NoPaste

smartctl-sdd

von halo44

Dein Code:
  1. smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.9.0-8-amd64] (local build)
  2. Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
  3.  
  4. === START OF INFORMATION SECTION ===
  5. Model Family:     Toshiba 2.5" HDD MQ01ABF...
  6. Device Model:     TOSHIBA MQ01ABF050
  7. Serial Number:    X5BTC6EGT
  8. LU WWN Device Id: 5 000039 694102186
  9. Firmware Version: AM001U
  10. User Capacity:    500.107.862.016 bytes [500 GB]
  11. Sector Sizes:     512 bytes logical, 4096 bytes physical
  12. Rotation Rate:    5400 rpm
  13. Form Factor:      2.5 inches
  14. Device is:        In smartctl database [for details use: -P show]
  15. ATA Version is:   ATA8-ACS (minor revision not indicated)
  16. SATA Version is:  SATA 2.6, 3.0 Gb/s (current: 3.0 Gb/s)
  17. Local Time is:    Thu Sep 13 09:07:44 2018 CEST
  18. SMART support is: Available - device has SMART capability.
  19. SMART support is: Enabled
  20.  
  21. === START OF READ SMART DATA SECTION ===
  22. SMART Status not supported: Incomplete response, ATA output registers missing
  23. SMART overall-health self-assessment test result: PASSED
  24. Warning: This result is based on an Attribute check.
  25.  
  26. General SMART Values:
  27. Offline data collection status:  (0x82) Offline data collection activity
  28.                                         was completed without error.
  29.                                         Auto Offline Data Collection: Enabled.
  30. Self-test execution status:      (   0) The previous self-test routine completed
  31.                                         without error or no self-test has ever
  32.                                         been run.
  33. Total time to complete Offline
  34. data collection:                (  120) seconds.
  35. Offline data collection
  36. capabilities:                    (0x5b) SMART execute Offline immediate.
  37.                                         Auto Offline data collection on/off support.
  38.                                         Suspend Offline collection upon new
  39.                                         command.
  40.                                         Offline surface scan supported.
  41.                                         Self-test supported.
  42.                                         No Conveyance Self-test supported.
  43.                                         Selective Self-test supported.
  44. SMART capabilities:            (0x0003) Saves SMART data before entering
  45.                                         power-saving mode.
  46.                                         Supports SMART auto save timer.
  47. Error logging capability:        (0x01) Error logging supported.
  48.                                         General Purpose Logging supported.
  49. Short self-test routine
  50. recommended polling time:        (   2) minutes.
  51. Extended self-test routine
  52. recommended polling time:        ( 118) minutes.
  53. SCT capabilities:              (0x003d) SCT Status supported.
  54.                                         SCT Error Recovery Control supported.
  55.                                         SCT Feature Control supported.
  56.                                         SCT Data Table supported.
  57.  
  58. SMART Attributes Data Structure revision number: 16
  59. Vendor Specific SMART Attributes with Thresholds:
  60. ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  61.   1 Raw_Read_Error_Rate     0x000b   100   100   050    Pre-fail  Always       -       0
  62.   2 Throughput_Performance  0x0005   100   100   050    Pre-fail  Offline      -       0
  63.   3 Spin_Up_Time            0x0027   100   100   001    Pre-fail  Always       -       1997
  64.   4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       1405
  65.   5 Reallocated_Sector_Ct   0x0033   100   100   050    Pre-fail  Always       -       0
  66.   7 Seek_Error_Rate         0x000b   100   100   050    Pre-fail  Always       -       0
  67.   8 Seek_Time_Performance   0x0005   100   100   050    Pre-fail  Offline      -       0
  68.   9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       220
  69.  10 Spin_Retry_Count        0x0033   128   100   030    Pre-fail  Always       -       0
  70.  12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       799
  71. 191 G-Sense_Error_Rate      0x0032   100   100   000    Old_age   Always       -       4
  72. 192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       270
  73. 193 Load_Cycle_Count        0x0032   100   100   000    Old_age   Always       -       2721
  74. 194 Temperature_Celsius     0x0022   100   100   000    Old_age   Always       -       21 (Min/Max 14/47)
  75. 196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0
  76. 197 Current_Pending_Sector  0x0032   100   100   000    Old_age   Always       -       0
  77. 198 Offline_Uncorrectable   0x0030   100   100   000    Old_age   Offline      -       0
