dmesg
von nahemoth- SNIPPET_TEXT:
-
- [ 0.000000] random: get_random_bytes called from start_kernel+0x3d/0x456 with crng_init=0
- [ 0.000000] Linux version 4.13.0-1-amd64 (debian-kernel@lists.debian.org) (gcc version 6.4.0 20171010 (Debian 6.4.0-8)) #1 SMP Debian 4.13.4-2 (2017-10-15)
- [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.13.0-1-amd64 root=UUID=b91cd54e-c4e3-496b-b6c2-b1269e1fb5ab ro quiet
- [ 0.000000] x86/fpu: x87 FPU will use FXSAVE
- [ 0.000000] e820: BIOS-provided physical RAM map:
- [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
- [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cff7ffff] usable
- [ 0.000000] BIOS-e820: [mem 0x00000000cff80000-0x00000000cff8dfff] ACPI data
- [ 0.000000] BIOS-e820: [mem 0x00000000cff8e000-0x00000000cffdffff] ACPI NVS
- [ 0.000000] BIOS-e820: [mem 0x00000000cffe0000-0x00000000cfffffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000022fffffff] usable
- [ 0.000000] NX (Execute Disable) protection: active
- [ 0.000000] random: fast init done
- [ 0.000000] SMBIOS 2.4 present.
- [ 0.000000] DMI: exone P5E/P5E, BIOS 0601 01/24/2008
- [ 0.000000] tsc: Fast TSC calibration using PIT
- [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
- [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
- [ 0.000000] e820: last_pfn = 0x230000 max_arch_pfn = 0x400000000
- [ 0.000000] MTRR default type: uncachable
- [ 0.000000] MTRR fixed ranges enabled:
- [ 0.000000] 00000-9FFFF write-back
- [ 0.000000] A0000-BFFFF uncachable
- [ 0.000000] C0000-DFFFF write-protect
- [ 0.000000] E0000-EFFFF write-through
- [ 0.000000] F0000-FFFFF write-protect
- [ 0.000000] MTRR variable ranges enabled:
- [ 0.000000] 0 base 0D0000000 mask FF0000000 uncachable
- [ 0.000000] 1 base 0E0000000 mask FE0000000 uncachable
- [ 0.000000] 2 base 000000000 mask E00000000 write-back
- [ 0.000000] 3 base 200000000 mask FE0000000 write-back
- [ 0.000000] 4 base 220000000 mask FF0000000 write-back
- [ 0.000000] 5 disabled
- [ 0.000000] 6 disabled
- [ 0.000000] 7 disabled
- [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
- [ 0.000000] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
- [ 0.000000] e820: last_pfn = 0xcff80 max_arch_pfn = 0x400000000
- [ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff9ef2c00ff780]
- [ 0.000000] Base memory trampoline at [ffff9ef2c0099000] 99000 size 24576
- [ 0.000000] BRK [0x1d2d57000, 0x1d2d57fff] PGTABLE
- [ 0.000000] BRK [0x1d2d58000, 0x1d2d58fff] PGTABLE
- [ 0.000000] BRK [0x1d2d59000, 0x1d2d59fff] PGTABLE
- [ 0.000000] BRK [0x1d2d5a000, 0x1d2d5afff] PGTABLE
- [ 0.000000] BRK [0x1d2d5b000, 0x1d2d5bfff] PGTABLE
- [ 0.000000] BRK [0x1d2d5c000, 0x1d2d5cfff] PGTABLE
- [ 0.000000] BRK [0x1d2d5d000, 0x1d2d5dfff] PGTABLE
- [ 0.000000] BRK [0x1d2d5e000, 0x1d2d5efff] PGTABLE
- [ 0.000000] BRK [0x1d2d5f000, 0x1d2d5ffff] PGTABLE
- [ 0.000000] RAMDISK: [mem 0x35aa7000-0x36d4afff]
- [ 0.000000] ACPI: Early table checksum verification disabled
- [ 0.000000] ACPI: RSDP 0x00000000000FBE10 000014 (v00 ACPIAM)
- [ 0.000000] ACPI: RSDT 0x00000000CFF80000 00003C (v01 A_M_I_ OEMRSDT 01000824 MSFT 00000097)
- [ 0.000000] ACPI: FACP 0x00000000CFF80200 000084 (v02 A_M_I_ OEMFACP 01000824 MSFT 00000097)
- [ 0.000000] ACPI: DSDT 0x00000000CFF80440 00A05A (v01 A0905 A0905002 00000002 INTL 20060113)
- [ 0.000000] ACPI: FACS 0x00000000CFF8E000 000040
- [ 0.000000] ACPI: APIC 0x00000000CFF80390 00006C (v01 A_M_I_ OEMAPIC 01000824 MSFT 00000097)
- [ 0.000000] ACPI: MCFG 0x00000000CFF80400 00003C (v01 A_M_I_ OEMMCFG 01000824 MSFT 00000097)
- [ 0.000000] ACPI: OEMB 0x00000000CFF8E040 000081 (v01 A_M_I_ AMI_OEM 01000824 MSFT 00000097)
- [ 0.000000] ACPI: HPET 0x00000000CFF8A4A0 000038 (v01 A_M_I_ OEMHPET 01000824 MSFT 00000097)
- [ 0.000000] ACPI: OSFR 0x00000000CFF8A4E0 0000B0 (v01 A_M_I_ OEMOSFR 01000824 MSFT 00000097)
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] No NUMA configuration found
- [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000022fffffff]
- [ 0.000000] NODE_DATA(0) allocated [mem 0x22fff7000-0x22fffbfff]
- [ 0.000000] Zone ranges:
- [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
- [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
- [ 0.000000] Normal [mem 0x0000000100000000-0x000000022fffffff]
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
- [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000cff7ffff]
- [ 0.000000] node 0: [mem 0x0000000100000000-0x000000022fffffff]
- [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000022fffffff]
- [ 0.000000] On node 0 totalpages: 2096926
- [ 0.000000] DMA zone: 64 pages used for memmap
- [ 0.000000] DMA zone: 21 pages reserved
- [ 0.000000] DMA zone: 3998 pages, LIFO batch:0
- [ 0.000000] DMA32 zone: 13246 pages used for memmap
- [ 0.000000] DMA32 zone: 847744 pages, LIFO batch:31
- [ 0.000000] Normal zone: 19456 pages used for memmap
- [ 0.000000] Normal zone: 1245184 pages, LIFO batch:31
- [ 0.000000] ACPI: PM-Timer IO Port: 0x808
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
- [ 0.000000] ACPI: IRQ0 used by override.
