dmesg
von klaus_h- SNIPPET_TEXT:
-
- [ 0.000000] Linux version 4.19.0-10-amd64 (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP Debian 4.19.132-1 (2020-07-24)
- [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-10-amd64 root=UUID=e14515d0-a9e1-4a9c-8123-8aded17016d3 ro quiet
- [ 0.000000] Disabled fast string operations
- [ 0.000000] x86/fpu: x87 FPU will use FXSAVE
- [ 0.000000] BIOS-provided physical RAM map:
- [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
- [ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cf330fff] usable
- [ 0.000000] BIOS-e820: [mem 0x00000000cf331000-0x00000000cf377fff] ACPI NVS
- [ 0.000000] BIOS-e820: [mem 0x00000000cf378000-0x00000000cf388fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000cf389000-0x00000000cf390fff] ACPI data
- [ 0.000000] BIOS-e820: [mem 0x00000000cf391000-0x00000000cf393fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000cf394000-0x00000000cf397fff] type 20
- [ 0.000000] BIOS-e820: [mem 0x00000000cf398000-0x00000000cf3aafff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000cf3ab000-0x00000000cf3aefff] type 20
- [ 0.000000] BIOS-e820: [mem 0x00000000cf3af000-0x00000000cf3affff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000cf3b0000-0x00000000cf3b4fff] type 20
- [ 0.000000] BIOS-e820: [mem 0x00000000cf3b5000-0x00000000cf3b5fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000cf3b6000-0x00000000cf3b6fff] ACPI NVS
- [ 0.000000] BIOS-e820: [mem 0x00000000cf3b7000-0x00000000cf3c6fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000cf3c7000-0x00000000cf3d2fff] ACPI NVS
- [ 0.000000] BIOS-e820: [mem 0x00000000cf3d3000-0x00000000cf3d4fff] type 20
- [ 0.000000] BIOS-e820: [mem 0x00000000cf3d5000-0x00000000cf3e6fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000cf3e7000-0x00000000cf3f4fff] type 20
- [ 0.000000] BIOS-e820: [mem 0x00000000cf3f5000-0x00000000cf3f7fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000cf3f8000-0x00000000cf43afff] ACPI NVS
- [ 0.000000] BIOS-e820: [mem 0x00000000cf43b000-0x00000000cf5bafff] usable
- [ 0.000000] BIOS-e820: [mem 0x00000000cf5bb000-0x00000000cf6e6fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000cf6e7000-0x00000000cf6effff] usable
- [ 0.000000] BIOS-e820: [mem 0x00000000cf6f0000-0x00000000cfffffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fed14000-0x00000000fed19fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000012fffffff] usable
- [ 0.000000] NX (Execute Disable) protection: active
- [ 0.000000] efi: EFI v2.00 by American Megatrends
- [ 0.000000] efi: ACPI 2.0=0xcf389000 SMBIOS=0xf0480 ACPI=0xcf389000 MPS=0xfcb20
- [ 0.000000] secureboot: Secure boot could not be determined (mode 0)
- [ 0.000000] SMBIOS 2.7 present.
