NoPaste

/dev/sda

von unix1988
SNIPPET_DESC:
ssd
SNIPPET_CREATION_TIME:
15.03.2019 21:14:30
SNIPPET_PRUNE_TIME:
Unendlich

SNIPPET_TEXT:
  1. smartctl 6.6 2017-11-05 r4594 [x86_64-linux-5.0.2] (local build)
  2. Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org
  3.  
  4. === START OF INFORMATION SECTION ===
  5. Model Family:     Crucial/Micron RealSSD m4/C400/P400
  6. Device Model:     C400-MTFDDAK512MAM
  7. Serial Number:    0000000013050928D404
  8. LU WWN Device Id: 5 00a075 10928d404
  9. Firmware Version: 04TH
  10. User Capacity:    512.110.190.592 bytes [512 GB]
  11. Sector Size:      512 bytes logical/physical
  12. Rotation Rate:    Solid State Device
  13. Form Factor:      2.5 inches
  14. Device is:        In smartctl database [for details use: -P show]
  15. ATA Version is:   ACS-2, ATA8-ACS T13/1699-D revision 6
  16. SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
  17. Local Time is:    Fri Mar 15 21:12:16 2019 CET
  18. SMART support is: Available - device has SMART capability.
  19. SMART support is: Enabled
  20.  
  21. === START OF READ SMART DATA SECTION ===
  22. SMART overall-health self-assessment test result: PASSED
  23.  
  24. General SMART Values:
  25. Offline data collection status:  (0x80) Offline data collection activity
  26.                                         was never started.
  27.                                         Auto Offline Data Collection: Enabled.
  28. Self-test execution status:      ( 121) The previous self-test completed having
  29.                                         the read element of the test failed.
  30. Total time to complete Offline
  31. data collection:                ( 2380) seconds.
  32. Offline data collection
  33. capabilities:                    (0x7b) SMART execute Offline immediate.
  34.                                         Auto Offline data collection on/off support.
  35.                                         Suspend Offline collection upon new
  36.                                         command.
  37.                                         Offline surface scan supported.
  38.                                         Self-test supported.
  39.                                         Conveyance Self-test supported.
  40.                                         Selective Self-test supported.
  41. SMART capabilities:            (0x0003) Saves SMART data before entering
  42.                                         power-saving mode.
  43.                                         Supports SMART auto save timer.
  44. Error logging capability:        (0x01) Error logging supported.
  45.                                         General Purpose Logging supported.
  46. Short self-test routine
  47. recommended polling time:        (   2) minutes.
  48. Extended self-test routine
  49. recommended polling time:        (  39) minutes.
  50. Conveyance self-test routine
  51. recommended polling time:        (   3) minutes.
  52. SCT capabilities:              (0x003d) SCT Status supported.
  53.                                         SCT Error Recovery Control supported.
  54.                                         SCT Feature Control supported.
  55.                                         SCT Data Table supported.
  56.  
  57.  
  58. SMART Attributes Data Structure revision number: 16
  59. Vendor Specific SMART Attributes with Thresholds:
  60. ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  61.   1 Raw_Read_Error_Rate     0x002f   100   100   050    Pre-fail  Always       -       1
  62.   5 Reallocated_Sector_Ct   0x0033   100   100   010    Pre-fail  Always       -       0
  63.   9 Power_On_Hours          0x0032   100   100   001    Old_age   Always       -       7356
  64.  12 Power_Cycle_Count       0x0032   100   100   001    Old_age   Always       -       1635
  65. 170 Grown_Failing_Block_Ct  0x0033   100   100   010    Pre-fail  Always       -       0
  66. 171 Program_Fail_Count      0x0032   100   100   001    Old_age   Always       -       0
  67. 172 Erase_Fail_Count        0x0032   100   100   001    Old_age   Always       -       0
  68. 173 Wear_Leveling_Count     0x0033   099   099   010    Pre-fail  Always       -       55
  69. 174 Unexpect_Power_Loss_Ct  0x0032   100   100   001    Old_age   Always       -       198
  70. 181 Non4k_Aligned_Access    0x0022   100   100   001    Old_age   Always       -       3662 512 3149
  71. 183 SATA_Iface_Downshift    0x0032   100   100   001    Old_age   Always       -       0
  72. 184 End-to-End_Error        0x0033   100   100   050    Pre-fail  Always       -       0