  78. 199 UDMA_CRC_Error_Count    0x0032   200   253   000    Old_age   Always       -       3
  79. 220 Disk_Shift              0x0002   100   100   000    Old_age   Always       -       0
  80. 222 Loaded_Hours            0x0032   100   100   000    Old_age   Always       -       85
  81. 223 Load_Retry_Count        0x0032   100   100   000    Old_age   Always       -       0
  82. 224 Load_Friction           0x0022   100   100   000    Old_age   Always       -       0
  83. 226 Load-in_Time            0x0026   100   100   000    Old_age   Always       -       187
  84. 240 Head_Flying_Hours       0x0001   100   100   001    Pre-fail  Offline      -       0
  85.  
  86. SMART Error Log Version: 1
  87. ATA Error Count: 3
  88.         CR = Command Register [HEX]
  89.         FR = Features Register [HEX]
  90.         SC = Sector Count Register [HEX]
  91.         SN = Sector Number Register [HEX]
  92.         CL = Cylinder Low Register [HEX]
  93.         CH = Cylinder High Register [HEX]
  94.         DH = Device/Head Register [HEX]
  95.         DC = Device Command Register [HEX]
  96.         ER = Error register [HEX]
  97.         ST = Status register [HEX]
  98. Powered_Up_Time is measured from power on, and printed as
  99. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  100. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  101.  
  102. Error 3 occurred at disk power-on lifetime: 218 hours (9 days + 2 hours)
  103.   When the command that caused the error occurred, the device was active or idle.
  104.  
  105.   After command completion occurred, registers were:
  106.   ER ST SC SN CL CH DH
  107.   -- -- -- -- -- -- --
  108.   84 50 00 ff 43 44 40   at LBA = 0x004443ff = 4473855
  109.  
  110.   Commands leading to the command that caused the error were:
  111.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  112.   -- -- -- -- -- -- -- --  ----------------  --------------------
  113.   35 ff a0 60 3d 44 40 00      00:00:38.851  WRITE DMA EXT
  114.   aa aa aa aa aa aa aa ff      00:00:38.388  [RESERVED]
  115.   35 00 a0 60 3d 44 40 00      00:00:38.154  WRITE DMA EXT
  116.   35 00 a0 c0 35 44 40 00      00:00:38.143  WRITE DMA EXT
  117.   35 00 d8 e8 2e 44 40 00      00:00:38.073  WRITE DMA EXT
  118.  
  119. Error 2 occurred at disk power-on lifetime: 208 hours (8 days + 16 hours)
  120.   When the command that caused the error occurred, the device was active or idle.
  121.  
  122.   After command completion occurred, registers were:
  123.   ER ST SC SN CL CH DH
  124.   -- -- -- -- -- -- --
  125.   84 51 00 7f 7f a5 40  Error: ICRC, ABRT at LBA = 0x00a57f7f = 10846079
  126.  
  127.   Commands leading to the command that caused the error were:
  128.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  129.   -- -- -- -- -- -- -- --  ----------------  --------------------
  130.   35 00 f0 90 7e a5 40 00      00:29:19.997  WRITE DMA EXT
  131.   35 00 f0 a0 7d a5 40 00      00:29:19.882  WRITE DMA EXT
  132.   35 00 f0 b0 7c a5 40 00      00:29:19.767  WRITE DMA EXT
  133.   35 00 f0 c0 7b a5 40 00      00:29:19.652  WRITE DMA EXT
  134.   35 00 f0 d0 7a a5 40 00      00:29:19.537  WRITE DMA EXT
  135.  
  136. Error 1 occurred at disk power-on lifetime: 183 hours (7 days + 15 hours)
  137.   When the command that caused the error occurred, the device was active or idle.
  138.  
  139.   After command completion occurred, registers were:
  140.   ER ST SC SN CL CH DH
  141.   -- -- -- -- -- -- --
  142.   84 50 00 f7 48 ac 40   at LBA = 0x00ac48f7 = 11290871
  143.  
  144.   Commands leading to the command that caused the error were:
  145.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  146.   -- -- -- -- -- -- -- --  ----------------  --------------------
  147.   35 00 f0 08 48 ac 40 00      00:48:16.551  WRITE DMA EXT
  148.   35 00 f0 e0 71 c5 40 00      00:48:16.436  WRITE DMA EXT
  149.   35 00 f0 f0 70 c5 40 00      00:48:16.321  WRITE DMA EXT
  150.   35 00 f0 00 70 c5 40 00      00:48:16.206  WRITE DMA EXT
  151.   35 00 80 80 6f c5 40 00      00:48:16.142  WRITE DMA EXT
  152.  
  153. SMART Self-test log structure revision number 1
  154. No self-tests have been logged.  [To run self-tests, use: smartctl -t]
  155.  
  156. SMART Selective self-test log data structure revision number 1
  157.  SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
  158.     1        0        0  Not_testing
  159.     2        0        0  Not_testing
  160.     3        0        0  Not_testing
  161.     4        0        0  Not_testing
  162.     5        0        0  Not_testing
  163. Selective self-test flags (0x0):
  164.   After scanning selected spans, do NOT read-scan remainder of disk.
  165. If Selective self-test is pending on power-up, resume after 0 minute delay.

Quellcode

Hier kannst du den Code kopieren und ihn in deinen bevorzugten Editor einfügen. Alternativ kannst du den gesamten Eintrag auch als Datei herunterladen.