Ausgangslage:
IBM TP560 Notebook (Pentium 1, 133MHz, 40MB RAM, 1GB HD, KEIN CDROM, noch kein Netzwerk ausser lo)
Floppy OK
Installiertes System Debian 3.0r6, bootet soweit ersichtlich fehlerfrei.
Problem:
Xircom CE3 PCMCIA Netzwerk Karte soll in Betrieb genommen werden.
lsmod zeigt ein xirc2ps_cs Modul an aber es ist unused, ist es das korrekte für diese Karte?
Ausgabe lsmod:
Code: Alles auswählen
Module Size Used by
nls_cp437 3896 2 (autoclean)
xirc2ps_cs 13952 0 (unused)
ds 6400 2 [xirc2ps_cs]
i82365 22672 2
pcmcia_core 45824 0 [xirc2ps_cs ds i82365]
af_packet 6136 0
Code: Alles auswählen
Linux PCMCIA Card Services 3.1.33
kernel build: 2.2.20-idepci #1 Sat Apr 20 12:45:19 EST 2002
options: [pci] [cardbus] [apm]
Intel ISA/PCI/CardBus PCIC probe:
Cirrus PD6729 rev 00 PCI-to-PCMCIA at slot 00:13, port 0x3e0
host opts [0]: [ring] [1/6/8] [1/20/8]
host opts [1]: [ring] [1/6/8] [1/20/8]
ISA irqs (default) = 3,4,5,7,9,10,11,12 polling interval = 1000 ms
cs: memory probe 0x0d0000-0x0dffff: clean.
xirc2ps_cs.c 1.31 1998/12/09 19:32:55 (dd9jn+kvh)
cs: IO port probe 0x0100-0x04ff: excluding 0x220-0x22f 0x268-0x26f 0x330-0x337 0x388-0x38f 0x3b8-0x3ff 0x4d0-0x4d7
cs: IO port probe 0x0230-0x0267: clean.
cs: IO port probe 0x0270-0x032f: clean.
cs: IO port probe 0x0338-0x0387: clean.
cs: IO port probe 0x0390-0x03b7: clean.
cs: IO port probe 0x0400-0x04cf: clean.
cs: IO port probe 0x04d8-0x04ff: clean.
cs: IO port probe 0x0800-0x08ff: clean.
cs: IO port probe 0x0a00-0x0aff: clean.
cs: IO port probe 0x0c00-0x0cff: excluding 0xcf8-0xcff
eth0: Xircom: port 0x300, irq 3, hwaddr 00:80:C7:3E:17:78
ifup eth0 bringt die Mledung, dass dieses bereits konfiguriert sei.
(Installiert wurde das System in einem anderen Notebook, falls dies wichtig ist)