NoPaste

dmesg@SD-Card Prob

von LDR
Beschreibung:
dmesg
Snippet erstellt:
06.12.2018 15:22:26
Snippet wird automatisch gelöscht:
06.03.2019 15:22:26

Dein Code:
  1. [    0.000000] microcode: microcode updated early to revision 0x2d, date = 2018-02-07
  2. [    0.000000] Linux version 4.9.0-8-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1) ) #1 SMP Debian 4.9.110-3+deb9u6 (2018-10-08)
  3. [    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-8-amd64 root=UUID=19627cda-7136-4593-b47d-150f69100dde ro quiet
  4. [    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
  5. [    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
  6. [    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
  7. [    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
  8. [    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
  9. [    0.000000] e820: BIOS-provided physical RAM map:
  10. [    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009b3ff] usable
  11. [    0.000000] BIOS-e820: [mem 0x000000000009b400-0x000000000009ffff] reserved
  12. [    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
  13. [    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cec6ffff] usable
  14. [    0.000000] BIOS-e820: [mem 0x00000000cec70000-0x00000000cefb8fff] reserved
  15. [    0.000000] BIOS-e820: [mem 0x00000000cefb9000-0x00000000cf010fff] ACPI NVS
  16. [    0.000000] BIOS-e820: [mem 0x00000000cf011000-0x00000000cf59ffff] reserved
  17. [    0.000000] BIOS-e820: [mem 0x00000000cf5a0000-0x00000000cf5b0fff] ACPI NVS
  18. [    0.000000] BIOS-e820: [mem 0x00000000cf5b1000-0x00000000cf5c7fff] reserved
  19. [    0.000000] BIOS-e820: [mem 0x00000000cf5c8000-0x00000000cf5c9fff] usable
  20. [    0.000000] BIOS-e820: [mem 0x00000000cf5ca000-0x00000000cf5cafff] ACPI NVS
  21. [    0.000000] BIOS-e820: [mem 0x00000000cf5cb000-0x00000000cf5d2fff] reserved
  22. [    0.000000] BIOS-e820: [mem 0x00000000cf5d3000-0x00000000cf5dcfff] ACPI NVS
  23. [    0.000000] BIOS-e820: [mem 0x00000000cf5dd000-0x00000000cf638fff] reserved
  24. [    0.000000] BIOS-e820: [mem 0x00000000cf639000-0x00000000cf67bfff] ACPI NVS
  25. [    0.000000] BIOS-e820: [mem 0x00000000cf67c000-0x00000000cf7fffff] usable
  26. [    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
  27. [    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
  28. [    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000022f7fffff] usable
  29. [    0.000000] NX (Execute Disable) protection: active
  30. [    0.000000] SMBIOS 2.6 present.
  31. [    0.000000] DMI: System manufacturer System Product Name/SABERTOOTH P67, BIOS 2103 11/22/2011
  32. [    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
  33. [    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
  34. [    0.000000] e820: last_pfn = 0x22f800 max_arch_pfn = 0x400000000
  35. [    0.000000] MTRR default type: uncachable
  36. [    0.000000] MTRR fixed ranges enabled:
  37. [    0.000000]   00000-9FFFF write-back
  38. [    0.000000]   A0000-BFFFF uncachable
  39. [    0.000000]   C0000-D3FFF write-protect
  40. [    0.000000]   D4000-E7FFF uncachable
  41. [    0.000000]   E8000-FFFFF write-protect
  42. [    0.000000] MTRR variable ranges enabled:
  43. [    0.000000]   0 base 000000000 mask E00000000 write-back
  44. [    0.000000]   1 base 200000000 mask FC0000000 write-back
  45. [    0.000000]   2 base 0D0000000 mask FF0000000 uncachable
  46. [    0.000000]   3 base 0E0000000 mask FE0000000 uncachable
  47. [    0.000000]   4 base 22F800000 mask FFF800000 uncachable
  48. [    0.000000]   5 base 230000000 mask FF0000000 uncachable
  49. [    0.000000]   6 disabled
  50. [    0.000000]   7 disabled
  51. [    0.000000]   8 disabled
  52. [    0.000000]   9 disabled
  53. [    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
  54. [    0.000000] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
  55. [    0.000000] e820: last_pfn = 0xcf800 max_arch_pfn = 0x400000000
  56. [    0.000000] found SMP MP-table at [mem 0x000fce90-0x000fce9f] mapped at [ffff88f4400fce90]
  57. [    0.000000] Base memory trampoline at [ffff88f440095000] 95000 size 24576
  58. [    0.000000] BRK [0x8233a000, 0x8233afff] PGTABLE
  59. [    0.000000] BRK [0x8233b000, 0x8233bfff] PGTABLE
  60. [    0.000000] BRK [0x8233c000, 0x8233cfff] PGTABLE
  61. [    0.000000] BRK [0x8233d000, 0x8233dfff] PGTABLE
  62. [    0.000000] BRK [0x8233e000, 0x8233efff] PGTABLE
  63. [    0.000000] BRK [0x8233f000, 0x8233ffff] PGTABLE
  64. [    0.000000] BRK [0x82340000, 0x82340fff] PGTABLE
  65. [    0.000000] BRK [0x82341000, 0x82341fff] PGTABLE
  66. [    0.000000] BRK [0x82342000, 0x82342fff] PGTABLE
  67. [    0.000000] BRK [0x82343000, 0x82343fff] PGTABLE
  68. [    0.000000] BRK [0x82344000, 0x82344fff] PGTABLE
  69. [    0.000000] RAMDISK: [mem 0x35b2d000-0x36d8dfff]
  70. [    0.000000] ACPI: Early table checksum verification disabled
  71. [    0.000000] ACPI: RSDP 0x00000000000F0420 000024 (v02 ALASKA)
  72. [    0.000000] ACPI: XSDT 0x00000000CF008068 00004C (v01 ALASKA A M I    01072009 AMI  00010013)
  73. [    0.000000] ACPI: FACP 0x00000000CF0109A0 0000F4 (v04 ALASKA A M I    01072009 AMI  00010013)
  74. [    0.000000] ACPI: DSDT 0x00000000CF008140 00885A (v02 ALASKA A M I    00000000 INTL 20051117)
  75. [    0.000000] ACPI: FACS 0x00000000CF5D4F80 000040
  76. [    0.000000] ACPI: APIC 0x00000000CF010A98 000092 (v03 ALASKA A M I    01072009 AMI  00010013)
  77. [    0.000000] ACPI: SSDT 0x00000000CF010B30 0001D6 (v01 AMICPU PROC     00000001 MSFT 03000001)
  78. [    0.000000] ACPI: MCFG 0x00000000CF010D08 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
  79. [    0.000000] ACPI: HPET 0x00000000CF010D48 000038 (v01 ALASKA A M I    01072009 AMI. 00000004)
  80. [    0.000000] ACPI: Local APIC address 0xfee00000
  81. [    0.000000] No NUMA configuration found
  82. [    0.000000] Faking a node at [mem 0x0000000000000000-0x000000022f7fffff]
  83. [    0.000000] NODE_DATA(0) allocated [mem 0x22f7f7000-0x22f7fbfff]
  84. [    0.000000] Zone ranges:
  85. [    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
  86. [    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
  87. [    0.000000]   Normal   [mem 0x0000000100000000-0x000000022f7fffff]
  88. [    0.000000]   Device   empty
  89. [    0.000000] Movable zone start for each node
  90. [    0.000000] Early memory node ranges
  91. [    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009afff]
  92. [    0.000000]   node   0: [mem 0x0000000000100000-0x00000000cec6ffff]
  93. [    0.000000]   node   0: [mem 0x00000000cf5c8000-0x00000000cf5c9fff]
  94. [    0.000000]   node   0: [mem 0x00000000cf67c000-0x00000000cf7fffff]
  95. [    0.000000]   node   0: [mem 0x0000000100000000-0x000000022f7fffff]
  96. [    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000022f7fffff]
  97. [    0.000000] On node 0 totalpages: 2090384
  98. [    0.000000]   DMA zone: 64 pages used for memmap
  99. [    0.000000]   DMA zone: 21 pages reserved
  100. [    0.000000]   DMA zone: 3994 pages, LIFO batch:0
  101. [    0.000000]   DMA32 zone: 13176 pages used for memmap
  102. [    0.000000]   DMA32 zone: 843254 pages, LIFO batch:31
  103. [    0.000000]   Normal zone: 19424 pages used for memmap
  104. [    0.000000]   Normal zone: 1243136 pages, LIFO batch:31
  105. [    0.000000] ACPI: PM-Timer IO Port: 0x408
  106. [    0.000000] ACPI: Local APIC address 0xfee00000
  107. [    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
  108. [    0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
  109. [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
  110. [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
  111. [    0.000000] ACPI: IRQ0 used by override.
  112. [    0.000000] ACPI: IRQ9 used by override.
  113. [    0.000000] Using ACPI (MADT) for SMP configuration information
  114. [    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
  115. [    0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
  116. [    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
  117. [    0.000000] PM: Registered nosave memory: [mem 0x0009b000-0x0009bfff]
  118. [    0.000000] PM: Registered nosave memory: [mem 0x0009c000-0x0009ffff]
  119. [    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
  120. [    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
  121. [    0.000000] PM: Registered nosave memory: [mem 0xcec70000-0xcefb8fff]
  122. [    0.000000] PM: Registered nosave memory: [mem 0xcefb9000-0xcf010fff]
  123. [    0.000000] PM: Registered nosave memory: [mem 0xcf011000-0xcf59ffff]
  124. [    0.000000] PM: Registered nosave memory: [mem 0xcf5a0000-0xcf5b0fff]
  125. [    0.000000] PM: Registered nosave memory: [mem 0xcf5b1000-0xcf5c7fff]
  126. [    0.000000] PM: Registered nosave memory: [mem 0xcf5ca000-0xcf5cafff]
  127. [    0.000000] PM: Registered nosave memory: [mem 0xcf5cb000-0xcf5d2fff]
  128. [    0.000000] PM: Registered nosave memory: [mem 0xcf5d3000-0xcf5dcfff]
  129. [    0.000000] PM: Registered nosave memory: [mem 0xcf5dd000-0xcf638fff]
  130. [    0.000000] PM: Registered nosave memory: [mem 0xcf639000-0xcf67bfff]
  131. [    0.000000] PM: Registered nosave memory: [mem 0xcf800000-0xfed1bfff]
  132. [    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
  133. [    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfeffffff]
  134. [    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
  135. [    0.000000] e820: [mem 0xcf800000-0xfed1bfff] available for PCI devices
  136. [    0.000000] Booting paravirtualized kernel on bare hardware
  137. [    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
  138. [    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
  139. [    0.000000] percpu: Embedded 35 pages/cpu @ffff88f66f400000 s105304 r8192 d29864 u262144
  140. [    0.000000] pcpu-alloc: s105304 r8192 d29864 u262144 alloc=1*2097152
  141. [    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
  142. [    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 2057699
  143. [    0.000000] Policy zone: Normal
  144. [    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-8-amd64 root=UUID=19627cda-7136-4593-b47d-150f69100dde ro quiet
  145. [    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
  146. [    0.000000] Calgary: detecting Calgary via BIOS EBDA area
  147. [    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
  148. [    0.000000] Memory: 8128748K/8361536K available (6254K kernel code, 1159K rwdata, 2872K rodata, 1420K init, 688K bss, 232788K reserved, 0K cma-reserved)
  149. [    0.000000] Kernel/User page tables isolation: enabled
  150. [    0.000000] Hierarchical RCU implementation.
  151. [    0.000000]  Build-time adjustment of leaf fanout to 64.
