dmesg
von wuppi- SNIPPET_DESC:
- Aktuelles dmesg
- SNIPPET_CREATION_TIME:
- 16.01.2018 08:23:00
- SNIPPET_PRUNE_TIME:
- Unendlich
- SNIPPET_TEXT:
-
- [ 0.000000] Linux version 4.9.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18) ) #1 SMP Debian 4.9.65-3+deb9u1 (2017- 12-23)
- [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-4-amd64 root=UUID=df fb9111-7b7b-408a-851a-c28b55c40a28 ro reboot=bios quiet radeon.audio=1 i915.disa ble_power_well=0 intel_iommu=on,igfx_off video=HDMI-1:e nmi_watchdog=0 acpi=off apm=off
- [ 0.000000] x86/fpu: Legacy x87 FPU detected.
- [ 0.000000] x86/fpu: Using 'eager' FPU context switches.
- [ 0.000000] e820: BIOS-provided physical RAM map:
- [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
- [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003fffffff] usable
- [ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000772d5fff] usable
- [ 0.000000] BIOS-e820: [mem 0x00000000772d6000-0x0000000077350fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x0000000077351000-0x0000000077455fff] usable
- [ 0.000000] BIOS-e820: [mem 0x0000000077456000-0x000000007785bfff] ACPI NVS
- [ 0.000000] BIOS-e820: [mem 0x000000007785c000-0x0000000077b83fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x0000000077b84000-0x0000000077d3dfff] usable
- [ 0.000000] BIOS-e820: [mem 0x0000000077d3e000-0x0000000077fc7fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x0000000077fc8000-0x0000000077ffffff] usable
- [ 0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable
- [ 0.000000] NX (Execute Disable) protection: active
- [ 0.000000] SMBIOS 2.8 present.
- [ 0.000000] DMI: GIGABYTE GB-BACE-3150/MZBSWBP-00, BIOS F4 12/23/2016
- [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
- [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
- [ 0.000000] e820: last_pfn = 0x180000 max_arch_pfn = 0x400000000
- [ 0.000000] MTRR default type: uncachable
- [ 0.000000] MTRR fixed ranges enabled:
- [ 0.000000] 00000-9FFFF write-back
- [ 0.000000] A0000-BFFFF uncachable
- [ 0.000000] C0000-FFFFF write-protect
- [ 0.000000] MTRR variable ranges enabled:
- [ 0.000000] 0 base 000000000 mask F80000000 write-back
- [ 0.000000] 1 base 07C800000 mask FFF800000 uncachable
- [ 0.000000] 2 base 07D000000 mask FFF000000 uncachable
- [ 0.000000] 3 base 07E000000 mask FFE000000 uncachable
- [ 0.000000] 4 base 100000000 mask F80000000 write-back
- [ 0.000000] 5 disabled
- [ 0.000000] 6 disabled
- [ 0.000000] 7 disabled
- [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
- [ 0.000000] e820: update [mem 0x7c800000-0xffffffff] usable ==> reserved
- [ 0.000000] e820: last_pfn = 0x78000 max_arch_pfn = 0x400000000
- [ 0.000000] found SMP MP-table at [mem 0x000fd860-0x000fd86f] mapped at [ffff 9d1d800fd860]
- [ 0.000000] Base memory trampoline at [ffff9d1d80097000] 97000 size 24576
- [ 0.000000] BRK [0x17812f000, 0x17812ffff] PGTABLE
- [ 0.000000] BRK [0x178130000, 0x178130fff] PGTABLE
- [ 0.000000] BRK [0x178131000, 0x178131fff] PGTABLE
- [ 0.000000] BRK [0x178132000, 0x178132fff] PGTABLE
- [ 0.000000] BRK [0x178133000, 0x178133fff] PGTABLE
- [ 0.000000] BRK [0x178134000, 0x178134fff] PGTABLE
- [ 0.000000] BRK [0x178135000, 0x178135fff] PGTABLE
- [ 0.000000] BRK [0x178136000, 0x178136fff] PGTABLE
- [ 0.000000] BRK [0x178137000, 0x178137fff] PGTABLE
- [ 0.000000] BRK [0x178138000, 0x178138fff] PGTABLE
- [ 0.000000] BRK [0x178139000, 0x178139fff] PGTABLE
- [ 0.000000] BRK [0x17813a000, 0x17813afff] PGTABLE
- [ 0.000000] RAMDISK: [mem 0x35d09000-0x36e7bfff]
- [ 0.000000] No NUMA configuration found
- [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000017fffffff]
- [ 0.000000] NODE_DATA(0) allocated [mem 0x17fffb000-0x17fffffff]
- [ 0.000000] Zone ranges:
- [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
- [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
- [ 0.000000] Normal [mem 0x0000000100000000-0x000000017fffffff]
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff]
- [ 0.000000] node 0: [mem 0x0000000000100000-0x000000003fffffff]
- [ 0.000000] node 0: [mem 0x0000000040200000-0x00000000772d5fff]
- [ 0.000000] node 0: [mem 0x0000000077351000-0x0000000077455fff]
- [ 0.000000] node 0: [mem 0x0000000077b84000-0x0000000077d3dfff]
- [ 0.000000] node 0: [mem 0x0000000077fc8000-0x0000000077ffffff]
- [ 0.000000] node 0: [mem 0x0000000100000000-0x000000017fffffff]
- [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000017fffffff]
- [ 0.000000] On node 0 totalpages: 1012585
- [ 0.000000] DMA zone: 64 pages used for memmap
- [ 0.000000] DMA zone: 21 pages reserved
