lsusb
von paul1234- SNIPPET_DESC:
- lsusb
- SNIPPET_CREATION_TIME:
- 08.09.2019 16:13:58
- SNIPPET_PRUNE_TIME:
- Unendlich
- SNIPPET_TEXT:
-
- $ lsusb
- Bus 002 Device 004: ID 0bdb:1911 Ericsson Business Mobile Networks BV
- Bus 002 Device 003: ID 046d:c05a Logitech, Inc. M90/M100 Optical Mouse
- Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
- Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
- Bus 001 Device 006: ID 04f2:b217 Chicony Electronics Co., Ltd Lenovo Integrated Camera (0.3MP)
- Bus 001 Device 005: ID 0a5c:217f Broadcom Corp. BCM2045B (BDC-2.1)
- Bus 001 Device 004: ID 147e:2016 Upek Biometric Touchchip/Touchstrip Fingerprint Sensor
- Bus 001 Device 008: ID ffff:5678
- Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
- Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
- # /etc/fstab: static file system information.
- #
- # Use 'blkid' to print the universally unique identifier for a
- # device; this may be used with UUID= as a more robust way to name devices
- # that works even if disks are added and removed. See fstab(5).
- #
- # <file system> <mount point> <type> <options> <dump> <pass>
- # / was on /dev/sda1 during installation
- UUID=cec7ac9d-c305-4cb6-879c-3dd61427f9d3 / ext4 errors=remount-ro 0 1
- # swap was on /dev/sda5 during installation
- UUID=0a983cea-548a-43a6-8ce6-97aa1cc778f4 none swap sw 0 0
- #/dev/sr0 /media/cdrom0 udf,iso9660 user,auto 0 0
- # tail -f /var/log/syslog
- Sep 8 12:31:52 eckiTP520 mtp-probe: bus: 1, device: 24 was not an MTP device
- Sep 8 12:31:53 eckiTP520 kernel: [27926.224219] scsi 16:0:0:0: Direct-Access VendorCo ProductCode 2.00 PQ: 0 ANSI: 4
- Sep 8 12:31:53 eckiTP520 kernel: [27926.225170] sd 16:0:0:0: Attached scsi generic sg2 type 0
- Sep 8 12:31:53 eckiTP520 kernel: [27926.225759] sd 16:0:0:0: [sdb] 7864320 512-byte logical blocks: (4.02 GB/3.75 GiB)
- Sep 8 12:31:53 eckiTP520 kernel: [27926.226483] sd 16:0:0:0: [sdb] Write Protect is off
- Sep 8 12:31:53 eckiTP520 kernel: [27926.226487] sd 16:0:0:0: [sdb] Mode Sense: 03 00 00 00
- Sep 8 12:31:53 eckiTP520 kernel: [27926.227254] sd 16:0:0:0: [sdb] No Caching mode page found
- Sep 8 12:31:53 eckiTP520 kernel: [27926.227260] sd 16:0:0:0: [sdb] Assuming drive cache: write through
- Sep 8 12:31:53 eckiTP520 kernel: [27926.231142] sdb: sdb1
- Sep 8 12:31:53 eckiTP520 kernel: [27926.235634] sd 16:0:0:0: [sdb] Attached SCSI removable disk
- # parted -l
- Model: ATA KINGSTON SV200S3 (scsi)
- Disk /dev/sda: 256GB
- Sector size (logical/physical): 512B/512B
- Partition Table: msdos
- Disk Flags:
- 1 1049kB 248GB 248GB primary ext4 boot
- 2 248GB 256GB 8344MB extended
- 5 248GB 256GB 8344MB logical linux-swap(v1)
- Model: VendorCo ProductCode (scsi)
- Disk /dev/sdb: 4027MB
- Sector size (logical/physical): 512B/512B
- Partition Table: msdos
- Disk Flags:
- 1 32,8kB 4027MB 4026MB primary fat32 boot
- Model: SD SU32G (sd/mmc)
- Disk /dev/mmcblk0: 31,9GB
- Sector size (logical/physical): 512B/512B
- Partition Table: msdos
- Disk Flags:
- 1 4194kB 31,9GB 31,9GB primary fat32 lba
Quellcode
Hier kannst du den Code kopieren und ihn in deinen bevorzugten Editor einfügen. PASTEBIN_DOWNLOAD_SNIPPET_EXPLAIN