Nach Tausch der Netzwerkkarte kein WLN mehr
von vdvogt- SNIPPET_TEXT:
-
- dmesg
- [ 0.000000] Linux version 4.19.0-9-amd64 (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP Debian 4.19.118-2 (2020-04-29)
- [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-9-amd64 root=UUID=0c462901-5854-4457-883d-e030a0ccc8e4 ro quiet
- [ 0.000000] x86/fpu: x87 FPU will use FXSAVE
- [ 0.000000] BIOS-provided physical RAM map:
- [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
- [ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000be47efff] usable
- [ 0.000000] BIOS-e820: [mem 0x00000000be47f000-0x00000000bea3cfff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000bea3d000-0x00000000bee36fff] ACPI NVS
- [ 0.000000] BIOS-e820: [mem 0x00000000bee37000-0x00000000bf156fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000bf157000-0x00000000bf157fff] usable
- [ 0.000000] BIOS-e820: [mem 0x00000000bf158000-0x00000000bf35dfff] ACPI NVS
- [ 0.000000] BIOS-e820: [mem 0x00000000bf35e000-0x00000000bf7fffff] usable
- [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fec20000-0x00000000fec20fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x0000000100001000-0x000000043fffffff] usable
- [ 0.000000] NX (Execute Disable) protection: active
- [ 0.000000] SMBIOS 2.7 present.
- [ 0.000000] DMI: Gigabyte Technology Co., Ltd. To be filled by O.E.M./990FXA-UD5, BIOS FB 01/23/2013
- [ 0.000000] tsc: Fast TSC calibration using PIT
- [ 0.000000] tsc: Detected 3314.932 MHz processor
- [ 0.002479] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
- [ 0.002480] e820: remove [mem 0x000a0000-0x000fffff] usable
- [ 0.008302] AGP: No AGP bridge found
- [ 0.008356] last_pfn = 0x440000 max_arch_pfn = 0x400000000
- [ 0.008358] MTRR default type: uncachable
- [ 0.008359] MTRR fixed ranges enabled:
- [ 0.008360] 00000-9FFFF write-back
- [ 0.008361] A0000-BFFFF write-through
- [ 0.008362] C0000-CEFFF write-protect
- [ 0.008362] CF000-EBFFF uncachable
- [ 0.008363] EC000-FFFFF write-protect
- [ 0.008364] MTRR variable ranges enabled:
- [ 0.008365] 0 base 000000000000 mask FFFF80000000 write-back
- [ 0.008366] 1 base 000080000000 mask FFFFC0000000 write-back
- [ 0.008367] 2 base 0000BF800000 mask FFFFFF800000 uncachable
- [ 0.008367] 3 disabled
- [ 0.008368] 4 disabled
- [ 0.008368] 5 disabled
- [ 0.008369] 6 disabled
- [ 0.008369] 7 disabled
- [ 0.008370] TOM2: 0000000440000000 aka 17408M
- [ 0.009480] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
- [ 0.009529] e820: update [mem 0xbf800000-0xffffffff] usable ==> reserved
- [ 0.009535] last_pfn = 0xbf800 max_arch_pfn = 0x400000000
- [ 0.012566] found SMP MP-table at [mem 0x000fd8c0-0x000fd8cf]
- [ 0.044232] Using GB pages for direct mapping
- [ 0.044234] BRK [0x2ae801000, 0x2ae801fff] PGTABLE
- [ 0.044236] BRK [0x2ae802000, 0x2ae802fff] PGTABLE
- [ 0.044237] BRK [0x2ae803000, 0x2ae803fff] PGTABLE
- [ 0.044265] BRK [0x2ae804000, 0x2ae804fff] PGTABLE
- [ 0.044360] BRK [0x2ae805000, 0x2ae805fff] PGTABLE
- [ 0.044385] BRK [0x2ae806000, 0x2ae806fff] PGTABLE
- [ 0.044428] BRK [0x2ae807000, 0x2ae807fff] PGTABLE
- [ 0.044456] BRK [0x2ae808000, 0x2ae808fff] PGTABLE
- [ 0.044574] RAMDISK: [mem 0x33539000-0x35a93fff]
- [ 0.044581] ACPI: Early table checksum verification disabled
- [ 0.057586] ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
- [ 0.057588] ACPI: XSDT 0x00000000BEE1A070 000064 (v01 ALASKA A M I 01072009 AMI 00010013)
- [ 0.057592] ACPI: FACP 0x00000000BEE20880 0000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
- [ 0.057596] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20180810/tbfadt-624)
- [ 0.057599] ACPI: DSDT 0x00000000BEE1A170 00670F (v02 ALASKA A M I 00000000 INTL 20051117)
- [ 0.057601] ACPI: FACS 0x00000000BEE31F80 000040
- [ 0.057603] ACPI: APIC 0x00000000BEE20978 00008E (v03 ALASKA A M I 01072009 AMI 00010013)
- [ 0.057605] ACPI: FPDT 0x00000000BEE20A08 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
- [ 0.057606] ACPI: MCFG 0x00000000BEE20A50 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
- [ 0.057608] ACPI: HPET 0x00000000BEE20A90 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
- [ 0.057610] ACPI: SSDT 0x00000000BEE20AC8 000E10 (v01 AMD POWERNOW 00000001 AMD 00000001)
- [ 0.057612] ACPI: MATS 0x00000000BEE218D8 000034 (v02 ALASKA A M I 00000002 w?x2 00000000)
- [ 0.057614] ACPI: IVRS 0x00000000BEE21910 0000E0 (v01 AMD RD890S 00202031 AMD 00000000)
- [ 0.057623] ACPI: Local APIC address 0xfee00000
- [ 0.057700] Scanning NUMA topology in Northbridge 24
- [ 0.057727] No NUMA configuration found
- [ 0.057728] Faking a node at [mem 0x0000000000000000-0x000000043fffffff]
- [ 0.057731] NODE_DATA(0) allocated [mem 0x43fff9000-0x43fffdfff]
- [ 0.057767] Zone ranges:
- [ 0.057768] DMA [mem 0x0000000000001000-0x0000000000ffffff]
- [ 0.057768] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
- [ 0.057769] Normal [mem 0x0000000100000000-0x000000043fffffff]
- [ 0.057771] Early memory node ranges
- [ 0.057772] node 0: [mem 0x0000000000001000-0x000000000009dfff]
- [ 0.057773] node 0: [mem 0x0000000000100000-0x00000000be47efff]
- [ 0.057773] node 0: [mem 0x00000000bf157000-0x00000000bf157fff]
- [ 0.057774] node 0: [mem 0x00000000bf35e000-0x00000000bf7fffff]
- [ 0.057774] node 0: [mem 0x0000000100001000-0x000000043fffffff]
- [ 0.057853] Zeroed struct page in unavailable ranges: 5954 pages
- [ 0.057854] Initmem setup node 0 [mem 0x0000000000001000-0x000000043fffffff]
- [ 0.057855] On node 0 totalpages: 4188350
- [ 0.057856] DMA zone: 64 pages used for memmap
- [ 0.057856] DMA zone: 21 pages reserved
- [ 0.057857] DMA zone: 3997 pages, LIFO batch:0
- [ 0.057937] DMA32 zone: 12133 pages used for memmap
- [ 0.057937] DMA32 zone: 776482 pages, LIFO batch:63
- [ 0.074715] Normal zone: 53248 pages used for memmap
- [ 0.074716] Normal zone: 3407871 pages, LIFO batch:63
- [ 0.145172] ACPI: PM-Timer IO Port: 0x808
- [ 0.145173] ACPI: Local APIC address 0xfee00000
- [ 0.145178] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
- [ 0.145185] IOAPIC[0]: apic_id 7, version 33, address 0xfec00000, GSI 0-23
- [ 0.145187] IOAPIC[1]: apic_id 8, version 33, address 0xfec20000, GSI 24-55
- [ 0.145189] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- [ 0.145190] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
- [ 0.145191] ACPI: IRQ0 used by override.
- [ 0.145192] ACPI: IRQ9 used by override.
- [ 0.145193] Using ACPI (MADT) for SMP configuration information
- [ 0.145195] ACPI: HPET id: 0x43538210 base: 0xfed00000
- [ 0.145198] smpboot: Allowing 6 CPUs, 0 hotplug CPUs
- [ 0.145216] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
- [ 0.145217] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
- [ 0.145218] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
- [ 0.145218] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
- [ 0.145219] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
- [ 0.145220] PM: Registered nosave memory: [mem 0xbe47f000-0xbea3cfff]
- [ 0.145221] PM: Registered nosave memory: [mem 0xbea3d000-0xbee36fff]
- [ 0.145221] PM: Registered nosave memory: [mem 0xbee37000-0xbf156fff]
- [ 0.145222] PM: Registered nosave memory: [mem 0xbf158000-0xbf35dfff]
- [ 0.145223] PM: Registered nosave memory: [mem 0xbf800000-0xf7ffffff]
- [ 0.145224] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
- [ 0.145224] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
- [ 0.145225] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
- [ 0.145225] PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
- [ 0.145226] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
- [ 0.145226] PM: Registered nosave memory: [mem 0xfec11000-0xfec1ffff]
- [ 0.145226] PM: Registered nosave memory: [mem 0xfec20000-0xfec20fff]
- [ 0.145227] PM: Registered nosave memory: [mem 0xfec21000-0xfecfffff]
- [ 0.145227] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
- [ 0.145228] PM: Registered nosave memory: [mem 0xfed01000-0xfed60fff]
- [ 0.145228] PM: Registered nosave memory: [mem 0xfed61000-0xfed70fff]
- [ 0.145229] PM: Registered nosave memory: [mem 0xfed71000-0xfed7ffff]
- [ 0.145229] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
- [ 0.145230] PM: Registered nosave memory: [mem 0xfed90000-0xfeefffff]
- [ 0.145230] PM: Registered nosave memory: [mem 0xfef00000-0xffffffff]
- [ 0.145230] PM: Registered nosave memory: [mem 0x100000000-0x100000fff]
- [ 0.145232] [mem 0xbf800000-0xf7ffffff] available for PCI devices
- [ 0.145233] Booting paravirtualized kernel on bare hardware
- [ 0.145236] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
- [ 0.241339] random: get_random_bytes called from start_kernel+0x93/0x52c with crng_init=0
- [ 0.241346] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:6 nr_node_ids:1
- [ 0.241917] percpu: Embedded 45 pages/cpu s144408 r8192 d31720 u262144
- [ 0.241923] pcpu-alloc: s144408 r8192 d31720 u262144 alloc=1*2097152
- [ 0.241923] pcpu-alloc: [0] 0 1 2 3 4 5 - -
- [ 0.241942] Built 1 zonelists, mobility grouping on. Total pages: 4122884
- [ 0.241943] Policy zone: Normal
- [ 0.241945] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-9-amd64 root=UUID=0c462901-5854-4457-883d-e030a0ccc8e4 ro quiet
- [ 0.256087] AGP: Checking aperture...