- [ 0.000000] DMA zone: 3996 pages, LIFO batch:0
- [ 0.000000] DMA32 zone: 7568 pages used for memmap
- [ 0.000000] DMA32 zone: 484301 pages, LIFO batch:31
- [ 0.000000] Normal zone: 8192 pages used for memmap
- [ 0.000000] Normal zone: 524288 pages, LIFO batch:31
- [ 0.000000] Reserving Intel graphics memory at 0x000000007cf00000-0x000000007 eefffff
- [ 0.000000] SFI: Simple Firmware Interface v0.81 http://simplefirmware.org
- [ 0.000000] Intel MultiProcessor Specification v1.4
- [ 0.000000] MPTABLE: OEM ID: A M I
- [ 0.000000] MPTABLE: Product ID: ALASKA
- [ 0.000000] MPTABLE: APIC at: 0xFEE00000
- [ 0.000000] Processor #0 (Bootup-CPU)
- [ 0.000000] Processor #2
- [ 0.000000] Processor #4
- [ 0.000000] Processor #6
- [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-114
- [ 0.000000] Processors: 4
- [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
- [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x772d6000-0x77350fff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x77456000-0x7785bfff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x7785c000-0x77b83fff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x77d3e000-0x77fc7fff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x78000000-0x7cefffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x7cf00000-0x7eefffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x7ef00000-0xe00f7fff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xe00f8000-0xe00f8fff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xe00f9000-0xfed00fff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed01fff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xfed02000-0xfed07fff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xfed09000-0xffafffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xffb00000-0xffffffff]
- [ 0.000000] e820: [mem 0x7ef00000-0xe00f7fff] available for PCI devices
- [ 0.000000] Booting paravirtualized kernel on bare hardware
- [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffff ffff, max_idle_ns: 7645519600211568 ns
- [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_nod e_ids:1
- [ 0.000000] percpu: Embedded 35 pages/cpu @ffff9d1effc00000 s103448 r8192 d31 720 u524288
- [ 0.000000] pcpu-alloc: s103448 r8192 d31720 u524288 alloc=1*2097152
- [ 0.000000] pcpu-alloc: [0] 0 1 2 3
- [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pag es: 996740
- [ 0.000000] Policy zone: Normal
- [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-4-amd64 root= UUID=dffb9111-7b7b-408a-851a-c28b55c40a28 ro reboot=bios quiet radeon.audio=1 i9 15.disable_power_well=0 intel_iommu=on,igfx_off video=HDMI-1:e nmi_watchdog=0 ac pi=off apm=off
- [ 0.000000] DMAR: IOMMU enabled
- [ 0.000000] DMAR: Disable GFX device mapping
- [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
- [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
- [ 0.000000] Memory: 3886708K/4050340K available (6195K kernel code, 1137K rwd ata, 2856K rodata, 1396K init, 688K bss, 163632K reserved, 0K cma-reserved)
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
- [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
- [ 0.000000] NR_IRQS:33024 nr_irqs:1024 16
- [ 0.000000] spurious 8259A interrupt: IRQ7.
- [ 0.000000] Console: colour VGA+ 80x25
- [ 0.000000] console [tty0] enabled
- [ 0.000000] tsc: Detected 1600.000 MHz processor
- [ 0.000035] Calibrating delay loop (skipped), value calculated using timer fr equency.. 3200.00 BogoMIPS (lpj=6400000)
- [ 0.000041] pid_max: default: 32768 minimum: 301
- [ 0.000187] Security Framework initialized
- [ 0.000190] Yama: disabled by default; enable with sysctl kernel.yama.*
- [ 0.004562] CPU: Physical Processor ID: 0
- [ 0.004565] CPU: Processor Core ID: 0
- [ 0.004571] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
- [ 0.004572] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
- [ 0.004583] mce: CPU supports 6 MCE banks
- [ 0.004594] CPU0: Thermal monitoring enabled (TM1)
- [ 0.004601] process: using mwait in idle threads
- [ 0.004607] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
- [ 0.004608] Last level dTLB entries: 4KB 256, 2MB 16, 4MB 16, 1GB 0
- [ 0.005004] Freeing SMP alternatives memory: 24K
- [ 0.007073] ftrace: allocating 25200 entries in 99 pages
- [ 0.026930] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
- [ 0.066645] TSC deadline timer enabled
- [ 0.066650] smpboot: CPU0: Intel(R) Celeron(R) CPU N3150 @ 1.60GHz (family: 0x6, model: 0x4c, stepping: 0x3)
- [ 0.066658] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, 8- deep LBR, full-width counters, Intel PMU driver.
