NoPaste

dmesg USB3

von chrimb
Beschreibung:
dmesg Aussagbe
Snippet erstellt:
30.11.2017 20:33:33
Snippet wird automatisch gelöscht:
Niemals

Dein Code:
  1. dmesg
  2. [    0.000000] microcode: microcode updated early to revision 0x29, date = 2013-06-12
  3. [    0.000000] random: get_random_bytes called from start_kernel+0x3d/0x456 with crng_init=0
  4. [    0.000000] Linux version 4.13.0-0.bpo.1-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18)) #1 SMP Debian 4.13.13-1~bpo9+1 (2017-11-22)
  5. [    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.13.0-0.bpo.1-amd64 root=UUID=db5207a5-d0ac-4218-8250-5c99c57a9944 ro quiet
  6. [    0.000000] Disabled fast string operations
  7. [    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
  8. [    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
  9. [    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
  10. [    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
  11. [    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard''normal', was 'performance'
  12. [    0.019667] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
  13. [    0.019671] mce: CPU supports 7 MCE banks
  14. [    0.019679] CPU0: Thermal monitoring enabled (TM1)
  15. [    0.019686] process: using mwait in idle threads
  16. [    0.019689] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
  17. [    0.019689] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
  18. [    0.019783] Freeing SMP alternatives memory: 28K
  19. [    0.021348] smpboot: Max logical packages: 4
  20. [    0.021359] DMAR: Host address width 36
  21. [    0.021361] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
  22. [    0.021366] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
  23. [    0.021366] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
  24. [    0.021369] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
  25. [    0.021370] DMAR: RMRR base: 0x000000bacd5000 end: 0x000000bacebfff
  26. [    0.021371] DMAR: RMRR base: 0x000000bb800000 end: 0x000000bf9fffff
  27. [    0.021374] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
  28. [    0.021374] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
  29. [    0.021375] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
  30. [    0.021823] DMAR-IR: Enabled IRQ remapping in x2apic mode
  31. [    0.021825] x2apic enabled
  32. [    0.021830] Switched APIC routing to cluster x2apic.
  33. [    0.022235] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
  34. [    0.061937] TSC deadline timer enabled
  35. [    0.061940] smpboot: CPU0: Intel(R) Core(TM) i5-2540M CPU @ 2.60GHz (family: 0x6, model: 0x2a, stepping: 0x7)
  36. [    0.062025] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
  37. [    0.062045] ... version:                3
  38. [    0.062046] ... bit width:              48
  39. [    0.062046] ... generic registers:      4
  40. [    0.062047] ... value mask:             0000ffffffffffff
  41. [    0.062047] ... max period:             00007fffffffffff
  42. [    0.062047] ... fixed-purpose events:   3
  43. [    0.062048] ... event mask:             000000070000000f
  44. [    0.062096] Hierarchical SRCU implementation.
  45. [    0.062643] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
  46. [    0.062661] smp: Bringing up secondary CPUs ...
  47. [    0.062753] x86: Booting SMP configuration:
  48. [    0.062753] .... node  #0, CPUs:      #1
  49. [    0.004000] Disabled fast string operations
  50. [    0.064000]  #2
  51. [    0.004000] Disabled fast string operations
  52. [    0.064101]  #3
  53. [    0.004000] Disabled fast string operations
  54. [    0.066701] smp: Brought up 1 node, 4 CPUs
  55. [    0.066701] smpboot: Total of 4 processors activated (20732.60 BogoMIPS)
  56. [    0.068377] devtmpfs: initialized
  57. [    0.068377] x86/mm: Memory block size: 128MB
  58. [    0.068983] PM: Registering ACPI NVS region [mem 0xbae9f000-0xbaf9efff] (1048576 bytes)
  59. [    0.068983] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  60. [    0.068983] futex hash table entries: 2048 (order: 5, 131072 bytes)
  61. [    0.068983] pinctrl core: initialized pinctrl subsystem
  62. [    0.068983] NET: Registered protocol family 16
  63. [    0.068983] cpuidle: using governor ladder
  64. [    0.068983] cpuidle: using governor menu
  65. [    0.068983] PCCT header not found.
  66. [    0.068983] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
  67. [    0.068983] ACPI: bus type PCI registered
  68. [    0.068983] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
  69. [    0.068983] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
  70. [    0.068983] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
  71. [    0.068983] PCI: Using configuration type 1 for base access
  72. [    0.068983] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
  73. [    0.068983] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
  74. [    0.068983] ACPI: Added _OSI(Module Device)
  75. [    0.068983] ACPI: Added _OSI(Processor Device)
  76. [    0.068983] ACPI: Added _OSI(3.0 _SCP Extensions)
  77. [    0.068983] ACPI: Added _OSI(Processor Aggregator Device)
  78. [    0.068983] ACPI: EC: EC started
  79. [    0.068983] ACPI: EC: interrupt blocked
  80. [    0.068983] ACPI: \: Used as first EC
  81. [    0.068983] ACPI: \: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
  82. [    0.068983] ACPI: \: Used as boot ECDT EC to handle transactions
  83. [    0.074579] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
  84. [    0.081923] ACPI: Dynamic OEM Table Load:
  85. [    0.081931] ACPI: SSDT 0xFFFF9E22EF537000 0008C0 (v01 PmRef  Cpu0Cst  00003001 INTL 20061109)
  86. [    0.082204] ACPI: Dynamic OEM Table Load:
  87. [    0.082209] ACPI: SSDT 0xFFFF9E22EF567C00 000303 (v01 PmRef  ApIst    00003000 INTL 20061109)
  88. [    0.082408] ACPI: Dynamic OEM Table Load:
  89. [    0.082413] ACPI: SSDT 0xFFFF9E22EF52A200 000119 (v01 PmRef  ApCst    00003000 INTL 20061109)
  90. [    0.083011] ACPI: Interpreter enabled
  91. [    0.083026] ACPI: (supports S0 S3 S4 S5)
  92. [    0.083027] ACPI: Using IOAPIC for interrupt routing
  93. [    0.083047] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
  94. [    0.083262] ACPI: Enabled 6 GPEs in block 00 to 3F
  95. [    0.087482] ACPI: Power Resource [PUBS] (on)
  96. [    0.089635] acpi PNP0C0A:01: ACPI dock station (docks/bays count: 1)
  97. [    0.090481] acpi LNXIOBAY:00: ACPI dock station (docks/bays count: 2)
  98. [    0.094975] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
  99. [    0.095053] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 9 10 11)
  100. [    0.095127] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
  101. [    0.095201] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
  102. [    0.095275] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11)
  103. [    0.095334] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
  104. [    0.095408] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 9 10 11)
  105. [    0.095482] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11)
  106. [    0.095561] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
  107. [    0.095565] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
  108. [    0.095723] acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability]
