Ich habe eine Open Media Vault Nas mit einem Raid5 aus 4x 3TB HDD's. Mir ist beim Aufräumen eine Platte herausgefallen , Ich habe die Platte wieder eingebaut nur jetzt wird sie nicht mehr als Platte im RAID angezeigt, obwohl sie in der Disk-Übersicht als Vollkommen funktionstüchtig angezeigt wird... Ich werde aus der ganzen sache einfac nicht schlau! Die Nas funktioniert noch einwandfrei (Ich kann Daten ohne Probleme drauf und Runter Schieben). vieleicht kann mir ja jemand weiter helfen!
Code: Alles auswählen
root@Parkplatz:~# cat /proc/mdstat
Personalities : [raid6] [raid5] [raid4]
md0 : active raid5 sdc[1] sde[3] sdd[2]
8790405120 blocks super 1.2 level 5, 512k chunk, algorithm 2 [4/3] [_UUU]
unused devices: <none>
Code: Alles auswählen
root@Parkplatz:~# blkid
/dev/sda1: UUID="99f7e158-3e18-4798-aaf1-8c0c177bbc49" TYPE="ext4"
/dev/sda5: UUID="ecd92541-451d-4907-a5b7-53b930fcdb28" TYPE="swap"
/dev/sdc: UUID="cbb0c15c-5402-f3f1-04b3-c106f9e3153c" UUID_SUB="e3043537-d4e7-5b7d-735f-a5d09a48e232" LABEL="Parkplatz:Daten" TYPE="linux_raid_member"
/dev/sdd: UUID="cbb0c15c-5402-f3f1-04b3-c106f9e3153c" UUID_SUB="f13ba75e-544f-0c8d-cf7c-cc823a749bc0" LABEL="Parkplatz:Daten" TYPE="linux_raid_member"
/dev/sde: UUID="cbb0c15c-5402-f3f1-04b3-c106f9e3153c" UUID_SUB="3132deea-eda2-bfa3-74cd-55d739c8b6a3" LABEL="Parkplatz:Daten" TYPE="linux_raid_member"
/dev/md0: LABEL="Daten" UUID="f318cc62-a02c-4646-ac3b-def27e4d5be8" TYPE="ext4"
/dev/sdb: UUID="cbb0c15c-5402-f3f1-04b3-c106f9e3153c" UUID_SUB="8db274f8-7b13-8259-d99e-178b985f9d9d" LABEL="Parkplatz:Daten" TYPE="linux_raid_member"
Code: Alles auswählen
root@Parkplatz:~# fdisk -l | grep "Disk "
Disk /dev/sdd doesn't contain a valid partition table
Disk /dev/sdc doesn't contain a valid partition table
Disk /dev/sde doesn't contain a valid partition table
Disk /dev/sdb doesn't contain a valid partition table
Disk /dev/md0 doesn't contain a valid partition table
Disk /dev/sda: 500.1 GB, 500107862016 bytes
Disk identifier: 0x0005d4c1
Disk /dev/sdd: 3000.6 GB, 3000592982016 bytes
Disk identifier: 0x00000000
Disk /dev/sdc: 3000.6 GB, 3000592982016 bytes
Disk identifier: 0x00000000
Disk /dev/sde: 3000.6 GB, 3000592982016 bytes
Disk identifier: 0x00000000
Disk /dev/sdb: 3000.6 GB, 3000592982016 bytes
Disk identifier: 0x00000000
Disk /dev/md0: 9001.4 GB, 9001374842880 bytes
Disk identifier: 0x00000000
Code: Alles auswählen
root@Parkplatz:~# cat /etc/mdadm/mdadm.conf
# mdadm.conf
#
# Please refer to mdadm.conf(5) for information about this file.
#
# by default, scan all partitions (/proc/partitions) for MD superblocks.
# alternatively, specify devices to scan, using wildcards if desired.
# Note, if no DEVICE line is present, then "DEVICE partitions" is assumed.
# To avoid the auto-assembly of RAID devices a pattern that CAN'T match is
# used if no RAID devices are configured.
DEVICE partitions
# auto-create devices with Debian standard permissions
CREATE owner=root group=disk mode=0660 auto=yes
# automatically tag new arrays as belonging to the local system
HOMEHOST <system>
# definitions of existing MD arrays
ARRAY /dev/md0 metadata=1.2 name=Parkplatz:Daten UUID=cbb0c15c:5402f3f1:04b3c106:f9e3153c
Code: Alles auswählen
root@Parkplatz:~# mdadm --detail --scan --verbose
ARRAY /dev/md0 level=raid5 num-devices=4 metadata=1.2 name=Parkplatz:Daten UUID=cbb0c15c:5402f3f1:04b3c106:f9e3153c
devices=/dev/sdc,/dev/sdd,/dev/sde