Mauszeiger läuft bei synqpicsTouchpad nach links oben weg
-
- Beiträge: 283
- Registriert: 16.10.2003 10:25:15
Mauszeiger läuft bei synqpicsTouchpad nach links oben weg
Ich habe immernoch das Problem das mein Mauszeiger beim berühren des Touchpads nach links oben läuft.
Ich glaube da stimmt immernoch was nicht.
Erst wenn ich qsynaptics starte und wieder beende, dann geht es.
Alternativ kann ich auch "qsynaptics -r" (zum reload) eingeben. Dann geht es.
Hat jemand eine Idee?
Vielleicht weiß ja auch jemand wo man mit solchen Problemen suchen kann.
Ich glaube da stimmt immernoch was nicht.
Erst wenn ich qsynaptics starte und wieder beende, dann geht es.
Alternativ kann ich auch "qsynaptics -r" (zum reload) eingeben. Dann geht es.
Hat jemand eine Idee?
Vielleicht weiß ja auch jemand wo man mit solchen Problemen suchen kann.
Zuletzt geändert von decembersoul am 30.03.2005 09:55:57, insgesamt 1-mal geändert.
-
- Beiträge: 283
- Registriert: 16.10.2003 10:25:15
-
- Beiträge: 283
- Registriert: 16.10.2003 10:25:15
-
- Beiträge: 283
- Registriert: 16.10.2003 10:25:15
Code: Alles auswählen
Section "Module"
Load "GLcore"
Load "bitmap"
Load "dbe"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "record"
Load "speedo"
Load "type1"
Load "vbe"
Load "synaptics"
EndSection
Code: Alles auswählen
Section "InputDevice"
Identifier "Synaptics Mouse"
Driver "synaptics"
Option "Device" "/dev/input/event1"
Option "Protocol" "event"
Option "LeftEdge" "1700"
Option "RightEdge" "5300"
Option "TopEdge" "1700"
Option "BottomEdge" "4200"
Option "FingerLow" "25"
Option "FingerHigh" "30"
Option "MaxTapTime" "180"
Option "MaxTapMove" "220"
Option "VertScrollDelta" "100"
Option "MinSpeed" "1.09"
Option "MaxSpeed" "1.55"
Option "AccelFactor" "0.015"
Option "SHMConfig" "off"
#Option "Repeater" "/dev/ps2mouse"
EndSection
Code: Alles auswählen
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
#InputDevice "ConfiguredMouse" "CorePointer"
#InputDevice "Generic Mouse" "AlwaysCore"
InputDevice "Synaptics Mouse" "CorePointer"
EndSection
-
- Beiträge: 283
- Registriert: 16.10.2003 10:25:15
OK ich habe meine Werte nun auch so gesetzt.
Hat leider nichts gebracht.
Nun habe ich SHMConfig nochmal auf on gesetzt und versucht einstellungen mit qsynaptics zu machen.
Wenn ich qsynaptics starte gibt er mir einige Meldungen aus:
Das
Hardware properties:
No touchpad found
Do you use a newer kernel than 2.4?
Then browse the messages or boot.msg for the hardware info
wundert mich.
Anscheinen stimmt da was nicht.
Wenn ich qsynaptics verlasse dann bekomme ich folgende Meldung:
Hat leider nichts gebracht.
Nun habe ich SHMConfig nochmal auf on gesetzt und versucht einstellungen mit qsynaptics zu machen.
Wenn ich qsynaptics starte gibt er mir einige Meldungen aus:
Code: Alles auswählen
patrick@laptop:~/vdr$ qsynaptics
users home is /home/patrick
LeftEdge:::1700
RightEdge:::5300
TopEdge:::1700
BottomEdge:::4200
FingerLow:::25
FingerHigh:::30
MaxTapTime:::270
MaxTapMove:::220
MaxDoubleTapTime:::180
ClickTime:::100
FastTaps:::0
EmulateMidButtonTime:::75
VertScrollDelta:::0
HorizScrollDelta:::0
MinSpeed:::1.09
MaxSpeed:::1.55
AccelFactor:::0.015
EdgeMotionMinZ:::30
EdgeMotionMaxZ:::160
EdgeMotionMinSpeed:::1
EdgeMotionMaxSpeed:::400
EdgeMotionUseAlways:::0
UpDownScrolling:::1
TouchpadOff:::0
GuestMouseOff:::0
LockedDrags:::0
RTCornerButton:::2
RBCornerButton:::3
LTCornerButton:::0
LBCornerButton:::0
TapButton1:::1
TapButton2:::1
TapButton3:::2
CircularScrolling:::1
CircScrollDelta:::0.079
CircScrollTrigger:::3
CircularPad:::0
PalmDetect:::1
PalmMinWidth:::10
PalmMinZ:::200
CoastingSpeed:::0
CoastingSpeed:::0
0.14.0
Hardware properties:
No touchpad found
Do you use a newer kernel than 2.4?
Then browse the messages or boot.msg for the hardware info
Hardware properties:
No touchpad found
Do you use a newer kernel than 2.4?
Then browse the messages or boot.msg for the hardware info
syndaemon found!
syndaemon timing is 0
read AccelFactor=0.015
read BottomEdge=4200
read CircScrollDelta=0.079
read CircScrollTrigger=3
read CircularPad=0
read CircularScrolling=0
read ClickTime=100
read CoastingSpeed=0
read EdgeMotionMaxSpeed=400
read EdgeMotionMaxZ=160
read EdgeMotionMinSpeed=1
read EdgeMotionMinZ=30
read EdgeMotionUseAlways=0
read EmulateMidButtonTime=75
read FastTaps=0
read FingerHigh=30
read FingerLow=25
read GuestMouseOff=0
read HScrollEmuOff=0
read HorizScrollDelta=100
read LBCornerButton=0
read LTCornerButton=0
read LeftEdge=1700
read LockedDrags=0
read MaxDoubleTapTime=180
read MaxSpeed=1.55
read MaxTapMove=220
read MaxTapTime=270
read MinSpeed=1.09
read PalmDetect=1
read PalmMinWidth=10
read PalmMinZ=200
read RBCornerButton=3
read RTCornerButton=2
read RightEdge=5300
read ScrollingMode=2
read SynDaemonOff=1
read SynDaemonTiming=0
read TapButton1=1
read TapButton2=1
read TapButton3=2
read TappingOff=0
read TopEdge=1700
read TouchpadOff=0
read UpDownScrolling=1
read VScrollEmuOff=0
read VertScrollDelta=100
read VertScrollDelta=100
Hardware properties:
No touchpad found
Do you use a newer kernel than 2.4?
Then browse the messages or boot.msg for the hardware info
Hardware properties:
No touchpad found
Do you use a newer kernel than 2.4?
Then browse the messages or boot.msg for the hardware info
wundert mich.
Anscheinen stimmt da was nicht.
Wenn ich qsynaptics verlasse dann bekomme ich folgende Meldung:
Code: Alles auswählen
New HScrollEmuOff is 1
New VScrollEmuOff is 1
syndaemon: Kein Prozess abgebrochen
retVal is 0
activate AND save changes...
syndaemon: Kein Prozess abgebrochen
retVal is 0
-
- Beiträge: 283
- Registriert: 16.10.2003 10:25:15