NoPaste

ausgabe dmesg

von debstar

Dein Code:
  1. [    0.000000] microcode: microcode updated early to revision 0x27, date = 2019-02-26
  2. [    0.000000] Linux version 4.19.0-6-amd64 (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP Debian 4.19.67-2+deb10u2 (2019-11-11)
  3. [    0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.19.0-6-amd64 root=/dev/mapper/debs--vg-root ro quiet
  4. [    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
  5. [    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
  6. [    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
  7. [    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
  8. [    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
  9. [    0.000000] BIOS-provided physical RAM map:
  10. [    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
  11. [    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
  12. [    0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable
  13. [    0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
  14. [    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b99f2fff] usable
  15. [    0.000000] BIOS-e820: [mem 0x00000000b99f3000-0x00000000b99f9fff] ACPI NVS
  16. [    0.000000] BIOS-e820: [mem 0x00000000b99fa000-0x00000000ba352fff] usable
  17. [    0.000000] BIOS-e820: [mem 0x00000000ba353000-0x00000000ba5ddfff] reserved
  18. [    0.000000] BIOS-e820: [mem 0x00000000ba5de000-0x00000000ca7e9fff] usable
  19. [    0.000000] BIOS-e820: [mem 0x00000000ca7ea000-0x00000000ca881fff] reserved
  20. [    0.000000] BIOS-e820: [mem 0x00000000ca882000-0x00000000ca8bdfff] usable
  21. [    0.000000] BIOS-e820: [mem 0x00000000ca8be000-0x00000000ca982fff] ACPI NVS
  22. [    0.000000] BIOS-e820: [mem 0x00000000ca983000-0x00000000caf7efff] reserved
  23. [    0.000000] BIOS-e820: [mem 0x00000000caf7f000-0x00000000caffefff] type 20
  24. [    0.000000] BIOS-e820: [mem 0x00000000cafff000-0x00000000caffffff] usable
  25. [    0.000000] BIOS-e820: [mem 0x00000000cb800000-0x00000000cf9fffff] reserved
  26. [    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
  27. [    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
  28. [    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
  29. [    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
  30. [    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
  31. [    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
  32. [    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000042e5fffff] usable
  33. [    0.000000] NX (Execute Disable) protection: active
  34. [    0.000000] efi: EFI v2.31 by American Megatrends
  35. [    0.000000] efi:  ACPI=0xca94f000  ACPI 2.0=0xca94f000  SMBIOS=0xf04c0  MPS=0xfd460
  36. [    0.000000] secureboot: Secure boot could not be determined (mode 0)
  37. [    0.000000] SMBIOS 2.7 present.
  38. [    0.000000] DMI: Gigabyte Technology Co., Ltd. H87-HD3/H87-HD3, BIOS F10 08/18/2015
  39. [    0.000000] tsc: Fast TSC calibration using PIT
  40. [    0.000000] tsc: Detected 3192.584 MHz processor
  41. [    0.001271] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
  42. [    0.001273] e820: remove [mem 0x000a0000-0x000fffff] usable
  43. [    0.001278] last_pfn = 0x42e600 max_arch_pfn = 0x400000000
  44. [    0.001281] MTRR default type: uncachable
  45. [    0.001282] MTRR fixed ranges enabled:
  46. [    0.001283]   00000-9FFFF write-back
  47. [    0.001283]   A0000-BFFFF uncachable
  48. [    0.001284]   C0000-CFFFF write-protect
  49. [    0.001284]   D0000-DFFFF uncachable
  50. [    0.001284]   E0000-FFFFF write-protect
  51. [    0.001285] MTRR variable ranges enabled:
  52. [    0.001286]   0 base 0000000000 mask 7C00000000 write-back
  53. [    0.001286]   1 base 0400000000 mask 7FE0000000 write-back
  54. [    0.001287]   2 base 0420000000 mask 7FF0000000 write-back
  55. [    0.001287]   3 base 00E0000000 mask 7FE0000000 uncachable
  56. [    0.001288]   4 base 00D0000000 mask 7FF0000000 uncachable
  57. [    0.001288]   5 base 00CC000000 mask 7FFC000000 uncachable
  58. [    0.001289]   6 base 00CB800000 mask 7FFF800000 uncachable
  59. [    0.001289]   7 base 042F000000 mask 7FFF000000 uncachable
  60. [    0.001290]   8 base 042E800000 mask 7FFF800000 uncachable
  61. [    0.001290]   9 base 042E600000 mask 7FFFE00000 uncachable
  62. [    0.001947] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
  63. [    0.002051] e820: update [mem 0xcb800000-0xffffffff] usable ==> reserved
  64. [    0.002055] last_pfn = 0xcb000 max_arch_pfn = 0x400000000
  65. [    0.007859] found SMP MP-table at [mem 0x000fd770-0x000fd77f]
  66. [    0.007888] Using GB pages for direct mapping
  67. [    0.007889] BRK [0x180601000, 0x180601fff] PGTABLE
  68. [    0.007890] BRK [0x180602000, 0x180602fff] PGTABLE
  69. [    0.007891] BRK [0x180603000, 0x180603fff] PGTABLE
  70. [    0.007912] BRK [0x180604000, 0x180604fff] PGTABLE
  71. [    0.007914] BRK [0x180605000, 0x180605fff] PGTABLE
  72. [    0.008012] BRK [0x180606000, 0x180606fff] PGTABLE
  73. [    0.008029] BRK [0x180607000, 0x180607fff] PGTABLE
  74. [    0.008063] BRK [0x180608000, 0x180608fff] PGTABLE
  75. [    0.008084] BRK [0x180609000, 0x180609fff] PGTABLE
  76. [    0.008095] BRK [0x18060a000, 0x18060afff] PGTABLE
  77. [    0.008127] BRK [0x18060b000, 0x18060bfff] PGTABLE
  78. [    0.008162] BRK [0x18060c000, 0x18060cfff] PGTABLE
  79. [    0.008252] RAMDISK: [mem 0x32b51000-0x3559ffff]
  80. [    0.008257] ACPI: Early table checksum verification disabled
  81. [    0.008259] ACPI: RSDP 0x00000000CA94F000 000024 (v02 ALASKA)
  82. [    0.008262] ACPI: XSDT 0x00000000CA94F080 00007C (v01 ALASKA A M I    01072009 AMI  00010013)
  83. [    0.008265] ACPI: FACP 0x00000000CA95BE20 00010C (v05 ALASKA A M I    01072009 AMI  00010013)
  84. [    0.008269] ACPI: DSDT 0x00000000CA94F190 00CC8D (v02 ALASKA A M I    00000088 INTL 20091112)
  85. [    0.008271] ACPI: FACS 0x00000000CA981080 000040
  86. [    0.008273] ACPI: APIC 0x00000000CA95BF30 000072 (v03 ALASKA A M I    01072009 AMI  00010013)
  87. [    0.008275] ACPI: FPDT 0x00000000CA95BFA8 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
  88. [    0.008277] ACPI: SSDT 0x00000000CA95BFF0 000539 (v01 PmRef  Cpu0Ist  00003000 INTL 20120711)
  89. [    0.008279] ACPI: SSDT 0x00000000CA95C530 000AD8 (v01 PmRef  CpuPm    00003000 INTL 20120711)
  90. [    0.008281] ACPI: MCFG 0x00000000CA95D008 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
  91. [    0.008282] ACPI: HPET 0x00000000CA95D048 000038 (v01 ALASKA A M I    01072009 AMI. 00000005)
  92. [    0.008284] ACPI: SSDT 0x00000000CA95D080 00036D (v01 SataRe SataTabl 00001000 INTL 20120711)
  93. [    0.008286] ACPI: SSDT 0x00000000CA95D3F0 0034E1 (v01 SaSsdt SaSsdt   00003000 INTL 20091112)
  94. [    0.008288] ACPI: BGRT 0x00000000CA9608D8 000038 (v00 ALASKA A M I    01072009 AMI  00010013)
  95. [    0.008290] ACPI: DMAR 0x00000000CA960910 0000B8 (v01 INTEL  HSW      00000001 INTL 00000001)
  96. [    0.008296] ACPI: Local APIC address 0xfee00000
  97. [    0.008358] No NUMA configuration found
  98. [    0.008359] Faking a node at [mem 0x0000000000000000-0x000000042e5fffff]
  99. [    0.008362] NODE_DATA(0) allocated [mem 0x42e5fa000-0x42e5fefff]
  100. [    0.008386] Zone ranges:
  101. [    0.008387]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
  102. [    0.008388]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
  103. [    0.008389]   Normal   [mem 0x0000000100000000-0x000000042e5fffff]
  104. [    0.008389]   Device   empty
  105. [    0.008390] Movable zone start for each node
  106. [    0.008390] Early memory node ranges
  107. [    0.008391]   node   0: [mem 0x0000000000001000-0x0000000000057fff]
  108. [    0.008391]   node   0: [mem 0x0000000000059000-0x000000000009efff]
  109. [    0.008392]   node   0: [mem 0x0000000000100000-0x00000000b99f2fff]
  110. [    0.008392]   node   0: [mem 0x00000000b99fa000-0x00000000ba352fff]
  111. [    0.008393]   node   0: [mem 0x00000000ba5de000-0x00000000ca7e9fff]
  112. [    0.008393]   node   0: [mem 0x00000000ca882000-0x00000000ca8bdfff]
  113. [    0.008394]   node   0: [mem 0x00000000cafff000-0x00000000caffffff]
  114. [    0.008394]   node   0: [mem 0x0000000100000000-0x000000042e5fffff]
  115. [    0.008396] Reserved but unavailable: 98 pages
  116. [    0.008398] Initmem setup node 0 [mem 0x0000000000001000-0x000000042e5fffff]
  117. [    0.008398] On node 0 totalpages: 4164402
  118. [    0.008399]   DMA zone: 64 pages used for memmap
  119. [    0.008400]   DMA zone: 26 pages reserved
  120. [    0.008400]   DMA zone: 3997 pages, LIFO batch:0
  121. [    0.008464]   DMA32 zone: 12887 pages used for memmap
  122. [    0.008464]   DMA32 zone: 824725 pages, LIFO batch:63
  123. [    0.021682]   Normal zone: 52120 pages used for memmap
  124. [    0.021683]   Normal zone: 3335680 pages, LIFO batch:63
  125. [    0.071234] Reserving Intel graphics memory at [mem 0xcba00000-0xcf9fffff]
  126. [    0.071305] ACPI: PM-Timer IO Port: 0x1808
  127. [    0.071306] ACPI: Local APIC address 0xfee00000
  128. [    0.071310] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
  129. [    0.071319] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
  130. [    0.071320] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
  131. [    0.071321] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
  132. [    0.071322] ACPI: IRQ0 used by override.
  133. [    0.071322] ACPI: IRQ9 used by override.
  134. [    0.071324] Using ACPI (MADT) for SMP configuration information
  135. [    0.071324] ACPI: HPET id: 0x8086a701 base: 0xfed00000
  136. [    0.071335] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
  137. [    0.071354] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
  138. [    0.071356] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
  139. [    0.071357] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
  140. [    0.071357] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
  141. [    0.071358] PM: Registered nosave memory: [mem 0xb99f3000-0xb99f9fff]
  142. [    0.071360] PM: Registered nosave memory: [mem 0xba353000-0xba5ddfff]
  143. [    0.071361] PM: Registered nosave memory: [mem 0xca7ea000-0xca881fff]
  144. [    0.071362] PM: Registered nosave memory: [mem 0xca8be000-0xca982fff]
  145. [    0.071362] PM: Registered nosave memory: [mem 0xca983000-0xcaf7efff]
  146. [    0.071363] PM: Registered nosave memory: [mem 0xcaf7f000-0xcaffefff]
  147. [    0.071364] PM: Registered nosave memory: [mem 0xcb000000-0xcb7fffff]
  148. [    0.071364] PM: Registered nosave memory: [mem 0xcb800000-0xcf9fffff]
  149. [    0.071365] PM: Registered nosave memory: [mem 0xcfa00000-0xf7ffffff]
  150. [    0.071365] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
  151. [    0.071366] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
  152. [    0.071366] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
  153. [    0.071366] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
  154. [    0.071367] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
  155. [    0.071367] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
  156. [    0.071367] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
  157. [    0.071368] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
  158. [    0.071368] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
  159. [    0.071368] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
  160. [    0.071369] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
  161. [    0.071370] [mem 0xcfa00000-0xf7ffffff] available for PCI devices
  162. [    0.071371] Booting paravirtualized kernel on bare hardware
  163. [    0.071373] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
  164. [    0.140334] random: get_random_bytes called from start_kernel+0x93/0x52c with crng_init=0
  165. [    0.140339] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
  166. [    0.140482] percpu: Embedded 45 pages/cpu s144408 r8192 d31720 u524288
  167. [    0.140487] pcpu-alloc: s144408 r8192 d31720 u524288 alloc=1*2097152
  168. [    0.140488] pcpu-alloc: [0] 0 1 2 3
  169. [    0.140505] Built 1 zonelists, mobility grouping on.  Total pages: 4099305
  170. [    0.140506] Policy zone: Normal
  171. [    0.140506] Kernel command line: BOOT_IMAGE=/vmlinuz-4.19.0-6-amd64 root=/dev/mapper/debs--vg-root ro quiet
  172. [    0.143806] Calgary: detecting Calgary via BIOS EBDA area
  173. [    0.143807] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
  174. [    0.181651] Memory: 16055024K/16657608K available (10252K kernel code, 1243K rwdata, 3324K rodata, 1584K init, 2280K bss, 602584K reserved, 0K cma-reserved)
  175. [    0.181716] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  176. [    0.181720] Kernel/User page tables isolation: enabled
  177. [    0.186761] ftrace: allocating 31872 entries in 125 pages
  178. [    0.195794] rcu: Hierarchical RCU implementation.