- [ 0.000000] DMI: /, BIOS 4.6.4 11/19/2012
- [ 0.000000] tsc: Fast TSC calibration using PIT
- [ 0.000000] tsc: Detected 1862.366 MHz processor
- [ 0.007948] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
- [ 0.007954] e820: remove [mem 0x000a0000-0x000fffff] usable
- [ 0.007984] last_pfn = 0x130000 max_arch_pfn = 0x400000000
- [ 0.007992] MTRR default type: uncachable
- [ 0.007994] MTRR fixed ranges enabled:
- [ 0.007998] 00000-9FFFF write-back
- [ 0.008001] A0000-BFFFF uncachable
- [ 0.008004] C0000-DFFFF write-protect
- [ 0.008006] E0000-E7FFF uncachable
- [ 0.008009] E8000-FFFFF write-protect
- [ 0.008011] MTRR variable ranges enabled:
- [ 0.008015] 0 base 000000000 mask F00000000 write-back
- [ 0.008019] 1 base 100000000 mask FE0000000 write-back
- [ 0.008022] 2 base 120000000 mask FF0000000 write-back
- [ 0.008025] 3 base 0CF700000 mask FFFF00000 write-through
- [ 0.008029] 4 base 0CF800000 mask FFF800000 uncachable
- [ 0.008032] 5 base 0D0000000 mask FF0000000 uncachable
- [ 0.008035] 6 base 0E0000000 mask FE0000000 uncachable
- [ 0.008249] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
- [ 0.008318] last_pfn = 0xcf6f0 max_arch_pfn = 0x400000000
- [ 0.016797] found SMP MP-table at [mem 0x000fce50-0x000fce5f]
- [ 0.019701] RAMDISK: [mem 0x34d3f000-0x36696fff]
- [ 0.019711] ACPI: Early table checksum verification disabled
- [ 0.019721] ACPI: RSDP 0x00000000CF389000 000024 (v02 _ )
- [ 0.019729] ACPI: XSDT 0x00000000CF389068 00004C (v01 _ _ 01072009 AMI 00010013)
- [ 0.019742] ACPI: FACP 0x00000000CF390538 0000F4 (v04 _ _ 01072009 AMI 00010013)
- [ 0.019755] ACPI: DSDT 0x00000000CF389140 0073F2 (v02 _ _ 00000A03 INTL 20051117)
- [ 0.019765] ACPI: FACS 0x00000000CF3D0F80 000040
- [ 0.019772] ACPI: APIC 0x00000000CF390630 000072 (v03 _ _ 01072009 AMI 00010013)
- [ 0.019780] ACPI: MCFG 0x00000000CF3906A8 00003C (v01 _ _ 01072009 MSFT 00000097)
- [ 0.019789] ACPI: HPET 0x00000000CF3906E8 000038 (v01 _ _ 01072009 AMI. 00000004)
- [ 0.019798] ACPI: SSDT 0x00000000CF390720 000655 (v01 PmRef CpuPm 00003000 INTL 20051117)
- [ 0.019816] ACPI: Local APIC address 0xfee00000
- [ 0.020093] No NUMA configuration found
- [ 0.020096] Faking a node at [mem 0x0000000000000000-0x000000012fffffff]
- [ 0.020107] NODE_DATA(0) allocated [mem 0x12fff7000-0x12fffbfff]
- [ 0.020213] Zone ranges:
- [ 0.020215] DMA [mem 0x0000000000001000-0x0000000000ffffff]
- [ 0.020219] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
- [ 0.020222] Normal [mem 0x0000000100000000-0x000000012fffffff]
- [ 0.020230] Early memory node ranges
- [ 0.020232] node 0: [mem 0x0000000000001000-0x000000000009ffff]
- [ 0.020235] node 0: [mem 0x0000000000100000-0x00000000cf330fff]
- [ 0.020238] node 0: [mem 0x00000000cf43b000-0x00000000cf5bafff]
- [ 0.020240] node 0: [mem 0x00000000cf6e7000-0x00000000cf6effff]
- [ 0.020242] node 0: [mem 0x0000000100000000-0x000000012fffffff]
- [ 0.020379] Zeroed struct page in unavailable ranges: 2983 pages
- [ 0.020382] Initmem setup node 0 [mem 0x0000000000001000-0x000000012fffffff]
- [ 0.020387] On node 0 totalpages: 1045593
- [ 0.020390] DMA zone: 64 pages used for memmap
- [ 0.020392] DMA zone: 45 pages reserved
- [ 0.020395] DMA zone: 3999 pages, LIFO batch:0
- [ 0.020664] DMA32 zone: 13203 pages used for memmap
- [ 0.020667] DMA32 zone: 844986 pages, LIFO batch:63
- [ 0.078163] Normal zone: 3072 pages used for memmap
- [ 0.078167] Normal zone: 196608 pages, LIFO batch:63
- [ 0.091124] ACPI: PM-Timer IO Port: 0x408
- [ 0.091129] ACPI: Local APIC address 0xfee00000
- [ 0.091145] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
- [ 0.091165] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
- [ 0.091169] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- [ 0.091173] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
- [ 0.091177] ACPI: IRQ0 used by override.
- [ 0.091180] ACPI: IRQ9 used by override.
