SMART
von CountDracula- SNIPPET_DESC:
- https://debianforum.de/forum/viewtopic.php?f=32&t=171879
- SNIPPET_CREATION_TIME:
- 09.01.2019 15:13:56
- SNIPPET_PRUNE_TIME:
- Unendlich
- SNIPPET_TEXT:
-
- smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-38-generic] (local build)
- Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Device Model: WDC WDS500G1B0B-00AS40
- Serial Number: x45
- LU WWN Device Id: 5 001b44 8b46c4a69
- Firmware Version: X41100WD
- User Capacity: 500.107.862.016 bytes [500 GB]
- Sector Size: 512 bytes logical/physical
- Rotation Rate: Solid State Device
- Form Factor: M.2
- Device is: Not in smartctl database [for details use: -P showall]
- ATA Version is: ACS-2 T13/2015-D revision 3
- SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
- Local Time is: Wed Jan 9 08:05:38 2019 CET
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x00) Offline data collection activity
- was never started.
- Auto Offline Data Collection: Disabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: ( 0) seconds.
- Offline data collection
- capabilities: (0x11) SMART execute Offline immediate.
- No Auto Offline data collection support.
- Suspend Offline collection upon new
- command.
- No Offline surface scan supported.
- Self-test supported.
- No Conveyance Self-test supported.
- No Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: ( 10) minutes.
- SMART Attributes Data Structure revision number: 4
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 5 Reallocated_Sector_Ct 0x0032 100 100 --- Old_age Always - 0
- 9 Power_On_Hours 0x0032 100 100 --- Old_age Always - 12429
- 12 Power_Cycle_Count 0x0032 100 100 --- Old_age Always - 66
- 165 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 103178175740
- 166 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 2
- 167 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 40
- 168 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 46
- 169 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 434
- 170 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 0
- 171 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 0
- 172 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 0
- 173 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 17
- 174 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 16
- 184 End-to-End_Error 0x0032 100 100 --- Old_age Always - 0
- 187 Reported_Uncorrect 0x0032 100 100 --- Old_age Always - 0
- 188 Command_Timeout 0x0032 100 100 --- Old_age Always - 2
- 194 Temperature_Celsius 0x0022 073 069 --- Old_age Always - 27 (Min/Max 20/69)
- 199 UDMA_CRC_Error_Count 0x0032 100 100 --- Old_age Always - 0
- 230 Unknown_SSD_Attribute 0x0032 100 100 --- Old_age Always - 3573449098048
- 232 Available_Reservd_Space 0x0033 100 100 004 Pre-fail Always - 100
- 233 Media_Wearout_Indicator 0x0032 100 100 --- Old_age Always - 8869
- 234 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 13860
- 241 Total_LBAs_Written 0x0030 253 253 --- Old_age Offline - 6997
- 242 Total_LBAs_Read 0x0030 253 253 --- Old_age Offline - 8442
- 244 Unknown_Attribute 0x0032 000 100 --- Old_age Always - 0
- SMART Error Log Version: 1
- No Errors Logged
- SMART Self-test log structure revision number 1
- No self-tests have been logged. [To run self-tests, use: smartctl -t]
- Selective Self-tests/Logging not supported
- smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-38-generic] (local build)
- Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Device Model: WDC WDS500G1B0B-00AS40
- Serial Number: x77
- LU WWN Device Id: 5 001b44 8b494f6fe
- Firmware Version: X41100WD
- User Capacity: 500.107.862.016 bytes [500 GB]
- Sector Size: 512 bytes logical/physical
- Rotation Rate: Solid State Device
- Form Factor: M.2
- Device is: Not in smartctl database [for details use: -P showall]
- ATA Version is: ACS-2 T13/2015-D revision 3
- SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
- Local Time is: Wed Jan 9 08:05:38 2019 CET
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x00) Offline data collection activity
- was never started.
