Pastebin

dmesg

von ottonormal

Dein Code:
  1. root@debian:~# dmesg
  2. [    0.000000] Linux version 4.19.0-8-amd64 (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP Debian 4.19.98-1 (2020-01-26)
  3. [    0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.19.0-8-amd64 root=UUID=8c1d2bbd-661e-4941-9327-6d6d0ab3f902 ro quiet loglevel=2
  4. [    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
  5. [    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
  6. [    0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
  7. [    0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
  8. [    0.000000] x86/fpu: xstate_offset[3]:  576, xstate_sizes[3]:   64
  9. [    0.000000] x86/fpu: xstate_offset[4]:  640, xstate_sizes[4]:   64
  10. [    0.000000] x86/fpu: Enabled xstate features 0x1b, context size is 704 bytes, using 'compacted''s manufacturer)
  11. [    0.529200] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
  12. [    0.529341] smp: Bringing up secondary CPUs ...
  13. [    0.529567] x86: Booting SMP configuration:
  14. [    0.529570] .... node  #0, CPUs:      #1 #2 #3
  15. [    0.531536] smp: Brought up 1 node, 4 CPUs
  16. [    0.531536] smpboot: Max logical packages: 1
  17. [    0.531536] smpboot: Total of 4 processors activated (11980.80 BogoMIPS)
  18. [    0.534111] devtmpfs: initialized
  19. [    0.534111] x86/mm: Memory block size: 128MB
  20. [    0.536313] PM: Registering ACPI NVS region [mem 0x794a4000-0x798a7fff] (4210688 bytes)
  21. [    0.536313] PM: Registering ACPI NVS region [mem 0x79fba000-0x79fbafff] (4096 bytes)
  22. [    0.536313] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  23. [    0.536313] futex hash table entries: 1024 (order: 4, 65536 bytes)
  24. [    0.536313] pinctrl core: initialized pinctrl subsystem
  25. [    0.537824] NET: Registered protocol family 16
  26. [    0.538012] audit: initializing netlink subsys (disabled)
  27. [    0.538028] audit: type=2000 audit(1582930715.052:1): state=initialized audit_enabled=0 res=1
  28. [    0.538028] cpuidle: using governor ladder
  29. [    0.538028] cpuidle: using governor menu
  30. [    0.538028] ACPI: bus type PCI registered
  31. [    0.538028] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
  32. [    0.539514] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
  33. [    0.539519] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
  34. [    0.539548] PCI: Using configuration type 1 for base access
  35. [    0.539833] mtrr: your CPUs had inconsistent variable MTRR settings
  36. [    0.539835] mtrr: probably your BIOS does not setup all CPUs.
  37. [    0.539835] mtrr: corrected configuration.
  38. [    0.541073] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
  39. [    0.541073] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
  40. [    0.541073] ACPI: Added _OSI(Module Device)
  41. [    0.541073] ACPI: Added _OSI(Processor Device)
  42. [    0.541073] ACPI: Added _OSI(3.0 _SCP Extensions)
  43. [    0.541073] ACPI: Added _OSI(Processor Aggregator Device)
  44. [    0.541073] ACPI: Added _OSI(Linux-Dell-Video)
  45. [    0.541073] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
  46. [    0.554426] ACPI: 9 ACPI AML tables successfully acquired and loaded
  47. [    0.559552] ACPI: Dynamic OEM Table Load:
  48. [    0.559563] ACPI: SSDT 0xFFFF95D9B5C93A00 00015F (v02 PmRef  ApIst    00003000 INTL 20120913)
  49. [    0.561334] ACPI: EC: EC started
  50. [    0.561336] ACPI: EC: interrupt blocked
  51. [    0.561422] ACPI: \_SB_.PCI0.SBRG.H_EC: Used as first EC
  52. [    0.561425] ACPI: \_SB_.PCI0.SBRG.H_EC: GPE=0x40, EC_CMD/EC_SC=0x66, EC_DATA=0x62
  53. [    0.561428] ACPI: \_SB_.PCI0.SBRG.H_EC: Used as boot DSDT EC to handle transactions
  54. [    0.561429] ACPI: Interpreter enabled
  55. [    0.561478] ACPI: (supports S0 S3 S4 S5)
  56. [    0.561480] ACPI: Using IOAPIC for interrupt routing
  57. [    0.561538] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
  58. [    0.562102] ACPI: Enabled 1 GPEs in block 00 to 7F
  59. [    0.577258] ACPI: Power Resource [FN00] (on)
  60. [    0.578712] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
  61. [    0.578721] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
  62. [    0.579998] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
  63. [    0.581280] PCI host bridge to bus 0000:00
  64. [    0.581285] pci_bus 0000:00: root bus resource [io  0x0070-0x0077]
  65. [    0.581287] pci_bus 0000:00: root bus resource [io  0x0000-0x006f window]
  66. [    0.581290] pci_bus 0000:00: root bus resource [io  0x0078-0x0cf7 window]
  67. [    0.581292] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
  68. [    0.581294] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
  69. [    0.581297] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
  70. [    0.581299] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window]
  71. [    0.581301] pci_bus 0000:00: root bus resource [mem 0x7c000001-0x7fffffff window]
  72. [    0.581303] pci_bus 0000:00: root bus resource [mem 0x7b800001-0x7bffffff window]
  73. [    0.581306] pci_bus 0000:00: root bus resource [mem 0x80000000-0xcfffffff window]
  74. [    0.581308] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff window]
  75. [    0.581311] pci_bus 0000:00: root bus resource [bus 00-ff]
  76. [    0.581328] pci 0000:00:00.0: [8086:5af0] type 00 class 0x060000
  77. [    0.581844] pci 0000:00:02.0: [8086:5a85] type 00 class 0x030000
  78. [    0.581866] pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x90ffffff 64bit]
  79. [    0.581877] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff 64bit pref]
  80. [    0.581885] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
  81. [    0.582413] pci 0000:00:0e.0: [8086:5a98] type 00 class 0x040380
  82. [    0.582441] pci 0000:00:0e.0: reg 0x10: [mem 0x91410000-0x91413fff 64bit]
  83. [    0.582474] pci 0000:00:0e.0: reg 0x20: [mem 0x91000000-0x910fffff 64bit]
  84. [    0.582542] pci 0000:00:0e.0: PME# supported from D0 D3hot D3cold
  85. [    0.583042] pci 0000:00:0f.0: [8086:5a9a] type 00 class 0x078000
  86. [    0.583086] pci 0000:00:0f.0: reg 0x10: [mem 0x91427000-0x91427fff 64bit]
  87. [    0.583213] pci 0000:00:0f.0: PME# supported from D3hot
