[gelöst] Samsung CLX3185W - Scanner nicht erkannt...
[gelöst] Samsung CLX3185W - Scanner nicht erkannt...
Hallo.
Ich hab heute einen Samsung CLX-3185W hier zum Testen. Den Drucker krieg ich mit dem Unified Treiber zum Laufen - den Scanner nicht... Die Infos in der Wiki mit dem Wechseln der netdiscovery hab ich schon probiert, aber SimpleScan bzw. Xsane finden den Scanner nicht.
Hat jemand bitte nen Tip für mich?
sane-find-scanner
# sane-find-scanner will now attempt to detect your scanner. If the # result is different from what you expected, first make sure your # scanner is powered up and properly connected to your computer.
# No SCSI scanners found. If you expected something different, make sure that # you have loaded a kernel SCSI driver for your SCSI adapter. # Also you need support for SCSI Generic (sg) in your operating system. # If using Linux, try "modprobe sg".
found USB scanner (vendor=0x0483 [STMicroelectronics], product=0x2016 [Biometric Coprocessor]) at libusb:005:002 found USB scanner (vendor=0x04e8 [Samsung Electronics Co., Ltd.], product=0x343d [CLX-3180 Series]) at libusb:001:006 # Your USB scanner was (probably) detected. It may or may not be supported by # SANE. Try scanimage -L and read the backend's manpage.
Lt. dieser Amazon-Rezi sollt' es aber gehen...
http://www.amazon.de/gp/aw/cr/rR2I0EMM288J27H
Ich hab heute einen Samsung CLX-3185W hier zum Testen. Den Drucker krieg ich mit dem Unified Treiber zum Laufen - den Scanner nicht... Die Infos in der Wiki mit dem Wechseln der netdiscovery hab ich schon probiert, aber SimpleScan bzw. Xsane finden den Scanner nicht.
Hat jemand bitte nen Tip für mich?
sane-find-scanner
# sane-find-scanner will now attempt to detect your scanner. If the # result is different from what you expected, first make sure your # scanner is powered up and properly connected to your computer.
# No SCSI scanners found. If you expected something different, make sure that # you have loaded a kernel SCSI driver for your SCSI adapter. # Also you need support for SCSI Generic (sg) in your operating system. # If using Linux, try "modprobe sg".
found USB scanner (vendor=0x0483 [STMicroelectronics], product=0x2016 [Biometric Coprocessor]) at libusb:005:002 found USB scanner (vendor=0x04e8 [Samsung Electronics Co., Ltd.], product=0x343d [CLX-3180 Series]) at libusb:001:006 # Your USB scanner was (probably) detected. It may or may not be supported by # SANE. Try scanimage -L and read the backend's manpage.
Lt. dieser Amazon-Rezi sollt' es aber gehen...
http://www.amazon.de/gp/aw/cr/rR2I0EMM288J27H
Zuletzt geändert von nightwing am 23.12.2011 05:43:42, insgesamt 1-mal geändert.
Re: Samsung CLX3185W - Scanner nicht erkannt...
Kannst Du nur als normaler User nicht scannen oder auch als root nicht?
Poste mal bitte die Ausgaben von , sowie .
mfG. haber
Poste mal bitte die Ausgaben von
Code: Alles auswählen
lsusb
Code: Alles auswählen
modprobe usblp
Code: Alles auswählen
lpstat -p
mfG. haber
Re: Samsung CLX3185W - Scanner nicht erkannt...
Hallo.
lsusb sagt:
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 002: ID 0483:2016 SGS Thomson Microelectronics Fingerprint Reader
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 0af0:6701 Option
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 007: ID 04e8:343d Samsung Electronics Co., Ltd
Bus 001 Device 006: ID 090c:1000 Silicon Motion, Inc. - Taiwan (formerly Feiya Technology Corp.) 64MB QDI U2 DISK
Bus 001 Device 005: ID 046d:c52b Logitech, Inc. Unifying Receiver
Bus 001 Device 003: ID 04b3:4485 IBM Corp. Serial Converter
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
lpstat -p sagt:
Drucker „Samsung-CLX-3185W“ ist inaktiv; aktiviert seit Mi 21 Dez 2011 21:07:48 CET
modprobe usblp nimmt er als normaler User nicht - da sagt er, daß er das Kommando nicht findet.
