Pastebin

Nach Tausch der Netzwerkkarte kein WLN mehr

von vdvogt

Dein Code:
  1. dmesg
  2.  
  3. [    0.000000] Linux version 4.19.0-9-amd64 (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP Debian 4.19.118-2 (2020-04-29)
  4. [    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-9-amd64 root=UUID=0c462901-5854-4457-883d-e030a0ccc8e4 ro quiet
  5. [    0.000000] x86/fpu: x87 FPU will use FXSAVE
  6. [    0.000000] BIOS-provided physical RAM map:
  7. [    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
  8. [    0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
  9. [    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
  10. [    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000be47efff] usable
  11. [    0.000000] BIOS-e820: [mem 0x00000000be47f000-0x00000000bea3cfff] reserved
  12. [    0.000000] BIOS-e820: [mem 0x00000000bea3d000-0x00000000bee36fff] ACPI NVS
  13. [    0.000000] BIOS-e820: [mem 0x00000000bee37000-0x00000000bf156fff] reserved
  14. [    0.000000] BIOS-e820: [mem 0x00000000bf157000-0x00000000bf157fff] usable
  15. [    0.000000] BIOS-e820: [mem 0x00000000bf158000-0x00000000bf35dfff] ACPI NVS
  16. [    0.000000] BIOS-e820: [mem 0x00000000bf35e000-0x00000000bf7fffff] usable
  17. [    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
  18. [    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
  19. [    0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
  20. [    0.000000] BIOS-e820: [mem 0x00000000fec20000-0x00000000fec20fff] reserved
  21. [    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
  22. [    0.000000] BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved
  23. [    0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
  24. [    0.000000] BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved
  25. [    0.000000] BIOS-e820: [mem 0x0000000100001000-0x000000043fffffff] usable
  26. [    0.000000] NX (Execute Disable) protection: active
  27. [    0.000000] SMBIOS 2.7 present.
  28. [    0.000000] DMI: Gigabyte Technology Co., Ltd. To be filled by O.E.M./990FXA-UD5, BIOS FB 01/23/2013
  29. [    0.000000] tsc: Fast TSC calibration using PIT
  30. [    0.000000] tsc: Detected 3314.932 MHz processor
  31. [    0.002479] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
  32. [    0.002480] e820: remove [mem 0x000a0000-0x000fffff] usable
  33. [    0.008302] AGP: No AGP bridge found
  34. [    0.008356] last_pfn = 0x440000 max_arch_pfn = 0x400000000
  35. [    0.008358] MTRR default type: uncachable
  36. [    0.008359] MTRR fixed ranges enabled:
  37. [    0.008360]   00000-9FFFF write-back
  38. [    0.008361]   A0000-BFFFF write-through
  39. [    0.008362]   C0000-CEFFF write-protect
  40. [    0.008362]   CF000-EBFFF uncachable
  41. [    0.008363]   EC000-FFFFF write-protect
  42. [    0.008364] MTRR variable ranges enabled:
  43. [    0.008365]   0 base 000000000000 mask FFFF80000000 write-back
  44. [    0.008366]   1 base 000080000000 mask FFFFC0000000 write-back
  45. [    0.008367]   2 base 0000BF800000 mask FFFFFF800000 uncachable
  46. [    0.008367]   3 disabled
  47. [    0.008368]   4 disabled
  48. [    0.008368]   5 disabled
  49. [    0.008369]   6 disabled
  50. [    0.008369]   7 disabled
  51. [    0.008370] TOM2: 0000000440000000 aka 17408M
  52. [    0.009480] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
  53. [    0.009529] e820: update [mem 0xbf800000-0xffffffff] usable ==> reserved
  54. [    0.009535] last_pfn = 0xbf800 max_arch_pfn = 0x400000000
  55. [    0.012566] found SMP MP-table at [mem 0x000fd8c0-0x000fd8cf]
  56. [    0.044232] Using GB pages for direct mapping
  57. [    0.044234] BRK [0x2ae801000, 0x2ae801fff] PGTABLE
  58. [    0.044236] BRK [0x2ae802000, 0x2ae802fff] PGTABLE
  59. [    0.044237] BRK [0x2ae803000, 0x2ae803fff] PGTABLE
  60. [    0.044265] BRK [0x2ae804000, 0x2ae804fff] PGTABLE
  61. [    0.044360] BRK [0x2ae805000, 0x2ae805fff] PGTABLE
  62. [    0.044385] BRK [0x2ae806000, 0x2ae806fff] PGTABLE
  63. [    0.044428] BRK [0x2ae807000, 0x2ae807fff] PGTABLE
  64. [    0.044456] BRK [0x2ae808000, 0x2ae808fff] PGTABLE
  65. [    0.044574] RAMDISK: [mem 0x33539000-0x35a93fff]
  66. [    0.044581] ACPI: Early table checksum verification disabled
  67. [    0.057586] ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
  68. [    0.057588] ACPI: XSDT 0x00000000BEE1A070 000064 (v01 ALASKA A M I    01072009 AMI  00010013)
  69. [    0.057592] ACPI: FACP 0x00000000BEE20880 0000F4 (v04 ALASKA A M I    01072009 AMI  00010013)
  70. [    0.057596] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20180810/tbfadt-624)
  71. [    0.057599] ACPI: DSDT 0x00000000BEE1A170 00670F (v02 ALASKA A M I    00000000 INTL 20051117)
  72. [    0.057601] ACPI: FACS 0x00000000BEE31F80 000040
  73. [    0.057603] ACPI: APIC 0x00000000BEE20978 00008E (v03 ALASKA A M I    01072009 AMI  00010013)
  74. [    0.057605] ACPI: FPDT 0x00000000BEE20A08 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
  75. [    0.057606] ACPI: MCFG 0x00000000BEE20A50 00003C (v01 ALASKA A M I    01072009 MSFT 00010013)
  76. [    0.057608] ACPI: HPET 0x00000000BEE20A90 000038 (v01 ALASKA A M I    01072009 AMI  00000005)
  77. [    0.057610] ACPI: SSDT 0x00000000BEE20AC8 000E10 (v01 AMD    POWERNOW 00000001 AMD  00000001)
  78. [    0.057612] ACPI: MATS 0x00000000BEE218D8 000034 (v02 ALASKA A M I    00000002 w?x2 00000000)
  79. [    0.057614] ACPI: IVRS 0x00000000BEE21910 0000E0 (v01 AMD    RD890S   00202031 AMD  00000000)
  80. [    0.057623] ACPI: Local APIC address 0xfee00000
  81. [    0.057700] Scanning NUMA topology in Northbridge 24
  82. [    0.057727] No NUMA configuration found
  83. [    0.057728] Faking a node at [mem 0x0000000000000000-0x000000043fffffff]
  84. [    0.057731] NODE_DATA(0) allocated [mem 0x43fff9000-0x43fffdfff]
  85. [    0.057767] Zone ranges:
  86. [    0.057768]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
  87. [    0.057768]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
  88. [    0.057769]   Normal   [mem 0x0000000100000000-0x000000043fffffff]
  89. [    0.057770]   Device   empty
  90. [    0.057771] Movable zone start for each node
  91. [    0.057771] Early memory node ranges
  92. [    0.057772]   node   0: [mem 0x0000000000001000-0x000000000009dfff]
  93. [    0.057773]   node   0: [mem 0x0000000000100000-0x00000000be47efff]
  94. [    0.057773]   node   0: [mem 0x00000000bf157000-0x00000000bf157fff]
  95. [    0.057774]   node   0: [mem 0x00000000bf35e000-0x00000000bf7fffff]
  96. [    0.057774]   node   0: [mem 0x0000000100001000-0x000000043fffffff]
  97. [    0.057853] Zeroed struct page in unavailable ranges: 5954 pages
  98. [    0.057854] Initmem setup node 0 [mem 0x0000000000001000-0x000000043fffffff]
  99. [    0.057855] On node 0 totalpages: 4188350
  100. [    0.057856]   DMA zone: 64 pages used for memmap
  101. [    0.057856]   DMA zone: 21 pages reserved
  102. [    0.057857]   DMA zone: 3997 pages, LIFO batch:0
  103. [    0.057937]   DMA32 zone: 12133 pages used for memmap
  104. [    0.057937]   DMA32 zone: 776482 pages, LIFO batch:63
  105. [    0.074715]   Normal zone: 53248 pages used for memmap
  106. [    0.074716]   Normal zone: 3407871 pages, LIFO batch:63
  107. [    0.145172] ACPI: PM-Timer IO Port: 0x808
  108. [    0.145173] ACPI: Local APIC address 0xfee00000
  109. [    0.145178] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
  110. [    0.145185] IOAPIC[0]: apic_id 7, version 33, address 0xfec00000, GSI 0-23
  111. [    0.145187] IOAPIC[1]: apic_id 8, version 33, address 0xfec20000, GSI 24-55
  112. [    0.145189] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
  113. [    0.145190] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
  114. [    0.145191] ACPI: IRQ0 used by override.
  115. [    0.145192] ACPI: IRQ9 used by override.