  179. [    0.195795] rcu:     RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
  180. [    0.195796] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
  181. [    0.197803] NR_IRQS: 33024, nr_irqs: 456, preallocated irqs: 16
  182. [    0.197975] Console: colour dummy device 80x25
  183. [    0.197979] console [tty0] enabled
  184. [    0.197989] ACPI: Core revision 20180810
  185. [    0.198131] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
  186. [    0.198137] hpet clockevent registered
  187. [    0.198140] APIC: Switch to symmetric I/O mode setup
  188. [    0.198141] DMAR: Host address width 39
  189. [    0.198142] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
  190. [    0.198145] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a
  191. [    0.198146] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
  192. [    0.198148] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da
  193. [    0.198148] DMAR: RMRR base: 0x000000caec3000 end: 0x000000caed1fff
  194. [    0.198149] DMAR: RMRR base: 0x000000cb800000 end: 0x000000cf9fffff
  195. [    0.198150] DMAR-IR: IOAPIC id 8 under DRHD base  0xfed91000 IOMMU 1
  196. [    0.198151] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
  197. [    0.198151] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
  198. [    0.198524] DMAR-IR: Enabled IRQ remapping in x2apic mode
  199. [    0.198525] x2apic enabled
  200. [    0.198529] Switched APIC routing to cluster x2apic.
  201. [    0.198907] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
  202. [    0.218142] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2e04ec340dc, max_idle_ns: 440795285335 ns
  203. [    0.218151] Calibrating delay loop (skipped), value calculated using timer frequency.. 6385.16 BogoMIPS (lpj=12770336)
  204. [    0.218152] pid_max: default: 32768 minimum: 301
  205. [    0.218370] Security Framework initialized
  206. [    0.218370] Yama: disabled by default; enable with sysctl kernel.yama.*
  207. [    0.218382] AppArmor: AppArmor initialized
  208. [    0.220284] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
  209. [    0.221269] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
  210. [    0.221310] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
  211. [    0.221341] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
  212. [    0.221496] CPU0: Thermal monitoring enabled (TM1)
  213. [    0.221506] process: using mwait in idle threads
  214. [    0.221508] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
  215. [    0.221509] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
  216. [    0.221510] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
  217. [    0.221511] Spectre V2 : Mitigation: Full generic retpoline
  218. [    0.221511] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
  219. [    0.221511] Spectre V2 : Enabling Restricted Speculation for firmware calls
  220. [    0.221517] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
  221. [    0.221517] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
  222. [    0.221534] MDS: Mitigation: Clear CPU buffers
  223. [    0.223988] Freeing SMP alternatives memory: 24K
  224. [    0.229390] TSC deadline timer enabled
  225. [    0.229391] smpboot: CPU0: Intel(R) Core(TM) i5-4570 CPU @ 3.20GHz (family: 0x6, model: 0x3c, stepping: 0x3)
  226. [    0.229448] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
  227. [    0.229482] ... version:                3
  228. [    0.229483] ... bit width:              48
  229. [    0.229483] ... generic registers:      8
  230. [    0.229483] ... value mask:             0000ffffffffffff
  231. [    0.229484] ... max period:             00007fffffffffff
  232. [    0.229484] ... fixed-purpose events:   3
  233. [    0.229484] ... event mask:             00000007000000ff
  234. [    0.229508] rcu: Hierarchical SRCU implementation.
  235. [    0.229776] random: crng done (trusting CPU's manufacturer)
  236. [    0.229973] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
  237. [    0.230000] smp: Bringing up secondary CPUs ...
  238. [    0.230044] x86: Booting SMP configuration:
  239. [    0.230044] .... node  #0, CPUs:      #1 #2 #3
  240. [    0.231403] smp: Brought up 1 node, 4 CPUs
  241. [    0.231403] smpboot: Max logical packages: 1
  242. [    0.231403] smpboot: Total of 4 processors activated (25540.67 BogoMIPS)
  243. [    0.234147] devtmpfs: initialized
  244. [    0.234184] x86/mm: Memory block size: 128MB
  245. [    0.234927] PM: Registering ACPI NVS region [mem 0xb99f3000-0xb99f9fff] (28672 bytes)
  246. [    0.234927] PM: Registering ACPI NVS region [mem 0xca8be000-0xca982fff] (806912 bytes)
  247. [    0.234927] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  248. [    0.234927] futex hash table entries: 1024 (order: 4, 65536 bytes)
  249. [    0.234927] pinctrl core: initialized pinctrl subsystem
  250. [    0.234927] NET: Registered protocol family 16
  251. [    0.234927] audit: initializing netlink subsys (disabled)
  252. [    0.234927] audit: type=2000 audit(1580900036.036:1): state=initialized audit_enabled=0 res=1
  253. [    0.234927] cpuidle: using governor ladder
  254. [    0.234927] cpuidle: using governor menu
  255. [    0.234927] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
  256. [    0.234927] ACPI: bus type PCI registered
  257. [    0.234927] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
  258. [    0.234927] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
  259. [    0.234927] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
  260. [    0.234927] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override.
  261. [    0.234927] PCI: Using configuration type 1 for base access
  262. [    0.234927] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
  263. [    0.234927] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
  264. [    0.234927] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
  265. [    0.234927] ACPI: Added _OSI(Module Device)
  266. [    0.234927] ACPI: Added _OSI(Processor Device)
  267. [    0.234927] ACPI: Added _OSI(3.0 _SCP Extensions)
  268. [    0.234927] ACPI: Added _OSI(Processor Aggregator Device)
  269. [    0.234927] ACPI: Added _OSI(Linux-Dell-Video)
  270. [    0.234927] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
  271. [    0.241874] ACPI: 5 ACPI AML tables successfully acquired and loaded
  272. [    0.243783] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
  273. [    0.244330] ACPI: Dynamic OEM Table Load:
  274. [    0.244333] ACPI: SSDT 0xFFFF9BD85B997800 0003D3 (v01 PmRef  Cpu0Cst  00003001 INTL 20120711)
  275. [    0.244597] ACPI: Dynamic OEM Table Load:
  276. [    0.244600] ACPI: SSDT 0xFFFF9BD85B8B0800 0005AA (v01 PmRef  ApIst    00003000 INTL 20120711)
  277. [    0.244877] ACPI: Dynamic OEM Table Load:
  278. [    0.244879] ACPI: SSDT 0xFFFF9BD85B94CA00 000119 (v01 PmRef  ApCst    00003000 INTL 20120711)
  279. [    0.245668] ACPI: Interpreter enabled
  280. [    0.245687] ACPI: (supports S0 S3 S4 S5)
  281. [    0.245688] ACPI: Using IOAPIC for interrupt routing
  282. [    0.245704] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
  283. [    0.245956] ACPI: Enabled 7 GPEs in block 00 to 3F
  284. [    0.251501] ACPI: Power Resource [FN00] (off)
  285. [    0.251544] ACPI: Power Resource [FN01] (off)
  286. [    0.251586] ACPI: Power Resource [FN02] (off)
  287. [    0.251628] ACPI: Power Resource [FN03] (off)
  288. [    0.251668] ACPI: Power Resource [FN04] (off)
  289. [    0.252126] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
  290. [    0.252128] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
  291. [    0.252271] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME]
  292. [    0.252350] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability LTR]
  293. [    0.252351] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
  294. [    0.252596] PCI host bridge to bus 0000:00
  295. [    0.252598] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
  296. [    0.252598] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
  297. [    0.252599] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
  298. [    0.252600] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
  299. [    0.252600] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
  300. [    0.252601] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
  301. [    0.252602] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
  302. [    0.252602] pci_bus 0000:00: root bus resource [mem 0xcfa00000-0xfeafffff window]
  303. [    0.252603] pci_bus 0000:00: root bus resource [bus 00-3e]
  304. [    0.252608] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
  305. [    0.252668] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
  306. [    0.252696] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
  307. [    0.252767] pci 0000:00:02.0: [8086:0412] type 00 class 0x030000
  308. [    0.252776] pci 0000:00:02.0: reg 0x10: [mem 0xf7400000-0xf77fffff 64bit]
  309. [    0.252781] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
  310. [    0.252784] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
  311. [    0.252839] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
  312. [    0.252845] pci 0000:00:03.0: reg 0x10: [mem 0xf7a14000-0xf7a17fff 64bit]
  313. [    0.252912] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
  314. [    0.252928] pci 0000:00:14.0: reg 0x10: [mem 0xf7a00000-0xf7a0ffff 64bit]
  315. [    0.252977] pci 0000:00:14.0: PME# supported from D3hot D3cold
  316. [    0.253024] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
  317. [    0.253041] pci 0000:00:16.0: reg 0x10: [mem 0xf7a1f000-0xf7a1f00f 64bit]
  318. [    0.253093] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
  319. [    0.253138] pci 0000:00:16.3: [8086:8c3d] type 00 class 0x070002
  320. [    0.253151] pci 0000:00:16.3: reg 0x10: [io  0xf0c0-0xf0c7]
  321. [    0.253155] pci 0000:00:16.3: reg 0x14: [mem 0xf7a1d000-0xf7a1dfff]
  322. [    0.253387] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
  323. [    0.253405] pci 0000:00:1a.0: reg 0x10: [mem 0xf7a1c000-0xf7a1c3ff]
  324. [    0.253474] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
  325. [    0.253528] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
  326. [    0.253543] pci 0000:00:1b.0: reg 0x10: [mem 0xf7a10000-0xf7a13fff 64bit]
  327. [    0.253592] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
  328. [    0.253639] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
  329. [    0.253698] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
  330. [    0.253773] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400
  331. [    0.253833] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
  332. [    0.253905] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400
  333. [    0.253966] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
  334. [    0.254038] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400
  335. [    0.254098] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
  336. [    0.254174] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
  337. [    0.254325] pci 0000:00:1d.0: reg 0x10: [mem 0xf7a1b000-0xf7a1b3ff]
  338. [    0.254396] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
  339. [    0.254449] pci 0000:00:1f.0: [8086:8c4a] type 00 class 0x060100
  340. [    0.254584] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601
  341. [    0.254596] pci 0000:00:1f.2: reg 0x10: [io  0xf0b0-0xf0b7]
  342. [    0.254602] pci 0000:00:1f.2: reg 0x14: [io  0xf0a0-0xf0a3]
  343. [    0.254607] pci 0000:00:1f.2: reg 0x18: [io  0xf090-0xf097]
  344. [    0.254612] pci 0000:00:1f.2: reg 0x1c: [io  0xf080-0xf083]
  345. [    0.254618] pci 0000:00:1f.2: reg 0x20: [io  0xf060-0xf07f]
  346. [    0.254623] pci 0000:00:1f.2: reg 0x24: [mem 0xf7a1a000-0xf7a1a7ff]
  347. [    0.254651] pci 0000:00:1f.2: PME# supported from D3hot
  348. [    0.254693] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
  349. [    0.254707] pci 0000:00:1f.3: reg 0x10: [mem 0xf7a19000-0xf7a190ff 64bit]
  350. [    0.254723] pci 0000:00:1f.3: reg 0x20: [io  0xf040-0xf05f]
  351. [    0.254802] pci 0000:01:00.0: [10de:1189] type 00 class 0x030000
  352. [    0.254817] pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
  353. [    0.254825] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xe7ffffff 64bit pref]
  354. [    0.254834] pci 0000:01:00.0: reg 0x1c: [mem 0xe8000000-0xe9ffffff 64bit pref]
  355. [    0.254839] pci 0000:01:00.0: reg 0x24: [io  0xe000-0xe07f]
  356. [    0.254845] pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
  357. [    0.254855] pci 0000:01:00.0: BAR 3: assigned to efifb
  358. [    0.254900] pci 0000:01:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x16 link at 0000:00:01.0 (capable of 126.016 Gb/s with 8 GT/s x16 link)
  359. [    0.254931] pci 0000:01:00.1: [10de:0e0a] type 00 class 0x040300
  360. [    0.254943] pci 0000:01:00.1: reg 0x10: [mem 0xf7080000-0xf7083fff]
  361. [    0.255047] pci 0000:00:01.0: PCI bridge to [bus 01]
  362. [    0.255048] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
  363. [    0.255049] pci 0000:00:01.0:   bridge window [mem 0xf6000000-0xf70fffff]
  364. [    0.255051] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xe9ffffff 64bit pref]
  365. [    0.255092] acpiphp: Slot [1] registered