- [ 0.261904] AGP: No AGP bridge found
- [ 0.261906] AGP: Node 0: aperture [bus addr 0xf8000000-0xfbffffff] (64MB)
- [ 0.327647] Memory: 16361084K/16753400K available (10252K kernel code, 1241K rwdata, 3316K rodata, 1588K init, 2276K bss, 392316K reserved, 0K cma-reserved)
- [ 0.327761] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
- [ 0.327768] ftrace: allocating 31879 entries in 125 pages
- [ 0.337628] rcu: Hierarchical RCU implementation.
- [ 0.337629] rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=6.
- [ 0.337630] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
- [ 0.340278] NR_IRQS: 33024, nr_irqs: 1016, preallocated irqs: 16
- [ 0.340555] spurious 8259A interrupt: IRQ7.
- [ 0.344933] Console: colour VGA+ 80x25
- [ 0.344937] console [tty0] enabled
- [ 0.344956] ACPI: Core revision 20180810
- [ 0.345092] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
- [ 0.345102] hpet clockevent registered
- [ 0.345105] APIC: Switch to symmetric I/O mode setup
- [ 0.394073] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
- [ 0.413109] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2fc86622cf0, max_idle_ns: 440795279708 ns
- [ 0.413118] Calibrating delay loop (skipped), value calculated using timer frequency.. 6629.86 BogoMIPS (lpj=13259728)
- [ 0.413120] pid_max: default: 32768 minimum: 301
- [ 0.413151] Security Framework initialized
- [ 0.413152] Yama: disabled by default; enable with sysctl kernel.yama.*
- [ 0.413168] AppArmor: AppArmor initialized
- [ 0.419574] LVT offset 0 assigned for vector 0xf9
- [ 0.419576] process: using AMD E400 aware idle routine
- [ 0.419578] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
- [ 0.419579] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
- [ 0.419580] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
- [ 0.419582] Spectre V2 : Mitigation: Full AMD retpoline
- [ 0.419582] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
- [ 0.423501] Freeing SMP alternatives memory: 24K
- [ 0.536661] process: Switch to broadcast mode on CPU0
- [ 0.536666] smpboot: CPU0: AMD Phenom(tm) II X6 1100T Processor (family: 0x10, model: 0xa, stepping: 0x0)
- [ 0.536775] Performance Events: AMD PMU driver.
- [ 0.536778] ... version: 0
- [ 0.536778] ... bit width: 48
- [ 0.536779] ... generic registers: 4
- [ 0.536779] ... value mask: 0000ffffffffffff
- [ 0.536780] ... fixed-purpose events: 0
- [ 0.536780] ... event mask: 000000000000000f
- [ 0.536819] rcu: Hierarchical SRCU implementation.
- [ 0.537111] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
- [ 0.537111] smp: Bringing up secondary CPUs ...
- [ 0.537111] x86: Booting SMP configuration:
- [ 0.537111] .... node #0, CPUs: #1
- [ 0.052575] process: Switch to broadcast mode on CPU1
- [ 0.537111] #2
- [ 0.052575] process: Switch to broadcast mode on CPU2
- [ 0.537184] #3
- [ 0.052575] process: Switch to broadcast mode on CPU3
- [ 0.541196] #4
- [ 0.052575] process: Switch to broadcast mode on CPU4
- [ 0.545200] #5
- [ 0.052575] process: Switch to broadcast mode on CPU5
- [ 0.547750] smp: Brought up 1 node, 6 CPUs
- [ 0.547750] smpboot: Total of 6 processors activated (39779.18 BogoMIPS)
- [ 0.549914] devtmpfs: initialized
- [ 0.549914] x86/mm: Memory block size: 128MB
- [ 0.550639] PM: Registering ACPI NVS region [mem 0xbea3d000-0xbee36fff] (4169728 bytes)
- [ 0.550639] PM: Registering ACPI NVS region [mem 0xbf158000-0xbf35dfff] (2121728 bytes)
- [ 0.553207] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
- [ 0.553321] pinctrl core: initialized pinctrl subsystem
- [ 0.554211] NET: Registered protocol family 16
- [ 0.554286] audit: initializing netlink subsys (disabled)
- [ 0.554292] audit: type=2000 audit(1589736420.164:1): state=initialized audit_enabled=0 res=1
- [ 0.554292] cpuidle: using governor ladder
- [ 0.554292] cpuidle: using governor menu
- [ 0.554292] TOM: 00000000c0000000 aka 3072M
- [ 0.554292] Fam 10h mmconf [mem 0xe0000000-0xefffffff]
- [ 0.554292] node 0 link 0: mmio [c0000000, fef0ffff] ==> [c0000000, dfffffff] and [f0000000, fef0ffff]
- [ 0.554292] TOM2: 0000000440000000 aka 17408M
- [ 0.554292] bus: 00 [io 0x0000-0xffff]
- [ 0.554292] bus: 00 [mem 0xc0000000-0xdfffffff]
- [ 0.554292] bus: 00 [mem 0xf0000000-0xffffffff]
- [ 0.554292] bus: 00 [mem 0x440000000-0xfcffffffff]
- [ 0.554292] ACPI: bus type PCI registered
- [ 0.554292] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
- [ 0.554292] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
- [ 0.554292] PCI: not using MMCONFIG
- [ 0.554292] PCI: Using configuration type 1 for base access
- [ 0.554292] PCI: Using configuration type 1 for extended access
- [ 0.554292] mtrr: your CPUs had inconsistent variable MTRR settings
- [ 0.554292] mtrr: probably your BIOS does not setup all CPUs.
- [ 0.554292] mtrr: corrected configuration.
- [ 0.554292] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
- [ 0.554292] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
- [ 0.554292] ACPI: Added _OSI(Module Device)
- [ 0.554292] ACPI: Added _OSI(Processor Device)
- [ 0.554292] ACPI: Added _OSI(3.0 _SCP Extensions)
- [ 0.554292] ACPI: Added _OSI(Processor Aggregator Device)
- [ 0.554292] ACPI: Added _OSI(Linux-Dell-Video)
- [ 0.554292] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
- [ 0.558572] ACPI: 2 ACPI AML tables successfully acquired and loaded
- [ 0.559474] ACPI: Interpreter enabled
- [ 0.559490] ACPI: (supports S0 S3 S4 S5)
- [ 0.559490] ACPI: Using IOAPIC for interrupt routing
- [ 0.559587] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
- [ 0.559612] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
- [ 0.559625] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
- [ 0.559788] ACPI: Enabled 10 GPEs in block 00 to 1F
- [ 0.563936] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
- [ 0.563940] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
- [ 0.563943] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
- [ 0.564162] PCI host bridge to bus 0000:00
- [ 0.564163] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
- [ 0.564164] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
- [ 0.564165] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
- [ 0.564166] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
- [ 0.564167] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
- [ 0.564168] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
- [ 0.564169] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff window]
- [ 0.564170] pci_bus 0000:00: root bus resource [bus 00-ff]
- [ 0.564177] pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000
- [ 0.564267] pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600
- [ 0.564352] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400
- [ 0.564365] pci 0000:00:09.0: enabling Extended Tags
- [ 0.564383] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
- [ 0.564446] pci 0000:00:0a.0: [1002:5a1d] type 01 class 0x060400
- [ 0.564460] pci 0000:00:0a.0: enabling Extended Tags
- [ 0.564476] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
- [ 0.564539] pci 0000:00:0b.0: [1002:5a1f] type 01 class 0x060400
- [ 0.564552] pci 0000:00:0b.0: enabling Extended Tags
- [ 0.564569] pci 0000:00:0b.0: PME# supported from D0 D3hot D3cold
- [ 0.564638] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
- [ 0.564652] pci 0000:00:11.0: reg 0x10: [io 0xf040-0xf047]
- [ 0.564659] pci 0000:00:11.0: reg 0x14: [io 0xf030-0xf033]
- [ 0.564665] pci 0000:00:11.0: reg 0x18: [io 0xf020-0xf027]
- [ 0.564671] pci 0000:00:11.0: reg 0x1c: [io 0xf010-0xf013]
- [ 0.564677] pci 0000:00:11.0: reg 0x20: [io 0xf000-0xf00f]
- [ 0.564683] pci 0000:00:11.0: reg 0x24: [mem 0xfe70b000-0xfe70b3ff]
- [ 0.564766] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
- [ 0.564778] pci 0000:00:12.0: reg 0x10: [mem 0xfe70a000-0xfe70afff]
- [ 0.564873] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
- [ 0.564887] pci 0000:00:12.2: reg 0x10: [mem 0xfe709000-0xfe7090ff]
- [ 0.564942] pci 0000:00:12.2: supports D1 D2
- [ 0.564943] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
- [ 0.565008] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
- [ 0.565020] pci 0000:00:13.0: reg 0x10: [mem 0xfe708000-0xfe708fff]
- [ 0.565157] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
- [ 0.565172] pci 0000:00:13.2: reg 0x10: [mem 0xfe707000-0xfe7070ff]
- [ 0.565227] pci 0000:00:13.2: supports D1 D2
- [ 0.565227] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
- [ 0.565296] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