  116. [    0.145193] Using ACPI (MADT) for SMP configuration information
  117. [    0.145195] ACPI: HPET id: 0x43538210 base: 0xfed00000
  118. [    0.145198] smpboot: Allowing 6 CPUs, 0 hotplug CPUs
  119. [    0.145216] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
  120. [    0.145217] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
  121. [    0.145218] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
  122. [    0.145218] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
  123. [    0.145219] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
  124. [    0.145220] PM: Registered nosave memory: [mem 0xbe47f000-0xbea3cfff]
  125. [    0.145221] PM: Registered nosave memory: [mem 0xbea3d000-0xbee36fff]
  126. [    0.145221] PM: Registered nosave memory: [mem 0xbee37000-0xbf156fff]
  127. [    0.145222] PM: Registered nosave memory: [mem 0xbf158000-0xbf35dfff]
  128. [    0.145223] PM: Registered nosave memory: [mem 0xbf800000-0xf7ffffff]
  129. [    0.145224] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
  130. [    0.145224] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
  131. [    0.145225] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
  132. [    0.145225] PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
  133. [    0.145226] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
  134. [    0.145226] PM: Registered nosave memory: [mem 0xfec11000-0xfec1ffff]
  135. [    0.145226] PM: Registered nosave memory: [mem 0xfec20000-0xfec20fff]
  136. [    0.145227] PM: Registered nosave memory: [mem 0xfec21000-0xfecfffff]
  137. [    0.145227] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
  138. [    0.145228] PM: Registered nosave memory: [mem 0xfed01000-0xfed60fff]
  139. [    0.145228] PM: Registered nosave memory: [mem 0xfed61000-0xfed70fff]
  140. [    0.145229] PM: Registered nosave memory: [mem 0xfed71000-0xfed7ffff]
  141. [    0.145229] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
  142. [    0.145230] PM: Registered nosave memory: [mem 0xfed90000-0xfeefffff]
  143. [    0.145230] PM: Registered nosave memory: [mem 0xfef00000-0xffffffff]
  144. [    0.145230] PM: Registered nosave memory: [mem 0x100000000-0x100000fff]
  145. [    0.145232] [mem 0xbf800000-0xf7ffffff] available for PCI devices
  146. [    0.145233] Booting paravirtualized kernel on bare hardware
  147. [    0.145236] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
  148. [    0.241339] random: get_random_bytes called from start_kernel+0x93/0x52c with crng_init=0
  149. [    0.241346] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:6 nr_node_ids:1
  150. [    0.241917] percpu: Embedded 45 pages/cpu s144408 r8192 d31720 u262144
  151. [    0.241923] pcpu-alloc: s144408 r8192 d31720 u262144 alloc=1*2097152
  152. [    0.241923] pcpu-alloc: [0] 0 1 2 3 4 5 - -
  153. [    0.241942] Built 1 zonelists, mobility grouping on.  Total pages: 4122884
  154. [    0.241943] Policy zone: Normal
  155. [    0.241945] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-9-amd64 root=UUID=0c462901-5854-4457-883d-e030a0ccc8e4 ro quiet
  156. [    0.256087] AGP: Checking aperture...
  157. [    0.261904] AGP: No AGP bridge found
  158. [    0.261906] AGP: Node 0: aperture [bus addr 0xf8000000-0xfbffffff] (64MB)
  159. [    0.327647] Memory: 16361084K/16753400K available (10252K kernel code, 1241K rwdata, 3316K rodata, 1588K init, 2276K bss, 392316K reserved, 0K cma-reserved)
  160. [    0.327761] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
  161. [    0.327768] ftrace: allocating 31879 entries in 125 pages
  162. [    0.337628] rcu: Hierarchical RCU implementation.
  163. [    0.337629] rcu:     RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=6.
  164. [    0.337630] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
  165. [    0.340278] NR_IRQS: 33024, nr_irqs: 1016, preallocated irqs: 16
  166. [    0.340555] spurious 8259A interrupt: IRQ7.
  167. [    0.344933] Console: colour VGA+ 80x25
  168. [    0.344937] console [tty0] enabled
  169. [    0.344956] ACPI: Core revision 20180810
  170. [    0.345092] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
  171. [    0.345102] hpet clockevent registered
  172. [    0.345105] APIC: Switch to symmetric I/O mode setup
  173. [    0.394073] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
  174. [    0.413109] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2fc86622cf0, max_idle_ns: 440795279708 ns
  175. [    0.413118] Calibrating delay loop (skipped), value calculated using timer frequency.. 6629.86 BogoMIPS (lpj=13259728)
  176. [    0.413120] pid_max: default: 32768 minimum: 301
  177. [    0.413151] Security Framework initialized
  178. [    0.413152] Yama: disabled by default; enable with sysctl kernel.yama.*
  179. [    0.413168] AppArmor: AppArmor initialized
  180. [    0.417188] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
  181. [    0.419207] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
  182. [    0.419290] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
  183. [    0.419354] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
  184. [    0.419574] LVT offset 0 assigned for vector 0xf9
  185. [    0.419576] process: using AMD E400 aware idle routine
  186. [    0.419578] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
  187. [    0.419579] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
  188. [    0.419580] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
  189. [    0.419582] Spectre V2 : Mitigation: Full AMD retpoline
  190. [    0.419582] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
  191. [    0.423501] Freeing SMP alternatives memory: 24K
  192. [    0.425115] process: System has AMD C1E enabled
  193. [    0.536661] process: Switch to broadcast mode on CPU0
  194. [    0.536666] smpboot: CPU0: AMD Phenom(tm) II X6 1100T Processor (family: 0x10, model: 0xa, stepping: 0x0)
  195. [    0.536775] Performance Events: AMD PMU driver.
  196. [    0.536778] ... version:                0
  197. [    0.536778] ... bit width:              48
  198. [    0.536779] ... generic registers:      4
  199. [    0.536779] ... value mask:             0000ffffffffffff
  200. [    0.536780] ... max period:             00007fffffffffff
  201. [    0.536780] ... fixed-purpose events:   0
  202. [    0.536780] ... event mask:             000000000000000f
  203. [    0.536819] rcu: Hierarchical SRCU implementation.
  204. [    0.537111] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
  205. [    0.537111] smp: Bringing up secondary CPUs ...
  206. [    0.537111] x86: Booting SMP configuration:
  207. [    0.537111] .... node  #0, CPUs:      #1
  208. [    0.052575] process: Switch to broadcast mode on CPU1
  209. [    0.537111]  #2
  210. [    0.052575] process: Switch to broadcast mode on CPU2
  211. [    0.537184]  #3
  212. [    0.052575] process: Switch to broadcast mode on CPU3
  213. [    0.541196]  #4
  214. [    0.052575] process: Switch to broadcast mode on CPU4
  215. [    0.545200]  #5
  216. [    0.052575] process: Switch to broadcast mode on CPU5
  217. [    0.547750] smp: Brought up 1 node, 6 CPUs
  218. [    0.547750] smpboot: Max logical packages: 1
  219. [    0.547750] smpboot: Total of 6 processors activated (39779.18 BogoMIPS)
  220. [    0.549914] devtmpfs: initialized
  221. [    0.549914] x86/mm: Memory block size: 128MB
  222. [    0.550639] PM: Registering ACPI NVS region [mem 0xbea3d000-0xbee36fff] (4169728 bytes)
  223. [    0.550639] PM: Registering ACPI NVS region [mem 0xbf158000-0xbf35dfff] (2121728 bytes)
  224. [    0.553207] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  225. [    0.553220] futex hash table entries: 2048 (order: 5, 131072 bytes)
  226. [    0.553321] pinctrl core: initialized pinctrl subsystem
  227. [    0.554211] NET: Registered protocol family 16
  228. [    0.554286] audit: initializing netlink subsys (disabled)
  229. [    0.554292] audit: type=2000 audit(1589736420.164:1): state=initialized audit_enabled=0 res=1
  230. [    0.554292] cpuidle: using governor ladder
  231. [    0.554292] cpuidle: using governor menu
  232. [    0.554292] node 0 link 0: io port [a000, ffff]
  233. [    0.554292] TOM: 00000000c0000000 aka 3072M
  234. [    0.554292] Fam 10h mmconf [mem 0xe0000000-0xefffffff]
  235. [    0.554292] node 0 link 0: mmio [c0000000, fef0ffff] ==> [c0000000, dfffffff] and [f0000000, fef0ffff]
  236. [    0.554292] TOM2: 0000000440000000 aka 17408M
  237. [    0.554292] bus: [bus 00-1f] on node 0 link 0
  238. [    0.554292] bus: 00 [io  0x0000-0xffff]
  239. [    0.554292] bus: 00 [mem 0xc0000000-0xdfffffff]
  240. [    0.554292] bus: 00 [mem 0xf0000000-0xffffffff]
  241. [    0.554292] bus: 00 [mem 0x440000000-0xfcffffffff]
  242. [    0.554292] ACPI: bus type PCI registered
  243. [    0.554292] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
  244. [    0.554292] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
  245. [    0.554292] PCI: not using MMCONFIG
  246. [    0.554292] PCI: Using configuration type 1 for base access
  247. [    0.554292] PCI: Using configuration type 1 for extended access
  248. [    0.554292] mtrr: your CPUs had inconsistent variable MTRR settings
  249. [    0.554292] mtrr: probably your BIOS does not setup all CPUs.
  250. [    0.554292] mtrr: corrected configuration.