  152. [    0.000000]  RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
  153. [    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
  154. [    0.000000] NR_IRQS:33024 nr_irqs:488 16
  155. [    0.000000] Console: colour VGA+ 80x25
  156. [    0.000000] console [tty0] enabled
  157. [    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
  158. [    0.000000] hpet clockevent registered
  159. [    0.000000] tsc: Fast TSC calibration using PIT
  160. [    0.000000] tsc: Detected 3511.391 MHz processor
  161. [    0.000020] Calibrating delay loop (skipped), value calculated using timer frequency.. 7022.78 BogoMIPS (lpj=14045564)
  162. [    0.000022] pid_max: default: 32768 minimum: 301
  163. [    0.000035] ACPI: Core revision 20160831
  164. [    0.003008] ACPI: 2 ACPI AML tables successfully acquired and loaded
  165. [    0.003043] Security Framework initialized
  166. [    0.003044] Yama: disabled by default; enable with sysctl kernel.yama.*
  167. [    0.003048] AppArmor: AppArmor disabled by boot time parameter
  168. [    0.003348] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
  169. [    0.004459] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
  170. [    0.004935] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
  171. [    0.004940] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
  172. [    0.005158] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
  173. [    0.005159] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
  174. [    0.005161] mce: CPU supports 9 MCE banks
  175. [    0.005167] CPU0: Thermal monitoring enabled (TM1)
  176. [    0.005176] process: using mwait in idle threads
  177. [    0.005178] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
  178. [    0.005179] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
  179. [    0.005180] Spectre V2 : Mitigation: Full generic retpoline
  180. [    0.005180] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
  181. [    0.005180] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
  182. [    0.005181] Spectre V2 : Enabling Restricted Speculation for firmware calls
  183. [    0.005181] Speculative Store Bypass: Vulnerable
  184. [    0.005528] Freeing SMP alternatives memory: 24K
  185. [    0.109092] ftrace: allocating 25284 entries in 99 pages
  186. [    0.125807] smpboot: Max logical packages: 2
  187. [    0.126208] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
  188. [    0.165893] TSC deadline timer enabled
  189. [    0.165895] smpboot: CPU0: Intel(R) Core(TM) i7-2700K CPU @ 3.50GHz (family: 0x6, model: 0x2a, stepping: 0x7)
  190. [    0.165898] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
  191. [    0.165916] ... version:                3
  192. [    0.165916] ... bit width:              48
  193. [    0.165916] ... generic registers:      4
  194. [    0.165917] ... value mask:             0000ffffffffffff
  195. [    0.165917] ... max period:             00007fffffffffff
  196. [    0.165918] ... fixed-purpose events:   3
  197. [    0.165918] ... event mask:             000000070000000f
  198. [    0.166381] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
  199. [    0.166459] x86: Booting SMP configuration:
  200. [    0.166460] .... node  #0, CPUs:      #1 #2 #3 #4 #5 #6 #7
  201. [    0.184315] x86: Booted up 1 node, 8 CPUs
  202. [    0.184317] smpboot: Total of 8 processors activated (56182.25 BogoMIPS)
  203. [    0.190269] devtmpfs: initialized
  204. [    0.190322] x86/mm: Memory block size: 128MB
  205. [    0.192691] PM: Registering ACPI NVS region [mem 0xcefb9000-0xcf010fff] (360448 bytes)
  206. [    0.192700] PM: Registering ACPI NVS region [mem 0xcf5a0000-0xcf5b0fff] (69632 bytes)
  207. [    0.192702] PM: Registering ACPI NVS region [mem 0xcf5ca000-0xcf5cafff] (4096 bytes)
  208. [    0.192703] PM: Registering ACPI NVS region [mem 0xcf5d3000-0xcf5dcfff] (40960 bytes)
  209. [    0.192704] PM: Registering ACPI NVS region [mem 0xcf639000-0xcf67bfff] (274432 bytes)
  210. [    0.192752] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  211. [    0.192762] futex hash table entries: 2048 (order: 5, 131072 bytes)
  212. [    0.192801] pinctrl core: initialized pinctrl subsystem
  213. [    0.192888] NET: Registered protocol family 16
  214. [    0.205964] cpuidle: using governor ladder
  215. [    0.221971] cpuidle: using governor menu
  216. [    0.222007] ACPI: bus type PCI registered
  217. [    0.222009] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
  218. [    0.222096] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
  219. [    0.222098] PCI: not using MMCONFIG
  220. [    0.222099] PCI: Using configuration type 1 for base access
  221. [    0.222137] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
  222. [    0.238120] HugeTLB registered 2 MB page size, pre-allocated 0 pages
  223. [    0.238300] ACPI: Added _OSI(Module Device)
  224. [    0.238300] ACPI: Added _OSI(Processor Device)
  225. [    0.238301] ACPI: Added _OSI(3.0 _SCP Extensions)
  226. [    0.238301] ACPI: Added _OSI(Processor Aggregator Device)
  227. [    0.238446] ACPI: Executed 1 blocks of module-level executable AML code
  228. [    0.240814] ACPI: Dynamic OEM Table Load:
  229. [    0.240818] ACPI: SSDT 0xFFFF88F66502D000 00079C (v01 AMI    IST      00000001 MSFT 03000001)
  230. [    0.241074] ACPI: Dynamic OEM Table Load:
  231. [    0.241076] ACPI: SSDT 0xFFFF88F665030000 00021C (v01 AMI    CST      00000001 MSFT 03000001)
  232. [    0.241768] ACPI : EC: EC started
  233. [    0.241768] ACPI : EC: interrupt blocked
  234. [    0.241773] ACPI: \_SB_.PCI0.SBRG.EC0_: Used as first EC
  235. [    0.241775] ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0x18, EC_CMD/EC_SC=0x66, EC_DATA=0x62
  236. [    0.241776] ACPI: \_SB_.PCI0.SBRG.EC0_: Used as boot DSDT EC to handle transactions
  237. [    0.241776] ACPI: Interpreter enabled
  238. [    0.241788] ACPI: (supports S0 S1 S3 S4 S5)
  239. [    0.241789] ACPI: Using IOAPIC for interrupt routing
  240. [    0.241811] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
  241. [    0.241854] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in ACPI motherboard resources
  242. [    0.241857] pmd_set_huge: Cannot satisfy [mem 0xe0000000-0xe0200000] with a huge-page mapping due to MTRR override.
  243. [    0.241937] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
  244. [    0.242216] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
  245. [    0.246251] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
  246. [    0.246254] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
  247. [    0.246360] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug]
  248. [    0.246457] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability]
  249. [    0.246463] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
  250. [    0.246533] acpi PNP0A08:00: ignoring host bridge window [mem 0x000c8000-0x000dffff window] (conflicts with Video ROM [mem 0x000c0000-0x000cffff])
  251. [    0.246660] PCI host bridge to bus 0000:00
  252. [    0.246662] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
  253. [    0.246663] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
  254. [    0.246664] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
  255. [    0.246665] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xffffffff window]
  256. [    0.246666] pci_bus 0000:00: root bus resource [bus 00-ff]
  257. [    0.246672] pci 0000:00:00.0: [8086:0100] type 00 class 0x060000
  258. [    0.246740] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
  259. [    0.246764] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
  260. [    0.246793] pci 0000:00:01.0: System wakeup disabled by ACPI
  261. [    0.246848] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
  262. [    0.246868] pci 0000:00:16.0: reg 0x10: [mem 0xfe729000-0xfe72900f 64bit]
  263. [    0.246936] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
  264. [    0.247000] pci 0000:00:19.0: [8086:1503] type 00 class 0x020000
  265. [    0.247014] pci 0000:00:19.0: reg 0x10: [mem 0xfe700000-0xfe71ffff]
  266. [    0.247022] pci 0000:00:19.0: reg 0x14: [mem 0xfe728000-0xfe728fff]
  267. [    0.247030] pci 0000:00:19.0: reg 0x18: [io  0xf040-0xf05f]
  268. [    0.247085] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
  269. [    0.247115] pci 0000:00:19.0: System wakeup disabled by ACPI
  270. [    0.247149] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
  271. [    0.247165] pci 0000:00:1a.0: reg 0x10: [mem 0xfe727000-0xfe7273ff]
  272. [    0.247243] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
  273. [    0.247275] pci 0000:00:1a.0: System wakeup disabled by ACPI
  274. [    0.247308] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
  275. [    0.247323] pci 0000:00:1b.0: reg 0x10: [mem 0xfe720000-0xfe723fff 64bit]
  276. [    0.247389] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
  277. [    0.247452] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
  278. [    0.247524] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
  279. [    0.247559] pci 0000:00:1c.0: System wakeup disabled by ACPI
  280. [    0.247592] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
  281. [    0.247663] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
  282. [    0.247700] pci 0000:00:1c.1: System wakeup disabled by ACPI
  283. [    0.247732] pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400
  284. [    0.247803] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
  285. [    0.247839] pci 0000:00:1c.2: System wakeup disabled by ACPI
  286. [    0.247871] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
  287. [    0.247942] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
  288. [    0.247979] pci 0000:00:1c.3: System wakeup disabled by ACPI
  289. [    0.248011] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
  290. [    0.248082] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
  291. [    0.248118] pci 0000:00:1c.4: System wakeup disabled by ACPI
  292. [    0.248151] pci 0000:00:1c.6: [8086:244e] type 01 class 0x060401
  293. [    0.248222] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
  294. [    0.248258] pci 0000:00:1c.6: System wakeup disabled by ACPI
  295. [    0.248291] pci 0000:00:1c.7: [8086:1c1e] type 01 class 0x060400
  296. [    0.248362] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
  297. [    0.248398] pci 0000:00:1c.7: System wakeup disabled by ACPI
  298. [    0.248430] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
  299. [    0.248447] pci 0000:00:1d.0: reg 0x10: [mem 0xfe726000-0xfe7263ff]
  300. [    0.248525] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
  301. [    0.248558] pci 0000:00:1d.0: System wakeup disabled by ACPI
  302. [    0.248591] pci 0000:00:1f.0: [8086:1c46] type 00 class 0x060100
  303. [    0.248741] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601
  304. [    0.248754] pci 0000:00:1f.2: reg 0x10: [io  0xf090-0xf097]
  305. [    0.248761] pci 0000:00:1f.2: reg 0x14: [io  0xf080-0xf083]
  306. [    0.248768] pci 0000:00:1f.2: reg 0x18: [io  0xf070-0xf077]
  307. [    0.248775] pci 0000:00:1f.2: reg 0x1c: [io  0xf060-0xf063]
  308. [    0.248782] pci 0000:00:1f.2: reg 0x20: [io  0xf020-0xf03f]
  309. [    0.248789] pci 0000:00:1f.2: reg 0x24: [mem 0xfe725000-0xfe7257ff]
  310. [    0.248826] pci 0000:00:1f.2: PME# supported from D3hot
  311. [    0.248882] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
  312. [    0.248896] pci 0000:00:1f.3: reg 0x10: [mem 0xfe724000-0xfe7240ff 64bit]
  313. [    0.248915] pci 0000:00:1f.3: reg 0x20: [io  0xf000-0xf01f]
  314. [    0.249007] pci 0000:01:00.0: [1002:6818] type 00 class 0x030000
  315. [    0.249017] pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
  316. [    0.249024] pci 0000:01:00.0: reg 0x18: [mem 0xfe600000-0xfe63ffff 64bit]
  317. [    0.249028] pci 0000:01:00.0: reg 0x20: [io  0xe000-0xe0ff]
  318. [    0.249037] pci 0000:01:00.0: reg 0x30: [mem 0xfe640000-0xfe65ffff pref]
  319. [    0.249071] pci 0000:01:00.0: supports D1 D2
  320. [    0.249072] pci 0000:01:00.0: PME# supported from D1 D2 D3hot
  321. [    0.249116] pci 0000:01:00.1: [1002:aab0] type 00 class 0x040300
  322. [    0.249126] pci 0000:01:00.1: reg 0x10: [mem 0xfe660000-0xfe663fff 64bit]
  323. [    0.249173] pci 0000:01:00.1: supports D1 D2
  324. [    0.261996] pci 0000:00:01.0: PCI bridge to [bus 01]
  325. [    0.262000] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
  326. [    0.262003] pci 0000:00:01.0:   bridge window [mem 0xfe600000-0xfe6fffff]
  327. [    0.262007] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
  328. [    0.262090] pci 0000:00:1c.0: PCI bridge to [bus 02]
  329. [    0.262156] pci 0000:03:00.0: [1033:0194] type 00 class 0x0c0330
  330. [    0.262185] pci 0000:03:00.0: reg 0x10: [mem 0xfe500000-0xfe501fff 64bit]