- [ 0.066688] ... version: 3
- [ 0.066690] ... bit width: 40
- [ 0.066691] ... generic registers: 2
- [ 0.066693] ... value mask: 000000ffffffffff
- [ 0.066695] ... fixed-purpose events: 3
- [ 0.066696] ... event mask: 0000000700000003
- [ 0.068338] x86: Booting SMP configuration:
- [ 0.068341] .... node #0, CPUs: #1 #2 #3
- [ 0.075767] x86: Booted up 1 node, 4 CPUs
- [ 0.075771] smpboot: Total of 4 processors activated (12800.00 BogoMIPS)
- [ 0.077381] devtmpfs: initialized
- [ 0.077547] x86/mm: Memory block size: 128MB
- [ 0.085853] PM: Registering ACPI NVS region [mem 0x77456000-0x7785bfff] (4218 880 bytes)
- [ 0.086240] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ma x_idle_ns: 7645041785100000 ns
- [ 0.086373] pinctrl core: initialized pinctrl subsystem
- [ 0.086677] NET: Registered protocol family 16
- [ 0.095695] cpuidle: using governor ladder
- [ 0.111710] cpuidle: using governor menu
- [ 0.111976] PCI: Using configuration type 1 for base access
- [ 0.128081] HugeTLB registered 2 MB page size, pre-allocated 0 pages
- [ 0.128731] ACPI: Interpreter disabled.
- [ 0.128874] vgaarb: loaded
- [ 0.129038] PCI: Probing PCI hardware
- [ 0.129041] PCI: root bus 00: using default resources
- [ 0.129044] PCI: Probing PCI hardware (bus 00)
- [ 0.129116] PCI host bridge to bus 0000:00
- [ 0.129123] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
- [ 0.129126] pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff]
- [ 0.129129] pci_bus 0000:00: No busn resource found for root bus, will use [b us 00-ff]
- [ 0.129144] pci 0000:00:00.0: [8086:2280] type 00 class 0x060000
- [ 0.129282] pci 0000:00:02.0: [8086:22b1] type 00 class 0x030000
- [ 0.129306] pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x90ffffff 64bit]
- [ 0.129320] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff 64bit pref ]
- [ 0.129329] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
- [ 0.129451] vgaarb: setting as boot device: PCI:0000:00:02.0
- [ 0.129454] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem ,locks=none
- [ 0.129506] pci 0000:00:10.0: [8086:2294] type 00 class 0x080501
- [ 0.129529] pci 0000:00:10.0: reg 0x10: [mem 0x91516000-0x91516fff]
- [ 0.129635] pci 0000:00:10.0: PME# supported from D0 D3hot
- [ 0.129750] pci 0000:00:13.0: [8086:22a3] type 00 class 0x010601
- [ 0.129813] pci 0000:00:13.0: reg 0x20: [io 0xf060-0xf07f]
- [ 0.129826] pci 0000:00:13.0: reg 0x24: [mem 0x91515000-0x915157ff]
- [ 0.129887] pci 0000:00:13.0: PME# supported from D3hot
- [ 0.130003] pci 0000:00:14.0: [8086:22b5] type 00 class 0x0c0330
- [ 0.130035] pci 0000:00:14.0: reg 0x10: [mem 0x91500000-0x9150ffff 64bit]
- [ 0.130128] pci 0000:00:14.0: PME# supported from D3hot D3cold
- [ 0.130246] pci 0000:00:1a.0: [8086:2298] type 00 class 0x108000
- [ 0.130269] pci 0000:00:1a.0: reg 0x10: [mem 0x91100000-0x911fffff]
- [ 0.130282] pci 0000:00:1a.0: reg 0x14: [mem 0x91000000-0x910fffff]
- [ 0.130374] pci 0000:00:1a.0: PME# supported from D0 D3hot
- [ 0.130487] pci 0000:00:1b.0: [8086:2284] type 00 class 0x040300
- [ 0.130518] pci 0000:00:1b.0: reg 0x10: [mem 0x91510000-0x91513fff 64bit]
- [ 0.130625] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
- [ 0.130736] pci 0000:00:1c.0: [8086:22c8] type 01 class 0x060400
- [ 0.130837] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
- [ 0.130955] pci 0000:00:1c.1: [8086:22ca] type 01 class 0x060400
- [ 0.131054] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