  109. [    0.095795] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
  110. [    0.095796] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
  111. [    0.095797] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER]
  112. [    0.095798] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
  113. [    0.095809] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
  114. [    0.095950] PCI host bridge to bus 0000:00
  115. [    0.095952] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
  116. [    0.095953] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
  117. [    0.095954] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
  118. [    0.095955] pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xfebfffff window]
  119. [    0.095956] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed4bfff window]
  120. [    0.095958] pci_bus 0000:00: root bus resource [bus 00-fe]
  121. [    0.095964] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
  122. [    0.096042] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
  123. [    0.096071] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
  124. [    0.096133] pci 0000:00:02.0: [8086:0126] type 00 class 0x030000
  125. [    0.096142] pci 0000:00:02.0: reg 0x10: [mem 0xf1400000-0xf17fffff 64bit]
  126. [    0.096147] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
  127. [    0.096150] pci 0000:00:02.0: reg 0x20: [io  0x6000-0x603f]
  128. [    0.096235] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
  129. [    0.096258] pci 0000:00:16.0: reg 0x10: [mem 0xf3925000-0xf392500f 64bit]
  130. [    0.096329] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
  131. [    0.096392] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
  132. [    0.096411] pci 0000:00:19.0: reg 0x10: [mem 0xf3900000-0xf391ffff]
  133. [    0.096419] pci 0000:00:19.0: reg 0x14: [mem 0xf392b000-0xf392bfff]
  134. [    0.096427] pci 0000:00:19.0: reg 0x18: [io  0x6080-0x609f]
  135. [    0.096484] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
  136. [    0.096544] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
  137. [    0.096565] pci 0000:00:1a.0: reg 0x10: [mem 0xf392a000-0xf392a3ff]
  138. [    0.096646] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
  139. [    0.096710] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
  140. [    0.096731] pci 0000:00:1b.0: reg 0x10: [mem 0xf3920000-0xf3923fff 64bit]
  141. [    0.096801] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
  142. [    0.096870] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
  143. [    0.096995] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
  144. [    0.097073] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
  145. [    0.097205] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
  146. [    0.097282] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
  147. [    0.097419] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
  148. [    0.097497] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
  149. [    0.097631] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
  150. [    0.097708] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
  151. [    0.097729] pci 0000:00:1d.0: reg 0x10: [mem 0xf3929000-0xf39293ff]
  152. [    0.097809] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
  153. [    0.097870] pci 0000:00:1f.0: [8086:1c4f] type 00 class 0x060100
  154. [    0.098027] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
  155. [    0.098044] pci 0000:00:1f.2: reg 0x10: [io  0x60a8-0x60af]
  156. [    0.098051] pci 0000:00:1f.2: reg 0x14: [io  0x60bc-0x60bf]
  157. [    0.098058] pci 0000:00:1f.2: reg 0x18: [io  0x60a0-0x60a7]
  158. [    0.098065] pci 0000:00:1f.2: reg 0x1c: [io  0x60b8-0x60bb]
  159. [    0.098072] pci 0000:00:1f.2: reg 0x20: [io  0x6060-0x607f]
  160. [    0.098079] pci 0000:00:1f.2: reg 0x24: [mem 0xf3928000-0xf39287ff]
  161. [    0.098118] pci 0000:00:1f.2: PME# supported from D3hot
  162. [    0.098172] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
  163. [    0.098190] pci 0000:00:1f.3: reg 0x10: [mem 0xf3924000-0xf39240ff 64bit]
  164. [    0.098210] pci 0000:00:1f.3: reg 0x20: [io  0xefa0-0xefbf]
  165. [    0.098320] pci 0000:01:00.0: [10de:1057] type 00 class 0x030000
  166. [    0.098339] pci 0000:01:00.0: reg 0x10: [mem 0xf0000000-0xf0ffffff]
  167. [    0.098351] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
  168. [    0.098362] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
  169. [    0.098369] pci 0000:01:00.0: reg 0x24: [io  0x5000-0x507f]
  170. [    0.098376] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
  171. [    0.098535] pci 0000:00:01.0: PCI bridge to [bus 01]
  172. [    0.098537] pci 0000:00:01.0:   bridge window [io  0x5000-0x5fff]
  173. [    0.098538] pci 0000:00:01.0:   bridge window [mem 0xf0000000-0xf10fffff]
  174. [    0.098541] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
  175. [    0.098600] pci 0000:00:1c.0: PCI bridge to [bus 02]
  176. [    0.098814] pci 0000:03:00.0: [8086:0084] type 00 class 0x028000
  177. [    0.099032] pci 0000:03:00.0: reg 0x10: [mem 0xf3800000-0xf3801fff 64bit]
  178. [    0.099766] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
  179. [    0.112181] pci 0000:00:1c.1: PCI bridge to [bus 03]
  180. [    0.112190] pci 0000:00:1c.1:   bridge window [mem 0xf3800000-0xf38fffff]
  181. [    0.112281] acpiphp: Slot [1] registered
  182. [    0.112287] pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
  183. [    0.112292] pci 0000:00:1c.3:   bridge window [io  0x4000-0x4fff]
  184. [    0.112296] pci 0000:00:1c.3:   bridge window [mem 0xf3000000-0xf37fffff]
  185. [    0.112304] pci 0000:00:1c.3:   bridge window [mem 0xf1800000-0xf1ffffff 64bit pref]
  186. [    0.112434] pci 0000:0d:00.0: [1180:e822] type 00 class 0x088001
  187. [    0.112461] pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
  188. [    0.112496] pci 0000:0d:00.0: reg 0x10: [mem 0xf2801000-0xf28010ff]
  189. [    0.112704] pci 0000:0d:00.0: supports D1 D2
  190. [    0.112704] pci 0000:0d:00.0: PME# supported from D0 D1 D2 D3hot D3cold
  191. [    0.112848] pci 0000:0d:00.3: [1180:e832] type 00 class 0x0c0010
  192. [    0.112889] pci 0000:0d:00.3: reg 0x10: [mem 0xf2800000-0xf28007ff]
  193. [    0.113006] pci 0000:0d:00.3: Enabling fixed DMA alias to 00.0
  194. [    0.113093] pci 0000:0d:00.3: supports D1 D2
  195. [    0.113094] pci 0000:0d:00.3: PME# supported from D0 D1 D2 D3hot D3cold
  196. [    0.124091] pci 0000:00:1c.4: PCI bridge to [bus 0d]
  197. [    0.124099] pci 0000:00:1c.4:   bridge window [io  0x3000-0x3fff]
  198. [    0.124107] pci 0000:00:1c.4:   bridge window [mem 0xf2800000-0xf2ffffff]
  199. [    0.124128] pci 0000:00:1c.4:   bridge window [mem 0xf2000000-0xf27fffff 64bit pref]
  200. [    0.125768] ACPI: EC: EC stopped
  201. [    0.125769] ACPI: EC: EC started
  202. [    0.125769] ACPI: EC: interrupt blocked
  203. [    0.125926] ACPI: EC: interrupt unblocked
  204. [    0.125931] ACPI: EC: event unblocked
  205. [    0.125937] ACPI: \_SB_.PCI0.LPC_.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
  206. [    0.125939] ACPI: \_SB_.PCI0.LPC_.EC__: Used as boot ECDT EC to handle transactions and events
  207. [    0.125960] ACPI: \_SB_.PCI0.LPC_.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