  331. [    0.262327] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
  332. [    0.278012] pci 0000:00:1c.1: PCI bridge to [bus 03]
  333. [    0.278022] pci 0000:00:1c.1:   bridge window [mem 0xfe500000-0xfe5fffff]
  334. [    0.278103] pci 0000:00:1c.2: PCI bridge to [bus 04]
  335. [    0.278182] pci 0000:05:00.0: [197b:2362] type 00 class 0x010185
  336. [    0.278220] pci 0000:05:00.0: reg 0x10: [io  0xd040-0xd047]
  337. [    0.278235] pci 0000:05:00.0: reg 0x14: [io  0xd030-0xd033]
  338. [    0.278250] pci 0000:05:00.0: reg 0x18: [io  0xd020-0xd027]
  339. [    0.278266] pci 0000:05:00.0: reg 0x1c: [io  0xd010-0xd013]
  340. [    0.278281] pci 0000:05:00.0: reg 0x20: [io  0xd000-0xd00f]
  341. [    0.278296] pci 0000:05:00.0: reg 0x24: [mem 0xfe410000-0xfe4101ff]
  342. [    0.278312] pci 0000:05:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
  343. [    0.278377] pci 0000:05:00.0: PME# supported from D3hot
  344. [    0.294018] pci 0000:00:1c.3: PCI bridge to [bus 05]
  345. [    0.294024] pci 0000:00:1c.3:   bridge window [io  0xd000-0xdfff]
  346. [    0.294029] pci 0000:00:1c.3:   bridge window [mem 0xfe400000-0xfe4fffff]
  347. [    0.294128] pci 0000:06:00.0: [1033:0194] type 00 class 0x0c0330
  348. [    0.294156] pci 0000:06:00.0: reg 0x10: [mem 0xfe300000-0xfe301fff 64bit]
  349. [    0.294297] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
  350. [    0.310027] pci 0000:00:1c.4: PCI bridge to [bus 06]
  351. [    0.310037] pci 0000:00:1c.4:   bridge window [mem 0xfe300000-0xfe3fffff]
  352. [    0.310136] pci 0000:07:00.0: [1b21:1080] type 01 class 0x060401
  353. [    0.310251] pci 0000:07:00.0: System wakeup disabled by ACPI
  354. [    0.310277] pci 0000:00:1c.6: PCI bridge to [bus 07-08] (subtractive decode)
  355. [    0.310280] pci 0000:00:1c.6:   bridge window [io  0xc000-0xcfff]
  356. [    0.310283] pci 0000:00:1c.6:   bridge window [mem 0xfe200000-0xfe2fffff]
  357. [    0.310289] pci 0000:00:1c.6:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
  358. [    0.310290] pci 0000:00:1c.6:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
  359. [    0.310291] pci 0000:00:1c.6:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
  360. [    0.310292] pci 0000:00:1c.6:   bridge window [mem 0xd0000000-0xffffffff window] (subtractive decode)
  361. [    0.310348] pci 0000:08:01.0: [1106:3044] type 00 class 0x0c0010
  362. [    0.310376] pci 0000:08:01.0: reg 0x10: [mem 0xfe200000-0xfe2007ff]
  363. [    0.310393] pci 0000:08:01.0: reg 0x14: [io  0xc000-0xc07f]
  364. [    0.310523] pci 0000:08:01.0: supports D2
  365. [    0.310524] pci 0000:08:01.0: PME# supported from D2 D3hot D3cold
  366. [    0.310627] pci 0000:07:00.0: PCI bridge to [bus 08] (subtractive decode)
  367. [    0.310636] pci 0000:07:00.0:   bridge window [io  0xc000-0xcfff]
  368. [    0.310641] pci 0000:07:00.0:   bridge window [mem 0xfe200000-0xfe2fffff]
  369. [    0.310651] pci 0000:07:00.0:   bridge window [io  0xc000-0xcfff] (subtractive decode)
  370. [    0.310652] pci 0000:07:00.0:   bridge window [mem 0xfe200000-0xfe2fffff] (subtractive decode)
  371. [    0.310653] pci 0000:07:00.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
  372. [    0.310654] pci 0000:07:00.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
  373. [    0.310655] pci 0000:07:00.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
  374. [    0.310656] pci 0000:07:00.0:   bridge window [mem 0xd0000000-0xffffffff window] (subtractive decode)
  375. [    0.310722] pci 0000:09:00.0: [1b4b:9172] type 00 class 0x010601
  376. [    0.310741] pci 0000:09:00.0: reg 0x10: [io  0xb040-0xb047]
  377. [    0.310753] pci 0000:09:00.0: reg 0x14: [io  0xb030-0xb033]
  378. [    0.310765] pci 0000:09:00.0: reg 0x18: [io  0xb020-0xb027]
  379. [    0.310777] pci 0000:09:00.0: reg 0x1c: [io  0xb010-0xb013]
  380. [    0.310789] pci 0000:09:00.0: reg 0x20: [io  0xb000-0xb00f]
  381. [    0.310801] pci 0000:09:00.0: reg 0x24: [mem 0xfe110000-0xfe1101ff]
  382. [    0.310813] pci 0000:09:00.0: reg 0x30: [mem 0xfe100000-0xfe10ffff pref]
  383. [    0.310823] pci 0000:09:00.0: Enabling fixed DMA alias to 00.1
  384. [    0.310874] pci 0000:09:00.0: PME# supported from D3hot
  385. [    0.322031] pci 0000:00:1c.7: PCI bridge to [bus 09]
  386. [    0.322036] pci 0000:00:1c.7:   bridge window [io  0xb000-0xbfff]
  387. [    0.322042] pci 0000:00:1c.7:   bridge window [mem 0xfe100000-0xfe1fffff]
  388. [    0.322475] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
  389. [    0.322514] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
  390. [    0.322552] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
  391. [    0.322589] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
  392. [    0.322626] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15)
  393. [    0.322663] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15)
  394. [    0.322700] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
  395. [    0.322737] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
  396. [    0.322810] ACPI : EC: interrupt unblocked
  397. [    0.322815] ACPI : EC: event unblocked
  398. [    0.322821] ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0x18, EC_CMD/EC_SC=0x66, EC_DATA=0x62
  399. [    0.322822] ACPI: \_SB_.PCI0.SBRG.EC0_: Used as boot DSDT EC to handle transactions and events
  400. [    0.322882] vgaarb: setting as boot device: PCI:0000:01:00.0
  401. [    0.322883] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
  402. [    0.322884] vgaarb: loaded
  403. [    0.322885] vgaarb: bridge control possible 0000:01:00.0
  404. [    0.322936] PCI: Using ACPI for IRQ routing
  405. [    0.324234] PCI: pci_cache_line_size set to 64 bytes
  406. [    0.324297] e820: reserve RAM buffer [mem 0x0009b400-0x0009ffff]
  407. [    0.324298] e820: reserve RAM buffer [mem 0xcec70000-0xcfffffff]
  408. [    0.324299] e820: reserve RAM buffer [mem 0xcf5ca000-0xcfffffff]
  409. [    0.324300] e820: reserve RAM buffer [mem 0xcf800000-0xcfffffff]
  410. [    0.324301] e820: reserve RAM buffer [mem 0x22f800000-0x22fffffff]
  411. [    0.324417] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
  412. [    0.324421] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
  413. [    0.326439] clocksource: Switched to clocksource hpet
  414. [    0.330861] VFS: Disk quotas dquot_6.6.0
  415. [    0.330884] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  416. [    0.330947] pnp: PnP ACPI init
  417. [    0.331050] system 00:00: [mem 0xfed10000-0xfed19fff] has been reserved
  418. [    0.331051] system 00:00: [mem 0xe0000000-0xe3ffffff] has been reserved
  419. [    0.331053] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
  420. [    0.331054] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
  421. [    0.331055] system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved
  422. [    0.331058] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
  423. [    0.331126] system 00:01: [io  0x0290-0x029f] has been reserved
  424. [    0.331127] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
  425. [    0.331151] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
  426. [    0.331191] system 00:03: [io  0x04d0-0x04d1] has been reserved
  427. [    0.331193] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
  428. [    0.331225] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
  429. [    0.331382] pnp 00:05: [dma 0 disabled]
  430. [    0.331421] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
  431. [    0.331532] system 00:06: [io  0x0400-0x0453] has been reserved
  432. [    0.331533] system 00:06: [io  0x0458-0x047f] has been reserved
  433. [    0.331535] system 00:06: [io  0x0500-0x057f] has been reserved
  434. [    0.331537] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
  435. [    0.331538] system 00:06: [mem 0xfec00000-0xfecfffff] could not be reserved
  436. [    0.331539] system 00:06: [mem 0xfed08000-0xfed08fff] has been reserved
  437. [    0.331540] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
  438. [    0.331542] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
  439. [    0.331586] system 00:07: [io  0x0454-0x0457] has been reserved
  440. [    0.331588] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
  441. [    0.331734] pnp: PnP ACPI: found 8 devices
  442. [    0.337653] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
  443. [    0.337720] pci 0000:00:01.0: PCI bridge to [bus 01]
  444. [    0.337722] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
  445. [    0.337724] pci 0000:00:01.0:   bridge window [mem 0xfe600000-0xfe6fffff]
  446. [    0.337725] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
  447. [    0.337728] pci 0000:00:1c.0: PCI bridge to [bus 02]
  448. [    0.337738] pci 0000:00:1c.1: PCI bridge to [bus 03]
  449. [    0.337742] pci 0000:00:1c.1:   bridge window [mem 0xfe500000-0xfe5fffff]
  450. [    0.337750] pci 0000:00:1c.2: PCI bridge to [bus 04]
  451. [    0.337762] pci 0000:05:00.0: BAR 6: assigned [mem 0xfe400000-0xfe40ffff pref]
  452. [    0.337763] pci 0000:00:1c.3: PCI bridge to [bus 05]
  453. [    0.337766] pci 0000:00:1c.3:   bridge window [io  0xd000-0xdfff]
  454. [    0.337770] pci 0000:00:1c.3:   bridge window [mem 0xfe400000-0xfe4fffff]
  455. [    0.337778] pci 0000:00:1c.4: PCI bridge to [bus 06]
  456. [    0.337782] pci 0000:00:1c.4:   bridge window [mem 0xfe300000-0xfe3fffff]
  457. [    0.337789] pci 0000:07:00.0: PCI bridge to [bus 08]
  458. [    0.337793] pci 0000:07:00.0:   bridge window [io  0xc000-0xcfff]
  459. [    0.337800] pci 0000:07:00.0:   bridge window [mem 0xfe200000-0xfe2fffff]
  460. [    0.337813] pci 0000:00:1c.6: PCI bridge to [bus 07-08]
  461. [    0.337815] pci 0000:00:1c.6:   bridge window [io  0xc000-0xcfff]
  462. [    0.337820] pci 0000:00:1c.6:   bridge window [mem 0xfe200000-0xfe2fffff]
  463. [    0.337826] pci 0000:00:1c.7: PCI bridge to [bus 09]
  464. [    0.337829] pci 0000:00:1c.7:   bridge window [io  0xb000-0xbfff]
  465. [    0.337833] pci 0000:00:1c.7:   bridge window [mem 0xfe100000-0xfe1fffff]
  466. [    0.337841] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
  467. [    0.337842] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
  468. [    0.337843] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
  469. [    0.337844] pci_bus 0000:00: resource 7 [mem 0xd0000000-0xffffffff window]
  470. [    0.337845] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
  471. [    0.337846] pci_bus 0000:01: resource 1 [mem 0xfe600000-0xfe6fffff]
  472. [    0.337847] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
  473. [    0.337848] pci_bus 0000:03: resource 1 [mem 0xfe500000-0xfe5fffff]
  474. [    0.337849] pci_bus 0000:05: resource 0 [io  0xd000-0xdfff]
  475. [    0.337850] pci_bus 0000:05: resource 1 [mem 0xfe400000-0xfe4fffff]
  476. [    0.337851] pci_bus 0000:06: resource 1 [mem 0xfe300000-0xfe3fffff]
  477. [    0.337852] pci_bus 0000:07: resource 0 [io  0xc000-0xcfff]
  478. [    0.337853] pci_bus 0000:07: resource 1 [mem 0xfe200000-0xfe2fffff]
  479. [    0.337854] pci_bus 0000:07: resource 4 [io  0x0000-0x0cf7 window]
  480. [    0.337855] pci_bus 0000:07: resource 5 [io  0x0d00-0xffff window]
  481. [    0.337856] pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff window]
  482. [    0.337857] pci_bus 0000:07: resource 7 [mem 0xd0000000-0xffffffff window]
  483. [    0.337858] pci_bus 0000:08: resource 0 [io  0xc000-0xcfff]
  484. [    0.337859] pci_bus 0000:08: resource 1 [mem 0xfe200000-0xfe2fffff]
  485. [    0.337860] pci_bus 0000:08: resource 4 [io  0xc000-0xcfff]
  486. [    0.337861] pci_bus 0000:08: resource 5 [mem 0xfe200000-0xfe2fffff]
  487. [    0.337862] pci_bus 0000:08: resource 6 [io  0x0000-0x0cf7 window]
  488. [    0.337863] pci_bus 0000:08: resource 7 [io  0x0d00-0xffff window]
  489. [    0.337864] pci_bus 0000:08: resource 8 [mem 0x000a0000-0x000bffff window]
  490. [    0.337865] pci_bus 0000:08: resource 9 [mem 0xd0000000-0xffffffff window]
  491. [    0.337866] pci_bus 0000:09: resource 0 [io  0xb000-0xbfff]
  492. [    0.337867] pci_bus 0000:09: resource 1 [mem 0xfe100000-0xfe1fffff]
  493. [    0.337940] NET: Registered protocol family 2
  494. [    0.338086] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
  495. [    0.338179] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
  496. [    0.338294] TCP: Hash tables configured (established 65536 bind 65536)
  497. [    0.338310] UDP hash table entries: 4096 (order: 5, 131072 bytes)
  498. [    0.338329] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
  499. [    0.338376] NET: Registered protocol family 1
  500. [    0.602559] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
  501. [    0.602775] PCI: CLS 64 bytes, default 64
  502. [    0.602807] Unpacking initramfs...