- [ 0.091185] Using ACPI (MADT) for SMP configuration information
- [ 0.091189] ACPI: HPET id: 0x8086a201 base: 0xfed00000
- [ 0.091202] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
- [ 0.091330] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
- [ 0.091337] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
- [ 0.091344] PM: Registered nosave memory: [mem 0xcf331000-0xcf377fff]
- [ 0.091347] PM: Registered nosave memory: [mem 0xcf378000-0xcf388fff]
- [ 0.091349] PM: Registered nosave memory: [mem 0xcf389000-0xcf390fff]
- [ 0.091351] PM: Registered nosave memory: [mem 0xcf391000-0xcf393fff]
- [ 0.091353] PM: Registered nosave memory: [mem 0xcf394000-0xcf397fff]
- [ 0.091355] PM: Registered nosave memory: [mem 0xcf398000-0xcf3aafff]
- [ 0.091358] PM: Registered nosave memory: [mem 0xcf3ab000-0xcf3aefff]
- [ 0.091360] PM: Registered nosave memory: [mem 0xcf3af000-0xcf3affff]
- [ 0.091362] PM: Registered nosave memory: [mem 0xcf3b0000-0xcf3b4fff]
- [ 0.091364] PM: Registered nosave memory: [mem 0xcf3b5000-0xcf3b5fff]
- [ 0.091367] PM: Registered nosave memory: [mem 0xcf3b6000-0xcf3b6fff]
- [ 0.091369] PM: Registered nosave memory: [mem 0xcf3b7000-0xcf3c6fff]
- [ 0.091371] PM: Registered nosave memory: [mem 0xcf3c7000-0xcf3d2fff]
- [ 0.091373] PM: Registered nosave memory: [mem 0xcf3d3000-0xcf3d4fff]
- [ 0.091376] PM: Registered nosave memory: [mem 0xcf3d5000-0xcf3e6fff]
- [ 0.091378] PM: Registered nosave memory: [mem 0xcf3e7000-0xcf3f4fff]
- [ 0.091380] PM: Registered nosave memory: [mem 0xcf3f5000-0xcf3f7fff]
- [ 0.091382] PM: Registered nosave memory: [mem 0xcf3f8000-0xcf43afff]
- [ 0.091389] PM: Registered nosave memory: [mem 0xcf5bb000-0xcf6e6fff]
- [ 0.091396] PM: Registered nosave memory: [mem 0xcf6f0000-0xcfffffff]
- [ 0.091398] PM: Registered nosave memory: [mem 0xd0000000-0xdfffffff]
- [ 0.091401] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
- [ 0.091403] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
- [ 0.091405] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
- [ 0.091407] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
- [ 0.091410] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
- [ 0.091412] PM: Registered nosave memory: [mem 0xfed01000-0xfed13fff]
- [ 0.091414] PM: Registered nosave memory: [mem 0xfed14000-0xfed19fff]
- [ 0.091416] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
- [ 0.091419] PM: Registered nosave memory: [mem 0xfed1c000-0xfed8ffff]
- [ 0.091421] PM: Registered nosave memory: [mem 0xfed90000-0xfedfffff]
- [ 0.091423] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
- [ 0.091425] PM: Registered nosave memory: [mem 0xfee01000-0xffdfffff]
- [ 0.091427] PM: Registered nosave memory: [mem 0xffe00000-0xffffffff]
- [ 0.091432] [mem 0xd0000000-0xdfffffff] available for PCI devices
- [ 0.091439] Booting paravirtualized kernel on bare hardware
- [ 0.091446] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
- [ 0.438829] random: get_random_bytes called from start_kernel+0x93/0x52f with crng_init=0
- [ 0.438857] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
- [ 0.442011] percpu: Embedded 45 pages/cpu s144408 r8192 d31720 u524288
- [ 0.442040] pcpu-alloc: s144408 r8192 d31720 u524288 alloc=1*2097152
- [ 0.442043] pcpu-alloc: [0] 0 1 2 3
- [ 0.442129] Built 1 zonelists, mobility grouping on. Total pages: 1029209
- [ 0.442131] Policy zone: Normal
- [ 0.442136] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-10-amd64 root=UUID=e14515d0-a9e1-4a9c-8123-8aded17016d3 ro quiet
- [ 0.504349] Calgary: detecting Calgary via BIOS EBDA area
- [ 0.504353] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
- [ 0.589737] Memory: 3978040K/4182372K available (10252K kernel code, 1241K rwdata, 3316K rodata, 1592K init, 2272K bss, 204332K reserved, 0K cma-reserved)
- [ 0.590111] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 0.590133] ftrace: allocating 31900 entries in 125 pages
- [ 0.621517] rcu: Hierarchical RCU implementation.