  366. [    0.255095] pci 0000:00:1c.0: PCI bridge to [bus 02]
  367. [    0.255150] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
  368. [    0.255309] pci 0000:03:00.0: reg 0x10: [io  0xd000-0xd0ff]
  369. [    0.255335] pci 0000:03:00.0: reg 0x18: [mem 0xf7900000-0xf7900fff 64bit]
  370. [    0.255350] pci 0000:03:00.0: reg 0x20: [mem 0xea100000-0xea103fff 64bit pref]
  371. [    0.255438] pci 0000:03:00.0: supports D1 D2
  372. [    0.255439] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
  373. [    0.255533] pci 0000:00:1c.2: PCI bridge to [bus 03]
  374. [    0.255535] pci 0000:00:1c.2:   bridge window [io  0xd000-0xdfff]
  375. [    0.255537] pci 0000:00:1c.2:   bridge window [mem 0xf7900000-0xf79fffff]
  376. [    0.255540] pci 0000:00:1c.2:   bridge window [mem 0xea100000-0xea1fffff 64bit pref]
  377. [    0.255589] pci 0000:04:00.0: [8086:244e] type 01 class 0x060401
  378. [    0.255711] pci 0000:04:00.0: supports D1 D2
  379. [    0.255711] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
  380. [    0.255753] pci 0000:00:1c.3: PCI bridge to [bus 04-05]
  381. [    0.255796] pci_bus 0000:05: extended config space not accessible
  382. [    0.255871] pci 0000:04:00.0: PCI bridge to [bus 05] (subtractive decode)
  383. [    0.255948] pci 0000:06:00.0: [168c:0037] type 00 class 0x028000
  384. [    0.255976] pci 0000:06:00.0: reg 0x10: [mem 0xf7800000-0xf787ffff 64bit]
  385. [    0.256010] pci 0000:06:00.0: reg 0x30: [mem 0xf7880000-0xf788ffff pref]
  386. [    0.256077] pci 0000:06:00.0: supports D1 D2
  387. [    0.256078] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
  388. [    0.256159] pci 0000:00:1c.4: PCI bridge to [bus 06]
  389. [    0.256163] pci 0000:00:1c.4:   bridge window [mem 0xf7800000-0xf78fffff]
  390. [    0.256837] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
  391. [    0.256868] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
  392. [    0.256896] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
  393. [    0.256924] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 14 15)
  394. [    0.256952] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
  395. [    0.256979] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
  396. [    0.257007] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
  397. [    0.257035] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 10 11 12 14 15)
  398. [    0.257410] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=mem,locks=none
  399. [    0.257410] pci 0000:01:00.0: vgaarb: setting as boot VGA device
  400. [    0.257410] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
  401. [    0.257410] pci 0000:01:00.0: vgaarb: bridge control possible
  402. [    0.257410] pci 0000:00:02.0: vgaarb: no bridge control possible
  403. [    0.257410] vgaarb: loaded
  404. [    0.257410] pps_core: LinuxPPS API ver. 1 registered
  405. [    0.257410] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  406. [    0.257410] PTP clock support registered
  407. [    0.257410] EDAC MC: Ver: 3.0.0
  408. [    0.257410] Registered efivars operations
  409. [    0.262304] PCI: Using ACPI for IRQ routing
  410. [    0.267156] PCI: pci_cache_line_size set to 64 bytes
  411. [    0.267330] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
  412. [    0.267331] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
  413. [    0.267332] e820: reserve RAM buffer [mem 0xb99f3000-0xbbffffff]
  414. [    0.267332] e820: reserve RAM buffer [mem 0xba353000-0xbbffffff]
  415. [    0.267333] e820: reserve RAM buffer [mem 0xca7ea000-0xcbffffff]
  416. [    0.267334] e820: reserve RAM buffer [mem 0xca8be000-0xcbffffff]
  417. [    0.267335] e820: reserve RAM buffer [mem 0xcb000000-0xcbffffff]
  418. [    0.267335] e820: reserve RAM buffer [mem 0x42e600000-0x42fffffff]
  419. [    0.267394] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
  420. [    0.267394] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
  421. [    0.267394] clocksource: Switched to clocksource tsc-early
  422. [    0.273531] VFS: Disk quotas dquot_6.6.0
  423. [    0.273674] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  424. [    0.273750] AppArmor: AppArmor Filesystem Enabled
  425. [    0.273762] pnp: PnP ACPI init
  426. [    0.273846] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
  427. [    0.273850] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
  428. [    0.273970] system 00:01: [io  0x0680-0x069f] has been reserved
  429. [    0.273971] system 00:01: [io  0xffff] has been reserved
  430. [    0.273972] system 00:01: [io  0xffff] has been reserved
  431. [    0.273974] system 00:01: [io  0xffff] has been reserved
  432. [    0.273975] system 00:01: [io  0x1c00-0x1cfe] has been reserved
  433. [    0.273975] system 00:01: [io  0x1d00-0x1dfe] has been reserved
  434. [    0.273976] system 00:01: [io  0x1e00-0x1efe] has been reserved
  435. [    0.273977] system 00:01: [io  0x1f00-0x1ffe] has been reserved
  436. [    0.273978] system 00:01: [io  0x1800-0x18fe] has been reserved
  437. [    0.273978] system 00:01: [io  0x164e-0x164f] has been reserved
  438. [    0.273980] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
  439. [    0.273995] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
  440. [    0.274026] system 00:03: [io  0x1854-0x1857] has been reserved
  441. [    0.274028] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
  442. [    0.274108] system 00:04: [io  0x0a00-0x0a0f] has been reserved
  443. [    0.274109] system 00:04: [io  0x0a30-0x0a3f] has been reserved
  444. [    0.274110] system 00:04: [io  0x0a20-0x0a2f] has been reserved
  445. [    0.274112] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
  446. [    0.274273] pnp 00:05: [dma 0 disabled]
  447. [    0.274301] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
  448. [    0.274478] pnp 00:06: [dma 0 disabled]
  449. [    0.274678] pnp 00:06: Plug and Play ACPI device, IDs PNP0400 (active)
  450. [    0.274710] system 00:07: [io  0x04d0-0x04d1] has been reserved
  451. [    0.274712] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
  452. [    0.274975] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
  453. [    0.274976] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
  454. [    0.274977] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
  455. [    0.274978] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
  456. [    0.274978] system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved
  457. [    0.274979] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
  458. [    0.274980] system 00:08: [mem 0xfed90000-0xfed93fff] could not be reserved
  459. [    0.274981] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
  460. [    0.274982] system 00:08: [mem 0xff000000-0xffffffff] has been reserved
  461. [    0.274983] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
  462. [    0.274983] system 00:08: [mem 0xf7fdf000-0xf7fdffff] has been reserved
  463. [    0.274984] system 00:08: [mem 0xf7fe0000-0xf7feffff] has been reserved
  464. [    0.274986] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
  465. [    0.275128] pnp: PnP ACPI: found 9 devices
  466. [    0.280673] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
  467. [    0.280713] pci 0000:00:01.0: PCI bridge to [bus 01]
  468. [    0.280714] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
  469. [    0.280716] pci 0000:00:01.0:   bridge window [mem 0xf6000000-0xf70fffff]
  470. [    0.280717] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xe9ffffff 64bit pref]
  471. [    0.280720] pci 0000:00:1c.0: PCI bridge to [bus 02]
  472. [    0.280727] pci 0000:00:1c.2: PCI bridge to [bus 03]
  473. [    0.280729] pci 0000:00:1c.2:   bridge window [io  0xd000-0xdfff]
  474. [    0.280732] pci 0000:00:1c.2:   bridge window [mem 0xf7900000-0xf79fffff]
  475. [    0.280734] pci 0000:00:1c.2:   bridge window [mem 0xea100000-0xea1fffff 64bit pref]
  476. [    0.280738] pci 0000:04:00.0: PCI bridge to [bus 05]
  477. [    0.280756] pci 0000:00:1c.3: PCI bridge to [bus 04-05]
  478. [    0.280763] pci 0000:00:1c.4: PCI bridge to [bus 06]
  479. [    0.280766] pci 0000:00:1c.4:   bridge window [mem 0xf7800000-0xf78fffff]
  480. [    0.280772] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
  481. [    0.280773] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
  482. [    0.280774] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
  483. [    0.280775] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
  484. [    0.280775] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
  485. [    0.280776] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
  486. [    0.280777] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
  487. [    0.280778] pci_bus 0000:00: resource 11 [mem 0xcfa00000-0xfeafffff window]
  488. [    0.280778] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
  489. [    0.280779] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
  490. [    0.280780] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xe9ffffff 64bit pref]
  491. [    0.280781] pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]
  492. [    0.280781] pci_bus 0000:03: resource 1 [mem 0xf7900000-0xf79fffff]
  493. [    0.280782] pci_bus 0000:03: resource 2 [mem 0xea100000-0xea1fffff 64bit pref]
  494. [    0.280783] pci_bus 0000:06: resource 1 [mem 0xf7800000-0xf78fffff]
  495. [    0.280849] NET: Registered protocol family 2
  496. [    0.280949] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes)
  497. [    0.280984] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  498. [    0.281110] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
  499. [    0.281219] TCP: Hash tables configured (established 131072 bind 65536)
  500. [    0.281240] UDP hash table entries: 8192 (order: 6, 262144 bytes)
  501. [    0.281274] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
  502. [    0.281326] NET: Registered protocol family 1
  503. [    0.281329] NET: Registered protocol family 44
  504. [    0.302211] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x6c1 took 20265 usecs
  505. [    0.326207] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x6c1 took 23423 usecs
  506. [    0.326223] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
  507. [    0.326231] pci 0000:01:00.1: Linked as a consumer to 0000:01:00.0
  508. [    0.326240] PCI: CLS 64 bytes, default 64
  509. [    0.326285] Unpacking initramfs...
  510. [    0.776831] Freeing initrd memory: 43324K
  511. [    0.794168] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
  512. [    0.794169] software IO TLB: mapped [mem 0xb59f3000-0xb99f3000] (64MB)
  513. [    0.794590] Initialise system trusted keyrings
  514. [    0.794597] Key type blacklist registered
  515. [    0.794624] workingset: timestamp_bits=40 max_order=22 bucket_order=0
  516. [    0.795376] zbud: loaded
  517. [    0.906241] Key type asymmetric registered
  518. [    0.906242] Asymmetric key parser 'x509' registered
  519. [    0.906249] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
  520. [    0.906266] io scheduler noop registered
  521. [    0.906267] io scheduler deadline registered
  522. [    0.906286] io scheduler cfq registered (default)
  523. [    0.906286] io scheduler mq-deadline registered
  524. [    0.906723] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
  525. [    0.906731] efifb: probing for efifb
  526. [    0.906741] efifb: framebuffer at 0xe9000000, using 3072k, total 3072k
  527. [    0.906742] efifb: mode is 1024x768x32, linelength=4096, pages=1
  528. [    0.906742] efifb: scrolling: redraw
  529. [    0.906743] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
  530. [    0.908035] Console: switching to colour frame buffer device 128x48
  531. [    0.909271] fb0: EFI VGA frame buffer device
  532. [    0.909277] intel_idle: MWAIT substates: 0x42120
  533. [    0.909277] intel_idle: v0.4.1 model 0x3C
  534. [    0.909373] intel_idle: lapic_timer_reliable_states 0xffffffff
  535. [    0.909535] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  536. [    0.929939] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
  537. [    0.930101] serial 0000:00:16.3: enabling device (0000 -> 0003)
  538. [    0.950388] 0000:00:16.3: ttyS1 at I/O 0xf0c0 (irq = 19, base_baud = 115200) is a 16550A
  539. [    0.950545] Linux agpgart interface v0.103
  540. [    0.950579] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
  541. [    0.950579] AMD IOMMUv2 functionality not available on this system
  542. [    0.950837] i8042: PNP: No PS/2 controller found.
  543. [    0.950885] mousedev: PS/2 mouse device common for all mice
  544. [    0.950903] rtc_cmos 00:02: RTC can wake from S4
  545. [    0.951029] rtc_cmos 00:02: registered as rtc0
  546. [    0.951037] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
  547. [    0.951044] intel_pstate: Intel P-state driver initializing
  548. [    0.951315] ledtrig-cpu: registered to indicate activity on CPUs
  549. [    0.952482] NET: Registered protocol family 10
  550. [    0.964712] Segment Routing with IPv6
  551. [    0.964724] mip6: Mobile IPv6
  552. [    0.964725] NET: Registered protocol family 17
  553. [    0.964847] mpls_gso: MPLS GSO support
  554. [    0.965130] mce: Using 9 MCE banks
  555. [    0.965178] microcode: sig=0x306c3, pf=0x2, revision=0x27
  556. [    0.965271] microcode: Microcode Update Driver: v2.2.