- [ 0.131168] pci 0000:00:1c.3: [8086:22ce] type 01 class 0x060400
- [ 0.131267] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
- [ 0.131388] pci 0000:00:1f.0: [8086:229c] type 00 class 0x060100
- [ 0.131610] pci 0000:00:1f.3: [8086:2292] type 00 class 0x0c0500
- [ 0.131663] pci 0000:00:1f.3: reg 0x10: [mem 0x91514000-0x9151401f]
- [ 0.131794] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
- [ 0.132143] pci 0000:01:00.0: [10ec:522a] type 00 class 0xff0000
- [ 0.132166] pci 0000:01:00.0: reg 0x10: [mem 0x91400000-0x91400fff]
- [ 0.132323] pci 0000:01:00.0: supports D1 D2
- [ 0.132326] pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold
- [ 0.143773] pci 0000:00:1c.0: PCI bridge to [bus 01]
- [ 0.143783] pci 0000:00:1c.0: bridge window [mem 0x91400000-0x914fffff]
- [ 0.143910] pci 0000:02:00.0: [8086:08b3] type 00 class 0x028000
- [ 0.143956] pci 0000:02:00.0: reg 0x10: [mem 0x91300000-0x91301fff 64bit]
- [ 0.144180] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
- [ 0.155791] pci 0000:00:1c.1: PCI bridge to [bus 02]
- [ 0.155801] pci 0000:00:1c.1: bridge window [mem 0x91300000-0x913fffff]
- [ 0.155912] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
- [ 0.155935] pci 0000:03:00.0: reg 0x10: [io 0xe000-0xe0ff]
- [ 0.155975] pci 0000:03:00.0: reg 0x18: [mem 0x91204000-0x91204fff 64bit]
- [ 0.155999] pci 0000:03:00.0: reg 0x20: [mem 0x91200000-0x91203fff 64bit]
- [ 0.156095] pci 0000:03:00.0: supports D1 D2
- [ 0.156098] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.167803] pci 0000:00:1c.3: PCI bridge to [bus 03]
- [ 0.167809] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff]
- [ 0.167815] pci 0000:00:1c.3: bridge window [mem 0x91200000-0x912fffff]
- [ 0.167930] pci 0000:00:1f.0: default IRQ router [8086:229c]
- [ 0.167936] PCI: pci_cache_line_size set to 64 bytes
- [ 0.168015] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
- [ 0.168019] e820: reserve RAM buffer [mem 0x772d6000-0x77ffffff]
- [ 0.168021] e820: reserve RAM buffer [mem 0x77456000-0x77ffffff]
- [ 0.168023] e820: reserve RAM buffer [mem 0x77d3e000-0x77ffffff]
- [ 0.168472] clocksource: Switched to clocksource refined-jiffies
- [ 0.184495] VFS: Disk quotas dquot_6.6.0
- [ 0.184746] pnp: PnP ACPI: disabled
- [ 0.189696] pci 0000:00:1c.0: PCI bridge to [bus 01]
- [ 0.189706] pci 0000:00:1c.0: bridge window [mem 0x91400000-0x914fffff]
- [ 0.189719] pci 0000:00:1c.1: PCI bridge to [bus 02]
- [ 0.189726] pci 0000:00:1c.1: bridge window [mem 0x91300000-0x913fffff]
- [ 0.189738] pci 0000:00:1c.3: PCI bridge to [bus 03]
- [ 0.189742] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff]
- [ 0.189749] pci 0000:00:1c.3: bridge window [mem 0x91200000-0x912fffff]
- [ 0.189761] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
- [ 0.189764] pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff]
- [ 0.189767] pci_bus 0000:01: resource 1 [mem 0x91400000-0x914fffff]
- [ 0.189771] pci_bus 0000:02: resource 1 [mem 0x91300000-0x913fffff]
- [ 0.189774] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
- [ 0.189776] pci_bus 0000:03: resource 1 [mem 0x91200000-0x912fffff]
- [ 0.189879] NET: Registered protocol family 2
- [ 0.190935] NET: Registered protocol family 1
- [ 0.190978] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c00 00-0x000dffff]
- [ 0.191013] pci 0000:00:14.0: PCI->APIC IRQ transform: INT A -> IRQ 20
- [ 0.198871] PCI: CLS 0 bytes, default 64
- [ 0.198991] Unpacking initramfs...