- [ 0.621521] rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
- [ 0.621524] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
- [ 0.632431] NR_IRQS: 33024, nr_irqs: 456, preallocated irqs: 16
- [ 0.632877] Console: colour dummy device 80x25
- [ 0.632886] console [tty0] enabled
- [ 0.632954] ACPI: Core revision 20180810
- [ 0.633311] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
- [ 0.633329] hpet clockevent registered
- [ 0.633339] APIC: Switch to symmetric I/O mode setup
- [ 0.633816] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
- [ 0.653338] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x35b098a8887, max_idle_ns: 881590503312 ns
- [ 0.653360] Calibrating delay loop (skipped), value calculated using timer frequency.. 3724.73 BogoMIPS (lpj=7449464)
- [ 0.653366] pid_max: default: 32768 minimum: 301
- [ 0.662753] Security Framework initialized
- [ 0.662757] Yama: disabled by default; enable with sysctl kernel.yama.*
- [ 0.662806] AppArmor: AppArmor initialized
- [ 0.668417] Disabled fast string operations
- [ 0.668452] CPU0: Thermal monitoring enabled (TM1)
- [ 0.668457] process: using mwait in idle threads
- [ 0.668464] Last level iTLB entries: 4KB 32, 2MB 0, 4MB 0
- [ 0.668467] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8, 1GB 0
- [ 0.668724] Freeing SMP alternatives memory: 24K
- [ 0.782124] smpboot: CPU0: Intel(R) Atom(TM) CPU D2550 @ 1.86GHz (family: 0x6, model: 0x36, stepping: 0x1)
- [ 0.782517] Performance Events: PEBS fmt0+, Atom events, 8-deep LBR, Intel PMU driver.
- [ 0.782542] ... version: 3
- [ 0.782544] ... bit width: 40
- [ 0.782545] ... generic registers: 2
- [ 0.782547] ... value mask: 000000ffffffffff
- [ 0.782550] ... fixed-purpose events: 3
- [ 0.782552] ... event mask: 0000000700000003
- [ 0.782711] rcu: Hierarchical SRCU implementation.
- [ 0.783916] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
- [ 0.784150] smp: Bringing up secondary CPUs ...
- [ 0.784499] x86: Booting SMP configuration:
- [ 0.784503] .... node #0, CPUs: #1
- [ 0.004540] Disabled fast string operations
- [ 0.785341] TSC synchronization [CPU#0 -> CPU#1]:
- [ 0.785341] Measured 3451 cycles TSC warp between CPUs, turning off TSC clock.
- [ 0.785341] tsc: Marking TSC unstable due to check_tsc_sync_source failed
- [ 0.785664] #2
- [ 0.004540] Disabled fast string operations
- [ 0.785795] #3
- [ 0.004540] Disabled fast string operations
- [ 0.785795] smp: Brought up 1 node, 4 CPUs
- [ 0.785795] smpboot: Total of 4 processors activated (14898.92 BogoMIPS)
- [ 0.786687] devtmpfs: initialized
- [ 0.786687] x86/mm: Memory block size: 128MB
- [ 0.790814] PM: Registering ACPI NVS region [mem 0xcf331000-0xcf377fff] (290816 bytes)
- [ 0.790814] PM: Registering ACPI NVS region [mem 0xcf3b6000-0xcf3b6fff] (4096 bytes)
- [ 0.790814] PM: Registering ACPI NVS region [mem 0xcf3c7000-0xcf3d2fff] (49152 bytes)
- [ 0.790814] PM: Registering ACPI NVS region [mem 0xcf3f8000-0xcf43afff] (274432 bytes)
- [ 0.790814] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
- [ 0.790814] pinctrl core: initialized pinctrl subsystem
- [ 0.790814] NET: Registered protocol family 16
- [ 0.790814] audit: initializing netlink subsys (disabled)
- [ 0.790814] audit: type=2000 audit(1596312078.156:1): state=initialized audit_enabled=0 res=1
- [ 0.790814] cpuidle: using governor ladder
- [ 0.790814] cpuidle: using governor menu
- [ 0.790814] ACPI: bus type PCI registered
- [ 0.790814] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
- [ 0.790814] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
- [ 0.790814] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
- [ 0.790814] pmd_set_huge: Cannot satisfy [mem 0xe0000000-0xe0200000] with a huge-page mapping due to MTRR override.