  88. [    0.583653] pci 0000:00:0f.1: [8086:5a9c] type 00 class 0x078000
  89. [    0.583697] pci 0000:00:0f.1: reg 0x10: [mem 0x91426000-0x91426fff 64bit]
  90. [    0.583826] pci 0000:00:0f.1: PME# supported from D3hot
  91. [    0.584240] pci 0000:00:0f.2: [8086:5a9e] type 00 class 0x078000
  92. [    0.584284] pci 0000:00:0f.2: reg 0x10: [mem 0x91425000-0x91425fff 64bit]
  93. [    0.584413] pci 0000:00:0f.2: PME# supported from D3hot
  94. [    0.584844] pci 0000:00:12.0: [8086:5ae3] type 00 class 0x010601
  95. [    0.584867] pci 0000:00:12.0: reg 0x10: [mem 0x91414000-0x91415fff]
  96. [    0.584876] pci 0000:00:12.0: reg 0x14: [mem 0x91424000-0x914240ff]
  97. [    0.584886] pci 0000:00:12.0: reg 0x18: [io  0xf090-0xf097]
  98. [    0.584896] pci 0000:00:12.0: reg 0x1c: [io  0xf080-0xf083]
  99. [    0.584905] pci 0000:00:12.0: reg 0x20: [io  0xf060-0xf07f]
  100. [    0.584915] pci 0000:00:12.0: reg 0x24: [mem 0x91423000-0x914237ff]
  101. [    0.584964] pci 0000:00:12.0: PME# supported from D3hot
  102. [    0.585372] pci 0000:00:13.0: [8086:5ad8] type 01 class 0x060400
  103. [    0.585476] pci 0000:00:13.0: PME# supported from D0 D3hot D3cold
  104. [    0.585898] pci 0000:00:13.1: [8086:5ad9] type 01 class 0x060400
  105. [    0.585995] pci 0000:00:13.1: PME# supported from D0 D3hot D3cold
  106. [    0.586418] pci 0000:00:13.2: [8086:5ada] type 01 class 0x060400
  107. [    0.586516] pci 0000:00:13.2: PME# supported from D0 D3hot D3cold
  108. [    0.586961] pci 0000:00:15.0: [8086:5aa8] type 00 class 0x0c0330
  109. [    0.586992] pci 0000:00:15.0: reg 0x10: [mem 0x91400000-0x9140ffff 64bit]
  110. [    0.587074] pci 0000:00:15.0: PME# supported from D3hot D3cold
  111. [    0.587510] pci 0000:00:16.0: [8086:5aac] type 00 class 0x118000
  112. [    0.587539] pci 0000:00:16.0: reg 0x10: [mem 0x91422000-0x91422fff 64bit]
  113. [    0.587554] pci 0000:00:16.0: reg 0x18: [mem 0x91421000-0x91421fff 64bit]
  114. [    0.588051] pci 0000:00:18.0: [8086:5abc] type 00 class 0x118000
  115. [    0.588082] pci 0000:00:18.0: reg 0x10: [mem 0x91420000-0x91420fff 64bit]
  116. [    0.588098] pci 0000:00:18.0: reg 0x18: [mem 0x9141f000-0x9141ffff 64bit]
  117. [    0.588592] pci 0000:00:19.0: [8086:5ac2] type 00 class 0x118000
  118. [    0.588620] pci 0000:00:19.0: reg 0x10: [mem 0x9141e000-0x9141efff 64bit]
  119. [    0.588637] pci 0000:00:19.0: reg 0x18: [mem 0x9141d000-0x9141dfff 64bit]
  120. [    0.589118] pci 0000:00:19.1: [8086:5ac4] type 00 class 0x118000
  121. [    0.589150] pci 0000:00:19.1: reg 0x10: [mem 0x9141c000-0x9141cfff 64bit]
  122. [    0.589167] pci 0000:00:19.1: reg 0x18: [mem 0x9141b000-0x9141bfff 64bit]
  123. [    0.589628] pci 0000:00:19.2: [8086:5ac6] type 00 class 0x118000
  124. [    0.589657] pci 0000:00:19.2: reg 0x10: [mem 0x9141a000-0x9141afff 64bit]
  125. [    0.589672] pci 0000:00:19.2: reg 0x18: [mem 0x91419000-0x91419fff 64bit]
  126. [    0.590174] pci 0000:00:1a.0: [8086:5ac8] type 00 class 0x0c8000
  127. [    0.590204] pci 0000:00:1a.0: reg 0x10: [mem 0x91418000-0x91418fff 64bit]
  128. [    0.590219] pci 0000:00:1a.0: reg 0x18: [mem 0x91417000-0x91417fff 64bit]
  129. [    0.590288] pci 0000:00:1a.0: PME# supported from D0 D3hot
  130. [    0.590711] pci 0000:00:1f.0: [8086:5ae8] type 00 class 0x060100
  131. [    0.591258] pci 0000:00:1f.1: [8086:5ad4] type 00 class 0x0c0500
  132. [    0.591328] pci 0000:00:1f.1: reg 0x10: [mem 0x91416000-0x914160ff 64bit]
  133. [    0.591406] pci 0000:00:1f.1: reg 0x20: [io  0xf040-0xf05f]
  134. [    0.591988] pci 0000:01:00.0: [10ec:5229] type 00 class 0xff0000
  135. [    0.592025] pci 0000:01:00.0: reg 0x10: [mem 0x91300000-0x91300fff]
  136. [    0.592125] pci 0000:01:00.0: Upstream bridge's Max Payload Size set to 128 (was 256, max 256)
  137. [    0.592132] pci 0000:01:00.0: Max Payload Size set to 128 (was 128, max 128)
  138. [    0.592218] pci 0000:01:00.0: supports D1 D2
  139. [    0.592220] pci 0000:01:00.0: PME# supported from D1 D2 D3hot
  140. [    0.592371] pci 0000:00:13.0: PCI bridge to [bus 01]
  141. [    0.592378] pci 0000:00:13.0:   bridge window [mem 0x91300000-0x913fffff]
  142. [    0.592490] pci 0000:02:00.0: [8086:24fb] type 00 class 0x028000
  143. [    0.592549] pci 0000:02:00.0: reg 0x10: [mem 0x91200000-0x91201fff 64bit]
  144. [    0.592642] pci 0000:02:00.0: Upstream bridge's Max Payload Size set to 128 (was 256, max 256)
  145. [    0.592651] pci 0000:02:00.0: Max Payload Size set to 128 (was 128, max 128)
  146. [    0.592777] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
  147. [    0.592958] pci 0000:00:13.1: PCI bridge to [bus 02]
  148. [    0.592965] pci 0000:00:13.1:   bridge window [mem 0x91200000-0x912fffff]
  149. [    0.593070] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
  150. [    0.593109] pci 0000:03:00.0: reg 0x10: [io  0xe000-0xe0ff]
  151. [    0.593149] pci 0000:03:00.0: reg 0x18: [mem 0x91104000-0x91104fff 64bit]
  152. [    0.593172] pci 0000:03:00.0: reg 0x20: [mem 0x91100000-0x91103fff 64bit]
  153. [    0.593197] pci 0000:03:00.0: Upstream bridge's Max Payload Size set to 128 (was 256, max 256)
  154. [    0.593205] pci 0000:03:00.0: Max Payload Size set to 128 (was 128, max 128)
  155. [    0.593314] pci 0000:03:00.0: supports D1 D2
  156. [    0.593316] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
  157. [    0.593486] pci 0000:00:13.2: PCI bridge to [bus 03]
  158. [    0.593491] pci 0000:00:13.2:   bridge window [io  0xe000-0xefff]
  159. [    0.593496] pci 0000:00:13.2:   bridge window [mem 0x91100000-0x911fffff]
  160. [    0.594556] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
  161. [    0.594668] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
  162. [    0.594777] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
  163. [    0.594886] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
  164. [    0.594995] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
  165. [    0.595103] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
  166. [    0.595212] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
  167. [    0.595321] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
  168. [    0.596046] ACPI: EC: interrupt unblocked
