "GLX" missing on display ":0".
Xlib:  extension "GLX" missing on display ":0".

2.

Code: Alles auswählen

[     6.554] 
X.Org X Server 1.16.4
Release Date: 2014-12-20
[     6.554] X Protocol Version 11, Revision 0
[     6.554] Build Operating System: Linux 3.2.0-4-amd64 i686 Debian
[     6.554] Current Operating System: Linux ###############4.9.0-0.bpo.2-686-pae #1 SMP Debian 4.9.13-1~bpo8+1 (2017-02-27) i686
[     6.554] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-0.bpo.2-686-pae root=UUID=de61be0c-4824-45d4-b077-a45e22d58a8f ro quiet
[     6.554] Build Date: 11 February 2015  01:14:26AM
[     6.554] xorg-server 2:1.16.4-1 (http://www.debian.org/support) 
[     6.554] Current version of pixman: 0.32.6
[     6.554] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[     6.554] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     6.554] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Mar 28 23:26:28 2017
[     6.560] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[     6.562] (==) No Layout section.  Using the first Screen section.
[     6.562] (==) No screen section available. Using defaults.
[     6.562] (**) |-->Screen "Default Screen Section" (0)
[     6.562] (**) |   |-->Monitor "<default monitor>"
[     6.562] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[     6.562] (==) Automatically adding devices
[     6.562] (==) Automatically enabling devices
[     6.562] (==) Automatically adding GPU devices
[     6.569] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[     6.569] 	Entry deleted from font path.
[     6.577] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/100dpi/:unscaled,
	/usr/share/fonts/X11/75dpi/:unscaled,
	/usr/share/fonts/X11/Type1,
	/usr/share/fonts/X11/100dpi,
	/usr/share/fonts/X11/75dpi,
	built-ins
[     6.577] (==) ModulePath set to "/usr/lib/xorg/modules"
[     6.577] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[     6.577] (II) Loader magic: 0x802f9700
[     6.577] (II) Module ABI versions:
[     6.577] 	X.Org ANSI C Emulation: 0.4
[     6.577] 	X.Org Video Driver: 18.0
[     6.577] 	X.Org XInput driver : 21.0
[     6.577] 	X.Org Server Extension : 8.0
[     6.577] (II) xfree86: Adding drm device (/dev/dri/card0)
[     6.577] (II) xfree86: Adding drm device (/dev/dri/card1)
[     6.586] (--) PCI:*(0:0:2:0) 8086:0166:1028:0535 rev 9, Mem @ 0xf6400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[     6.586] (--) PCI: (0:1:0:0) 10de:0dfc:1028:1535 rev 161, Mem @ 0xf5000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[     6.586] (II) LoadModule: "glx"
[     6.588] (II) Loading /usr/lib/xorg/modules/linux/libglx.so
[     6.702] (II) Module glx: vendor="NVIDIA Corporation"
[     6.703] 	compiled for 4.0.2, module version = 1.0.0
[     6.703] 	Module class: X.Org Server Extension
[     6.703] (II) NVIDIA GLX Module  375.26  Thu Dec  8 17:59:06 PST 2016
[     6.703] (II) Applying OutputClass "nvidia" to /dev/dri/card0
[     6.703] 	loading driver: nvidia
[     6.703] (==) Matched intel as autoconfigured driver 0
[     6.703] (==) Matched nvidia as autoconfigured driver 1
[     6.703] (==) Matched nouveau as autoconfigured driver 2
[     6.703] (==) Matched nv as autoconfigured driver 3
[     6.703] (==) Matched intel as autoconfigured driver 4
[     6.703] (==) Matched modesetting as autoconfigured driver 5
[     6.703] (==) Matched fbdev as autoconfigured driver 6
[     6.703] (==) Matched vesa as autoconfigured driver 7
[     6.703] (==) Assigned the driver to the xf86ConfigLayout
[     6.703] (II) LoadModule: "intel"