- [ 0.794158] PCI: Using configuration type 1 for base access
- [ 0.797372] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
- [ 0.797646] ACPI: Added _OSI(Module Device)
- [ 0.797649] ACPI: Added _OSI(Processor Device)
- [ 0.797651] ACPI: Added _OSI(3.0 _SCP Extensions)
- [ 0.797653] ACPI: Added _OSI(Processor Aggregator Device)
- [ 0.797656] ACPI: Added _OSI(Linux-Dell-Video)
- [ 0.797659] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
- [ 0.808067] ACPI: 2 ACPI AML tables successfully acquired and loaded
- [ 0.810581] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
- [ 0.811617] ACPI: Dynamic OEM Table Load:
- [ 0.811632] ACPI: SSDT 0xFFFF90A52AA28800 0006D5 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
- [ 0.812826] ACPI: Dynamic OEM Table Load:
- [ 0.812834] ACPI: SSDT 0xFFFF90A52AB10840 00008D (v01 PmRef ApCst 00003000 INTL 20051117)
- [ 0.815241] ACPI: Interpreter enabled
- [ 0.815288] ACPI: (supports S0 S1 S4 S5)
- [ 0.815292] ACPI: Using IOAPIC for interrupt routing
- [ 0.815368] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
- [ 0.816080] ACPI: Enabled 12 GPEs in block 00 to 1F
- [ 0.836101] ACPI: Power Resource [FN00] (off)
- [ 0.837899] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
- [ 0.837911] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
- [ 0.838039] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
- [ 0.838745] PCI host bridge to bus 0000:00
- [ 0.838753] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
- [ 0.838757] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
- [ 0.838761] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
- [ 0.838765] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
- [ 0.838768] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000effff window]
- [ 0.838772] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
- [ 0.838776] pci_bus 0000:00: root bus resource [mem 0xcf800000-0xcfffffff window]
- [ 0.838779] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfebfffff window]
- [ 0.838783] pci_bus 0000:00: root bus resource [bus 00-ff]
- [ 0.838799] pci 0000:00:00.0: [8086:0bf3] type 00 class 0x060000
- [ 0.839025] pci 0000:00:02.0: [8086:0be2] type 00 class 0x030000
- [ 0.839041] pci 0000:00:02.0: reg 0x10: [mem 0xdfa00000-0xdfafffff]
- [ 0.839049] pci 0000:00:02.0: reg 0x14: [io 0xf0f0-0xf0f7]
- [ 0.839294] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
- [ 0.839324] pci 0000:00:1b.0: reg 0x10: [mem 0xdff00000-0xdff03fff 64bit]
- [ 0.839424] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
- [ 0.839627] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
- [ 0.839753] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
- [ 0.839964] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
- [ 0.840083] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
- [ 0.840291] pci 0000:00:1c.2: [8086:27d4] type 01 class 0x060400
- [ 0.840409] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
- [ 0.840618] pci 0000:00:1c.3: [8086:27d6] type 01 class 0x060400
- [ 0.840736] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
- [ 0.840944] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
- [ 0.841002] pci 0000:00:1d.0: reg 0x20: [io 0xf080-0xf09f]
- [ 0.841220] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
- [ 0.841279] pci 0000:00:1d.1: reg 0x20: [io 0xf060-0xf07f]
- [ 0.841510] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
- [ 0.841569] pci 0000:00:1d.2: reg 0x20: [io 0xf040-0xf05f]
- [ 0.841779] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
- [ 0.841837] pci 0000:00:1d.3: reg 0x20: [io 0xf020-0xf03f]
- [ 0.842064] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
- [ 0.842095] pci 0000:00:1d.7: reg 0x10: [mem 0xdff05000-0xdff053ff]
