NoPaste

PoempelPinguins apache2.conf

von PoempelPinguin

Dein Code:
  1. # This is the main Apache server configuration file.  It contains the
  2. # configuration directives that give the server its instructions.
  3. # See http://httpd.apache.org/docs/2.4/ for detailed information about
  4. # the directives and /usr/share/doc/apache2/README.Debian about Debian specific
  5. # hints.
  6. #
  7. #
  8. # Summary of how the Apache 2 configuration works in Debian:
  9. # The Apache 2 web server configuration in Debian is quite different to
  10. # upstream's suggested way to configure the web server. This is because Debian's
  11. # default Apache2 installation attempts to make adding and removing modules,
  12. # virtual hosts, and extra configuration directives as flexible as possible, in
  13. # order to make automating the changes and administering the server as easy as
  14. # possible.
  15.  
  16. # It is split into several files forming the configuration hierarchy outlined
  17. # below, all located in the /etc/apache2/ directory:
  18. #
  19. #       /etc/apache2/
  20. #       |-- apache2.conf
  21. #       |       `--  ports.conf
  22. #       |-- mods-enabled
  23. #       |       |-- *.load
  24. #       |       `-- *.conf
  25. #       |-- conf-enabled
  26. #       |       `-- *.conf
  27. #       `-- sites-enabled
  28. #               `-- *.conf
  29. #
  30. #
  31. # * apache2.conf is the main configuration file (this file). It puts the pieces
  32. #   together by including all remaining configuration files when starting up the
  33. #   web server.
  34. #
  35. # * ports.conf is always included from the main configuration file. It is
  36. #   supposed to determine listening ports for incoming connections which can be
  37. #   customized anytime.
  38. #
  39. # * Configuration files in the mods-enabled/, conf-enabled/ and sites-enabled/
  40. #   directories contain particular configuration snippets which manage modules,
  41. #   global configuration fragments, or virtual host configurations,
  42. #   respectively.
  43. #
  44. #   They are activated by symlinking available configuration files from their
  45. #   respective *-available/ counterparts. These should be managed by using our
  46. #   helpers a2enmod/a2dismod, a2ensite/a2dissite and a2enconf/a2disconf. See
  47. #   their respective man pages for detailed information.
  48. #
  49. # * The binary is called apache2. Due to the use of environment variables, in
  50. #   the default configuration, apache2 needs to be started/stopped with
  51. #   /etc/init.d/apache2 or apache2ctl. Calling /usr/bin/apache2 directly will not
  52. #   work with the default configuration.
  53.  
  54.  
  55. # Global configuration
  56. #
  57.  
  58. #
  59. # ServerRoot: The top of the directory tree under which the server's
  60. # configuration, error, and log files are kept.
  61. #
  62. # NOTE!  If you intend to place this on an NFS (or otherwise network)
  63. # mounted filesystem then please read the Mutex documentation (available
  64. # at <URL:http://httpd.apache.org/docs/2.4/mod/core.html#mutex>);
  65. # you will save yourself a lot of trouble.
  66. #
  67. # Do NOT add a slash at the end of the directory path.
  68. #
  69. #ServerRoot "/etc/apache2"
  70.  
  71. #
  72. # The accept serialization lock file MUST BE STORED ON A LOCAL DISK.
  73. #
  74. Mutex file:${APACHE_LOCK_DIR} default
  75.  
  76. #
  77. # PidFile: The file in which the server should record its process
  78. # identification number when it starts.
  79. # This needs to be set in /etc/apache2/envvars
  80. #
  81. PidFile ${APACHE_PID_FILE}
  82.  
  83. #
  84. # Timeout: The number of seconds before receives and sends time out.
  85. #
  86. Timeout 300
  87.  
  88. #
  89. # KeepAlive: Whether or not to allow persistent connections (more than
  90. # one request per connection). Set to "Off" to deactivate.
  91. #
  92. KeepAlive On
  93.  
  94. #
  95. # MaxKeepAliveRequests: The maximum number of requests to allow
  96. # during a persistent connection. Set to 0 to allow an unlimited amount.
  97. # We recommend you leave this number high, for maximum performance.
  98. #
  99. MaxKeepAliveRequests 100
  100.  
  101. #
  102. # KeepAliveTimeout: Number of seconds to wait for the next request from the
  103. # same client on the same connection.
  104. #
  105. KeepAliveTimeout 5
  106.  
  107.  
  108. # These need to be set in /etc/apache2/envvars
  109. User ${APACHE_RUN_USER}
  110. Group ${APACHE_RUN_GROUP}
  111.  
  112. #
  113. # HostnameLookups: Log the names of clients or just their IP addresses
  114. # e.g., www.apache.org (on) or 204.62.129.132 (off).