- Auto Offline Data Collection: Disabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: ( 0) seconds.
- Offline data collection
- capabilities: (0x11) SMART execute Offline immediate.
- No Auto Offline data collection support.
- Suspend Offline collection upon new
- command.
- No Offline surface scan supported.
- Self-test supported.
- No Conveyance Self-test supported.
- No Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: ( 10) minutes.
- SMART Attributes Data Structure revision number: 4
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 5 Reallocated_Sector_Ct 0x0032 100 100 --- Old_age Always - 0
- 9 Power_On_Hours 0x0032 100 100 --- Old_age Always - 12726
- 12 Power_Cycle_Count 0x0032 100 100 --- Old_age Always - 68
- 165 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 8676312209
- 166 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 1
- 167 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 18
- 168 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 32
- 169 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 247
- 170 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 0
- 171 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 0
- 172 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 0
- 173 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 14
- 174 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 17
- 184 End-to-End_Error 0x0032 100 100 --- Old_age Always - 0
- 187 Reported_Uncorrect 0x0032 100 100 --- Old_age Always - 0
- 188 Command_Timeout 0x0032 100 100 --- Old_age Always - 2
- 194 Temperature_Celsius 0x0022 073 074 --- Old_age Always - 27 (Min/Max 20/74)
- 199 UDMA_CRC_Error_Count 0x0032 100 100 --- Old_age Always - 0
- 230 Unknown_SSD_Attribute 0x0032 100 100 --- Old_age Always - 3444597326626
- 232 Available_Reservd_Space 0x0033 100 100 004 Pre-fail Always - 100
- 233 Media_Wearout_Indicator 0x0032 100 100 --- Old_age Always - 7405
- 234 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 12701
- 241 Total_LBAs_Written 0x0030 253 253 --- Old_age Offline - 6666
- 242 Total_LBAs_Read 0x0030 253 253 --- Old_age Offline - 7912
- 244 Unknown_Attribute 0x0032 000 100 --- Old_age Always - 0
- SMART Error Log Version: 1
- No Errors Logged
- SMART Self-test log structure revision number 1
- No self-tests have been logged. [To run self-tests, use: smartctl -t]
- Selective Self-tests/Logging not supported
- smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-38-generic] (local build)
- Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Model Family: Seagate NAS HDD
- Device Model: ST4000VN000-1H4168
- Serial Number: xL8
- LU WWN Device Id: 5 000c50 087bc8f4a
- Firmware Version: SC46
- User Capacity: 4.000.787.030.016 bytes [4,00 TB]
- Sector Sizes: 512 bytes logical, 4096 bytes physical
- Rotation Rate: 5900 rpm
- Form Factor: 3.5 inches
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b
- SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
- Local Time is: Wed Jan 9 08:05:01 2019 CET
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x82) Offline data collection activity
- was completed without error.
- Auto Offline Data Collection: Enabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: ( 107) seconds.
- Offline data collection
- capabilities: (0x7b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 1) minutes.
- Extended self-test routine
- recommended polling time: ( 491) minutes.
- Conveyance self-test routine
- recommended polling time: ( 2) minutes.
- SCT capabilities: (0x10bd) SCT Status supported.