- [ 0.000000] ACPI: IRQ9 used by override.
- [ 0.000000] Using ACPI (MADT) for SMP configuration information
- [ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
- [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
- [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xcff80000-0xcff8dfff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xcff8e000-0xcffdffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xcffe0000-0xcfffffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xdfffffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfedfffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffdfffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xffe00000-0xffffffff]
- [ 0.000000] e820: [mem 0xd0000000-0xdfffffff] available for PCI devices
- [ 0.000000] Booting paravirtualized kernel on bare hardware
- [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
- [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
- [ 0.000000] percpu: Embedded 38 pages/cpu @ffff9ef4efc00000 s115224 r8192 d32232 u524288
- [ 0.000000] pcpu-alloc: s115224 r8192 d32232 u524288 alloc=1*2097152
- [ 0.000000] pcpu-alloc: [0] 0 1 2 3
- [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2064139
- [ 0.000000] Policy zone: Normal
- [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.13.0-1-amd64 root=UUID=b91cd54e-c4e3-496b-b6c2-b1269e1fb5ab ro quiet
- [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
- [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
- [ 0.000000] Memory: 8155052K/8387704K available (6587K kernel code, 1153K rwdata, 2964K rodata, 1472K init, 696K bss, 232652K reserved, 0K cma-reserved)
- [ 0.000000] ftrace: allocating 28602 entries in 112 pages
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
- [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
- [ 0.000000] NR_IRQS: 33024, nr_irqs: 456, preallocated irqs: 16
- [ 0.000000] Console: colour VGA+ 80x25
- [ 0.000000] console [tty0] enabled
- [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
- [ 0.000000] hpet clockevent registered
- [ 0.000000] tsc: Fast TSC calibration using PIT
- [ 0.004000] tsc: Detected 3005.553 MHz processor
- [ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6011.10 BogoMIPS (lpj=12022212)
- [ 0.004000] pid_max: default: 32768 minimum: 301
- [ 0.004000] ACPI: Core revision 20170531
- [ 0.011389] ACPI: 1 ACPI AML tables successfully acquired and loaded
- [ 0.011438] Security Framework initialized
- [ 0.011439] Yama: disabled by default; enable with sysctl kernel.yama.*
- [ 0.016224] CPU: Physical Processor ID: 0
- [ 0.016225] CPU: Processor Core ID: 0
- [ 0.016226] mce: CPU supports 6 MCE banks
- [ 0.016233] CPU0: Thermal monitoring enabled (TM2)
- [ 0.016235] process: using mwait in idle threads
- [ 0.016239] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
- [ 0.016240] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
- [ 0.016341] Freeing SMP alternatives memory: 28K
- [ 0.020446] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
- [ 0.064000] APIC calibration not consistent with PM-Timer: 115ms instead of 100ms
- [ 0.064000] APIC delta adjusted to PM-Timer: 2087191 (2421104)
- [ 0.064000] smpboot: CPU0: Intel(R) Core(TM)2 Extreme CPU X9650 @ 3.00GHz (family: 0x6, model: 0x17, stepping: 0x6)
- [ 0.064000] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
- [ 0.064000] ... version: 2
- [ 0.064000] ... bit width: 40
- [ 0.064000] ... generic registers: 2
- [ 0.064000] ... value mask: 000000ffffffffff
- [ 0.064000] ... fixed-purpose events: 3
- [ 0.064000] ... event mask: 0000000700000003
- [ 0.064000] Hierarchical SRCU implementation.
- [ 0.064000] smp: Bringing up secondary CPUs ...
- [ 0.064000] x86: Booting SMP configuration:
- [ 0.064000] .... node #0, CPUs: #1
- [ 0.142021] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
- [ 0.142021] #2 #3
- [ 0.302020] smp: Brought up 1 node, 4 CPUs
- [ 0.302020] smpboot: Total of 4 processors activated (24044.41 BogoMIPS)
- [ 0.304452] devtmpfs: initialized
- [ 0.304452] x86/mm: Memory block size: 128MB
- [ 0.308243] PM: Registering ACPI NVS region [mem 0xcff8e000-0xcffdffff] (335872 bytes)
- [ 0.308243] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
- [ 0.308243] pinctrl core: initialized pinctrl subsystem
- [ 0.308243] NET: Registered protocol family 16
- [ 0.308388] cpuidle: using governor ladder
- [ 0.308388] cpuidle: using governor menu
- [ 0.308388] ACPI: bus type PCI registered
- [ 0.308388] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
- [ 0.308388] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
- [ 0.308388] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
- [ 0.308388] pmd_set_huge: Cannot satisfy [mem 0xe0000000-0xe0200000] with a huge-page mapping due to MTRR override.