  169. [    0.596106] ACPI: EC: event unblocked
  170. [    0.596138] ACPI: \_SB_.PCI0.SBRG.H_EC: GPE=0x40, EC_CMD/EC_SC=0x66, EC_DATA=0x62
  171. [    0.596140] ACPI: \_SB_.PCI0.SBRG.H_EC: Used as boot DSDT EC to handle transactions and events
  172. [    0.596276] pci 0000:00:02.0: vgaarb: setting as boot VGA device
  173. [    0.596276] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
  174. [    0.596276] pci 0000:00:02.0: vgaarb: bridge control possible
  175. [    0.596276] vgaarb: loaded
  176. [    0.596276] pps_core: LinuxPPS API ver. 1 registered
  177. [    0.596276] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  178. [    0.596276] PTP clock support registered
  179. [    0.596276] EDAC MC: Ver: 3.0.0
  180. [    0.596276] PCI: Using ACPI for IRQ routing
  181. [    0.626437] PCI: pci_cache_line_size set to 64 bytes
  182. [    0.626547] e820: reserve RAM buffer [mem 0x0009b400-0x0009ffff]
  183. [    0.626550] e820: reserve RAM buffer [mem 0x77364000-0x77ffffff]
  184. [    0.626551] e820: reserve RAM buffer [mem 0x79fba000-0x7bffffff]
  185. [    0.626553] e820: reserve RAM buffer [mem 0x7a9df000-0x7bffffff]
  186. [    0.626555] e820: reserve RAM buffer [mem 0x7b000000-0x7bffffff]
  187. [    0.626756] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
  188. [    0.626756] hpet0: 8 comparators, 64-bit 19.200000 MHz counter
  189. [    0.628455] clocksource: Switched to clocksource tsc-early
  190. [    0.648860] VFS: Disk quotas dquot_6.6.0
  191. [    0.648893] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  192. [    0.649135] AppArmor: AppArmor Filesystem Enabled
  193. [    0.649170] pnp: PnP ACPI init
  194. [    0.649826] system 00:00: [io  0x0a00-0x0a1f] has been reserved
  195. [    0.649829] system 00:00: [io  0x0a20-0x0a2f] has been reserved
  196. [    0.649831] system 00:00: [io  0x0a30-0x0a3f] has been reserved
  197. [    0.649834] system 00:00: [io  0x0a40-0x0a4f] has been reserved
  198. [    0.649836] system 00:00: [io  0x0a50-0x0a5f] has been reserved
  199. [    0.649839] system 00:00: [io  0x0a60-0x0a6f] has been reserved
  200. [    0.649849] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
  201. [    0.650244] pnp 00:01: [dma 0 disabled]
  202. [    0.650304] pnp 00:01: Plug and Play ACPI device, IDs ITE8708 (active)
  203. [    0.650397] system 00:02: [io  0x0680-0x069f] has been reserved
  204. [    0.650401] system 00:02: [io  0x0400-0x047f] could not be reserved
  205. [    0.650403] system 00:02: [io  0x0500-0x05fe] has been reserved
  206. [    0.650406] system 00:02: [io  0x0600-0x061f] has been reserved
  207. [    0.650409] system 00:02: [io  0x164e-0x164f] has been reserved
  208. [    0.650416] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
  209. [    0.651025] system 00:03: [mem 0xe0000000-0xefffffff] has been reserved
  210. [    0.651028] system 00:03: [mem 0xfea00000-0xfeafffff] has been reserved
  211. [    0.651031] system 00:03: [mem 0xfed01000-0xfed01fff] has been reserved
  212. [    0.651034] system 00:03: [mem 0xfed03000-0xfed03fff] has been reserved
  213. [    0.651036] system 00:03: [mem 0xfed06000-0xfed06fff] has been reserved
  214. [    0.651039] system 00:03: [mem 0xfed08000-0xfed09fff] has been reserved
  215. [    0.651041] system 00:03: [mem 0xfed80000-0xfedbffff] has been reserved
  216. [    0.651044] system 00:03: [mem 0xfed1c000-0xfed1cfff] has been reserved
  217. [    0.651047] system 00:03: [mem 0xfee00000-0xfeefffff] could not be reserved
  218. [    0.651054] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
  219. [    0.651294] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
  220. [    0.651573] pnp: PnP ACPI: found 5 devices
  221. [    0.659566] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
  222. [    0.659610] pci 0000:00:13.0: PCI bridge to [bus 01]
  223. [    0.659618] pci 0000:00:13.0:   bridge window [mem 0x91300000-0x913fffff]
  224. [    0.659627] pci 0000:00:13.1: PCI bridge to [bus 02]
  225. [    0.659633] pci 0000:00:13.1:   bridge window [mem 0x91200000-0x912fffff]
  226. [    0.659640] pci 0000:00:13.2: PCI bridge to [bus 03]
  227. [    0.659644] pci 0000:00:13.2:   bridge window [io  0xe000-0xefff]
  228. [    0.659649] pci 0000:00:13.2:   bridge window [mem 0x91100000-0x911fffff]
  229. [    0.659660] pci_bus 0000:00: resource 4 [io  0x0070-0x0077]
  230. [    0.659663] pci_bus 0000:00: resource 5 [io  0x0000-0x006f window]
  231. [    0.659665] pci_bus 0000:00: resource 6 [io  0x0078-0x0cf7 window]
  232. [    0.659667] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
  233. [    0.659670] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
  234. [    0.659672] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
  235. [    0.659674] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window]
  236. [    0.659677] pci_bus 0000:00: resource 11 [mem 0x7c000001-0x7fffffff window]
  237. [    0.659679] pci_bus 0000:00: resource 12 [mem 0x7b800001-0x7bffffff window]
  238. [    0.659682] pci_bus 0000:00: resource 13 [mem 0x80000000-0xcfffffff window]
  239. [    0.659684] pci_bus 0000:00: resource 14 [mem 0xe0000000-0xefffffff window]
  240. [    0.659687] pci_bus 0000:01: resource 1 [mem 0x91300000-0x913fffff]
  241. [    0.659689] pci_bus 0000:02: resource 1 [mem 0x91200000-0x912fffff]
  242. [    0.659692] pci_bus 0000:03: resource 0 [io  0xe000-0xefff]
  243. [    0.659694] pci_bus 0000:03: resource 1 [mem 0x91100000-0x911fffff]
  244. [    0.659918] NET: Registered protocol family 2
  245. [    0.660212] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes)
  246. [    0.660306] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
  247. [    0.660700] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
  248. [    0.661213] TCP: Hash tables configured (established 65536 bind 65536)
  249. [    0.661329] UDP hash table entries: 4096 (order: 5, 131072 bytes)
  250. [    0.661440] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
  251. [    0.661631] NET: Registered protocol family 1
  252. [    0.661645] NET: Registered protocol family 44
  253. [    0.661668] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
  254. [    0.662201] PCI: CLS 0 bytes, default 64
  255. [    0.662287] Unpacking initramfs...