  503. [    0.833946] Freeing initrd memory: 18820K
  504. [    0.833990] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
  505. [    0.833991] software IO TLB [mem 0xcac70000-0xcec70000] (64MB) mapped at [ffff88f50ac70000-ffff88f50ec6ffff]
  506. [    0.834337] audit: initializing netlink subsys (disabled)
  507. [    0.834351] audit: type=2000 audit(1544096066.720:1): initialized
  508. [    0.834671] workingset: timestamp_bits=40 max_order=21 bucket_order=0
  509. [    0.834723] zbud: loaded
  510. [    0.835357] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
  511. [    0.835382] io scheduler noop registered
  512. [    0.835383] io scheduler deadline registered
  513. [    0.835392] io scheduler cfq registered (default)
  514. [    0.836177] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
  515. [    0.836178] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
  516. [    0.836179] pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
  517. [    0.836181] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded
  518. [    0.836196] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
  519. [    0.836200] pcie_pme 0000:00:1c.0:pcie001: service driver pcie_pme loaded
  520. [    0.836215] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
  521. [    0.836216] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
  522. [    0.836219] pcie_pme 0000:00:1c.1:pcie001: service driver pcie_pme loaded
  523. [    0.836235] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
  524. [    0.836238] pcie_pme 0000:00:1c.2:pcie001: service driver pcie_pme loaded
  525. [    0.836253] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
  526. [    0.836254] pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
  527. [    0.836257] pcie_pme 0000:00:1c.3:pcie001: service driver pcie_pme loaded
  528. [    0.836272] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
  529. [    0.836272] pci 0000:06:00.0: Signaling PME through PCIe PME interrupt
  530. [    0.836276] pcie_pme 0000:00:1c.4:pcie001: service driver pcie_pme loaded
  531. [    0.836291] pcieport 0000:00:1c.7: Signaling PME through PCIe PME interrupt
  532. [    0.836292] pci 0000:09:00.0: Signaling PME through PCIe PME interrupt
  533. [    0.836295] pcie_pme 0000:00:1c.7:pcie001: service driver pcie_pme loaded
  534. [    0.836302] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
  535. [    0.836306] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
  536. [    0.836315] intel_idle: MWAIT substates: 0x1120
  537. [    0.836316] intel_idle: v0.4.1 model 0x2A
  538. [    0.836508] intel_idle: lapic_timer_reliable_states 0xffffffff
  539. [    0.837299] GHES: HEST is not enabled!
  540. [    0.837340] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  541. [    0.857829] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
  542. [    0.858124] Linux agpgart interface v0.103
  543. [    0.858178] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
  544. [    0.858178] AMD IOMMUv2 functionality not available on this system
  545. [    0.858693] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
  546. [    0.858694] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
  547. [    0.859186] serio: i8042 KBD port at 0x60,0x64 irq 1
  548. [    0.859261] mousedev: PS/2 mouse device common for all mice
  549. [    0.859293] rtc_cmos 00:02: RTC can wake from S4
  550. [    0.859408] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
  551. [    0.859430] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
  552. [    0.859438] intel_pstate: Intel P-state driver initializing
  553. [    0.859955] ledtrig-cpu: registered to indicate activity on CPUs
  554. [    0.860957] NET: Registered protocol family 10
  555. [    0.861333] mip6: Mobile IPv6
  556. [    0.861335] NET: Registered protocol family 17
  557. [    0.861338] mpls_gso: MPLS GSO support
  558. [    0.861737] microcode: sig=0x206a7, pf=0x2, revision=0x2d
  559. [    0.861912] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
  560. [    0.862094] registered taskstats version 1
  561. [    0.862118] zswap: loaded using pool lzo/zbud
  562. [    0.862299] ima: No TPM chip found, activating TPM-bypass!
  563. [    0.862302] ima: Allocated hash algorithm: sha256
  564. [    0.862864] rtc_cmos 00:02: setting system clock to 2018-12-06 11:34:27 UTC (1544096067)
  565. [    0.862954] PM: Hibernation image not present or could not be loaded.
  566. [    0.864070] Freeing unused kernel memory: 1420K
  567. [    0.864072] Write protecting the kernel read-only data: 12288k
  568. [    0.864785] Freeing unused kernel memory: 1920K
  569. [    0.868974] Freeing unused kernel memory: 1224K
  570. [    0.877944] x86/mm: Checked W+X mappings: passed, no W+X pages found.
  571. [    0.882081] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
  572. [    0.898753] random: systemd-udevd: uninitialized urandom read (16 bytes read)
  573. [    0.898864] random: systemd-udevd: uninitialized urandom read (16 bytes read)
  574. [    0.898879] random: systemd-udevd: uninitialized urandom read (16 bytes read)
  575. [    0.939245] pps_core: LinuxPPS API ver. 1 registered
  576. [    0.939247] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  577. [    0.939579] PTP clock support registered
  578. [    0.941220] ACPI: bus type USB registered
  579. [    0.941247] usbcore: registered new interface driver usbfs
  580. [    0.941258] usbcore: registered new interface driver hub
  581. [    0.941306] usbcore: registered new device driver usb
  582. [    0.941430] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
  583. [    0.941431] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
  584. [    0.941615] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
  585. [    0.941972] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  586. [    0.942503] ehci-pci: EHCI PCI platform driver
  587. [    0.942609] SCSI subsystem initialized
  588. [    0.943190] xhci_hcd 0000:03:00.0: xHCI Host Controller
  589. [    0.943201] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 1
  590. [    0.943365] xhci_hcd 0000:03:00.0: hcc params 0x014042cb hci version 0x96 quirks 0x00000004
  591. [    0.943667] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  592. [    0.943670] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  593. [    0.943672] usb usb1: Product: xHCI Host Controller
  594. [    0.943674] usb usb1: Manufacturer: Linux 4.9.0-8-amd64 xhci-hcd
  595. [    0.943676] usb usb1: SerialNumber: 0000:03:00.0
  596. [    0.943904] hub 1-0:1.0: USB hub found
  597. [    0.943919] hub 1-0:1.0: 2 ports detected
  598. [    0.944089] xhci_hcd 0000:03:00.0: xHCI Host Controller
  599. [    0.944093] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 2
  600. [    0.945169] libata version 3.00 loaded.
  601. [    0.946806] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
  602. [    0.946836] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
  603. [    0.946838] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  604. [    0.946840] usb usb2: Product: xHCI Host Controller
  605. [    0.946842] usb usb2: Manufacturer: Linux 4.9.0-8-amd64 xhci-hcd
  606. [    0.946844] usb usb2: SerialNumber: 0000:03:00.0
  607. [    0.947013] hub 2-0:1.0: USB hub found
  608. [    0.947026] hub 2-0:1.0: 2 ports detected
  609. [    0.947240] xhci_hcd 0000:06:00.0: xHCI Host Controller
  610. [    0.947247] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 3
  611. [    0.947413] xhci_hcd 0000:06:00.0: hcc params 0x014042cb hci version 0x96 quirks 0x00000004
  612. [    0.947710] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
  613. [    0.947712] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  614. [    0.947714] usb usb3: Product: xHCI Host Controller
  615. [    0.947716] usb usb3: Manufacturer: Linux 4.9.0-8-amd64 xhci-hcd
  616. [    0.947718] usb usb3: SerialNumber: 0000:06:00.0
  617. [    0.947870] hub 3-0:1.0: USB hub found
  618. [    0.947881] hub 3-0:1.0: 2 ports detected
  619. [    0.948031] xhci_hcd 0000:06:00.0: xHCI Host Controller
  620. [    0.948037] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 4
  621. [    0.950879] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
  622. [    0.950913] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
  623. [    0.950917] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  624. [    0.950920] usb usb4: Product: xHCI Host Controller
  625. [    0.950923] usb usb4: Manufacturer: Linux 4.9.0-8-amd64 xhci-hcd
  626. [    0.950926] usb usb4: SerialNumber: 0000:06:00.0
  627. [    0.951112] hub 4-0:1.0: USB hub found
  628. [    0.951126] hub 4-0:1.0: 2 ports detected
  629. [    0.951447] AVX version of gcm_enc/dec engaged.
