NoPaste

sdc

von unix1988
Beschreibung:
platte1
Snippet erstellt:
07.05.2018 21:17:00
Snippet wird automatisch gelöscht:
Niemals

Dein Code:
  1. smartctl -a /dev/sdc                                                                                                                                                            :(
  2. smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.16.0-1-amd64] (local build)
  3. Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
  4.  
  5. === START OF INFORMATION SECTION ===
  6. Model Family:     Toshiba 3.5" DT01ACA... Desktop HDD
  7. Device Model:     TOSHIBA DT01ACA300
  8. Serial Number:    27A07BHAS
  9. LU WWN Device Id: 5 000039 fe6ce332c
  10. Firmware Version: MX6OABB0
  11. User Capacity:    3.000.592.982.016 bytes [3,00 TB]
  12. Sector Sizes:     512 bytes logical, 4096 bytes physical
  13. Rotation Rate:    7200 rpm
  14. Form Factor:      3.5 inches
  15. Device is:        In smartctl database [for details use: -P show]
  16. ATA Version is:   ATA8-ACS T13/1699-D revision 4
  17. SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
  18. Local Time is:    Mon May  7 21:16:26 2018 CEST
  19. SMART support is: Available - device has SMART capability.
  20. SMART support is: Enabled
  21.  
  22. === START OF READ SMART DATA SECTION ===
  23. SMART overall-health self-assessment test result: PASSED
  24.  
  25. General SMART Values:
  26. Offline data collection status:  (0x80) Offline data collection activity
  27.                                        was never started.
  28.                                        Auto Offline Data Collection: Enabled.
  29. Self-test execution status:      (   0) The previous self-test routine completed
  30.                                        without error or no self-test has ever
  31.                                        been run.
  32. Total time to complete Offline
  33. data collection:                (21504) seconds.
  34. Offline data collection
  35. capabilities:                    (0x5b) SMART execute Offline immediate.
  36.                                        Auto Offline data collection on/off support.
  37.                                        Suspend Offline collection upon new
  38.                                        command.
  39.                                        Offline surface scan supported.
  40.                                        Self-test supported.
  41.                                        No Conveyance Self-test supported.
  42.                                        Selective Self-test supported.
  43. SMART capabilities:            (0x0003) Saves SMART data before entering
  44.                                        power-saving mode.
  45.                                        Supports SMART auto save timer.
  46. Error logging capability:        (0x01) Error logging supported.
  47.                                        General Purpose Logging supported.
  48. Short self-test routine
  49. recommended polling time:        (   1) minutes.
  50. Extended self-test routine
  51. recommended polling time:        ( 359) minutes.
  52. SCT capabilities:              (0x003d) SCT Status supported.
  53.                                        SCT Error Recovery Control supported.
  54.                                        SCT Feature Control supported.
  55.                                        SCT Data Table supported.
  56.  
  57. SMART Attributes Data Structure revision number: 16
  58. Vendor Specific SMART Attributes with Thresholds:
  59. ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  60.  1 Raw_Read_Error_Rate     0x000b   100   100   016    Pre-fail  Always       -       0
  61.  2 Throughput_Performance  0x0005   141   141   054    Pre-fail  Offline      -       66
  62.  3 Spin_Up_Time            0x0007   137   137   024    Pre-fail  Always       -       393 (Average 442)
  63.  4 Start_Stop_Count        0x0012   100   100   000    Old_age   Always       -       639
  64.  5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail  Always       -       0
  65.  7 Seek_Error_Rate         0x000b   100   100   067    Pre-fail  Always       -       0
  66.  8 Seek_Time_Performance   0x0005   124   124   020    Pre-fail  Offline      -       33
  67.  9 Power_On_Hours          0x0012   100   100   000    Old_age   Always       -       3418
  68. 10 Spin_Retry_Count        0x0013   100   100   060    Pre-fail  Always       -       0
  69. 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       636
  70. 192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       666
  71. 193 Load_Cycle_Count        0x0012   100   100   000    Old_age   Always       -       666