- [ 0.813593] Freeing initrd memory: 17868K
- [ 0.813666] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
- [ 0.813672] software IO TLB [mem 0x732d6000-0x772d6000] (64MB) mapped at [fff f9d1df32d6000-ffff9d1df72d5fff]
- [ 0.813910] platform rtc_cmos: registered platform RTC device (no PNP device found)
- [ 0.814797] audit: initializing netlink subsys (disabled)
- [ 0.814845] audit: type=2000 audit(1516084336.804:1): initialized
- [ 0.815716] workingset: timestamp_bits=40 max_order=20 bucket_order=0
- [ 0.815806] zbud: loaded
- [ 0.817516] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 2 50)
- [ 0.817591] io scheduler noop registered
- [ 0.817593] io scheduler deadline registered
- [ 0.817640] io scheduler cfq registered (default)
- [ 0.817827] pcieport 0000:00:1c.0: PCI->APIC IRQ transform: INT A -> IRQ 16
- [ 0.818041] pcieport 0000:00:1c.1: PCI->APIC IRQ transform: INT B -> IRQ 17
- [ 0.818211] pcieport 0000:00:1c.3: PCI->APIC IRQ transform: INT D -> IRQ 19
- [ 0.818444] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
- [ 0.818447] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
- [ 0.818454] pcie_pme 0000:00:1c.0:pcie001: service driver pcie_pme loaded
- [ 0.818495] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
- [ 0.818498] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
- [ 0.818504] pcie_pme 0000:00:1c.1:pcie001: service driver pcie_pme loaded
- [ 0.818548] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
- [ 0.818550] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
- [ 0.818556] pcie_pme 0000:00:1c.3:pcie001: service driver pcie_pme loaded
- [ 0.818583] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
- [ 0.818596] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
- [ 0.818632] intel_idle: MWAIT substates: 0x33000020
- [ 0.818634] intel_idle: v0.4.1 model 0x4C
- [ 0.819046] intel_idle: lapic_timer_reliable_states 0xffffffff
- [ 0.819199] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- [ 0.840560] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
- [ 0.841619] Linux agpgart interface v0.103
- [ 0.841753] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
- [ 0.843038] i8042: PNP: No PS/2 controller found. Probing ports directly.
- [ 1.876261] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x171024fa 93b, max_idle_ns: 440795253189 ns
- [ 1.897026] i8042: No controller found
- [ 1.897043] clocksource: Switched to clocksource tsc
- [ 1.897717] mousedev: PS/2 mouse device common for all mice
- [ 1.898238] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
- [ 1.898294] rtc_cmos rtc_cmos: alarms up to one day, 114 bytes nvram
- [ 1.898311] intel_pstate: Intel P-state driver initializing
- [ 1.899610] ledtrig-cpu: registered to indicate activity on CPUs
- [ 1.903420] NET: Registered protocol family 10
- [ 1.905920] mip6: Mobile IPv6
- [ 1.905933] NET: Registered protocol family 17
- [ 1.905953] mpls_gso: MPLS GSO support
- [ 1.908258] microcode: sig=0x406c3, pf=0x1, revision=0x33c
- [ 1.909326] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet. co.uk>, Peter Oruba
- [ 1.912872] registered taskstats version 1
- [ 1.912922] zswap: loaded using pool lzo/zbud
- [ 1.913643] ima: No TPM chip found, activating TPM-bypass!
- [ 1.914162] PM: Hibernation image not present or could not be loaded.
- [ 1.916818] Freeing unused kernel memory: 1396K
- [ 1.916821] Write protecting the kernel read-only data: 12288k
- [ 1.918401] Freeing unused kernel memory: 1980K
- [ 1.924752] Freeing unused kernel memory: 1240K
- [ 1.934768] x86/mm: Checked W+X mappings: passed, no W+X pages found.