  208. [    0.125961] ACPI: \_SB_.PCI0.LPC_.EC__: Used as boot DSDT EC to handle transactions and events
  209. [    0.126014] pci 0000:00:02.0: vgaarb: setting as boot VGA device
  210. [    0.126014] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
  211. [    0.126014] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
  212. [    0.126014] pci 0000:01:00.0: vgaarb: bridge control possible
  213. [    0.126014] pci 0000:00:02.0: vgaarb: no bridge control possible
  214. [    0.126014] vgaarb: loaded
  215. [    0.126014] EDAC MC: Ver: 3.0.0
  216. [    0.126014] PCI: Using ACPI for IRQ routing
  217. [    0.126014] PCI: pci_cache_line_size set to 64 bytes
  218. [    0.128099] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
  219. [    0.128100] e820: reserve RAM buffer [mem 0xba99f000-0xbbffffff]
  220. [    0.128101] e820: reserve RAM buffer [mem 0xbb000000-0xbbffffff]
  221. [    0.128102] e820: reserve RAM buffer [mem 0x33e600000-0x33fffffff]
  222. [    0.128196] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
  223. [    0.128196] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
  224. [    0.130060] clocksource: Switched to clocksource hpet
  225. [    0.136144] VFS: Disk quotas dquot_6.6.0
  226. [    0.136168] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  227. [    0.136258] AppArmor: AppArmor Filesystem Enabled
  228. [    0.136293] pnp: PnP ACPI init
  229. [    0.136698] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
  230. [    0.136699] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
  231. [    0.136700] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
  232. [    0.136702] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved
  233. [    0.136703] system 00:00: [mem 0x000cc000-0x000cffff] has been reserved
  234. [    0.136704] system 00:00: [mem 0x000d0000-0x000d3fff] has been reserved
  235. [    0.136705] system 00:00: [mem 0x000d4000-0x000d7fff] has been reserved
  236. [    0.136706] system 00:00: [mem 0x000d8000-0x000dbfff] has been reserved
  237. [    0.136707] system 00:00: [mem 0x000dc000-0x000dffff] has been reserved
  238. [    0.136709] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
  239. [    0.136710] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
  240. [    0.136711] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
  241. [    0.136712] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
  242. [    0.136713] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
  243. [    0.136715] system 00:00: [mem 0x00100000-0xbf9fffff] could not be reserved
  244. [    0.136716] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
  245. [    0.136717] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved
  246. [    0.136720] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
  247. [    0.136821] system 00:01: [io  0x0400-0x047f] has been reserved
  248. [    0.136823] system 00:01: [io  0x0500-0x057f] has been reserved
  249. [    0.136824] system 00:01: [io  0x0800-0x080f] has been reserved
  250. [    0.136825] system 00:01: [io  0x15e0-0x15ef] has been reserved
  251. [    0.136826] system 00:01: [io  0x1600-0x167f] has been reserved
  252. [    0.136828] system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
  253. [    0.136829] system 00:01: [mem 0x00000000-0x00000fff] could not be reserved
  254. [    0.136831] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
  255. [    0.136832] system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved
  256. [    0.136834] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
  257. [    0.136835] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
  258. [    0.136836] system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved
  259. [    0.136838] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
  260. [    0.136884] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
  261. [    0.136902] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
  262. [    0.136921] pnp 00:04: Plug and Play ACPI device, IDs LEN0015 PNP0f13 (active)
  263. [    0.136961] pnp 00:05: Plug and Play ACPI device, IDs SMO1200 PNP0c31 (active)
  264. [    0.137358] pnp: PnP ACPI: found 6 devices
  265. [    0.143503] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
  266. [    0.143507] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
  267. [    0.143561] pci 0000:01:00.0: BAR 6: assigned [mem 0xf1000000-0xf107ffff pref]
  268. [    0.143563] pci 0000:00:01.0: PCI bridge to [bus 01]
  269. [    0.143564] pci 0000:00:01.0:   bridge window [io  0x5000-0x5fff]
  270. [    0.143566] pci 0000:00:01.0:   bridge window [mem 0xf0000000-0xf10fffff]
  271. [    0.143568] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
  272. [    0.143571] pci 0000:00:1c.0: PCI bridge to [bus 02]
  273. [    0.143588] pci 0000:00:1c.1: PCI bridge to [bus 03]
  274. [    0.143594] pci 0000:00:1c.1:   bridge window [mem 0xf3800000-0xf38fffff]
  275. [    0.143605] pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
  276. [    0.143608] pci 0000:00:1c.3:   bridge window [io  0x4000-0x4fff]
  277. [    0.143614] pci 0000:00:1c.3:   bridge window [mem 0xf3000000-0xf37fffff]
  278. [    0.143618] pci 0000:00:1c.3:   bridge window [mem 0xf1800000-0xf1ffffff 64bit pref]
  279. [    0.143626] pci 0000:00:1c.4: PCI bridge to [bus 0d]
  280. [    0.143629] pci 0000:00:1c.4:   bridge window [io  0x3000-0x3fff]
  281. [    0.143635] pci 0000:00:1c.4:   bridge window [mem 0xf2800000-0xf2ffffff]
  282. [    0.143639] pci 0000:00:1c.4:   bridge window [mem 0xf2000000-0xf27fffff 64bit pref]
  283. [    0.143648] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
  284. [    0.143649] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
  285. [    0.143650] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
  286. [    0.143651] pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xfebfffff window]
  287. [    0.143652] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed4bfff window]
  288. [    0.143653] pci_bus 0000:01: resource 0 [io  0x5000-0x5fff]
  289. [    0.143654] pci_bus 0000:01: resource 1 [mem 0xf0000000-0xf10fffff]
  290. [    0.143655] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
  291. [    0.143656] pci_bus 0000:03: resource 1 [mem 0xf3800000-0xf38fffff]
  292. [    0.143657] pci_bus 0000:05: resource 0 [io  0x4000-0x4fff]
  293. [    0.143658] pci_bus 0000:05: resource 1 [mem 0xf3000000-0xf37fffff]
  294. [    0.143659] pci_bus 0000:05: resource 2 [mem 0xf1800000-0xf1ffffff 64bit pref]
  295. [    0.143660] pci_bus 0000:0d: resource 0 [io  0x3000-0x3fff]
  296. [    0.143661] pci_bus 0000:0d: resource 1 [mem 0xf2800000-0xf2ffffff]
  297. [    0.143662] pci_bus 0000:0d: resource 2 [mem 0xf2000000-0xf27fffff 64bit pref]
  298. [    0.143740] NET: Registered protocol family 2
  299. [    0.143909] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  300. [    0.144127] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
  301. [    0.144252] TCP: Hash tables configured (established 131072 bind 65536)
  302. [    0.144301] UDP hash table entries: 8192 (order: 6, 262144 bytes)
  303. [    0.144348] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
  304. [    0.144437] NET: Registered protocol family 1
  305. [    0.144452] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
  306. [    0.144833] PCI: CLS 64 bytes, default 64
  307. [    0.144875] Unpacking initramfs...