  256. [    1.225381] Freeing initrd memory: 18104K
  257. [    1.239435] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
  258. [    1.239438] software IO TLB: mapped [mem 0x73364000-0x77364000] (64MB)
  259. [    1.239498] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x159647815e3, max_idle_ns: 440795269835 ns
  260. [    1.239523] clocksource: Switched to clocksource tsc
  261. [    1.240784] Initialise system trusted keyrings
  262. [    1.240803] Key type blacklist registered
  263. [    1.240903] workingset: timestamp_bits=40 max_order=21 bucket_order=0
  264. [    1.243650] zbud: loaded
  265. [    1.606496] Key type asymmetric registered
  266. [    1.606499] Asymmetric key parser 'x509' registered
  267. [    1.606543] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
  268. [    1.606616] io scheduler noop registered
  269. [    1.606617] io scheduler deadline registered
  270. [    1.606703] io scheduler cfq registered (default)
  271. [    1.606705] io scheduler mq-deadline registered
  272. [    1.607392] pcieport 0000:00:13.0: Signaling PME with IRQ 122
  273. [    1.607736] pcieport 0000:00:13.1: Signaling PME with IRQ 123
  274. [    1.608057] pcieport 0000:00:13.2: Signaling PME with IRQ 124
  275. [    1.608150] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
  276. [    1.608177] intel_idle: Please enable MWAIT in BIOS SETUP
  277. [    1.610522] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  278. [    1.611386] Linux agpgart interface v0.103
  279. [    1.611527] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
  280. [    1.611528] AMD IOMMUv2 functionality not available on this system
  281. [    1.612062] i8042: PNP: No PS/2 controller found.
  282. [    1.612064] i8042: Probing ports directly.
  283. [    1.626988] serio: i8042 KBD port at 0x60,0x64 irq 1
  284. [    1.626999] serio: i8042 AUX port at 0x60,0x64 irq 12
  285. [    1.627226] mousedev: PS/2 mouse device common for all mice
  286. [    1.627321] rtc_cmos 00:04: RTC can wake from S4
  287. [    1.627871] rtc_cmos 00:04: registered as rtc0
  288. [    1.627900] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
  289. [    1.627922] intel_pstate: Intel P-state driver initializing
  290. [    1.628230] ledtrig-cpu: registered to indicate activity on CPUs
  291. [    1.629632] NET: Registered protocol family 10
  292. [    1.644073] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
  293. [    1.645392] Segment Routing with IPv6
  294. [    1.645417] mip6: Mobile IPv6
  295. [    1.645420] NET: Registered protocol family 17
  296. [    1.645473] mpls_gso: MPLS GSO support
  297. [    1.645862] mce: Using 7 MCE banks
  298. [    1.645921] microcode: sig=0x506c9, pf=0x1, revision=0x32
  299. [    1.646013] microcode: Microcode Update Driver: v2.2.
  300. [    1.646031] sched_clock: Marking stable (1642814076, 3191042)->(1674599825, -28594707)
  301. [    1.646321] registered taskstats version 1
  302. [    1.646322] Loading compiled-in X.509 certificates
  303. [    1.707578] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
  304. [    1.707602] Loaded X.509 cert 'Debian Secure Boot Signer: 00a7468def'
  305. [    1.707636] zswap: loaded using pool lzo/zbud
  306. [    1.707747] AppArmor: AppArmor sha1 policy hashing enabled
  307. [    1.708498] rtc_cmos 00:04: setting system clock to 2020-02-28 22:58:37 UTC (1582930717)
  308. [    2.139614] Freeing unused kernel image memory: 1592K
  309. [    2.167426] Write protecting the kernel read-only data: 16384k
  310. [    2.170225] Freeing unused kernel image memory: 2028K
  311. [    2.170574] Freeing unused kernel image memory: 776K
  312. [    2.187195] x86/mm: Checked W+X mappings: passed, no W+X pages found.
  313. [    2.187201] Run /init as init process
  314. [    2.381568] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
  315. [    2.381612] ACPI: Power Button [PWRB]
  316. [    2.381680] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
  317. [    2.381689] ACPI: Sleep Button [SLPB]
  318. [    2.381745] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
  319. [    2.381757] ACPI: Power Button [PWRF]
  320. [    2.404249] thermal LNXTHERM:00: registered as thermal_zone0
  321. [    2.404252] ACPI: Thermal Zone [TZ01] (43 C)
  322. [    2.419648] SCSI subsystem initialized
  323. [    2.432644] ACPI: bus type USB registered
  324. [    2.432681] usbcore: registered new interface driver usbfs
  325. [    2.432693] usbcore: registered new interface driver hub
  326. [    2.432739] usbcore: registered new device driver usb
  327. [    2.437241] libata version 3.00 loaded.