- [ 2.009915] random: systemd-udevd: uninitialized urandom read (16 bytes read)
- [ 2.010652] random: systemd-udevd: uninitialized urandom read (16 bytes read)
- [ 2.010752] random: systemd-udevd: uninitialized urandom read (16 bytes read)
- [ 2.015328] random: udevadm: uninitialized urandom read (16 bytes read)
- [ 2.015570] random: udevadm: uninitialized urandom read (16 bytes read)
- [ 2.019098] random: udevadm: uninitialized urandom read (16 bytes read)
- [ 2.019241] random: udevadm: uninitialized urandom read (16 bytes read)
- [ 2.019385] random: udevadm: uninitialized urandom read (16 bytes read)
- [ 2.019521] random: udevadm: uninitialized urandom read (16 bytes read)
- [ 2.019668] random: udevadm: uninitialized urandom read (16 bytes read)
- [ 2.050731] sdhci: Secure Digital Host Controller Interface driver
- [ 2.050733] sdhci: Copyright(c) Pierre Ossman
- [ 2.051278] sdhci-pci 0000:00:10.0: SDHCI controller found [8086:2294] (rev 2 1)
- [ 2.051304] sdhci-pci 0000:00:10.0: PCI->APIC IRQ transform: INT A -> IRQ 16
- [ 2.055512] rtsx_pci 0000:01:00.0: PCI->APIC IRQ transform: INT A -> IRQ 16
- [ 2.055641] rtsx_pci 0000:01:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci ->irq = 118
- [ 2.055709] mmc0: SDHCI controller on PCI [0000:00:10.0] using ADMA
- [ 2.055814] usbcore: registered new interface driver usbfs
- [ 2.055853] usbcore: registered new interface driver hub
- [ 2.055915] usbcore: registered new device driver usb
- [ 2.058318] xhci_hcd 0000:00:14.0: PCI->APIC IRQ transform: INT A -> IRQ 20
- [ 2.058373] xhci_hcd 0000:00:14.0: xHCI Host Controller
- [ 2.058386] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus numbe r 1
- [ 2.059559] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 qu irks 0x01509810
- [ 2.059574] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
- [ 2.059774] SCSI subsystem initialized
- [ 2.059831] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 2.059835] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber= 1
- [ 2.059837] usb usb1: Product: xHCI Host Controller
- [ 2.059839] usb usb1: Manufacturer: Linux 4.9.0-4-amd64 xhci-hcd
- [ 2.059841] usb usb1: SerialNumber: 0000:00:14.0
- [ 2.059895] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
- [ 2.059924] r8169 0000:03:00.0: PCI->APIC IRQ transform: INT A -> IRQ 19
- [ 2.060141] hub 1-0:1.0: USB hub found
- [ 2.060166] hub 1-0:1.0: 7 ports detected
- [ 2.060542] xhci_hcd 0000:00:14.0: xHCI Host Controller
- [ 2.060551] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus numbe r 2
- [ 2.060640] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
- [ 2.060643] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber= 1
- [ 2.060645] usb usb2: Product: xHCI Host Controller
- [ 2.060647] usb usb2: Manufacturer: Linux 4.9.0-4-amd64 xhci-hcd
- [ 2.060649] usb usb2: SerialNumber: 0000:00:14.0
- [ 2.060868] hub 2-0:1.0: USB hub found
- [ 2.060894] hub 2-0:1.0: 6 ports detected
- [ 2.061333] ACPI: <n/a>: failed to evaluate _DSM (0x1001)
- [ 2.062664] libata version 3.00 loaded.
- [ 2.063022] i801_smbus 0000:00:1f.3: PCI->APIC IRQ transform: INT B -> IRQ 18
- [ 2.063093] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
- [ 2.064072] ahci 0000:00:13.0: version 3.0
- [ 2.064094] ahci 0000:00:13.0: PCI->APIC IRQ transform: INT A -> IRQ 19
- [ 2.064247] ahci 0000:00:13.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 imp l SATA mode
- [ 2.064251] ahci 0000:00:13.0: flags: 64bit ncq ilck pm led clo only pio slum part deso sadm sds apst
- [ 2.064964] scsi host0: ahci
- [ 2.065193] scsi host1: ahci
- [ 2.070142] SSE version of gcm_enc/dec engaged.
- [ 2.070343] r8169 0000:03:00.0 eth0: RTL8168h/8111h at 0xffffaa8b00655000, 1c :1b:0d:dd:6b:79, XID 14100800 IRQ 121
- [ 2.070348] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx c hecksumming: ko]
- [ 2.385365] usb 1-1: new low-speed USB device number 2 using xhci_hcd
- [ 2.391884] ata2.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
- [ 2.399015] ata2.00: configured for UDMA/133
- [ 2.400798] scsi 1:0:0:0: Direct-Access ATA ST160LM000 HM161 0001 PQ : 0 ANSI: 5
- [ 2.446204] sd 1:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
- [ 2.446613] sd 1:0:0:0: [sda] Write Protect is off
- [ 2.446628] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 2.446800] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, does n't support DPO or FUA
- [ 2.501192] sda: sda1 sda2 < sda5 >
- [ 2.504492] sd 1:0:0:0: [sda] Attached SCSI disk
- [ 2.536930] usb 1-1: New USB device found, idVendor=046a, idProduct=0023
