/dev/sda
von unix1988- SNIPPET_DESC:
- ssd
- SNIPPET_CREATION_TIME:
- 15.03.2019 21:14:30
- SNIPPET_PRUNE_TIME:
- Unendlich
- SNIPPET_TEXT:
-
- smartctl 6.6 2017-11-05 r4594 [x86_64-linux-5.0.2] (local build)
- Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Model Family: Crucial/Micron RealSSD m4/C400/P400
- Device Model: C400-MTFDDAK512MAM
- Serial Number: 0000000013050928D404
- LU WWN Device Id: 5 00a075 10928d404
- Firmware Version: 04TH
- User Capacity: 512.110.190.592 bytes [512 GB]
- Sector Size: 512 bytes logical/physical
- Rotation Rate: Solid State Device
- Form Factor: 2.5 inches
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 6
- SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
- Local Time is: Fri Mar 15 21:12:16 2019 CET
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x80) Offline data collection activity
- was never started.
- Auto Offline Data Collection: Enabled.
- Self-test execution status: ( 121) The previous self-test completed having
- the read element of the test failed.
- Total time to complete Offline
- data collection: ( 2380) seconds.
- Offline data collection
- capabilities: (0x7b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: ( 39) minutes.
- Conveyance self-test routine
- recommended polling time: ( 3) minutes.
- SCT capabilities: (0x003d) SCT Status supported.
- SCT Error Recovery Control supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 1 Raw_Read_Error_Rate 0x002f 100 100 050 Pre-fail Always - 1
- 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
- 9 Power_On_Hours 0x0032 100 100 001 Old_age Always - 7356
- 12 Power_Cycle_Count 0x0032 100 100 001 Old_age Always - 1635
- 170 Grown_Failing_Block_Ct 0x0033 100 100 010 Pre-fail Always - 0
- 171 Program_Fail_Count 0x0032 100 100 001 Old_age Always - 0
- 172 Erase_Fail_Count 0x0032 100 100 001 Old_age Always - 0
- 173 Wear_Leveling_Count 0x0033 099 099 010 Pre-fail Always - 55
- 174 Unexpect_Power_Loss_Ct 0x0032 100 100 001 Old_age Always - 198
- 181 Non4k_Aligned_Access 0x0022 100 100 001 Old_age Always - 3662 512 3149
- 183 SATA_Iface_Downshift 0x0032 100 100 001 Old_age Always - 0
- 184 End-to-End_Error 0x0033 100 100 050 Pre-fail Always - 0
- 187 Reported_Uncorrect 0x0032 100 100 001 Old_age Always - 50
- 188 Command_Timeout 0x0032 100 100 001 Old_age Always - 0
- 189 Factory_Bad_Block_Ct 0x000e 100 100 001 Old_age Always - 174
- 194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 0
- 195 Hardware_ECC_Recovered 0x003a 100 100 001 Old_age Always - 1666
- 196 Reallocated_Event_Count 0x0032 100 100 001 Old_age Always - 0
- 197 Current_Pending_Sector 0x0032 100 100 001 Old_age Always - 0
- 198 Offline_Uncorrectable 0x0030 100 100 001 Old_age Offline - 0
- 199 UDMA_CRC_Error_Count 0x0032 100 100 001 Old_age Always - 0
- 202 Perc_Rated_Life_Used 0x0018 099 099 001 Old_age Offline - 1
- 206 Write_Error_Rate 0x000e 100 100 001 Old_age Always - 0
- SMART Error Log Version: 1
- ATA Error Count: 0
- CR = Command Register [HEX]
- FR = Features Register [HEX]
- SC = Sector Count Register [HEX]
- SN = Sector Number Register [HEX]
- CL = Cylinder Low Register [HEX]
- CH = Cylinder High Register [HEX]
- DH = Device/Head Register [HEX]
- DC = Device Command Register [HEX]
- ER = Error register [HEX]
- ST = Status register [HEX]
- Powered_Up_Time is measured from power on, and printed as
- DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
- SS=sec, and sss=millisec. It "wraps" after 49.710 days.