  328. [    2.444395] ahci 0000:00:12.0: version 3.0
  329. [    2.447031] cryptd: max_cpu_qlen set to 1000
  330. [    2.452266] xhci_hcd 0000:00:15.0: xHCI Host Controller
  331. [    2.452277] xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 1
  332. [    2.453365] xhci_hcd 0000:00:15.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000081109810
  333. [    2.453371] xhci_hcd 0000:00:15.0: cache line size of 64 is not supported
  334. [    2.453640] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
  335. [    2.453643] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  336. [    2.453644] usb usb1: Product: xHCI Host Controller
  337. [    2.453646] usb usb1: Manufacturer: Linux 4.19.0-8-amd64 xhci-hcd
  338. [    2.453647] usb usb1: SerialNumber: 0000:00:15.0
  339. [    2.453845] hub 1-0:1.0: USB hub found
  340. [    2.453861] hub 1-0:1.0: 8 ports detected
  341. [    2.454536] xhci_hcd 0000:00:15.0: xHCI Host Controller
  342. [    2.454541] xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 2
  343. [    2.454546] xhci_hcd 0000:00:15.0: Host supports USB 3.0 SuperSpeed
  344. [    2.454594] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
  345. [    2.454596] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  346. [    2.454598] usb usb2: Product: xHCI Host Controller
  347. [    2.454599] usb usb2: Manufacturer: Linux 4.19.0-8-amd64 xhci-hcd
  348. [    2.454601] usb usb2: SerialNumber: 0000:00:15.0
  349. [    2.454731] hub 2-0:1.0: USB hub found
  350. [    2.454746] hub 2-0:1.0: 7 ports detected
  351. [    2.459198] SSE version of gcm_enc/dec engaged.
  352. [    2.459307] ahci 0000:00:12.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
  353. [    2.459310] ahci 0000:00:12.0: flags: 64bit ncq sntf pm clo only pmp pio slum part deso sadm sds apst
  354. [    2.462651] scsi host0: ahci
  355. [    2.465493] scsi host1: ahci
  356. [    2.465662] ata1: SATA max UDMA/133 abar m2048@0x91423000 port 0x91423100 irq 125
  357. [    2.465665] ata2: SATA max UDMA/133 abar m2048@0x91423000 port 0x91423180 irq 125
  358. [    2.562491] [drm] Replacing VGA console driver
  359. [    2.564333] Console: switching to colour dummy device 80x25
  360. [    2.564513] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
  361. [    2.564514] [drm] Driver supports precise vblank timestamp query.
  362. [    2.564626] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
  363. [    2.564800] i915 0000:00:02.0: firmware: failed to load i915/bxt_dmc_ver1_07.bin (-2)
  364. [    2.564801] firmware_class: See https://wiki.debian.org/Firmware for information about missing firmware
  365. [    2.564803] i915 0000:00:02.0: Direct firmware load for i915/bxt_dmc_ver1_07.bin failed with error -2
  366. [    2.564806] i915 0000:00:02.0: Failed to load DMC firmware i915/bxt_dmc_ver1_07.bin. Disabling runtime power management.
  367. [    2.564808] i915 0000:00:02.0: DMC firmware homepage: https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/i915
  368. [    2.781739] ata2: SATA link down (SStatus 4 SControl 300)
  369. [    2.787428] usb 1-4: new high-speed USB device number 2 using xhci_hcd
  370. [    2.857698] [drm] Initialized i915 1.6.0 20180719 for 0000:00:02.0 on minor 0
  371. [    2.859836] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
  372. [    2.860457] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
  373. [    2.909927] fbcon: inteldrmfb (fb0) is primary device
  374. [    2.936847] usb 1-4: New USB device found, idVendor=2109, idProduct=2812, bcdDevice= b.e0
  375. [    2.936851] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  376. [    2.936854] usb 1-4: Product: USB2.0 Hub            
  377. [    2.936856] usb 1-4: Manufacturer: VIA Labs, Inc.        
  378. [    2.937913] hub 1-4:1.0: USB hub found
  379. [    2.938207] hub 1-4:1.0: 4 ports detected
  380. [    2.939456] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
  381. [    2.939726] ata1.00: supports DRM functions and may not be fully accessible
  382. [    2.940170] ata1.00: ATA-11: Samsung SSD 860 EVO 500GB, RVT04B6Q, max UDMA/133
  383. [    2.940174] ata1.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 32), AA
  384. [    2.941912] ata1.00: supports DRM functions and may not be fully accessible
  385. [    2.943762] ata1.00: configured for UDMA/133
  386. [    2.953834] ahci 0000:00:12.0: port does not support device sleep
  387. [    2.954120] scsi 0:0:0:0: Direct-Access     ATA      Samsung SSD 860  4B6Q PQ: 0 ANSI: 5
  388. [    2.990714] Console: switching to colour frame buffer device 210x65
  389. [    3.017539] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
  390. [    3.040845] ata1.00: Enabling discard_zeroes_data
  391. [    3.040913] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
  392. [    3.040927] sd 0:0:0:0: [sda] Write Protect is off
  393. [    3.040930] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  394. [    3.040949] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  395. [    3.041421] ata1.00: Enabling discard_zeroes_data
  396. [    3.043467]  sda: sda1 sda2 sda3 < sda5 sda6 sda7 >
  397. [    3.043984] ata1.00: Enabling discard_zeroes_data
  398. [    3.044934] sd 0:0:0:0: [sda] supports TCG Opal
  399. [    3.044936] sd 0:0:0:0: [sda] Attached SCSI disk
  400. [    3.063506] usb 2-4: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
  401. [    3.109549] device-mapper: uevent: version 1.0.3
  402. [    3.109883] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
  403. [    3.315642] usb 2-4: New USB device found, idVendor=2109, idProduct=0812, bcdDevice= b.e1
  404. [    3.315647] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  405. [    3.315650] usb 2-4: Product: USB3.0 Hub            
  406. [    3.315653] usb 2-4: Manufacturer: VIA Labs, Inc.        