  72. 194 Temperature_Celsius     0x0002   146   146   000    Old_age   Always       -       41 (Min/Max 15/57)
  73. 196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0
  74. 197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       0
  75. 198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -       0
  76. 199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       -       0
  77.  
  78. SMART Error Log Version: 1
  79. ATA Error Count: 1
  80.        CR = Command Register [HEX]
  81.        FR = Features Register [HEX]
  82.        SC = Sector Count Register [HEX]
  83.        SN = Sector Number Register [HEX]
  84.        CL = Cylinder Low Register [HEX]
  85.        CH = Cylinder High Register [HEX]
  86.        DH = Device/Head Register [HEX]
  87.        DC = Device Command Register [HEX]
  88.        ER = Error register [HEX]
  89.        ST = Status register [HEX]
  90. Powered_Up_Time is measured from power on, and printed as
  91. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  92. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  93.  
  94. Error 1 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
  95.  When the command that caused the error occurred, the device was active or idle.
  96.  
  97.  After command completion occurred, registers were:
  98.  ER ST SC SN CL CH DH
  99.  -- -- -- -- -- -- --
  100.  84 51 0f d9 96 92 01  Error: ICRC, ABRT at LBA = 0x019296d9 = 26384089
  101.  
  102.  Commands leading to the command that caused the error were:
  103.  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  104.  -- -- -- -- -- -- -- --  ----------------  --------------------
  105.  61 40 90 a8 29 93 40 08      00:07:03.052  WRITE FPDMA QUEUED
  106.  61 40 88 68 24 93 40 08      00:07:03.051  WRITE FPDMA QUEUED
  107.  61 40 80 28 1f 93 40 08      00:07:03.048  WRITE FPDMA QUEUED
  108.  61 40 78 e8 19 93 40 08      00:07:03.048  WRITE FPDMA QUEUED
  109.  61 40 70 a8 14 93 40 08      00:07:03.048  WRITE FPDMA QUEUED
  110.  
  111. SMART Self-test log structure revision number 1
  112. Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
  113. # 1  Short offline       Completed without error       00%      3418         -
  114. # 2  Extended offline    Completed without error       00%      3369         -
  115. # 3  Extended offline    Completed without error       00%      3257         -
  116. # 4  Extended offline    Completed without error       00%      3208         -
  117. # 5  Extended offline    Completed without error       00%      3137         -
  118. # 6  Extended offline    Completed without error       00%      2898         -
  119. # 7  Extended offline    Completed without error       00%      2655         -
  120. # 8  Extended offline    Completed without error       00%      2608         -
  121. # 9  Extended offline    Completed without error       00%      2548         -
  122. #10  Extended offline    Completed without error       00%      2408         -
  123. #11  Extended offline    Completed without error       00%      2345         -
  124. #12  Extended offline    Completed without error       00%      2324         -
  125. #13  Extended offline    Completed without error       00%      2231         -
  126. #14  Extended offline    Completed without error       00%      2207         -
  127. #15  Extended offline    Completed without error       00%      2167         -
  128. #16  Extended offline    Completed without error       00%      2149         -
  129. #17  Extended offline    Interrupted (host reset)      30%      1862         -
  130. #18  Extended offline    Completed without error       00%      1811         -
  131. #19  Extended offline    Completed without error       00%      1496         -
  132. #20  Extended offline    Completed without error       00%      1070         -
  133. #21  Extended offline    Completed without error       00%       914         -
  134.  
  135. SMART Selective self-test log data structure revision number 1
  136. SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
  137.    1        0        0  Not_testing
  138.    2        0        0  Not_testing
  139.    3        0        0  Not_testing
  140.    4        0        0  Not_testing
  141.    5        0        0  Not_testing
  142. Selective self-test flags (0x0):
  143.  After scanning selected spans, do NOT read-scan remainder of disk.
  144. If Selective self-test is pending on power-up, resume after 0 minute delay.

Quellcode

Hier kannst du den Code kopieren und ihn in deinen bevorzugten Editor einfügen. Alternativ kannst du den gesamten Eintrag auch als Datei herunterladen.