- [ 2.536965] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 2.546445] hidraw: raw HID events driver (C) Jiri Kosina
- [ 2.563385] usbcore: registered new interface driver usbhid
- [ 2.563389] usbhid: USB HID core driver
- [ 2.565947] input: HID 046a:0023 as /devices/pci0000:00/0000:00:14.0/usb1/1-1 /1-1:1.0/0003:046A:0023.0001/input/input0
- [ 2.630392] cherry 0003:046A:0023.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 046a:0023] on usb-0000:00:14.0-1/input0
- [ 2.634027] input: HID 046a:0023 as /devices/pci0000:00/0000:00:14.0/usb1/1-1 /1-1:1.1/0003:046A:0023.0002/input/input1
- [ 2.649448] usb 2-4: new SuperSpeed USB device number 2 using xhci_hcd
- [ 2.674011] usb 2-4: New USB device found, idVendor=0424, idProduct=5537
- [ 2.674023] usb 2-4: New USB device strings: Mfr=2, Product=3, SerialNumber=0
- [ 2.674031] usb 2-4: Product: USB5537
- [ 2.674037] usb 2-4: Manufacturer: SMSC
- [ 2.675846] hub 2-4:1.0: USB hub found
- [ 2.676148] hub 2-4:1.0: 7 ports detected
- [ 2.693296] cherry 0003:046A:0023.0002: input,hidraw1: USB HID v1.11 Device [ HID 046a:0023] on usb-0000:00:14.0-1/input1
- [ 2.793010] usb 1-2: new low-speed USB device number 3 using xhci_hcd
- [ 2.938872] usb 1-2: New USB device found, idVendor=15ca, idProduct=00c3
- [ 2.938885] usb 1-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
- [ 2.938895] usb 1-2: Product: USB Optical Mouse
- [ 2.950557] input: USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1 /1-2/1-2:1.0/0003:15CA:00C3.0003/input/input2
- [ 2.950918] hid-generic 0003:15CA:00C3.0003: input,hidraw2: USB HID v1.10 Mou se [USB Optical Mouse] on usb-0000:00:14.0-2/input0
- [ 2.956788] PM: Starting manual resume from disk
- [ 2.956795] PM: Hibernation image partition 8:5 present
- [ 2.956796] PM: Looking for hibernation image.
- [ 2.957366] PM: Image not found (code -22)
- [ 2.957368] PM: Hibernation image not present or could not be loaded.
- [ 2.982159] random: fast init done
- [ 3.069303] usb 1-4: new high-speed USB device number 4 using xhci_hcd
- [ 3.210872] usb 1-4: New USB device found, idVendor=0424, idProduct=2137
- [ 3.210885] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 3.210895] usb 1-4: Product: USB2137
- [ 3.210902] usb 1-4: Manufacturer: SMSC
- [ 3.212461] hub 1-4:1.0: USB hub found
- [ 3.212550] hub 1-4:1.0: 7 ports detected
- [ 3.222339] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
- [ 3.333471] usb 1-5: new full-speed USB device number 5 using xhci_hcd
- [ 3.476315] usb 1-5: New USB device found, idVendor=8087, idProduct=07dc
- [ 3.476328] usb 1-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 3.553500] usb 1-4.7: new full-speed USB device number 6 using xhci_hcd
- [ 3.675476] usb 1-4.7: New USB device found, idVendor=0457, idProduct=1139
- [ 3.675490] usb 1-4.7: New USB device strings: Mfr=1, Product=2, SerialNumber =0
- [ 3.675501] usb 1-4.7: Product: SiS HID Touch Controller
- [ 3.675509] usb 1-4.7: Manufacturer: USBest Technology
- [ 4.659800] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 4.824120] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SEL INUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL + XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
- [ 4.825187] systemd[1]: Detected architecture x86-64.
- [ 4.842922] systemd[1]: Set hostname to <primus>.
- [ 6.059768] systemd[1]: Listening on Syslog Socket.
- [ 6.060099] systemd[1]: Started Forward Password Requests to Wall Directory W atch.
- [ 6.060617] systemd[1]: Set up automount Arbitrary Executable File Formats Fi le System Automount Point.
- [ 6.060809] systemd[1]: Started Dispatch Password Requests to Console Directo ry Watch.
- [ 6.060987] systemd[1]: Listening on Journal Socket (/dev/log).
- [ 6.061158] systemd[1]: Listening on Journal Socket.
- [ 6.061299] systemd[1]: Listening on udev Kernel Socket.
- [ 6.076358] random: crng init done
- [ 6.582132] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
- [ 6.919614] systemd-journald[210]: Received request to flush runtime journal from PID 1
- [ 7.136990] lp: driver loaded but no devices found
- [ 7.205109] ppdev: user-space parallel port driver
- [ 7.348193] RPC: Registered named UNIX socket transport module.
- [ 7.348197] RPC: Registered udp transport module.
- [ 7.348199] RPC: Registered tcp transport module.
- [ 7.348201] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 7.368196] parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
- [ 7.505290] parport0: irq 0 detected
- [ 7.605893] lp0: using parport0 (polling).