  73. 187 Reported_Uncorrect      0x0032   100   100   001    Old_age   Always       -       50
  74. 188 Command_Timeout         0x0032   100   100   001    Old_age   Always       -       0
  75. 189 Factory_Bad_Block_Ct    0x000e   100   100   001    Old_age   Always       -       174
  76. 194 Temperature_Celsius     0x0022   100   100   000    Old_age   Always       -       0
  77. 195 Hardware_ECC_Recovered  0x003a   100   100   001    Old_age   Always       -       1666
  78. 196 Reallocated_Event_Count 0x0032   100   100   001    Old_age   Always       -       0
  79. 197 Current_Pending_Sector  0x0032   100   100   001    Old_age   Always       -       0
  80. 198 Offline_Uncorrectable   0x0030   100   100   001    Old_age   Offline      -       0
  81. 199 UDMA_CRC_Error_Count    0x0032   100   100   001    Old_age   Always       -       0
  82. 202 Perc_Rated_Life_Used    0x0018   099   099   001    Old_age   Offline      -       1
  83. 206 Write_Error_Rate        0x000e   100   100   001    Old_age   Always       -       0
  84.  
  85. SMART Error Log Version: 1
  86. ATA Error Count: 0
  87.         CR = Command Register [HEX]
  88.         FR = Features Register [HEX]
  89.         SC = Sector Count Register [HEX]
  90.         SN = Sector Number Register [HEX]
  91.         CL = Cylinder Low Register [HEX]
  92.         CH = Cylinder High Register [HEX]
  93.         DH = Device/Head Register [HEX]
  94.         DC = Device Command Register [HEX]
  95.         ER = Error register [HEX]
  96.         ST = Status register [HEX]
  97. Powered_Up_Time is measured from power on, and printed as
  98. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  99. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  100.  
  101. Error 0 occurred at disk power-on lifetime: 7323 hours (305 days + 3 hours)
  102.   When the command that caused the error occurred, the device was active or idle.
  103.  
  104.   After command completion occurred, registers were:
  105.   ER ST SC SN CL CH DH
  106.   -- -- -- -- -- -- --
  107.   00 50 10 10 d7 58 40   at LBA = 0x0058d710 = 5822224
  108.  
  109.   Commands leading to the command that caused the error were:
  110.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  111.   -- -- -- -- -- -- -- --  ----------------  --------------------
  112.   61 00 10 10 d7 58 40 00   6d+20:50:16.224  WRITE FPDMA QUEUED
  113.   61 00 10 08 80 21 40 00   6d+20:50:16.224  WRITE FPDMA QUEUED
  114.   61 00 08 00 80 21 40 00   6d+20:50:16.224  WRITE FPDMA QUEUED
  115.   61 00 08 30 cf 3b 40 00   6d+20:50:16.224  WRITE FPDMA QUEUED
  116.   61 00 18 a0 30 3b 40 00   6d+20:50:16.224  WRITE FPDMA QUEUED
  117.  
  118. Error -1 occurred at disk power-on lifetime: 7317 hours (304 days + 21 hours)
  119.   When the command that caused the error occurred, the device was active or idle.
  120.   After command completion occurred, registers were:
  121.   ER ST SC SN CL CH DH
  122.   -- -- -- -- -- -- --
  123.   00 50 08 10 47 1c 40   at LBA = 0x001c4710 = 1853200
  124.  
  125.   Commands leading to the command that caused the error were:
  126.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  127.   -- -- -- -- -- -- -- --  ----------------  --------------------
  128.   60 03 08 10 47 1c 40 00   6d+15:30:16.224  READ FPDMA QUEUED
  129.   60 00 08 70 0d b3 40 00   6d+15:30:16.224  READ FPDMA QUEUED
  130.   60 10 08 00 0d b3 40 00   6d+15:30:16.224  READ FPDMA QUEUED
  131.   60 00 10 d8 09 b4 40 00   6d+15:30:16.224  READ FPDMA QUEUED
  132.   60 00 00 00 a0 4d 40 00   6d+15:30:16.224  READ FPDMA QUEUED
  133.  
  134. Error -2 occurred at disk power-on lifetime: 7317 hours (304 days + 21 hours)
  135.   When the command that caused the error occurred, the device was active or idle.
  136.  
  137.   After command completion occurred, registers were:
  138.   ER ST SC SN CL CH DH
  139.   -- -- -- -- -- -- --
  140.   00 50 00 10 47 1c 40   at LBA = 0x001c4710 = 1853200
  141.  
  142.   Commands leading to the command that caused the error were:
  143.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  144.   -- -- -- -- -- -- -- --  ----------------  --------------------
  145.   60 00 00 68 f2 4d 40 00   6d+15:30:16.224  READ FPDMA QUEUED
  146.   60 03 08 10 47 1c 40 00   6d+15:30:16.224  READ FPDMA QUEUED
  147.   60 00 e0 20 d0 0d 40 00   6d+15:30:16.224  READ FPDMA QUEUED
  148.   60 10 10 48 0c b3 40 00   6d+15:30:16.224  READ FPDMA QUEUED
  149.   60 00 38 08 0c b3 40 00   6d+15:30:16.224  READ FPDMA QUEUED
  150.  
  151. Error -3 occurred at disk power-on lifetime: 7317 hours (304 days + 21 hours)