- SCT Error Recovery Control supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 10
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 1 Raw_Read_Error_Rate 0x000f 118 099 006 Pre-fail Always - 194362280
- 3 Spin_Up_Time 0x0003 093 092 000 Pre-fail Always - 0
- 4 Start_Stop_Count 0x0032 097 097 020 Old_age Always - 3279
- 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
- 7 Seek_Error_Rate 0x000f 080 060 030 Pre-fail Always - 111665439
- 9 Power_On_Hours 0x0032 076 076 000 Old_age Always - 21394
- 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
- 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 128
- 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
- 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
- 188 Command_Timeout 0x0032 095 091 000 Old_age Always - 2040140595677
- 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
- 190 Airflow_Temperature_Cel 0x0022 083 063 045 Old_age Always - 17 (Min/Max 16/29)
- 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
- 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 45
- 193 Load_Cycle_Count 0x0032 099 099 000 Old_age Always - 3280
- 194 Temperature_Celsius 0x0022 017 040 000 Old_age Always - 17 (0 12 0 0 0)
- 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
- 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
- 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
- SMART Error Log Version: 1
- No Errors Logged
- SMART Self-test log structure revision number 1
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Short offline Completed without error 00% 3223 -
- # 2 Short offline Completed without error 00% 3223 -
- # 3 Short offline Completed without error 00% 3223 -
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
- smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-38-generic] (local build)
- Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Model Family: Seagate NAS HDD
- Device Model: ST4000VN000-1H4168
- Serial Number: xBX
- LU WWN Device Id: 5 000c50 087bc89af
- Firmware Version: SC46
- User Capacity: 4.000.787.030.016 bytes [4,00 TB]
- Sector Sizes: 512 bytes logical, 4096 bytes physical
- Rotation Rate: 5900 rpm
- Form Factor: 3.5 inches
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b
- SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
- Local Time is: Wed Jan 9 08:05:11 2019 CET
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x82) Offline data collection activity
- was completed without error.
- Auto Offline Data Collection: Enabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: ( 117) seconds.
- Offline data collection
- capabilities: (0x7b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 1) minutes.
- Extended self-test routine
- recommended polling time: ( 524) minutes.
- Conveyance self-test routine
- recommended polling time: ( 2) minutes.
- SCT capabilities: (0x10bd) SCT Status supported.
- SCT Error Recovery Control supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 10
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 1 Raw_Read_Error_Rate 0x000f 116 099 006 Pre-fail Always - 110393928
- 3 Spin_Up_Time 0x0003 093 092 000 Pre-fail Always - 0
- 4 Start_Stop_Count 0x0032 097 097 020 Old_age Always - 3295
- 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
- 7 Seek_Error_Rate 0x000f 080 060 030 Pre-fail Always - 113228564
- 9 Power_On_Hours 0x0032 076 076 000 Old_age Always - 21395
- 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
- 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 128
- 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
- 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
- 188 Command_Timeout 0x0032 095 089 000 Old_age Always - 3208389526253
- 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
- 190 Airflow_Temperature_Cel 0x0022 083 062 045 Old_age Always - 17 (Min/Max 17/28)
- 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
- 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 47
- 193 Load_Cycle_Count 0x0032 099 099 000 Old_age Always - 3296
- 194 Temperature_Celsius 0x0022 017 040 000 Old_age Always - 17 (0 12 0 0 0)
- 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
- 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
- 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
- SMART Error Log Version: 1
- No Errors Logged
- SMART Self-test log structure revision number 1
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Short offline Completed without error 00% 3223 -
- # 2 Short offline Completed without error 00% 3223 -
- # 3 Short offline Completed without error 00% 3223 -
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
- smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-38-generic] (local build)
- Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Model Family: Seagate NAS HDD
- Device Model: ST4000VN000-1H4168
- Serial Number: xC1
- LU WWN Device Id: 5 000c50 087bcd713
- Firmware Version: SC46
- User Capacity: 4.000.787.030.016 bytes [4,00 TB]
- Sector Sizes: 512 bytes logical, 4096 bytes physical
- Rotation Rate: 5900 rpm
- Form Factor: 3.5 inches
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b
- SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
- Local Time is: Wed Jan 9 08:05:20 2019 CET
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x82) Offline data collection activity
- was completed without error.
- Auto Offline Data Collection: Enabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: ( 97) seconds.
- Offline data collection
- capabilities: (0x7b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 1) minutes.
- Extended self-test routine
- recommended polling time: ( 507) minutes.
- Conveyance self-test routine
- recommended polling time: ( 2) minutes.
- SCT capabilities: (0x10bd) SCT Status supported.