  557. [    0.965277] sched_clock: Marking stable (965088338, 180703)->(972180418, -6911377)
  558. [    0.965537] registered taskstats version 1
  559. [    0.965538] Loading compiled-in X.509 certificates
  560. [    0.990231] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
  561. [    0.990241] Loaded X.509 cert 'Debian Secure Boot Signer: 00a7468def'
  562. [    0.990655] zswap: loaded using pool lzo/zbud
  563. [    0.990812] AppArmor: AppArmor sha1 policy hashing enabled
  564. [    0.991252] rtc_cmos 00:02: setting system clock to 2020-02-05 10:53:57 UTC (1580900037)
  565. [    1.139085] Freeing unused kernel image memory: 1584K
  566. [    1.170228] Write protecting the kernel read-only data: 16384k
  567. [    1.171777] Freeing unused kernel image memory: 2028K
  568. [    1.172029] Freeing unused kernel image memory: 772K
  569. [    1.180409] x86/mm: Checked W+X mappings: passed, no W+X pages found.
  570. [    1.180410] x86/mm: Checking user space page tables
  571. [    1.185818] x86/mm: Checked W+X mappings: passed, no W+X pages found.
  572. [    1.185819] Run /init as init process
  573. [    1.270872] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
  574. [    1.270884] ACPI: Power Button [PWRB]
  575. [    1.270921] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
  576. [    1.270925] ACPI: Power Button [PWRF]
  577. [    1.276133] thermal LNXTHERM:00: registered as thermal_zone0
  578. [    1.276134] ACPI: Thermal Zone [TZ00] (28 C)
  579. [    1.276278] thermal LNXTHERM:01: registered as thermal_zone1
  580. [    1.276279] ACPI: Thermal Zone [TZ01] (30 C)
  581. [    1.282457] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
  582. [    1.287213] i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003)
  583. [    1.287297] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20180810/utaddress-213)
  584. [    1.287302] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
  585. [    1.287304] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20180810/utaddress-213)
  586. [    1.287307] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
  587. [    1.287379] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20180810/utaddress-213)
  588. [    1.287381] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20180810/utaddress-213)
  589. [    1.287383] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
  590. [    1.287392] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20180810/utaddress-213)
  591. [    1.287394] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20180810/utaddress-213)
  592. [    1.287396] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
  593. [    1.287396] lpc_ich: Resource conflict(s) found affecting gpio_ich
  594. [    1.287409] i801_smbus 0000:00:1f.3: SPD Write Disable is set
  595. [    1.287430] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
  596. [    1.287996] cryptd: max_cpu_qlen set to 1000
  597. [    1.293067] SCSI subsystem initialized
  598. [    1.295746] ACPI: bus type USB registered
  599. [    1.295759] usbcore: registered new interface driver usbfs
  600. [    1.295764] usbcore: registered new interface driver hub
  601. [    1.295893] usbcore: registered new device driver usb
  602. [    1.298673] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  603. [    1.301441] ehci-pci: EHCI PCI platform driver
  604. [    1.301560] ehci-pci 0000:00:1a.0: EHCI Host Controller
  605. [    1.301564] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
  606. [    1.301574] ehci-pci 0000:00:1a.0: debug port 2
  607. [    1.302822] libata version 3.00 loaded.
  608. [    1.303807] libphy: r8169: probed
  609. [    1.304192] r8169 0000:03:00.0 eth0: RTL8168evl/8111evl, 94:de:80:7b:84:d3, XID 2c900800, IRQ 26
  610. [    1.304193] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
  611. [    1.305469] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
  612. [    1.306192] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7a1c000
  613. [    1.306750] ahci 0000:00:1f.2: version 3.0
  614. [    1.306863] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0xd impl SATA mode
  615. [    1.306864] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
  616. [    1.308570] AVX2 version of gcm_enc/dec engaged.
  617. [    1.308570] AES CTR mode by8 optimization enabled
  618. [    1.320717] r8169 0000:03:00.0 enp3s0: renamed from eth0
  619. [    1.322169] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
  620. [    1.322231] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
  621. [    1.322232] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  622. [    1.322233] usb usb1: Product: EHCI Host Controller
  623. [    1.322233] usb usb1: Manufacturer: Linux 4.19.0-6-amd64 ehci_hcd
  624. [    1.322234] usb usb1: SerialNumber: 0000:00:1a.0
  625. [    1.322318] hub 1-0:1.0: USB hub found
  626. [    1.322322] hub 1-0:1.0: 2 ports detected
  627. [    1.322472] xhci_hcd 0000:00:14.0: xHCI Host Controller
  628. [    1.322476] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
  629. [    1.323517] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810
  630. [    1.323521] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
  631. [    1.323653] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
  632. [    1.323654] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  633. [    1.323655] usb usb2: Product: xHCI Host Controller
  634. [    1.323655] usb usb2: Manufacturer: Linux 4.19.0-6-amd64 xhci-hcd
  635. [    1.323656] usb usb2: SerialNumber: 0000:00:14.0
  636. [    1.323720] hub 2-0:1.0: USB hub found
  637. [    1.323734] hub 2-0:1.0: 14 ports detected
  638. [    1.325126] ehci-pci 0000:00:1d.0: EHCI Host Controller
  639. [    1.325129] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3
  640. [    1.325137] xhci_hcd 0000:00:14.0: xHCI Host Controller
  641. [    1.325139] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
  642. [    1.325140] ehci-pci 0000:00:1d.0: debug port 2
  643. [    1.325142] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
  644. [    1.325174] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
  645. [    1.325175] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  646. [    1.325176] usb usb4: Product: xHCI Host Controller
  647. [    1.325176] usb usb4: Manufacturer: Linux 4.19.0-6-amd64 xhci-hcd
  648. [    1.325177] usb usb4: SerialNumber: 0000:00:14.0
  649. [    1.325235] hub 4-0:1.0: USB hub found
  650. [    1.325248] hub 4-0:1.0: 6 ports detected
  651. [    1.329055] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
  652. [    1.329066] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7a1b000
  653. [    1.334549] scsi host0: ahci
  654. [    1.334662] scsi host1: ahci
  655. [    1.334717] scsi host2: ahci
  656. [    1.334772] scsi host3: ahci
  657. [    1.334829] scsi host4: ahci
  658. [    1.334910] scsi host5: ahci
  659. [    1.334944] ata1: SATA max UDMA/133 abar m2048@0xf7a1a000 port 0xf7a1a100 irq 27
  660. [    1.334944] ata2: DUMMY
  661. [    1.334946] ata3: SATA max UDMA/133 abar m2048@0xf7a1a000 port 0xf7a1a200 irq 27
  662. [    1.334947] ata4: SATA max UDMA/133 abar m2048@0xf7a1a000 port 0xf7a1a280 irq 27
  663. [    1.334947] ata5: DUMMY
  664. [    1.334947] ata6: DUMMY
  665. [    1.346153] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
  666. [    1.346257] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
  667. [    1.346258] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  668. [    1.346259] usb usb3: Product: EHCI Host Controller
  669. [    1.346260] usb usb3: Manufacturer: Linux 4.19.0-6-amd64 ehci_hcd
  670. [    1.346260] usb usb3: SerialNumber: 0000:00:1d.0
  671. [    1.346345] hub 3-0:1.0: USB hub found
  672. [    1.346349] hub 3-0:1.0: 2 ports detected
  673. [    1.355222] alg: No test for pcbc(aes) (pcbc-aes-aesni)
  674. [    1.356709] i915 0000:00:02.0: enabling device (0006 -> 0007)
  675. [    1.356915] checking generic (e9000000 300000) vs hw (d0000000 10000000)
  676. [    1.356915] [drm] Replacing VGA console driver
  677. [    1.357588] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
  678. [    1.357588] [drm] Driver supports precise vblank timestamp query.
  679. [    1.357757] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=mem
  680. [    1.360732] [drm] Initialized i915 1.6.0 20180719 for 0000:00:02.0 on minor 0
  681. [    1.361534] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
  682. [    1.361707] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input2
  683. [    1.373707] [drm] Cannot find any crtc or sizes
  684. [    1.649268] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
  685. [    1.649287] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
  686. [    1.649304] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  687. [    1.650216] ata4.00: ATA-8: ST2000VM003-1CT164, SC23, max UDMA/133
  688. [    1.650218] ata4.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA
  689. [    1.651236] ata4.00: configured for UDMA/133
  690. [    1.651294] ata1.00: supports DRM functions and may not be fully accessible
  691. [    1.652235] ata3.00: ATAPI: HL-DT-ST DVDRAM GH24NS95, RN01, max UDMA/133
  692. [    1.654110] ata3.00: configured for UDMA/133
  693. [    1.658155] ata1.00: disabling queued TRIM support
  694. [    1.658157] ata1.00: ATA-9: Samsung SSD 850 PRO 256GB, EXM02B6Q, max UDMA/133
  695. [    1.658159] ata1.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 32), AA
  696. [    1.658165] usb 2-8: new full-speed USB device number 2 using xhci_hcd
  697. [    1.658171] usb 1-1: new high-speed USB device number 2 using ehci-pci
  698. [    1.665472] ata1.00: supports DRM functions and may not be fully accessible
  699. [    1.672264] ata1.00: disabling queued TRIM support
  700. [    1.679294] ata1.00: configured for UDMA/133
  701. [    1.679477] scsi 0:0:0:0: Direct-Access     ATA      Samsung SSD 850  2B6Q PQ: 0 ANSI: 5
  702. [    1.682191] usb 3-1: new high-speed USB device number 2 using ehci-pci
  703. [    1.683563] scsi 2:0:0:0: CD-ROM            HL-DT-ST DVDRAM GH24NS95  RN01 PQ: 0 ANSI: 5
  704. [    1.712655] scsi 3:0:0:0: Direct-Access     ATA      ST2000VM003-1CT1 SC23 PQ: 0 ANSI: 5
  705. [    1.717240] [drm] Cannot find any crtc or sizes
  706. [    1.721281] [drm] Cannot find any crtc or sizes
  707. [    1.723326] sd 3:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
  708. [    1.723328] sd 3:0:0:0: [sdb] 4096-byte physical blocks
  709. [    1.723330] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
  710. [    1.723333] sd 3:0:0:0: [sdb] Write Protect is off
  711. [    1.723335] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
  712. [    1.723336] sd 0:0:0:0: [sda] Write Protect is off
  713. [    1.723337] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  714. [    1.723344] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  715. [    1.723346] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  716. [    1.724638]  sda: sda1 sda2 sda3
  717. [    1.725192] sd 0:0:0:0: [sda] supports TCG Opal
  718. [    1.725193] sd 0:0:0:0: [sda] Attached SCSI disk
  719. [    1.734652] sd 3:0:0:0: [sdb] Attached SCSI disk
  720. [    1.762414] sr 2:0:0:0: [sr0] scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray
  721. [    1.762427] cdrom: Uniform CD-ROM driver Revision: 3.20
  722. [    1.762646] sr 2:0:0:0: Attached scsi CD-ROM sr0
  723. [    1.794196] tsc: Refined TSC clocksource calibration: 3192.605 MHz
  724. [    1.794204] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e05005e26b, max_idle_ns: 440795310808 ns
  725. [    1.794232] clocksource: Switched to clocksource tsc
  726. [    1.808208] usb 2-8: New USB device found, idVendor=0cf3, idProduct=3008, bcdDevice= 0.01
  727. [    1.808211] usb 2-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  728. [    1.808214] usb 2-8: Product: Bluetooth USB Host Controller
  729. [    1.808216] usb 2-8: Manufacturer: Atheros Communications
  730. [    1.808217] usb 2-8: SerialNumber: Alaska Day 2006
  731. [    1.814492] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.04
  732. [    1.814496] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  733. [    1.814788] hub 1-1:1.0: USB hub found
  734. [    1.814876] hub 1-1:1.0: 6 ports detected
  735. [    1.838518] usb 3-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.04
  736. [    1.838521] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  737. [    1.838793] hub 3-1:1.0: USB hub found
