debianforum.de

smartctl Taomon

SNIPPET_TEXT:

1. root@Taomon:/home/alex# smartctl -a /dev/sdb
2. smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.19.0-0.bpo.4-amd64] (local build)
3. Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
4.  
5. === START OF INFORMATION SECTION ===
6. Model Family:     Western Digital Blue
7. Device Model:     WDC WD20EZRZ-00Z5HB0
8. Serial Number:    WD-WCC4N4ALL8L3
9. LU WWN Device Id: 5 0014ee 262d02d03
10. Firmware Version: 80.00A80
11. User Capacity:    2.000.398.934.016 bytes [2,00 TB]
12. Sector Sizes:     512 bytes logical, 4096 bytes physical
13. Rotation Rate:    5400 rpm
14. Device is:        In smartctl database [for details use: -P show]
15. ATA Version is:   ACS-2 (minor revision not indicated)
16. SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
17. Local Time is:    Sat May 25 22:04:34 2019 CEST
18. SMART support is: Available - device has SMART capability.
19. SMART support is: Enabled
20.  
21. === START OF READ SMART DATA SECTION ===
22. SMART overall-health self-assessment test result: PASSED
23.  
24. General SMART Values:
25. Offline data collection status:  (0x82) Offline data collection activity
26.                                         was completed without error.
27.                                         Auto Offline Data Collection: Enabled.
28. Self-test execution status:      ( 241) Self-test routine in progress...
29.                                         10% of test remaining.
30. Total time to complete Offline
31. data collection:                (31860) seconds.
32. Offline data collection
33. capabilities:                    (0x7b) SMART execute Offline immediate.
34.                                         Auto Offline data collection on/off support.
35.                                         Suspend Offline collection upon new
36.                                         command.
37.                                         Offline surface scan supported.
38.                                         Self-test supported.
39.                                         Conveyance Self-test supported.
40.                                         Selective Self-test supported.
41. SMART capabilities:            (0x0003) Saves SMART data before entering
42.                                         power-saving mode.
43.                                         Supports SMART auto save timer.
44. Error logging capability:        (0x01) Error logging supported.
45.                                         General Purpose Logging supported.
46. Short self-test routine
47. recommended polling time:        (   2) minutes.
48. Extended self-test routine
49. recommended polling time:        ( 321) minutes.
50. Conveyance self-test routine
51. recommended polling time:        (   5) minutes.
52. SCT capabilities:              (0x7035) SCT Status supported.
53.                                         SCT Feature Control supported.
54.                                         SCT Data Table supported.
55.  
56. SMART Attributes Data Structure revision number: 16
57. Vendor Specific SMART Attributes with Thresholds:
58. ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
59.   1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       -       0
60.   3 Spin_Up_Time            0x0027   183   180   021    Pre-fail  Always       -       5808
61.   4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       87
62.   5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
63.   7 Seek_Error_Rate         0x002e   200   200   000    Old_age   Always       -       0
64.   9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       301
65.  10 Spin_Retry_Count        0x0032   100   253   000    Old_age   Always       -       0
66.  11 Calibration_Retry_Count 0x0032   100   253   000    Old_age   Always       -       0
67.  12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       66
68. 192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       43
69. 193 Load_Cycle_Count        0x0032   200   200   000    Old_age   Always       -       2137
70. 194 Temperature_Celsius     0x0022   114   113   000    Old_age   Always       -       36
71. 196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
72. 197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       0
73. 198 Offline_Uncorrectable   0x0030   200   200   000    Old_age   Offline      -       0
74. 199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       2
75. 200 Multi_Zone_Error_Rate   0x0008   200   200   000    Old_age   Offline      -       0
76.  
77. SMART Error Log Version: 1
78. No Errors Logged
79.  
80. SMART Self-test log structure revision number 1
81. Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
82. # 1  Short offline       Completed without error       00%       216         -
83. # 2  Extended offline    Aborted by host               90%       197         -
84.  
85. SMART Selective self-test log data structure revision number 1
86.  SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
87.     1        0        0  Not_testing
88.     2        0        0  Not_testing
89.     3        0        0  Not_testing
90.     4        0        0  Not_testing
91.     5        0        0  Not_testing
92. Selective self-test flags (0x0):
93.   After scanning selected spans, do NOT read-scan remainder of disk.
94. If Selective self-test is pending on power-up, resume after 0 minute delay.
95.  
96. root@Taomon:/home/alex#

Quellcode

Hier kannst du den Code kopieren und ihn in deinen bevorzugten Editor einfügen. PASTEBIN_DOWNLOAD_SNIPPET_EXPLAIN