- [ 0.565410] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
- [ 0.565427] pci 0000:00:14.2: reg 0x10: [mem 0xfe700000-0xfe703fff 64bit]
- [ 0.565474] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
- [ 0.565539] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
- [ 0.565652] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
- [ 0.565733] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
- [ 0.565745] pci 0000:00:14.5: reg 0x10: [mem 0xfe706000-0xfe706fff]
- [ 0.565840] pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
- [ 0.565866] pci 0000:00:15.0: enabling Extended Tags
- [ 0.565895] pci 0000:00:15.0: supports D1 D2
- [ 0.565964] pci 0000:00:15.1: [1002:43a1] type 01 class 0x060400
- [ 0.565990] pci 0000:00:15.1: enabling Extended Tags
- [ 0.566019] pci 0000:00:15.1: supports D1 D2
- [ 0.566087] pci 0000:00:15.2: [1002:43a2] type 01 class 0x060400
- [ 0.566113] pci 0000:00:15.2: enabling Extended Tags
- [ 0.566142] pci 0000:00:15.2: supports D1 D2
- [ 0.566210] pci 0000:00:15.3: [1002:43a3] type 01 class 0x060400
- [ 0.566236] pci 0000:00:15.3: enabling Extended Tags
- [ 0.566265] pci 0000:00:15.3: supports D1 D2
- [ 0.566333] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
- [ 0.566345] pci 0000:00:16.0: reg 0x10: [mem 0xfe705000-0xfe705fff]
- [ 0.566443] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
- [ 0.566457] pci 0000:00:16.2: reg 0x10: [mem 0xfe704000-0xfe7040ff]
- [ 0.566511] pci 0000:00:16.2: supports D1 D2
- [ 0.566512] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
- [ 0.566580] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
- [ 0.566634] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
- [ 0.566686] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
- [ 0.566738] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
- [ 0.566791] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
- [ 0.566879] pci 0000:01:00.0: [1b6f:7023] type 00 class 0x0c0330
- [ 0.566898] pci 0000:01:00.0: reg 0x10: [mem 0xfe600000-0xfe607fff 64bit]
- [ 0.566931] pci 0000:01:00.0: enabling Extended Tags
- [ 0.566967] pci 0000:01:00.0: supports D1 D2
- [ 0.566968] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.577166] pci 0000:00:09.0: PCI bridge to [bus 01]
- [ 0.577177] pci 0000:00:09.0: bridge window [mem 0xfe600000-0xfe6fffff]
- [ 0.577301] pci 0000:02:00.0: [1b4b:9172] type 00 class 0x010601
- [ 0.577325] pci 0000:02:00.0: reg 0x10: [io 0xe040-0xe047]
- [ 0.577335] pci 0000:02:00.0: reg 0x14: [io 0xe030-0xe033]
- [ 0.577345] pci 0000:02:00.0: reg 0x18: [io 0xe020-0xe027]
- [ 0.577355] pci 0000:02:00.0: reg 0x1c: [io 0xe010-0xe013]
- [ 0.577366] pci 0000:02:00.0: reg 0x20: [io 0xe000-0xe00f]
- [ 0.577372] pci 0000:02:00.0: reg 0x24: [mem 0xfe510000-0xfe5101ff]
- [ 0.577377] pci 0000:02:00.0: reg 0x30: [mem 0xfe500000-0xfe50ffff pref]
- [ 0.577397] pci 0000:02:00.0: Enabling fixed DMA alias to 00.1
- [ 0.577420] pci 0000:02:00.0: PME# supported from D3hot
- [ 0.589156] pci 0000:00:0a.0: PCI bridge to [bus 02]
- [ 0.589165] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff]
- [ 0.589171] pci 0000:00:0a.0: bridge window [mem 0xfe500000-0xfe5fffff]
- [ 0.589291] pci 0000:03:00.0: [10de:17c8] type 00 class 0x030000
- [ 0.589320] pci 0000:03:00.0: reg 0x10: [mem 0xfd000000-0xfdffffff]
- [ 0.589335] pci 0000:03:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
- [ 0.589350] pci 0000:03:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
- [ 0.589361] pci 0000:03:00.0: reg 0x24: [io 0xd000-0xd07f]
- [ 0.589372] pci 0000:03:00.0: reg 0x30: [mem 0xfe000000-0xfe07ffff pref]
- [ 0.589382] pci 0000:03:00.0: enabling Extended Tags
- [ 0.589513] pci 0000:03:00.1: [10de:0fb0] type 00 class 0x040300
- [ 0.589527] pci 0000:03:00.1: reg 0x10: [mem 0xfe080000-0xfe083fff]
- [ 0.589561] pci 0000:03:00.1: enabling Extended Tags
- [ 0.589644] pci 0000:00:0b.0: PCI bridge to [bus 03]
- [ 0.589646] pci 0000:00:0b.0: bridge window [io 0xd000-0xdfff]
- [ 0.589647] pci 0000:00:0b.0: bridge window [mem 0xfd000000-0xfe0fffff]
- [ 0.589650] pci 0000:00:0b.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
- [ 0.589657] pci_bus 0000:04: extended config space not accessible
- [ 0.589692] pci 0000:04:0e.0: [1106:3044] type 00 class 0x0c0010
- [ 0.589710] pci 0000:04:0e.0: reg 0x10: [mem 0xfe400000-0xfe4007ff]
- [ 0.589728] pci 0000:04:0e.0: reg 0x14: [io 0xc000-0xc07f]
- [ 0.589799] pci 0000:04:0e.0: supports D2
- [ 0.589800] pci 0000:04:0e.0: PME# supported from D2 D3hot D3cold
- [ 0.589851] pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode)
- [ 0.589853] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
- [ 0.589855] pci 0000:00:14.4: bridge window [mem 0xfe400000-0xfe4fffff]
- [ 0.589858] pci 0000:00:14.4: bridge window [io 0x0000-0x03af window] (subtractive decode)
- [ 0.589859] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode)
- [ 0.589860] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df window] (subtractive decode)
- [ 0.589860] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
- [ 0.589861] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
- [ 0.589862] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
- [ 0.589863] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff window] (subtractive decode)
- [ 0.589918] pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000
- [ 0.589942] pci 0000:05:00.0: reg 0x10: [io 0xb000-0xb0ff]
- [ 0.589965] pci 0000:05:00.0: reg 0x18: [mem 0xd2104000-0xd2104fff 64bit pref]
- [ 0.589979] pci 0000:05:00.0: reg 0x20: [mem 0xd2100000-0xd2103fff 64bit pref]
- [ 0.590059] pci 0000:05:00.0: supports D1 D2
- [ 0.590060] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.590160] pci 0000:00:15.0: PCI bridge to [bus 05]
- [ 0.590163] pci 0000:00:15.0: bridge window [io 0xb000-0xbfff]
- [ 0.590168] pci 0000:00:15.0: bridge window [mem 0xd2100000-0xd21fffff 64bit pref]
- [ 0.590210] pci 0000:06:00.0: [1b6f:7023] type 00 class 0x0c0330
- [ 0.590236] pci 0000:06:00.0: reg 0x10: [mem 0xfe300000-0xfe307fff 64bit]
- [ 0.590284] pci 0000:06:00.0: enabling Extended Tags
- [ 0.590334] pci 0000:06:00.0: supports D1 D2
- [ 0.590335] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.590408] pci 0000:00:15.1: PCI bridge to [bus 06]
- [ 0.590413] pci 0000:00:15.1: bridge window [mem 0xfe300000-0xfe3fffff]
- [ 0.590454] pci 0000:07:00.0: [1b4b:9172] type 00 class 0x010601
- [ 0.590471] pci 0000:07:00.0: reg 0x10: [io 0xa040-0xa047]
- [ 0.590479] pci 0000:07:00.0: reg 0x14: [io 0xa030-0xa033]
- [ 0.590486] pci 0000:07:00.0: reg 0x18: [io 0xa020-0xa027]
- [ 0.590494] pci 0000:07:00.0: reg 0x1c: [io 0xa010-0xa013]
- [ 0.590501] pci 0000:07:00.0: reg 0x20: [io 0xa000-0xa00f]
- [ 0.590509] pci 0000:07:00.0: reg 0x24: [mem 0xfe210000-0xfe2101ff]
- [ 0.590517] pci 0000:07:00.0: reg 0x30: [mem 0xfe200000-0xfe20ffff pref]
- [ 0.590527] pci 0000:07:00.0: Enabling fixed DMA alias to 00.1
- [ 0.590560] pci 0000:07:00.0: PME# supported from D3hot
- [ 0.590625] pci 0000:00:15.2: PCI bridge to [bus 07]
- [ 0.590628] pci 0000:00:15.2: bridge window [io 0xa000-0xafff]
- [ 0.590630] pci 0000:00:15.2: bridge window [mem 0xfe200000-0xfe2fffff]
- [ 0.590677] pci 0000:08:00.0: [8086:2723] type 00 class 0x028000
- [ 0.590710] pci 0000:08:00.0: reg 0x10: [mem 0xfe100000-0xfe103fff 64bit]
- [ 0.590832] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold
- [ 0.601169] pci 0000:00:15.3: PCI bridge to [bus 08]
- [ 0.601182] pci 0000:00:15.3: bridge window [mem 0xfe100000-0xfe1fffff]
- [ 0.602091] pci 0000:03:00.0: vgaarb: setting as boot VGA device
- [ 0.602091] pci 0000:03:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
- [ 0.602091] pci 0000:03:00.0: vgaarb: bridge control possible
- [ 0.602091] vgaarb: loaded
- [ 0.602091] pps_core: LinuxPPS API ver. 1 registered
- [ 0.602091] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
- [ 0.602091] PTP clock support registered
- [ 0.602091] EDAC MC: Ver: 3.0.0
- [ 0.602091] PCI: Using ACPI for IRQ routing
- [ 0.608269] PCI: pci_cache_line_size set to 64 bytes
- [ 0.608327] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
- [ 0.608328] e820: reserve RAM buffer [mem 0xbe47f000-0xbfffffff]
- [ 0.608328] e820: reserve RAM buffer [mem 0xbf158000-0xbfffffff]
- [ 0.608329] e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff]
- [ 0.608425] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
- [ 0.608425] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
- [ 0.610209] clocksource: Switched to clocksource tsc-early
- [ 0.618512] VFS: Disk quotas dquot_6.6.0