- [ 0.308388] PCI: Using configuration type 1 for base access
- [ 0.308862] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
- [ 0.308862] ACPI: Added _OSI(Module Device)
- [ 0.308862] ACPI: Added _OSI(Processor Device)
- [ 0.308862] ACPI: Added _OSI(3.0 _SCP Extensions)
- [ 0.308862] ACPI: Added _OSI(Processor Aggregator Device)
- [ 0.308862] ACPI: Executed 1 blocks of module-level executable AML code
- [ 0.315677] ACPI: Dynamic OEM Table Load:
- [ 0.315682] ACPI: SSDT 0xFFFF9EF4E5CA0400 0001D2 (v01 AMI CPU1PM 00000001 INTL 20060113)
- [ 0.315883] ACPI: Dynamic OEM Table Load:
- [ 0.315886] ACPI: SSDT 0xFFFF9EF4E711A200 000143 (v01 AMI CPU2PM 00000001 INTL 20060113)
- [ 0.316085] ACPI: Dynamic OEM Table Load:
- [ 0.316088] ACPI: SSDT 0xFFFF9EF4E711AC00 000143 (v01 AMI CPU3PM 00000001 INTL 20060113)
- [ 0.316280] ACPI: Dynamic OEM Table Load:
- [ 0.316283] ACPI: SSDT 0xFFFF9EF4E711A000 000143 (v01 AMI CPU4PM 00000001 INTL 20060113)
- [ 0.316590] ACPI: Interpreter enabled
- [ 0.316607] ACPI: (supports S0 S1 S3 S4 S5)
- [ 0.316608] ACPI: Using IOAPIC for interrupt routing
- [ 0.316632] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
- [ 0.323052] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
- [ 0.323056] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
- [ 0.323060] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
- [ 0.323258] PCI host bridge to bus 0000:00
- [ 0.323260] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
- [ 0.323261] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
- [ 0.323262] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
- [ 0.323263] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
- [ 0.323265] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xffffffff window]
- [ 0.323266] pci_bus 0000:00: root bus resource [bus 00-ff]
- [ 0.323273] pci 0000:00:00.0: [8086:29e0] type 00 class 0x060000
- [ 0.323355] pci 0000:00:01.0: [8086:29e1] type 01 class 0x060400
- [ 0.323384] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
- [ 0.323472] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
- [ 0.323506] pci 0000:00:1a.0: reg 0x20: [io 0xa800-0xa81f]
- [ 0.323603] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
- [ 0.323638] pci 0000:00:1a.1: reg 0x20: [io 0xa880-0xa89f]
- [ 0.323733] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
- [ 0.323767] pci 0000:00:1a.2: reg 0x20: [io 0xac00-0xac1f]
- [ 0.323866] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
- [ 0.323884] pci 0000:00:1a.7: reg 0x10: [mem 0xf9fffc00-0xf9ffffff]
- [ 0.323950] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
- [ 0.324028] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
- [ 0.324044] pci 0000:00:1b.0: reg 0x10: [mem 0xf9ff8000-0xf9ffbfff 64bit]
- [ 0.324100] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
- [ 0.324170] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
- [ 0.324227] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
- [ 0.324302] pci 0000:00:1c.2: [8086:2944] type 01 class 0x060400
- [ 0.324360] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
- [ 0.324436] pci 0000:00:1c.4: [8086:2948] type 01 class 0x060400
- [ 0.324493] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
- [ 0.324569] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
- [ 0.324604] pci 0000:00:1d.0: reg 0x20: [io 0xa080-0xa09f]
- [ 0.324697] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
- [ 0.324732] pci 0000:00:1d.1: reg 0x20: [io 0xa400-0xa41f]
- [ 0.324825] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
- [ 0.324859] pci 0000:00:1d.2: reg 0x20: [io 0xa480-0xa49f]
- [ 0.324957] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
- [ 0.324974] pci 0000:00:1d.7: reg 0x10: [mem 0xf9fff800-0xf9fffbff]
- [ 0.325041] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
- [ 0.325110] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
- [ 0.325215] pci 0000:00:1f.0: [8086:2916] type 00 class 0x060100
- [ 0.325283] pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO
- [ 0.325287] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO
- [ 0.325289] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
- [ 0.325375] pci 0000:00:1f.2: [8086:2920] type 00 class 0x01018f
- [ 0.325388] pci 0000:00:1f.2: reg 0x10: [io 0x9000-0x9007]
- [ 0.325393] pci 0000:00:1f.2: reg 0x14: [io 0x8c00-0x8c03]
- [ 0.325399] pci 0000:00:1f.2: reg 0x18: [io 0x8880-0x8887]
- [ 0.325404] pci 0000:00:1f.2: reg 0x1c: [io 0x8800-0x8803]
- [ 0.325410] pci 0000:00:1f.2: reg 0x20: [io 0x8480-0x848f]
- [ 0.325415] pci 0000:00:1f.2: reg 0x24: [io 0x8400-0x840f]
- [ 0.325501] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
- [ 0.325515] pci 0000:00:1f.3: reg 0x10: [mem 0xf9fff400-0xf9fff4ff 64bit]
- [ 0.325530] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
- [ 0.325604] pci 0000:00:1f.5: [8086:2926] type 00 class 0x010185
- [ 0.325617] pci 0000:00:1f.5: reg 0x10: [io 0xa000-0xa007]
- [ 0.325622] pci 0000:00:1f.5: reg 0x14: [io 0x9c00-0x9c03]
- [ 0.325628] pci 0000:00:1f.5: reg 0x18: [io 0x9880-0x9887]
- [ 0.325633] pci 0000:00:1f.5: reg 0x1c: [io 0x9800-0x9803]
- [ 0.325639] pci 0000:00:1f.5: reg 0x20: [io 0x9480-0x948f]
- [ 0.325644] pci 0000:00:1f.5: reg 0x24: [io 0x9400-0x940f]
- [ 0.325756] pci 0000:01:00.0: [10de:0191] type 00 class 0x030000
- [ 0.325767] pci 0000:01:00.0: reg 0x10: [mem 0xfd000000-0xfdffffff]
- [ 0.325774] pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
- [ 0.325781] pci 0000:01:00.0: reg 0x1c: [mem 0xfa000000-0xfbffffff 64bit]
- [ 0.325786] pci 0000:01:00.0: reg 0x24: [io 0xbc00-0xbc7f]
- [ 0.325790] pci 0000:01:00.0: reg 0x30: [mem 0xfe8e0000-0xfe8fffff pref]
- [ 0.325848] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
- [ 0.325852] pci 0000:00:01.0: PCI bridge to [bus 01]
- [ 0.325854] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff]
- [ 0.325856] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfe8fffff]
- [ 0.325858] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
- [ 0.325892] pci 0000:00:1c.0: PCI bridge to [bus 04]
- [ 0.325898] pci 0000:00:1c.0: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
- [ 0.325945] pci 0000:03:00.0: [11ab:4364] type 00 class 0x020000
- [ 0.325972] pci 0000:03:00.0: reg 0x10: [mem 0xfeafc000-0xfeafffff 64bit]
- [ 0.325982] pci 0000:03:00.0: reg 0x18: [io 0xd800-0xd8ff]
- [ 0.326018] pci 0000:03:00.0: reg 0x30: [mem 0xfeac0000-0xfeadffff pref]
- [ 0.326076] pci 0000:03:00.0: supports D1 D2
- [ 0.326078] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.336015] pci 0000:00:1c.2: PCI bridge to [bus 03]
- [ 0.336018] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
- [ 0.336021] pci 0000:00:1c.2: bridge window [mem 0xfea00000-0xfeafffff]
- [ 0.336086] pci 0000:02:00.0: [197b:2368] type 00 class 0x010185
- [ 0.336122] pci 0000:02:00.0: reg 0x10: [io 0xcc00-0xcc07]
- [ 0.336133] pci 0000:02:00.0: reg 0x14: [io 0xc880-0xc883]
- [ 0.336145] pci 0000:02:00.0: reg 0x18: [io 0xc800-0xc807]
- [ 0.336156] pci 0000:02:00.0: reg 0x1c: [io 0xc480-0xc483]
- [ 0.336168] pci 0000:02:00.0: reg 0x20: [io 0xc400-0xc40f]
- [ 0.336190] pci 0000:02:00.0: reg 0x30: [mem 0xfe9f0000-0xfe9fffff pref]