  308. [    0.466289] Freeing initrd memory: 19248K
  309. [    0.466352] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
  310. [    0.466354] software IO TLB [mem 0xb699f000-0xba99f000] (64MB) mapped at [ffff9e207699f000-ffff9e207a99efff]
  311. [    0.466716] audit: initializing netlink subsys (disabled)
  312. [    0.466777] audit: type=2000 audit(1512065872.466:1): state=initialized audit_enabled=0 res=1
  313. [    0.467073] workingset: timestamp_bits=40 max_order=22 bucket_order=0
  314. [    0.467111] zbud: loaded
  315. [    0.825994] Key type asymmetric registered
  316. [    0.825995] Asymmetric key parser 'x509' registered
  317. [    0.826012] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
  318. [    0.826046] io scheduler noop registered
  319. [    0.826047] io scheduler deadline registered
  320. [    0.826055] io scheduler cfq registered (default)
  321. [    0.826056] io scheduler mq-deadline registered
  322. [    0.826734] intel_idle: MWAIT substates: 0x21120
  323. [    0.826735] intel_idle: v0.4.1 model 0x2A
  324. [    0.826862] intel_idle: lapic_timer_reliable_states 0xffffffff
  325. [    0.827071] GHES: HEST is not enabled!
  326. [    0.827122] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  327. [    0.827443] Linux agpgart interface v0.103
  328. [    0.840198] tpm_tis 00:05: 1.2 TPM (device-id 0x0, rev-id 78)
  329. [    0.904161] tpm tpm0: A TPM error (6) occurred attempting to read a pcr value
  330. [    0.904217] tpm tpm0: TPM is disabled/deactivated (0x6)
  331. [    0.904933] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
  332. [    0.904933] AMD IOMMUv2 functionality not available on this system
  333. [    0.905507] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
  334. [    0.911646] serio: i8042 KBD port at 0x60,0x64 irq 1
  335. [    0.911651] serio: i8042 AUX port at 0x60,0x64 irq 12
  336. [    0.911858] mousedev: PS/2 mouse device common for all mice
  337. [    0.911905] rtc_cmos 00:02: RTC can wake from S4
  338. [    0.912049] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
  339. [    0.912079] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
  340. [    0.912087] intel_pstate: Intel P-state driver initializing
  341. [    0.912712] ledtrig-cpu: registered to indicate activity on CPUs
  342. [    0.913858] NET: Registered protocol family 10
  343. [    0.914419] Segment Routing with IPv6
  344. [    0.914454] mip6: Mobile IPv6
  345. [    0.914458] NET: Registered protocol family 17
  346. [    0.914463] mpls_gso: MPLS GSO support
  347. [    0.915074] microcode: sig=0x206a7, pf=0x10, revision=0x29
  348. [    0.915287] microcode: Microcode Update Driver: v2.2.
  349. [    0.915323] sched_clock: Marking stable (915260447, 0)->(915513263, -252816)
  350. [    0.915697] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
  351. [    0.915980] registered taskstats version 1
  352. [    0.916052] zswap: loaded using pool lzo/zbud
  353. [    0.916246] AppArmor: AppArmor sha1 policy hashing enabled
  354. [    0.932062] tpm tpm0: A TPM error (6) occurred attempting to read a pcr value
  355. [    0.932139] ima: No TPM chip found, activating TPM-bypass! (rc=6)
  356. [    0.933053] rtc_cmos 00:02: setting system clock to 2017-11-30 18:17:52 UTC (1512065872)
  357. [    0.933186] PM: Hibernation image not present or could not be loaded.
  358. [    0.938710] Freeing unused kernel memory: 1472K
  359. [    0.938713] Write protecting the kernel read-only data: 12288k
  360. [    0.939630] Freeing unused kernel memory: 1588K
  361. [    0.944455] Freeing unused kernel memory: 1128K
  362. [    0.947444] x86/mm: Checked W+X mappings: passed, no W+X pages found.
  363. [    1.044332] pps_core: LinuxPPS API ver. 1 registered
  364. [    1.044333] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  365. [    1.044528] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
  366. [    1.044529] PTP clock support registered
  367. [    1.044885] thermal LNXTHERM:00: registered as thermal_zone0
  368. [    1.044886] ACPI: Thermal Zone [THM0] (49 C)
  369. [    1.045289] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
  370. [    1.045289] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
  371. [    1.045416] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
  372. [    1.047471] ACPI: bus type USB registered
  373. [    1.047498] usbcore: registered new interface driver usbfs
  374. [    1.047508] usbcore: registered new interface driver hub
  375. [    1.047537] usbcore: registered new device driver usb
  376. [    1.047986] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  377. [    1.048205] ehci-pci: EHCI PCI platform driver
  378. [    1.048485] sdhci: Secure Digital Host Controller Interface driver
  379. [    1.048486] sdhci: Copyright(c) Pierre Ossman
  380. [    1.048722] sdhci-pci 0000:0d:00.0: SDHCI controller found [1180:e822] (rev 8)
  381. [    1.049314] mmc0: SDHCI controller on PCI [0000:0d:00.0] using DMA
  382. [    1.050959] SCSI subsystem initialized
  383. [    1.051914] libata version 3.00 loaded.
  384. [    1.058834] AVX version of gcm_enc/dec engaged.
