ich habe auf meinem Compaq Evo N150 Debian Sarge Testing installiert.
Das System läuft mit 2.6.8er Kernel und Winmodem/LAN/Sound? gut.
Nun habe ich mir für meine große Platte eine USB 2.0 PCMCIA Krte gekauft, wobei ich extra darauf geachtet habe, dass die zu Linux kompatibel ist.
Wenn ich die Karte bei hochgefahrenem System einstecke bekomme ich unten stehende Felermeldung.
Kann es sein, dass auf dem IRQ10 zuviel dran hängt (ist für Netzwerk/Sound/ACPI/PCMCIA/USB1.1 zuständig).
Auf jeden Fall funktioniert nach dem Einstecken der Karte kein ACPI und das normale USB1.1 mehr. Der Rest wahrscheinlich auch nicht mehr.
Weiterhin habe ich noch folgende Probleme:
Das Bild ist mehrere Pixel nach Rechts verschoben, wie kann ich das zurückschieben (xvidtune spaltet das bild 3mal)-
Beim Starten vonn KDE hört man die Startmelodie erst ganz leise, dann plötzlich in normaler Lautstärke.
Vielleicht kann mir jeman helfen, schon mal vielen Dank.
Mit freundlichen Grüßen
Florian
Code: Alles auswählen
Mar 18 16:17:59 debian kernel: irq 10: nobody cared!
Mar 18 16:17:59 debian kernel: [__report_bad_irq+42/144] __report_bad_irq+0x2a/0x90
Mar 18 16:17:59 debian kernel: [note_interrupt+112/176] note_interrupt+0x70/0xb0
Mar 18 16:17:59 debian kernel: [do_IRQ+288/304] do_IRQ+0x120/0x130
Mar 18 16:17:59 debian kernel: [common_interrupt+24/32] common_interrupt+0x18/0x20
Mar 18 16:17:59 debian kernel: [__do_softirq+46/128] __do_softirq+0x2e/0x80
Mar 18 16:17:59 debian kernel: [do_softirq+39/48] do_softirq+0x27/0x30
Mar 18 16:17:59 debian kernel: [do_IRQ+251/304] do_IRQ+0xfb/0x130
Mar 18 16:17:59 debian kernel: [common_interrupt+24/32] common_interrupt+0x18/0x20
Mar 18 16:17:59 debian kernel: handlers:
Mar 18 16:17:59 debian kernel: [acpi_irq+0/22] (acpi_irq+0x0/0x16)
Mar 18 16:17:59 debian kernel: [__crc_open_private_file+763542/1136474] (yenta_interrupt+0x0/0x40 [yenta_socket])
Mar 18 16:17:59 debian kernel: [__crc_open_private_file+763542/1136474] (yenta_interrupt+0x0/0x40 [yenta_socket])
Mar 18 16:17:59 debian kernel: [__crc_dquot_alloc_inode+287823/848472] (usb_hcd_irq+0x0/0x70 [usbcore])
Mar 18 16:17:59 debian kernel: [__crc_eth_type_trans+493932/715197] (e100_intr+0x0/0x580 [e100])
Mar 18 16:17:59 debian kernel: Disabling IRQ #10
Mar 18 16:18:01 debian kernel: ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
Mar 18 16:18:01 debian kernel: ohci_hcd: block sizes: ed 64 td 64
Mar 18 16:18:01 debian kernel: PCI: Enabling device 0000:02:00.0 (0000 -> 0002)
Mar 18 16:18:01 debian kernel: ACPI: PCI interrupt 0000:02:00.0[A] -> GSI 10 (level, low) -> IRQ 10
Mar 18 16:18:01 debian kernel: ohci_hcd 0000:02:00.0: ALi Corporation USB 1.1 Controller
Mar 18 16:18:02 debian pci.agent[2951]: ohci-hcd: loaded successfully
Mar 18 16:18:02 debian kernel: ohci_hcd 0000:02:00.0: irq 10, pci mem d4241000
Mar 18 16:18:02 debian kernel: ohci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
Mar 18 16:18:02 debian kernel: hub 2-0:1.0: USB hub found
Mar 18 16:18:02 debian kernel: hub 2-0:1.0: 2 ports detected
Mar 18 16:18:02 debian kernel: PCI: Enabling device 0000:02:00.3 (0000 -> 0002)
Mar 18 16:18:02 debian kernel: ACPI: PCI interrupt 0000:02:00.3[A] -> GSI 10 (level, low) -> IRQ 10
Mar 18 16:18:02 debian kernel: ehci_hcd 0000:02:00.3: ALi Corporation USB 2.0 Controller
Mar 18 16:18:02 debian kernel: ehci_hcd 0000:02:00.3: irq 10, pci mem d423f000
Mar 18 16:18:02 debian kernel: ehci_hcd 0000:02:00.3: new USB bus registered, assigned bus number 3
Mar 18 16:18:02 debian kernel: ehci_hcd 0000:02:00.3: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
Mar 18 16:18:02 debian kernel: hub 3-0:1.0: USB hub found