Als root:
WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/.
xsane bzw. simple-scan finden auch als root keinen Scanner!
lsusb sagt:
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 002: ID 0483:2016 SGS Thomson Microelectronics Fingerprint Reader
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 0af0:6701 Option
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 007: ID 04e8:343d Samsung Electronics Co., Ltd
Bus 001 Device 006: ID 090c:1000 Silicon Motion, Inc. - Taiwan (formerly Feiya Technology Corp.) 64MB QDI U2 DISK
Bus 001 Device 005: ID 046d:c52b Logitech, Inc. Unifying Receiver
Bus 001 Device 003: ID 04b3:4485 IBM Corp. Serial Converter
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
lpstat -p sagt:
Drucker „Samsung-CLX-3185W“ ist inaktiv; aktiviert seit Mi 21 Dez 2011 21:07:48 CET
modprobe usblp nimmt er als normaler User nicht - da sagt er, daß er das Kommando nicht findet.
Als root:
WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/.
xsane bzw. simple-scan finden auch als root keinen Scanner!
Re: Samsung CLX3185W - Scanner nicht erkannt...
Als potentielles Gerät wird er ja erkannt,found USB scanner (vendor=0x04e8 [Samsung Electronics Co., Ltd.], product=0x343d [CLX-3180 Series])
was sagt denn das vorgeschlagene 'scanimage -L'?
Gerade mal
$ aptitude download libsane libsane-extras sane sane-utils
und entpackt.
In den Paketen findet sich kein "343d".
Auf http://www.sane-project.org/sane-mfgs.html sind 2 "CLX",
alle samsung mit dem xerox-Backend.
Eventuell kannst Du 04e8:343d den Dateien
xerox-mfp.conf
60-libsane.rules
20-libsane.fdi
hinzufügen resp. in zusätzliche entsprechenden Dateien einarbeiten.
Es würde dann das backend verwendet,
ob es aber funktioniert ist ?
(Entspricht ja diesem http://ubuntuforums.org/showthread.php?t=1660550 (google "sane CLX-3185"),
auch noch ein von samsung angebotenes Paket
http://www.samsung.com/hk_en/consumer/c ... ab=support
(wobei Installationsskripte solcher Pakete auf debian manchmal Unfug machen))
---------------------
Doppelpost
http://forum.ubuntuusers.de/topic/samsu ... st-3768337
Aussage Samsung:
Kompatibilität OS-Kompatibilität: Windows 2000/XP/2003/Vista/2008, Windows 7/2008 R2(64bit), verschiedene Linux OS inkl. Fedora 2~10, OpenSuSE 9.1~9.3, 10.0~10.3, 11.0, 11.1, Ubuntu 6.0, 6.10, 7.04, 7.10, 8.04, 8.10, Mandriva 10.0, 10.1, 2005~2008, Debian 3.1, 4.0, 5.0, RedHat Enterprise Desktop 9,10 (32/64bit), SuSE Linux 9.1 (32bit), Mandrake 10.0, 10.1 (32/64bit); Mac OS X 10.3~10.6; WHQL: Windows 2000, XP, Vista, 2003, 2008, Windows 7/2008 R2; Smart Panel: Windows, Linux, Macintosh
Das könntest Du mal sichten und fixen.WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/.
mfg rendegast
-----------------------
Viel Eifer, viel Irrtum; weniger Eifer, weniger Irrtum; kein Eifer, kein Irrtum.
(Lin Yutang "Moment in Peking")
-----------------------
Viel Eifer, viel Irrtum; weniger Eifer, weniger Irrtum; kein Eifer, kein Irrtum.
(Lin Yutang "Moment in Peking")
Re: Samsung CLX3185W - Scanner nicht erkannt...
Sieht mir nach fehlender udev-Regel aus.
Guck mal bitte in der /lib/udev/rules.d/60-libsane.rules nach,ob er eingetragen ist.
Was steht denn in der /var/log/cups/error_log?
mfG. haber
Guck mal bitte in der /lib/udev/rules.d/60-libsane.rules nach,ob er eingetragen ist.
Was steht denn in der /var/log/cups/error_log?
mfG. haber
Re: Samsung CLX3185W - Scanner nicht erkannt...