[     6.703] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[     6.707] (II) Module intel: vendor="X.Org Foundation"
[     6.707] 	compiled for 1.16.4, module version = 2.99.917
[     6.707] 	Module class: X.Org Video Driver
[     6.707] 	ABI class: X.Org Video Driver, version 18.0
[     6.707] (II) LoadModule: "nvidia"
[     6.707] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[     6.712] (II) Module nvidia: vendor="NVIDIA Corporation"
[     6.712] 	compiled for 4.0.2, module version = 1.0.0
[     6.712] 	Module class: X.Org Video Driver
[     6.714] (II) LoadModule: "nouveau"
[     6.714] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[     6.716] (II) Module nouveau: vendor="X.Org Foundation"
[     6.716] 	compiled for 1.16.0, module version = 1.0.11
[     6.716] 	Module class: X.Org Video Driver
[     6.716] 	ABI class: X.Org Video Driver, version 18.0
[     6.716] (II) LoadModule: "nv"
[     6.717] (WW) Warning, couldn't open module nv
[     6.717] (II) UnloadModule: "nv"
[     6.717] (II) Unloading nv
[     6.717] (EE) Failed to load module "nv" (module does not exist, 0)
[     6.717] (II) LoadModule: "modesetting"
[     6.717] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[     6.718] (II) Module modesetting: vendor="X.Org Foundation"
[     6.718] 	compiled for 1.16.4, module version = 0.9.0
[     6.719] 	Module class: X.Org Video Driver
[     6.719] 	ABI class: X.Org Video Driver, version 18.0
[     6.719] (II) LoadModule: "fbdev"
[     6.719] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[     6.720] (II) Module fbdev: vendor="X.Org Foundation"
[     6.720] 	compiled for 1.15.99.904, module version = 0.4.4
[     6.720] 	Module class: X.Org Video Driver
[     6.720] 	ABI class: X.Org Video Driver, version 18.0
[     6.720] (II) LoadModule: "vesa"
[     6.720] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[     6.720] (II) Module vesa: vendor="X.Org Foundation"
[     6.720] 	compiled for 1.15.99.904, module version = 2.3.3
[     6.720] 	Module class: X.Org Video Driver
[     6.720] 	ABI class: X.Org Video Driver, version 18.0
[     6.720] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
	i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
	915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
	Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
	GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[     6.721] (II) intel: Driver for Intel(R) HD Graphics
[     6.721] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[     6.721] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[     6.722] (II) NVIDIA dlloader X Driver  375.26  Thu Dec  8 17:34:56 PST 2016
[     6.722] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[     6.722] (II) NOUVEAU driver Date:   Thu Aug 28 03:57:48 2014 +0200
[     6.722] (II) NOUVEAU driver for NVIDIA chipset families :
[     6.722] 	RIVA TNT        (NV04)
[     6.722] 	RIVA TNT2       (NV05)
[     6.722] 	GeForce 256     (NV10)
[     6.722] 	GeForce 2       (NV11, NV15)
[     6.722] 	GeForce 4MX     (NV17, NV18)
[     6.723] 	GeForce 3       (NV20)
[     6.723] 	GeForce 4Ti     (NV25, NV28)
[     6.723] 	GeForce FX      (NV3x)
[     6.723] 	GeForce 6       (NV4x)
[     6.723] 	GeForce 7       (G7x)
[     6.723] 	GeForce 8       (G8x)
[     6.723] 	GeForce GTX 200 (NVA0)
[     6.723] 	GeForce GTX 400 (NVC0)
[     6.723] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[     6.723] (II) FBDEV: driver for framebuffer: fbdev
[     6.723] (II) VESA: driver for VESA chipsets: vesa
[     6.723] (++) using VT number 7