- [ 0.336288] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
- [ 0.336296] pci 0000:00:1c.4: PCI bridge to [bus 02]
- [ 0.336298] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
- [ 0.336301] pci 0000:00:1c.4: bridge window [mem 0xfe900000-0xfe9fffff]
- [ 0.336339] pci 0000:05:03.0: [1106:3044] type 00 class 0x0c0010
- [ 0.336356] pci 0000:05:03.0: reg 0x10: [mem 0xfebff800-0xfebfffff]
- [ 0.336363] pci 0000:05:03.0: reg 0x14: [io 0xec00-0xec7f]
- [ 0.336421] pci 0000:05:03.0: supports D2
- [ 0.336422] pci 0000:05:03.0: PME# supported from D2 D3hot D3cold
- [ 0.336482] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
- [ 0.336484] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
- [ 0.336487] pci 0000:00:1e.0: bridge window [mem 0xfeb00000-0xfebfffff]
- [ 0.336491] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
- [ 0.336492] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
- [ 0.336493] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
- [ 0.336495] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
- [ 0.336496] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xffffffff window] (subtractive decode)
- [ 0.337634] ACPI: Enabled 3 GPEs in block 00 to 3F
- [ 0.337695] pci 0000:01:00.0: vgaarb: setting as boot VGA device
- [ 0.337695] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
- [ 0.337695] pci 0000:01:00.0: vgaarb: bridge control possible
- [ 0.337695] vgaarb: loaded
- [ 0.337695] EDAC MC: Ver: 3.0.0
- [ 0.337695] PCI: Using ACPI for IRQ routing
- [ 0.342582] PCI: pci_cache_line_size set to 64 bytes
- [ 0.342626] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
- [ 0.342627] e820: reserve RAM buffer [mem 0xcff80000-0xcfffffff]
- [ 0.342717] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
- [ 0.342717] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
- [ 0.342717] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
- [ 0.344035] clocksource: Switched to clocksource hpet
- [ 0.354215] VFS: Disk quotas dquot_6.6.0
- [ 0.354328] pnp: PnP ACPI init
- [ 0.354488] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
- [ 0.354705] pnp 00:02: [dma 2]
- [ 0.354744] pnp 00:02: Plug and Play ACPI device, IDs PNP0700 (active)
- [ 0.355158] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
- [ 0.355736] pnp: PnP ACPI: found 10 devices
- [ 0.361910] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
- [ 0.361926] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000
- [ 0.361929] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 400000 add_align 100000
- [ 0.361935] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
- [ 0.361941] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
- [ 0.361955] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf0000000-0xf03fffff]
- [ 0.361958] pci 0000:00:1c.2: BAR 15: assigned [mem 0xf0400000-0xf05fffff 64bit pref]
- [ 0.361962] pci 0000:00:1c.4: BAR 15: assigned [mem 0xf0600000-0xf07fffff 64bit pref]
- [ 0.361963] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
- [ 0.361966] pci 0000:00:01.0: PCI bridge to [bus 01]
- [ 0.361967] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff]
- [ 0.361970] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfe8fffff]
- [ 0.361971] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
- [ 0.361974] pci 0000:00:1c.0: PCI bridge to [bus 04]
- [ 0.361976] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
- [ 0.361979] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf03fffff]
- [ 0.361981] pci 0000:00:1c.0: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
- [ 0.361985] pci 0000:00:1c.2: PCI bridge to [bus 03]
- [ 0.361987] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
- [ 0.361990] pci 0000:00:1c.2: bridge window [mem 0xfea00000-0xfeafffff]
- [ 0.361993] pci 0000:00:1c.2: bridge window [mem 0xf0400000-0xf05fffff 64bit pref]
- [ 0.361997] pci 0000:00:1c.4: PCI bridge to [bus 02]
- [ 0.361998] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
- [ 0.362001] pci 0000:00:1c.4: bridge window [mem 0xfe900000-0xfe9fffff]
- [ 0.362004] pci 0000:00:1c.4: bridge window [mem 0xf0600000-0xf07fffff 64bit pref]
- [ 0.362008] pci 0000:00:1e.0: PCI bridge to [bus 05]
- [ 0.362010] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
- [ 0.362013] pci 0000:00:1e.0: bridge window [mem 0xfeb00000-0xfebfffff]
- [ 0.362019] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
- [ 0.362020] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
- [ 0.362021] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
- [ 0.362022] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
- [ 0.362024] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xffffffff window]
- [ 0.362025] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff]
- [ 0.362026] pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfe8fffff]
- [ 0.362027] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
- [ 0.362028] pci_bus 0000:04: resource 0 [io 0x1000-0x1fff]
- [ 0.362029] pci_bus 0000:04: resource 1 [mem 0xf0000000-0xf03fffff]
- [ 0.362031] pci_bus 0000:04: resource 2 [mem 0xf8f00000-0xf8ffffff 64bit pref]
- [ 0.362032] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
- [ 0.362033] pci_bus 0000:03: resource 1 [mem 0xfea00000-0xfeafffff]
- [ 0.362034] pci_bus 0000:03: resource 2 [mem 0xf0400000-0xf05fffff 64bit pref]
- [ 0.362035] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
- [ 0.362036] pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff]
- [ 0.362037] pci_bus 0000:02: resource 2 [mem 0xf0600000-0xf07fffff 64bit pref]
- [ 0.362039] pci_bus 0000:05: resource 0 [io 0xe000-0xefff]
- [ 0.362040] pci_bus 0000:05: resource 1 [mem 0xfeb00000-0xfebfffff]
- [ 0.362041] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7 window]
- [ 0.362042] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff window]
- [ 0.362043] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window]
- [ 0.362044] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000dffff window]
- [ 0.362046] pci_bus 0000:05: resource 8 [mem 0xd0000000-0xffffffff window]
- [ 0.362118] NET: Registered protocol family 2
- [ 0.363013] NET: Registered protocol family 1
- [ 0.363990] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
- [ 0.363998] PCI: CLS 32 bytes, default 64
- [ 0.364049] Unpacking initramfs...
- [ 0.665385] Freeing initrd memory: 19088K
- [ 0.665437] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
- [ 0.665440] software IO TLB [mem 0xcbf80000-0xcff80000] (64MB) mapped at [ffff9ef38bf80000-ffff9ef38ff7ffff]
- [ 0.665875] audit: initializing netlink subsys (disabled)
- [ 0.665964] audit: type=2000 audit(1511195571.665:1): state=initialized audit_enabled=0 res=1
- [ 0.666259] workingset: timestamp_bits=40 max_order=21 bucket_order=0
- [ 0.666297] zbud: loaded
- [ 1.025960] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
- [ 1.025988] io scheduler noop registered
- [ 1.025989] io scheduler deadline registered
- [ 1.025997] io scheduler cfq registered (default)
- [ 1.025997] io scheduler mq-deadline registered
- [ 1.026267] pcieport 0000:00:1c.0: enabling device (0106 -> 0107)
- [ 1.026662] intel_idle: does not run on family 6 model 23
- [ 1.026807] GHES: HEST is not enabled!