  251. [    0.554292] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
  252. [    0.554292] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
  253. [    0.554292] ACPI: Added _OSI(Module Device)
  254. [    0.554292] ACPI: Added _OSI(Processor Device)
  255. [    0.554292] ACPI: Added _OSI(3.0 _SCP Extensions)
  256. [    0.554292] ACPI: Added _OSI(Processor Aggregator Device)
  257. [    0.554292] ACPI: Added _OSI(Linux-Dell-Video)
  258. [    0.554292] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
  259. [    0.558572] ACPI: 2 ACPI AML tables successfully acquired and loaded
  260. [    0.559474] ACPI: Interpreter enabled
  261. [    0.559490] ACPI: (supports S0 S3 S4 S5)
  262. [    0.559490] ACPI: Using IOAPIC for interrupt routing
  263. [    0.559587] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
  264. [    0.559612] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
  265. [    0.559625] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
  266. [    0.559788] ACPI: Enabled 10 GPEs in block 00 to 1F
  267. [    0.563936] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
  268. [    0.563940] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
  269. [    0.563943] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
  270. [    0.564162] PCI host bridge to bus 0000:00
  271. [    0.564163] pci_bus 0000:00: root bus resource [io  0x0000-0x03af window]
  272. [    0.564164] pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7 window]
  273. [    0.564165] pci_bus 0000:00: root bus resource [io  0x03b0-0x03df window]
  274. [    0.564166] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
  275. [    0.564167] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
  276. [    0.564168] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
  277. [    0.564169] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff window]
  278. [    0.564170] pci_bus 0000:00: root bus resource [bus 00-ff]
  279. [    0.564177] pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000
  280. [    0.564267] pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600
  281. [    0.564352] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400
  282. [    0.564365] pci 0000:00:09.0: enabling Extended Tags
  283. [    0.564383] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
  284. [    0.564446] pci 0000:00:0a.0: [1002:5a1d] type 01 class 0x060400
  285. [    0.564460] pci 0000:00:0a.0: enabling Extended Tags
  286. [    0.564476] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
  287. [    0.564539] pci 0000:00:0b.0: [1002:5a1f] type 01 class 0x060400
  288. [    0.564552] pci 0000:00:0b.0: enabling Extended Tags
  289. [    0.564569] pci 0000:00:0b.0: PME# supported from D0 D3hot D3cold
  290. [    0.564638] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
  291. [    0.564652] pci 0000:00:11.0: reg 0x10: [io  0xf040-0xf047]
  292. [    0.564659] pci 0000:00:11.0: reg 0x14: [io  0xf030-0xf033]
  293. [    0.564665] pci 0000:00:11.0: reg 0x18: [io  0xf020-0xf027]
  294. [    0.564671] pci 0000:00:11.0: reg 0x1c: [io  0xf010-0xf013]
  295. [    0.564677] pci 0000:00:11.0: reg 0x20: [io  0xf000-0xf00f]
  296. [    0.564683] pci 0000:00:11.0: reg 0x24: [mem 0xfe70b000-0xfe70b3ff]
  297. [    0.564766] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
  298. [    0.564778] pci 0000:00:12.0: reg 0x10: [mem 0xfe70a000-0xfe70afff]
  299. [    0.564873] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
  300. [    0.564887] pci 0000:00:12.2: reg 0x10: [mem 0xfe709000-0xfe7090ff]
  301. [    0.564942] pci 0000:00:12.2: supports D1 D2
  302. [    0.564943] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
  303. [    0.565008] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
  304. [    0.565020] pci 0000:00:13.0: reg 0x10: [mem 0xfe708000-0xfe708fff]
  305. [    0.565157] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
  306. [    0.565172] pci 0000:00:13.2: reg 0x10: [mem 0xfe707000-0xfe7070ff]
  307. [    0.565227] pci 0000:00:13.2: supports D1 D2
  308. [    0.565227] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
  309. [    0.565296] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
  310. [    0.565410] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
  311. [    0.565427] pci 0000:00:14.2: reg 0x10: [mem 0xfe700000-0xfe703fff 64bit]
  312. [    0.565474] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
  313. [    0.565539] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
  314. [    0.565652] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
  315. [    0.565733] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
  316. [    0.565745] pci 0000:00:14.5: reg 0x10: [mem 0xfe706000-0xfe706fff]
  317. [    0.565840] pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
  318. [    0.565866] pci 0000:00:15.0: enabling Extended Tags
  319. [    0.565895] pci 0000:00:15.0: supports D1 D2
  320. [    0.565964] pci 0000:00:15.1: [1002:43a1] type 01 class 0x060400
  321. [    0.565990] pci 0000:00:15.1: enabling Extended Tags
  322. [    0.566019] pci 0000:00:15.1: supports D1 D2
  323. [    0.566087] pci 0000:00:15.2: [1002:43a2] type 01 class 0x060400
  324. [    0.566113] pci 0000:00:15.2: enabling Extended Tags
  325. [    0.566142] pci 0000:00:15.2: supports D1 D2
  326. [    0.566210] pci 0000:00:15.3: [1002:43a3] type 01 class 0x060400
  327. [    0.566236] pci 0000:00:15.3: enabling Extended Tags
  328. [    0.566265] pci 0000:00:15.3: supports D1 D2
  329. [    0.566333] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
  330. [    0.566345] pci 0000:00:16.0: reg 0x10: [mem 0xfe705000-0xfe705fff]
  331. [    0.566443] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
  332. [    0.566457] pci 0000:00:16.2: reg 0x10: [mem 0xfe704000-0xfe7040ff]
  333. [    0.566511] pci 0000:00:16.2: supports D1 D2
  334. [    0.566512] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
  335. [    0.566580] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
  336. [    0.566634] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
  337. [    0.566686] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
  338. [    0.566738] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
  339. [    0.566791] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
  340. [    0.566879] pci 0000:01:00.0: [1b6f:7023] type 00 class 0x0c0330
  341. [    0.566898] pci 0000:01:00.0: reg 0x10: [mem 0xfe600000-0xfe607fff 64bit]
  342. [    0.566931] pci 0000:01:00.0: enabling Extended Tags
  343. [    0.566967] pci 0000:01:00.0: supports D1 D2
  344. [    0.566968] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
  345. [    0.577166] pci 0000:00:09.0: PCI bridge to [bus 01]
  346. [    0.577177] pci 0000:00:09.0:   bridge window [mem 0xfe600000-0xfe6fffff]
  347. [    0.577301] pci 0000:02:00.0: [1b4b:9172] type 00 class 0x010601
  348. [    0.577325] pci 0000:02:00.0: reg 0x10: [io  0xe040-0xe047]
  349. [    0.577335] pci 0000:02:00.0: reg 0x14: [io  0xe030-0xe033]
  350. [    0.577345] pci 0000:02:00.0: reg 0x18: [io  0xe020-0xe027]
  351. [    0.577355] pci 0000:02:00.0: reg 0x1c: [io  0xe010-0xe013]
  352. [    0.577366] pci 0000:02:00.0: reg 0x20: [io  0xe000-0xe00f]
  353. [    0.577372] pci 0000:02:00.0: reg 0x24: [mem 0xfe510000-0xfe5101ff]
  354. [    0.577377] pci 0000:02:00.0: reg 0x30: [mem 0xfe500000-0xfe50ffff pref]
  355. [    0.577397] pci 0000:02:00.0: Enabling fixed DMA alias to 00.1
  356. [    0.577420] pci 0000:02:00.0: PME# supported from D3hot
  357. [    0.589156] pci 0000:00:0a.0: PCI bridge to [bus 02]
  358. [    0.589165] pci 0000:00:0a.0:   bridge window [io  0xe000-0xefff]
  359. [    0.589171] pci 0000:00:0a.0:   bridge window [mem 0xfe500000-0xfe5fffff]
  360. [    0.589291] pci 0000:03:00.0: [10de:17c8] type 00 class 0x030000
  361. [    0.589320] pci 0000:03:00.0: reg 0x10: [mem 0xfd000000-0xfdffffff]
  362. [    0.589335] pci 0000:03:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
  363. [    0.589350] pci 0000:03:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
  364. [    0.589361] pci 0000:03:00.0: reg 0x24: [io  0xd000-0xd07f]
  365. [    0.589372] pci 0000:03:00.0: reg 0x30: [mem 0xfe000000-0xfe07ffff pref]
  366. [    0.589382] pci 0000:03:00.0: enabling Extended Tags
  367. [    0.589475] pci 0000:03:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x16 link at 0000:00:0b.0 (capable of 126.016 Gb/s with 8 GT/s x16 link)
  368. [    0.589513] pci 0000:03:00.1: [10de:0fb0] type 00 class 0x040300
  369. [    0.589527] pci 0000:03:00.1: reg 0x10: [mem 0xfe080000-0xfe083fff]
  370. [    0.589561] pci 0000:03:00.1: enabling Extended Tags