  385. [    1.058835] AES CTR mode by8 optimization enabled
  386. [    1.120183] firewire_ohci 0000:0d:00.3: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x11
  387. [    1.147627] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
  388. [    1.251094] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) f0:de:f1:c4:93:a0
  389. [    1.251096] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
  390. [    1.251151] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
  391. [    1.251332] ehci-pci 0000:00:1a.0: EHCI Host Controller
  392. [    1.251356] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
  393. [    1.251394] ehci-pci 0000:00:1a.0: debug port 2
  394. [    1.252298] e1000e 0000:00:19.0 enp0s25: renamed from eth0
  395. [    1.255303] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
  396. [    1.255314] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf392a000
  397. [    1.268123] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
  398. [    1.268233] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  399. [    1.268236] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  400. [    1.268239] usb usb1: Product: EHCI Host Controller
  401. [    1.268241] usb usb1: Manufacturer: Linux 4.13.0-0.bpo.1-amd64 ehci_hcd
  402. [    1.268243] usb usb1: SerialNumber: 0000:00:1a.0
  403. [    1.268574] hub 1-0:1.0: USB hub found
  404. [    1.268593] hub 1-0:1.0: 3 ports detected
  405. [    1.268976] ehci-pci 0000:00:1d.0: EHCI Host Controller
  406. [    1.268987] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
  407. [    1.269010] ehci-pci 0000:00:1d.0: debug port 2
  408. [    1.272940] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
  409. [    1.272972] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf3929000
  410. [    1.288122] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
  411. [    1.288200] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
  412. [    1.288202] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  413. [    1.288203] usb usb2: Product: EHCI Host Controller
  414. [    1.288205] usb usb2: Manufacturer: Linux 4.13.0-0.bpo.1-amd64 ehci_hcd
  415. [    1.288206] usb usb2: SerialNumber: 0000:00:1d.0
  416. [    1.288421] hub 2-0:1.0: USB hub found
  417. [    1.288428] hub 2-0:1.0: 3 ports detected
  418. [    1.288813] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
  419. [    1.290088] ahci 0000:00:1f.2: version 3.0
  420. [    1.290355] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
  421. [    1.300493] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1f impl SATA mode
  422. [    1.300498] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst
  423. [    1.350568] scsi host0: ahci
  424. [    1.351041] scsi host1: ahci
  425. [    1.351403] scsi host2: ahci
  426. [    1.351726] scsi host3: ahci
  427. [    1.351983] scsi host4: ahci
  428. [    1.352315] scsi host5: ahci
  429. [    1.352435] ata1: SATA max UDMA/133 abar m2048@0xf3928000 port 0xf3928100 irq 27
  430. [    1.352439] ata2: SATA max UDMA/133 abar m2048@0xf3928000 port 0xf3928180 irq 27
  431. [    1.352443] ata3: SATA max UDMA/133 abar m2048@0xf3928000 port 0xf3928200 irq 27
  432. [    1.352447] ata4: SATA max UDMA/133 abar m2048@0xf3928000 port 0xf3928280 irq 27
  433. [    1.352450] ata5: SATA max UDMA/133 abar m2048@0xf3928000 port 0xf3928300 irq 27
  434. [    1.352452] ata6: DUMMY
  435. [    1.468038] tsc: Refined TSC clocksource calibration: 2591.581 MHz
  436. [    1.468057] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x255b2ad93f7, max_idle_ns: 440795226938 ns
  437. [    1.596087] usb 1-1: new high-speed USB device number 2 using ehci-pci
  438. [    1.616100] usb 2-1: new high-speed USB device number 2 using ehci-pci
  439. [    1.628452] firewire_core 0000:0d:00.3: created device fw0: GUID f0def1ffc493a0ff, S400
  440. [    1.667710] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  441. [    1.669674] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
  442. [    1.669681] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
  443. [    1.669685] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
  444. [    1.671554] ata1.00: ATA-8: WDC WD3200BEVT-08A23T1, 02.01A02, max UDMA/133
  445. [    1.671559] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
  446. [    1.673616] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
  447. [    1.673622] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
  448. [    1.673627] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
  449. [    1.675515] ata1.00: configured for UDMA/133
  450. [    1.676062] scsi 0:0:0:0: Direct-Access     ATA      WDC WD3200BEVT-0 1A02 PQ: 0 ANSI: 5
  451. [    1.744907] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
  452. [    1.744912] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  453. [    1.745600] hub 1-1:1.0: USB hub found
  454. [    1.747322] hub 1-1:1.0: 6 ports detected
  455. [    1.764918] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
  456. [    1.764924] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  457. [    1.765520] hub 2-1:1.0: USB hub found
  458. [    1.765665] hub 2-1:1.0: 8 ports detected
  459. [    2.018893] psmouse serio1: synaptics: queried max coordinates: x [..5888], y [..4820]
  460. [    2.023502] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  461. [    2.026089] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
  462. [    2.026335] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
  463. [    2.026342] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
  464. [    2.027910] ata2.00: ATAPI: HL-DT-STDVDRAM GT33N, LT30, max UDMA/66
  465. [    2.030709] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
  466. [    2.030961] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
  467. [    2.030967] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
  468. [    2.032504] ata2.00: configured for UDMA/66
  469. [    2.034577] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GT33N     LT30 PQ: 0 ANSI: 5
  470. [    2.036086] usb 1-1.2: new full-speed USB device number 3 using ehci-pci
  471. [    2.052100] usb 2-1.5: new full-speed USB device number 3 using ehci-pci
  472. [    2.126895] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd047b1/0xb40000/0xa0000/0x0, board id: 0, fw id: 578367
  473. [    2.126909] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
  474. [    2.150552] usb 1-1.2: New USB device found, idVendor=248a, idProduct=8366
  475. [    2.150557] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  476. [    2.150561] usb 1-1.2: Product: Wireless Receiver
  477. [    2.150563] usb 1-1.2: Manufacturer: Telink
  478. [    2.155848] hidraw: raw HID events driver (C) Jiri Kosina
  479. [    2.161852] usbcore: registered new interface driver usbhid
  480. [    2.161854] usbhid: USB HID core driver
  481. [    2.164094] input: Telink Wireless Receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:248A:8366.0001/input/input3
  482. [    2.166786] usb 2-1.5: New USB device found, idVendor=17ef, idProduct=1003
  483. [    2.166789] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  484. [    2.166791] usb 2-1.5: Product: Integrated Smart Card Reader
  485. [    2.166793] usb 2-1.5: Manufacturer: Lenovo
  486. [    2.196643] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2
  487. [    2.224507] hid-generic 0003:248A:8366.0001: input,hidraw0: USB HID v1.11 Mouse [Telink Wireless Receiver] on usb-0000:00:1a.0-1.2/input0
  488. [    2.228072] usb 1-1.3: new full-speed USB device number 4 using ehci-pci
  489. [    2.338272] usb 1-1.3: New USB device found, idVendor=147e, idProduct=2016
  490. [    2.338278] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  491. [    2.338281] usb 1-1.3: Product: Biometric Coprocessor
  492. [    2.338284] usb 1-1.3: Manufacturer: UPEK
  493. [    2.359804] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  494. [    2.360732] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
  495. [    2.360738] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
  496. [    2.360743] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
  497. [    2.361063] ata3.00: supports DRM functions and may not be fully accessible
  498. [    2.362491] ata3.00: ATA-10: Crucial_CT250MX200SSD3, MU03, max UDMA/133
  499. [    2.362496] ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
  500. [    2.367475] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
  501. [    2.367482] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
  502. [    2.367486] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
  503. [    2.367824] ata3.00: supports DRM functions and may not be fully accessible
  504. [    2.373212] ata3.00: configured for UDMA/133
  505. [    2.373684] scsi 2:0:0:0: Direct-Access     ATA      Crucial_CT250MX2 MU03 PQ: 0 ANSI: 5
  506. [    2.416107] usb 1-1.4: new full-speed USB device number 5 using ehci-pci
  507. [    2.492408] clocksource: Switched to clocksource tsc
  508. [    2.530133] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=217f
  509. [    2.530139] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  510. [    2.530143] usb 1-1.4: Product: Broadcom Bluetooth Device
  511. [    2.530145] usb 1-1.4: Manufacturer: Broadcom Corp
  512. [    2.530148] usb 1-1.4: SerialNumber: 402CF48EEEBE
  513. [    2.608111] usb 1-1.6: new high-speed USB device number 6 using ehci-pci
  514. [    2.723396] usb 1-1.6: New USB device found, idVendor=04f2, idProduct=b217
  515. [    2.723402] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  516. [    2.723406] usb 1-1.6: Product: Integrated Camera
  517. [    2.723409] usb 1-1.6: Manufacturer: Chicony Electronics Co., Ltd.