[     6.741] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20160919
[     6.741] (II) intel(0): SNA compiled: xserver-xorg-video-intel 2:2.99.917+git20161206-1~bpo8+1 (Vincent Cheng <vcheng@debian.org>)
[     6.741] (II) intel(0): SNA compiled for use with valgrind
[     6.742] (EE) [drm] KMS not enabled
[     6.742] (WW) Falling back to old probe method for modesetting
[     6.742] (WW) Falling back to old probe method for fbdev
[     6.742] (II) Loading sub module "fbdevhw"
[     6.742] (II) LoadModule: "fbdevhw"
[     6.742] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[     6.747] (II) Module fbdevhw: vendor="X.Org Foundation"
[     6.747] 	compiled for 1.16.4, module version = 0.0.2
[     6.747] 	ABI class: X.Org Video Driver, version 18.0
[     6.747] (WW) Falling back to old probe method for vesa
[     6.748] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4000
[     6.748] (--) intel(0): CPU: x86, sse2, sse3, ssse3, sse4.1, sse4.2, avx; using a maximum of 2 threads
[     6.748] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[     6.748] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[     6.748] (==) intel(0): RGB weight 888
[     6.748] (==) intel(0): Default visual is TrueColor
[     6.749] (II) intel(0): Output LVDS1 has no monitor section
[     6.779] (**) intel(0): Found backlight control interface intel_backlight (type 'raw') for output LVDS1
[     6.779] (II) intel(0): Enabled output LVDS1
[     6.779] (II) intel(0): Output VGA1 has no monitor section
[     6.779] (II) intel(0): Enabled output VGA1
[     6.779] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[     6.779] (II) intel(0): Output VIRTUAL1 has no monitor section
[     6.779] (II) intel(0): Enabled output VIRTUAL1
[     6.779] (--) intel(0): Output LVDS1 using initial mode 1600x900 on pipe 0
[     6.779] (==) intel(0): TearFree disabled
[     6.779] (==) intel(0): DPI set to (96, 96)
[     6.779] (II) Loading sub module "dri3"
[     6.779] (II) LoadModule: "dri3"
[     6.779] (II) Module "dri3" already built-in
[     6.779] (II) Loading sub module "dri2"
[     6.779] (II) LoadModule: "dri2"
[     6.779] (II) Module "dri2" already built-in
[     6.779] (II) Loading sub module "present"
[     6.779] (II) LoadModule: "present"
[     6.779] (II) Module "present" already built-in
[     6.780] (II) UnloadModule: "fbdev"
[     6.780] (II) Unloading fbdev
[     6.780] (II) UnloadSubModule: "fbdevhw"
[     6.780] (II) Unloading fbdevhw
[     6.780] (II) UnloadModule: "vesa"
[     6.780] (II) Unloading vesa
[     6.780] (==) Depth 24 pixmap format is 32 bpp
[     6.785] (II) intel(0): SNA initialized with Ivybridge (gen7, gt2) backend
[     6.785] (==) intel(0): Backing store enabled
[     6.785] (==) intel(0): Silken mouse enabled
[     6.786] (II) intel(0): HW Cursor enabled
[     6.786] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[     6.787] (==) intel(0): DPMS enabled
[     6.788] (==) intel(0): Display hotplug detection enabled
[     6.788] (II) intel(0): [DRI2] Setup complete
[     6.788] (II) intel(0): [DRI2]   DRI driver: i965
[     6.788] (II) intel(0): [DRI2]   VDPAU driver: va_gl
[     6.788] (II) intel(0): direct rendering: DRI2 enabled
[     6.788] (II) intel(0): hardware support for Present enabled
[     6.788] (--) RandR disabled
[     6.815] (II) SELinux: Disabled on system
[     6.820] (EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found)
[     6.823] (II) intel(0): switch to mode 1600x900@60.0 on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
[     6.844] (II) intel(0): Setting screen physical size to 423 x 238
[     7.017] (II) config/udev: Adding input device Power Button (/dev/input/event6)
[     7.017] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[     7.017] (II) LoadModule: "evdev"
[     7.017] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[     7.020] (II) Module evdev: vendor="X.Org Foundation"
[     7.020] 	compiled for 1.16.0, module version = 2.9.0
[     7.020] 	Module class: X.Org XInput Driver
[     7.020] 	ABI class: X.Org XInput driver, version 21.0
[     7.020] (II) Using input driver 'evdev' for 'Power Button'
[     7.020] (**) Power Button: always reports core events