- [ 8.796654] input: PC Speaker as /devices/platform/pcspkr/input/input3
- [ 9.592145] sd 1:0:0:0: Attached scsi generic sg0 type 0
- [ 9.787216] [drm] Initialized
- [ 9.830113] intel_rapl: Found RAPL domain package
- [ 9.830139] intel_rapl: Found RAPL domain core
- [ 10.121497] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
- [ 10.122216] iTCO_vendor_support: vendor-support=0
- [ 10.256029] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
- [ 10.256192] iTCO_wdt: Found a Braswell SoC TCO device (Version=3, TCOBASE=0x0 460)
- [ 10.256891] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
- [ 10.560447] snd_hda_intel 0000:00:1b.0: PCI->APIC IRQ transform: INT A -> IRQ 22
- [ 10.610645] snd_hda_intel 0000:00:1b.0: failed to add i915 component master ( -19)
- [ 10.616132] input: USBest Technology SiS HID Touch Controller as /devices/pci 0000:00/0000:00:14.0/usb1/1-4/1-4.7/1-4.7:1.0/0003:0457:1139.0004/input/input4
- [ 10.616829] hid-multitouch 0003:0457:1139.0004: input,hiddev0,hidraw3: USB HI D v1.11 Device [USBest Technology SiS HID Touch Controller] on usb-0000:00:14.0- 4.7/input0
- [ 10.754338] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC255: line_ou ts=1 (0x21/0x0/0x0/0x0/0x0) type:hp
- [ 10.754343] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0 /0x0/0x0)
- [ 10.754345] snd_hda_codec_realtek hdaudioC0D0: hp_outs=0 (0x0/0x0/0x0/0x0/ 0x0)
- [ 10.754347] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
- [ 10.754349] snd_hda_codec_realtek hdaudioC0D0: inputs:
- [ 10.754352] snd_hda_codec_realtek hdaudioC0D0: Mic=0x1b
- [ 10.795602] Bluetooth: Core ver 2.22
- [ 10.795647] NET: Registered protocol family 31
- [ 10.795650] Bluetooth: HCI device and connection manager initialized
- [ 10.795660] Bluetooth: HCI socket layer initialized
- [ 10.795666] Bluetooth: L2CAP socket layer initialized
- [ 10.795682] Bluetooth: SCO socket layer initialized
- [ 10.805041] snd_hda_codec_hdmi hdaudioC0D2: No i915 binding for Intel HDMI/DP codec
- [ 10.805668] snd_hda_codec_hdmi hdaudioC0D2: No i915 binding for Intel HDMI/DP codec
- [ 10.813132] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sou nd/card0/input6
- [ 10.814318] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/soun d/card0/input7
- [ 10.814473] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b. 0/sound/card0/input8
- [ 10.814622] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00 :1b.0/sound/card0/input9
- [ 10.977384] usbcore: registered new interface driver btusb
- [ 10.990949] Bluetooth: hci0: read Intel version: 3707100100012d0d27
- [ 10.990952] Bluetooth: hci0: Intel device is already patched. patch num: 27
- [ 11.617201] Intel(R) Wireless WiFi driver for Linux
- [ 11.617206] Copyright(c) 2003- 2015 Intel Corporation
- [ 11.617423] iwlwifi 0000:02:00.0: PCI->APIC IRQ transform: INT A -> IRQ 17
- [ 12.636145] iwlwifi 0000:02:00.0: firmware: direct-loading firmware iwlwifi-3 160-17.ucode
- [ 12.637722] iwlwifi 0000:02:00.0: loaded firmware version 17.352738.0 op_mode iwlmvm
- [ 12.788023] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 316 0, REV=0x164
- [ 12.792980] iwlwifi 0000:02:00.0: L1 Disabled - LTR Enabled
- [ 12.793240] iwlwifi 0000:02:00.0: L1 Disabled - LTR Enabled
- [ 13.343872] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
- [ 13.632401] Adding 12927996k swap on /dev/sda5. Priority:-1 extents:1 across :12927996k FS
- [ 15.721574] r8169 0000:03:00.0: firmware: direct-loading firmware rtl_nic/rtl 8168h-2.fw
- [ 15.740148] r8169 0000:03:00.0 eth0: link down
- [ 15.740185] r8169 0000:03:00.0 eth0: link down
- [ 15.740360] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 18.933249] r8169 0000:03:00.0 eth0: link up
- [ 18.933285] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
- [ 37.187625] NET: Registered protocol family 4
- [ 37.307546] NET: Registered protocol family 3
- [ 37.323745] NET: Registered protocol family 5
- [ 59.743625] fuse init (API version 7.26)
Quellcode
Hier kannst du den Code kopieren und ihn in deinen bevorzugten Editor einfügen. PASTEBIN_DOWNLOAD_SNIPPET_EXPLAIN