  407. [    3.317370] hub 2-4:1.0: USB hub found
  408. [    3.317687] hub 2-4:1.0: 4 ports detected
  409. [    3.439433] usb 1-8: new full-speed USB device number 3 using xhci_hcd
  410. [    3.588307] usb 1-8: New USB device found, idVendor=8087, idProduct=0aa7, bcdDevice= 0.01
  411. [    3.588311] usb 1-8: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  412. [    3.679445] usb 1-4.1: new high-speed USB device number 4 using xhci_hcd
  413. [    3.792177] usb 1-4.1: New USB device found, idVendor=13fd, idProduct=2040, bcdDevice= 6.06
  414. [    3.792183] usb 1-4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  415. [    3.792187] usb 1-4.1: Product: USB Mass Storage Device
  416. [    3.792191] usb 1-4.1: Manufacturer: TSSTcorp
  417. [    3.792195] usb 1-4.1: SerialNumber: SATAHH000000006ef4d
  418. [    4.067434] usb 1-4.2: new low-speed USB device number 5 using xhci_hcd
  419. [    4.224763] usb 1-4.2: New USB device found, idVendor=0603, idProduct=00f2, bcdDevice= 1.12
  420. [    4.224769] usb 1-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  421. [    4.224772] usb 1-4.2: Product: USB Keyboard
  422. [    4.224776] usb 1-4.2: Manufacturer: NOVATEK
  423. [    4.244866] hidraw: raw HID events driver (C) Jiri Kosina
  424. [    4.255818] usbcore: registered new interface driver usbhid
  425. [    4.255820] usbhid: USB HID core driver
  426. [    4.258172] input: NOVATEK USB Keyboard as /devices/pci0000:00/0000:00:15.0/usb1/1-4/1-4.2/1-4.2:1.0/0003:0603:00F2.0001/input/input7
  427. [    4.315803] hid-generic 0003:0603:00F2.0001: input,hidraw0: USB HID v1.10 Keyboard [NOVATEK USB Keyboard] on usb-0000:00:15.0-4.2/input0
  428. [    4.316130] input: NOVATEK USB Keyboard System Control as /devices/pci0000:00/0000:00:15.0/usb1/1-4/1-4.2/1-4.2:1.1/0003:0603:00F2.0002/input/input8
  429. [    4.363432] usb 1-4.3: new low-speed USB device number 6 using xhci_hcd
  430. [    4.375590] input: NOVATEK USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:15.0/usb1/1-4/1-4.2/1-4.2:1.1/0003:0603:00F2.0002/input/input9
  431. [    4.375729] input: NOVATEK USB Keyboard as /devices/pci0000:00/0000:00:15.0/usb1/1-4/1-4.2/1-4.2:1.1/0003:0603:00F2.0002/input/input10
  432. [    4.375967] hid-generic 0003:0603:00F2.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [NOVATEK USB Keyboard] on usb-0000:00:15.0-4.2/input1
  433. [    4.519948] usb 1-4.3: New USB device found, idVendor=1bcf, idProduct=0005, bcdDevice= 0.14
  434. [    4.519954] usb 1-4.3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
  435. [    4.519958] usb 1-4.3: Product: USB Optical Mouse
  436. [    4.528542] input: USB Optical Mouse as /devices/pci0000:00/0000:00:15.0/usb1/1-4/1-4.3/1-4.3:1.0/0003:1BCF:0005.0003/input/input11
  437. [    4.528798] hid-generic 0003:1BCF:0005.0003: input,hidraw2: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:00:15.0-4.3/input0
  438. [   17.780988] NET: Registered protocol family 38
  439. [   18.070814] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
  440. [   18.221211] systemd[1]: Inserted module 'autofs4'
  441. [   18.240953] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
  442. [   18.259486] systemd[1]: Detected architecture x86-64.
  443. [   18.264351] systemd[1]: Set hostname to <debian-1>.
  444. [   18.413913] systemd[1]: Listening on udev Control Socket.
  445. [   18.414148] systemd[1]: Listening on Journal Socket (/dev/log).
  446. [   18.414337] systemd[1]: Listening on Journal Audit Socket.
  447. [   18.414433] systemd[1]: Listening on udev Kernel Socket.
  448. [   18.415941] systemd[1]: Created slice system-systemd\x2dfsck.slice.
  449. [   18.416272] systemd[1]: Created slice system-getty.slice.
  450. [   18.416490] systemd[1]: Listening on Journal Socket.
  451. [   18.464388] lp: driver loaded but no devices found
  452. [   18.468766] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
  453. [   18.478137] ppdev: user-space parallel port driver
  454. [   18.584144] systemd-journald[373]: Received request to flush runtime journal from PID 1
  455. [   18.698093] ite_cir: Auto-detected model: ITE8708 CIR transceiver
  456. [   18.698096] ite_cir: Using model: ITE8708 CIR transceiver
  457. [   18.698098] ite_cir: TX-capable: 1
  458. [   18.698099] ite_cir: Sample period (ns): 8680
  459. [   18.698099] ite_cir: TX carrier frequency (Hz): 38000
  460. [   18.698100] ite_cir: TX duty cycle (%): 33
  461. [   18.698101] ite_cir: RX low carrier frequency (Hz): 0
  462. [   18.698102] ite_cir: RX high carrier frequency (Hz): 0
  463. [   18.753695] sd 0:0:0:0: Attached scsi generic sg0 type 0
  464. [   18.759433] Registered IR keymap rc-rc6-mce
  465. [   18.769606] i801_smbus 0000:00:1f.1: can't derive routing for PCI INT A
  466. [   18.769609] i801_smbus 0000:00:1f.1: PCI INT A: not connected
  467. [   18.769633] i801_smbus 0000:00:1f.1: SPD Write Disable is set
  468. [   18.769653] i801_smbus 0000:00:1f.1: SMBus using polling
  469. [   18.805300] input: PC Speaker as /devices/platform/pcspkr/input/input13
  470. [   18.805732] IR RC6 protocol handler initialized
  471. [   18.823268] idma64 idma64.0: Found Intel integrated DMA 64-bit
  472. [   18.823914] idma64 idma64.1: Found Intel integrated DMA 64-bit
  473. [   18.824146] dw-apb-uart.1: ttyS0 at MMIO 0x91420000 (irq = 4, base_baud = 115200) is a 16550A
  474. [   18.824877] idma64 idma64.2: Found Intel integrated DMA 64-bit