[     7.020] (**) evdev: Power Button: Device: "/dev/input/event6"
[     7.020] (--) evdev: Power Button: Vendor 0 Product 0x1
[     7.020] (--) evdev: Power Button: Found keys
[     7.020] (II) evdev: Power Button: Configuring as keyboard
[     7.020] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input7/event6"
[     7.020] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[     7.020] (**) Option "xkb_rules" "evdev"
[     7.020] (**) Option "xkb_model" "pc105"
[     7.020] (**) Option "xkb_layout" "de"
[     7.096] (II) config/udev: Adding input device Video Bus (/dev/input/event9)
[     7.096] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[     7.096] (II) Using input driver 'evdev' for 'Video Bus'
[     7.096] (**) Video Bus: always reports core events
[     7.096] (**) evdev: Video Bus: Device: "/dev/input/event9"
[     7.096] (--) evdev: Video Bus: Vendor 0 Product 0x6
[     7.096] (--) evdev: Video Bus: Found keys
[     7.096] (II) evdev: Video Bus: Configuring as keyboard
[     7.096] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input12/event9"
[     7.096] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[     7.096] (**) Option "xkb_rules" "evdev"
[     7.096] (**) Option "xkb_model" "pc105"
[     7.096] (**) Option "xkb_layout" "de"
[     7.097] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[     7.097] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[     7.097] (II) Using input driver 'evdev' for 'Video Bus'
[     7.097] (**) Video Bus: always reports core events
[     7.097] (**) evdev: Video Bus: Device: "/dev/input/event7"
[     7.097] (--) evdev: Video Bus: Vendor 0 Product 0x6
[     7.097] (--) evdev: Video Bus: Found keys
[     7.097] (II) evdev: Video Bus: Configuring as keyboard
[     7.097] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:14/LNXVIDEO:00/input/input9/event7"
[     7.097] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[     7.097] (**) Option "xkb_rules" "evdev"
[     7.097] (**) Option "xkb_model" "pc105"
[     7.097] (**) Option "xkb_layout" "de"
[     7.097] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[     7.097] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[     7.097] (II) Using input driver 'evdev' for 'Power Button'
[     7.097] (**) Power Button: always reports core events
[     7.097] (**) evdev: Power Button: Device: "/dev/input/event4"
[     7.098] (--) evdev: Power Button: Vendor 0 Product 0x1
[     7.098] (--) evdev: Power Button: Found keys
[     7.098] (II) evdev: Power Button: Configuring as keyboard
[     7.098] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5/event4"
[     7.098] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[     7.098] (**) Option "xkb_rules" "evdev"
[     7.098] (**) Option "xkb_model" "pc105"
[     7.098] (**) Option "xkb_layout" "de"
[     7.098] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
[     7.098] (II) No input driver specified, ignoring this device.
[     7.098] (II) This device may have been added with another device file.
[     7.099] (II) config/udev: Adding input device Sleep Button (/dev/input/event5)
[     7.099] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[     7.099] (II) Using input driver 'evdev' for 'Sleep Button'
[     7.099] (**) Sleep Button: always reports core events
[     7.099] (**) evdev: Sleep Button: Device: "/dev/input/event5"
[     7.099] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[     7.099] (--) evdev: Sleep Button: Found keys
[     7.099] (II) evdev: Sleep Button: Configuring as keyboard
[     7.099] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input6/event5"
[     7.099] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 10)
[     7.099] (**) Option "xkb_rules" "evdev"
[     7.099] (**) Option "xkb_model" "pc105"
[     7.099] (**) Option "xkb_layout" "de"
[     7.100] (II) config/udev: Adding input device HDA Intel PCH Dock Line Out (/dev/input/event10)
[     7.100] (II) No input driver specified, ignoring this device.
[     7.100] (II) This device may have been added with another device file.
[     7.101] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event11)
[     7.101] (II) No input driver specified, ignoring this device.
