sda
von unix1988- SNIPPET_DESC:
- smarctl
- SNIPPET_CREATION_TIME:
- 08.04.2018 12:28:32
- SNIPPET_PRUNE_TIME:
- Unendlich
- SNIPPET_TEXT:
-
- smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.16.0] (local build)
- 2 Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
- 3
- 4 === START OF INFORMATION SECTION ===
- 5 Model Family: Seagate Samsung SpinPoint M8 (AF)
- 6 Device Model: ST1000LM024 HN-M101MBB
- 7 Serial Number: S2R8J9CCA05310
- 8 LU WWN Device Id: 5 0004cf 208acf557
- 9 Firmware Version: 2AR10002
- 10 User Capacity: 1.000.204.886.016 bytes [1,00 TB]
- 11 Sector Sizes: 512 bytes logical, 4096 bytes physical
- 12 Rotation Rate: 5400 rpm
- 13 Form Factor: 2.5 inches
- 14 Device is: In smartctl database [for details use: -P show]
- 15 ATA Version is: ATA8-ACS T13/1699-D revision 6
- 18 SMART support is: Available - device has SMART capability.
- 19 SMART support is: Enabled
- 20
- 21 === START OF READ SMART DATA SECTION ===
- 22 SMART overall-health self-assessment test result: PASSED
- 23
- 24 General SMART Values:
- 25 Offline data collection status: (0x00) Offline data collection activity
- 26 was never started.
- 27 Auto Offline Data Collection: Disabled.
- 28 Self-test execution status: ( 118) The previous self-test completed having
- 29 the read element of the test failed.
- 30 Total time to complete Offline
- 31 data collection: (13080) seconds.
- 32 Offline data collection
- 33 capabilities: (0x5b) SMART execute Offline immediate.
- 34 Auto Offline data collection on/off support.
- 35 Suspend Offline collection upon new
- 36 command.
- 37 Offline surface scan supported.
- 38 Self-test supported.
- 39 No Conveyance Self-test supported.
- 40 Selective Self-test supported.
- 41 SMART capabilities: (0x0003) Saves SMART data before entering
- 42 power-saving mode.
- 43 Supports SMART auto save timer.
- 44 Error logging capability: (0x01) Error logging supported.
- 45 General Purpose Logging supported.
- 46 Short self-test routine
- 48 Extended self-test routine
- 50 SCT capabilities: (0x003f) SCT Status supported.
- 51 SCT Error Recovery Control supported.
- 52 SCT Feature Control supported.
- 53 SCT Data Table supported.
- 54
- 55 SMART Attributes Data Structure revision number: 16
- 56 Vendor Specific SMART Attributes with Thresholds:
- 57 ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 58 1 Raw_Read_Error_Rate 0x002f 100 100 051 Pre-fail Always - 174
- 59 2 Throughput_Performance 0x0026 055 054 000 Old_age Always - 11966
- 60 3 Spin_Up_Time 0x0023 089 089 025 Pre-fail Always - 3466
- 61 4 Start_Stop_Count 0x0032 078 078 000 Old_age Always - 22883
- 62 5 Reallocated_Sector_Ct 0x0033 252 252 010 Pre-fail Always - 0
- 63 7 Seek_Error_Rate 0x002e 252 252 051 Old_age Always - 0
- 64 8 Seek_Time_Performance 0x0024 252 252 015 Old_age Offline - 0
- 65 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 23576
- 66 10 Spin_Retry_Count 0x0032 252 252 051 Old_age Always - 0
- 67 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 62
- 68 12 Power_Cycle_Count 0x0032 098 098 000 Old_age Always - 2453
- 69 191 G-Sense_Error_Rate 0x0022 100 100 000 Old_age Always - 467
- 70 192 Power-Off_Retract_Count 0x0022 252 252 000 Old_age Always - 0
- 72 195 Hardware_ECC_Recovered 0x003a 100 100 000 Old_age Always - 0
- 73 196 Reallocated_Event_Count 0x0032 252 252 000 Old_age Always - 0
- 74 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 24
- 75 198 Offline_Uncorrectable 0x0030 252 252 000 Old_age Offline - 0
- 76 199 UDMA_CRC_Error_Count 0x0036 200 200 000 Old_age Always - 0
- 200 Multi_Zone_Error_Rate 0x002a 100 100 000 Old_age Always - 1303
- 78 223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 62
- 79 225 Load_Cycle_Count 0x0032 065 065 000 Old_age Always - 361877
- 80
- 82 No Errors Logged
- 83
- 85 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- 86 # 1 Extended offline Completed: read failure 60% 23539 976848632
- 87 # 2 Extended offline Completed: read failure 60% 23482 976848632
- 88 # 3 Extended offline Completed: read failure 60% 23431 976848632
- 89 # 4 Extended offline Completed: read failure 60% 23283 976848632
- 90 # 5 Extended offline Completed: read failure 60% 23206 976848632
- 91 # 6 Extended offline Interrupted (host reset) 90% 23157 -
- 92 # 7 Extended offline Completed: read failure 60% 23063 976848632
- 93 # 8 Extended offline Completed: read failure 60% 22963 976848632
- 94 # 9 Extended offline Completed: read failure 60% 22835 976848632
- 95 #10 Extended offline Completed: read failure 60% 22700 976848632
- 96 #11 Extended offline Completed: read failure 60% 22693 976848632
- 97 #12 Extended offline Completed: read failure 60% 22479 976848632
- 98 #13 Extended offline Completed: read failure 60% 22437 976848632
- 99 #14 Extended offline Completed: read failure 60% 22405 976848632
- 100 #15 Extended offline Completed: read failure 60% 22166 976848632
- 101 #16 Extended offline Completed without error 00% 22021 -
- 102 #17 Extended offline Completed without error 00% 21908 -
- 103 #18 Extended offline Completed without error 00% 21553 -
- 104 #19 Extended offline Completed without error 00% 21452 -
- 105 #20 Extended offline Completed without error 00% 21364 -
- 106 #21 Extended offline Completed without error 00% 21199 -
- 107
- 109 Note: revision number not 1 implies that no selective self-test has ever been run
- 110 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 111 1 0 0 Completed_read_failure [60% left] (0-65535)
- 112 2 0 0 Not_testing
- 113 3 0 0 Not_testing
- 114 4 0 0 Not_testing
- 115 5 0 0 Not_testing
- 116 Selective self-test flags (0x0):
- 117 After scanning selected spans, do NOT read-scan remainder of disk.
- 118 If Selective self-test is pending on power-up, resume after 0 minute delay.
Quellcode
Hier kannst du den Code kopieren und ihn in deinen bevorzugten Editor einfügen. PASTEBIN_DOWNLOAD_SNIPPET_EXPLAIN