NoPaste

smartctl -a /dev/sdb

von Blackbox

SNIPPET_TEXT:
  1. smartctl 6.6 2017-11-05 r4594 [x86_64-linux-5.2.0-1-amd64] (local build)
  2. Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org
  3.  
  4. === START OF INFORMATION SECTION ===
  5. Model Family:     Hitachi Deskstar 7K1000.C
  6. Device Model:     Hitachi HDS721010CLA330
  7. Serial Number:    JP2940N115NVAV
  8. LU WWN Device Id: 5 000cca 39cd0aba0
  9. Firmware Version: JP4OA3MA
  10. User Capacity:    1.000.204.886.016 bytes [1,00 TB]
  11. Sector Size:      512 bytes logical/physical
  12. Rotation Rate:    7200 rpm
  13. Form Factor:      3.5 inches
  14. Device is:        In smartctl database [for details use: -P show]
  15. ATA Version is:   ATA8-ACS T13/1699-D revision 4
  16. SATA Version is:  SATA 2.6, 3.0 Gb/s
  17. Local Time is:    Thu Oct 10 09:37:29 2019 CEST
  18. SMART support is: Available - device has SMART capability.
  19. SMART support is: Enabled
  20.  
  21. === START OF READ SMART DATA SECTION ===
  22. SMART overall-health self-assessment test result: PASSED
  23.  
  24. General SMART Values:
  25. Offline data collection status:  (0x84) Offline data collection activity
  26.                                         was suspended by an interrupting command from host.
  27.                                         Auto Offline Data Collection: Enabled.
  28. Self-test execution status:      (   0) The previous self-test routine completed
  29.                                         without error or no self-test has ever
  30.                                         been run.
  31. Total time to complete Offline
  32. data collection:                ( 9396) seconds.
  33. Offline data collection
  34. capabilities:                    (0x5b) SMART execute Offline immediate.
  35.                                         Auto Offline data collection on/off support.
  36.                                         Suspend Offline collection upon new
  37.                                         command.
  38.                                         Offline surface scan supported.
  39.                                         Self-test supported.
  40.                                         No Conveyance Self-test supported.
  41.                                         Selective Self-test supported.
  42. SMART capabilities:            (0x0003) Saves SMART data before entering
  43.                                         power-saving mode.
  44.                                         Supports SMART auto save timer.
  45. Error logging capability:        (0x01) Error logging supported.
  46.                                         General Purpose Logging supported.
  47. Short self-test routine
  48. recommended polling time:        (   1) minutes.
  49. Extended self-test routine
  50. recommended polling time:        ( 157) minutes.
  51. SCT capabilities:              (0x003d) SCT Status supported.
  52.                                         SCT Error Recovery Control supported.
  53.                                         SCT Feature Control supported.
  54.                                         SCT Data Table supported.
  55.  
  56. SMART Attributes Data Structure revision number: 16
  57. Vendor Specific SMART Attributes with Thresholds:
  58. ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  59.   1 Raw_Read_Error_Rate     0x000b   100   100   016    Pre-fail  Always       -       0
  60.   2 Throughput_Performance  0x0005   135   135   054    Pre-fail  Offline      -       97
  61.   3 Spin_Up_Time            0x0007   129   129   024    Pre-fail  Always       -       294 (Average 292)
  62.   4 Start_Stop_Count        0x0012   100   100   000    Old_age   Always       -       523
  63.   5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail  Always       -       51
  64.   7 Seek_Error_Rate         0x000b   100   100   067    Pre-fail  Always       -       0
  65.   8 Seek_Time_Performance   0x0005   144   144   020    Pre-fail  Offline      -       28
  66.   9 Power_On_Hours          0x0012   095   095   000    Old_age   Always       -       36782
  67.  10 Spin_Retry_Count        0x0013   100   100   060    Pre-fail  Always       -       0
  68.  12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       523
  69. 192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       790
  70. 193 Load_Cycle_Count        0x0012   100   100   000    Old_age   Always       -       790
  71. 194 Temperature_Celsius     0x0002   206   206   000    Old_age   Always       -       29 (Min/Max 7/47)
  72. 196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       71
  73. 197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       0
  74. 198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -       0
  75. 199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       -       0
  76.  
  77. SMART Error Log Version: 0
  78. No Errors Logged
  79.  
  80. SMART Self-test log structure revision number 1
  81. No self-tests have been logged.  [To run self-tests, use: smartctl -t]
  82.  
  83. SMART Selective self-test log data structure revision number 1
  84.  SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
  85.     1        0        0  Not_testing
  86.     2        0        0  Not_testing
  87.     3        0        0  Not_testing
  88.     4        0        0  Not_testing
  89.     5        0        0  Not_testing
  90. Selective self-test flags (0x0):
  91.   After scanning selected spans, do NOT read-scan remainder of disk.
  92. If Selective self-test is pending on power-up, resume after 0 minute delay.

Quellcode

Hier kannst du den Code kopieren und ihn in deinen bevorzugten Editor einfügen. PASTEBIN_DOWNLOAD_SNIPPET_EXPLAIN

Verlinken

URL: alles markieren
https://nopaste.debianforum.de/40883

BBCode: alles markieren
[NP]40883[/NP]

LATEST_SNIPPETS