  630. [    0.951448] AES CTR mode by8 optimization enabled
  631. [    1.018559] firewire_ohci 0000:08:01.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
  632. [    1.084585] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
  633. [    1.212645] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) c8:60:00:6a:38:ae
  634. [    1.212647] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
  635. [    1.212688] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
  636. [    1.212915] ehci-pci 0000:00:1a.0: EHCI Host Controller
  637. [    1.212927] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 5
  638. [    1.212945] ehci-pci 0000:00:1a.0: debug port 2
  639. [    1.213862] e1000e 0000:00:19.0 eno1: renamed from eth0
  640. [    1.216863] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
  641. [    1.216881] ehci-pci 0000:00:1a.0: irq 23, io mem 0xfe727000
  642. [    1.230535] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
  643. [    1.230599] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
  644. [    1.230602] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  645. [    1.230604] usb usb5: Product: EHCI Host Controller
  646. [    1.230606] usb usb5: Manufacturer: Linux 4.9.0-8-amd64 ehci_hcd
  647. [    1.230608] usb usb5: SerialNumber: 0000:00:1a.0
  648. [    1.230843] hub 5-0:1.0: USB hub found
  649. [    1.230857] hub 5-0:1.0: 2 ports detected
  650. [    1.231203] ehci-pci 0000:00:1d.0: EHCI Host Controller
  651. [    1.231211] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 6
  652. [    1.231226] ehci-pci 0000:00:1d.0: debug port 2
  653. [    1.235142] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
  654. [    1.235149] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfe726000
  655. [    1.250543] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
  656. [    1.250596] usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
  657. [    1.250598] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  658. [    1.250600] usb usb6: Product: EHCI Host Controller
  659. [    1.250602] usb usb6: Manufacturer: Linux 4.9.0-8-amd64 ehci_hcd
  660. [    1.250604] usb usb6: SerialNumber: 0000:00:1d.0
  661. [    1.250833] hub 6-0:1.0: USB hub found
  662. [    1.250846] hub 6-0:1.0: 2 ports detected
  663. [    1.251280] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
  664. [    1.251377] ahci 0000:00:1f.2: version 3.0
  665. [    1.251622] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl SATA mode
  666. [    1.251628] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
  667. [    1.263234] scsi host0: ahci
  668. [    1.263397] scsi host1: ahci
  669. [    1.263508] scsi host2: ahci
  670. [    1.263613] scsi host3: ahci
  671. [    1.263719] scsi host4: ahci
  672. [    1.263823] scsi host5: ahci
  673. [    1.263883] ata1: SATA max UDMA/133 abar m2048@0xfe725000 port 0xfe725100 irq 48
  674. [    1.263885] ata2: SATA max UDMA/133 abar m2048@0xfe725000 port 0xfe725180 irq 48
  675. [    1.263886] ata3: DUMMY
  676. [    1.263887] ata4: DUMMY
  677. [    1.263888] ata5: DUMMY
  678. [    1.263889] ata6: DUMMY
  679. [    1.264047] ahci 0000:05:00.0: AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
  680. [    1.264050] ahci 0000:05:00.0: flags: 64bit ncq pm led clo pmp pio slum part
  681. [    1.264369] scsi host6: ahci
  682. [    1.264487] scsi host7: ahci
  683. [    1.264547] ata7: SATA max UDMA/133 abar m512@0xfe410000 port 0xfe410100 irq 19
  684. [    1.264550] ata8: SATA max UDMA/133 abar m512@0xfe410000 port 0xfe410180 irq 19
  685. [    1.264727] ahci 0000:09:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
  686. [    1.264730] ahci 0000:09:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
  687. [    1.265062] scsi host8: ahci
  688. [    1.265174] scsi host9: ahci
  689. [    1.265235] ata9: SATA max UDMA/133 abar m512@0xfe110000 port 0xfe110100 irq 49
  690. [    1.265238] ata10: SATA max UDMA/133 abar m512@0xfe110000 port 0xfe110180 irq 49
  691. [    1.542610] firewire_core 0000:08:01.0: created device fw0: GUID 001e8c00004eb29c, S400
  692. [    1.558500] usb 5-1: new high-speed USB device number 2 using ehci-pci
  693. [    1.577086] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
  694. [    1.577176] ata7: SATA link down (SStatus 0 SControl 300)
  695. [    1.577179] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
  696. [    1.577226] ata8: SATA link down (SStatus 0 SControl 300)
  697. [    1.578492] usb 6-1: new high-speed USB device number 2 using ehci-pci
  698. [    1.588929] ata2.00: ATA-8: OCZ-AGILITY3, 2.22, max UDMA/133
  699. [    1.588932] ata2.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
  700. [    1.589167] ata1.00: ATA-8: Corsair Force 3 SSD, 5.02, max UDMA/133
  701. [    1.589170] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
  702. [    1.598813] ata2.00: configured for UDMA/133
  703. [    1.599061] ata1.00: configured for UDMA/133
  704. [    1.599456] scsi 0:0:0:0: Direct-Access     ATA      Corsair Force 3  5.02 PQ: 0 ANSI: 5
  705. [    1.639132] scsi 1:0:0:0: Direct-Access     ATA      OCZ-AGILITY3     2.22 PQ: 0 ANSI: 5
  706. [    1.706877] usb 5-1: New USB device found, idVendor=8087, idProduct=0024
  707. [    1.706881] usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  708. [    1.707296] hub 5-1:1.0: USB hub found
  709. [    1.707467] hub 5-1:1.0: 6 ports detected
  710. [    1.726842] usb 6-1: New USB device found, idVendor=8087, idProduct=0024
  711. [    1.726845] usb 6-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  712. [    1.727275] hub 6-1:1.0: USB hub found
  713. [    1.727495] hub 6-1:1.0: 8 ports detected
  714. [    1.738513] ata10: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  715. [    1.738538] ata9: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  716. [    1.739662] ata9.00: ATAPI: HL-DT-ST DVDRAM GH24NSC0, LK00, max UDMA/133
  717. [    1.741157] ata9.00: configured for UDMA/133
  718. [    1.744290] ata10.00: ATA-8: ST1000DM005 HD103SJ, 1AJ10001, max UDMA/133
  719. [    1.744292] ata10.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
  720. [    1.744783] scsi 8:0:0:0: CD-ROM            HL-DT-ST DVDRAM GH24NSC0  LK00 PQ: 0 ANSI: 5
  721. [    1.750119] ata10.00: configured for UDMA/133
  722. [    1.759522] scsi 9:0:0:0: Direct-Access     ATA      ST1000DM005 HD10 0001 PQ: 0 ANSI: 5
  723. [    1.798153] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
  724. [    1.798228] sd 1:0:0:0: [sdb] 234441648 512-byte logical blocks: (120 GB/112 GiB)
  725. [    1.798233] sd 0:0:0:0: [sda] Write Protect is off
  726. [    1.798238] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  727. [    1.798267] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  728. [    1.798276] sd 9:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
  729. [    1.798403] sd 1:0:0:0: [sdb] Write Protect is off
  730. [    1.798406] sd 9:0:0:0: [sdc] Write Protect is off
  731. [    1.798409] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
  732. [    1.798411] sd 9:0:0:0: [sdc] Mode Sense: 00 3a 00 00
  733. [    1.798481] sd 9:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  734. [    1.798483] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  735. [    1.800232]  sda: sda1 sda2
  736. [    1.800571] sd 0:0:0:0: [sda] Attached SCSI disk
  737. [    1.800631]  sdb: sdb1 sdb2 < sdb5 >
  738. [    1.801152] sd 1:0:0:0: [sdb] Attached SCSI disk
  739. [    1.817725] sr 8:0:0:0: [sr0] scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray
  740. [    1.817727] cdrom: Uniform CD-ROM driver Revision: 3.20
  741. [    1.817948] sr 8:0:0:0: Attached scsi CD-ROM sr0
  742. [    1.828310]  sdc: sdc1 sdc2
  743. [    1.828931] sd 9:0:0:0: [sdc] Attached SCSI removable disk
  744. [    1.848305] random: fast init done
  745. [    1.862500] tsc: Refined TSC clocksource calibration: 3511.459 MHz
  746. [    1.862519] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x329d99855d1, max_idle_ns: 440795254423 ns
  747. [    2.014535] usb 6-1.7: new high-speed USB device number 3 using ehci-pci
  748. [    2.101206] PM: Starting manual resume from disk
  749. [    2.101211] PM: Hibernation image partition 8:21 present
  750. [    2.101212] PM: Looking for hibernation image.
  751. [    2.101393] PM: Image not found (code -22)
  752. [    2.101394] PM: Hibernation image not present or could not be loaded.
  753. [    2.123220] usb 6-1.7: New USB device found, idVendor=1a40, idProduct=0101
  754. [    2.123223] usb 6-1.7: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  755. [    2.123225] usb 6-1.7: Product: USB 2.0 Hub [MTT]
  756. [    2.123526] hub 6-1.7:1.0: USB hub found
  757. [    2.123685] hub 6-1.7:1.0: 4 ports detected
  758. [    2.174449] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
  759. [    2.202514] usb 6-1.8: new full-speed USB device number 4 using ehci-pci
  760. [    2.258100] systemd[1]: RTC configured in localtime, applying delta of 60 minutes to system time.
  761. [    2.272059] ip_tables: (C) 2000-2006 Netfilter Core Team
  762. [    2.279489] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
  763. [    2.279785] systemd[1]: Detected architecture x86-64.
  764. [    2.280038] systemd[1]: Set hostname to <J6cu>.
  765. [    2.319096] usb 6-1.8: New USB device found, idVendor=0738, idProduct=1708
  766. [    2.319099] usb 6-1.8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  767. [    2.319101] usb 6-1.8: Product: Mad Catz R.A.T.7 Mouse
  768. [    2.319111] usb 6-1.8: Manufacturer: Mad Catz
  769. [    2.338714] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
  770. [    2.338804] systemd[1]: Listening on Journal Socket (/dev/log).
  771. [    2.338831] systemd[1]: Reached target User and Group Name Lookups.
  772. [    2.338892] systemd[1]: Listening on udev Control Socket.
  773. [    2.338949] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
  774. [    2.339124] systemd[1]: Created slice System Slice.
  775. [    2.339699] systemd[1]: Mounting Debug File System...
  776. [    2.351554] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro
  777. [    2.355792] lp: driver loaded but no devices found
  778. [    2.357398] ppdev: user-space parallel port driver
  779. [    2.414788] usb 6-1.7.1: new high-speed USB device number 5 using ehci-pci
  780. [    2.429486] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
  781. [    2.429490] ACPI: Power Button [PWRB]
  782. [    2.429524] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
  783. [    2.429525] ACPI: Power Button [PWRF]
  784. [    2.434020] wmi: Mapper loaded
  785. [    2.447823] systemd-journald[279]: Received request to flush runtime journal from PID 1
  786. [    2.449512] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
  787. [    2.459159] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.SBRG.GPBX) (20160831/utaddress-247)
  788. [    2.459165] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
  789. [    2.459166] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.SBRG.GPBX) (20160831/utaddress-247)
  790. [    2.459170] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
  791. [    2.459171] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.SBRG.GPBX) (20160831/utaddress-247)
  792. [    2.459174] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
  793. [    2.459175] lpc_ich: Resource conflict(s) found affecting gpio_ich
  794. [    2.522762] input: PC Speaker as /devices/platform/pcspkr/input/input3
  795. [    2.523115] sd 0:0:0:0: Attached scsi generic sg0 type 0
  796. [    2.523155] sd 1:0:0:0: Attached scsi generic sg1 type 0
  797. [    2.523189] sr 8:0:0:0: Attached scsi generic sg2 type 5
  798. [    2.523224] sd 9:0:0:0: Attached scsi generic sg3 type 0
  799. [    2.523545] hidraw: raw HID events driver (C) Jiri Kosina
  800. [    2.524086] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
  801. [    2.524087] snd_hda_intel 0000:01:00.1: Force to non-snoop mode
  802. [    2.527201] usbcore: registered new interface driver usbhid
  803. [    2.527202] usbhid: USB HID core driver
  804. [    2.528068] usb 6-1.7.1: New USB device found, idVendor=05e3, idProduct=0723
  805. [    2.528070] usb 6-1.7.1: New USB device strings: Mfr=3, Product=4, SerialNumber=0
  806. [    2.528072] usb 6-1.7.1: Product: USB Storage
  807. [    2.528073] usb 6-1.7.1: Manufacturer: Generic
  808. [    2.528134] [drm] Initialized
  809. [    2.533107] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
  810. [    2.533108] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
  811. [    2.533109] RAPL PMU: hw unit of domain package 2^-16 Joules
  812. [    2.533110] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
  813. [    2.540415] iTCO_vendor_support: vendor-support=0
  814. [    2.542068] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
  815. [    2.542095] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
  816. [    2.542148] input: Mad Catz Mad Catz R.A.T.7 Mouse as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.8/6-1.8:1.0/0003:0738:1708.0001/input/input4
  817. [    2.542232] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
  818. [    2.542327] hid-generic 0003:0738:1708.0001: input,hidraw0: USB HID v1.11 Mouse [Mad Catz Mad Catz R.A.T.7 Mouse] on usb-0000:00:1d.0-1.8/input0
  819. [    2.542751] asus_wmi: ASUS WMI generic driver loaded
  820. [    2.545054] asus_wmi: Initialization: 0x0
  821. [    2.545083] asus_wmi: BIOS WMI version: 0.9
  822. [    2.545128] asus_wmi: SFUN value: 0x0
  823. [    2.545503] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input5
  824. [    2.545624] asus_wmi: Number of fans: 1
  825. [    2.545641] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
  826. [    2.545644] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
  827. [    2.545645] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
  828. [    2.545646] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
  829. [    2.545648] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x11/0x1e
  830. [    2.545649] snd_hda_codec_realtek hdaudioC0D0:    inputs:
  831. [    2.545652] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
  832. [    2.545654] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
  833. [    2.545655] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
  834. [    2.547451] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input6
  835. [    2.547535] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input7
  836. [    2.547610] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input8
  837. [    2.547682] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input9
  838. [    2.547770] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input10
  839. [    2.547846] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11
  840. [    2.551604] usb-storage 6-1.7.1:1.0: USB Mass Storage device detected
  841. [    2.551677] scsi host10: usb-storage 6-1.7.1:1.0
  842. [    2.551761] usbcore: registered new interface driver usb-storage
  843. [    2.553047] usbcore: registered new interface driver uas
  844. [    2.559231] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
  845. [    2.559296] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
  846. [    2.559355] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
  847. [    2.559415] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
  848. [    2.559470] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
  849. [    2.559525] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
  850. [    2.559583] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
  851. [    2.559637] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
  852. [    2.560073] [drm] radeon kernel modesetting enabled.