- [ 0.618655] AppArmor: AppArmor Filesystem Enabled
- [ 0.618671] pnp: PnP ACPI init
- [ 0.619169] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
- [ 0.619328] pnp 00:04: [dma 0 disabled]
- [ 0.619360] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
- [ 0.619378] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
- [ 0.619759] pnp: PnP ACPI: found 10 devices
- [ 0.625666] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
- [ 0.625703] pci 0000:00:09.0: PCI bridge to [bus 01]
- [ 0.625706] pci 0000:00:09.0: bridge window [mem 0xfe600000-0xfe6fffff]
- [ 0.625709] pci 0000:00:0a.0: PCI bridge to [bus 02]
- [ 0.625710] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff]
- [ 0.625712] pci 0000:00:0a.0: bridge window [mem 0xfe500000-0xfe5fffff]
- [ 0.625715] pci 0000:00:0b.0: PCI bridge to [bus 03]
- [ 0.625716] pci 0000:00:0b.0: bridge window [io 0xd000-0xdfff]
- [ 0.625717] pci 0000:00:0b.0: bridge window [mem 0xfd000000-0xfe0fffff]
- [ 0.625719] pci 0000:00:0b.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
- [ 0.625721] pci 0000:00:14.4: PCI bridge to [bus 04]
- [ 0.625723] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
- [ 0.625725] pci 0000:00:14.4: bridge window [mem 0xfe400000-0xfe4fffff]
- [ 0.625731] pci 0000:00:15.0: PCI bridge to [bus 05]
- [ 0.625732] pci 0000:00:15.0: bridge window [io 0xb000-0xbfff]
- [ 0.625736] pci 0000:00:15.0: bridge window [mem 0xd2100000-0xd21fffff 64bit pref]
- [ 0.625739] pci 0000:00:15.1: PCI bridge to [bus 06]
- [ 0.625742] pci 0000:00:15.1: bridge window [mem 0xfe300000-0xfe3fffff]
- [ 0.625746] pci 0000:00:15.2: PCI bridge to [bus 07]
- [ 0.625747] pci 0000:00:15.2: bridge window [io 0xa000-0xafff]
- [ 0.625750] pci 0000:00:15.2: bridge window [mem 0xfe200000-0xfe2fffff]
- [ 0.625754] pci 0000:00:15.3: PCI bridge to [bus 08]
- [ 0.625757] pci 0000:00:15.3: bridge window [mem 0xfe100000-0xfe1fffff]
- [ 0.625762] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
- [ 0.625763] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
- [ 0.625764] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
- [ 0.625765] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
- [ 0.625766] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
- [ 0.625766] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
- [ 0.625767] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff window]
- [ 0.625769] pci_bus 0000:01: resource 1 [mem 0xfe600000-0xfe6fffff]
- [ 0.625770] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
- [ 0.625770] pci_bus 0000:02: resource 1 [mem 0xfe500000-0xfe5fffff]
- [ 0.625771] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
- [ 0.625772] pci_bus 0000:03: resource 1 [mem 0xfd000000-0xfe0fffff]
- [ 0.625773] pci_bus 0000:03: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
- [ 0.625774] pci_bus 0000:04: resource 0 [io 0xc000-0xcfff]
- [ 0.625775] pci_bus 0000:04: resource 1 [mem 0xfe400000-0xfe4fffff]
- [ 0.625776] pci_bus 0000:04: resource 4 [io 0x0000-0x03af window]
- [ 0.625777] pci_bus 0000:04: resource 5 [io 0x03e0-0x0cf7 window]
- [ 0.625778] pci_bus 0000:04: resource 6 [io 0x03b0-0x03df window]
- [ 0.625778] pci_bus 0000:04: resource 7 [io 0x0d00-0xffff window]
- [ 0.625779] pci_bus 0000:04: resource 8 [mem 0x000a0000-0x000bffff window]
- [ 0.625780] pci_bus 0000:04: resource 9 [mem 0x000c0000-0x000dffff window]
- [ 0.625781] pci_bus 0000:04: resource 10 [mem 0xc0000000-0xffffffff window]
- [ 0.625782] pci_bus 0000:05: resource 0 [io 0xb000-0xbfff]
- [ 0.625783] pci_bus 0000:05: resource 2 [mem 0xd2100000-0xd21fffff 64bit pref]
- [ 0.625784] pci_bus 0000:06: resource 1 [mem 0xfe300000-0xfe3fffff]
- [ 0.625785] pci_bus 0000:07: resource 0 [io 0xa000-0xafff]
- [ 0.625786] pci_bus 0000:07: resource 1 [mem 0xfe200000-0xfe2fffff]
- [ 0.625787] pci_bus 0000:08: resource 1 [mem 0xfe100000-0xfe1fffff]
- [ 0.625843] NET: Registered protocol family 2
- [ 0.626827] NET: Registered protocol family 1
- [ 0.626833] NET: Registered protocol family 44
- [ 0.715903] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x6c1 took 86950 usecs
- [ 0.803896] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x6c1 took 85814 usecs
- [ 0.891897] pci 0000:00:14.5: quirk_usb_early_handoff+0x0/0x6c1 took 85814 usecs
- [ 0.979901] pci 0000:00:16.0: quirk_usb_early_handoff+0x0/0x6c1 took 85902 usecs
- [ 0.980128] pci 0000:03:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
- [ 0.980141] pci 0000:03:00.1: Linked as a consumer to 0000:03:00.0
- [ 0.980288] PCI: CLS 64 bytes, default 64
- [ 0.980321] Unpacking initramfs...
- [ 1.431666] random: fast init done
- [ 1.482934] Freeing initrd memory: 38252K
- [ 1.483484] iommu: Adding device 0000:00:00.0 to group 0
- [ 1.483647] iommu: Adding device 0000:00:09.0 to group 1
- [ 1.483741] iommu: Adding device 0000:00:0a.0 to group 2
- [ 1.483859] iommu: Adding device 0000:00:0b.0 to group 3
- [ 1.483962] iommu: Adding device 0000:00:11.0 to group 4
- [ 1.484065] iommu: Adding device 0000:00:12.0 to group 5
- [ 1.484081] iommu: Adding device 0000:00:12.2 to group 5
- [ 1.484168] iommu: Adding device 0000:00:13.0 to group 6
- [ 1.484181] iommu: Adding device 0000:00:13.2 to group 6
- [ 1.484263] iommu: Adding device 0000:00:14.0 to group 7
- [ 1.484347] iommu: Adding device 0000:00:14.2 to group 8
- [ 1.484424] iommu: Adding device 0000:00:14.3 to group 9
- [ 1.484502] iommu: Adding device 0000:00:14.4 to group 10
- [ 1.484578] iommu: Adding device 0000:00:14.5 to group 11
- [ 1.484673] iommu: Adding device 0000:00:15.0 to group 12
- [ 1.484689] iommu: Adding device 0000:00:15.1 to group 12
- [ 1.484703] iommu: Adding device 0000:00:15.2 to group 12
- [ 1.484717] iommu: Adding device 0000:00:15.3 to group 12
- [ 1.484803] iommu: Adding device 0000:00:16.0 to group 13
- [ 1.484818] iommu: Adding device 0000:00:16.2 to group 13
- [ 1.484896] iommu: Adding device 0000:01:00.0 to group 14
- [ 1.484975] iommu: Adding device 0000:02:00.0 to group 15
- [ 1.485069] iommu: Adding device 0000:03:00.0 to group 16
- [ 1.485090] iommu: Adding device 0000:03:00.1 to group 16
- [ 1.485101] iommu: Adding device 0000:04:0e.0 to group 10
- [ 1.485146] iommu: Adding device 0000:05:00.0 to group 12
- [ 1.485168] iommu: Adding device 0000:06:00.0 to group 12
- [ 1.485178] iommu: Adding device 0000:07:00.0 to group 12
- [ 1.485190] iommu: Adding device 0000:08:00.0 to group 12
- [ 1.533921] AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
- [ 1.533922] AMD-Vi: Interrupt remapping enabled
- [ 1.534055] AMD-Vi: Lazy IO/TLB flushing enabled
- [ 1.535561] LVT offset 1 assigned for vector 0x400
- [ 1.535569] LVT offset 1 assigned
- [ 1.535760] perf: AMD IBS detected (0x0000001f)
- [ 1.536417] workingset: timestamp_bits=40 max_order=22 bucket_order=0
- [ 1.537687] zbud: loaded
- [ 1.692375] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
- [ 1.692454] io scheduler noop registered
- [ 1.692455] io scheduler deadline registered
- [ 1.692486] io scheduler cfq registered (default)
- [ 1.692487] io scheduler mq-deadline registered
- [ 1.693177] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
- [ 1.693617] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- [ 1.714033] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
- [ 1.714386] Linux agpgart interface v0.103
- [ 1.714411] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
- [ 1.715277] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
- [ 1.715278] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
- [ 1.715419] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 1.715509] mousedev: PS/2 mouse device common for all mice
- [ 1.715546] rtc_cmos 00:05: RTC can wake from S4
- [ 1.715660] rtc_cmos 00:05: registered as rtc0
- [ 1.715671] rtc_cmos 00:05: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
- [ 1.715832] ledtrig-cpu: registered to indicate activity on CPUs
- [ 1.716224] NET: Registered protocol family 10
- [ 1.722826] Segment Routing with IPv6
- [ 1.722922] mip6: Mobile IPv6
- [ 1.722927] NET: Registered protocol family 17
- [ 1.723009] mpls_gso: MPLS GSO support
- [ 1.723353] mce: Using 6 MCE banks
- [ 1.723384] microcode: CPU0: patch_level=0x010000bf
- [ 1.723390] microcode: CPU1: patch_level=0x010000bf
- [ 1.723397] microcode: CPU2: patch_level=0x010000bf
- [ 1.723400] microcode: CPU3: patch_level=0x010000bf
- [ 1.723405] microcode: CPU4: patch_level=0x010000bf
- [ 1.723411] microcode: CPU5: patch_level=0x010000bf
- [ 1.723447] microcode: Microcode Update Driver: v2.2.