  738. [    1.838873] hub 3-1:1.0: 8 ports detected
  739. [    1.938210] usb 2-9: new high-speed USB device number 3 using xhci_hcd
  740. [    2.087540] usb 2-9: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98
  741. [    2.087542] usb 2-9: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  742. [    2.087543] usb 2-9: Product: USB2.0 Hub
  743. [    2.088286] hub 2-9:1.0: USB hub found
  744. [    2.088585] hub 2-9:1.0: 4 ports detected
  745. [    2.162002] device-mapper: uevent: version 1.0.3
  746. [    2.162055] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
  747. [    2.222206] usb 2-10: new full-speed USB device number 4 using xhci_hcd
  748. [    2.371649] usb 2-10: New USB device found, idVendor=1e7d, idProduct=2dbe, bcdDevice= 1.01
  749. [    2.371653] usb 2-10: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  750. [    2.371655] usb 2-10: Product: ROCCAT Kone Pure
  751. [    2.371657] usb 2-10: Manufacturer: ROCCAT
  752. [    2.383558] hidraw: raw HID events driver (C) Jiri Kosina
  753. [    2.386290] usbcore: registered new interface driver usbhid
  754. [    2.386291] usbhid: USB HID core driver
  755. [    2.450200] usb 2-9.1: new full-speed USB device number 5 using xhci_hcd
  756. [    2.552808] usb 2-9.1: New USB device found, idVendor=0665, idProduct=6000, bcdDevice= 0.94
  757. [    2.552810] usb 2-9.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  758. [    2.552812] usb 2-9.1: Product: Gaming keyboard
  759. [    2.552813] usb 2-9.1: Manufacturer: A1
  760. [    2.561491] input: A1  Gaming keyboard as /devices/pci0000:00/0000:00:14.0/usb2/2-9/2-9.1/2-9.1:1.0/0003:0665:6000.0003/input/input3
  761. [    2.618406] hid-generic 0003:0665:6000.0003: input,hidraw0: USB HID v1.11 Keyboard [A1  Gaming keyboard] on usb-0000:00:14.0-9.1/input0
  762. [    2.619642] input: A1  Gaming keyboard as /devices/pci0000:00/0000:00:14.0/usb2/2-9/2-9.1/2-9.1:1.1/0003:0665:6000.0004/input/input4
  763. [    2.678380] hid-generic 0003:0665:6000.0004: input,hidraw1: USB HID v1.11 Device [A1  Gaming keyboard] on usb-0000:00:14.0-9.1/input1
  764. [    2.679177] input: A1  Gaming keyboard as /devices/pci0000:00/0000:00:14.0/usb2/2-9/2-9.1/2-9.1:1.2/0003:0665:6000.0005/input/input5
  765. [    2.738416] hid-generic 0003:0665:6000.0005: input,hidraw2: USB HID v1.11 Keyboard [A1  Gaming keyboard] on usb-0000:00:14.0-9.1/input2
  766. [    2.818193] usb 2-9.2: new full-speed USB device number 6 using xhci_hcd
  767. [    2.922658] usb 2-9.2: New USB device found, idVendor=1044, idProduct=7a03, bcdDevice= 0.00
  768. [    2.922660] usb 2-9.2: New USB device strings: Mfr=0, Product=4, SerialNumber=0
  769. [    2.922661] usb 2-9.2: Product: Osmium Interface
  770. [    2.932247] hid-generic 0003:1044:7A03.0006: item 0 1 0 8 parsing failed
  771. [    2.932311] hid-generic: probe of 0003:1044:7A03.0006 failed with error -22
  772. [    2.936531] input: Osmium Interface Mouse as /devices/pci0000:00/0000:00:14.0/usb2/2-9/2-9.2/2-9.2:1.1/0003:1044:7A03.0007/input/input6
  773. [    2.936683] input: Osmium Interface as /devices/pci0000:00/0000:00:14.0/usb2/2-9/2-9.2/2-9.2:1.1/0003:1044:7A03.0007/input/input7
  774. [    2.994295] input: Osmium Interface Consumer Control as /devices/pci0000:00/0000:00:14.0/usb2/2-9/2-9.2/2-9.2:1.1/0003:1044:7A03.0007/input/input8
  775. [    2.994532] hid-generic 0003:1044:7A03.0007: input,hiddev0,hidraw3: USB HID v1.11 Mouse [Osmium Interface] on usb-0000:00:14.0-9.2/input1
  776. [    2.996698] hid-generic 0003:1044:7A03.0008: No inputs registered, leaving
  777. [    2.996930] hid-generic 0003:1044:7A03.0008: hidraw4: USB HID v1.11 Device [Osmium Interface] on usb-0000:00:14.0-9.2/input2
  778. [   20.571581] NET: Registered protocol family 38
  779. [   20.851848] PM: Image not found (code -22)
  780. [   21.157141] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
  781. [   21.295201] systemd[1]: Inserted module 'autofs4'
  782. [   21.332922] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
  783. [   21.350220] systemd[1]: Detected architecture x86-64.
  784. [   21.351932] systemd[1]: Set hostname to <debs>.
  785. [   21.352211] systemd[1]: Failed to bump fs.file-max, ignoring: Invalid argument
  786. [   21.423711] systemd[1]: /lib/systemd/system/smbd.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/samba/smbd.pid → /run/samba/smbd.pid; please update the unit file accordingly.
  787. [   21.425711] systemd[1]: /lib/systemd/system/nmbd.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/samba/nmbd.pid → /run/samba/nmbd.pid; please update the unit file accordingly.
  788. [   21.454420] systemd[1]: Listening on fsck to fsckd communication Socket.
  789. [   21.454546] systemd[1]: Listening on Journal Audit Socket.
  790. [   21.455970] systemd[1]: Created slice system-systemd\x2dcryptsetup.slice.
  791. [   21.456049] systemd[1]: Listening on LVM2 poll daemon socket.
  792. [   21.474944] lp: driver loaded but no devices found
  793. [   21.477753] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro
  794. [   21.481183] ppdev: user-space parallel port driver
  795. [   21.483204] parport_pc 00:06: reported by Plug and Play ACPI
  796. [   21.483262] parport0: PC-style at 0x378, irq 5 [PCSPP,TRISTATE]
  797. [   21.582289] lp0: using parport0 (interrupt-driven).
  798. [   21.605018] version 39.2
  799. [   21.608169] iTCO_vendor_support: vendor-support=0
  800. [   21.609576] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
  801. [   21.609605] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
  802. [   21.609935] ipmi device interface
  803. [   21.651498] EFI Variables Facility v0.08 2004-May-17
  804. [   21.654840] sd 0:0:0:0: Attached scsi generic sg0 type 0
  805. [   21.654861] sr 2:0:0:0: Attached scsi generic sg1 type 5
  806. [   21.654999] input: PC Speaker as /devices/platform/pcspkr/input/input9
  807. [   21.655016] sd 3:0:0:0: Attached scsi generic sg2 type 0
  808. [   21.667138] snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002)
  809. [   21.667251] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
  810. [   21.667323] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
  811. [   21.667510] snd_hda_intel 0000:01:00.1: Disabling MSI
  812. [   21.667514] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
  813. [   21.671378] input: ROCCAT ROCCAT Kone Pure as /devices/pci0000:00/0000:00:14.0/usb2/2-10/2-10:1.0/0003:1E7D:2DBE.0001/input/input10
  814. [   21.678528] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
  815. [   21.678529] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
  816. [   21.678530] RAPL PMU: hw unit of domain package 2^-14 Joules
  817. [   21.678530] RAPL PMU: hw unit of domain dram 2^-14 Joules
  818. [   21.678530] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
  819. [   21.707341] nvidia: loading out-of-tree module taints kernel.
  820. [   21.707347] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
  821. [   21.707348] nvidia: module license 'NVIDIA' taints kernel.
  822. [   21.707348] Disabling lock debugging due to kernel taint
  823. [   21.712220] nvidia: module verification failed: signature and/or required key missing - tainting kernel
  824. [   21.720910] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11
  825. [   21.730237] nvidia-nvlink: Nvlink Core is being initialized, major device number 241
  826. [   21.730503] nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
  827. [   21.737145] pstore: Using compression: deflate
  828. [   21.748521] pstore: crypto_comp_decompress failed, ret = -22!
  829. [   21.748542] pstore: decompression failed: -22
  830. [   21.748572] konepure 0003:1E7D:2DBE.0001: input,hiddev1,hidraw5: USB HID v1.00 Mouse [ROCCAT ROCCAT Kone Pure] on usb-0000:00:14.0-10/input0
  831. [   21.751790] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12
  832. [   21.751818] input: ROCCAT ROCCAT Kone Pure as /devices/pci0000:00/0000:00:14.0/usb2/2-10/2-10:1.1/0003:1E7D:2DBE.0002/input/input16
  833. [   21.751826] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13
  834. [   21.751895] pstore: crypto_comp_decompress failed, ret = -22!
  835. [   21.751912] pstore: decompression failed: -22
  836. [   21.751995] pstore: crypto_comp_decompress failed, ret = -22!
  837. [   21.752011] pstore: decompression failed: -22
  838. [   21.752090] pstore: crypto_comp_decompress failed, ret = -22!
  839. [   21.752106] pstore: decompression failed: -22
  840. [   21.752180] pstore: crypto_comp_decompress failed, ret = -22!
  841. [   21.752196] pstore: decompression failed: -22
  842. [   21.752278] pstore: crypto_comp_decompress failed, ret = -22!
  843. [   21.752293] pstore: decompression failed: -22
  844. [   21.764744] pstore: crypto_comp_decompress failed, ret = -22!
  845. [   21.764764] pstore: decompression failed: -22
  846. [   21.764845] pstore: crypto_comp_decompress failed, ret = -22!
  847. [   21.764860] pstore: decompression failed: -22
  848. [   21.764930] pstore: crypto_comp_decompress failed, ret = -22!
  849. [   21.764946] pstore: decompression failed: -22
  850. [   21.765014] pstore: crypto_comp_decompress failed, ret = -22!
  851. [   21.765029] pstore: decompression failed: -22
  852. [   21.765099] pstore: crypto_comp_decompress failed, ret = -22!
  853. [   21.765114] pstore: decompression failed: -22
  854. [   21.765183] pstore: crypto_comp_decompress failed, ret = -22!
  855. [   21.765198] pstore: decompression failed: -22
  856. [   21.765267] pstore: crypto_comp_decompress failed, ret = -22!
  857. [   21.765283] pstore: decompression failed: -22
  858. [   21.765352] pstore: crypto_comp_decompress failed, ret = -22!
  859. [   21.765367] pstore: decompression failed: -22
  860. [   21.765436] pstore: crypto_comp_decompress failed, ret = -22!
  861. [   21.765451] pstore: decompression failed: -22
  862. [   21.765520] pstore: crypto_comp_decompress failed, ret = -22!
  863. [   21.765535] pstore: decompression failed: -22
  864. [   21.765605] pstore: crypto_comp_decompress failed, ret = -22!
  865. [   21.765620] pstore: decompression failed: -22
  866. [   21.765689] pstore: crypto_comp_decompress failed, ret = -22!
  867. [   21.765704] pstore: decompression failed: -22
  868. [   21.765776] pstore: crypto_comp_decompress failed, ret = -22!
  869. [   21.766280] pstore: decompression failed: -22
  870. [   21.767447] pstore: crypto_comp_decompress failed, ret = -22!
  871. [   21.767957] pstore: decompression failed: -22
  872. [   21.768518] pstore: crypto_comp_decompress failed, ret = -22!
  873. [   21.769024] pstore: decompression failed: -22
  874. [   21.769582] pstore: crypto_comp_decompress failed, ret = -22!
  875. [   21.770079] pstore: decompression failed: -22
  876. [   21.770794] pstore: crypto_comp_decompress failed, ret = -22!
  877. [   21.771271] pstore: decompression failed: -22
  878. [   21.771973] pstore: crypto_comp_decompress failed, ret = -22!
  879. [   21.772448] pstore: decompression failed: -22
  880. [   21.773017] pstore: crypto_comp_decompress failed, ret = -22!
  881. [   21.773486] pstore: decompression failed: -22
  882. [   21.774361] pstore: crypto_comp_decompress failed, ret = -22!
  883. [   21.774830] pstore: decompression failed: -22
  884. [   21.775385] pstore: crypto_comp_decompress failed, ret = -22!
  885. [   21.775859] pstore: decompression failed: -22
  886. [   21.776642] pstore: crypto_comp_decompress failed, ret = -22!
  887. [   21.777111] pstore: decompression failed: -22
  888. [   21.777724] pstore: crypto_comp_decompress failed, ret = -22!
  889. [   21.778198] pstore: decompression failed: -22
  890. [   21.778937] pstore: crypto_comp_decompress failed, ret = -22!
  891. [   21.779412] pstore: decompression failed: -22
  892. [   21.780146] pstore: crypto_comp_decompress failed, ret = -22!
  893. [   21.780617] pstore: decompression failed: -22
  894. [   21.781144] pstore: crypto_comp_decompress failed, ret = -22!
  895. [   21.781613] pstore: decompression failed: -22
  896. [   21.782198] pstore: crypto_comp_decompress failed, ret = -22!
  897. [   21.782669] pstore: decompression failed: -22
  898. [   21.783195] pstore: crypto_comp_decompress failed, ret = -22!
  899. [   21.783666] pstore: decompression failed: -22
  900. [   21.784437] pstore: crypto_comp_decompress failed, ret = -22!
  901. [   21.784909] pstore: decompression failed: -22
  902. [   21.785659] pstore: crypto_comp_decompress failed, ret = -22!