- [ 1.026862] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- [ 1.027204] Linux agpgart interface v0.103
- [ 1.027264] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
- [ 1.027517] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
- [ 1.027517] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
- [ 1.028010] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 1.028078] mousedev: PS/2 mouse device common for all mice
- [ 1.028107] rtc_cmos 00:01: RTC can wake from S4
- [ 1.028198] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
- [ 1.028219] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
- [ 1.028257] ledtrig-cpu: registered to indicate activity on CPUs
- [ 1.028635] NET: Registered protocol family 10
- [ 1.028837] Segment Routing with IPv6
- [ 1.028848] mip6: Mobile IPv6
- [ 1.028850] NET: Registered protocol family 17
- [ 1.028852] mpls_gso: MPLS GSO support
- [ 1.029039] microcode: sig=0x10676, pf=0x10, revision=0x606
- [ 1.029098] microcode: Microcode Update Driver: v2.2.
- [ 1.029109] sched_clock: Marking stable (1029093893, 0)->(1183091464, -153997571)
- [ 1.029269] registered taskstats version 1
- [ 1.029283] zswap: loaded using pool lzo/zbud
- [ 1.029343] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
- [ 1.029656] PM: Hibernation image not present or could not be loaded.
- [ 1.031702] Freeing unused kernel memory: 1472K
- [ 1.031703] Write protecting the kernel read-only data: 12288k
- [ 1.032188] Freeing unused kernel memory: 1592K
- [ 1.034632] Freeing unused kernel memory: 1132K
- [ 1.036177] x86/mm: Checked W+X mappings: passed, no W+X pages found.
- [ 1.084860] Floppy drive(s): fd0 is 1.44M
- [ 1.089586] ACPI: bus type USB registered
- [ 1.089611] usbcore: registered new interface driver usbfs
- [ 1.089619] usbcore: registered new interface driver hub
- [ 1.089645] usbcore: registered new device driver usb
- [ 1.089793] sky2: driver version 1.30
- [ 1.089940] sky2 0000:03:00.0: Yukon-2 EC Ultra chip revision 3
- [ 1.090035] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 1.090201] ehci-pci: EHCI PCI platform driver
- [ 1.090260] sky2 0000:03:00.0 eth0: addr 00:1e:8c:7d:bc:f3
- [ 1.090298] ehci-pci 0000:00:1a.7: EHCI Host Controller
- [ 1.090305] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
- [ 1.090316] ehci-pci 0000:00:1a.7: debug port 1
- [ 1.090428] uhci_hcd: USB Universal Host Controller Interface driver
- [ 1.092182] SCSI subsystem initialized
- [ 1.093374] libata version 3.00 loaded.
- [ 1.094220] ehci-pci 0000:00:1a.7: cache line size of 32 is not supported
- [ 1.094354] scsi host0: pata_jmicron
- [ 1.094403] ehci-pci 0000:00:1a.7: irq 18, io mem 0xf9fffc00
- [ 1.094436] scsi host1: pata_jmicron
- [ 1.108027] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
- [ 1.108073] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 1.108075] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.108076] usb usb1: Product: EHCI Host Controller
- [ 1.108077] usb usb1: Manufacturer: Linux 4.13.0-1-amd64 ehci_hcd
- [ 1.108078] usb usb1: SerialNumber: 0000:00:1a.7
- [ 1.108187] hub 1-0:1.0: USB hub found
- [ 1.108194] hub 1-0:1.0: 6 ports detected
- [ 1.108410] ehci-pci 0000:00:1d.7: EHCI Host Controller
- [ 1.108416] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
- [ 1.108427] ehci-pci 0000:00:1d.7: debug port 1
- [ 1.112321] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
- [ 1.112336] ehci-pci 0000:00:1d.7: irq 23, io mem 0xf9fff800
- [ 1.112548] FDC 0 is a post-1991 82077
- [ 1.113541] sky2 0000:03:00.0 enp3s0: renamed from eth0
- [ 1.128016] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
- [ 1.128043] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
- [ 1.128045] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.128046] usb usb2: Product: EHCI Host Controller
- [ 1.128047] usb usb2: Manufacturer: Linux 4.13.0-1-amd64 ehci_hcd
- [ 1.128048] usb usb2: SerialNumber: 0000:00:1d.7
- [ 1.128134] hub 2-0:1.0: USB hub found
- [ 1.128139] hub 2-0:1.0: 6 ports detected
- [ 1.128387] uhci_hcd 0000:00:1a.0: UHCI Host Controller
- [ 1.128394] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
- [ 1.128401] uhci_hcd 0000:00:1a.0: detected 2 ports
- [ 1.128419] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000a800
- [ 1.128475] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
- [ 1.128476] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.128478] usb usb3: Product: UHCI Host Controller
- [ 1.128479] usb usb3: Manufacturer: Linux 4.13.0-1-amd64 uhci_hcd
- [ 1.128480] usb usb3: SerialNumber: 0000:00:1a.0
- [ 1.128621] hub 3-0:1.0: USB hub found
- [ 1.128627] hub 3-0:1.0: 2 ports detected
- [ 1.128802] uhci_hcd 0000:00:1a.1: UHCI Host Controller
- [ 1.128806] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
- [ 1.128811] uhci_hcd 0000:00:1a.1: detected 2 ports
- [ 1.128833] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000a880
- [ 1.128870] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
- [ 1.128871] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.128872] usb usb4: Product: UHCI Host Controller
- [ 1.128873] usb usb4: Manufacturer: Linux 4.13.0-1-amd64 uhci_hcd
- [ 1.128874] usb usb4: SerialNumber: 0000:00:1a.1
- [ 1.128960] hub 4-0:1.0: USB hub found
- [ 1.128965] hub 4-0:1.0: 2 ports detected
- [ 1.129045] ata_piix 0000:00:1f.2: version 2.13
- [ 1.129105] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