[     7.101] (II) This device may have been added with another device file.
[     7.101] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event8)
[     7.101] (II) No input driver specified, ignoring this device.
[     7.101] (II) This device may have been added with another device file.
[     7.102] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[     7.102] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[     7.102] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[     7.102] (**) AT Translated Set 2 keyboard: always reports core events
[     7.102] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[     7.102] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[     7.102] (--) evdev: AT Translated Set 2 keyboard: Found keys
[     7.102] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[     7.102] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[     7.102] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[     7.102] (**) Option "xkb_rules" "evdev"
[     7.102] (**) Option "xkb_model" "pc105"
[     7.102] (**) Option "xkb_layout" "de"
[     7.103] (II) config/udev: Adding input device AlpsPS/2 ALPS DualPoint TouchPad (/dev/input/event2)
[     7.103] (**) AlpsPS/2 ALPS DualPoint TouchPad: Applying InputClass "evdev touchpad catchall"
[     7.103] (**) AlpsPS/2 ALPS DualPoint TouchPad: Applying InputClass "evdev touchscreen catchall"
[     7.103] (**) AlpsPS/2 ALPS DualPoint TouchPad: Applying InputClass "touchpad catchall"
[     7.103] (**) AlpsPS/2 ALPS DualPoint TouchPad: Applying InputClass "Default clickpad buttons"
[     7.103] (II) LoadModule: "synaptics"
[     7.103] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[     7.104] (II) Module synaptics: vendor="X.Org Foundation"
[     7.104] 	compiled for 1.16.0.901, module version = 1.8.99
[     7.104] 	Module class: X.Org XInput Driver
[     7.104] 	ABI class: X.Org XInput driver, version 21.0
[     7.104] (II) Using input driver 'synaptics' for 'AlpsPS/2 ALPS DualPoint TouchPad'
[     7.104] (**) AlpsPS/2 ALPS DualPoint TouchPad: always reports core events
[     7.104] (**) Option "Device" "/dev/input/event2"
[     7.160] (II) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: ignoring touch events for semi-multitouch device
[     7.160] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: x-axis range 0 - 2000 (res 25)
[     7.160] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: y-axis range 0 - 1400 (res 32)
[     7.160] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: pressure range 0 - 127
[     7.160] (II) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: device does not report finger width.
[     7.160] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: buttons: left right middle double triple
[     7.160] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: Vendor 0x2 Product 0x8
[     7.160] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: invalid finger width range.  defaulting to 0 - 15
[     7.160] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: touchpad found
[     7.160] (**) AlpsPS/2 ALPS DualPoint TouchPad: always reports core events
[     7.200] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input2/event2"
[     7.200] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS DualPoint TouchPad" (type: TOUCHPAD, id 12)
[     7.200] (**) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[     7.200] (**) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: (accel) MaxSpeed is now 1.75
[     7.200] (**) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: (accel) AccelFactor is now 0.082
[     7.200] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) keeping acceleration scheme 1
[     7.200] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) acceleration profile 1
[     7.200] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) acceleration factor: 2.000
[     7.200] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) acceleration threshold: 4
[     7.200] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: touchpad found
[     7.200] (II) config/udev: Adding input device AlpsPS/2 ALPS DualPoint TouchPad (/dev/input/mouse1)