  518. [    2.731482] ata4: SATA link down (SStatus 0 SControl 300)
  519. [    3.047805] ata5: SATA link down (SStatus 0 SControl 300)
  520. [    3.054665] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
  521. [    3.054702] sd 0:0:0:0: [sda] Write Protect is off
  522. [    3.054705] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  523. [    3.054742] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  524. [    3.054955] ata3.00: Enabling discard_zeroes_data
  525. [    3.055070] sd 2:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/233 GiB)
  526. [    3.055073] sd 2:0:0:0: [sdb] 4096-byte physical blocks
  527. [    3.055096] sd 2:0:0:0: [sdb] Write Protect is off
  528. [    3.055099] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
  529. [    3.055135] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  530. [    3.055385] ata3.00: Enabling discard_zeroes_data
  531. [    3.056370]  sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 >
  532. [    3.057046] ata3.00: Enabling discard_zeroes_data
  533. [    3.057640] sd 2:0:0:0: [sdb] Attached SCSI disk
  534. [    3.066425] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
  535. [    3.066430] cdrom: Uniform CD-ROM driver Revision: 3.20
  536. [    3.066689] sr 1:0:0:0: Attached scsi CD-ROM sr0
  537. [    3.107775] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
  538. [    3.142218]  sda: sda1
  539. [    3.143275] sd 0:0:0:0: [sda] Attached SCSI disk
  540. [    3.430867] PM: Starting manual resume from disk
  541. [    3.430871] PM: Hibernation image partition 8:22 present
  542. [    3.430871] PM: Looking for hibernation image.
  543. [    3.431039] PM: Image not found (code -22)
  544. [    3.431039] PM: Hibernation image not present or could not be loaded.
  545. [    3.443709] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input4
  546. [    3.547234] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
  547. [    3.627369] systemd[1]: RTC configured in localtime, applying delta of 60 minutes to system time.
  548. [    3.640122] ip_tables: (C) 2000-2006 Netfilter Core Team
  549. [    3.644905] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
  550. [    3.645006] systemd[1]: Detected architecture x86-64.
  551. [    3.645175] systemd[1]: Set hostname to <HalLap2>.
  552. [    3.698761] systemd[1]: Created slice User and Session Slice.
  553. [    3.698819] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
  554. [    3.698921] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
  555. [    3.698933] systemd[1]: Reached target User and Group Name Lookups.
  556. [    3.698964] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  557. [    3.699002] systemd[1]: Listening on Journal Socket.
  558. [    3.699026] systemd[1]: Listening on fsck to fsckd communication Socket.
  559. [    3.710261] EXT4-fs (sdb5): re-mounted. Opts: errors=remount-ro
  560. [    3.717893] lp: driver loaded but no devices found
  561. [    3.720286] ppdev: user-space parallel port driver
  562. [    3.764182] systemd-journald[262]: Received request to flush runtime journal from PID 1
  563. [    3.813033] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input5
  564. [    3.813808] ACPI: Lid Switch [LID]
  565. [    3.813861] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input6
  566. [    3.813872] ACPI: Sleep Button [SLPB]
  567. [    3.813932] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
  568. [    3.813941] ACPI: Power Button [PWRF]
  569. [    3.820117] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
  570. [    3.821754] ACPI: Battery Slot [BAT0] (battery absent)
  571. [    3.823476] ACPI: AC Adapter [AC] (on-line)
  572. [    3.832177] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
  573. [    3.885802] sd 0:0:0:0: Attached scsi generic sg0 type 0
  574. [    3.885835] sr 1:0:0:0: Attached scsi generic sg1 type 5
  575. [    3.885866] sd 2:0:0:0: Attached scsi generic sg2 type 0
  576. [    3.886727] input: PC Speaker as /devices/platform/pcspkr/input/input8
  577. [    3.890903] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\_SB.PCI0.LPC.PMIO) (20170531/utaddress-247)
  578. [    3.890909] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
  579. [    3.890912] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPC.LPIO) (20170531/utaddress-247)
  580. [    3.890915] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
  581. [    3.890916] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPC.LPIO) (20170531/utaddress-247)
  582. [    3.890919] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
  583. [    3.890920] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPC.LPIO) (20170531/utaddress-247)
  584. [    3.890923] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
  585. [    3.890924] lpc_ich: Resource conflict(s) found affecting gpio_ich
  586. [    3.891779] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
  587. [    3.891781] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
  588. [    3.891781] RAPL PMU: hw unit of domain package 2^-16 Joules
  589. [    3.891782] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
  590. [    3.892199] Non-volatile memory driver v1.3
  591. [    3.892325] [drm] Memory usable by graphics device = 2048M
  592. [    3.892327] [drm] Replacing VGA console driver
  593. [    3.893550] Console: switching to colour dummy device 80x25
  594. [    3.895955] thinkpad_acpi: ThinkPad ACPI Extras v0.25
  595. [    3.895957] thinkpad_acpi: http://ibm-acpi.sf.net/
  596. [    3.895957] thinkpad_acpi: ThinkPad BIOS 8AET55WW (1.35 ), EC unknown
  597. [    3.895958] thinkpad_acpi: Lenovo ThinkPad T520, model 4243RZ6
  598. [    3.896763] thinkpad_hwmon thinkpad_hwmon: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
  599. [    3.899673] Intel(R) Wireless WiFi driver for Linux
  600. [    3.899675] Copyright(c) 2003- 2015 Intel Corporation
  601. [    3.900098] iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
  602. [    3.901823] thinkpad_acpi: radio switch found; radios are enabled
  603. [    3.901932] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
  604. [    3.901933] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
  605. [    3.902246] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
  606. [    3.902247] [drm] Driver supports precise vblank timestamp query.