- [ 1.130005] scsi host2: ata_piix
- [ 1.130088] scsi host3: ata_piix
- [ 1.130194] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
- [ 1.130887] scsi host4: ata_piix
- [ 1.130957] scsi host5: ata_piix
- [ 1.131082] ACPI Warning: SystemIO range 0x0000000000000400-0x000000000000041F conflicts with OpRegion 0x0000000000000400-0x000000000000040F (\SMRG) (20170531/utaddress-247)
- [ 1.131088] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
- [ 1.131381] uhci_hcd 0000:00:1a.2: UHCI Host Controller
- [ 1.131386] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
- [ 1.131392] uhci_hcd 0000:00:1a.2: detected 2 ports
- [ 1.131407] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000ac00
- [ 1.131444] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
- [ 1.131446] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.131447] usb usb5: Product: UHCI Host Controller
- [ 1.131448] usb usb5: Manufacturer: Linux 4.13.0-1-amd64 uhci_hcd
- [ 1.131449] usb usb5: SerialNumber: 0000:00:1a.2
- [ 1.131531] hub 5-0:1.0: USB hub found
- [ 1.131536] hub 5-0:1.0: 2 ports detected
- [ 1.131669] uhci_hcd 0000:00:1d.0: UHCI Host Controller
- [ 1.131673] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
- [ 1.131677] uhci_hcd 0000:00:1d.0: detected 2 ports
- [ 1.131693] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000a080
- [ 1.131727] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
- [ 1.131728] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.131730] usb usb6: Product: UHCI Host Controller
- [ 1.131731] usb usb6: Manufacturer: Linux 4.13.0-1-amd64 uhci_hcd
- [ 1.131732] usb usb6: SerialNumber: 0000:00:1d.0
- [ 1.131811] hub 6-0:1.0: USB hub found
- [ 1.131816] hub 6-0:1.0: 2 ports detected
- [ 1.131950] uhci_hcd 0000:00:1d.1: UHCI Host Controller
- [ 1.131954] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
- [ 1.131959] uhci_hcd 0000:00:1d.1: detected 2 ports
- [ 1.131975] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000a400
- [ 1.132228] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
- [ 1.132229] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.132231] usb usb7: Product: UHCI Host Controller
- [ 1.132232] usb usb7: Manufacturer: Linux 4.13.0-1-amd64 uhci_hcd
- [ 1.132233] usb usb7: SerialNumber: 0000:00:1d.1
- [ 1.132413] hub 7-0:1.0: USB hub found
- [ 1.132418] hub 7-0:1.0: 2 ports detected
- [ 1.132550] uhci_hcd 0000:00:1d.2: UHCI Host Controller
- [ 1.132554] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
- [ 1.132559] uhci_hcd 0000:00:1d.2: detected 2 ports
- [ 1.132574] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000a480
- [ 1.132610] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
- [ 1.132611] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.132612] usb usb8: Product: UHCI Host Controller
- [ 1.132613] usb usb8: Manufacturer: Linux 4.13.0-1-amd64 uhci_hcd
- [ 1.132614] usb usb8: SerialNumber: 0000:00:1d.2
- [ 1.132816] hub 8-0:1.0: USB hub found
- [ 1.132821] hub 8-0:1.0: 2 ports detected
- [ 1.172036] firewire_ohci 0000:05:03.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
- [ 1.436008] usb 1-6: new high-speed USB device number 2 using ehci-pci
- [ 1.586321] usb 1-6: New USB device found, idVendor=058f, idProduct=6362
- [ 1.586323] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 1.586324] usb 1-6: Product: Mass Storage Device
- [ 1.586325] usb 1-6: Manufacturer: Generic
- [ 1.586326] usb 1-6: SerialNumber: 058F312D81B
- [ 1.587566] usb-storage 1-6:1.0: USB Mass Storage device detected
- [ 1.587653] scsi host6: usb-storage 1-6:1.0
- [ 1.587712] usbcore: registered new interface driver usb-storage
- [ 1.587983] usbcore: registered new interface driver uas
- [ 1.622396] ata5.00: supports DRM functions and may not be fully accessible
- [ 1.622399] ata5.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 0/32)
- [ 1.626022] ata5.00: supports DRM functions and may not be fully accessible
- [ 1.627165] ata5.00: configured for UDMA/133
- [ 1.652008] usb 6-1: new full-speed USB device number 2 using uhci_hcd
- [ 1.692014] tsc: Refined TSC clocksource calibration: 3005.554 MHz
- [ 1.692018] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2b52c43fc35, max_idle_ns: 440795331618 ns
- [ 1.692066] firewire_core 0000:05:03.0: created device fw0: GUID 0011d8000193e6be, S400
- [ 1.813029] usb 6-1: New USB device found, idVendor=0557, idProduct=8021
- [ 1.813030] usb 6-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 1.816054] hub 6-1:1.0: USB hub found
- [ 1.818027] hub 6-1:1.0: 4 ports detected
- [ 1.914623] ata4.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth 0/32)
- [ 1.919200] ata4.00: configured for UDMA/133
- [ 1.934530] ata3.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth 0/32)
- [ 1.939114] ata3.00: configured for UDMA/133
- [ 1.960116] ata3.01: configured for UDMA/100
- [ 2.073664] scsi 2:0:0:0: Direct-Access ATA ST4000DM005-2DP1 0001 PQ: 0 ANSI: 5
- [ 2.107142] scsi 2:0:1:0: CD-ROM HL-DT-ST DVDRAM GH20NS10 EL00 PQ: 0 ANSI: 5
- [ 2.116014] usb 6-1.1: new low-speed USB device number 3 using uhci_hcd
- [ 2.117417] scsi 3:0:0:0: Direct-Access ATA ST4000DM005-2DP1 0001 PQ: 0 ANSI: 5
- [ 2.156183] scsi 4:0:0:0: Direct-Access ATA Samsung SSD 850 2B6Q PQ: 0 ANSI: 5
- [ 2.189243] sd 2:0:0:0: [sda] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB)
- [ 2.189245] sd 2:0:0:0: [sda] 4096-byte physical blocks
