smartctl_output
von TuxPeter- SNIPPET_DESC:
- Kein Fehler oder doch?
- SNIPPET_CREATION_TIME:
- 08.05.2018 13:06:37
- SNIPPET_PRUNE_TIME:
- Unendlich
- SNIPPET_TEXT:
-
- root@deb1:~# smartctl -a /dev/sda
- smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.9.0-6-amd64] (local build)
- Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Device Model: Intenso SSD Sata III
- Serial Number: AA000000000000005035
- Firmware Version: N1126K
- User Capacity: 126.701.535.232 bytes [126 GB]
- Sector Size: 512 bytes logical/physical
- Rotation Rate: Solid State Device
- Device is: Not in smartctl database [for details use: -P showall]
- ATA Version is: ACS-2 (minor revision not indicated)
- SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
- Local Time is: Tue May 8 13:00:42 2018 CEST
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x02) Offline data collection activity
- was completed without error.
- Auto Offline Data Collection: Disabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: ( 57) seconds.
- Offline data collection
- capabilities: (0x71) SMART execute Offline immediate.
- No Auto Offline data collection support.
- Suspend Offline collection upon new
- command.
- No Offline surface scan supported.
- Self-test supported.
- Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0002) Does not save SMART data before
- entering power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 1) minutes.
- Extended self-test routine
- recommended polling time: ( 1) minutes.
- Conveyance self-test routine
- recommended polling time: ( 1) minutes.
- SMART Attributes Data Structure revision number: 1
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 1 Raw_Read_Error_Rate 0x0000 100 100 000 Old_age Offline - 0
- 5 Reallocated_Sector_Ct 0x0000 100 100 000 Old_age Offline - 0
- 9 Power_On_Hours 0x0000 100 100 000 Old_age Offline - 532
- 12 Power_Cycle_Count 0x0000 100 100 000 Old_age Offline - 4163
- 160 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 0
- 161 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 118
- 163 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 53
- 164 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 77850
- 165 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 113
- 166 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 4
- 167 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 38
- 168 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 3000
- 169 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 99
- 175 Program_Fail_Count_Chip 0x0000 100 100 000 Old_age Offline - 0
- 176 Erase_Fail_Count_Chip 0x0000 100 100 000 Old_age Offline - 0
- 177 Wear_Leveling_Count 0x0000 100 100 050 Old_age Offline - 32
- 178 Used_Rsvd_Blk_Cnt_Chip 0x0000 100 100 000 Old_age Offline - 0
- 181 Program_Fail_Cnt_Total 0x0000 100 100 000 Old_age Offline - 0
- 182 Erase_Fail_Count_Total 0x0000 100 100 000 Old_age Offline - 0
- 192 Power-Off_Retract_Count 0x0000 100 100 000 Old_age Offline - 149
- 194 Temperature_Celsius 0x0000 100 100 000 Old_age Offline - 35
- 195 Hardware_ECC_Recovered 0x0000 100 100 000 Old_age Offline - 3568
- 196 Reallocated_Event_Count 0x0000 100 100 016 Old_age Offline - 0
- 197 Current_Pending_Sector 0x0000 100 100 000 Old_age Offline - 0
- 198 Offline_Uncorrectable 0x0000 100 100 000 Old_age Offline - 0
- 199 UDMA_CRC_Error_Count 0x0000 100 100 050 Old_age Offline - 29
- 232 Available_Reservd_Space 0x0000 100 100 000 Old_age Offline - 100
- 241 Total_LBAs_Written 0x0000 100 100 000 Old_age Offline - 65902
- 242 Total_LBAs_Read 0x0000 100 100 000 Old_age Offline - 129442
- 245 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 155700
- SMART Error Log Version: 1
- No Errors Logged
- SMART Self-test log structure revision number 1
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Short offline Completed without error 00% 19 -
- # 2 Abort offline test Completed without error 00% 14 -
- # 3 Short offline Self-test routine in progress 70% 14 -
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- 7 0 65535 Read_scanning was completed without error
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
- root@deb1:~#
Quellcode
Hier kannst du den Code kopieren und ihn in deinen bevorzugten Editor einfügen. PASTEBIN_DOWNLOAD_SNIPPET_EXPLAIN