debianforum.de

smb

SNIPPET_DESC:

smb

SNIPPET_CREATION_TIME:

05.02.2019 09:16:20

SNIPPET_PRUNE_TIME:

Unendlich

SNIPPET_TEXT:

1. #
2. # Sample configuration file for the Samba suite for Debian GNU/Linux.
3. #
4. #
5. # This is the main Samba configuration file. You should read the
6. # smb.conf(5) manual page in order to understand the options listed
7. # here. Samba has a huge number of configurable options most of which
8. # are not shown in this example
9. #
10. # Some options that are often worth tuning have been included as
11. # commented-out examples in this file.
12. #  - When such options are commented with ";", the proposed setting
13. #    differs from the default Samba behaviour
14. #  - When commented with "#", the proposed setting is the default
15. #    behaviour of Samba but the option is considered important
16. #    enough to be mentioned here
17. #
18. # NOTE: Whenever you modify this file you should run the command
19. # "testparm" to check that you have not made any basic syntactic
20. # errors.
21.  
22. #======================= Global Settings =======================
23.  
24. [global]
25.  
26. ## Browsing/Identification ###
27.  
28. # Change this to the workgroup/NT-domain name your Samba server will part of
29.   workgroup = WORKGROUP
30.  
31. #### Networking ####
32.  
33. # The specific set of interfaces / networks to bind to
34. # This can be either the interface name or an IP address/netmask;
35. # interface names are normally preferred
36. ;   interfaces = 127.0.0.0/8 eth0
37.  
38. # Only bind to the named interfaces and/or networks; you must use the
39. # 'interfaces' option above to use this.
40. # It is recommended that you enable this feature if your Samba machine is
41. # not protected by a firewall or is a firewall itself.  However, this
42. # option cannot handle dynamic or non-broadcast interfaces correctly.
43. ;   bind interfaces only = yes
44.  
45.  
46.  
47. #### Debugging/Accounting ####
48.  
49. # This tells Samba to use a separate log file for each machine
50. # that connects
51.   log file = /var/log/samba/log.%m
52.  
53. # Cap the size of the individual log files (in KiB).
54.   max log size = 1000
55.  
56. # We want Samba to only log to /var/log/samba/log.{smbd,nmbd}.
57. # Append syslog@1 if you want important messages to be sent to syslog too.
58.   logging = file
59.  
60. # Do something sensible when Samba crashes: mail the admin a backtrace
61.   panic action = /usr/share/samba/panic-action %d
62.  
63.  
64. ####### Authentication #######
65.  
66. # Server role. Defines in which mode Samba will operate. Possible
67. # values are "standalone server", "member server", "classic primary
68. # domain controller", "classic backup domain controller", "active
69. # directory domain controller".
70. #
71. # Most people will want "standalone server" or "member server".
72. # Running as "active directory domain controller" will require first
73. # running "samba-tool domain provision" to wipe databases and create a
74. # new domain.
75.   server role = standalone server
76.  
77.    obey pam restrictions = yes
78.  
79. # This boolean parameter controls whether Samba attempts to sync the Unix
80. # password with the SMB password when the encrypted SMB password in the
81. # passdb is changed.
82.   unix password sync = yes
83.  
84. # For Unix password sync to work on a Debian GNU/Linux system, the following
85. # parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
86. # sending the correct chat script for the passwd program in Debian Sarge).
87.   passwd program = /usr/bin/passwd %u
88.    passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .
89.  
90. # This boolean controls whether PAM will be used for password changes
91. # when requested by an SMB client instead of the program listed in
92. # 'passwd program'. The default is 'no'.
93.   pam password change = yes
94.  
95. # This option controls how unsuccessful authentication attempts are mapped
96. # to anonymous connections
97.   map to guest = bad user
98.  
99. ########## Domains ###########
100.  
101. #
102. # The following settings only takes effect if 'server role = primary
103. # classic domain controller', 'server role = backup domain controller'
104. # or 'domain logons' is set
105. #
106.  
107. # It specifies the location of the user's
108. # profile directory from the client point of view) The following
109. # required a [profiles] share to be setup on the samba server (see
110. # below)
111. ;   logon path = \\%N\profiles\%U
112. # Another common choice is storing the profile in the user's home directory
113. # (this is Samba's default)
114. #   logon path = \\%N\%U\profile
115.  
116. # The following setting only takes effect if 'domain logons' is set
117. # It specifies the location of a user's home directory (from the client
118. # point of view)
119. ;   logon drive = H:
120. #   logon home = \\%N\%U
121.  
122. # The following setting only takes effect if 'domain logons' is set
123. # It specifies the script to run during logon. The script must be stored
124. # in the [netlogon] share
125. # NOTE: Must be store in 'DOS' file format convention
126. ;   logon script = logon.cmd
127.  
128. # This allows Unix users to be created on the domain controller via the SAMR
129. # RPC pipe.  The example command creates a user account with a disabled Unix
130. # password; please adapt to your needs
131. ; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u
132.  
133. # This allows machine accounts to be created on the domain controller via the
134. # SAMR RPC pipe.  
135. # The following assumes a "machines" group exists on the system
136. ; add machine script  = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u
137.  
138. # This allows Unix groups to be created on the domain controller via the SAMR
139. # RPC pipe.  
140. ; add group script = /usr/sbin/addgroup --force-badname %g
141.  
142. ############ Misc ############
143.  
144. # Using the following line enables you to customise your configuration
145. # on a per machine basis. The %m gets replaced with the netbios name
146. # of the machine that is connecting
147. ;   include = /home/samba/etc/smb.conf.%m
148.  
149. # Some defaults for winbind (make sure you're not using the ranges
150. # for something else.)
151. ;   idmap config * :              backend = tdb
152. ;   idmap config * :              range   = 3000-7999
153. ;   idmap config YOURDOMAINHERE : backend = tdb
154. ;   idmap config YOURDOMAINHERE : range   = 100000-999999
155. ;   template shell = /bin/bash
156.  
157. # Setup usershare options to enable non-root users to share folders
158. # with the net usershare command.
159.  
160. # Maximum number of usershare. 0 means that usershare is disabled.
161. #   usershare max shares = 100
162.  
163. # Allow users who've been granted usershare privileges to create
164. # public shares, not just authenticated ones
165.   usershare allow guests = yes
166.  
167. #======================= Share Definitions =======================
168.  
169. [homes]
170.    comment = Home Directories
171.    browseable = no
172.  
173. # By default, the home directories are exported read-only. Change the
174. # next parameter to 'no' if you want to be able to write to them.
175.   read only = yes
176.  
177. # File creation mask is set to 0700 for security reasons. If you want to
178. # create files with group=rw permissions, set next parameter to 0775.
179.   create mask = 0700
180.  
181. # Directory creation mask is set to 0700 for security reasons. If you want to
182. # create dirs. with group=rw permissions, set next parameter to 0775.
183.   directory mask = 0700
184.  
185. # By default, \\server\username shares can be connected to by anyone
186. # with access to the samba server.
187. # The following parameter makes sure that only "username" can connect
188. # to \\server\username
189. # This might need tweaking when using external authentication schemes
190.   valid users = %S
191.  
192. # Un-comment the following and create the netlogon directory for Domain Logons
193. # (you need to configure Samba to act as a domain controller too.)
194. ;[netlogon]
195. ;   comment = Network Logon Service
196. ;   path = /home/samba/netlogon
197. ;   guest ok = yes
198. ;   read only = yes
199.  
200. # Un-comment the following and create the profiles directory to store
201. # users profiles (see the "logon path" option above)
202. # (you need to configure Samba to act as a domain controller too.)
203. # The path below should be writable by all users so that their
204. # profile directory may be created the first time they log on
205. ;[profiles]
206. ;   comment = Users profiles
207. ;   path = /home/samba/profiles
208. ;   guest ok = no
209. ;   browseable = no
210. ;   create mask = 0600
211. ;   directory mask = 0700
212.  
213. [printers]
214.    comment = All Printers
215.    browseable = no
216.    path = /var/spool/samba
217.    printable = yes
218.    guest ok = no
219.    read only = yes
220.    create mask = 0700
221.  
222. # Windows clients look for this share name as a source of downloadable
223. # printer drivers
224. [print$]
225.    comment = Printer Drivers
226.    path = /var/lib/samba/printers
227.    browseable = yes
228.    read only = yes
229.    guest ok = no
230. # Uncomment to allow remote administration of Windows print drivers.
231. # You may need to replace 'lpadmin' with the name of the group your
232. # admin users are members of.
233. # Please note that you also need to set appropriate Unix permissions
234. # to the drivers directory for these users to have write rights in it
235. ;   write list = root, @lpadmin

Quellcode

Hier kannst du den Code kopieren und ihn in deinen bevorzugten Editor einfügen. PASTEBIN_DOWNLOAD_SNIPPET_EXPLAIN