- [ 1.723456] sched_clock: Marking stable (1674868062, 48575070)->(1736539777, -13096645)
- [ 1.723628] registered taskstats version 1
- [ 1.723629] Loading compiled-in X.509 certificates
- [ 1.735932] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
- [ 1.759679] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
- [ 1.759694] Loaded X.509 cert 'Debian Secure Boot Signer: 00a7468def'
- [ 1.759712] zswap: loaded using pool lzo/zbud
- [ 2.017750] Freeing unused kernel image memory: 1588K
- [ 2.033249] Write protecting the kernel read-only data: 16384k
- [ 2.034925] Freeing unused kernel image memory: 2028K
- [ 2.035238] Freeing unused kernel image memory: 780K
- [ 2.042408] x86/mm: Checked W+X mappings: passed, no W+X pages found.
- [ 2.042410] Run /init as init process
- [ 2.089712] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
- [ 2.089735] ACPI: Power Button [PWRB]
- [ 2.089784] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
- [ 2.089790] ACPI: Power Button [PWRF]
- [ 2.101620] SCSI subsystem initialized
- [ 2.103770] ACPI: bus type USB registered
- [ 2.103787] usbcore: registered new interface driver usbfs
- [ 2.103794] usbcore: registered new interface driver hub
- [ 2.103828] usbcore: registered new device driver usb
- [ 2.109745] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 2.110574] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
- [ 2.110580] piix4_smbus 0000:00:14.0: Using register 0x2c for SMBus port selection
- [ 2.110678] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
- [ 2.111186] ehci-pci: EHCI PCI platform driver
- [ 2.114244] QUIRK: Enable AMD PLL fix
- [ 2.114272] ehci-pci 0000:00:12.2: EHCI Host Controller
- [ 2.114278] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
- [ 2.114282] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
- [ 2.114289] ehci-pci 0000:00:12.2: debug port 1
- [ 2.114339] ehci-pci 0000:00:12.2: irq 17, io mem 0xfe709000
- [ 2.114546] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 2.127495] r8169 0000:05:00.0: can't disable ASPM; OS doesn't have ASPM control
- [ 2.129582] libata version 3.00 loaded.
- [ 2.133133] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
- [ 2.133203] libphy: r8169: probed
- [ 2.133642] r8169 0000:05:00.0 eth0: RTL8168evl/8111evl, fc:aa:14:2f:ba:58, XID 2c900800, IRQ 29
- [ 2.133643] r8169 0000:05:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
- [ 2.133678] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
- [ 2.133680] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 2.133681] usb usb1: Product: EHCI Host Controller
- [ 2.133681] usb usb1: Manufacturer: Linux 4.19.0-9-amd64 ehci_hcd
- [ 2.133682] usb usb1: SerialNumber: 0000:00:12.2
- [ 2.133794] hub 1-0:1.0: USB hub found
- [ 2.133801] hub 1-0:1.0: 5 ports detected
- [ 2.133940] xhci_hcd 0000:01:00.0: xHCI Host Controller
- [ 2.133945] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
- [ 2.134014] xhci_hcd 0000:01:00.0: hcc params 0x040050af hci version 0x100 quirks 0x0000000000080490
- [ 2.134156] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
- [ 2.134157] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 2.134158] usb usb2: Product: xHCI Host Controller
- [ 2.134159] usb usb2: Manufacturer: Linux 4.19.0-9-amd64 xhci-hcd
- [ 2.134159] usb usb2: SerialNumber: 0000:01:00.0
- [ 2.134240] hub 2-0:1.0: USB hub found
- [ 2.134248] hub 2-0:1.0: 2 ports detected
- [ 2.134344] xhci_hcd 0000:01:00.0: xHCI Host Controller
- [ 2.134346] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 3
- [ 2.134349] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed
- [ 2.134365] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
- [ 2.134386] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
- [ 2.134387] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 2.134388] usb usb3: Product: xHCI Host Controller
- [ 2.134389] usb usb3: Manufacturer: Linux 4.19.0-9-amd64 xhci-hcd
- [ 2.134390] usb usb3: SerialNumber: 0000:01:00.0
- [ 2.134458] hub 3-0:1.0: USB hub found
- [ 2.134465] hub 3-0:1.0: 2 ports detected
- [ 2.134655] ehci-pci 0000:00:13.2: EHCI Host Controller
- [ 2.134659] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 4
- [ 2.134663] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
- [ 2.134670] ehci-pci 0000:00:13.2: debug port 1
- [ 2.134703] ehci-pci 0000:00:13.2: irq 17, io mem 0xfe707000
- [ 2.134828] ahci 0000:00:11.0: version 3.0
- [ 2.134967] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
- [ 2.134969] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part sxs
- [ 2.135746] scsi host0: ahci
- [ 2.135917] scsi host1: ahci
- [ 2.136045] scsi host2: ahci
- [ 2.136178] scsi host3: ahci
- [ 2.137257] scsi host4: ahci
- [ 2.137399] r8169 0000:05:00.0 enp5s0: renamed from eth0
- [ 2.137528] scsi host5: ahci
- [ 2.137593] ata1: SATA max UDMA/133 abar m1024@0xfe70b000 port 0xfe70b100 irq 19
- [ 2.137595] ata2: SATA max UDMA/133 abar m1024@0xfe70b000 port 0xfe70b180 irq 19
- [ 2.137597] ata3: SATA max UDMA/133 abar m1024@0xfe70b000 port 0xfe70b200 irq 19
- [ 2.137598] ata4: SATA max UDMA/133 abar m1024@0xfe70b000 port 0xfe70b280 irq 19
- [ 2.137599] ata5: SATA max UDMA/133 abar m1024@0xfe70b000 port 0xfe70b300 irq 19
- [ 2.137601] ata6: SATA max UDMA/133 abar m1024@0xfe70b000 port 0xfe70b380 irq 19
- [ 2.137802] ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
- [ 2.137804] ahci 0000:02:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
- [ 2.138158] scsi host6: ahci
- [ 2.138309] scsi host7: ahci
- [ 2.138382] ata7: SATA max UDMA/133 abar m512@0xfe510000 port 0xfe510100 irq 32
- [ 2.138384] ata8: SATA max UDMA/133 abar m512@0xfe510000 port 0xfe510180 irq 32
- [ 2.138560] ahci 0000:07:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
- [ 2.138562] ahci 0000:07:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
- [ 2.138957] scsi host8: ahci
- [ 2.139083] scsi host9: ahci
- [ 2.139178] ata9: SATA max UDMA/133 abar m512@0xfe210000 port 0xfe210100 irq 33
- [ 2.139180] ata10: SATA max UDMA/133 abar m512@0xfe210000 port 0xfe210180 irq 33
- [ 2.153183] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
- [ 2.153233] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
- [ 2.153235] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 2.153236] usb usb4: Product: EHCI Host Controller
- [ 2.153237] usb usb4: Manufacturer: Linux 4.19.0-9-amd64 ehci_hcd
- [ 2.153237] usb usb4: SerialNumber: 0000:00:13.2
- [ 2.153396] hub 4-0:1.0: USB hub found
- [ 2.153401] hub 4-0:1.0: 5 ports detected
- [ 2.153538] xhci_hcd 0000:06:00.0: xHCI Host Controller
- [ 2.153542] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 5
- [ 2.153624] xhci_hcd 0000:06:00.0: hcc params 0x040050af hci version 0x100 quirks 0x0000000000080490
- [ 2.153783] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
- [ 2.153784] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 2.153785] usb usb5: Product: xHCI Host Controller
- [ 2.153786] usb usb5: Manufacturer: Linux 4.19.0-9-amd64 xhci-hcd
- [ 2.153786] usb usb5: SerialNumber: 0000:06:00.0
- [ 2.153961] hub 5-0:1.0: USB hub found
- [ 2.153968] hub 5-0:1.0: 2 ports detected
- [ 2.154069] xhci_hcd 0000:06:00.0: xHCI Host Controller
- [ 2.154071] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 6
- [ 2.154074] xhci_hcd 0000:06:00.0: Host supports USB 3.0 SuperSpeed
- [ 2.154086] ehci-pci 0000:00:16.2: EHCI Host Controller
- [ 2.154099] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
- [ 2.154115] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
- [ 2.154116] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 2.154117] usb usb6: Product: xHCI Host Controller
- [ 2.154118] usb usb6: Manufacturer: Linux 4.19.0-9-amd64 xhci-hcd
- [ 2.154118] usb usb6: SerialNumber: 0000:06:00.0
- [ 2.154198] hub 6-0:1.0: USB hub found
- [ 2.154207] hub 6-0:1.0: 2 ports detected
- [ 2.154297] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 7
- [ 2.154299] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
- [ 2.154307] ehci-pci 0000:00:16.2: debug port 1
- [ 2.154340] ehci-pci 0000:00:16.2: irq 17, io mem 0xfe704000
- [ 2.173173] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
- [ 2.173215] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
- [ 2.173217] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 2.173218] usb usb7: Product: EHCI Host Controller
- [ 2.173218] usb usb7: Manufacturer: Linux 4.19.0-9-amd64 ehci_hcd
- [ 2.173219] usb usb7: SerialNumber: 0000:00:16.2
- [ 2.173373] hub 7-0:1.0: USB hub found
- [ 2.173378] hub 7-0:1.0: 4 ports detected
- [ 2.174553] ohci-pci: OHCI PCI platform driver
- [ 2.174998] ohci-pci 0000:00:12.0: OHCI PCI host controller
- [ 2.175008] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 8
- [ 2.175044] ohci-pci 0000:00:12.0: irq 18, io mem 0xfe70a000
- [ 2.195270] MXM: GUID detected in BIOS
- [ 2.195627] nouveau 0000:03:00.0: NVIDIA GM200 (120080a1)
- [ 2.225717] firewire_ohci 0000:04:0e.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
- [ 2.266327] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
- [ 2.266328] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 2.266329] usb usb8: Product: OHCI PCI host controller
- [ 2.266329] usb usb8: Manufacturer: Linux 4.19.0-9-amd64 ohci_hcd
- [ 2.266330] usb usb8: SerialNumber: 0000:00:12.0
- [ 2.296943] nouveau 0000:03:00.0: bios: version 84.00.36.00.4c
- [ 2.297000] hub 8-0:1.0: USB hub found
- [ 2.297006] hub 8-0:1.0: 5 ports detected
- [ 2.297586] nouveau 0000:03:00.0: firmware: direct-loading firmware nvidia/gm200/gr/sw_nonctx.bin