- [ 2.189256] sd 2:0:0:0: [sda] Write Protect is off
- [ 2.189257] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 2.189274] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 2.189464] sd 3:0:0:0: [sdb] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB)
- [ 2.189465] sd 3:0:0:0: [sdb] 4096-byte physical blocks
- [ 2.189483] sd 4:0:0:0: [sdc] 488397168 512-byte logical blocks: (250 GB/233 GiB)
- [ 2.189492] sd 3:0:0:0: [sdb] Write Protect is off
- [ 2.189493] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
- [ 2.189503] sd 4:0:0:0: [sdc] Write Protect is off
- [ 2.189504] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
- [ 2.189528] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 2.189537] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 2.191788] sdc: sdc1 sdc2
- [ 2.192091] sd 4:0:0:0: [sdc] Attached SCSI disk
- [ 2.251007] sdb: sdb1
- [ 2.251228] sd 3:0:0:0: [sdb] Attached SCSI disk
- [ 2.279031] usb 6-1.1: New USB device found, idVendor=046a, idProduct=0023
- [ 2.279032] usb 6-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 2.284830] hidraw: raw HID events driver (C) Jiri Kosina
- [ 2.329623] sr 2:0:1:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
- [ 2.329626] cdrom: Uniform CD-ROM driver Revision: 3.20
- [ 2.329745] sr 2:0:1:0: Attached scsi CD-ROM sr0
- [ 2.346065] usbcore: registered new interface driver usbhid
- [ 2.346065] usbhid: USB HID core driver
- [ 2.346697] input: HID 046a:0023 as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.1/6-1.1:1.0/0003:046A:0023.0001/input/input1
- [ 2.404106] cherry 0003:046A:0023.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 046a:0023] on usb-0000:00:1d.0-1.1/input0
- [ 2.404359] input: HID 046a:0023 as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.1/6-1.1:1.1/0003:046A:0023.0002/input/input2
- [ 2.464044] cherry 0003:046A:0023.0002: input,hidraw1: USB HID v1.11 Device [HID 046a:0023] on usb-0000:00:1d.0-1.1/input1
- [ 2.588711] scsi 6:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
- [ 2.589208] scsi 6:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
- [ 2.589707] scsi 6:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
- [ 2.590204] scsi 6:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
- [ 2.605732] sda: sda1
- [ 2.605996] sd 2:0:0:0: [sda] Attached SCSI disk
- [ 2.620705] sd 6:0:0:0: [sdd] Attached SCSI removable disk
- [ 2.621325] sd 6:0:0:1: [sde] Attached SCSI removable disk
- [ 2.621951] sd 6:0:0:2: [sdf] Attached SCSI removable disk
- [ 2.622573] sd 6:0:0:3: [sdg] Attached SCSI removable disk
- [ 2.648024] usb 6-2: new low-speed USB device number 4 using uhci_hcd
- [ 2.716066] clocksource: Switched to clocksource tsc
- [ 3.041027] usb 6-2: New USB device found, idVendor=093a, idProduct=2510
- [ 3.041029] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 3.041030] usb 6-2: Product: USB Optical Mouse
- [ 3.041031] usb 6-2: Manufacturer: PixArt
- [ 3.057991] input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/0003:093A:2510.0003/input/input3
- [ 3.058056] hid-generic 0003:093A:2510.0003: input,hidraw2: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:1d.0-2/input0
- [ 3.330387] md/raid1:md0: active with 2 out of 2 mirrors
- [ 3.374553] md0: detected capacity change from 0 to 4000650887168
- [ 3.776013] raid6: sse2x1 gen() 5288 MB/s
- [ 3.844009] raid6: sse2x1 xor() 5072 MB/s
- [ 3.912012] raid6: sse2x2 gen() 5785 MB/s
- [ 3.980005] raid6: sse2x2 xor() 6204 MB/s
- [ 4.048004] raid6: sse2x4 gen() 8806 MB/s
- [ 4.116004] raid6: sse2x4 xor() 7038 MB/s
- [ 4.116005] raid6: using algorithm sse2x4 gen() 8806 MB/s
- [ 4.116005] raid6: .... xor() 7038 MB/s, rmw enabled
- [ 4.116006] raid6: using ssse3x2 recovery algorithm
- [ 4.116147] xor: measuring software checksum speed
- [ 4.156003] prefetch64-sse: 12493.000 MB/sec
- [ 4.196003] generic_sse: 10976.000 MB/sec
- [ 4.196003] xor: using function: prefetch64-sse (12493.000 MB/sec)
- [ 4.196141] async_tx: api initialized (async)
- [ 4.217270] PM: Starting manual resume from disk
- [ 4.217274] PM: Hibernation image partition 8:34 present
- [ 4.217274] PM: Looking for hibernation image.
- [ 4.217471] PM: Image not found (code -22)
- [ 4.217472] PM: Hibernation image not present or could not be loaded.
- [ 4.381549] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
- [ 4.510928] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 4.520077] systemd[1]: systemd 235 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
- [ 4.520196] systemd[1]: Detected architecture x86-64.
- [ 4.520397] systemd[1]: Set hostname to <Home>.
- [ 4.600154] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
- [ 4.600279] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
- [ 4.600420] systemd[1]: Created slice User and Session Slice.
- [ 4.600536] systemd[1]: Created slice System Slice.
- [ 4.600597] systemd[1]: Listening on Journal Audit Socket.
- [ 4.600606] systemd[1]: Reached target Slices.
- [ 4.601185] systemd[1]: Mounting POSIX Message Queue File System...
- [ 4.621646] EXT4-fs (sdc1): re-mounted. Opts: errors=remount-ro
- [ 4.643552] lp: driver loaded but no devices found
- [ 4.645538] ppdev: user-space parallel port driver
- [ 4.730548] systemd-journald[267]: Received request to flush runtime journal from PID 1
- [ 4.733242] nvidia: loading out-of-tree module taints kernel.
- [ 4.733248] nvidia: module license 'NVIDIA' taints kernel.