Danke für Deinen Post.
scanimage -L
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
Auf http://www.sane-project.org/sane-mfgs.html sind 2 "CLX",
alle samsung mit dem xerox-Backend.
Eventuell kannst Du 04e8:343d den Dateien
xerox-mfp.conf
60-libsane.rules
20-libsane.fdi
hinzufügen resp. in zusätzliche entsprechenden Dateien einarbeiten.
Da komm ich jetzt nicht ganz mit. Das mit der xerox-mfp hab ich gemacht.
Aber es ändert sich leider gar nichts. Den ubuntuforums-thread hab ich mir mal durchgelesen. Aber bei mir gibts die Gruppe scanner und ich bin auch drinne.
scanimage -L
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
Auf http://www.sane-project.org/sane-mfgs.html sind 2 "CLX",
alle samsung mit dem xerox-Backend.
Eventuell kannst Du 04e8:343d den Dateien
xerox-mfp.conf
60-libsane.rules
20-libsane.fdi
hinzufügen resp. in zusätzliche entsprechenden Dateien einarbeiten.
Da komm ich jetzt nicht ganz mit. Das mit der xerox-mfp hab ich gemacht.
Aber es ändert sich leider gar nichts. Den ubuntuforums-thread hab ich mir mal durchgelesen. Aber bei mir gibts die Gruppe scanner und ich bin auch drinne.
Re: Samsung CLX3185W - Scanner nicht erkannt...
Muß auch hinzufügen, daß ich vorher ein Brother MFC (Tintenstrahler) hat und das hat alles gefunzt.
Re: Samsung CLX3185W - Scanner nicht erkannt...
device `smfp:SAMSUNG CLX-3180 Series on USB:0' is a SAMSUNG CLX-3180 Series on USB:0 Flatbed Scanner
device `smfp:SAMSUNG CLX-3180 on 192.168.0.5' is a SAMSUNG CLX-3180 on 192.168.0.5 Flatbed Scanner
device `xerox_mfp:libusb:001:006' is a Samsung Samsung CLX-3180 Series multi-function peripheral
meldet scanimage -L nun...
sane-find-scanner
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a kernel SCSI driver for your SCSI adapter.
# Also you need support for SCSI Generic (sg) in your operating system.
# If using Linux, try "modprobe sg".
found USB scanner (vendor=0x0483 [STMicroelectronics], product=0x2016 [Biometric Coprocessor]) at libusb:005:002
found USB scanner (vendor=0x04e8 [Samsung Electronics Co., Ltd.], product=0x343d [CLX-3180 Series]) at libusb:001:006
# Your USB scanner was (probably) detected. It may or may not be supported by
# SANE. Try scanimage -L and read the backend's manpage.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.
# You may want to run this program as root to find all devices. Once you
# found the scanner devices, be sure to adjust access permissions as
# necessary.
device `smfp:SAMSUNG CLX-3180 on 192.168.0.5' is a SAMSUNG CLX-3180 on 192.168.0.5 Flatbed Scanner
device `xerox_mfp:libusb:001:006' is a Samsung Samsung CLX-3180 Series multi-function peripheral
meldet scanimage -L nun...
sane-find-scanner
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a kernel SCSI driver for your SCSI adapter.
# Also you need support for SCSI Generic (sg) in your operating system.
# If using Linux, try "modprobe sg".
found USB scanner (vendor=0x0483 [STMicroelectronics], product=0x2016 [Biometric Coprocessor]) at libusb:005:002
found USB scanner (vendor=0x04e8 [Samsung Electronics Co., Ltd.], product=0x343d [CLX-3180 Series]) at libusb:001:006
# Your USB scanner was (probably) detected. It may or may not be supported by
# SANE. Try scanimage -L and read the backend's manpage.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.
# You may want to run this program as root to find all devices. Once you
# found the scanner devices, be sure to adjust access permissions as
# necessary.
Re: Samsung CLX3185W - Scanner nicht erkannt...
Hab's hingekriegt. Nun scannt und druckt er sogar per WLAN.
Der Schlüssel lag in den einz. in dem von Dir geposteten Thread genannten Dateien und in der CUPS-Installation.
Vielen Dank!
Gruß
nightwing
Der Schlüssel lag in den einz. in dem von Dir geposteten Thread genannten Dateien und in der CUPS-Installation.
Vielen Dank!
Gruß
nightwing