  371. [    0.589644] pci 0000:00:0b.0: PCI bridge to [bus 03]
  372. [    0.589646] pci 0000:00:0b.0:   bridge window [io  0xd000-0xdfff]
  373. [    0.589647] pci 0000:00:0b.0:   bridge window [mem 0xfd000000-0xfe0fffff]
  374. [    0.589650] pci 0000:00:0b.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
  375. [    0.589657] pci_bus 0000:04: extended config space not accessible
  376. [    0.589692] pci 0000:04:0e.0: [1106:3044] type 00 class 0x0c0010
  377. [    0.589710] pci 0000:04:0e.0: reg 0x10: [mem 0xfe400000-0xfe4007ff]
  378. [    0.589728] pci 0000:04:0e.0: reg 0x14: [io  0xc000-0xc07f]
  379. [    0.589799] pci 0000:04:0e.0: supports D2
  380. [    0.589800] pci 0000:04:0e.0: PME# supported from D2 D3hot D3cold
  381. [    0.589851] pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode)
  382. [    0.589853] pci 0000:00:14.4:   bridge window [io  0xc000-0xcfff]
  383. [    0.589855] pci 0000:00:14.4:   bridge window [mem 0xfe400000-0xfe4fffff]
  384. [    0.589858] pci 0000:00:14.4:   bridge window [io  0x0000-0x03af window] (subtractive decode)
  385. [    0.589859] pci 0000:00:14.4:   bridge window [io  0x03e0-0x0cf7 window] (subtractive decode)
  386. [    0.589860] pci 0000:00:14.4:   bridge window [io  0x03b0-0x03df window] (subtractive decode)
  387. [    0.589860] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
  388. [    0.589861] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
  389. [    0.589862] pci 0000:00:14.4:   bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
  390. [    0.589863] pci 0000:00:14.4:   bridge window [mem 0xc0000000-0xffffffff window] (subtractive decode)
  391. [    0.589918] pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000
  392. [    0.589942] pci 0000:05:00.0: reg 0x10: [io  0xb000-0xb0ff]
  393. [    0.589965] pci 0000:05:00.0: reg 0x18: [mem 0xd2104000-0xd2104fff 64bit pref]
  394. [    0.589979] pci 0000:05:00.0: reg 0x20: [mem 0xd2100000-0xd2103fff 64bit pref]
  395. [    0.590059] pci 0000:05:00.0: supports D1 D2
  396. [    0.590060] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
  397. [    0.590160] pci 0000:00:15.0: PCI bridge to [bus 05]
  398. [    0.590163] pci 0000:00:15.0:   bridge window [io  0xb000-0xbfff]
  399. [    0.590168] pci 0000:00:15.0:   bridge window [mem 0xd2100000-0xd21fffff 64bit pref]
  400. [    0.590210] pci 0000:06:00.0: [1b6f:7023] type 00 class 0x0c0330
  401. [    0.590236] pci 0000:06:00.0: reg 0x10: [mem 0xfe300000-0xfe307fff 64bit]
  402. [    0.590284] pci 0000:06:00.0: enabling Extended Tags
  403. [    0.590334] pci 0000:06:00.0: supports D1 D2
  404. [    0.590335] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
  405. [    0.590408] pci 0000:00:15.1: PCI bridge to [bus 06]
  406. [    0.590413] pci 0000:00:15.1:   bridge window [mem 0xfe300000-0xfe3fffff]
  407. [    0.590454] pci 0000:07:00.0: [1b4b:9172] type 00 class 0x010601
  408. [    0.590471] pci 0000:07:00.0: reg 0x10: [io  0xa040-0xa047]
  409. [    0.590479] pci 0000:07:00.0: reg 0x14: [io  0xa030-0xa033]
  410. [    0.590486] pci 0000:07:00.0: reg 0x18: [io  0xa020-0xa027]
  411. [    0.590494] pci 0000:07:00.0: reg 0x1c: [io  0xa010-0xa013]
  412. [    0.590501] pci 0000:07:00.0: reg 0x20: [io  0xa000-0xa00f]
  413. [    0.590509] pci 0000:07:00.0: reg 0x24: [mem 0xfe210000-0xfe2101ff]
  414. [    0.590517] pci 0000:07:00.0: reg 0x30: [mem 0xfe200000-0xfe20ffff pref]
  415. [    0.590527] pci 0000:07:00.0: Enabling fixed DMA alias to 00.1
  416. [    0.590560] pci 0000:07:00.0: PME# supported from D3hot
  417. [    0.590625] pci 0000:00:15.2: PCI bridge to [bus 07]
  418. [    0.590628] pci 0000:00:15.2:   bridge window [io  0xa000-0xafff]
  419. [    0.590630] pci 0000:00:15.2:   bridge window [mem 0xfe200000-0xfe2fffff]
  420. [    0.590677] pci 0000:08:00.0: [8086:2723] type 00 class 0x028000
  421. [    0.590710] pci 0000:08:00.0: reg 0x10: [mem 0xfe100000-0xfe103fff 64bit]
  422. [    0.590832] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold
  423. 'x509' registered
  424. [    1.692375] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
  425. [    1.692454] io scheduler noop registered
  426. [    1.692455] io scheduler deadline registered
  427. [    1.692486] io scheduler cfq registered (default)
  428. [    1.692487] io scheduler mq-deadline registered
  429. [    1.693177] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
  430. [    1.693198] ACPI: ACPI: processor limited to max C-state 1
  431. [    1.693617] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  432. [    1.714033] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
  433. [    1.714386] Linux agpgart interface v0.103
  434. [    1.714411] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
  435. [    1.714412] AMD IOMMUv2 functionality not available on this system
  436. [    1.715277] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
  437. [    1.715278] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
  438. [    1.715419] serio: i8042 KBD port at 0x60,0x64 irq 1
  439. [    1.715509] mousedev: PS/2 mouse device common for all mice
  440. [    1.715546] rtc_cmos 00:05: RTC can wake from S4
  441. [    1.715660] rtc_cmos 00:05: registered as rtc0
  442. [    1.715671] rtc_cmos 00:05: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
  443. [    1.715832] ledtrig-cpu: registered to indicate activity on CPUs
  444. [    1.716224] NET: Registered protocol family 10
  445. [    1.722826] Segment Routing with IPv6
  446. [    1.722922] mip6: Mobile IPv6
  447. [    1.722927] NET: Registered protocol family 17
  448. [    1.723009] mpls_gso: MPLS GSO support
  449. [    1.723353] mce: Using 6 MCE banks
  450. [    1.723384] microcode: CPU0: patch_level=0x010000bf
  451. [    1.723390] microcode: CPU1: patch_level=0x010000bf
  452. [    1.723397] microcode: CPU2: patch_level=0x010000bf
  453. [    1.723400] microcode: CPU3: patch_level=0x010000bf
  454. [    1.723405] microcode: CPU4: patch_level=0x010000bf
  455. [    1.723411] microcode: CPU5: patch_level=0x010000bf
  456. [    1.723447] microcode: Microcode Update Driver: v2.2.
  457. [    1.723456] sched_clock: Marking stable (1674868062, 48575070)->(1736539777, -13096645)
  458. [    1.723628] registered taskstats version 1
  459. [    1.723629] Loading compiled-in X.509 certificates
  460. [    1.735932] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
  461. [    1.759679] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
  462. [    1.759694] Loaded X.509 cert 'Debian Secure Boot Signer: 00a7468def'
  463. [    1.759712] zswap: loaded using pool lzo/zbud
  464. [    1.759867] AppArmor: AppArmor sha1 policy hashing enabled
  465. [    1.760236] rtc_cmos 00:05: setting system clock to 2020-05-17 17:27:01 UTC (1589736421)
  466. [    2.017750] Freeing unused kernel image memory: 1588K
  467. [    2.033249] Write protecting the kernel read-only data: 16384k
  468. [    2.034925] Freeing unused kernel image memory: 2028K
  469. [    2.035238] Freeing unused kernel image memory: 780K
  470. [    2.042408] x86/mm: Checked W+X mappings: passed, no W+X pages found.
  471. [    2.042410] Run /init as init process
  472. [    2.089712] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
  473. [    2.089735] ACPI: Power Button [PWRB]
  474. [    2.089784] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
  475. [    2.089790] ACPI: Power Button [PWRF]
  476. [    2.101620] SCSI subsystem initialized
  477. [    2.103770] ACPI: bus type USB registered
  478. [    2.103787] usbcore: registered new interface driver usbfs
  479. [    2.103794] usbcore: registered new interface driver hub
  480. [    2.103828] usbcore: registered new device driver usb
  481. [    2.109745] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  482. [    2.110574] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
  483. [    2.110580] piix4_smbus 0000:00:14.0: Using register 0x2c for SMBus port selection
  484. [    2.110678] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
  485. [    2.111186] ehci-pci: EHCI PCI platform driver
  486. [    2.114244] QUIRK: Enable AMD PLL fix
  487. [    2.114272] ehci-pci 0000:00:12.2: EHCI Host Controller
  488. [    2.114278] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
  489. [    2.114282] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
  490. [    2.114289] ehci-pci 0000:00:12.2: debug port 1
  491. [    2.114339] ehci-pci 0000:00:12.2: irq 17, io mem 0xfe709000
  492. [    2.114546] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  493. [    2.127495] r8169 0000:05:00.0: can't disable ASPM; OS doesn't have ASPM control
  494. [    2.129582] libata version 3.00 loaded.