  903. [   21.786132] pstore: decompression failed: -22
  904. [   21.786909] pstore: crypto_comp_decompress failed, ret = -22!
  905. [   21.787382] pstore: decompression failed: -22
  906. [   21.788129] pstore: crypto_comp_decompress failed, ret = -22!
  907. [   21.788602] pstore: decompression failed: -22
  908. [   21.789404] pstore: crypto_comp_decompress failed, ret = -22!
  909. [   21.789878] pstore: decompression failed: -22
  910. [   21.790841] pstore: crypto_comp_decompress failed, ret = -22!
  911. [   21.791315] pstore: decompression failed: -22
  912. [   21.791845] pstore: crypto_comp_decompress failed, ret = -22!
  913. [   21.792317] pstore: decompression failed: -22
  914. [   21.792845] pstore: crypto_comp_decompress failed, ret = -22!
  915. [   21.793317] pstore: decompression failed: -22
  916. [   21.793843] pstore: crypto_comp_decompress failed, ret = -22!
  917. [   21.794320] pstore: decompression failed: -22
  918. [   21.795042] pstore: crypto_comp_decompress failed, ret = -22!
  919. [   21.795516] pstore: decompression failed: -22
  920. [   21.796042] pstore: crypto_comp_decompress failed, ret = -22!
  921. [   21.796516] pstore: decompression failed: -22
  922. [   21.797039] pstore: crypto_comp_decompress failed, ret = -22!
  923. [   21.797512] pstore: decompression failed: -22
  924. [   21.798040] pstore: crypto_comp_decompress failed, ret = -22!
  925. [   21.798516] pstore: decompression failed: -22
  926. [   21.799230] pstore: crypto_comp_decompress failed, ret = -22!
  927. [   21.799704] pstore: decompression failed: -22
  928. [   21.800229] pstore: crypto_comp_decompress failed, ret = -22!
  929. [   21.800703] pstore: decompression failed: -22
  930. [   21.801228] pstore: crypto_comp_decompress failed, ret = -22!
  931. [   21.801701] pstore: decompression failed: -22
  932. [   21.802376] pstore: crypto_comp_decompress failed, ret = -22!
  933. [   21.802850] pstore: decompression failed: -22
  934. [   21.803376] pstore: crypto_comp_decompress failed, ret = -22!
  935. [   21.803850] pstore: decompression failed: -22
  936. [   21.804375] pstore: crypto_comp_decompress failed, ret = -22!
  937. [   21.804849] pstore: decompression failed: -22
  938. [   21.805372] pstore: crypto_comp_decompress failed, ret = -22!
  939. [   21.805846] pstore: decompression failed: -22
  940. [   21.806559] pstore: crypto_comp_decompress failed, ret = -22!
  941. [   21.807033] pstore: decompression failed: -22
  942. [   21.807557] pstore: crypto_comp_decompress failed, ret = -22!
  943. [   21.808030] pstore: decompression failed: -22
  944. [   21.808555] pstore: crypto_comp_decompress failed, ret = -22!
  945. [   21.809028] pstore: decompression failed: -22
  946. [   21.809551] pstore: crypto_comp_decompress failed, ret = -22!
  947. [   21.810025] pstore: decompression failed: -22
  948. [   21.810824] pstore: crypto_comp_decompress failed, ret = -22!
  949. [   21.810867] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14
  950. [   21.811298] pstore: decompression failed: -22
  951. [   21.811326] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input15
  952. [   21.811777] konepure 0003:1E7D:2DBE.0002: input,hidraw6: USB HID v1.11 Keyboard [ROCCAT ROCCAT Kone Pure] on usb-0000:00:14.0-10/input1
  953. [   21.814163] pstore: crypto_comp_decompress failed, ret = -22!
  954. [   21.814642] pstore: decompression failed: -22
  955. [   21.815617] pstore: crypto_comp_decompress failed, ret = -22!
  956. [   21.816093] pstore: decompression failed: -22
  957. [   21.817015] pstore: crypto_comp_decompress failed, ret = -22!
  958. [   21.817491] pstore: decompression failed: -22
  959. [   21.818680] pstore: crypto_comp_decompress failed, ret = -22!
  960. [   21.819156] pstore: decompression failed: -22
  961. [   21.819901] pstore: crypto_comp_decompress failed, ret = -22!
  962. [   21.820377] pstore: decompression failed: -22
  963. [   21.821410] pstore: crypto_comp_decompress failed, ret = -22!
  964. [   21.821886] pstore: decompression failed: -22
  965. [   21.822848] pstore: crypto_comp_decompress failed, ret = -22!
  966. [   21.823324] pstore: decompression failed: -22
  967. [   21.824131] pstore: crypto_comp_decompress failed, ret = -22!
  968. [   21.824607] pstore: decompression failed: -22
  969. [   21.825362] pstore: crypto_comp_decompress failed, ret = -22!
  970. [   21.825837] pstore: decompression failed: -22
  971. [   21.826797] pstore: crypto_comp_decompress failed, ret = -22!
  972. [   21.827274] pstore: decompression failed: -22
  973. [   21.828076] pstore: crypto_comp_decompress failed, ret = -22!
  974. [   21.828553] pstore: decompression failed: -22
  975. [   21.829303] pstore: crypto_comp_decompress failed, ret = -22!
  976. [   21.829780] pstore: decompression failed: -22
  977. [   21.831063] pstore: crypto_comp_decompress failed, ret = -22!
  978. [   21.831549] pstore: decompression failed: -22
  979. [   21.831811] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  418.74  Wed May  1 11:49:41 CDT 2019
  980. [   21.837782] pstore: crypto_comp_decompress failed, ret = -22!
  981. [   21.838279] pstore: decompression failed: -22
  982. [   21.859849] pstore: crypto_comp_decompress failed, ret = -22!
  983. [   21.860330] pstore: decompression failed: -22
  984. [   21.867905] pstore: crypto_comp_decompress failed, ret = -22!
  985. [   21.868390] pstore: decompression failed: -22
  986. [   21.873297] snd_hda_codec_realtek hdaudioC1D2: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
  987. [   21.873298] snd_hda_codec_realtek hdaudioC1D2:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
  988. [   21.873299] snd_hda_codec_realtek hdaudioC1D2:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
  989. [   21.873300] snd_hda_codec_realtek hdaudioC1D2:    mono: mono_out=0x0
  990. [   21.873300] snd_hda_codec_realtek hdaudioC1D2:    dig-out=0x11/0x0
  991. [   21.873301] snd_hda_codec_realtek hdaudioC1D2:    inputs:
  992. [   21.873302] snd_hda_codec_realtek hdaudioC1D2:      Front Mic=0x19
  993. [   21.873303] snd_hda_codec_realtek hdaudioC1D2:      Rear Mic=0x18
  994. [   21.873303] snd_hda_codec_realtek hdaudioC1D2:      Line=0x1a
  995. [   21.873304] snd_hda_codec_realtek hdaudioC1D2:    dig-in=0x1f
  996. [   21.874154] pstore: crypto_comp_decompress failed, ret = -22!
  997. [   21.874154] pstore: decompression failed: -22
  998. [   21.877880] pstore: crypto_comp_decompress failed, ret = -22!
  999. [   21.878367] pstore: decompression failed: -22
  1000. [   21.879138] pstore: crypto_comp_decompress failed, ret = -22!
  1001. [   21.879614] pstore: decompression failed: -22
  1002. [   21.882155] pstore: crypto_comp_decompress failed, ret = -22!
  1003. [   21.882631] pstore: decompression failed: -22
  1004. [   21.883783] pstore: crypto_comp_decompress failed, ret = -22!
  1005. [   21.884261] pstore: decompression failed: -22
  1006. [   21.886183] pstore: crypto_comp_decompress failed, ret = -22!
  1007. [   21.886662] pstore: decompression failed: -22
  1008. [   21.889509] pstore: crypto_comp_decompress failed, ret = -22!
  1009. [   21.889992] pstore: decompression failed: -22
  1010. [   21.900471] Bluetooth: Core ver 2.22
  1011. [   21.900479] NET: Registered protocol family 31
  1012. [   21.900480] Bluetooth: HCI device and connection manager initialized
  1013. [   21.900482] Bluetooth: HCI socket layer initialized
  1014. [   21.900483] Bluetooth: L2CAP socket layer initialized
  1015. [   21.900489] Bluetooth: SCO socket layer initialized
  1016. [   21.901452] pstore: crypto_comp_decompress failed, ret = -22!
  1017. [   21.901937] pstore: decompression failed: -22
  1018. [   21.904790] pstore: crypto_comp_decompress failed, ret = -22!
  1019. [   21.905275] pstore: decompression failed: -22
  1020. [   21.906411] pstore: crypto_comp_decompress failed, ret = -22!
  1021. [   21.906890] pstore: decompression failed: -22
  1022. [   21.908365] pstore: crypto_comp_decompress failed, ret = -22!
  1023. [   21.908846] pstore: decompression failed: -22
  1024. [   21.917618] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms  418.74  Wed May  1 11:23:27 CDT 2019
  1025. [   21.918154] usbcore: registered new interface driver btusb
  1026. [   21.919038] pstore: crypto_comp_decompress failed, ret = -22!
  1027. [   21.919522] pstore: decompression failed: -22
  1028. [   21.920569] pstore: crypto_comp_decompress failed, ret = -22!
  1029. [   21.921047] pstore: decompression failed: -22
  1030. [   21.922386] pstore: crypto_comp_decompress failed, ret = -22!
  1031. [   21.922866] pstore: decompression failed: -22
  1032. [   21.924208] pstore: crypto_comp_decompress failed, ret = -22!
  1033. [   21.924686] pstore: decompression failed: -22
  1034. [   21.925487] pstore: crypto_comp_decompress failed, ret = -22!
  1035. [   21.925964] pstore: decompression failed: -22
  1036. [   21.926892] usb 2-8: firmware: failed to load ar3k/AthrBT_0x01020200.dfu (-2)
  1037. [   21.927381] firmware_class: See https://wiki.debian.org/Firmware for information about missing firmware
  1038. [   21.927883] usb 2-8: Direct firmware load for ar3k/AthrBT_0x01020200.dfu failed with error -2
  1039. [   21.927887] Bluetooth: Loading patch file failed
  1040. [   21.928389] ath3k: probe of 2-8:1.0 failed with error -2
  1041. [   21.928415] usbcore: registered new interface driver ath3k
  1042. [   21.929479] pstore: crypto_comp_decompress failed, ret = -22!
  1043. [   21.929986] pstore: decompression failed: -22
  1044. [   21.933002] pstore: crypto_comp_decompress failed, ret = -22!
  1045. [   21.933511] pstore: decompression failed: -22
  1046. [   21.940740] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/input17
  1047. [   21.940879] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input18
  1048. [   21.940904] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input19
  1049. [   21.940930] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input20
  1050. [   21.940955] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card1/input21
  1051. [   21.940979] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card1/input22
  1052. [   21.941003] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card1/input23
  1053. [   21.941027] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card1/input24
  1054. [   21.941052] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input25
  1055. [   21.941083] snd_hda_intel 0000:00:1b.0: device 1458:a002 is on the power_save blacklist, forcing power_save to 0
  1056. [   21.945200] pstore: crypto_comp_decompress failed, ret = -22!
  1057. [   21.945711] pstore: decompression failed: -22
  1058. [   21.947684] pstore: crypto_comp_decompress failed, ret = -22!
  1059. [   21.948193] pstore: decompression failed: -22
  1060. [   21.948742] pstore: crypto_comp_decompress failed, ret = -22!
  1061. [   21.949244] pstore: decompression failed: -22
  1062. [   21.949791] pstore: crypto_comp_decompress failed, ret = -22!
  1063. [   21.950307] pstore: decompression failed: -22
  1064. [   21.950863] pstore: crypto_comp_decompress failed, ret = -22!
  1065. [   21.951367] pstore: decompression failed: -22
  1066. [   21.951928] pstore: crypto_comp_decompress failed, ret = -22!
  1067. [   21.952432] pstore: decompression failed: -22
  1068. [   21.953577] pstore: crypto_comp_decompress failed, ret = -22!
  1069. [   21.954086] pstore: decompression failed: -22
  1070. [   21.964208] intel_rapl: Found RAPL domain package
  1071. [   21.964209] intel_rapl: Found RAPL domain core
  1072. [   21.964210] intel_rapl: Found RAPL domain uncore
  1073. [   21.964210] intel_rapl: Found RAPL domain dram
  1074. [   21.975420] pstore: crypto_comp_decompress failed, ret = -22!
  1075. [   21.975931] pstore: decompression failed: -22
  1076. [   21.977610] pstore: crypto_comp_decompress failed, ret = -22!
  1077. [   21.978116] pstore: decompression failed: -22
  1078. [   21.982824] pstore: crypto_comp_decompress failed, ret = -22!
  1079. [   21.983333] pstore: decompression failed: -22
  1080. [   21.984154] pstore: crypto_comp_decompress failed, ret = -22!