- [ 4.733249] Disabling lock debugging due to kernel taint
- [ 4.749793] nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
- [ 4.750062] [drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:01:00.0 on minor 0
- [ 4.750067] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 340.104 Thu Sep 14 17:13:13 PDT 2017
- [ 4.823661] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
- [ 4.823674] ACPI: Power Button [PWRB]
- [ 4.823726] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
- [ 4.823741] ACPI: Power Button [PWRF]
- [ 4.831657] ATK0110 ATK0110:00: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
- [ 4.836744] EDAC MC0: Giving out device to module x38_edac controller x38: DEV 0000:00:00.0 (POLLED)
- [ 4.872644] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
- [ 4.876343] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004BA (\GPS0) (20170531/utaddress-247)
- [ 4.876349] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
- [ 4.876350] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004BA (\GPS0) (20170531/utaddress-247)
- [ 4.876353] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
- [ 4.876353] lpc_ich: Resource conflict(s) found affecting gpio_ich
- [ 4.887490] sd 2:0:0:0: Attached scsi generic sg0 type 0
- [ 4.888356] sr 2:0:1:0: Attached scsi generic sg1 type 5
- [ 4.889659] sd 3:0:0:0: Attached scsi generic sg2 type 0
- [ 4.889958] sd 4:0:0:0: Attached scsi generic sg3 type 0
- [ 4.890412] sd 6:0:0:0: Attached scsi generic sg4 type 0
- [ 4.890807] sd 6:0:0:1: Attached scsi generic sg5 type 0
- [ 4.891115] sd 6:0:0:2: Attached scsi generic sg6 type 0
- [ 4.892137] sd 6:0:0:3: Attached scsi generic sg7 type 0
- [ 4.900463] input: PC Speaker as /devices/platform/pcspkr/input/input6
- [ 4.922682] intel_powerclamp: No package C-state available
- [ 4.970607] iTCO_vendor_support: vendor-support=0
- [ 4.971165] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
- [ 4.971221] iTCO_wdt: Found a ICH9R TCO device (Version=2, TCOBASE=0x0860)
- [ 4.971499] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
- [ 5.037694] Adding 34482356k swap on /dev/sdc2. Priority:-1 extents:1 across:34482356k SSFS
- [ 5.264900] snd_hda_codec_analog hdaudioC0D0: autoconfig for AD1988B: line_outs=4 (0x12/0x16/0x24/0x25/0x0) type:line
- [ 5.264903] snd_hda_codec_analog hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
- [ 5.264905] snd_hda_codec_analog hdaudioC0D0: hp_outs=1 (0x11/0x0/0x0/0x0/0x0)
- [ 5.264907] snd_hda_codec_analog hdaudioC0D0: mono: mono_out=0x0
- [ 5.264908] snd_hda_codec_analog hdaudioC0D0: dig-out=0x1b/0x0
- [ 5.264910] snd_hda_codec_analog hdaudioC0D0: inputs:
- [ 5.264912] snd_hda_codec_analog hdaudioC0D0: Front Mic=0x14
- [ 5.264914] snd_hda_codec_analog hdaudioC0D0: Rear Mic=0x17
- [ 5.264916] snd_hda_codec_analog hdaudioC0D0: Line=0x15
- [ 5.264918] snd_hda_codec_analog hdaudioC0D0: Line=0x1a
- [ 5.264919] snd_hda_codec_analog hdaudioC0D0: CD=0x18
- [ 5.269457] random: crng init done
- [ 5.279853] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
- [ 5.280816] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
- [ 5.283627] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
- [ 5.283731] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
- [ 5.283813] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
- [ 5.283881] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
- [ 5.283953] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
- [ 5.284038] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
- [ 5.284108] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
- [ 6.256316] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null)
- [ 6.852514] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
- [ 6.855515] sky2 0000:03:00.0 enp3s0: enabling interface
- [ 6.855597] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
- [ 7.806129] NVRM: RmInitAdapter failed! (0x25:0xffffffff:1197)
- [ 7.806143] NVRM: rm_init_adapter failed for device bearing minor number 0
- [ 7.806170] NVRM: nvidia_frontend_open: minor 0, module->open() failed, error -5
- [ 8.266776] NVRM: RmInitAdapter failed! (0x25:0xffffffff:1197)
- [ 8.266790] NVRM: rm_init_adapter failed for device bearing minor number 0
- [ 8.266819] NVRM: nvidia_frontend_open: minor 0, module->open() failed, error -5
- [ 8.734817] NVRM: RmInitAdapter failed! (0x25:0xffffffff:1197)
- [ 8.734831] NVRM: rm_init_adapter failed for device bearing minor number 0
- [ 8.734860] NVRM: nvidia_frontend_open: minor 0, module->open() failed, error -5
- [ 9.198844] NVRM: RmInitAdapter failed! (0x25:0xffffffff:1197)
- [ 9.198859] NVRM: rm_init_adapter failed for device bearing minor number 0
- [ 9.198891] NVRM: nvidia_frontend_open: minor 0, module->open() failed, error -5
- [ 9.288252] sky2 0000:03:00.0 enp3s0: Link is up at 1000 Mbps, full duplex, flow control both
- [ 9.288275] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
- [ 9.406523] vboxdrv: Found 4 processor cores
- [ 9.406792] vboxdrv: fAsync=0 offMin=0x1cb offMax=0x265b
- [ 9.494677] NVRM: RmInitAdapter failed! (0x25:0xffffffff:1197)
- [ 9.494691] NVRM: rm_init_adapter failed for device bearing minor number 0
- [ 9.494720] NVRM: nvidia_frontend_open: minor 0, module->open() failed, error -5
- [ 9.507363] vboxdrv: TSC mode is Synchronous, tentative frequency 3005553773 Hz
- [ 9.507365] vboxdrv: Successfully loaded version 5.2.0_Debian (interface 0x00290000)
- [ 9.513267] VBoxNetFlt: Successfully started.
- [ 9.517188] VBoxNetAdp: Successfully started.
- [ 9.521850] VBoxPciLinuxInit
- [ 9.523516] vboxpci: IOMMU not found (not registered)
- [ 97.572665] usb 6-1: USB disconnect, device number 2
- [ 97.572668] usb 6-1.1: USB disconnect, device number 3
- [ 99.324416] usb 6-1: new full-speed USB device number 5 using uhci_hcd
- [ 99.486056] usb 6-1: New USB device found, idVendor=0557, idProduct=8021
- [ 99.486058] usb 6-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 99.489094] hub 6-1:1.0: USB hub found
- [ 99.491055] hub 6-1:1.0: 4 ports detected
- [ 99.497118] usb 6-2: USB disconnect, device number 4
- [ 99.788374] usb 6-1.1: new full-speed USB device number 6 using uhci_hcd
- [ 99.945058] usb 6-1.1: New USB device found, idVendor=046a, idProduct=0023
- [ 99.945061] usb 6-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 99.959428] input: HID 046a:0023 as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.1/6-1.1:1.0/0003:046A:0023.0004/input/input16
- [ 100.016529] cherry 0003:046A:0023.0004: input,hidraw0: USB HID v1.11 Keyboard [HID 046a:0023] on usb-0000:00:1d.0-1.1/input0
- [ 100.026499] input: HID 046a:0023 as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.1/6-1.1:1.1/0003:046A:0023.0005/input/input17
- [ 100.088719] cherry 0003:046A:0023.0005: input,hidraw1: USB HID v1.11 Device [HID 046a:0023] on usb-0000:00:1d.0-1.1/input1
- [ 100.102357] input: HID 046a:0023 as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.1/6-1.1:1.2/0003:046A:0023.0006/input/input18
- [ 100.102476] cherry 0003:046A:0023.0006: input,hidraw2: USB HID v1.10 Mouse [HID 046a:0023] on usb-0000:00:1d.0-1.1/input2
Quellcode
Hier kannst du den Code kopieren und ihn in deinen bevorzugten Editor einfügen. PASTEBIN_DOWNLOAD_SNIPPET_EXPLAIN