  607. [    3.902654] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
  608. [    3.903751] iwlwifi 0000:03:00.0: firmware: direct-loading firmware iwlwifi-1000-5.ucode
  609. [    3.903843] iwlwifi 0000:03:00.0: loaded firmware version 39.31.5.1 build 35138 op_mode iwldvm
  610. [    3.904261] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
  611. [    3.904691] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
  612. [    3.906690] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input9
  613. [    3.919129] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled
  614. [    3.919131] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
  615. [    3.919132] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
  616. [    3.919133] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Wireless-N 1000 BGN, REV=0x6C
  617. [    3.957105] intel_rapl: Found RAPL domain package
  618. [    3.957106] intel_rapl: Found RAPL domain core
  619. [    3.957107] intel_rapl: Found RAPL domain uncore
  620. [    3.957113] intel_rapl: RAPL package 0 domain package locked by BIOS
  621. [    3.959728] [drm] Initialized i915 1.6.0 20170619 for 0000:00:02.0 on minor 0
  622. [    3.960147] ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
  623. [    3.961988] acpi device:00: registered as cooling_device5
  624. [    3.962070] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10
  625. [    3.962234] ACPI: Video Device [VID1] (multi-head: yes  rom: yes  post: no)
  626. [    3.963503] acpi device:0a: registered as cooling_device6
  627. [    3.963580] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:09/LNXVIDEO:01/input/input11
  628. [    3.965934] Adding 11237372k swap on /dev/sdb6.  Priority:-1 extents:1 across:11237372k SSFS
  629. [    3.967279] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
  630. [    3.979687] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
  631. [    3.979688] fbcon: inteldrmfb (fb0) is primary device
  632. [    4.004202] iTCO_vendor_support: vendor-support=0
  633. [    4.005498] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
  634. [    4.005544] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
  635. [    4.005851] snd_hda_codec_conexant hdaudioC0D0: CX20590: BIOS auto-probing.
  636. [    4.006125] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
  637. [    4.006323] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20590: line_outs=1 (0x1f/0x0/0x0/0x0/0x0) type:speaker
  638. [    4.006324] snd_hda_codec_conexant hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
  639. [    4.006325] snd_hda_codec_conexant hdaudioC0D0:    hp_outs=2 (0x1c/0x19/0x0/0x0/0x0)
  640. [    4.006326] snd_hda_codec_conexant hdaudioC0D0:    mono: mono_out=0x0
  641. [    4.006327] snd_hda_codec_conexant hdaudioC0D0:    inputs:
  642. [    4.006329] snd_hda_codec_conexant hdaudioC0D0:      Internal Mic=0x23
  643. [    4.006330] snd_hda_codec_conexant hdaudioC0D0:      Mic=0x1b
  644. [    4.006331] snd_hda_codec_conexant hdaudioC0D0:      Dock Mic=0x1a
  645. [    4.007658] snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for stable communication
  646. [    4.014172] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
  647. [    4.014328] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
  648. [    4.014385] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
  649. [    4.014453] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
  650. [    4.014513] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
  651. [    4.049672] iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0
  652. [    4.230916] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
  653. [    4.290502] audit: type=1400 audit(1512062275.857:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=557 comm="apparmor_parser"
  654. [    4.292836] audit: type=1400 audit(1512062275.859:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=558 comm="apparmor_parser"
  655. [    4.292839] audit: type=1400 audit(1512062275.859:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=558 comm="apparmor_parser"
  656. [    4.292841] audit: type=1400 audit(1512062275.859:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd//third_party" pid=558 comm="apparmor_parser"
  657. [    4.293747] audit: type=1400 audit(1512062275.860:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/mysqld-akonadi" pid=559 comm="apparmor_parser"
  658. [    4.293750] audit: type=1400 audit(1512062275.860:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/mysqld-akonadi///usr/sbin/mysqld" pid=559 comm="apparmor_parser"
  659. [    4.294264] audit: type=1400 audit(1512062275.861:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/mission-control-5" pid=556 comm="apparmor_parser"
  660. [    4.294269] audit: type=1400 audit(1512062275.861:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/telepathy-*" pid=556 comm="apparmor_parser"
  661. [    4.294272] audit: type=1400 audit(1512062275.861:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/telepathy-*//pxgsettings" pid=556 comm="apparmor_parser"
  662. [    4.445633] random: crng init done
  663. [    4.550125] bbswitch: loading out-of-tree module taints kernel.
  664. [    4.550330] bbswitch: version 0.8
  665. [    4.550335] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.VID_
  666. [    4.550341] bbswitch: Found discrete VGA device 0000:01:00.0: \_SB_.PCI0.PEG_.VID_
  667. [    4.550351] ACPI Warning: \_SB.PCI0.PEG.VID._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
  668. [    4.550704] bbswitch: detected an Optimus _DSM function
  669. [    4.550717] pci 0000:01:00.0: enabling device (0000 -> 0003)
  670. [    4.550751] bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is on
  671. [    4.551375] bbswitch: disabling discrete graphics
  672. [    4.551385] ACPI Warning: \_SB.PCI0.PEG.VID._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
  673. [    4.568668] thinkpad_acpi: EC reports that Thermal Table has changed
  674. [    4.606363] vboxdrv: Found 4 processor cores
  675. [    4.628138] vboxdrv: TSC mode is Invariant, tentative frequency 2591590672 Hz
  676. [    4.628138] vboxdrv: Successfully loaded version 5.1.30 (interface 0x002a0000)
  677. [    4.834464] VBoxNetFlt: Successfully started.
  678. [    4.837997] VBoxNetAdp: Successfully started.
  679. [    4.842400] VBoxPciLinuxInit
  680. [    4.843732] vboxpci: IOMMU not found (not registered)
  681. [    4.847396] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
  682. [    4.910323] Console: switching to colour frame buffer device 200x56
  683. [    4.931206] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
  684. [    5.084234] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
  685. [    5.089464] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
  686. [    5.094867] thinkpad_ec: thinkpad_ec 0.42 loaded.