  475. [   18.825580] idma64 idma64.3: Found Intel integrated DMA 64-bit
  476. [   18.825986] idma64 idma64.4: Found Intel integrated DMA 64-bit
  477. [   18.828624] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
  478. [   18.828627] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
  479. [   18.828628] RAPL PMU: hw unit of domain package 2^-14 Joules
  480. [   18.828628] RAPL PMU: hw unit of domain dram 2^-14 Joules
  481. [   18.828629] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
  482. [   18.833627] rc rc0: ITE8708 CIR transceiver as /devices/virtual/rc/rc0
  483. [   18.833689] input: ITE8708 CIR transceiver as /devices/virtual/rc/rc0/input12
  484. [   18.834896] rc rc0: lirc_dev: driver ite-cir registered at minor = 0, raw IR receiver, raw IR transmitter
  485. [   18.835025] ite_cir: driver has been successfully loaded
  486. [   18.838480] libphy: r8169: probed
  487. [   18.838880] r8169 0000:03:00.0 eth0: RTL8168h/8111h, 94:c6:91:a9:49:29, XID 54100800, IRQ 130
  488. [   18.838883] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
  489. [   18.868715] snd_hda_intel 0000:00:0e.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
  490. [   18.914110] Intel(R) Wireless WiFi driver for Linux
  491. [   18.914112] Copyright(c) 2003- 2015 Intel Corporation
  492. [   18.928181] iwlwifi 0000:02:00.0: firmware: direct-loading firmware iwlwifi-3168-29.ucode
  493. [   18.928774] iwlwifi 0000:02:00.0: loaded firmware version 29.1044073957.0 op_mode iwlmvm
  494. [   18.989208] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC283: line_outs=2 (0x1b/0x21/0x0/0x0/0x0) type:hp
  495. [   18.989213] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
  496. [   18.989214] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
  497. [   18.989216] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
  498. [   18.989217] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x1e/0x0
  499. [   18.989218] snd_hda_codec_realtek hdaudioC0D0:    inputs:
  500. [   18.989221] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x19
  501. [   19.121053] EDAC pnd2: b_cr_tolud_pci=080000001 ret=0
  502. [   19.121096] EDAC pnd2: b_cr_touud_lo_pci=080000000 ret=0
  503. [   19.121137] EDAC pnd2: b_cr_touud_hi_pci=000000002 ret=0
  504. [   19.121179] EDAC pnd2: b_cr_asym_mem_region0_mchbar=000000000 ret=0
  505. [   19.121219] EDAC pnd2: b_cr_asym_mem_region1_mchbar=081380000 ret=0
  506. [   19.121261] EDAC pnd2: b_cr_mot_out_base_mchbar=000000000 ret=0
  507. [   19.121301] EDAC pnd2: b_cr_mot_out_mask_mchbar=000000000 ret=0
  508. [   19.121382] EDAC pnd2: b_cr_slice_channel_hash=8000001080000010 ret=0
  509. [   19.121423] EDAC pnd2: b_cr_asym_2way_mem_region_mchbar=000000000 ret=0
  510. [   19.121463] EDAC pnd2: d_cr_drp0=000000000 ret=2
  511. [   19.121504] EDAC pnd2: d_cr_drp0=000000000 ret=2
  512. [   19.121560] EDAC pnd2: d_cr_drp0=0c000c007 ret=0
  513. [   19.121603] EDAC pnd2: d_cr_drp0=000000000 ret=2
  514. [   19.121605] EDAC pnd2: ECC disabled on channel 2
  515. [   19.121606] EDAC pnd2: Failed to register device with error -22.
  516. [   19.126426] usb-storage 1-4.1:1.0: USB Mass Storage device detected
  517. [   19.142309] r8169 0000:03:00.0 enp3s0: renamed from eth0
  518. [   19.163130] EDAC pnd2: b_cr_tolud_pci=080000001 ret=0
  519. [   19.163173] EDAC pnd2: b_cr_touud_lo_pci=080000000 ret=0
  520. [   19.163175] scsi host2: usb-storage 1-4.1:1.0
  521. [   19.163215] EDAC pnd2: b_cr_touud_hi_pci=000000002 ret=0
  522. [   19.163259] EDAC pnd2: b_cr_asym_mem_region0_mchbar=000000000 ret=0
  523. [   19.163300] EDAC pnd2: b_cr_asym_mem_region1_mchbar=081380000 ret=0
  524. [   19.163341] usbcore: registered new interface driver usb-storage
  525. [   19.163345] EDAC pnd2: b_cr_mot_out_base_mchbar=000000000 ret=0
  526. [   19.163400] EDAC pnd2: b_cr_mot_out_mask_mchbar=000000000 ret=0
  527. [   19.163506] EDAC pnd2: b_cr_slice_channel_hash=8000001080000010 ret=0
  528. [   19.163548] EDAC pnd2: b_cr_asym_2way_mem_region_mchbar=000000000 ret=0
  529. [   19.163589] EDAC pnd2: d_cr_drp0=000000000 ret=2
  530. [   19.163630] EDAC pnd2: d_cr_drp0=000000000 ret=2
  531. [   19.163672] EDAC pnd2: d_cr_drp0=0c000c007 ret=0
  532. [   19.163712] EDAC pnd2: d_cr_drp0=000000000 ret=2
  533. [   19.163714] EDAC pnd2: ECC disabled on channel 2
  534. [   19.163715] EDAC pnd2: Failed to register device with error -22.
  535. [   19.230082] EDAC pnd2: b_cr_tolud_pci=080000001 ret=0
  536. [   19.230126] EDAC pnd2: b_cr_touud_lo_pci=080000000 ret=0
  537. [   19.230176] EDAC pnd2: b_cr_touud_hi_pci=000000002 ret=0
  538. [   19.230218] EDAC pnd2: b_cr_asym_mem_region0_mchbar=000000000 ret=0
  539. [   19.230259] EDAC pnd2: b_cr_asym_mem_region1_mchbar=081380000 ret=0
  540. [   19.230299] EDAC pnd2: b_cr_mot_out_base_mchbar=000000000 ret=0
  541. [   19.230340] EDAC pnd2: b_cr_mot_out_mask_mchbar=000000000 ret=0
  542. [   19.230421] EDAC pnd2: b_cr_slice_channel_hash=8000001080000010 ret=0
  543. [   19.230463] EDAC pnd2: b_cr_asym_2way_mem_region_mchbar=000000000 ret=0
  544. [   19.230503] EDAC pnd2: d_cr_drp0=000000000 ret=2
  545. [   19.230543] EDAC pnd2: d_cr_drp0=000000000 ret=2
  546. [   19.230585] EDAC pnd2: d_cr_drp0=0c000c007 ret=0
  547. [   19.230626] EDAC pnd2: d_cr_drp0=000000000 ret=2
  548. [   19.230627] EDAC pnd2: ECC disabled on channel 2
  549. [   19.230628] EDAC pnd2: Failed to register device with error -22.