  495. [    2.133133] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
  496. [    2.133203] libphy: r8169: probed
  497. [    2.133642] r8169 0000:05:00.0 eth0: RTL8168evl/8111evl, fc:aa:14:2f:ba:58, XID 2c900800, IRQ 29
  498. [    2.133643] r8169 0000:05:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
  499. [    2.133678] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
  500. [    2.133680] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  501. [    2.133681] usb usb1: Product: EHCI Host Controller
  502. [    2.133681] usb usb1: Manufacturer: Linux 4.19.0-9-amd64 ehci_hcd
  503. [    2.133682] usb usb1: SerialNumber: 0000:00:12.2
  504. [    2.133794] hub 1-0:1.0: USB hub found
  505. [    2.133801] hub 1-0:1.0: 5 ports detected
  506. [    2.133940] xhci_hcd 0000:01:00.0: xHCI Host Controller
  507. [    2.133945] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
  508. [    2.134014] xhci_hcd 0000:01:00.0: hcc params 0x040050af hci version 0x100 quirks 0x0000000000080490
  509. [    2.134156] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
  510. [    2.134157] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  511. [    2.134158] usb usb2: Product: xHCI Host Controller
  512. [    2.134159] usb usb2: Manufacturer: Linux 4.19.0-9-amd64 xhci-hcd
  513. [    2.134159] usb usb2: SerialNumber: 0000:01:00.0
  514. [    2.134240] hub 2-0:1.0: USB hub found
  515. [    2.134248] hub 2-0:1.0: 2 ports detected
  516. [    2.134344] xhci_hcd 0000:01:00.0: xHCI Host Controller
  517. [    2.134346] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 3
  518. [    2.134349] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed
  519. [    2.134365] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
  520. [    2.134386] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
  521. [    2.134387] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  522. [    2.134388] usb usb3: Product: xHCI Host Controller
  523. [    2.134389] usb usb3: Manufacturer: Linux 4.19.0-9-amd64 xhci-hcd
  524. [    2.134390] usb usb3: SerialNumber: 0000:01:00.0
  525. [    2.134458] hub 3-0:1.0: USB hub found
  526. [    2.134465] hub 3-0:1.0: 2 ports detected
  527. [    2.134655] ehci-pci 0000:00:13.2: EHCI Host Controller
  528. [    2.134659] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 4
  529. [    2.134663] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
  530. [    2.134670] ehci-pci 0000:00:13.2: debug port 1
  531. [    2.134703] ehci-pci 0000:00:13.2: irq 17, io mem 0xfe707000
  532. [    2.134828] ahci 0000:00:11.0: version 3.0
  533. [    2.134967] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
  534. [    2.134969] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part sxs
  535. [    2.135746] scsi host0: ahci
  536. [    2.135917] scsi host1: ahci
  537. [    2.136045] scsi host2: ahci
  538. [    2.136178] scsi host3: ahci
  539. [    2.137257] scsi host4: ahci
  540. [    2.137399] r8169 0000:05:00.0 enp5s0: renamed from eth0
  541. [    2.137528] scsi host5: ahci
  542. [    2.137593] ata1: SATA max UDMA/133 abar m1024@0xfe70b000 port 0xfe70b100 irq 19
  543. [    2.137595] ata2: SATA max UDMA/133 abar m1024@0xfe70b000 port 0xfe70b180 irq 19
  544. [    2.137597] ata3: SATA max UDMA/133 abar m1024@0xfe70b000 port 0xfe70b200 irq 19
  545. [    2.137598] ata4: SATA max UDMA/133 abar m1024@0xfe70b000 port 0xfe70b280 irq 19
  546. [    2.137599] ata5: SATA max UDMA/133 abar m1024@0xfe70b000 port 0xfe70b300 irq 19
  547. [    2.137601] ata6: SATA max UDMA/133 abar m1024@0xfe70b000 port 0xfe70b380 irq 19
  548. [    2.137802] ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
  549. [    2.137804] ahci 0000:02:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
  550. [    2.138158] scsi host6: ahci
  551. [    2.138309] scsi host7: ahci
  552. [    2.138382] ata7: SATA max UDMA/133 abar m512@0xfe510000 port 0xfe510100 irq 32
  553. [    2.138384] ata8: SATA max UDMA/133 abar m512@0xfe510000 port 0xfe510180 irq 32
  554. [    2.138560] ahci 0000:07:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
  555. [    2.138562] ahci 0000:07:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
  556. [    2.138957] scsi host8: ahci
  557. [    2.139083] scsi host9: ahci
  558. [    2.139178] ata9: SATA max UDMA/133 abar m512@0xfe210000 port 0xfe210100 irq 33
  559. [    2.139180] ata10: SATA max UDMA/133 abar m512@0xfe210000 port 0xfe210180 irq 33
  560. [    2.153183] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
  561. [    2.153233] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
  562. [    2.153235] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  563. [    2.153236] usb usb4: Product: EHCI Host Controller
  564. [    2.153237] usb usb4: Manufacturer: Linux 4.19.0-9-amd64 ehci_hcd
  565. [    2.153237] usb usb4: SerialNumber: 0000:00:13.2
  566. [    2.153396] hub 4-0:1.0: USB hub found
  567. [    2.153401] hub 4-0:1.0: 5 ports detected
  568. [    2.153538] xhci_hcd 0000:06:00.0: xHCI Host Controller
  569. [    2.153542] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 5
  570. [    2.153624] xhci_hcd 0000:06:00.0: hcc params 0x040050af hci version 0x100 quirks 0x0000000000080490
  571. [    2.153783] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
  572. [    2.153784] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  573. [    2.153785] usb usb5: Product: xHCI Host Controller
  574. [    2.153786] usb usb5: Manufacturer: Linux 4.19.0-9-amd64 xhci-hcd
  575. [    2.153786] usb usb5: SerialNumber: 0000:06:00.0
  576. [    2.153961] hub 5-0:1.0: USB hub found
  577. [    2.153968] hub 5-0:1.0: 2 ports detected
  578. [    2.154069] xhci_hcd 0000:06:00.0: xHCI Host Controller
  579. [    2.154071] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 6
  580. [    2.154074] xhci_hcd 0000:06:00.0: Host supports USB 3.0 SuperSpeed
  581. [    2.154086] ehci-pci 0000:00:16.2: EHCI Host Controller
  582. [    2.154099] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
  583. [    2.154115] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
  584. [    2.154116] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  585. [    2.154117] usb usb6: Product: xHCI Host Controller
  586. [    2.154118] usb usb6: Manufacturer: Linux 4.19.0-9-amd64 xhci-hcd
  587. [    2.154118] usb usb6: SerialNumber: 0000:06:00.0
  588. [    2.154198] hub 6-0:1.0: USB hub found
  589. [    2.154207] hub 6-0:1.0: 2 ports detected
  590. [    2.154297] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 7
  591. [    2.154299] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
  592. [    2.154307] ehci-pci 0000:00:16.2: debug port 1
  593. [    2.154340] ehci-pci 0000:00:16.2: irq 17, io mem 0xfe704000
  594. [    2.173173] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
  595. [    2.173215] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
  596. [    2.173217] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  597. [    2.173218] usb usb7: Product: EHCI Host Controller
  598. [    2.173218] usb usb7: Manufacturer: Linux 4.19.0-9-amd64 ehci_hcd
  599. [    2.173219] usb usb7: SerialNumber: 0000:00:16.2
  600. [    2.173373] hub 7-0:1.0: USB hub found
  601. [    2.173378] hub 7-0:1.0: 4 ports detected
  602. [    2.174553] ohci-pci: OHCI PCI platform driver
  603. [    2.174998] ohci-pci 0000:00:12.0: OHCI PCI host controller
  604. [    2.175008] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 8
  605. [    2.175044] ohci-pci 0000:00:12.0: irq 18, io mem 0xfe70a000
  606. [    2.195270] MXM: GUID detected in BIOS
  607. [    2.195627] nouveau 0000:03:00.0: NVIDIA GM200 (120080a1)
  608. [    2.225717] firewire_ohci 0000:04:0e.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
  609. [    2.266327] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
  610. [    2.266328] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  611. [    2.266329] usb usb8: Product: OHCI PCI host controller
  612. [    2.266329] usb usb8: Manufacturer: Linux 4.19.0-9-amd64 ohci_hcd
  613. [    2.266330] usb usb8: SerialNumber: 0000:00:12.0
  614. [    2.296943] nouveau 0000:03:00.0: bios: version 84.00.36.00.4c
  615. [    2.297000] hub 8-0:1.0: USB hub found
  616. [    2.297006] hub 8-0:1.0: 5 ports detected
  617. [    2.297586] nouveau 0000:03:00.0: firmware: direct-loading firmware nvidia/gm200/gr/sw_nonctx.bin
  618. [    2.297603] nouveau 0000:03:00.0: firmware: direct-loading firmware nvidia/gm200/gr/sw_ctx.bin
  619. [    2.297627] nouveau 0000:03:00.0: firmware: direct-loading firmware nvidia/gm200/gr/sw_bundle_init.bin
  620. [    2.297655] nouveau 0000:03:00.0: firmware: direct-loading firmware nvidia/gm200/gr/sw_method_init.bin
  621. [    2.297922] ohci-pci 0000:00:13.0: OHCI PCI host controller
  622. [    2.297930] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 9
  623. [    2.297954] ohci-pci 0000:00:13.0: irq 18, io mem 0xfe708000
  624. [    2.298270] nouveau 0000:03:00.0: fb: 6144 MiB GDDR5
  625. [    2.298297] nouveau 0000:03:00.0: bus: MMIO write of 80000136 FAULT at 10eb14 [ IBUS ]
  626. [    2.363606] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
  627. [    2.363607] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  628. [    2.363608] usb usb9: Product: OHCI PCI host controller
  629. [    2.363608] usb usb9: Manufacturer: Linux 4.19.0-9-amd64 ohci_hcd
  630. [    2.363609] usb usb9: SerialNumber: 0000:00:13.0
  631. [    2.364775] hub 9-0:1.0: USB hub found
  632. [    2.364781] hub 9-0:1.0: 5 ports detected
  633. [    2.364899] [TTM] Zone  kernel: Available graphics memory: 8234854 kiB
  634. [    2.364900] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
  635. [    2.364901] [TTM] Initializing pool allocator
  636. [    2.364904] [TTM] Initializing DMA pool allocator
  637. [    2.364916] nouveau 0000:03:00.0: DRM: VRAM: 6144 MiB
  638. [    2.364917] nouveau 0000:03:00.0: DRM: GART: 1048576 MiB
  639. [    2.364920] nouveau 0000:03:00.0: DRM: TMDS table version 2.0
  640. [    2.364921] nouveau 0000:03:00.0: DRM: DCB version 4.1
  641. [    2.364922] nouveau 0000:03:00.0: DRM: DCB outp 00: 01000f02 00020030
  642. [    2.364924] nouveau 0000:03:00.0: DRM: DCB outp 01: 02000f00 00000000
  643. [    2.364925] nouveau 0000:03:00.0: DRM: DCB outp 02: 04812f96 04400020
  644. [    2.364926] nouveau 0000:03:00.0: DRM: DCB outp 03: 04012f92 00020020
  645. [    2.364927] nouveau 0000:03:00.0: DRM: DCB outp 04: 04821f86 04400010
  646. [    2.364928] nouveau 0000:03:00.0: DRM: DCB outp 05: 04021f82 00020010
  647. [    2.364929] nouveau 0000:03:00.0: DRM: DCB outp 07: 02033f62 00020010
  648. [    2.364930] nouveau 0000:03:00.0: DRM: DCB outp 08: 02844f76 04400020
  649. [    2.364931] nouveau 0000:03:00.0: DRM: DCB outp 09: 02044f72 00020020
  650. [    2.364932] nouveau 0000:03:00.0: DRM: DCB outp 10: 01d55ff8 00000000
  651. [    2.364933] nouveau 0000:03:00.0: DRM: DCB conn 00: 00001030
  652. [    2.364934] nouveau 0000:03:00.0: DRM: DCB conn 01: 01000146
  653. [    2.364934] nouveau 0000:03:00.0: DRM: DCB conn 02: 02000246
  654. [    2.364935] nouveau 0000:03:00.0: DRM: DCB conn 03: 00010361
  655. [    2.364936] nouveau 0000:03:00.0: DRM: DCB conn 04: 00020446
  656. [    2.364937] nouveau 0000:03:00.0: DRM: DCB conn 05: 00000570
  657. [    2.366227] ohci-pci 0000:00:14.5: OHCI PCI host controller
  658. [    2.366233] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 10
  659. [    2.366250] ohci-pci 0000:00:14.5: irq 18, io mem 0xfe706000
  660. [    2.429251] usb usb10: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
  661. [    2.429252] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  662. [    2.429253] usb usb10: Product: OHCI PCI host controller
  663. [    2.429254] usb usb10: Manufacturer: Linux 4.19.0-9-amd64 ohci_hcd
  664. [    2.429255] usb usb10: SerialNumber: 0000:00:14.5
  665. [    2.429366] hub 10-0:1.0: USB hub found
  666. [    2.429372] hub 10-0:1.0: 2 ports detected
  667. [    2.429600] ohci-pci 0000:00:16.0: OHCI PCI host controller
  668. [    2.429605] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 11
  669. [    2.429628] ohci-pci 0000:00:16.0: irq 18, io mem 0xfe705000
  670. [    2.435579] nouveau 0000:03:00.0: DRM: failed to create encoder 1/8/0: -19
  671. [    2.435585] nouveau 0000:03:00.0: DRM: Virtual-1 has no encoders, removing
  672. [    2.435656] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
  673. [    2.435656] [drm] Driver supports precise vblank timestamp query.