- [ 2.297603] nouveau 0000:03:00.0: firmware: direct-loading firmware nvidia/gm200/gr/sw_ctx.bin
- [ 2.297627] nouveau 0000:03:00.0: firmware: direct-loading firmware nvidia/gm200/gr/sw_bundle_init.bin
- [ 2.297655] nouveau 0000:03:00.0: firmware: direct-loading firmware nvidia/gm200/gr/sw_method_init.bin
- [ 2.297922] ohci-pci 0000:00:13.0: OHCI PCI host controller
- [ 2.297930] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 9
- [ 2.297954] ohci-pci 0000:00:13.0: irq 18, io mem 0xfe708000
- [ 2.298270] nouveau 0000:03:00.0: fb: 6144 MiB GDDR5
- [ 2.298297] nouveau 0000:03:00.0: bus: MMIO write of 80000136 FAULT at 10eb14 [ IBUS ]
- [ 2.363606] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
- [ 2.363607] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 2.363608] usb usb9: Product: OHCI PCI host controller
- [ 2.363608] usb usb9: Manufacturer: Linux 4.19.0-9-amd64 ohci_hcd
- [ 2.363609] usb usb9: SerialNumber: 0000:00:13.0
- [ 2.364775] hub 9-0:1.0: USB hub found
- [ 2.364781] hub 9-0:1.0: 5 ports detected
- [ 2.364899] [TTM] Zone kernel: Available graphics memory: 8234854 kiB
- [ 2.364900] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
- [ 2.364901] [TTM] Initializing pool allocator
- [ 2.364904] [TTM] Initializing DMA pool allocator
- [ 2.364916] nouveau 0000:03:00.0: DRM: VRAM: 6144 MiB
- [ 2.364917] nouveau 0000:03:00.0: DRM: GART: 1048576 MiB
- [ 2.364920] nouveau 0000:03:00.0: DRM: TMDS table version 2.0
- [ 2.364921] nouveau 0000:03:00.0: DRM: DCB version 4.1
- [ 2.364922] nouveau 0000:03:00.0: DRM: DCB outp 00: 01000f02 00020030
- [ 2.364924] nouveau 0000:03:00.0: DRM: DCB outp 01: 02000f00 00000000
- [ 2.364925] nouveau 0000:03:00.0: DRM: DCB outp 02: 04812f96 04400020
- [ 2.364926] nouveau 0000:03:00.0: DRM: DCB outp 03: 04012f92 00020020
- [ 2.364927] nouveau 0000:03:00.0: DRM: DCB outp 04: 04821f86 04400010
- [ 2.364928] nouveau 0000:03:00.0: DRM: DCB outp 05: 04021f82 00020010
- [ 2.364929] nouveau 0000:03:00.0: DRM: DCB outp 07: 02033f62 00020010
- [ 2.364930] nouveau 0000:03:00.0: DRM: DCB outp 08: 02844f76 04400020
- [ 2.364931] nouveau 0000:03:00.0: DRM: DCB outp 09: 02044f72 00020020
- [ 2.364932] nouveau 0000:03:00.0: DRM: DCB outp 10: 01d55ff8 00000000
- [ 2.364933] nouveau 0000:03:00.0: DRM: DCB conn 00: 00001030
- [ 2.364934] nouveau 0000:03:00.0: DRM: DCB conn 01: 01000146
- [ 2.364934] nouveau 0000:03:00.0: DRM: DCB conn 02: 02000246
- [ 2.364935] nouveau 0000:03:00.0: DRM: DCB conn 03: 00010361
- [ 2.364936] nouveau 0000:03:00.0: DRM: DCB conn 04: 00020446
- [ 2.364937] nouveau 0000:03:00.0: DRM: DCB conn 05: 00000570
- [ 2.366227] ohci-pci 0000:00:14.5: OHCI PCI host controller
- [ 2.366233] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 10
- [ 2.366250] ohci-pci 0000:00:14.5: irq 18, io mem 0xfe706000
- [ 2.429251] usb usb10: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
- [ 2.429252] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 2.429253] usb usb10: Product: OHCI PCI host controller
- [ 2.429254] usb usb10: Manufacturer: Linux 4.19.0-9-amd64 ohci_hcd
- [ 2.429255] usb usb10: SerialNumber: 0000:00:14.5
- [ 2.429366] hub 10-0:1.0: USB hub found
- [ 2.429372] hub 10-0:1.0: 2 ports detected
- [ 2.429600] ohci-pci 0000:00:16.0: OHCI PCI host controller
- [ 2.429605] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 11
- [ 2.429628] ohci-pci 0000:00:16.0: irq 18, io mem 0xfe705000
- [ 2.435579] nouveau 0000:03:00.0: DRM: failed to create encoder 1/8/0: -19
- [ 2.435585] nouveau 0000:03:00.0: DRM: Virtual-1 has no encoders, removing
- [ 2.435656] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
- [ 2.435656] [drm] Driver supports precise vblank timestamp query.
- [ 2.493249] usb usb11: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
- [ 2.493250] usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 2.493251] usb usb11: Product: OHCI PCI host controller
- [ 2.493252] usb usb11: Manufacturer: Linux 4.19.0-9-amd64 ohci_hcd
- [ 2.493253] usb usb11: SerialNumber: 0000:00:16.0
- [ 2.493363] hub 11-0:1.0: USB hub found
- [ 2.493369] hub 11-0:1.0: 4 ports detected
- [ 2.544941] usb 2-1: new high-speed USB device number 2 using xhci_hcd
- [ 2.565142] tsc: Refined TSC clocksource calibration: 3315.115 MHz
- [ 2.565160] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2fc912f2300, max_idle_ns: 440795334375 ns
- [ 2.577142] clocksource: Switched to clocksource tsc
- [ 2.614219] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32), AA
- [ 2.614230] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32), AA
- [ 2.614267] ata6.00: configured for UDMA/100
- [ 2.614313] ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32), AA
- [ 2.614346] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32), AA
- [ 2.614352] ata5.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32), AA
- [ 2.615345] ata3.00: configured for UDMA/133
- [ 2.615385] ata2.00: configured for UDMA/133
- [ 2.615436] ata4.00: configured for UDMA/133
- [ 2.615446] ata5.00: configured for UDMA/133
- [ 2.615490] ata1.00: configured for UDMA/133
- [ 2.615653] scsi 0:0:0:0: Direct-Access ATA Hitachi HDP72505 A5CA PQ: 0 ANSI: 5
- [ 2.615978] scsi 1:0:0:0: Direct-Access ATA Hitachi HDP72505 A5CA PQ: 0 ANSI: 5
- [ 2.618634] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
- [ 2.618639] sd 0:0:0:0: [sda] Write Protect is off
- [ 2.618640] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 2.618648] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 2.618670] sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/466 GiB)
- [ 2.618675] sd 1:0:0:0: [sdb] Write Protect is off
- [ 2.618677] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
- [ 2.618683] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 2.625713] scsi 2:0:0:0: Direct-Access ATA Hitachi HDP72505 A5CA PQ: 0 ANSI: 5
- [ 2.625969] sd 2:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/466 GiB)
- [ 2.625973] sd 2:0:0:0: [sdc] Write Protect is off
- [ 2.625974] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
- [ 2.625985] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 2.626231] scsi 3:0:0:0: Direct-Access ATA Hitachi HDP72505 A5CA PQ: 0 ANSI: 5
- [ 2.626365] sd 3:0:0:0: [sdd] 976773168 512-byte logical blocks: (500 GB/466 GiB)
- [ 2.626369] sd 3:0:0:0: [sdd] Write Protect is off
- [ 2.626370] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
- [ 2.626376] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 2.626616] scsi 4:0:0:0: Direct-Access ATA Hitachi HDP72505 A5CA PQ: 0 ANSI: 5
- [ 2.626737] sd 4:0:0:0: [sde] 976773168 512-byte logical blocks: (500 GB/466 GiB)
- [ 2.626742] sd 4:0:0:0: [sde] Write Protect is off
- [ 2.626743] sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
- [ 2.626749] sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 2.627855] scsi 5:0:0:0: CD-ROM ATAPI iHAS524 A BL2J PQ: 0 ANSI: 5
- [ 2.657652] sda: sda1 < sda5 > sda2
- [ 2.658003] sd 0:0:0:0: [sda] Attached SCSI removable disk
- [ 2.663730] sdb: sdb1 < sdb5 > sdb2
- [ 2.664061] sd 1:0:0:0: [sdb] Attached SCSI removable disk
- [ 2.670391] sdc: sdc1 < sdc5 > sdc2
- [ 2.670581] sdd: sdd1 < sdd5 > sdd2
- [ 2.670773] sd 2:0:0:0: [sdc] Attached SCSI removable disk
- [ 2.670898] sd 3:0:0:0: [sdd] Attached SCSI removable disk
- [ 2.674327] sde: sde1 < sde5 > sde2
- [ 2.674663] sd 4:0:0:0: [sde] Attached SCSI removable disk
- [ 2.779626] sr 5:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
- [ 2.779628] cdrom: Uniform CD-ROM driver Revision: 3.20
- [ 2.779876] sr 5:0:0:0: Attached scsi CD-ROM sr0
- [ 2.801525] nouveau 0000:03:00.0: firmware: direct-loading firmware nvidia/gm200/gr/fecs_bl.bin
- [ 2.801548] nouveau 0000:03:00.0: firmware: direct-loading firmware nvidia/gm200/gr/fecs_inst.bin
- [ 2.801571] nouveau 0000:03:00.0: firmware: direct-loading firmware nvidia/gm200/gr/fecs_data.bin
- [ 2.801580] nouveau 0000:03:00.0: firmware: direct-loading firmware nvidia/gm200/gr/fecs_sig.bin
- [ 2.801604] nouveau 0000:03:00.0: firmware: direct-loading firmware nvidia/gm200/gr/gpccs_bl.bin
- [ 2.801618] nouveau 0000:03:00.0: firmware: direct-loading firmware nvidia/gm200/gr/gpccs_inst.bin
- [ 2.801629] nouveau 0000:03:00.0: firmware: direct-loading firmware nvidia/gm200/gr/gpccs_data.bin
- [ 2.801639] nouveau 0000:03:00.0: firmware: direct-loading firmware nvidia/gm200/gr/gpccs_sig.bin
- [ 2.801728] nouveau 0000:03:00.0: firmware: direct-loading firmware nvidia/gm200/acr/ucode_load.bin
- [ 2.801772] nouveau 0000:03:00.0: firmware: direct-loading firmware nvidia/gm200/acr/ucode_unload.bin
- [ 2.801801] nouveau 0000:03:00.0: firmware: direct-loading firmware nvidia/gm200/acr/bl.bin
- [ 2.806340] usb 2-1: New USB device found, idVendor=2109, idProduct=2811, bcdDevice=85.70
- [ 2.806341] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
- [ 2.806342] usb 2-1: Product: USB 2.0 HUB
- [ 2.807139] hub 2-1:1.0: USB hub found
- [ 2.810579] hub 2-1:1.0: 4 ports detected
- [ 2.946096] nouveau 0000:03:00.0: DRM: allocated 2560x1600 fb: 0xa0000, bo (____ptrval____)
- [ 2.980357] fbcon: nouveaufb (fb0) is primary device
- [ 3.029165] usb 3-1: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
- [ 3.105139] raid6: sse2x1 gen() 4625 MB/s
- [ 3.173116] raid6: sse2x1 xor() 4873 MB/s
- [ 3.175756] usb 3-1: New USB device found, idVendor=2109, idProduct=8110, bcdDevice=85.71
- [ 3.175757] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 3.175758] usb 3-1: Product: USB 3.0 HUB
- [ 3.175759] usb 3-1: Manufacturer: VLI Labs, Inc.
