hi,
gib es einen befehl mit dem man sich den akku ladezustand unter openbox anzeigen lassen kann. ähnlich wie bei cpu temp. (acpi -t )
bye docnet
Akku Ladezustand
Akku Ladezustand
break on through to the other side
Code: Alles auswählen
cat /proc/acpi/battery/BAT0/state
Magic is always the best solution -- especially reliable magic.
Kannste dir selber zambasteln
Die zwei dicken Werte sind einmal dein eigentlicher Voll Zustand von dem Accu
und des zweite dein letzter Wirklicher Voll Zustand des Accu's
PS.: Bei mir heisst des BAT0, weil ich nur einen Accu habe.... wird bei dir gleich sein denke ich
Die zwei dicken Werte sind einmal dein eigentlicher Voll Zustand von dem Accu
und des zweite dein letzter Wirklicher Voll Zustand des Accu's
Und hier steht dann die übrigen mAh vom Accuephraim | 08:05:25 | [~] #cat /proc/acpi/battery/BAT0/info
present: yes
design capacity: 4400 mAh
last full capacity: 4097 mAh
battery technology: rechargeable
design voltage: 10577 mV
design capacity warning: 409 mAh
design capacity low: 204 mAh
capacity granularity 1: 128 mAh
capacity granularity 2: 8 mAh
model number: 255/259
serial number: 00001
battery type: LiON
OEM info: OEM
Ciao Ephraimephraim | 08:05:39 | [~] #cat /proc/acpi/battery/BAT0/state
present: yes
capacity state: ok
charging state: discharging
present rate: unknown
remaining capacity: 2968 mAh
present voltage: 11399 mV
PS.: Bei mir heisst des BAT0, weil ich nur einen Accu habe.... wird bei dir gleich sein denke ich
Jabber-ID: ephraim@jabber.thefungamer.de
43 69 61 6F 20 45 70 68 72 61 69 6D 0A
4C 69 6E 75 78 20 69 73 0A
74 68 65 20 42 65 73 74 2E
System:
Amilo M7405
Debian Sarge 2.6.10 marke eigenbau
43 69 61 6F 20 45 70 68 72 61 69 6D 0A
4C 69 6E 75 78 20 69 73 0A
74 68 65 20 42 65 73 74 2E
System:
Amilo M7405
Debian Sarge 2.6.10 marke eigenbau
danke hat geklapptsebas hat geschrieben:Sowas?Code: Alles auswählen
cat /proc/acpi/battery/BAT0/state
@Schlingel
Code: Alles auswählen
acpi -b
acpi -h
acpi -t funz.?
thx for help
bye docnet
break on through to the other side