  674. [    2.452419] ata9: SATA link down (SStatus 0 SControl 300)
  675. [    2.452438] ata8: SATA link down (SStatus 0 SControl 300)
  676. [    2.452484] ata7: SATA link down (SStatus 0 SControl 300)
  677. [    2.452514] ata10: SATA link down (SStatus 0 SControl 300)
  678. [    2.493249] usb usb11: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
  679. [    2.493250] usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  680. [    2.493251] usb usb11: Product: OHCI PCI host controller
  681. [    2.493252] usb usb11: Manufacturer: Linux 4.19.0-9-amd64 ohci_hcd
  682. [    2.493253] usb usb11: SerialNumber: 0000:00:16.0
  683. [    2.493363] hub 11-0:1.0: USB hub found
  684. [    2.493369] hub 11-0:1.0: 4 ports detected
  685. [    2.510797] nouveau 0000:03:00.0: DRM: MM: using COPY for buffer copies
  686. [    2.544941] usb 2-1: new high-speed USB device number 2 using xhci_hcd
  687. [    2.565142] tsc: Refined TSC clocksource calibration: 3315.115 MHz
  688. [    2.565160] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2fc912f2300, max_idle_ns: 440795334375 ns
  689. [    2.577142] clocksource: Switched to clocksource tsc
  690. [    2.613190] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  691. [    2.613229] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  692. [    2.613274] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  693. [    2.613332] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  694. [    2.613369] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  695. [    2.613405] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  696. [    2.613549] ata6.00: ATAPI: ATAPI   iHAS524   A, BL2J, max UDMA/100
  697. [    2.614217] ata2.00: ATA-8: Hitachi HDP725050GLA360, GM4OA5CA, max UDMA/133
  698. [    2.614219] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32), AA
  699. [    2.614228] ata3.00: ATA-8: Hitachi HDP725050GLA360, GM4OA5CA, max UDMA/133
  700. [    2.614230] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32), AA
  701. [    2.614267] ata6.00: configured for UDMA/100
  702. [    2.614311] ata4.00: ATA-8: Hitachi HDP725050GLA360, GM4OA5CA, max UDMA/133
  703. [    2.614313] ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32), AA
  704. [    2.614344] ata1.00: ATA-8: Hitachi HDP725050GLA360, GM4OA5CA, max UDMA/133
  705. [    2.614346] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32), AA
  706. [    2.614350] ata5.00: ATA-8: Hitachi HDP725050GLA360, GM4OA5CA, max UDMA/133
  707. [    2.614352] ata5.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32), AA
  708. [    2.615345] ata3.00: configured for UDMA/133
  709. [    2.615385] ata2.00: configured for UDMA/133
  710. [    2.615436] ata4.00: configured for UDMA/133
  711. [    2.615446] ata5.00: configured for UDMA/133
  712. [    2.615490] ata1.00: configured for UDMA/133
  713. [    2.615653] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HDP72505 A5CA PQ: 0 ANSI: 5
  714. [    2.615978] scsi 1:0:0:0: Direct-Access     ATA      Hitachi HDP72505 A5CA PQ: 0 ANSI: 5
  715. [    2.618634] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
  716. [    2.618639] sd 0:0:0:0: [sda] Write Protect is off
  717. [    2.618640] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  718. [    2.618648] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  719. [    2.618670] sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/466 GiB)
  720. [    2.618675] sd 1:0:0:0: [sdb] Write Protect is off
  721. [    2.618677] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
  722. [    2.618683] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  723. [    2.625713] scsi 2:0:0:0: Direct-Access     ATA      Hitachi HDP72505 A5CA PQ: 0 ANSI: 5
  724. [    2.625969] sd 2:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/466 GiB)
  725. [    2.625973] sd 2:0:0:0: [sdc] Write Protect is off
  726. [    2.625974] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
  727. [    2.625985] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  728. [    2.626231] scsi 3:0:0:0: Direct-Access     ATA      Hitachi HDP72505 A5CA PQ: 0 ANSI: 5
  729. [    2.626365] sd 3:0:0:0: [sdd] 976773168 512-byte logical blocks: (500 GB/466 GiB)
  730. [    2.626369] sd 3:0:0:0: [sdd] Write Protect is off
  731. [    2.626370] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
  732. [    2.626376] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  733. [    2.626616] scsi 4:0:0:0: Direct-Access     ATA      Hitachi HDP72505 A5CA PQ: 0 ANSI: 5
  734. [    2.626737] sd 4:0:0:0: [sde] 976773168 512-byte logical blocks: (500 GB/466 GiB)
  735. [    2.626742] sd 4:0:0:0: [sde] Write Protect is off
  736. [    2.626743] sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
  737. [    2.626749] sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  738. [    2.627855] scsi 5:0:0:0: CD-ROM            ATAPI    iHAS524   A      BL2J PQ: 0 ANSI: 5
  739. [    2.657652]  sda: sda1 < sda5 > sda2
  740. [    2.658003] sd 0:0:0:0: [sda] Attached SCSI removable disk
  741. [    2.663730]  sdb: sdb1 < sdb5 > sdb2
  742. [    2.664061] sd 1:0:0:0: [sdb] Attached SCSI removable disk
  743. [    2.670391]  sdc: sdc1 < sdc5 > sdc2
  744. [    2.670581]  sdd: sdd1 < sdd5 > sdd2
  745. [    2.670773] sd 2:0:0:0: [sdc] Attached SCSI removable disk
  746. [    2.670898] sd 3:0:0:0: [sdd] Attached SCSI removable disk
  747. [    2.674327]  sde: sde1 < sde5 > sde2
  748. [    2.674663] sd 4:0:0:0: [sde] Attached SCSI removable disk
  749. [    2.779626] sr 5:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
  750. [    2.779628] cdrom: Uniform CD-ROM driver Revision: 3.20
  751. [    2.779876] sr 5:0:0:0: Attached scsi CD-ROM sr0
  752. [    2.801525] nouveau 0000:03:00.0: firmware: direct-loading firmware nvidia/gm200/gr/fecs_bl.bin
  753. [    2.801548] nouveau 0000:03:00.0: firmware: direct-loading firmware nvidia/gm200/gr/fecs_inst.bin
  754. [    2.801571] nouveau 0000:03:00.0: firmware: direct-loading firmware nvidia/gm200/gr/fecs_data.bin
  755. [    2.801580] nouveau 0000:03:00.0: firmware: direct-loading firmware nvidia/gm200/gr/fecs_sig.bin
  756. [    2.801604] nouveau 0000:03:00.0: firmware: direct-loading firmware nvidia/gm200/gr/gpccs_bl.bin
  757. [    2.801618] nouveau 0000:03:00.0: firmware: direct-loading firmware nvidia/gm200/gr/gpccs_inst.bin
  758. [    2.801629] nouveau 0000:03:00.0: firmware: direct-loading firmware nvidia/gm200/gr/gpccs_data.bin
  759. [    2.801639] nouveau 0000:03:00.0: firmware: direct-loading firmware nvidia/gm200/gr/gpccs_sig.bin
  760. [    2.801728] nouveau 0000:03:00.0: firmware: direct-loading firmware nvidia/gm200/acr/ucode_load.bin
  761. [    2.801772] nouveau 0000:03:00.0: firmware: direct-loading firmware nvidia/gm200/acr/ucode_unload.bin
  762. [    2.801801] nouveau 0000:03:00.0: firmware: direct-loading firmware nvidia/gm200/acr/bl.bin
  763. [    2.806340] usb 2-1: New USB device found, idVendor=2109, idProduct=2811, bcdDevice=85.70
  764. [    2.806341] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  765. [    2.806342] usb 2-1: Product: USB 2.0 HUB
  766.                    
  767. [    2.807139] hub 2-1:1.0: USB hub found
  768. [    2.810579] hub 2-1:1.0: 4 ports detected
  769. [    2.946096] nouveau 0000:03:00.0: DRM: allocated 2560x1600 fb: 0xa0000, bo (____ptrval____)
  770. [    2.980357] fbcon: nouveaufb (fb0) is primary device
  771. [    3.029165] usb 3-1: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
  772. [    3.105139] raid6: sse2x1   gen()  4625 MB/s
  773. [    3.173116] raid6: sse2x1   xor()  4873 MB/s
  774. [    3.175756] usb 3-1: New USB device found, idVendor=2109, idProduct=8110, bcdDevice=85.71
  775. [    3.175757] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  776. [    3.175758] usb 3-1: Product: USB 3.0 HUB
  777.                    