  550. [   19.236111] intel_rapl: Found RAPL domain package
  551. [   19.236116] intel_rapl: Found RAPL domain core
  552. [   19.236118] intel_rapl: Found RAPL domain uncore
  553. [   19.236120] intel_rapl: Found RAPL domain dram
  554. [   19.236372] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 3168, REV=0x220
  555. [   19.246842] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
  556. [   19.254510] iwlwifi 0000:02:00.0: base HW address: 18:56:80:a8:ba:33
  557. [   19.263946] EDAC pnd2: b_cr_tolud_pci=080000001 ret=0
  558. [   19.263990] EDAC pnd2: b_cr_touud_lo_pci=080000000 ret=0
  559. [   19.264033] EDAC pnd2: b_cr_touud_hi_pci=000000002 ret=0
  560. [   19.264074] EDAC pnd2: b_cr_asym_mem_region0_mchbar=000000000 ret=0
  561. [   19.264116] EDAC pnd2: b_cr_asym_mem_region1_mchbar=081380000 ret=0
  562. [   19.264157] EDAC pnd2: b_cr_mot_out_base_mchbar=000000000 ret=0
  563. [   19.264198] EDAC pnd2: b_cr_mot_out_mask_mchbar=000000000 ret=0
  564. [   19.264279] EDAC pnd2: b_cr_slice_channel_hash=8000001080000010 ret=0
  565. [   19.264320] EDAC pnd2: b_cr_asym_2way_mem_region_mchbar=000000000 ret=0
  566. [   19.264361] EDAC pnd2: d_cr_drp0=000000000 ret=2
  567. [   19.264402] EDAC pnd2: d_cr_drp0=000000000 ret=2
  568. [   19.264443] EDAC pnd2: d_cr_drp0=0c000c007 ret=0
  569. [   19.264483] EDAC pnd2: d_cr_drp0=000000000 ret=2
  570. [   19.264484] EDAC pnd2: ECC disabled on channel 2
  571. [   19.264485] EDAC pnd2: Failed to register device with error -22.
  572. [   19.291241] EXT4-fs (sda5): mounting ext2 file system using the ext4 subsystem
  573. [   19.299555] EXT4-fs (sda5): mounted filesystem without journal. Opts: (null)
  574. [   19.382392] Bluetooth: Core ver 2.22
  575. [   19.382419] NET: Registered protocol family 31
  576. [   19.382421] Bluetooth: HCI device and connection manager initialized
  577. [   19.382427] Bluetooth: HCI socket layer initialized
  578. [   19.382430] Bluetooth: L2CAP socket layer initialized
  579. [   19.382437] Bluetooth: SCO socket layer initialized
  580. [   19.386431] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
  581. [   19.386792] thermal thermal_zone2: failed to read out thermal zone (-61)
  582. [   19.389605] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:0e.0/sound/card0/input14
  583. [   19.390973] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0
  584. [   19.398095] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:0e.0/sound/card0/input15
  585. [   19.398195] input: HDA Intel PCH Headphone Front as /devices/pci0000:00/0000:00:0e.0/sound/card0/input16
  586. [   19.398274] input: HDA Intel PCH Front Headphone Surround as /devices/pci0000:00/0000:00:0e.0/sound/card0/input17
  587. [   19.398352] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input18
  588. [   19.398432] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input19
  589. [   19.398512] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input20
  590. [   19.398594] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input21
  591. [   19.398676] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input22
  592. [   19.413975] usbcore: registered new interface driver btusb
  593. [   19.424509] Bluetooth: hci0: read Intel version: 370810225019140f1d
  594. [   19.424512] Bluetooth: hci0: Intel device is already patched. patch num: 1d
  595. [   19.473380] audit: type=1400 audit(1582930735.259:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=634 comm="apparmor_parser"
  596. [   19.474014] audit: type=1400 audit(1582930735.259:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=632 comm="apparmor_parser"
  597. [   19.493852] audit: type=1400 audit(1582930735.279:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=637 comm="apparmor_parser"
  598. [   19.493858] audit: type=1400 audit(1582930735.279:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=637 comm="apparmor_parser"
  599. [   19.498220] audit: type=1400 audit(1582930735.283:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=638 comm="apparmor_parser"
  600. [   19.531208] audit: type=1400 audit(1582930735.315:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-soffice" pid=639 comm="apparmor_parser"
  601. [   19.531215] audit: type=1400 audit(1582930735.315:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-soffice//gpg" pid=639 comm="apparmor_parser"
  602. [   19.535130] audit: type=1400 audit(1582930735.319:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=633 comm="apparmor_parser"
  603. [   19.535136] audit: type=1400 audit(1582930735.319:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=633 comm="apparmor_parser"
  604. [   19.535139] audit: type=1400 audit(1582930735.319:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=633 comm="apparmor_parser"
  605. [   19.725867] r8169 0000:03:00.0: firmware: direct-loading firmware rtl_nic/rtl8168h-2.fw
  606. [   19.726382] Generic PHY r8169-300:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=r8169-300:00, irq=IGNORE)
  607. [   19.866090] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
  608. [   20.164128] scsi 2:0:0:0: CD-ROM            TSSTcorp CDDVDW SE-S224Q  TS02 PQ: 0 ANSI: 0
  609. [   20.166713] scsi 2:0:0:0: Attached scsi generic sg1 type 5
  610. [   20.183528] sr 2:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
  611. [   20.183533] cdrom: Uniform CD-ROM driver Revision: 3.20
  612. [   20.184168] sr 2:0:0:0: Attached scsi CD-ROM sr0
  613. [   20.255665] NET: Registered protocol family 3
  614. [   20.271568] NET: Registered protocol family 5
  615. [   20.285372] vboxdrv: loading out-of-tree module taints kernel.
  616. [   20.285825] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
  617. [   20.300861] vboxdrv: Found 4 processor cores
  618. [   20.326189] vboxdrv: TSC mode is Invariant, tentative frequency 1497600184 Hz
  619. [   20.326192] vboxdrv: Successfully loaded version 6.0.8 (interface 0x00290008)
  620. [   20.395189] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
  621. [   20.540730] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
  622. [   20.561863] VBoxNetFlt: Successfully started.
  623. [   20.577302] VBoxNetAdp: Successfully started.
  624. [   20.584323] VBoxPciLinuxInit
  625. [   20.589716] vboxpci: IOMMU not found (not registered)
  626. [   21.714908] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
  627. [   21.822109] fuse init (API version 7.27)
  628. [   22.429612] r8169 0000:03:00.0 enp3s0: Link is Up - 100Mbps/Full - flow control rx/tx
  629. [   22.429627] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
  630. root@debian:~#
  631.  

Quellcode

Hier kannst du den Code kopieren und ihn in deinen bevorzugten Editor einfügen. Alternativ kannst du den gesamten Eintrag auch als Datei herunterladen.