- [ 0.842205] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
- [ 0.842397] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
- [ 0.842653] pci 0000:00:1f.0: [8086:27bc] type 00 class 0x060100
- [ 0.842966] pci 0000:00:1f.2: [8086:27c0] type 00 class 0x01018f
- [ 0.842991] pci 0000:00:1f.2: reg 0x10: [io 0xf0e0-0xf0e7]
- [ 0.843002] pci 0000:00:1f.2: reg 0x14: [io 0xf0d0-0xf0d3]
- [ 0.843013] pci 0000:00:1f.2: reg 0x18: [io 0xf0c0-0xf0c7]
- [ 0.843025] pci 0000:00:1f.2: reg 0x1c: [io 0xf0b0-0xf0b3]
- [ 0.843036] pci 0000:00:1f.2: reg 0x20: [io 0xf0a0-0xf0af]
- [ 0.843048] pci 0000:00:1f.2: reg 0x24: [mem 0xdff04000-0xdff043ff]
- [ 0.843095] pci 0000:00:1f.2: PME# supported from D3hot
- [ 0.843275] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
- [ 0.843331] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
- [ 0.843668] pci 0000:01:00.0: [1b21:0612] type 00 class 0x010601
- [ 0.843707] pci 0000:01:00.0: reg 0x10: [io 0xe050-0xe057]
- [ 0.843724] pci 0000:01:00.0: reg 0x14: [io 0xe040-0xe043]
- [ 0.843741] pci 0000:01:00.0: reg 0x18: [io 0xe030-0xe037]
- [ 0.843758] pci 0000:01:00.0: reg 0x1c: [io 0xe020-0xe023]
- [ 0.843775] pci 0000:01:00.0: reg 0x20: [io 0xe000-0xe01f]
- [ 0.843792] pci 0000:01:00.0: reg 0x24: [mem 0xdfe10000-0xdfe101ff]
- [ 0.843810] pci 0000:01:00.0: reg 0x30: [mem 0xdfe00000-0xdfe0ffff pref]
- [ 0.844083] pci 0000:00:1c.0: PCI bridge to [bus 01]
- [ 0.844090] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
- [ 0.844096] pci 0000:00:1c.0: bridge window [mem 0xdfe00000-0xdfefffff]
- [ 0.844227] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
- [ 0.844265] pci 0000:02:00.0: reg 0x10: [io 0xd000-0xd0ff]
- [ 0.844301] pci 0000:02:00.0: reg 0x18: [mem 0xdfd04000-0xdfd04fff 64bit pref]
- [ 0.844324] pci 0000:02:00.0: reg 0x20: [mem 0xdfd00000-0xdfd03fff 64bit pref]
- [ 0.844451] pci 0000:02:00.0: supports D1 D2
- [ 0.844455] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.844668] pci 0000:00:1c.1: PCI bridge to [bus 02]
- [ 0.844675] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
- [ 0.844681] pci 0000:00:1c.1: bridge window [mem 0xdfd00000-0xdfdfffff]
- [ 0.844821] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
- [ 0.844859] pci 0000:03:00.0: reg 0x10: [io 0xc000-0xc0ff]
- [ 0.844895] pci 0000:03:00.0: reg 0x18: [mem 0xdfc04000-0xdfc04fff 64bit pref]
- [ 0.844918] pci 0000:03:00.0: reg 0x20: [mem 0xdfc00000-0xdfc03fff 64bit pref]
- [ 0.845044] pci 0000:03:00.0: supports D1 D2
- [ 0.845047] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.845269] pci 0000:00:1c.2: PCI bridge to [bus 03]
- [ 0.845275] pci 0000:00:1c.2: bridge window [io 0xc000-0xcfff]
- [ 0.845281] pci 0000:00:1c.2: bridge window [mem 0xdfc00000-0xdfcfffff]
- [ 0.845439] pci 0000:04:00.0: [1b21:0611] type 00 class 0x010185
- [ 0.845479] pci 0000:04:00.0: reg 0x10: [io 0xb040-0xb047]
- [ 0.845496] pci 0000:04:00.0: reg 0x14: [io 0xb030-0xb033]
- [ 0.845513] pci 0000:04:00.0: reg 0x18: [io 0xb020-0xb027]
- [ 0.845530] pci 0000:04:00.0: reg 0x1c: [io 0xb010-0xb013]
- [ 0.845547] pci 0000:04:00.0: reg 0x20: [io 0xb000-0xb00f]
- [ 0.845564] pci 0000:04:00.0: reg 0x24: [mem 0xdfb00000-0xdfb001ff]
- [ 0.845854] pci 0000:00:1c.3: PCI bridge to [bus 04]
- [ 0.845860] pci 0000:00:1c.3: bridge window [io 0xb000-0xbfff]
- [ 0.845866] pci 0000:00:1c.3: bridge window [mem 0xdfb00000-0xdfbfffff]
- [ 0.845900] pci_bus 0000:05: extended config space not accessible
- [ 0.846005] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
- [ 0.846022] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
- [ 0.846026] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
- [ 0.846030] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
