[gelöst] Bluetooth fehlt nach Installation von Jessie

Debian auf Notebooks und speziellen Geräten wie eingebetteten Systemen, Routern, Set-Top-Boxen, ...
Antworten
cbardak
Beiträge: 23
Registriert: 14.03.2012 09:20:38

[gelöst] Bluetooth fehlt nach Installation von Jessie

Beitrag von cbardak » 27.07.2015 12:00:10

Hallo,

auf meinem Laptop HP 6830s habe ich Jessie neu installiert (alte Partitionen neu formatiert).
Vorher habe ich mit Wheezy gearbeitet, hier wurde mein Bluetooth-Gerät (intern) mit lsusb als 'Broadcom BCM2045' erkannt und funktionierte auch.
Nach der Neuinstallation wird das Bluetooth-Gerät aber nicht mehr gefunden.

Ich habe darauf hin zunächst 'firmware-linux' installiert jedoch ohne Ergebnis. Die Ausgabe von lsusb zeigt kein Bluetooth-Gerät. Im Bios habe ich nachgeschaut, dort ist das Gerät eingeschaltet. Dann habe ich den Laptop mit einer alten Live-Disk gestartet, auch hier wird kein Bluetooth-Gerät gefunden.

Für mich hört sich das so an, als wenn das Gerät defekt wäre, aber das es genau zu diesem Zeitpunkt den Geist aufgibt?!
Die einzige Änderung, die ich vor der Installation im Bios vorgenommen habe, war UEFI zu aktivieren und die Startreihenfolge zu ändern.

Ich weiß nicht, wo ich jetzt noch suchen könnte, daher poste ich auch noch keine Ausgaben. Für Tipps wäre ich sehr dankbar!

Christian
Zuletzt geändert von cbardak am 28.07.2015 22:54:13, insgesamt 2-mal geändert.

Benutzeravatar
kalle123
Beiträge: 2702
Registriert: 28.03.2015 12:27:47
Wohnort: Mönchengladbach

Re: Bluetooth-Gerät wird nach Installation von Jessie nicht

Beitrag von kalle123 » 27.07.2015 15:57:49

Das hier https://wiki.debian.org/BluetoothUser kennst du?

bluetooth ist installiert? Wie sieht der Status aus?

cbardak
Beiträge: 23
Registriert: 14.03.2012 09:20:38

Re: Bluetooth-Gerät wird nach Installation von Jessie nicht

Beitrag von cbardak » 27.07.2015 21:49:32

Hallo!

Bluetooth ist bereits installiert:

Code: Alles auswählen

# service bluetooth status
● bluetooth.service - Bluetooth service
   Loaded: loaded (/lib/systemd/system/bluetooth.service; enabled)
   Active: active (running) since Mo 2015-07-27 11:44:11 CEST; 9h ago
     Docs: man:bluetoothd(8)
 Main PID: 481 (bluetoothd)
   Status: "Running"
   CGroup: /system.slice/bluetooth.service
           └─481 /usr/lib/bluetooth/bluetoothd

Jul 27 11:44:09 christian-laptop bluetoothd[481]: Bluetooth daemon 5.23
Jul 27 11:44:12 christian-laptop bluetoothd[481]: Starting SDP server
Jul 27 11:44:12 christian-laptop bluetoothd[481]: Bluetooth management interface 1.6 initialized
Jul 27 11:44:12 christian-laptop bluetoothd[481]: Sap driver initialization failed.
Jul 27 11:44:12 christian-laptop bluetoothd[481]: sap-server: Operation not permitted (1)
Jul 27 11:44:12 christian-laptop bluetoothd[481]: hci0 Load Connection Parameters failed: Unknown Command (0x01)
Jul 27 11:44:39 christian-laptop bluetoothd[481]: Failed to set mode: Blocked through rfkill (0x12)
Jul 27 11:45:32 christian-laptop bluetoothd[481]: Failed to set mode: Blocked through rfkill (0x12)

Code: Alles auswählen

# lspci
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port (rev 07)
00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03)
00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03)
00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 03)
00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 03)
00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93)
00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] (rev 03)
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RV620/M82 [Mobility Radeon HD 3410/3430]
03:00.0 Network controller: Intel Corporation PRO/Wireless 5100 AGN [Shiloh] Network Connection
45:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8072 PCI-E Gigabit Ethernet Controller

Code: Alles auswählen

# lsusb
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 002: ID 046d:c52f Logitech, Inc. Unifying Receiver
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

Code: Alles auswählen

# lsmod | grep blue
bluetooth             374429  6 bnep,btusb
6lowpan_iphc           16588  1 bluetooth
rfkill                 18867  6 cfg80211,hp_wmi,bluetooth
crc16                  12343  2 ext4,bluetooth
Eigentlich müsste doch das Gerät bei lsusb gelistet werden, auch wenn die Treiber nicht eingerichtet sind. Welche Ursachen - ausser ein Harwaredefekt - kann es denn dafür geben, dass das Gerät hier plötzlich nicht mehr angezeigt wird?

cbardak
Beiträge: 23
Registriert: 14.03.2012 09:20:38

Re: Bluetooth-Gerät wird nach Installation von Jessie nicht

Beitrag von cbardak » 28.07.2015 22:52:54

Hallo!

Das Problem hat sich gerade von selbst gelöst:

Ich habe das W-LAN im Menü ausgeschaltet, hierdurch erschien ein neuer Menüpunkt 'Flugmodus', der nun eingeschaltet war. Nachdem ich den Flugmodus ausgeschaltet habe, erschien nun auch der Bluetooth-Eintrag. Auch 'lsusb' meldet nun wieder mein Bluetooth-Gerät, welches auch ohne weiteres Zutun funktioniert.

Der Hardwareschalter, der bei diesem Laptop sowohl W-Lan als auch Bluetooth ein- und ausschaltet, brachte dieses Ergebnis leider nicht.

Christian

cbardak
Beiträge: 23
Registriert: 14.03.2012 09:20:38

Re: [gelöst] Bluetooth fehlt nach Installation von Jessie

Beitrag von cbardak » 29.07.2015 15:09:16

Hallo,

ich hoffe es ist ok, den Beitrag wieder zu öffnen, obwohl ich ihn schon als gelöst markiert habe?!

Zwar habe ich nun mein Bluetooth-Gerät gefunden, muss die oben erwähnte Prozedur aber bei jedem Start durchführen: Also nach der Anmeldung 1. WLAN abschalten, 2. Flugmodus abschalten dann erscheint 'Bluetooth', 3. WLAN wieder einschalten.

Sollte ich das als Fehler melden? Wenn ja, gegen welches Paket?

Oder gibt es die Möglichkeit das Verhalten irgendwo einzustellen?

Antworten