  778. [    3.175759] usb 3-1: Manufacturer: VLI Labs, Inc.
  779. [    3.238427] hub 3-1:1.0: USB hub found
  780. [    3.238580] hub 3-1:1.0: 4 ports detected
  781. [    3.238624] firewire_core 0000:04:0e.0: created device fw0: GUID 0035d474d7c58b00, S400
  782. [    3.241136] raid6: sse2x2   gen()  7250 MB/s
  783. [    3.290924] Console: switching to colour frame buffer device 240x67
  784. [    3.291314] nouveau 0000:03:00.0: fb0: nouveaufb frame buffer device
  785. [    3.309135] raid6: sse2x2   xor()  8282 MB/s
  786. [    3.377163] raid6: sse2x4   gen()  8966 MB/s
  787. [    3.393167] usb 9-2: new full-speed USB device number 2 using ohci-pci
  788. [    3.445162] raid6: sse2x4   xor()  3916 MB/s
  789. [    3.445163] raid6: using algorithm sse2x4 gen() 8966 MB/s
  790. [    3.445164] raid6: .... xor() 3916 MB/s, rmw enabled
  791. [    3.445165] raid6: using intx1 recovery algorithm
  792. [    3.446097] xor: measuring software checksum speed
  793. [    3.485145]    prefetch64-sse: 14394.000 MB/sec
  794. [    3.509171] usb 4-4: new high-speed USB device number 3 using ehci-pci
  795. [    3.525130]    generic_sse: 13717.000 MB/sec
  796. [    3.525135] xor: using function: prefetch64-sse (14394.000 MB/sec)
  797. [    3.525823] async_tx: api initialized (async)
  798. [    3.534269] md/raid:md0: device sda2 operational as raid disk 0
  799. [    3.534270] md/raid:md0: device sdb2 operational as raid disk 1
  800. [    3.534271] md/raid:md0: device sde2 operational as raid disk 4
  801. [    3.534272] md/raid:md0: device sdc2 operational as raid disk 2
  802. [    3.534272] md/raid:md0: device sdd2 operational as raid disk 3
  803. [    3.534728] md/raid:md0: raid level 5 active with 5 out of 5 devices, algorithm 2
  804. [    3.534913] random: crng init done
  805. [    3.549401] [drm] Initialized nouveau 1.3.1 20120801 for 0000:03:00.0 on minor 0
  806. [    3.568947] md0: detected capacity change from 0 to 1999873507328
  807. [    3.604049] usb 9-2: New USB device found, idVendor=0c4b, idProduct=0501, bcdDevice= 0.01
  808. [    3.604055] usb 9-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  809. [    3.604060] usb 9-2: Product: cyberJack RFID komfort
  810. [    3.604063] usb 9-2: Manufacturer: REINER SCT
  811. [    3.604066] usb 9-2: SerialNumber: 8063573163
  812. [    3.667127] usb 4-4: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=32.98
  813. [    3.667133] usb 4-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  814. [    3.667136] usb 4-4: Product: USB2.0 Hub
  815. [    3.667729] hub 4-4:1.0: USB hub found
  816. [    3.668121] hub 4-4:1.0: 4 ports detected
  817. [    3.868201] Btrfs loaded, crc32c=crc32c-generic
  818. [    3.969184] usb 9-5: new low-speed USB device number 3 using ohci-pci
  819. [    3.971969] BTRFS: device label root devid 1 transid 10450 /dev/md0
  820. [    3.987672] PM: Image not found (code -22)
  821. [    4.003287] BTRFS info (device md0): disk space caching is enabled
  822. [    4.003288] BTRFS info (device md0): has skinny extents
  823. [    4.170027] usb 9-5: New USB device found, idVendor=046d, idProduct=c404, bcdDevice= 2.20
  824. [    4.170034] usb 9-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  825. [    4.170038] usb 9-5: Product: Trackball
  826. [    4.170042] usb 9-5: Manufacturer: Logitech
  827. [    4.517159] usb 4-4.2: new full-speed USB device number 5 using ehci-pci
  828. [    4.628750] usb 4-4.2: New USB device found, idVendor=0665, idProduct=6000, bcdDevice= 0.97
  829. [    4.628756] usb 4-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  830. [    4.628760] usb 4-4.2: Product: Gaming keyboard
  831. [    4.628763] usb 4-4.2: Manufacturer: EST
  832. [    5.140847] systemd[1]: Inserted module 'autofs4'
  833. [    5.225894] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
  834. [    5.245300] systemd[1]: Detected architecture x86-64.
  835. [    5.255323] systemd[1]: Set hostname to <PX6-330>.
  836. [    5.790130] systemd[1]: Created slice system-getty.slice.
  837. [    5.790274] systemd[1]: Listening on udev Control Socket.
  838. [    5.792454] systemd[1]: Listening on Journal Socket.
  839. [    5.793102] systemd[1]: Starting Create list of required static device nodes for the current kernel...
  840. [    5.793901] systemd[1]: Mounting Huge Pages File System...
  841. [    5.794175] systemd[1]: Created slice User and Session Slice.
  842. [    5.794195] systemd[1]: Reached target Slices.
  843. [    5.895902] BTRFS info (device md0): disk space caching is enabled
  844. [    5.980270] systemd-journald[340]: Received request to flush runtime journal from PID 1
  845. [    5.983767] lp: driver loaded but no devices found
  846. [    5.996149] ppdev: user-space parallel port driver
  847. [    6.355030] audit: type=1400 audit(1589736426.088:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/haveged" pid=381 comm="apparmor_parser"
  848. [    6.355512] audit: type=1400 audit(1589736426.088:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=380 comm="apparmor_parser"
  849. [    6.355516] audit: type=1400 audit(1589736426.088:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=380 comm="apparmor_parser"
  850. [    6.355752] audit: type=1400 audit(1589736426.088:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=382 comm="apparmor_parser"
  851. [    6.355756] audit: type=1400 audit(1589736426.088:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=382 comm="apparmor_parser"
  852. [    6.355758] audit: type=1400 audit(1589736426.088:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=382 comm="apparmor_parser"
  853. [    6.370076] audit: type=1400 audit(1589736426.108:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=385 comm="apparmor_parser"
  854. [    6.370439] audit: type=1400 audit(1589736426.108:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=388 comm="apparmor_parser"
  855. [    6.376397] audit: type=1400 audit(1589736426.112:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/mysqld-akonadi" pid=384 comm="apparmor_parser"
  856. [    6.376410] audit: type=1400 audit(1589736426.112:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/mysqld-akonadi///usr/sbin/mysqld" pid=384 comm="apparmor_parser"
  857. [    6.774860] acpi_cpufreq: overriding BIOS provided _PSD data
  858. [    6.780131] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
  859. [    6.780234] sp5100-tco sp5100-tco: Using 0xfed80b00 for watchdog MMIO address
  860. [    6.782996] sp5100-tco sp5100-tco: initialized. heartbeat=60 sec (nowayout=0)
  861. [    6.791349] input: PC Speaker as /devices/platform/pcspkr/input/input3
  862. [    6.822818] sd 0:0:0:0: Attached scsi generic sg0 type 0
  863. [    6.823215] sd 1:0:0:0: Attached scsi generic sg1 type 0
  864. [    6.823254] sd 2:0:0:0: Attached scsi generic sg2 type 0
  865. [    6.823281] sd 3:0:0:0: Attached scsi generic sg3 type 0
  866. [    6.823323] sd 4:0:0:0: Attached scsi generic sg4 type 0
  867. [    6.823355] sr 5:0:0:0: Attached scsi generic sg5 type 5
  868. [    7.098544] hidraw: raw HID events driver (C) Jiri Kosina
  869. [    7.190782] usbcore: registered new interface driver usbhid
  870. [    7.190783] usbhid: USB HID core driver
  871. [    7.195321] kvm: Nested Virtualization enabled
  872. [    7.195324] kvm: Nested Paging enabled
  873. [    7.218827] MCE: In-kernel MCE decoding enabled.
  874. [    7.263130] EDAC amd64: Node 0: DRAM ECC disabled.
  875. [    7.263135] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
  876.                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
  877.                (Note that use of the override may cause unknown side effects.)
  878. [    7.302083] EDAC amd64: Node 0: DRAM ECC disabled.
  879. [    7.302086] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
  880.                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
  881.                (Note that use of the override may cause unknown side effects.)
  882. [    7.302100] input: Logitech Trackball as /devices/pci0000:00/0000:00:13.0/usb9/9-5/9-5:1.0/0003:046D:C404.0001/input/input4
  883. [    7.304945] hid-generic 0003:046D:C404.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech Trackball] on usb-0000:00:13.0-5/input0
  884. [    7.305218] input: EST Gaming keyboard as /devices/pci0000:00/0000:00:13.2/usb4/4-4/4-4.2/4-4.2:1.0/0003:0665:6000.0002/input/input5
  885. [    7.346474] EDAC amd64: Node 0: DRAM ECC disabled.
  886. [    7.346480] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
  887.                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
  888.                (Note that use of the override may cause unknown side effects.)
  889. [    7.360849] snd_hda_intel 0000:03:00.1: Disabling MSI
  890. [    7.360864] snd_hda_intel 0000:03:00.1: Handle vga_switcheroo audio client
  891. [    7.369417] hid-generic 0003:0665:6000.0002: input,hidraw1: USB HID v1.11 Keyboard [EST Gaming keyboard] on usb-0000:00:13.2-4.2/input0
  892. [    7.370139] input: EST Gaming keyboard as /devices/pci0000:00/0000:00:13.2/usb4/4-4/4-4.2/4-4.2:1.1/0003:0665:6000.0003/input/input6
  893. [    7.410085] EDAC amd64: Node 0: DRAM ECC disabled.
  894. [    7.410089] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
  895.                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
  896.                (Note that use of the override may cause unknown side effects.)