  1081. [   21.984661] pstore: decompression failed: -22
  1082. [   21.985779] pstore: crypto_comp_decompress failed, ret = -22!
  1083. [   21.986300] pstore: decompression failed: -22
  1084. [   21.989324] pstore: crypto_comp_decompress failed, ret = -22!
  1085. [   21.989833] pstore: decompression failed: -22
  1086. [   21.995073] pstore: crypto_comp_decompress failed, ret = -22!
  1087. [   21.995583] pstore: decompression failed: -22
  1088. [   22.006171] pstore: crypto_comp_decompress failed, ret = -22!
  1089. [   22.006707] pstore: decompression failed: -22
  1090. [   22.008288] pstore: crypto_comp_decompress failed, ret = -22!
  1091. [   22.008802] pstore: decompression failed: -22
  1092. [   22.012456] pstore: crypto_comp_decompress failed, ret = -22!
  1093. [   22.012965] pstore: decompression failed: -22
  1094. [   22.013867] pstore: crypto_comp_decompress failed, ret = -22!
  1095. [   22.014378] pstore: decompression failed: -22
  1096. [   22.017405] pstore: crypto_comp_decompress failed, ret = -22!
  1097. [   22.017916] pstore: decompression failed: -22
  1098. [   22.019005] pstore: crypto_comp_decompress failed, ret = -22!
  1099. [   22.019514] pstore: decompression failed: -22
  1100. [   22.020183] pstore: crypto_comp_decompress failed, ret = -22!
  1101. [   22.020685] pstore: decompression failed: -22
  1102. [   22.021285] pstore: crypto_comp_decompress failed, ret = -22!
  1103. [   22.021769] pstore: decompression failed: -22
  1104. [   22.022684] pstore: crypto_comp_decompress failed, ret = -22!
  1105. [   22.023165] pstore: decompression failed: -22
  1106. [   22.023720] pstore: crypto_comp_decompress failed, ret = -22!
  1107. [   22.024198] pstore: decompression failed: -22
  1108. [   22.024774] pstore: crypto_comp_decompress failed, ret = -22!
  1109. [   22.025254] pstore: decompression failed: -22
  1110. [   22.025829] pstore: crypto_comp_decompress failed, ret = -22!
  1111. [   22.026318] pstore: decompression failed: -22
  1112. [   22.026913] pstore: crypto_comp_decompress failed, ret = -22!
  1113. [   22.027391] pstore: decompression failed: -22
  1114. [   22.028055] pstore: crypto_comp_decompress failed, ret = -22!
  1115. [   22.028537] pstore: decompression failed: -22
  1116. [   22.029128] pstore: crypto_comp_decompress failed, ret = -22!
  1117. [   22.029607] pstore: decompression failed: -22
  1118. [   22.030746] pstore: crypto_comp_decompress failed, ret = -22!
  1119. [   22.031229] pstore: decompression failed: -22
  1120. [   22.032240] pstore: crypto_comp_decompress failed, ret = -22!
  1121. [   22.032723] pstore: decompression failed: -22
  1122. [   22.034142] pstore: crypto_comp_decompress failed, ret = -22!
  1123. [   22.034642] pstore: decompression failed: -22
  1124. [   22.038823] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
  1125. [   22.038825] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 1
  1126. [   22.046515] pstore: crypto_comp_decompress failed, ret = -22!
  1127. [   22.047000] pstore: decompression failed: -22
  1128. [   22.047635] pstore: crypto_comp_decompress failed, ret = -22!
  1129. [   22.048112] pstore: decompression failed: -22
  1130. [   22.049701] pstore: crypto_comp_decompress failed, ret = -22!
  1131. [   22.050190] pstore: decompression failed: -22
  1132. [   22.050851] ath9k 0000:06:00.0: enabling device (0000 -> 0002)
  1133. [   22.051611] pstore: crypto_comp_decompress failed, ret = -22!
  1134. [   22.052092] pstore: decompression failed: -22
  1135. [   22.053238] pstore: crypto_comp_decompress failed, ret = -22!
  1136. [   22.053716] pstore: decompression failed: -22
  1137. [   22.054582] pstore: crypto_comp_decompress failed, ret = -22!
  1138. [   22.055061] pstore: decompression failed: -22
  1139. [   22.055581] pstore: crypto_comp_decompress failed, ret = -22!
  1140. [   22.056056] pstore: decompression failed: -22
  1141. [   22.056595] pstore: crypto_comp_decompress failed, ret = -22!
  1142. [   22.057069] pstore: decompression failed: -22
  1143. [   22.057907] pstore: crypto_comp_decompress failed, ret = -22!
  1144. [   22.057957] ath: EEPROM regdomain: 0x60
  1145. [   22.058392] pstore: decompression failed: -22
  1146. [   22.058884] ath: EEPROM indicates we should expect a direct regpair map
  1147. [   22.058885] ath: Country alpha2 being used: 00
  1148. [   22.058886] ath: Regpair used: 0x60
  1149. [   22.061323] pstore: crypto_comp_decompress failed, ret = -22!
  1150. [   22.061805] pstore: decompression failed: -22
  1151. [   22.063151] pstore: crypto_comp_decompress failed, ret = -22!
  1152. [   22.063629] pstore: decompression failed: -22
  1153. [   22.064211] pstore: crypto_comp_decompress failed, ret = -22!
  1154. [   22.064688] pstore: decompression failed: -22
  1155. [   22.065253] pstore: crypto_comp_decompress failed, ret = -22!
  1156. [   22.065742] pstore: decompression failed: -22
  1157. [   22.066531] pstore: crypto_comp_decompress failed, ret = -22!
  1158. [   22.067010] pstore: decompression failed: -22
  1159. [   22.067569] pstore: Registered efi as persistent store backend
  1160. [   22.069636] Adding 16654332k swap on /dev/mapper/debs--vg-swap_1.  Priority:-2 extents:1 across:16654332k SSFS
  1161. [   22.077942] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
  1162. [   22.078108] ieee80211 phy0: Atheros AR9485 Rev:1 mem=0xffffc03642780000, irq=16
  1163. [   22.081572] ath9k 0000:06:00.0 wlp6s0: renamed from wlan0
  1164. [   22.204216] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
  1165. [   22.212854] systemd-journald[445]: Received request to flush runtime journal from PID 1
  1166. [   22.248221] EXT4-fs (sda2): mounting ext2 file system using the ext4 subsystem
  1167. [   22.252999] EXT4-fs (sda2): mounted filesystem without journal. Opts: (null)
  1168. [   22.328776] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null)
  1169. [   22.466579] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input26
  1170. [   22.466620] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input27
  1171. [   22.466650] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input28
  1172. [   22.466678] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input29
  1173. [   25.035840] EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts: (null)
  1174. [   25.059623] audit: type=1400 audit(1580900061.562:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=704 comm="apparmor_parser"
  1175. [   25.059626] audit: type=1400 audit(1580900061.562:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=704 comm="apparmor_parser"
  1176. [   25.059696] audit: type=1400 audit(1580900061.562:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=701 comm="apparmor_parser"
  1177. [   25.061482] audit: type=1400 audit(1580900061.562:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=707 comm="apparmor_parser"
  1178. [   25.062129] audit: type=1400 audit(1580900061.562:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="virt-aa-helper" pid=703 comm="apparmor_parser"
  1179. [   25.062288] audit: type=1400 audit(1580900061.566:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=708 comm="apparmor_parser"
  1180. [   25.065446] audit: type=1400 audit(1580900061.566:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=709 comm="apparmor_parser"
  1181. [   25.065449] audit: type=1400 audit(1580900061.566:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=709 comm="apparmor_parser"
  1182. [   25.065450] audit: type=1400 audit(1580900061.566:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd//third_party" pid=709 comm="apparmor_parser"
  1183. [   25.065813] audit: type=1400 audit(1580900061.566:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/libvirtd" pid=711 comm="apparmor_parser"
  1184. [   25.466009] resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000d0000-0x000d3fff window]
  1185. [   25.466147] caller _nv000935rm+0x1bf/0x1f0 [nvidia] mapping multiple BARs
  1186. [   26.039188] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
  1187. [   26.046968] r8169 0000:03:00.0: firmware: direct-loading firmware rtl_nic/rtl8168e-3.fw
  1188. [   26.047238] RTL8211E Gigabit Ethernet r8169-300:00: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=r8169-300:00, irq=IGNORE)
  1189. [   26.272537] r8169 0000:03:00.0 enp3s0: Link is Down
  1190. [   26.272644] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
  1191. [   26.275532] IPv6: ADDRCONF(NETDEV_UP): wlp6s0: link is not ready
  1192. [   26.289618] IPv6: ADDRCONF(NETDEV_UP): wlp6s0: link is not ready
  1193. [   26.313399] IPv6: ADDRCONF(NETDEV_UP): wlp6s0: link is not ready
  1194. [   26.392276] IPv6: ADDRCONF(NETDEV_UP): wlp6s0: link is not ready
  1195. [   27.055566] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
  1196. [   27.059826] tun: Universal TUN/TAP device driver, 1.6
  1197. [   27.060317] virbr0: port 1(virbr0-nic) entered blocking state
  1198. [   27.060318] virbr0: port 1(virbr0-nic) entered disabled state
  1199. [   27.060355] device virbr0-nic entered promiscuous mode
  1200. [   27.366744] virbr0: port 1(virbr0-nic) entered blocking state
  1201. [   27.366746] virbr0: port 1(virbr0-nic) entered listening state
  1202. [   27.429650] virbr0: port 1(virbr0-nic) entered disabled state
  1203. [   29.883022] r8169 0000:03:00.0 enp3s0: Link is Up - 1Gbps/Full - flow control off
  1204. [   29.883031] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
  1205. [   43.644014] FS-Cache: Loaded
  1206. [   43.644967] Key type dns_resolver registered
  1207. [   43.674292] FS-Cache: Netfs 'cifs' registered for caching
  1208. [   43.674356] Key type cifs.spnego registered
  1209. [   43.674358] Key type cifs.idmap registered
  1210. [   43.674574] No dialect specified on mount. Default has changed to a more secure dialect, SMB2.1 or later (e.g. SMB3), from CIFS (SMB1). To use the less secure SMB1 dialect to access old servers which do not support SMB3 (or SMB2.1) specify vers=1.0 on mount.
  1211. [   43.674656] No dialect specified on mount. Default has changed to a more secure dialect, SMB2.1 or later (e.g. SMB3), from CIFS (SMB1). To use the less secure SMB1 dialect to access old servers which do not support SMB3 (or SMB2.1) specify vers=1.0 on mount.
  1212. [   43.677458] FS-Cache: Duplicate cookie detected
  1213. [   43.677461] FS-Cache: O-cookie c=00000000a70fd60f [p=000000007e0a5b2c fl=222 nc=0 na=1]
  1214. [   43.677462] FS-Cache: O-cookie d=00000000b00e9b0b n=000000006ace48c1
  1215. [   43.677463] FS-Cache: O-key=[8] '020001bdc0a84d13'
  1216. [   43.677466] FS-Cache: N-cookie c=000000009146b2e2 [p=000000007e0a5b2c fl=2 nc=0 na=1]
  1217. [   43.677467] FS-Cache: N-cookie d=00000000b00e9b0b n=000000009e3e6b04
  1218. [   43.677467] FS-Cache: N-key=[8] '020001bdc0a84d13'
  1219. [  371.022190] IPv6: ADDRCONF(NETDEV_UP): wlp6s0: link is not ready
  1220. [  461.109458] PM: suspend entry (deep)
  1221. [  461.109460] PM: Syncing filesystems ... done.
  1222. [  461.507247] Freezing user space processes ... (elapsed 0.001 seconds) done.
  1223. [  461.508534] OOM killer disabled.
  1224. [  461.508534] Freezing remaining freezable tasks ... (elapsed 1.291 seconds) done.
  1225. [  462.799854] Suspending console(s) (use no_console_suspend to debug)
  1226. [  462.801560] parport_pc 00:06: disabled
  1227. [  462.801931] serial 00:05: disabled
  1228. [  462.823551] sd 3:0:0:0: [sdb] Synchronizing SCSI cache
  1229. [  462.823759] sd 3:0:0:0: [sdb] Stopping disk
  1230. [  462.831519] sd 0:0:0:0: [sda] Synchronizing SCSI cache
  1231. [  462.833364] sd 0:0:0:0: [sda] Stopping disk
  1232. [  463.911765] ACPI: Preparing to enter system sleep state S3
  1233. [  463.912172] PM: Saving platform NVS memory
  1234. [  463.912180] Disabling non-boot CPUs ...
  1235. [  463.928722] smpboot: CPU 1 is now offline
  1236. [  463.952846] smpboot: CPU 2 is now offline
  1237. [  463.968914] smpboot: CPU 3 is now offline
  1238. [  463.973150] ACPI: Low-level resume complete
  1239. [  463.973185] PM: Restoring platform NVS memory
  1240. [  463.975339] Enabling non-boot CPUs ...