Mar 18 16:18:02 debian kernel: hub 3-0:1.0: 6 ports detected
Mar 18 16:18:02 debian pci.agent[2964]: ehci-hcd: loaded successfully
Mar 18 16:18:04 debian usb.agent[3020]: usbcore: already loaded
Mar 18 16:18:04 debian usb.agent[3047]: usbcore: already loaded
Mar 18 16:19:45 debian kernel: usb 1-1: reset full speed USB device using address 2
Mar 18 16:19:50 debian kernel: usb 1-1: control timeout on ep0out
Mar 18 16:19:56 debian kernel: usb 1-1: control timeout on ep0out
Mar 18 16:19:56 debian kernel: usb 1-1: device not accepting address 2, error -110
Mar 18 16:19:56 debian kernel: scsi: Device offlined - not ready after error recovery: host 0 channel 0 id 0 lun 0
Mar 18 16:19:56 debian kernel: SCSI error : <0 0 0 0> return code = 0x50000
Mar 18 16:19:56 debian kernel: end_request: I/O error, dev sda, sector 672
Mar 18 16:19:56 debian kernel: Buffer I/O error on device sda1, logical block 640
Mar 18 16:19:56 debian kernel: lost page write due to I/O error on sda1
Mar 18 16:19:56 debian kernel: scsi0 (0:0): rejecting I/O to offline device
Mar 18 16:19:56 debian kernel: Buffer I/O error on device sda1, logical block 18270
Mar 18 16:19:56 debian kernel: lost page write due to I/O error on sda1
Mar 18 16:19:56 debian kernel: Buffer I/O error on device sda1, logical block 18271
Mar 18 16:19:56 debian kernel: lost page write due to I/O error on sda1
Mar 18 16:19:56 debian kernel: usb 1-1: USB disconnect, address 2
Mar 18 16:19:56 debian kernel: usb 1-1: new full speed USB device using address 3
Mar 18 16:19:56 debian kernel: scsi0 (0:0): rejecting I/O to dead device
Mar 18 16:19:56 debian kernel: SCSI error: host 0 id 0 lun 0 return code = 4000000
Mar 18 16:19:56 debian kernel: ^ISense class 0, sense error 0, extended sense 0
Mar 18 16:19:56 debian kernel: slab error in kmem_cache_destroy(): cache `scsi_cmd_cache': Can't free all objects
Mar 18 16:19:56 debian kernel: [kmem_cache_destroy+134/256] kmem_cache_destroy+0x86/0x100
Mar 18 16:19:56 debian kernel: [__crc_kref_put+262511/6438620] scsi_destroy_command_freelist+0x57/0x90 [scsi_mod]
Mar 18 16:19:56 debian kernel: [__crc_kref_put+266906/6438620] scsi_host_dev_release+0x32/0x90 [scsi_mod]
Mar 18 16:19:56 debian kernel: [device_release+91/96] device_release+0x5b/0x60
Mar 18 16:19:56 debian kernel: [__crc_kref_put+268983/6438620] scsi_set_medium_removal+0x6f/0xa0 [scsi_mod]
Mar 18 16:19:56 debian kernel: [kobject_cleanup+152/160] kobject_cleanup+0x98/0xa0
Mar 18 16:19:56 debian kernel: [__crc_nr_swap_pages+588775/710485] scsi_disk_put+0x30/0x60 [sd_mod]
Mar 18 16:19:56 debian kernel: [__crc_nr_swap_pages+590449/710485] sd_release+0x4a/0x90 [sd_mod]
Mar 18 16:19:56 debian kernel: [blkdev_put+378/416] blkdev_put+0x17a/0x1a0
Mar 18 16:19:56 debian kernel: [blkdev_put+319/416] blkdev_put+0x13f/0x1a0
Mar 18 16:19:56 debian kernel: [deactivate_super+91/144] deactivate_super+0x5b/0x90
Mar 18 16:19:56 debian kernel: [__fput+238/304] __fput+0xee/0x130
Mar 18 16:19:56 debian kernel: [filp_close+89/144] filp_close+0x59/0x90
Mar 18 16:19:56 debian kernel: [sys_close+97/160] sys_close+0x61/0xa0
Mar 18 16:19:56 debian kernel: [syscall_call+7/11] syscall_call+0x7/0xb
Mar 18 16:20:01 debian kernel: usb 1-1: control timeout on ep0out
Mar 18 16:20:07 debian kernel: usb 1-1: control timeout on ep0out
Mar 18 16:20:07 debian kernel: usb 1-1: device not accepting address 3, error -110
Mar 18 16:20:07 debian kernel: usb 1-1: new full speed USB device using address 4
Mar 18 16:20:12 debian kernel: usb 1-1: control timeout on ep0out
Mar 18 16:20:17 debian kernel: usb 1-1: control timeout on ep0out
Mar 18 16:20:18 debian kernel: usb 1-1: device not accepting address 4, error -110