  152.   When the command that caused the error occurred, the device was active or idle.
  153.  
  154.   After command completion occurred, registers were:
  155.   ER ST SC SN CL CH DH
  156.   -- -- -- -- -- -- --
  157.   00 50 08 10 47 1c 40   at LBA = 0x001c4710 = 1853200
  158.  
  159.   Commands leading to the command that caused the error were:
  160.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  161.   -- -- -- -- -- -- -- --  ----------------  --------------------
  162.   60 00 08 10 47 1c 40 00   6d+15:30:16.224  READ FPDMA QUEUED
  163.   60 00 f8 b0 c1 04 40 00   6d+15:30:16.224  READ FPDMA QUEUED
  164.   60 00 20 98 59 16 40 00   6d+15:30:16.224  READ FPDMA QUEUED
  165.   60 10 00 00 54 04 40 00   6d+15:30:16.224  READ FPDMA QUEUED
  166.   60 00 90 88 d3 0d 40 00   6d+15:30:16.224  READ FPDMA QUEUED
  167.  
  168. Error -4 occurred at disk power-on lifetime: 7317 hours (304 days + 21 hours)
  169.   When the command that caused the error occurred, the device was active or idle.
  170.  
  171.   After command completion occurred, registers were:
  172.   ER ST SC SN CL CH DH
  173.   -- -- -- -- -- -- --
  174.   00 50 80 18 47 1c 40   at LBA = 0x001c4718 = 1853208
  175.   Commands leading to the command that caused the error were:
  176.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  177.   -- -- -- -- -- -- -- --  ----------------  --------------------
  178.   60 00 80 38 09 b4 40 00   6d+15:30:16.224  READ FPDMA QUEUED
  179.   60 00 70 c0 08 b4 40 00   6d+15:30:16.224  READ FPDMA QUEUED
  180.   60 10 18 b8 69 e6 40 00   6d+15:30:16.224  READ FPDMA QUEUED
  181.   60 00 08 98 69 e6 40 00   6d+15:30:16.224  READ FPDMA QUEUED
  182.   60 00 58 30 69 e6 40 00   6d+15:30:16.224  READ FPDMA QUEUED
  183.  
  184. SMART Self-test log structure revision number 1
  185. Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
  186. # 1  Extended offline    Completed: read failure       90%      7356         19356464
  187. # 2  Extended offline    Completed: read failure       90%      7349         19356464
  188. # 3  Extended offline    Completed: read failure       90%      7342         19356464
  189. # 4  Extended offline    Completed: read failure       90%      7335         19356464
  190. # 5  Extended offline    Completed: read failure       90%      7309         19356464
  191. # 6  Extended offline    Completed: read failure       90%      7292         19356464
  192. # 7  Extended offline    Completed: read failure       90%      7286         19356464
  193. # 8  Extended offline    Completed: read failure       90%      7286         19356464
  194. # 9  Extended offline    Completed: read failure       90%      7286         19356464
  195. #10  Extended offline    Completed: read failure       90%      7276         19356464
  196. #11  Extended offline    Completed: read failure       90%      7271         19356464
  197. #12  Extended offline    Completed: read failure       90%      7264         19356464
  198. #13  Extended offline    Completed without error       00%      7242         -
  199. #14  Extended offline    Completed without error       00%      7166         -
  200. #15  Extended offline    Completed without error       00%      7162         -
  201. #16  Extended offline    Completed without error       00%      7157         -
  202. #17  Extended offline    Completed without error       00%      7154         -
  203. #18  Extended offline    Completed without error       00%      7151         -
  204. #19  Extended offline    Completed without error       00%      6984         -
  205. #20  Extended offline    Completed without error       00%      6820         -
  206. #21  Extended offline    Completed without error       00%      6807         -
  207.  
  208. SMART Selective self-test log data structure revision number 1
  209.  SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
  210.     1        0        0  Not_testing
  211.     2        0        0  Not_testing
  212.     3        0        0  Not_testing
  213.     4        0        0  Not_testing
  214.     5        0        0  Not_testing
  215. Selective self-test flags (0x0):
  216.   After scanning selected spans, do NOT read-scan remainder of disk.
  217. If Selective self-test is pending on power-up, resume after 0 minute delay.

Quellcode

Hier kannst du den Code kopieren und ihn in deinen bevorzugten Editor einfügen. PASTEBIN_DOWNLOAD_SNIPPET_EXPLAIN

Verlinken

URL: alles markieren
https://nopaste.debianforum.de/40661

BBCode: alles markieren
[NP]40661[/NP]

LATEST_SNIPPETS