- [ 3.238427] hub 3-1:1.0: USB hub found
- [ 3.238580] hub 3-1:1.0: 4 ports detected
- [ 3.238624] firewire_core 0000:04:0e.0: created device fw0: GUID 0035d474d7c58b00, S400
- [ 3.241136] raid6: sse2x2 gen() 7250 MB/s
- [ 3.290924] Console: switching to colour frame buffer device 240x67
- [ 3.291314] nouveau 0000:03:00.0: fb0: nouveaufb frame buffer device
- [ 3.309135] raid6: sse2x2 xor() 8282 MB/s
- [ 3.377163] raid6: sse2x4 gen() 8966 MB/s
- [ 3.393167] usb 9-2: new full-speed USB device number 2 using ohci-pci
- [ 3.445162] raid6: sse2x4 xor() 3916 MB/s
- [ 3.445163] raid6: using algorithm sse2x4 gen() 8966 MB/s
- [ 3.445164] raid6: .... xor() 3916 MB/s, rmw enabled
- [ 3.445165] raid6: using intx1 recovery algorithm
- [ 3.446097] xor: measuring software checksum speed
- [ 3.485145] prefetch64-sse: 14394.000 MB/sec
- [ 3.509171] usb 4-4: new high-speed USB device number 3 using ehci-pci
- [ 3.525130] generic_sse: 13717.000 MB/sec
- [ 3.525135] xor: using function: prefetch64-sse (14394.000 MB/sec)
- [ 3.525823] async_tx: api initialized (async)
- [ 3.534269] md/raid:md0: device sda2 operational as raid disk 0
- [ 3.534270] md/raid:md0: device sdb2 operational as raid disk 1
- [ 3.534271] md/raid:md0: device sde2 operational as raid disk 4
- [ 3.534272] md/raid:md0: device sdc2 operational as raid disk 2
- [ 3.534272] md/raid:md0: device sdd2 operational as raid disk 3
- [ 3.534728] md/raid:md0: raid level 5 active with 5 out of 5 devices, algorithm 2
- [ 3.534913] random: crng init done
- [ 3.549401] [drm] Initialized nouveau 1.3.1 20120801 for 0000:03:00.0 on minor 0
- [ 3.568947] md0: detected capacity change from 0 to 1999873507328
- [ 3.604049] usb 9-2: New USB device found, idVendor=0c4b, idProduct=0501, bcdDevice= 0.01
- [ 3.604055] usb 9-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 3.604060] usb 9-2: Product: cyberJack RFID komfort
- [ 3.604063] usb 9-2: Manufacturer: REINER SCT
- [ 3.604066] usb 9-2: SerialNumber: 8063573163
- [ 3.667127] usb 4-4: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=32.98
- [ 3.667133] usb 4-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
- [ 3.667136] usb 4-4: Product: USB2.0 Hub
- [ 3.667729] hub 4-4:1.0: USB hub found
- [ 3.668121] hub 4-4:1.0: 4 ports detected
- [ 3.868201] Btrfs loaded, crc32c=crc32c-generic
- [ 3.969184] usb 9-5: new low-speed USB device number 3 using ohci-pci
- [ 3.971969] BTRFS: device label root devid 1 transid 10450 /dev/md0
- [ 3.987672] PM: Image not found (code -22)
- [ 4.003287] BTRFS info (device md0): disk space caching is enabled
- [ 4.003288] BTRFS info (device md0): has skinny extents
- [ 4.170027] usb 9-5: New USB device found, idVendor=046d, idProduct=c404, bcdDevice= 2.20
- [ 4.170034] usb 9-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 4.170038] usb 9-5: Product: Trackball
- [ 4.170042] usb 9-5: Manufacturer: Logitech
- [ 4.517159] usb 4-4.2: new full-speed USB device number 5 using ehci-pci
- [ 4.628750] usb 4-4.2: New USB device found, idVendor=0665, idProduct=6000, bcdDevice= 0.97
- [ 4.628756] usb 4-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 4.628760] usb 4-4.2: Product: Gaming keyboard
- [ 4.628763] usb 4-4.2: Manufacturer: EST
- [ 5.140847] systemd[1]: Inserted module 'autofs4'
- [ 5.225894] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
- [ 5.245300] systemd[1]: Detected architecture x86-64.
- [ 5.255323] systemd[1]: Set hostname to <PX6-330>.
- [ 5.790130] systemd[1]: Created slice system-getty.slice.
- [ 5.790274] systemd[1]: Listening on udev Control Socket.
- [ 5.792454] systemd[1]: Listening on Journal Socket.
- [ 5.793102] systemd[1]: Starting Create list of required static device nodes for the current kernel...
- [ 5.793901] systemd[1]: Mounting Huge Pages File System...
- [ 5.794175] systemd[1]: Created slice User and Session Slice.
- [ 5.794195] systemd[1]: Reached target Slices.
- [ 5.895902] BTRFS info (device md0): disk space caching is enabled
- [ 5.980270] systemd-journald[340]: Received request to flush runtime journal from PID 1
- [ 5.983767] lp: driver loaded but no devices found
- [ 5.996149] ppdev: user-space parallel port driver
- [ 6.355030] audit: type=1400 audit(1589736426.088:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/haveged" pid=381 comm="apparmor_parser"
- [ 6.355512] audit: type=1400 audit(1589736426.088:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=380 comm="apparmor_parser"
- [ 6.355516] audit: type=1400 audit(1589736426.088:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=380 comm="apparmor_parser"
- [ 6.355752] audit: type=1400 audit(1589736426.088:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=382 comm="apparmor_parser"
- [ 6.355756] audit: type=1400 audit(1589736426.088:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=382 comm="apparmor_parser"
- [ 6.355758] audit: type=1400 audit(1589736426.088:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=382 comm="apparmor_parser"
- [ 6.370076] audit: type=1400 audit(1589736426.108:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=385 comm="apparmor_parser"
- [ 6.370439] audit: type=1400 audit(1589736426.108:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=388 comm="apparmor_parser"
- [ 6.376397] audit: type=1400 audit(1589736426.112:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/mysqld-akonadi" pid=384 comm="apparmor_parser"
- [ 6.376410] audit: type=1400 audit(1589736426.112:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/mysqld-akonadi///usr/sbin/mysqld" pid=384 comm="apparmor_parser"
- [ 6.774860] acpi_cpufreq: overriding BIOS provided _PSD data
- [ 6.780131] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
- [ 6.780234] sp5100-tco sp5100-tco: Using 0xfed80b00 for watchdog MMIO address
- [ 6.782996] sp5100-tco sp5100-tco: initialized. heartbeat=60 sec (nowayout=0)
- [ 6.791349] input: PC Speaker as /devices/platform/pcspkr/input/input3
- [ 6.822818] sd 0:0:0:0: Attached scsi generic sg0 type 0
- [ 6.823215] sd 1:0:0:0: Attached scsi generic sg1 type 0
- [ 6.823254] sd 2:0:0:0: Attached scsi generic sg2 type 0
- [ 6.823281] sd 3:0:0:0: Attached scsi generic sg3 type 0
- [ 6.823323] sd 4:0:0:0: Attached scsi generic sg4 type 0
- [ 6.823355] sr 5:0:0:0: Attached scsi generic sg5 type 5
- [ 7.098544] hidraw: raw HID events driver (C) Jiri Kosina
- [ 7.190782] usbcore: registered new interface driver usbhid
- [ 7.190783] usbhid: USB HID core driver
- [ 7.195321] kvm: Nested Virtualization enabled
- [ 7.195324] kvm: Nested Paging enabled
- [ 7.218827] MCE: In-kernel MCE decoding enabled.
- [ 7.263130] EDAC amd64: Node 0: DRAM ECC disabled.
- [ 7.263135] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
- Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
- (Note that use of the override may cause unknown side effects.)
- [ 7.302083] EDAC amd64: Node 0: DRAM ECC disabled.
- [ 7.302086] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
- Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
- (Note that use of the override may cause unknown side effects.)