[     7.200] (**) AlpsPS/2 ALPS DualPoint TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[     7.200] (II) config/udev: Adding input device AlpsPS/2 ALPS DualPoint Stick (/dev/input/event1)
[     7.200] (**) AlpsPS/2 ALPS DualPoint Stick: Applying InputClass "evdev pointer catchall"
[     7.200] (II) Using input driver 'evdev' for 'AlpsPS/2 ALPS DualPoint Stick'
[     7.200] (**) AlpsPS/2 ALPS DualPoint Stick: always reports core events
[     7.200] (**) evdev: AlpsPS/2 ALPS DualPoint Stick: Device: "/dev/input/event1"
[     7.200] (--) evdev: AlpsPS/2 ALPS DualPoint Stick: Vendor 0x2 Product 0x8
[     7.200] (--) evdev: AlpsPS/2 ALPS DualPoint Stick: Found 3 mouse buttons
[     7.200] (--) evdev: AlpsPS/2 ALPS DualPoint Stick: Found relative axes
[     7.201] (--) evdev: AlpsPS/2 ALPS DualPoint Stick: Found x and y relative axes
[     7.201] (II) evdev: AlpsPS/2 ALPS DualPoint Stick: Configuring as mouse
[     7.201] (**) evdev: AlpsPS/2 ALPS DualPoint Stick: YAxisMapping: buttons 4 and 5
[     7.201] (**) evdev: AlpsPS/2 ALPS DualPoint Stick: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[     7.201] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input3/event1"
[     7.201] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS DualPoint Stick" (type: MOUSE, id 13)
[     7.201] (II) evdev: AlpsPS/2 ALPS DualPoint Stick: initialized for relative axes.
[     7.201] (**) AlpsPS/2 ALPS DualPoint Stick: (accel) keeping acceleration scheme 1
[     7.201] (**) AlpsPS/2 ALPS DualPoint Stick: (accel) acceleration profile 0
[     7.201] (**) AlpsPS/2 ALPS DualPoint Stick: (accel) acceleration factor: 2.000
[     7.201] (**) AlpsPS/2 ALPS DualPoint Stick: (accel) acceleration threshold: 4
[     7.201] (II) config/udev: Adding input device AlpsPS/2 ALPS DualPoint Stick (/dev/input/mouse0)
[     7.201] (II) No input driver specified, ignoring this device.
[     7.201] (II) This device may have been added with another device file.
[     7.201] (II) config/udev: Adding input device PC Speaker (/dev/input/event12)
[     7.201] (II) No input driver specified, ignoring this device.
[     7.201] (II) This device may have been added with another device file.
[     7.202] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event13)
[     7.202] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[     7.202] (II) Using input driver 'evdev' for 'Dell WMI hotkeys'
[     7.202] (**) Dell WMI hotkeys: always reports core events
[     7.202] (**) evdev: Dell WMI hotkeys: Device: "/dev/input/event13"
[     7.202] (--) evdev: Dell WMI hotkeys: Vendor 0 Product 0
[     7.202] (--) evdev: Dell WMI hotkeys: Found keys
[     7.202] (II) evdev: Dell WMI hotkeys: Configuring as keyboard
[     7.202] (**) Option "config_info" "udev:/sys/devices/virtual/input/input14/event13"
[     7.202] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 14)
[     7.202] (**) Option "xkb_rules" "evdev"
[     7.202] (**) Option "xkb_model" "pc105"
[     7.202] (**) Option "xkb_layout" "de"
[     8.779] (II) intel(0): EDID vendor "SEC", prod id 21579
[     8.779] (II) intel(0): Printing DDC gathered Modelines:
[     8.779] (II) intel(0): Modeline "1600x900"x0.0  130.22  1600 1648 1680 2128  900 902 907 1020 +hsync -vsync (61.2 kHz eP)
[     8.779] (II) intel(0): Modeline "1600x900"x0.0  120.91  1600 1648 1680 2200  900 902 907 1374 +hsync -vsync (55.0 kHz e)

[towo]

Naja, wie vermutet.

Dein System ist Optimus, Nvidia kann so einfach nicht verwendet werden und Intel ist das primäre Device.

[ 6.702] (II) Module glx: vendor="NVIDIA Corporation"
[ 6.703] compiled for 4.0.2, module version = 1.0.0
[ 6.703] Module class: X.Org Server Extension
[ 6.703] (II) NVIDIA GLX Module 375.26 Thu Dec 8 17:59:06 PST 2016

So kann das auch nix werden.

Code: Alles auswählen

apt purge $(dpkg -l | awk '/nvidia/{ print $2 }') && apt install xserver-xorg-core --reinstall

Könnte funktionieren wenn Du danach rebootest.
Sollte es nicht funktionieren, dann nochmal die beiden Ausgaben posten.

[Minnten]

Hallo,

ja hat funktioniert, jetzt geht Cinnamon wieder.

Nur kurz zum Verständnis, die Nvidia-Treiber waren falsch, da die Intel Graka das Primäre Device war.
Und im Anschluss wurde einfach der Xserver neu installiert.

Gruß
Minnten