  853. [    2.570940] CRAT table not found
  854. [    2.570942] Finished initializing topology ret=0
  855. [    2.570960] kfd kfd: Initialized module
  856. [    2.574229] [drm] initializing kernel modesetting (PITCAIRN 0x1002:0x6818 0x1043:0x0432 0x00).
  857. [    2.574249] [drm] register mmio base: 0xFE600000
  858. [    2.574250] [drm] register mmio size: 262144
  859. [    2.574351] ATOM BIOS: 6818.15.21.0.0.AS02
  860. [    2.574426] radeon 0000:01:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used)
  861. [    2.574428] radeon 0000:01:00.0: GTT: 2048M 0x0000000080000000 - 0x00000000FFFFFFFF
  862. [    2.574431] [drm] Detected VRAM RAM=2048M, BAR=256M
  863. [    2.574432] [drm] RAM width 256bits DDR
  864. [    2.574491] [TTM] Zone  kernel: Available graphics memory: 4076078 kiB
  865. [    2.574492] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
  866. [    2.574493] [TTM] Initializing pool allocator
  867. [    2.574499] [TTM] Initializing DMA pool allocator
  868. [    2.574519] [drm] radeon: 2048M of VRAM memory ready
  869. [    2.574520] [drm] radeon: 2048M of GTT memory ready.
  870. [    2.574535] [drm] Loading pitcairn Microcode
  871. [    2.575637] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/pitcairn_pfp.bin
  872. [    2.576268] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/pitcairn_me.bin
  873. [    2.576673] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/pitcairn_ce.bin
  874. [    2.577048] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/pitcairn_rlc.bin
  875. [    2.577670] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/pitcairn_mc.bin
  876. [    2.578278] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/pitcairn_smc.bin
  877. [    2.578281] [drm] Internal thermal controller with fan control
  878. [    2.578338] [drm] probing gen 2 caps for device 8086:101 = 2212102/0
  879. [    2.580261] intel_rapl: Found RAPL domain package
  880. [    2.580262] intel_rapl: Found RAPL domain core
  881. [    2.580267] intel_rapl: RAPL package 0 domain package locked by BIOS
  882. [    2.587482] [drm] radeon: dpm initialized
  883. [    2.588789] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/TAHITI_uvd.bin
  884. [    2.589335] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/TAHITI_vce.bin
  885. [    2.590768] [drm] Found VCE firmware/feedback version 50.0.1 / 17!
  886. [    2.590775] [drm] GART: num cpu pages 524288, num gpu pages 524288
  887. [    2.591724] [drm] probing gen 2 caps for device 8086:101 = 2212102/0
  888. [    2.591727] [drm] PCIE gen 2 link speeds already enabled
  889. [    2.592077] Adding 8363004k swap on /dev/sdb5.  Priority:-1 extents:1 across:8363004k SSFS
  890. [    2.616510] [drm] PCIE GART of 2048M enabled (table at 0x00000000001D6000).
  891. [    2.616659] radeon 0000:01:00.0: WB enabled
  892. [    2.616661] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff88f663b6dc00
  893. [    2.616663] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0xffff88f663b6dc04
  894. [    2.616664] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0xffff88f663b6dc08
  895. [    2.616666] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff88f663b6dc0c
  896. [    2.616667] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0xffff88f663b6dc10
  897. [    2.617170] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0xffffa9fc81635a18
  898. [    2.637265] radeon 0000:01:00.0: fence driver on ring 6 use gpu addr 0x0000000080000c18 and cpu addr 0xffff88f663b6dc18
  899. [    2.637267] radeon 0000:01:00.0: fence driver on ring 7 use gpu addr 0x0000000080000c1c and cpu addr 0xffff88f663b6dc1c
  900. [    2.637269] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
  901. [    2.637269] [drm] Driver supports precise vblank timestamp query.
  902. [    2.637270] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
  903. [    2.637306] radeon 0000:01:00.0: radeon: using MSI.
  904. [    2.637337] [drm] radeon: irq initialized.
  905. [    2.814409] [drm] ring test on 0 succeeded in 3 usecs
  906. [    2.814414] [drm] ring test on 1 succeeded in 1 usecs
  907. [    2.814417] [drm] ring test on 2 succeeded in 1 usecs
  908. [    2.814427] [drm] ring test on 3 succeeded in 6 usecs
  909. [    2.814435] [drm] ring test on 4 succeeded in 6 usecs
  910. [    2.990154] clocksource: Switched to clocksource tsc
  911. [    2.990161] [drm] ring test on 5 succeeded in 2 usecs
  912. [    2.990166] [drm] UVD initialized successfully.
  913. [    3.099403] [drm] ring test on 6 succeeded in 28 usecs
  914. [    3.099417] [drm] ring test on 7 succeeded in 4 usecs
  915. [    3.099417] [drm] VCE initialized successfully.
  916. [    3.099677] [drm] ib test on ring 0 succeeded in 0 usecs
  917. [    3.099752] [drm] ib test on ring 1 succeeded in 0 usecs
  918. [    3.099804] [drm] ib test on ring 2 succeeded in 0 usecs
  919. [    3.099842] [drm] ib test on ring 3 succeeded in 0 usecs
  920. [    3.099878] [drm] ib test on ring 4 succeeded in 0 usecs
  921. [    3.366000] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
  922. [    3.559985] scsi 10:0:0:0: Direct-Access     Generic  STORAGE DEVICE   9454 PQ: 0 ANSI: 0
  923. [    3.560310] sd 10:0:0:0: Attached scsi generic sg4 type 0
  924. [    3.561575] sd 10:0:0:0: [sdd] Attached SCSI removable disk
  925. [    3.626645] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
  926. [    3.754546] [drm] ib test on ring 5 succeeded
  927. [    4.262573] [drm] ib test on ring 6 succeeded
  928. [    4.774589] [drm] ib test on ring 7 succeeded
  929. [    4.775020] [drm] Radeon Display Connectors
  930. [    4.775021] [drm] Connector 0:
  931. [    4.775021] [drm]   DP-1
  932. [    4.775021] [drm]   HPD4
  933. [    4.775022] [drm]   DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
  934. [    4.775023] [drm]   Encoders:
  935. [    4.775023] [drm]     DFP1: INTERNAL_UNIPHY2
  936. [    4.775023] [drm] Connector 1:
  937. [    4.775024] [drm]   HDMI-A-1
  938. [    4.775024] [drm]   HPD5
  939. [    4.775025] [drm]   DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
  940. [    4.775025] [drm]   Encoders:
  941. [    4.775025] [drm]     DFP2: INTERNAL_UNIPHY2
  942. [    4.775026] [drm] Connector 2:
  943. [    4.775026] [drm]   DVI-D-1
  944. [    4.775026] [drm]   HPD1
  945. [    4.775027] [drm]   DDC: 0x6570 0x6570 0x6574 0x6574 0x6578 0x6578 0x657c 0x657c
  946. [    4.775028] [drm]   Encoders:
  947. [    4.775028] [drm]     DFP3: INTERNAL_UNIPHY1
  948. [    4.775028] [drm] Connector 3:
  949. [    4.775029] [drm]   DVI-I-1
  950. [    4.775029] [drm]   HPD6
  951. [    4.775030] [drm]   DDC: 0x6580 0x6580 0x6584 0x6584 0x6588 0x6588 0x658c 0x658c
  952. [    4.775030] [drm]   Encoders:
  953. [    4.775030] [drm]     DFP4: INTERNAL_UNIPHY
  954. [    4.775031] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
  955. [    4.864789] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
  956. [    4.924280] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
  957. [    4.957507] [drm] fb mappable at 0xD05D8000
  958. [    4.957508] [drm] vram apper at 0xD0000000
  959. [    4.957508] [drm] size 8294400
  960. [    4.957508] [drm] fb depth is 24
  961. [    4.957509] [drm]    pitch is 7680
  962. [    4.957645] fbcon: radeondrmfb (fb0) is primary device
  963. [    4.957748] Console: switching to colour frame buffer device 240x67
  964. [    4.957751] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
  965. [    4.982590] [drm] Initialized radeon 2.49.0 20080528 for 0000:01:00.0 on minor 0
  966. [    5.364581] e1000e: eno1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
  967. [    5.364586] e1000e 0000:00:19.0 eno1: 10/100 speed: disabling TSO
  968. [    5.364625] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
  969. [    8.266483] random: crng init done
  970. [    8.266485] random: 7 urandom warning(s) missed due to ratelimiting
  971. [   53.582748] fuse init (API version 7.26)
  972. [10259.971396] sd 10:0:0:0: [sdd] 15523840 512-byte logical blocks: (7.95 GB/7.40 GiB)
  973. [10259.985703]  sdd: sdd1 sdd2
  974. [10260.472506] EXT4-fs (sdd2): mounted filesystem with ordered data mode. Opts: (null)
  975. [10265.769453] sd 10:0:0:0: [sdd] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  976. [10265.769457] sd 10:0:0:0: [sdd] tag#0 Sense Key : Not Ready [current]
  977. [10265.769460] sd 10:0:0:0: [sdd] tag#0 Add. Sense: Medium not present
  978. [10265.769463] sd 10:0:0:0: [sdd] tag#0 CDB: Read(10) 28 00 00 0a df 48 00 00 20 00
  979. [10265.769465] blk_update_request: I/O error, dev sdd, sector 712520
  980. [10265.771325] sd 10:0:0:0: [sdd] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  981. [10265.771328] sd 10:0:0:0: [sdd] tag#0 Sense Key : Not Ready [current]
  982. [10265.771331] sd 10:0:0:0: [sdd] tag#0 Add. Sense: Medium not present
  983. [10265.771343] sd 10:0:0:0: [sdd] tag#0 CDB: Read(10) 28 00 00 00 08 05 00 00 11 00
  984. [10265.771345] blk_update_request: I/O error, dev sdd, sector 2053
  985. [10265.772706] sd 10:0:0:0: [sdd] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  986. [10265.772710] sd 10:0:0:0: [sdd] tag#0 Sense Key : Not Ready [current]
  987. [10265.772714] sd 10:0:0:0: [sdd] tag#0 Add. Sense: Medium not present
  988. [10265.772718] sd 10:0:0:0: [sdd] tag#0 CDB: Read(10) 28 00 00 00 08 06 00 00 10 00
  989. [10265.772720] blk_update_request: I/O error, dev sdd, sector 2054
  990. [10265.774579] sd 10:0:0:0: [sdd] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  991. [10265.774583] sd 10:0:0:0: [sdd] tag#0 Sense Key : Not Ready [current]
  992. [10265.774586] sd 10:0:0:0: [sdd] tag#0 Add. Sense: Medium not present
  993. [10265.774590] sd 10:0:0:0: [sdd] tag#0 CDB: Read(10) 28 00 00 00 08 17 00 00 0d 00
  994. [10265.774592] blk_update_request: I/O error, dev sdd, sector 2071
  995. [10265.775829] sd 10:0:0:0: [sdd] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  996. [10265.775833] sd 10:0:0:0: [sdd] tag#0 Sense Key : Not Ready [current]
  997. [10265.775837] sd 10:0:0:0: [sdd] tag#0 Add. Sense: Medium not present
  998. [10265.775841] sd 10:0:0:0: [sdd] tag#0 CDB: Read(10) 28 00 00 00 08 18 00 00 0c 00
  999. [10265.775844] blk_update_request: I/O error, dev sdd, sector 2072
  1000. [10265.777704] sd 10:0:0:0: [sdd] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  1001. [10265.777708] sd 10:0:0:0: [sdd] tag#0 Sense Key : Not Ready [current]
  1002. [10265.777712] sd 10:0:0:0: [sdd] tag#0 Add. Sense: Medium not present
  1003. [10265.777715] sd 10:0:0:0: [sdd] tag#0 CDB: Read(10) 28 00 00 00 08 05 00 00 01 00
  1004. [10265.777718] blk_update_request: I/O error, dev sdd, sector 2053
  1005. [10265.777755] FAT-fs (sdd1): FAT read failed (blocknr 5)
  1006. [10265.785816] JBD2: Error -5 detected when updating journal superblock for sdd2-8.