  897. [    7.429466] hid-generic 0003:0665:6000.0003: input,hidraw2: USB HID v1.11 Device [EST Gaming keyboard] on usb-0000:00:13.2-4.2/input1
  898. [    7.429971] input: EST Gaming keyboard as /devices/pci0000:00/0000:00:13.2/usb4/4-4/4-4.2/4-4.2:1.2/0003:0665:6000.0004/input/input7
  899. [    7.458411] EDAC amd64: Node 0: DRAM ECC disabled.
  900. [    7.458417] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
  901.                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
  902.                (Note that use of the override may cause unknown side effects.)
  903. [    7.494796] hid-generic 0003:0665:6000.0004: input,hidraw3: USB HID v1.11 Keyboard [EST Gaming keyboard] on usb-0000:00:13.2-4.2/input2
  904. [    7.506457] EDAC amd64: Node 0: DRAM ECC disabled.
  905. [    7.506462] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
  906.                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
  907.                (Note that use of the override may cause unknown side effects.)
  908. [    7.539372] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC889: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
  909. [    7.539376] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
  910. [    7.539378] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
  911. [    7.539380] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
  912. [    7.539382] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x11/0x1e
  913. [    7.539384] snd_hda_codec_realtek hdaudioC0D0:    inputs:
  914. [    7.539386] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
  915. [    7.539388] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
  916. [    7.539390] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
  917. [    7.559933] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
  918. [    7.560111] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
  919. [    7.560268] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
  920. [    7.560429] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
  921. [    7.560579] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
  922. [    7.560728] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input13
  923. [    7.560892] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input14
  924. [    7.561043] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input15
  925. [    7.577387] Adding 1020k swap on /dev/sdc5.  Priority:-2 extents:1 across:1020k FS
  926. [    7.577512] Adding 1020k swap on /dev/sde5.  Priority:-3 extents:1 across:1020k FS
  927. [    7.587619] Adding 1020k swap on /dev/sdb5.  Priority:-4 extents:1 across:1020k FS
  928. [    7.649546] Adding 1020k swap on /dev/sdd5.  Priority:-5 extents:1 across:1020k FS
  929. [    7.649772] Adding 1020k swap on /dev/sda5.  Priority:-6 extents:1 across:1020k FS
  930. [    9.211208] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready
  931. [    9.232417] r8169 0000:05:00.0: firmware: direct-loading firmware rtl_nic/rtl8168e-3.fw
  932. [    9.232700] RTL8211E Gigabit Ethernet r8169-500:00: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=r8169-500:00, irq=IGNORE)
  933. [    9.391895] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:0b.0/0000:03:00.1/sound/card1/input16
  934. [    9.392116] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:0b.0/0000:03:00.1/sound/card1/input17
  935. [    9.392327] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:0b.0/0000:03:00.1/sound/card1/input18
  936. [    9.395492] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:0b.0/0000:03:00.1/sound/card1/input19
  937. [    9.443290] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready
  938.  
  939.  
  940.  
  941. lspci -k
  942.  
  943. 00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD9x0/RX980 Host Bridge (rev 02)
  944.         Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] RD9x0/RX980 Host Bridge
  945. 00:00.2 IOMMU: Advanced Micro Devices, Inc. [AMD/ATI] RD890S/RD990 I/O Memory Management Unit (IOMMU)
  946.         Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] RD890S/RD990 I/O Memory Management Unit (IOMMU)
  947. 00:09.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890/RD9x0/RX980 PCI to PCI bridge (PCI Express GPP Port 4)
  948.         Kernel driver in use: pcieport
  949. 00:0a.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890/RD9x0/RX980 PCI to PCI bridge (PCI Express GPP Port 5)
  950.         Kernel driver in use: pcieport
  951. 00:0b.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890/RD990 PCI to PCI bridge (PCI Express GFX2 port 0)
  952.         Kernel driver in use: pcieport
  953. 00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] (rev 40)
  954.         Subsystem: Gigabyte Technology Co., Ltd SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode]
  955.         Kernel driver in use: ahci
  956.         Kernel modules: ahci
  957. 00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
  958.         Subsystem: Gigabyte Technology Co., Ltd SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
  959.         Kernel driver in use: ohci-pci
  960.         Kernel modules: ohci_pci
  961. 00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
  962.         Subsystem: Gigabyte Technology Co., Ltd SB7x0/SB8x0/SB9x0 USB EHCI Controller
  963.         Kernel driver in use: ehci-pci
  964.         Kernel modules: ehci_pci
  965. 00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
  966.         Subsystem: Gigabyte Technology Co., Ltd SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
  967.         Kernel driver in use: ohci-pci
  968.         Kernel modules: ohci_pci
  969. 00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
  970.         Subsystem: Gigabyte Technology Co., Ltd SB7x0/SB8x0/SB9x0 USB EHCI Controller
  971.         Kernel driver in use: ehci-pci
  972.         Kernel modules: ehci_pci
  973. 00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller (rev 42)
  974.         Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller
  975.         Kernel driver in use: piix4_smbus
  976.         Kernel modules: i2c_piix4, sp5100_tco
  977. 00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA) (rev 40)
  978.         Subsystem: Gigabyte Technology Co., Ltd SBx00 Azalia (Intel HDA)
  979.         Kernel driver in use: snd_hda_intel
  980.         Kernel modules: snd_hda_intel
  981. 00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller (rev 40)
  982.         Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller
  983. 00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI to PCI Bridge (rev 40)
  984. 00:14.5 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI2 Controller
  985.         Subsystem: Gigabyte Technology Co., Ltd SB7x0/SB8x0/SB9x0 USB OHCI2 Controller
  986.         Kernel driver in use: ohci-pci
  987.         Kernel modules: ohci_pci
  988. 00:15.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB700/SB800/SB900 PCI to PCI bridge (PCIE port 0)
  989.         Kernel driver in use: pcieport
  990. 00:15.1 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB700/SB800/SB900 PCI to PCI bridge (PCIE port 1)
  991.         Kernel driver in use: pcieport
  992. 00:15.2 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB900 PCI to PCI bridge (PCIE port 2)
  993.         Kernel driver in use: pcieport
  994. 00:15.3 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB900 PCI to PCI bridge (PCIE port 3)
  995.         Kernel driver in use: pcieport
  996. 00:16.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
  997.         Subsystem: Gigabyte Technology Co., Ltd SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
  998.         Kernel driver in use: ohci-pci
  999.         Kernel modules: ohci_pci
  1000. 00:16.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
  1001.         Subsystem: Gigabyte Technology Co., Ltd SB7x0/SB8x0/SB9x0 USB EHCI Controller
  1002.         Kernel driver in use: ehci-pci
  1003.         Kernel modules: ehci_pci
  1004. 00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor HyperTransport Configuration
  1005. 00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Address Map
  1006. 00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor DRAM Controller
  1007. 00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Miscellaneous Control
  1008.         Kernel driver in use: k10temp
  1009.         Kernel modules: k10temp
  1010. 00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Link Control
  1011. 01:00.0 USB controller: Etron Technology, Inc. EJ168 USB 3.0 Host Controller (rev 01)
  1012.         Subsystem: Gigabyte Technology Co., Ltd EJ168 USB 3.0 Host Controller
  1013.         Kernel driver in use: xhci_hcd
  1014.         Kernel modules: xhci_pci
  1015. 02:00.0 SATA controller: Marvell Technology Group Ltd. 88SE9172 SATA 6Gb/s Controller (rev 12)
  1016.         Subsystem: Gigabyte Technology Co., Ltd 88SE9172 SATA 6Gb/s Controller
  1017.         Kernel driver in use: ahci
  1018.         Kernel modules: ahci
  1019. 03:00.0 VGA compatible controller: NVIDIA Corporation GM200 [GeForce GTX 980 Ti] (rev a1)
  1020.         Subsystem: PNY GM200 [GeForce GTX 980 Ti]
  1021.         Kernel driver in use: nouveau
  1022.         Kernel modules: nouveau
  1023. 03:00.1 Audio device: NVIDIA Corporation GM200 High Definition Audio (rev a1)
  1024.         Subsystem: PNY GM200 High Definition Audio
  1025.         Kernel driver in use: snd_hda_intel
  1026.         Kernel modules: snd_hda_intel
  1027. 04:0e.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller (rev c0)
  1028.         Subsystem: Gigabyte Technology Co., Ltd GA-7VT600-1394 Motherboard
  1029.         Kernel driver in use: firewire_ohci
  1030.         Kernel modules: firewire_ohci
  1031. 05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06)
  1032.         Subsystem: Gigabyte Technology Co., Ltd Onboard Ethernet
  1033.         Kernel driver in use: r8169
  1034.         Kernel modules: r8169
  1035. 06:00.0 USB controller: Etron Technology, Inc. EJ168 USB 3.0 Host Controller (rev 01)
  1036.         Subsystem: Gigabyte Technology Co., Ltd EJ168 USB 3.0 Host Controller
  1037.         Kernel driver in use: xhci_hcd
  1038.         Kernel modules: xhci_pci
  1039. 07:00.0 SATA controller: Marvell Technology Group Ltd. 88SE9172 SATA 6Gb/s Controller (rev 12)
  1040.         Subsystem: Gigabyte Technology Co., Ltd 88SE9172 SATA 6Gb/s Controller
  1041.         Kernel driver in use: ahci
  1042.         Kernel modules: ahci
  1043. 08:00.0 Network controller: Intel Corporation Device 2723 (rev 1a)
  1044.         Subsystem: Intel Corporation Device 0084
  1045.  
  1046.  
  1047. uname -r
  1048.  
  1049. 4.19.0-9-amd64

Quellcode

Hier kannst du den Code kopieren und ihn in deinen bevorzugten Editor einfügen. Alternativ kannst du den gesamten Eintrag auch als Datei herunterladen.