- Error 0 occurred at disk power-on lifetime: 7323 hours (305 days + 3 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 00 50 10 10 d7 58 40 at LBA = 0x0058d710 = 5822224
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 61 00 10 10 d7 58 40 00 6d+20:50:16.224 WRITE FPDMA QUEUED
- 61 00 10 08 80 21 40 00 6d+20:50:16.224 WRITE FPDMA QUEUED
- 61 00 08 00 80 21 40 00 6d+20:50:16.224 WRITE FPDMA QUEUED
- 61 00 08 30 cf 3b 40 00 6d+20:50:16.224 WRITE FPDMA QUEUED
- 61 00 18 a0 30 3b 40 00 6d+20:50:16.224 WRITE FPDMA QUEUED
- Error -1 occurred at disk power-on lifetime: 7317 hours (304 days + 21 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 00 50 08 10 47 1c 40 at LBA = 0x001c4710 = 1853200
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 60 03 08 10 47 1c 40 00 6d+15:30:16.224 READ FPDMA QUEUED
- 60 00 08 70 0d b3 40 00 6d+15:30:16.224 READ FPDMA QUEUED
- 60 10 08 00 0d b3 40 00 6d+15:30:16.224 READ FPDMA QUEUED
- 60 00 10 d8 09 b4 40 00 6d+15:30:16.224 READ FPDMA QUEUED
- 60 00 00 00 a0 4d 40 00 6d+15:30:16.224 READ FPDMA QUEUED
- Error -2 occurred at disk power-on lifetime: 7317 hours (304 days + 21 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 00 50 00 10 47 1c 40 at LBA = 0x001c4710 = 1853200
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 60 00 00 68 f2 4d 40 00 6d+15:30:16.224 READ FPDMA QUEUED
- 60 03 08 10 47 1c 40 00 6d+15:30:16.224 READ FPDMA QUEUED
- 60 00 e0 20 d0 0d 40 00 6d+15:30:16.224 READ FPDMA QUEUED
- 60 10 10 48 0c b3 40 00 6d+15:30:16.224 READ FPDMA QUEUED
- 60 00 38 08 0c b3 40 00 6d+15:30:16.224 READ FPDMA QUEUED
- Error -3 occurred at disk power-on lifetime: 7317 hours (304 days + 21 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 00 50 08 10 47 1c 40 at LBA = 0x001c4710 = 1853200
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 60 00 08 10 47 1c 40 00 6d+15:30:16.224 READ FPDMA QUEUED
- 60 00 f8 b0 c1 04 40 00 6d+15:30:16.224 READ FPDMA QUEUED
- 60 00 20 98 59 16 40 00 6d+15:30:16.224 READ FPDMA QUEUED
- 60 10 00 00 54 04 40 00 6d+15:30:16.224 READ FPDMA QUEUED
- 60 00 90 88 d3 0d 40 00 6d+15:30:16.224 READ FPDMA QUEUED
- Error -4 occurred at disk power-on lifetime: 7317 hours (304 days + 21 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 00 50 80 18 47 1c 40 at LBA = 0x001c4718 = 1853208
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 60 00 80 38 09 b4 40 00 6d+15:30:16.224 READ FPDMA QUEUED
- 60 00 70 c0 08 b4 40 00 6d+15:30:16.224 READ FPDMA QUEUED
- 60 10 18 b8 69 e6 40 00 6d+15:30:16.224 READ FPDMA QUEUED
- 60 00 08 98 69 e6 40 00 6d+15:30:16.224 READ FPDMA QUEUED
- 60 00 58 30 69 e6 40 00 6d+15:30:16.224 READ FPDMA QUEUED
- SMART Self-test log structure revision number 1
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Extended offline Completed: read failure 90% 7356 19356464
- # 2 Extended offline Completed: read failure 90% 7349 19356464
- # 3 Extended offline Completed: read failure 90% 7342 19356464
- # 4 Extended offline Completed: read failure 90% 7335 19356464
- # 5 Extended offline Completed: read failure 90% 7309 19356464
- # 6 Extended offline Completed: read failure 90% 7292 19356464
- # 7 Extended offline Completed: read failure 90% 7286 19356464
- # 8 Extended offline Completed: read failure 90% 7286 19356464
- # 9 Extended offline Completed: read failure 90% 7286 19356464
- #10 Extended offline Completed: read failure 90% 7276 19356464
- #11 Extended offline Completed: read failure 90% 7271 19356464
- #12 Extended offline Completed: read failure 90% 7264 19356464
- #13 Extended offline Completed without error 00% 7242 -
- #14 Extended offline Completed without error 00% 7166 -
- #15 Extended offline Completed without error 00% 7162 -
- #16 Extended offline Completed without error 00% 7157 -
- #17 Extended offline Completed without error 00% 7154 -
- #18 Extended offline Completed without error 00% 7151 -
- #19 Extended offline Completed without error 00% 6984 -
- #20 Extended offline Completed without error 00% 6820 -
- #21 Extended offline Completed without error 00% 6807 -
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
Quellcode
Hier kannst du den Code kopieren und ihn in deinen bevorzugten Editor einfügen. PASTEBIN_DOWNLOAD_SNIPPET_EXPLAIN