  1007. [10265.785821] Aborting journal on device sdd2-8.
  1008. [10265.785834] JBD2: Error -5 detected when updating journal superblock for sdd2-8.
  1009. [10265.820409] VFS: Dirty inode writeback failed for block device sdd1 (err=-5).
  1010. [10296.130692] sd 10:0:0:0: [sdd] 15523840 512-byte logical blocks: (7.95 GB/7.40 GiB)
  1011. [10296.401347] sd 10:0:0:0: [sdd] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  1012. [10296.401352] sd 10:0:0:0: [sdd] tag#0 Sense Key : Unit Attention [current]
  1013. [10296.401355] sd 10:0:0:0: [sdd] tag#0 Add. Sense: Not ready to ready change, medium may have changed
  1014. [10296.401359] sd 10:0:0:0: [sdd] tag#0 CDB: Read(10) 28 00 00 00 00 00 00 00 08 00
  1015. [10296.401361] blk_update_request: I/O error, dev sdd, sector 0
  1016. [10296.401367] Buffer I/O error on dev sdd, logical block 0, async page read
  1017. [10296.401442] ldm_validate_partition_table(): Disk read failed.
  1018. [10296.401492] Dev sdd: unable to read RDB block 0
  1019. [10296.401560]  sdd: unable to read partition table
  1020. [10296.419830]  sdd: sdd1 sdd2
  1021. [10297.067051] FAT-fs (sdd1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
  1022. [10297.085584] EXT4-fs (sdd2): recovery complete
  1023. [10297.085589] EXT4-fs (sdd2): mounted filesystem with ordered data mode. Opts: (null)
  1024. [10301.881537] sd 10:0:0:0: [sdd] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  1025. [10301.881542] sd 10:0:0:0: [sdd] tag#0 Sense Key : Not Ready [current]
  1026. [10301.881545] sd 10:0:0:0: [sdd] tag#0 Add. Sense: Medium not present
  1027. [10301.881550] sd 10:0:0:0: [sdd] tag#0 CDB: Read(10) 28 00 00 17 f8 00 00 00 20 00
  1028. [10301.881552] blk_update_request: I/O error, dev sdd, sector 1570816
  1029. [10301.883490] sd 10:0:0:0: [sdd] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  1030. [10301.883493] sd 10:0:0:0: [sdd] tag#0 Sense Key : Not Ready [current]
  1031. [10301.883496] sd 10:0:0:0: [sdd] tag#0 Add. Sense: Medium not present
  1032. [10301.883499] sd 10:0:0:0: [sdd] tag#0 CDB: Read(10) 28 00 00 00 b0 00 00 00 08 00
  1033. [10301.883501] blk_update_request: I/O error, dev sdd, sector 45056
  1034. [10301.885355] sd 10:0:0:0: [sdd] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  1035. [10301.885367] sd 10:0:0:0: [sdd] tag#0 Sense Key : Not Ready [current]
  1036. [10301.885370] sd 10:0:0:0: [sdd] tag#0 Add. Sense: Medium not present
  1037. [10301.885373] sd 10:0:0:0: [sdd] tag#0 CDB: Read(10) 28 00 00 00 b0 08 00 00 28 00
  1038. [10301.885375] blk_update_request: I/O error, dev sdd, sector 45064
  1039. [10301.886602] sd 10:0:0:0: [sdd] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  1040. [10301.886605] sd 10:0:0:0: [sdd] tag#0 Sense Key : Not Ready [current]
  1041. [10301.886617] sd 10:0:0:0: [sdd] tag#0 Add. Sense: Medium not present
  1042. [10301.886619] sd 10:0:0:0: [sdd] tag#0 CDB: Read(10) 28 00 00 00 b0 10 00 00 20 00
  1043. [10301.886621] blk_update_request: I/O error, dev sdd, sector 45072
  1044. [10301.888492] sd 10:0:0:0: [sdd] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  1045. [10301.888495] sd 10:0:0:0: [sdd] tag#0 Sense Key : Not Ready [current]
  1046. [10301.888498] sd 10:0:0:0: [sdd] tag#0 Add. Sense: Medium not present
  1047. [10301.888501] sd 10:0:0:0: [sdd] tag#0 CDB: Read(10) 28 00 00 00 b0 30 00 00 d8 00
  1048. [10301.888503] blk_update_request: I/O error, dev sdd, sector 45104
  1049. [10301.888558] EXT4-fs error (device sdd2): __ext4_get_inode_loc:4363: inode #18180: block 1286: comm pool: unable to read itable block
  1050. [10301.889112] EXT4-fs warning (device sdd2): htree_dirblock_to_tree:962: inode #15940: lblock 0: comm pool: error -5 reading directory block
  1051. [10301.889459] EXT4-fs warning (device sdd2): htree_dirblock_to_tree:962: inode #15939: lblock 0: comm pool: error -5 reading directory block
  1052. [10301.889840] EXT4-fs warning (device sdd2): htree_dirblock_to_tree:962: inode #15938: lblock 0: comm pool: error -5 reading directory block
  1053. [10301.890133] EXT4-fs warning (device sdd2): htree_dirblock_to_tree:962: inode #15937: lblock 0: comm pool: error -5 reading directory block
  1054. [10301.890488] EXT4-fs warning (device sdd2): htree_dirblock_to_tree:962: inode #7980: lblock 0: comm pool: error -5 reading directory block
  1055. [10301.890894] EXT4-fs warning (device sdd2): htree_dirblock_to_tree:962: inode #7978: lblock 0: comm pool: error -5 reading directory block
  1056. [10301.891163] EXT4-fs warning (device sdd2): htree_dirblock_to_tree:962: inode #7977: lblock 0: comm pool: error -5 reading directory block
  1057. [10301.891465] EXT4-fs warning (device sdd2): htree_dirblock_to_tree:962: inode #7976: lblock 0: comm pool: error -5 reading directory block
  1058. [10301.891736] EXT4-fs warning (device sdd2): htree_dirblock_to_tree:962: inode #7975: lblock 0: comm pool: error -5 reading directory block
  1059. [10301.891997] EXT4-fs warning (device sdd2): htree_dirblock_to_tree:962: inode #7974: lblock 0: comm pool: error -5 reading directory block
  1060. [10301.972247] JBD2: Error -5 detected when updating journal superblock for sdd2-8.
  1061. [10301.972251] Aborting journal on device sdd2-8.
  1062. [10301.972263] JBD2: Error -5 detected when updating journal superblock for sdd2-8.
  1063. [10301.972635] EXT4-fs (sdd2): previous I/O error to superblock detected
  1064. [10727.361020] sd 10:0:0:0: [sdd] 15523840 512-byte logical blocks: (7.95 GB/7.40 GiB)
  1065. [10727.632311] sd 10:0:0:0: [sdd] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  1066. [10727.632315] sd 10:0:0:0: [sdd] tag#0 Sense Key : Unit Attention [current]
  1067. [10727.632319] sd 10:0:0:0: [sdd] tag#0 Add. Sense: Not ready to ready change, medium may have changed
  1068. [10727.632323] sd 10:0:0:0: [sdd] tag#0 CDB: Read(10) 28 00 00 00 00 00 00 00 08 00
  1069. [10727.632325] blk_update_request: I/O error, dev sdd, sector 0
  1070. [10727.632331] Buffer I/O error on dev sdd, logical block 0, async page read
  1071. [10727.632407] ldm_validate_partition_table(): Disk read failed.
  1072. [10727.632461] Dev sdd: unable to read RDB block 0
  1073. [10727.632520]  sdd: unable to read partition table
  1074. [10727.650467]  sdd: sdd1 sdd2
  1075. [10728.223026] FAT-fs (sdd1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
  1076. [10728.240375] EXT4-fs (sdd2): recovery complete
  1077. [10728.240380] EXT4-fs (sdd2): mounted filesystem with ordered data mode. Opts: (null)
  1078. [10733.536566] sd 10:0:0:0: [sdd] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  1079. [10733.536571] sd 10:0:0:0: [sdd] tag#0 Sense Key : Not Ready [current]
  1080. [10733.536575] sd 10:0:0:0: [sdd] tag#0 Add. Sense: Medium not present
  1081. [10733.536579] sd 10:0:0:0: [sdd] tag#0 CDB: Read(10) 28 00 00 0a df 48 00 00 20 00
  1082. [10733.536582] blk_update_request: I/O error, dev sdd, sector 712520
  1083. [10733.538723] sd 10:0:0:0: [sdd] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  1084. [10733.538728] sd 10:0:0:0: [sdd] tag#0 Sense Key : Not Ready [current]
  1085. [10733.538733] sd 10:0:0:0: [sdd] tag#0 Add. Sense: Medium not present
  1086. [10733.538738] sd 10:0:0:0: [sdd] tag#0 CDB: Read(10) 28 00 00 0a df 48 00 00 08 00
  1087. [10733.538741] blk_update_request: I/O error, dev sdd, sector 712520
  1088. [10733.540720] sd 10:0:0:0: [sdd] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  1089. [10733.540724] sd 10:0:0:0: [sdd] tag#0 Sense Key : Not Ready [current]
  1090. [10733.540729] sd 10:0:0:0: [sdd] tag#0 Add. Sense: Medium not present
  1091. [10733.540734] sd 10:0:0:0: [sdd] tag#0 CDB: Write(10) 2a 00 00 18 88 00 00 00 08 00
  1092. [10733.540737] blk_update_request: I/O error, dev sdd, sector 1607680
  1093. [10733.540743] Buffer I/O error on dev sdd2, logical block 196608, lost sync page write
  1094. [10733.540784] JBD2: Error -5 detected when updating journal superblock for sdd2-8.
  1095. [10733.540788] Aborting journal on device sdd2-8.
  1096. [10733.542720] sd 10:0:0:0: [sdd] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  1097. [10733.542725] sd 10:0:0:0: [sdd] tag#0 Sense Key : Not Ready [current]
  1098. [10733.542730] sd 10:0:0:0: [sdd] tag#0 Add. Sense: Medium not present
  1099. [10733.542735] sd 10:0:0:0: [sdd] tag#0 CDB: Write(10) 2a 00 00 18 88 00 00 00 08 00
  1100. [10733.542737] blk_update_request: I/O error, dev sdd, sector 1607680
  1101. [10733.542742] Buffer I/O error on dev sdd2, logical block 196608, lost sync page write
  1102. [10733.542782] JBD2: Error -5 detected when updating journal superblock for sdd2-8.
  1103. [10759.841523] sd 10:0:0:0: [sdd] 15523840 512-byte logical blocks: (7.95 GB/7.40 GiB)
  1104. [10760.112806] sd 10:0:0:0: [sdd] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  1105. [10760.112810] sd 10:0:0:0: [sdd] tag#0 Sense Key : Unit Attention [current]
  1106. [10760.112814] sd 10:0:0:0: [sdd] tag#0 Add. Sense: Not ready to ready change, medium may have changed
  1107. [10760.112817] sd 10:0:0:0: [sdd] tag#0 CDB: Read(10) 28 00 00 00 00 00 00 00 08 00
  1108. [10760.112820] blk_update_request: I/O error, dev sdd, sector 0
  1109. [10760.112826] Buffer I/O error on dev sdd, logical block 0, async page read
  1110. [10760.112929] ldm_validate_partition_table(): Disk read failed.