- SCT Error Recovery Control supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 10
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 1 Raw_Read_Error_Rate 0x000f 117 099 006 Pre-fail Always - 137171584
- 3 Spin_Up_Time 0x0003 093 092 000 Pre-fail Always - 0
- 4 Start_Stop_Count 0x0032 097 097 020 Old_age Always - 3193
- 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
- 7 Seek_Error_Rate 0x000f 079 060 030 Pre-fail Always - 84798283
- 9 Power_On_Hours 0x0032 076 076 000 Old_age Always - 21394
- 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
- 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 128
- 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
- 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
- 188 Command_Timeout 0x0032 095 091 000 Old_age Always - 2478233944643
- 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
- 190 Airflow_Temperature_Cel 0x0022 083 063 045 Old_age Always - 17 (Min/Max 16/28)
- 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
- 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 45
- 193 Load_Cycle_Count 0x0032 099 099 000 Old_age Always - 3194
- 194 Temperature_Celsius 0x0022 017 040 000 Old_age Always - 17 (0 12 0 0 0)
- 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
- 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
- 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
- SMART Error Log Version: 1
- No Errors Logged
- SMART Self-test log structure revision number 1
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Short offline Completed without error 00% 3223 -
- # 2 Short offline Completed without error 00% 3223 -
- # 3 Short offline Completed without error 00% 3223 -
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
- smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-38-generic] (local build)
- Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Model Family: Seagate NAS HDD
- Device Model: ST4000VN000-1H4168
- Serial Number: xQG
- LU WWN Device Id: 5 000c50 087c1a3c7
- Firmware Version: SC46
- User Capacity: 4.000.787.030.016 bytes [4,00 TB]
- Sector Sizes: 512 bytes logical, 4096 bytes physical
- Rotation Rate: 5900 rpm
- Form Factor: 3.5 inches
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b
- SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
- Local Time is: Wed Jan 9 08:05:29 2019 CET
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x82) Offline data collection activity
- was completed without error.
- Auto Offline Data Collection: Enabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: ( 107) seconds.
- Offline data collection
- capabilities: (0x7b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 1) minutes.
- Extended self-test routine
- recommended polling time: ( 487) minutes.
- Conveyance self-test routine
- recommended polling time: ( 2) minutes.
- SCT capabilities: (0x10bd) SCT Status supported.
- SCT Error Recovery Control supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 10
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 1 Raw_Read_Error_Rate 0x000f 111 099 006 Pre-fail Always - 35300816
- 3 Spin_Up_Time 0x0003 093 092 000 Pre-fail Always - 0
- 4 Start_Stop_Count 0x0032 097 097 020 Old_age Always - 3187
- 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
- 7 Seek_Error_Rate 0x000f 079 060 030 Pre-fail Always - 85349177
- 9 Power_On_Hours 0x0032 076 076 000 Old_age Always - 21393
- 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
- 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 128
- 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
- 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
- 188 Command_Timeout 0x0032 095 093 000 Old_age Always - 1975715103184
- 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
- 190 Airflow_Temperature_Cel 0x0022 083 062 045 Old_age Always - 17 (Min/Max 17/29)
- 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
- 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 45
- 193 Load_Cycle_Count 0x0032 099 099 000 Old_age Always - 3188
- 194 Temperature_Celsius 0x0022 017 040 000 Old_age Always - 17 (0 12 0 0 0)
- 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
- 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
- 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
- SMART Error Log Version: 1
- No Errors Logged
- SMART Self-test log structure revision number 1
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Short offline Completed without error 00% 3223 -
- # 2 Short offline Completed without error 00% 3223 -
- # 3 Short offline Completed without error 00% 3223 -
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
Quellcode
Hier kannst du den Code kopieren und ihn in deinen bevorzugten Editor einfügen. PASTEBIN_DOWNLOAD_SNIPPET_EXPLAIN