sdc
von unix1988- SNIPPET_DESC:
- platte1
- SNIPPET_CREATION_TIME:
- 07.05.2018 21:17:00
- SNIPPET_PRUNE_TIME:
- Unendlich
- SNIPPET_TEXT:
-
- smartctl -a /dev/sdc :(
- smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.16.0-1-amd64] (local build)
- Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Model Family: Toshiba 3.5" DT01ACA... Desktop HDD
- Device Model: TOSHIBA DT01ACA300
- Serial Number: 27A07BHAS
- LU WWN Device Id: 5 000039 fe6ce332c
- Firmware Version: MX6OABB0
- User Capacity: 3.000.592.982.016 bytes [3,00 TB]
- Sector Sizes: 512 bytes logical, 4096 bytes physical
- Rotation Rate: 7200 rpm
- Form Factor: 3.5 inches
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: ATA8-ACS T13/1699-D revision 4
- SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
- Local Time is: Mon May 7 21:16:26 2018 CEST
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x80) Offline data collection activity
- was never started.
- Auto Offline Data Collection: Enabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: (21504) seconds.
- Offline data collection
- capabilities: (0x5b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- No Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 1) minutes.
- Extended self-test routine
- recommended polling time: ( 359) minutes.
- SCT capabilities: (0x003d) SCT Status supported.
- SCT Error Recovery Control supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0
- 2 Throughput_Performance 0x0005 141 141 054 Pre-fail Offline - 66
- 3 Spin_Up_Time 0x0007 137 137 024 Pre-fail Always - 393 (Average 442)
- 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 639
- 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
- 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
- 8 Seek_Time_Performance 0x0005 124 124 020 Pre-fail Offline - 33
- 9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 3418
- 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
- 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 636
- 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 666
- 193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 666
- 194 Temperature_Celsius 0x0002 146 146 000 Old_age Always - 41 (Min/Max 15/57)
- 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
- 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
- 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
- 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0
- SMART Error Log Version: 1
- ATA Error Count: 1
- CR = Command Register [HEX]
- FR = Features Register [HEX]
- SC = Sector Count Register [HEX]
- SN = Sector Number Register [HEX]
- CL = Cylinder Low Register [HEX]
- CH = Cylinder High Register [HEX]
- DH = Device/Head Register [HEX]
- DC = Device Command Register [HEX]
- ER = Error register [HEX]
- ST = Status register [HEX]
- Powered_Up_Time is measured from power on, and printed as
- DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
- SS=sec, and sss=millisec. It "wraps" after 49.710 days.
- Error 1 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 84 51 0f d9 96 92 01 Error: ICRC, ABRT at LBA = 0x019296d9 = 26384089
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 61 40 90 a8 29 93 40 08 00:07:03.052 WRITE FPDMA QUEUED
- 61 40 88 68 24 93 40 08 00:07:03.051 WRITE FPDMA QUEUED
- 61 40 80 28 1f 93 40 08 00:07:03.048 WRITE FPDMA QUEUED
- 61 40 78 e8 19 93 40 08 00:07:03.048 WRITE FPDMA QUEUED
- 61 40 70 a8 14 93 40 08 00:07:03.048 WRITE FPDMA QUEUED
- SMART Self-test log structure revision number 1
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Short offline Completed without error 00% 3418 -
- # 2 Extended offline Completed without error 00% 3369 -
- # 3 Extended offline Completed without error 00% 3257 -
- # 4 Extended offline Completed without error 00% 3208 -
- # 5 Extended offline Completed without error 00% 3137 -
- # 6 Extended offline Completed without error 00% 2898 -
- # 7 Extended offline Completed without error 00% 2655 -
- # 8 Extended offline Completed without error 00% 2608 -
- # 9 Extended offline Completed without error 00% 2548 -
- #10 Extended offline Completed without error 00% 2408 -
- #11 Extended offline Completed without error 00% 2345 -
- #12 Extended offline Completed without error 00% 2324 -
- #13 Extended offline Completed without error 00% 2231 -
- #14 Extended offline Completed without error 00% 2207 -
- #15 Extended offline Completed without error 00% 2167 -
- #16 Extended offline Completed without error 00% 2149 -
- #17 Extended offline Interrupted (host reset) 30% 1862 -
- #18 Extended offline Completed without error 00% 1811 -
- #19 Extended offline Completed without error 00% 1496 -
- #20 Extended offline Completed without error 00% 1070 -
- #21 Extended offline Completed without error 00% 914 -
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
Quellcode
Hier kannst du den Code kopieren und ihn in deinen bevorzugten Editor einfügen. PASTEBIN_DOWNLOAD_SNIPPET_EXPLAIN