  1111. [10760.112963] Dev sdd: unable to read RDB block 0
  1112. [10760.113005]  sdd: unable to read partition table
  1113. [10760.130477]  sdd: sdd1 sdd2
  1114. [10760.701635] FAT-fs (sdd1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
  1115. [10760.716346] EXT4-fs (sdd2): recovery complete
  1116. [10760.716349] EXT4-fs (sdd2): mounted filesystem with ordered data mode. Opts: (null)
  1117. [10766.007738] sd 10:0:0:0: [sdd] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  1118. [10766.007742] sd 10:0:0:0: [sdd] tag#0 Sense Key : Not Ready [current]
  1119. [10766.007746] sd 10:0:0:0: [sdd] tag#0 Add. Sense: Medium not present
  1120. [10766.007749] sd 10:0:0:0: [sdd] tag#0 CDB: Read(10) 28 00 00 0a df 48 00 00 20 00
  1121. [10766.007752] blk_update_request: I/O error, dev sdd, sector 712520
  1122. [10766.009816] sd 10:0:0:0: [sdd] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  1123. [10766.009819] sd 10:0:0:0: [sdd] tag#0 Sense Key : Not Ready [current]
  1124. [10766.009822] sd 10:0:0:0: [sdd] tag#0 Add. Sense: Medium not present
  1125. [10766.009825] sd 10:0:0:0: [sdd] tag#0 CDB: Read(10) 28 00 00 0a df 48 00 00 08 00
  1126. [10766.009827] blk_update_request: I/O error, dev sdd, sector 712520
  1127. [10766.011697] sd 10:0:0:0: [sdd] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  1128. [10766.011701] sd 10:0:0:0: [sdd] tag#0 Sense Key : Not Ready [current]
  1129. [10766.011704] sd 10:0:0:0: [sdd] tag#0 Add. Sense: Medium not present
  1130. [10766.011707] sd 10:0:0:0: [sdd] tag#0 CDB: Write(10) 2a 00 00 18 88 00 00 00 08 00
  1131. [10766.011710] blk_update_request: I/O error, dev sdd, sector 1607680
  1132. [10766.011714] Buffer I/O error on dev sdd2, logical block 196608, lost sync page write
  1133. [10766.011738] JBD2: Error -5 detected when updating journal superblock for sdd2-8.
  1134. [10766.011744] Aborting journal on device sdd2-8.
  1135. [10766.013567] sd 10:0:0:0: [sdd] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  1136. [10766.013570] sd 10:0:0:0: [sdd] tag#0 Sense Key : Not Ready [current]
  1137. [10766.013573] sd 10:0:0:0: [sdd] tag#0 Add. Sense: Medium not present
  1138. [10766.013576] sd 10:0:0:0: [sdd] tag#0 CDB: Write(10) 2a 00 00 18 88 00 00 00 08 00
  1139. [10766.013578] blk_update_request: I/O error, dev sdd, sector 1607680
  1140. [10766.013590] Buffer I/O error on dev sdd2, logical block 196608, lost sync page write
  1141. [10766.013599] JBD2: Error -5 detected when updating journal superblock for sdd2-8.
  1142. [10856.832599] sd 10:0:0:0: [sdd] 15523840 512-byte logical blocks: (7.95 GB/7.40 GiB)
  1143. [10856.833872] sd 10:0:0:0: [sdd] Write Protect is on
  1144. [10856.833876] sd 10:0:0:0: [sdd] Mode Sense: 03 00 80 00
  1145. [10857.104059] sd 10:0:0:0: [sdd] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  1146. [10857.104063] sd 10:0:0:0: [sdd] tag#0 Sense Key : Unit Attention [current]
  1147. [10857.104066] sd 10:0:0:0: [sdd] tag#0 Add. Sense: Not ready to ready change, medium may have changed
  1148. [10857.104069] sd 10:0:0:0: [sdd] tag#0 CDB: Read(10) 28 00 00 00 00 00 00 00 08 00
  1149. [10857.104071] blk_update_request: I/O error, dev sdd, sector 0
  1150. [10857.104076] Buffer I/O error on dev sdd, logical block 0, async page read
  1151. [10857.104147] ldm_validate_partition_table(): Disk read failed.
  1152. [10857.104212] Dev sdd: unable to read RDB block 0
  1153. [10857.104272]  sdd: unable to read partition table
  1154. [10857.121756]  sdd: sdd1 sdd2
  1155. [10858.484417] EXT4-fs (sdd2): INFO: recovery required on readonly filesystem
  1156. [10858.484419] EXT4-fs (sdd2): write access unavailable, cannot proceed
  1157. [10860.264920] EXT4-fs (sdd2): INFO: recovery required on readonly filesystem
  1158. [10860.264923] EXT4-fs (sdd2): write access unavailable, cannot proceed
  1159. [10876.757500] EXT4-fs (sdd2): INFO: recovery required on readonly filesystem
  1160. [10876.757502] EXT4-fs (sdd2): write access unavailable, cannot proceed
  1161. [10906.639954] EXT4-fs (sdd2): INFO: recovery required on readonly filesystem
  1162. [10906.639956] EXT4-fs (sdd2): write access unavailable, cannot proceed
  1163. [11059.936129] sd 10:0:0:0: [sdd] 15523840 512-byte logical blocks: (7.95 GB/7.40 GiB)
  1164. [11059.937438] sd 10:0:0:0: [sdd] Write Protect is off
  1165. [11059.937450] sd 10:0:0:0: [sdd] Mode Sense: 03 00 00 00
  1166. [11059.949413]  sdd: sdd1 sdd2
  1167. [11060.887160] EXT4-fs (sdd2): INFO: recovery required on readonly filesystem
  1168. [11060.887162] EXT4-fs (sdd2): write access unavailable, cannot proceed
  1169. [11069.885001] EXT4-fs (sdd2): INFO: recovery required on readonly filesystem
  1170. [11069.885003] EXT4-fs (sdd2): write access unavailable, cannot proceed
  1171. [11073.161304] EXT4-fs (sdd2): INFO: recovery required on readonly filesystem
  1172. [11073.161306] EXT4-fs (sdd2): write access unavailable, cannot proceed
  1173. [11116.627177] usb 6-1.7.1: USB disconnect, device number 5
  1174. [11116.976976] usb 6-1.7.1: new high-speed USB device number 6 using ehci-pci
  1175. [11117.089088] usb 6-1.7.1: New USB device found, idVendor=05e3, idProduct=0723
  1176. [11117.089092] usb 6-1.7.1: New USB device strings: Mfr=3, Product=4, SerialNumber=0
  1177. [11117.089094] usb 6-1.7.1: Product: USB Storage
  1178. [11117.089095] usb 6-1.7.1: Manufacturer: Generic
  1179. [11117.089858] usb-storage 6-1.7.1:1.0: USB Mass Storage device detected
  1180. [11117.090200] scsi host10: usb-storage 6-1.7.1:1.0
  1181. [11118.110617] scsi 10:0:0:0: Direct-Access     Generic  STORAGE DEVICE   9454 PQ: 0 ANSI: 0
  1182. [11118.111359] sd 10:0:0:0: Attached scsi generic sg4 type 0
  1183. [11118.112907] sd 10:0:0:0: [sdd] Attached SCSI removable disk
  1184. [11120.159812] sd 10:0:0:0: [sdd] 15523840 512-byte logical blocks: (7.95 GB/7.40 GiB)
  1185. [11120.173755]  sdd: sdd1 sdd2
  1186. [11120.666323] FAT-fs (sdd1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
  1187. [11120.683249] EXT4-fs (sdd2): recovery complete
  1188. [11120.683252] EXT4-fs (sdd2): mounted filesystem with ordered data mode. Opts: (null)
  1189. [11126.430429] sd 10:0:0:0: [sdd] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  1190. [11126.430434] sd 10:0:0:0: [sdd] tag#0 Sense Key : Not Ready [current]
  1191. [11126.430438] sd 10:0:0:0: [sdd] tag#0 Add. Sense: Medium not present
  1192. [11126.430442] sd 10:0:0:0: [sdd] tag#0 CDB: Read(10) 28 00 00 0c de 48 00 00 08 00
  1193. [11126.430444] blk_update_request: I/O error, dev sdd, sector 843336
  1194. [11126.432363] sd 10:0:0:0: [sdd] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  1195. [11126.432375] sd 10:0:0:0: [sdd] tag#0 Sense Key : Not Ready [current]
  1196. [11126.432378] sd 10:0:0:0: [sdd] tag#0 Add. Sense: Medium not present
  1197. [11126.432381] sd 10:0:0:0: [sdd] tag#0 CDB: Write(10) 2a 00 00 18 88 00 00 00 08 00
  1198. [11126.432383] blk_update_request: I/O error, dev sdd, sector 1607680
  1199. [11126.432387] Buffer I/O error on dev sdd2, logical block 196608, lost sync page write
  1200. [11126.432396] JBD2: Error -5 detected when updating journal superblock for sdd2-8.
  1201. [11126.432401] Aborting journal on device sdd2-8.
  1202. [11126.434240] sd 10:0:0:0: [sdd] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  1203. [11126.434242] sd 10:0:0:0: [sdd] tag#0 Sense Key : Not Ready [current]
  1204. [11126.434245] sd 10:0:0:0: [sdd] tag#0 Add. Sense: Medium not present
  1205. [11126.434247] sd 10:0:0:0: [sdd] tag#0 CDB: Write(10) 2a 00 00 18 88 00 00 00 08 00
  1206. [11126.434249] blk_update_request: I/O error, dev sdd, sector 1607680
  1207. [11126.434252] Buffer I/O error on dev sdd2, logical block 196608, lost sync page write
  1208. [11126.434259] JBD2: Error -5 detected when updating journal superblock for sdd2-8.
  1209. [11126.442359] EXT4-fs error (device sdd2): ext4_journal_check_start:56: Detected aborted journal
  1210. [11126.442363] EXT4-fs (sdd2): Remounting filesystem read-only
  1211. [11126.442366] EXT4-fs (sdd2): previous I/O error to superblock detected
  1212. [11258.196893] usb 6-1.7.1: USB disconnect, device number 6
  1213. [11258.504415] usb 6-1.7.1: new high-speed USB device number 7 using ehci-pci
  1214. [11258.620424] usb 6-1.7.1: New USB device found, idVendor=05e3, idProduct=0723
  1215. [11258.620427] usb 6-1.7.1: New USB device strings: Mfr=3, Product=4, SerialNumber=0
  1216. [11258.620429] usb 6-1.7.1: Product: USB Storage
  1217. [11258.620431] usb 6-1.7.1: Manufacturer: Generic
  1218. [11258.621328] usb-storage 6-1.7.1:1.0: USB Mass Storage device detected
  1219. [11258.621668] scsi host10: usb-storage 6-1.7.1:1.0
  1220. [11259.645945] scsi 10:0:0:0: Direct-Access     Generic  STORAGE DEVICE   9454 PQ: 0 ANSI: 0
  1221. [11259.646547] sd 10:0:0:0: Attached scsi generic sg4 type 0
  1222. [11259.648020] sd 10:0:0:0: [sdd] Attached SCSI removable disk
  1223. [11556.029958] sd 10:0:0:0: [sdd] 15523840 512-byte logical blocks: (7.95 GB/7.40 GiB)
  1224. [11556.043770]  sdd: sdd1 sdd2
  1225. [11556.497696] FAT-fs (sdd1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
  1226. [11556.513169] EXT4-fs (sdd2): recovery complete
  1227. [11556.513173] EXT4-fs (sdd2): mounted filesystem with ordered data mode. Opts: (null)
  1228. [11561.300642] sd 10:0:0:0: [sdd] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  1229. [11561.300646] sd 10:0:0:0: [sdd] tag#0 Sense Key : Not Ready [current]
  1230. [11561.300650] sd 10:0:0:0: [sdd] tag#0 Add. Sense: Medium not present
  1231. [11561.300654] sd 10:0:0:0: [sdd] tag#0 CDB: Read(10) 28 00 00 17 f8 00 00 00 20 00
  1232. [11561.300656] blk_update_request: I/O error, dev sdd, sector 1570816
  1233. [11561.302637] sd 10:0:0:0: [sdd] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  1234. [11561.302641] sd 10:0:0:0: [sdd] tag#0 Sense Key : Not Ready [current]
  1235. [11561.302644] sd 10:0:0:0: [sdd] tag#0 Add. Sense: Medium not present
  1236. [11561.302648] sd 10:0:0:0: [sdd] tag#0 CDB: Read(10) 28 00 00 17 f8 00 00 00 08 00
  1237. [11561.302650] blk_update_request: I/O error, dev sdd, sector 1570816
  1238. [11561.387468] JBD2: Error -5 detected when updating journal superblock for sdd2-8.
  1239. [11561.387472] Aborting journal on device sdd2-8.
  1240. [11561.387483] JBD2: Error -5 detected when updating journal superblock for sdd2-8.

Quellcode

Hier kannst du den Code kopieren und ihn in deinen bevorzugten Editor einfügen. Alternativ kannst du den gesamten Eintrag auch als Datei herunterladen.