SMART HDD2
von Sv3n- SNIPPET_TEXT:
-
- === START OF INFORMATION SECTION ===
- Model Family: SAMSUNG SpinPoint F3 EG
- Device Model: SAMSUNG HD203WI
- Serial Number: S1UYJDWZ726095
- LU WWN Device Id: 5 0024e9 003c96a0d
- Firmware Version: 1AN10003
- User Capacity: 2.000.398.934.016 bytes [2,00 TB]
- Sector Size: 512 bytes logical/physical
- Rotation Rate: 5400 rpm
- Form Factor: 3.5 inches
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: ATA8-ACS T13/1699-D revision 6
- SATA Version is: SATA 2.6, 3.0 Gb/s
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x82) Offline data collection activity
- was completed without error.
- Auto Offline Data Collection: Enabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: (26700) seconds.
- Offline data collection
- capabilities: (0x5b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- No Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- Extended self-test routine
- SCT capabilities: (0x003f) SCT Status supported.
- SCT Error Recovery Control supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 1 Raw_Read_Error_Rate 0x002f 100 100 051 Pre-fail Always - 2313
- 2 Throughput_Performance 0x0026 252 252 000 Old_age Always - 0
- 3 Spin_Up_Time 0x0023 060 054 025 Pre-fail Always - 12389
- 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 704
- 5 Reallocated_Sector_Ct 0x0033 252 252 010 Pre-fail Always - 0
- 7 Seek_Error_Rate 0x002e 252 252 051 Old_age Always - 0
- 8 Seek_Time_Performance 0x0024 252 252 015 Old_age Offline - 0
- 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 28587
- 10 Spin_Retry_Count 0x0032 252 252 051 Old_age Always - 0
- 11 Calibration_Retry_Count 0x0032 252 252 000 Old_age Always - 0
- 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 804
- 191 G-Sense_Error_Rate 0x0022 100 100 000 Old_age Always - 212
- 192 Power-Off_Retract_Count 0x0022 252 252 000 Old_age Always - 0
- 195 Hardware_ECC_Recovered 0x003a 100 100 000 Old_age Always - 0
- 196 Reallocated_Event_Count 0x0032 252 252 000 Old_age Always - 0
- 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 5
- 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 5
- 199 UDMA_CRC_Error_Count 0x0036 100 100 000 Old_age Always - 1
- 200 Multi_Zone_Error_Rate 0x002a 100 100 000 Old_age Always - 5149
- 223 Load_Retry_Count 0x0032 252 252 000 Old_age Always - 0
- 225 Load_Cycle_Count 0x0032 099 099 000 Old_age Always - 15351
- No Errors Logged
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Short offline Completed without error 00% 25815 -
- # 2 Short offline Completed without error 00% 25799 -
- # 3 Short offline Completed without error 00% 25511 -
- # 4 Short offline Completed without error 00% 25324 -
- # 5 Short offline Interrupted (host reset) 90% 25246 -
- Note: revision number not 1 implies that no selective self-test has ever been run
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Completed [00% left] (0-65535)
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
Quellcode
Hier kannst du den Code kopieren und ihn in deinen bevorzugten Editor einfügen. PASTEBIN_DOWNLOAD_SNIPPET_EXPLAIN