  115. # The default is off because it'd be overall better for the net if people
  116. # had to knowingly turn this feature on, since enabling it means that
  117. # each client request will result in AT LEAST one lookup request to the
  118. # nameserver.
  119. #
  120. HostnameLookups Off
  121.  
  122. # ErrorLog: The location of the error log file.
  123. # If you do not specify an ErrorLog directive within a <VirtualHost>
  124. # container, error messages relating to that virtual host will be
  125. # logged here.  If you *do* define an error logfile for a <VirtualHost>
  126. # container, that host's errors will be logged there and not here.
  127. #
  128. ErrorLog ${APACHE_LOG_DIR}/error.log
  129.  
  130. #
  131. # LogLevel: Control the severity of messages logged to the error_log.
  132. # Available values: trace8, ..., trace1, debug, info, notice, warn,
  133. # error, crit, alert, emerg.
  134. # It is also possible to configure the log level for particular modules, e.g.
  135. # "LogLevel info ssl:warn"
  136. #
  137. LogLevel warn
  138.  
  139. # Include module configuration:
  140. IncludeOptional mods-enabled/*.load
  141. IncludeOptional mods-enabled/*.conf
  142.  
  143. # Include list of ports to listen on
  144. Include ports.conf
  145.  
  146.  
  147. # Sets the default security model of the Apache2 HTTPD server. It does
  148. # not allow access to the root filesystem outside of /usr/share and /var/www.
  149. # The former is used by web applications packaged in Debian,
  150. # the latter may be used for local directories served by the web server. If
  151. # your system is serving content from a sub-directory in /srv you must allow
  152. # access here, or in any related virtual host.
  153. <Directory />
  154.         Options FollowSymLinks
  155.         AllowOverride None
  156.         Require all granted
  157. </Directory>
  158.  
  159. <Directory /usr/share>
  160.         AllowOverride None
  161.         Require all granted
  162. </Directory>
  163.  
  164. <Directory /var/www/>
  165.         Options Indexes FollowSymLinks
  166.         AllowOverride None
  167.         Require all granted
  168. </Directory>
  169.  
  170. <Directory "/home/workspace/openproject-ce/public/">
  171.    Order allow,deny
  172.    Allow from all
  173.    # New directive needed in Apache 2.4.3:
  174.    Require all granted
  175. </Directory>
  176.  
  177.  
  178. #<Directory /var/www/>
  179. #       Options Indexes FollowSymLinks
  180. #       AllowOverride None
  181. #       Require all granted
  182. #</Directory>
  183.  
  184.  
  185.  
  186.  
  187. # AccessFileName: The name of the file to look for in each directory
  188. # for additional configuration directives.  See also the AllowOverride
  189. # directive.
  190. #
  191. AccessFileName .htaccess
  192.  
  193. #
  194. # The following lines prevent .htaccess and .htpasswd files from being
  195. # viewed by Web clients.
  196. #
  197. <FilesMatch "^\.ht">
  198.         Require all denied
  199. </FilesMatch>
  200.  
  201.  
  202. #
  203. # The following directives define some format nicknames for use with
  204. # a CustomLog directive.
  205. #
  206. # These deviate from the Common Log Format definitions in that they use %O
  207. # (the actual bytes sent including headers) instead of %b (the size of the
  208. # requested file), because the latter makes it impossible to detect partial
  209. # requests.
  210. #
  211. # Note that the use of %{X-Forwarded-For}i instead of %h is not recommended.
  212. # Use mod_remoteip instead.
  213. #
  214. LogFormat "%v:%p %h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" vhost_combined
  215. LogFormat "%h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" combined
  216. LogFormat "%h %l %u %t \"%r\" %>s %O" common
  217. LogFormat "%{Referer}i -> %U" referer
  218. LogFormat "%{User-agent}i" agent
  219.  
  220. # Include of directories ignores editors' and dpkg's backup files,
  221. # see README.Debian for details.
  222.  
  223. # Include generic snippets of statements
  224. IncludeOptional conf-enabled/*.conf
  225.  
  226. # Include the virtual host configurations:
  227. IncludeOptional sites-enabled/*.conf
  228.  
  229. # Passenger Module
  230.  
  231. # LoadModule passenger_module /home/workspace/.rbenv/versions/2.3.1/lib/ruby/gems/2.3.0/gems/passenger-5.0.30/buildout/apache2/mod_passenger.so
  232.  
  233. # vim: syntax=apache ts=4 sw=4 sts=4 sr noet

Quellcode

Hier kannst du den Code kopieren und ihn in deinen bevorzugten Editor einfügen. Alternativ kannst du den gesamten Eintrag auch als Datei herunterladen.