  687. [    5.095514] hdaps: initial mode latch is 0x05
  688. [    5.095655] hdaps: setting ec_rate=250, filter_order=2
  689. [    5.095870] hdaps: device successfully initialized.
  690. [    5.095932] input: ThinkPad HDAPS joystick emulation as /devices/virtual/input/input17
  691. [    5.097301] input: ThinkPad HDAPS accelerometer data as /devices/virtual/input/input18
  692. [    5.097375] hdaps: driver successfully loaded.
  693. [    5.104931] iwlwifi 0000:03:00.0: Radio type=0x0-0x0-0x3
  694. [    5.113571] applesmc: supported laptop not found!
  695. [    5.113573] applesmc: driver init failed (ret=-19)!
  696. [    5.168220] acer_wmi: Acer Laptop ACPI-WMI Extras
  697. [    5.168227] acer_wmi: No or unsupported WMI interface, unable to load
  698. [    5.183549] iwlwifi 0000:03:00.0: Radio type=0x0-0x0-0x3
  699. [    5.221681] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
  700. [    5.247680] iwlwifi 0000:03:00.0: Radio type=0x0-0x0-0x3
  701. [    5.311833] iwlwifi 0000:03:00.0: Radio type=0x0-0x0-0x3
  702. [    5.345215] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
  703. [    5.427115] media: Linux media interface: v0.10
  704. [    5.430763] Linux video capture interface: v2.00
  705. [    5.440720] Bluetooth: Core ver 2.22
  706. [    5.440735] NET: Registered protocol family 31
  707. [    5.440736] Bluetooth: HCI device and connection manager initialized
  708. [    5.440739] Bluetooth: HCI socket layer initialized
  709. [    5.440741] Bluetooth: L2CAP socket layer initialized
  710. [    5.440750] Bluetooth: SCO socket layer initialized
  711. [    5.449424] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
  712. [    5.512654] usbcore: registered new interface driver btusb
  713. [    5.513138] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b217)
  714. [    5.514935] uvcvideo 1-1.6:1.0: Entity type for entity Extension 3 was not initialized!
  715. [    5.514938] uvcvideo 1-1.6:1.0: Entity type for entity Processing 2 was not initialized!
  716. [    5.514939] uvcvideo 1-1.6:1.0: Entity type for entity Camera 1 was not initialized!
  717. [    5.515051] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input19
  718. [    5.515148] usbcore: registered new interface driver uvcvideo
  719. [    5.515149] USB Video Class driver (1.1.1)
  720. [    5.605021] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  721. [    5.605022] Bluetooth: BNEP filters: protocol multicast
  722. [    5.605025] Bluetooth: BNEP socket layer initialized
  723. [    5.905958] iwlwifi 0000:03:00.0: Radio type=0x0-0x0-0x3
  724. [    5.975188] iwlwifi 0000:03:00.0: Radio type=0x0-0x0-0x3
  725. [    6.009159] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
  726. [    6.071387] wlp3s0: authenticate with 00:0f:3d:fa:c0:94
  727. [    6.075680] wlp3s0: send auth to 00:0f:3d:fa:c0:94 (try 1/3)
  728. [    6.096375] wlp3s0: authenticated
  729. [    6.096653] iwlwifi 0000:03:00.0 wlp3s0: disabling HT/VHT due to WEP/TKIP use
  730. [    6.096656] iwlwifi 0000:03:00.0 wlp3s0: disabling HT as WMM/QoS is not supported by the AP
  731. [    6.096658] iwlwifi 0000:03:00.0 wlp3s0: disabling VHT as WMM/QoS is not supported by the AP
  732. [    6.096661] wlp3s0: waiting for beacon from 00:0f:3d:fa:c0:94
  733. [    6.204063] wlp3s0: associate with 00:0f:3d:fa:c0:94 (try 1/3)
  734. [    6.217046] wlp3s0: RX AssocResp from 00:0f:3d:fa:c0:94 (capab=0x471 status=0 aid=2)
  735. [    6.220286] wlp3s0: associated
  736. [    6.220368] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
  737. [    6.578886] Bluetooth: RFCOMM TTY layer initialized
  738. [    6.578892] Bluetooth: RFCOMM socket layer initialized
  739. [    6.578896] Bluetooth: RFCOMM ver 1.11
  740. [    7.934040] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
  741. [    7.934081] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready
  742. [   13.186497] tp_smapi 0.42 loading...
  743. [   13.186596] tp_smapi successfully loaded (smapi_port=0xb2).
  744. [   52.684038] fuse init (API version 7.26)
  745. [   59.920221] pci 0000:05:00.0: [1912:0015] type 00 class 0x0c0330
  746. [   59.920301] pci 0000:05:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit]
  747. [   59.920582] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
  748. [   59.932198] pci 0000:05:00.0: BAR 0: assigned [mem 0xf3000000-0xf3001fff 64bit]
  749. [   59.932252] pci 0000:05:00.0: enabling device (0000 -> 0002)
  750. [   59.932561] xhci_hcd 0000:05:00.0: Resetting
  751. [   61.350577] xhci_hcd 0000:05:00.0: xHCI Host Controller
  752. [   61.350589] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 3
  753. [   61.355936] xhci_hcd 0000:05:00.0: hcc params 0x014051cf hci version 0x100 quirks 0x00000090
  754. [   61.356297] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
  755. [   61.356298] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  756. [   61.356299] usb usb3: Product: xHCI Host Controller
  757. [   61.356300] usb usb3: Manufacturer: Linux 4.13.0-0.bpo.1-amd64 xhci-hcd
  758. [   61.356300] usb usb3: SerialNumber: 0000:05:00.0
  759. [   61.356449] hub 3-0:1.0: USB hub found
  760. [   61.356508] hub 3-0:1.0: 2 ports detected
  761. [   61.356596] xhci_hcd 0000:05:00.0: xHCI Host Controller
  762. [   61.356599] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 4
  763. [   61.359417] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
  764. [   61.359443] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
  765. [   61.359444] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  766. [   61.359446] usb usb4: Product: xHCI Host Controller
  767. [   61.359447] usb usb4: Manufacturer: Linux 4.13.0-0.bpo.1-amd64 xhci-hcd
  768. [   61.359448] usb usb4: SerialNumber: 0000:05:00.0
  769. [   61.359601] hub 4-0:1.0: USB hub found
  770. [   61.359661] hub 4-0:1.0: 2 ports detected

Quellcode

Hier kannst du den Code kopieren und ihn in deinen bevorzugten Editor einfügen. Alternativ kannst du den gesamten Eintrag auch als Datei herunterladen.