  1241. [  463.975370] x86: Booting SMP configuration:
  1242. [  463.975371] smpboot: Booting Node 0 Processor 1 APIC 0x2
  1243. [  463.976808]  cache: parent cpu1 should not be sleeping
  1244. [  463.976933] CPU1 is up
  1245. [  463.976949] smpboot: Booting Node 0 Processor 2 APIC 0x4
  1246. [  463.978384]  cache: parent cpu2 should not be sleeping
  1247. [  463.978520] CPU2 is up
  1248. [  463.978537] smpboot: Booting Node 0 Processor 3 APIC 0x6
  1249. [  463.979976]  cache: parent cpu3 should not be sleeping
  1250. [  463.980345] CPU3 is up
  1251. [  463.989247] ACPI: Waking up from system sleep state S3
  1252. [  464.035893] serial 00:05: activated
  1253. [  464.036538] parport_pc 00:06: activated
  1254. [  464.051894] sd 0:0:0:0: [sda] Starting disk
  1255. [  464.051912] sd 3:0:0:0: [sdb] Starting disk
  1256. [  464.376709] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
  1257. [  464.376741] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  1258. [  464.379809] ata1.00: supports DRM functions and may not be fully accessible
  1259. [  464.386535] ata1.00: disabling queued TRIM support
  1260. [  464.393901] ata1.00: supports DRM functions and may not be fully accessible
  1261. [  464.394115] ata3.00: configured for UDMA/133
  1262. [  464.400780] ata1.00: disabling queued TRIM support
  1263. [  464.407631] ata1.00: configured for UDMA/133
  1264. [  465.265680] r8169 0000:03:00.0 enp3s0: Link is Down
  1265. [  465.397949] OOM killer enabled.
  1266. [  465.397952] Restarting tasks ...
  1267. [  465.398227] pci_bus 0000:05: Allocating resources
  1268. [  465.398254] pci 0000:04:00.0: bridge window [io  0x1000-0x0fff] to [bus 05] add_size 1000
  1269. [  465.398264] pci 0000:04:00.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05] add_size 200000 add_align 100000
  1270. [  465.398268] pci 0000:04:00.0: bridge window [mem 0x00100000-0x000fffff] to [bus 05] add_size 200000 add_align 100000
  1271. [  465.398276] pci 0000:04:00.0: BAR 14: no space for [mem size 0x00200000]
  1272. [  465.398279] pci 0000:04:00.0: BAR 14: failed to assign [mem size 0x00200000]
  1273. [  465.398283] pci 0000:04:00.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
  1274. [  465.398286] pci 0000:04:00.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
  1275. [  465.398289] pci 0000:04:00.0: BAR 13: no space for [io  size 0x1000]
  1276. [  465.398291] pci 0000:04:00.0: BAR 13: failed to assign [io  size 0x1000]
  1277. [  465.398297] pci 0000:04:00.0: BAR 14: no space for [mem size 0x00200000]
  1278. [  465.398299] pci 0000:04:00.0: BAR 14: failed to assign [mem size 0x00200000]
  1279. [  465.398303] pci 0000:04:00.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
  1280. [  465.398305] pci 0000:04:00.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
  1281. [  465.398308] pci 0000:04:00.0: BAR 13: no space for [io  size 0x1000]
  1282. [  465.398311] pci 0000:04:00.0: BAR 13: failed to assign [io  size 0x1000]
  1283. [  465.398314] pci 0000:04:00.0: PCI bridge to [bus 05]
  1284. [  465.406804] done.
  1285. [  465.406924] video LNXVIDEO:00: Restoring backlight state
  1286. [  465.410355] PM: suspend exit
  1287. [  466.533298] r8169 0000:03:00.0 enp3s0: Link is Up - 1Gbps/Full - flow control off
  1288. [  469.413142] ata4: link is slow to respond, please be patient (ready=0)
  1289. [  470.013114] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
  1290. [  470.015344] ata4.00: configured for UDMA/133
  1291. [  470.158325] IPv6: ADDRCONF(NETDEV_UP): wlp6s0: link is not ready
  1292. [  470.162659] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
  1293. [  470.162934] RTL8211E Gigabit Ethernet r8169-300:00: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=r8169-300:00, irq=IGNORE)
  1294. [  470.370435] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
  1295. [  470.371697] IPv6: ADDRCONF(NETDEV_UP): wlp6s0: link is not ready
  1296. [  470.445055] snd_hda_codec_hdmi hdaudioC2D0: HDMI: invalid ELD data byte 2
  1297. [  470.484615] IPv6: ADDRCONF(NETDEV_UP): wlp6s0: link is not ready
  1298. [  470.684374] snd_hda_codec_hdmi hdaudioC2D0: HDMI: invalid ELD data byte 15
  1299. [  471.165049] snd_hda_codec_hdmi hdaudioC2D0: HDMI: invalid ELD data byte 34
  1300. [  473.136989] r8169 0000:03:00.0 enp3s0: Link is Up - 1Gbps/Full - flow control off
  1301. [  473.137026] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
  1302. [  492.804800] snd_hda_codec_hdmi hdaudioC2D0: HDMI: invalid ELD data byte 3
  1303. [  506.209170] PM: suspend entry (deep)
  1304. [  506.209171] PM: Syncing filesystems ... done.
  1305. [  506.619821] Freezing user space processes ... (elapsed 0.001 seconds) done.
  1306. [  506.621142] OOM killer disabled.
  1307. [  506.621142] Freezing remaining freezable tasks ... (elapsed 2.776 seconds) done.
  1308. [  509.397929] Suspending console(s) (use no_console_suspend to debug)
  1309. [  509.399794] parport_pc 00:06: disabled
  1310. [  509.400180] serial 00:05: disabled
  1311. [  509.424531] sd 0:0:0:0: [sda] Synchronizing SCSI cache
  1312. [  509.424604] sd 3:0:0:0: [sdb] Synchronizing SCSI cache
  1313. [  509.424780] sd 3:0:0:0: [sdb] Stopping disk
  1314. [  509.426406] sd 0:0:0:0: [sda] Stopping disk
  1315. [  510.125272] ACPI: Preparing to enter system sleep state S3
  1316. [  510.126081] PM: Saving platform NVS memory
  1317. [  510.126097] Disabling non-boot CPUs ...
  1318. [  510.142037] smpboot: CPU 1 is now offline
  1319. [  510.161980] smpboot: CPU 2 is now offline
  1320. [  510.177902] smpboot: CPU 3 is now offline
  1321. [  510.181021] ACPI: Low-level resume complete
  1322. [  510.181056] PM: Restoring platform NVS memory
  1323. [  510.183210] Enabling non-boot CPUs ...
  1324. [  510.183240] x86: Booting SMP configuration:
  1325. [  510.183241] smpboot: Booting Node 0 Processor 1 APIC 0x2
  1326. [  510.184692]  cache: parent cpu1 should not be sleeping
  1327. [  510.184818] CPU1 is up
  1328. [  510.184835] smpboot: Booting Node 0 Processor 2 APIC 0x4
  1329. [  510.186281]  cache: parent cpu2 should not be sleeping
  1330. [  510.186418] CPU2 is up
  1331. [  510.186435] smpboot: Booting Node 0 Processor 3 APIC 0x6
  1332. [  510.187885]  cache: parent cpu3 should not be sleeping
  1333. [  510.188256] CPU3 is up
  1334. [  510.197130] ACPI: Waking up from system sleep state S3
  1335. [  510.240997] serial 00:05: activated
  1336. [  510.241612] parport_pc 00:06: activated
  1337. [  510.259925] sd 0:0:0:0: [sda] Starting disk
  1338. [  510.259951] sd 3:0:0:0: [sdb] Starting disk
  1339. [  510.442380] usb 2-9: reset high-speed USB device number 3 using xhci_hcd
  1340. [  510.577571] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  1341. [  510.577604] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
  1342. [  510.580678] ata1.00: supports DRM functions and may not be fully accessible
  1343. [  510.587479] ata1.00: disabling queued TRIM support
  1344. [  510.595065] ata3.00: configured for UDMA/133
  1345. [  510.595078] ata1.00: supports DRM functions and may not be fully accessible
  1346. [  510.601751] ata1.00: disabling queued TRIM support
  1347. [  510.608526] ata1.00: configured for UDMA/133
  1348. [  510.890451] usb 2-9.1: reset full-speed USB device number 5 using xhci_hcd
  1349. [  511.070454] usb 2-9.2: reset full-speed USB device number 6 using xhci_hcd
  1350. [  511.442660] r8169 0000:03:00.0 enp3s0: Link is Down
  1351. [  511.599146] OOM killer enabled.
  1352. [  511.599148] Restarting tasks ...
  1353. [  511.599624] pci_bus 0000:05: Allocating resources
  1354. [  511.599650] pci 0000:04:00.0: bridge window [io  0x1000-0x0fff] to [bus 05] add_size 1000
  1355. [  511.599657] pci 0000:04:00.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05] add_size 200000 add_align 100000
  1356. [  511.599661] pci 0000:04:00.0: bridge window [mem 0x00100000-0x000fffff] to [bus 05] add_size 200000 add_align 100000
  1357. [  511.599668] pci 0000:04:00.0: BAR 14: no space for [mem size 0x00200000]
  1358. [  511.599671] pci 0000:04:00.0: BAR 14: failed to assign [mem size 0x00200000]
  1359. [  511.599675] pci 0000:04:00.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
  1360. [  511.599678] pci 0000:04:00.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
  1361. [  511.599681] pci 0000:04:00.0: BAR 13: no space for [io  size 0x1000]
  1362. [  511.599684] pci 0000:04:00.0: BAR 13: failed to assign [io  size 0x1000]
  1363. [  511.599688] pci 0000:04:00.0: BAR 14: no space for [mem size 0x00200000]
  1364. [  511.599691] pci 0000:04:00.0: BAR 14: failed to assign [mem size 0x00200000]
  1365. [  511.599695] pci 0000:04:00.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
  1366. [  511.599697] pci 0000:04:00.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
  1367. [  511.599700] pci 0000:04:00.0: BAR 13: no space for [io  size 0x1000]
  1368. [  511.599703] pci 0000:04:00.0: BAR 13: failed to assign [io  size 0x1000]
  1369. [  511.599707] pci 0000:04:00.0: PCI bridge to [bus 05]
  1370. [  511.610086] done.
  1371. [  511.610183] video LNXVIDEO:00: Restoring backlight state
  1372. [  511.610677] PM: suspend exit
  1373. [  512.470085] snd_hda_codec_hdmi hdaudioC2D0: HDMI: invalid ELD data byte 58
  1374. [  512.594083] snd_hda_codec_hdmi hdaudioC2D0: HDMI: invalid ELD data byte 3
  1375. [  512.786080] snd_hda_codec_hdmi hdaudioC2D0: HDMI: invalid ELD data byte 12
  1376. [  513.310063] snd_hda_codec_hdmi hdaudioC2D0: HDMI: invalid ELD data byte 36
  1377. [  513.522405] r8169 0000:03:00.0 enp3s0: Link is Up - 1Gbps/Full - flow control off
  1378. [  515.630099] ata4: link is slow to respond, please be patient (ready=0)
  1379. [  516.170094] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
  1380. [  516.172306] ata4.00: configured for UDMA/133
  1381. [  516.317258] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
  1382. [  516.317571] RTL8211E Gigabit Ethernet r8169-300:00: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=r8169-300:00, irq=IGNORE)
  1383. [  516.519497] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
  1384. [  516.522647] IPv6: ADDRCONF(NETDEV_UP): wlp6s0: link is not ready
  1385. [  516.539907] IPv6: ADDRCONF(NETDEV_UP): wlp6s0: link is not ready
  1386. [  516.588729] IPv6: ADDRCONF(NETDEV_UP): wlp6s0: link is not ready
  1387. [  519.181467] r8169 0000:03:00.0 enp3s0: Link is Up - 1Gbps/Full - flow control off
  1388. [  519.181480] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
  1389. [  531.597650] snd_hda_codec_hdmi hdaudioC2D0: HDMI: invalid ELD data byte 2
  1390. [  544.851959] PM: suspend entry (deep)
  1391. [  544.851960] PM: Syncing filesystems ... done.
  1392. [  545.367825] snd_hda_codec_hdmi hdaudioC2D0: HDMI: invalid ELD data byte 4
  1393. [  545.564979] snd_hda_codec_hdmi hdaudioC2D0: HDMI: invalid ELD data byte 12
  1394. [  546.065872] snd_hda_codec_hdmi hdaudioC2D0: HDMI: invalid ELD data byte 33
  1395. [  565.559276] snd_hda_codec_hdmi hdaudioC2D0: HDMI: invalid ELD data byte 3
  1396.  

Quellcode

Hier kannst du den Code kopieren und ihn in deinen bevorzugten Editor einfügen. Alternativ kannst du den gesamten Eintrag auch als Datei herunterladen.