- [ 7.302100] input: Logitech Trackball as /devices/pci0000:00/0000:00:13.0/usb9/9-5/9-5:1.0/0003:046D:C404.0001/input/input4
- [ 7.304945] hid-generic 0003:046D:C404.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech Trackball] on usb-0000:00:13.0-5/input0
- [ 7.305218] input: EST Gaming keyboard as /devices/pci0000:00/0000:00:13.2/usb4/4-4/4-4.2/4-4.2:1.0/0003:0665:6000.0002/input/input5
- [ 7.346474] EDAC amd64: Node 0: DRAM ECC disabled.
- [ 7.346480] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
- Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
- (Note that use of the override may cause unknown side effects.)
- [ 7.360849] snd_hda_intel 0000:03:00.1: Disabling MSI
- [ 7.360864] snd_hda_intel 0000:03:00.1: Handle vga_switcheroo audio client
- [ 7.369417] hid-generic 0003:0665:6000.0002: input,hidraw1: USB HID v1.11 Keyboard [EST Gaming keyboard] on usb-0000:00:13.2-4.2/input0
- [ 7.370139] input: EST Gaming keyboard as /devices/pci0000:00/0000:00:13.2/usb4/4-4/4-4.2/4-4.2:1.1/0003:0665:6000.0003/input/input6
- [ 7.410085] EDAC amd64: Node 0: DRAM ECC disabled.
- [ 7.410089] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
- Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
- (Note that use of the override may cause unknown side effects.)
- [ 7.429466] hid-generic 0003:0665:6000.0003: input,hidraw2: USB HID v1.11 Device [EST Gaming keyboard] on usb-0000:00:13.2-4.2/input1
- [ 7.429971] input: EST Gaming keyboard as /devices/pci0000:00/0000:00:13.2/usb4/4-4/4-4.2/4-4.2:1.2/0003:0665:6000.0004/input/input7
- [ 7.458411] EDAC amd64: Node 0: DRAM ECC disabled.
- [ 7.458417] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
- Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
- (Note that use of the override may cause unknown side effects.)
- [ 7.494796] hid-generic 0003:0665:6000.0004: input,hidraw3: USB HID v1.11 Keyboard [EST Gaming keyboard] on usb-0000:00:13.2-4.2/input2
- [ 7.506457] EDAC amd64: Node 0: DRAM ECC disabled.
- [ 7.506462] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
- Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
- (Note that use of the override may cause unknown side effects.)
- [ 7.539372] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC889: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
- [ 7.539376] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
- [ 7.539378] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
- [ 7.539380] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
- [ 7.539382] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x1e
- [ 7.539384] snd_hda_codec_realtek hdaudioC0D0: inputs:
- [ 7.539386] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
- [ 7.539388] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
- [ 7.539390] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
- [ 7.559933] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
- [ 7.560111] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
- [ 7.560268] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
- [ 7.560429] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
- [ 7.560579] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
- [ 7.560728] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input13
- [ 7.560892] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input14
- [ 7.561043] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input15
- [ 7.577387] Adding 1020k swap on /dev/sdc5. Priority:-2 extents:1 across:1020k FS
- [ 7.577512] Adding 1020k swap on /dev/sde5. Priority:-3 extents:1 across:1020k FS
- [ 7.587619] Adding 1020k swap on /dev/sdb5. Priority:-4 extents:1 across:1020k FS
- [ 7.649546] Adding 1020k swap on /dev/sdd5. Priority:-5 extents:1 across:1020k FS
- [ 7.649772] Adding 1020k swap on /dev/sda5. Priority:-6 extents:1 across:1020k FS
- [ 9.211208] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready
- [ 9.232417] r8169 0000:05:00.0: firmware: direct-loading firmware rtl_nic/rtl8168e-3.fw
- [ 9.232700] RTL8211E Gigabit Ethernet r8169-500:00: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=r8169-500:00, irq=IGNORE)
- [ 9.391895] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:0b.0/0000:03:00.1/sound/card1/input16
- [ 9.392116] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:0b.0/0000:03:00.1/sound/card1/input17
- [ 9.392327] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:0b.0/0000:03:00.1/sound/card1/input18
- [ 9.395492] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:0b.0/0000:03:00.1/sound/card1/input19
- [ 9.443290] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready
- lspci -k
- 00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD9x0/RX980 Host Bridge (rev 02)
- Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] RD9x0/RX980 Host Bridge
- 00:00.2 IOMMU: Advanced Micro Devices, Inc. [AMD/ATI] RD890S/RD990 I/O Memory Management Unit (IOMMU)
- Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] RD890S/RD990 I/O Memory Management Unit (IOMMU)
- 00:09.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890/RD9x0/RX980 PCI to PCI bridge (PCI Express GPP Port 4)
- Kernel driver in use: pcieport
- 00:0a.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890/RD9x0/RX980 PCI to PCI bridge (PCI Express GPP Port 5)
- Kernel driver in use: pcieport
- 00:0b.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890/RD990 PCI to PCI bridge (PCI Express GFX2 port 0)
- Kernel driver in use: pcieport
- 00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] (rev 40)
- Subsystem: Gigabyte Technology Co., Ltd SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode]
- Kernel driver in use: ahci
- Kernel modules: ahci
- 00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
- Subsystem: Gigabyte Technology Co., Ltd SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
- Kernel driver in use: ohci-pci
- Kernel modules: ohci_pci
- 00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
- Subsystem: Gigabyte Technology Co., Ltd SB7x0/SB8x0/SB9x0 USB EHCI Controller
- Kernel driver in use: ehci-pci
- Kernel modules: ehci_pci
- 00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
- Subsystem: Gigabyte Technology Co., Ltd SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
- Kernel driver in use: ohci-pci
- Kernel modules: ohci_pci
- 00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
- Subsystem: Gigabyte Technology Co., Ltd SB7x0/SB8x0/SB9x0 USB EHCI Controller
- Kernel driver in use: ehci-pci
- Kernel modules: ehci_pci
- 00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller (rev 42)
- Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller
- Kernel driver in use: piix4_smbus
- Kernel modules: i2c_piix4, sp5100_tco
- 00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA) (rev 40)
- Subsystem: Gigabyte Technology Co., Ltd SBx00 Azalia (Intel HDA)
- Kernel driver in use: snd_hda_intel
- Kernel modules: snd_hda_intel
- 00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller (rev 40)
- Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller
- 00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI to PCI Bridge (rev 40)
- 00:14.5 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI2 Controller
- Subsystem: Gigabyte Technology Co., Ltd SB7x0/SB8x0/SB9x0 USB OHCI2 Controller
- Kernel driver in use: ohci-pci
- Kernel modules: ohci_pci
- 00:15.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB700/SB800/SB900 PCI to PCI bridge (PCIE port 0)
- Kernel driver in use: pcieport
- 00:15.1 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB700/SB800/SB900 PCI to PCI bridge (PCIE port 1)
- Kernel driver in use: pcieport
- 00:15.2 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB900 PCI to PCI bridge (PCIE port 2)
- Kernel driver in use: pcieport
- 00:15.3 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB900 PCI to PCI bridge (PCIE port 3)
- Kernel driver in use: pcieport
- 00:16.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
- Subsystem: Gigabyte Technology Co., Ltd SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
- Kernel driver in use: ohci-pci
- Kernel modules: ohci_pci
- 00:16.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
- Subsystem: Gigabyte Technology Co., Ltd SB7x0/SB8x0/SB9x0 USB EHCI Controller
- Kernel driver in use: ehci-pci
- Kernel modules: ehci_pci
- 00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor HyperTransport Configuration
- 00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Address Map
- 00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor DRAM Controller
- 00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Miscellaneous Control
- Kernel driver in use: k10temp
- Kernel modules: k10temp
- 00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Link Control
- 01:00.0 USB controller: Etron Technology, Inc. EJ168 USB 3.0 Host Controller (rev 01)
- Subsystem: Gigabyte Technology Co., Ltd EJ168 USB 3.0 Host Controller
- Kernel driver in use: xhci_hcd
- Kernel modules: xhci_pci
- 02:00.0 SATA controller: Marvell Technology Group Ltd. 88SE9172 SATA 6Gb/s Controller (rev 12)
- Subsystem: Gigabyte Technology Co., Ltd 88SE9172 SATA 6Gb/s Controller
- Kernel driver in use: ahci
- Kernel modules: ahci
- 03:00.0 VGA compatible controller: NVIDIA Corporation GM200 [GeForce GTX 980 Ti] (rev a1)
- Subsystem: PNY GM200 [GeForce GTX 980 Ti]
- Kernel driver in use: nouveau
- Kernel modules: nouveau
- 03:00.1 Audio device: NVIDIA Corporation GM200 High Definition Audio (rev a1)
- Subsystem: PNY GM200 High Definition Audio
- Kernel driver in use: snd_hda_intel
- Kernel modules: snd_hda_intel
- 04:0e.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller (rev c0)
- Subsystem: Gigabyte Technology Co., Ltd GA-7VT600-1394 Motherboard
- Kernel driver in use: firewire_ohci
- Kernel modules: firewire_ohci
- 05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06)
- Subsystem: Gigabyte Technology Co., Ltd Onboard Ethernet
- Kernel driver in use: r8169
- Kernel modules: r8169
- 06:00.0 USB controller: Etron Technology, Inc. EJ168 USB 3.0 Host Controller (rev 01)
- Subsystem: Gigabyte Technology Co., Ltd EJ168 USB 3.0 Host Controller
- Kernel driver in use: xhci_hcd
- Kernel modules: xhci_pci
- 07:00.0 SATA controller: Marvell Technology Group Ltd. 88SE9172 SATA 6Gb/s Controller (rev 12)
- Subsystem: Gigabyte Technology Co., Ltd 88SE9172 SATA 6Gb/s Controller
- Kernel driver in use: ahci
- Kernel modules: ahci
- 08:00.0 Network controller: Intel Corporation Device 2723 (rev 1a)
- Subsystem: Intel Corporation Device 0084
- uname -r
- 4.19.0-9-amd64
Quellcode
Hier kannst du den Code kopieren und ihn in deinen bevorzugten Editor einfügen. PASTEBIN_DOWNLOAD_SNIPPET_EXPLAIN