- [ 0.846042] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
- [ 0.846045] pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000effff window] (subtractive decode)
- [ 0.846049] pci 0000:00:1e.0: bridge window [mem 0x000f0000-0x000fffff window] (subtractive decode)
- [ 0.846053] pci 0000:00:1e.0: bridge window [mem 0xcf800000-0xcfffffff window] (subtractive decode)
- [ 0.846057] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xfebfffff window] (subtractive decode)
- [ 0.850295] pci 0000:00:02.0: vgaarb: setting as boot VGA device
- [ 0.850295] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
- [ 0.850295] pci 0000:00:02.0: vgaarb: bridge control possible
- [ 0.850295] vgaarb: loaded
- [ 0.850295] pps_core: LinuxPPS API ver. 1 registered
- [ 0.850295] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
- [ 0.850295] PTP clock support registered
- [ 0.850295] EDAC MC: Ver: 3.0.0
- [ 0.850295] Registered efivars operations
- [ 0.850295] PCI: Using ACPI for IRQ routing
- [ 0.858901] PCI: pci_cache_line_size set to 64 bytes
- [ 0.858995] e820: reserve RAM buffer [mem 0xcf331000-0xcfffffff]
- [ 0.859002] e820: reserve RAM buffer [mem 0xcf5bb000-0xcfffffff]
- [ 0.859005] e820: reserve RAM buffer [mem 0xcf6f0000-0xcfffffff]
- [ 0.859364] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
- [ 0.859364] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
- [ 0.861406] clocksource: Switched to clocksource hpet
- [ 0.896806] VFS: Disk quotas dquot_6.6.0
- [ 0.897158] AppArmor: AppArmor Filesystem Enabled
- [ 0.897222] pnp: PnP ACPI init
- [ 0.898174] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
- [ 0.898686] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
- [ 0.898826] pnp 00:06: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
- [ 0.899469] pnp 00:07: [dma 3]
- [ 0.899723] pnp 00:07: Plug and Play ACPI device, IDs PNP0400 (active)
- [ 0.900197] pnp 00:08: [dma 0 disabled]
- [ 0.900322] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
- [ 0.900795] pnp 00:09: [dma 0 disabled]
- [ 0.900920] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
- [ 0.903352] pnp: PnP ACPI: found 15 devices
- [ 0.913464] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
- [ 0.913506] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
- [ 0.913521] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
- [ 0.913535] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
- [ 0.913549] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000
- [ 0.913591] pci 0000:00:1c.0: BAR 15: assigned [mem 0xd0000000-0xd01fffff 64bit pref]
- [ 0.913605] pci 0000:00:1c.1: BAR 15: assigned [mem 0xd0200000-0xd03fffff 64bit pref]
- [ 0.913619] pci 0000:00:1c.2: BAR 15: assigned [mem 0xd0400000-0xd05fffff 64bit pref]
- [ 0.913632] pci 0000:00:1c.3: BAR 15: assigned [mem 0xd0600000-0xd07fffff 64bit pref]
- [ 0.913640] pci 0000:00:1c.0: PCI bridge to [bus 01]
- [ 0.913645] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
- [ 0.913652] pci 0000:00:1c.0: bridge window [mem 0xdfe00000-0xdfefffff]
- [ 0.913658] pci 0000:00:1c.0: bridge window [mem 0xd0000000-0xd01fffff 64bit pref]
- [ 0.913667] pci 0000:00:1c.1: PCI bridge to [bus 02]
- [ 0.913671] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
- [ 0.913678] pci 0000:00:1c.1: bridge window [mem 0xdfd00000-0xdfdfffff]
- [ 0.913684] pci 0000:00:1c.1: bridge window [mem 0xd0200000-0xd03fffff 64bit pref]
- [ 0.913693] pci 0000:00:1c.2: PCI bridge to [bus 03]
- [ 0.913697] pci 0000:00:1c.2: bridge window [io 0xc000-0xcfff]
- [ 0.913704] pci 0000:00:1c.2: bridge window [mem 0xdfc00000-0xdfcfffff]
- [ 0.913710] pci 0000:00:1c.2: bridge window [mem 0xd0400000-0xd05fffff 64bit pref]
- [ 0.913718] pci 0000:00:1c.3: PCI bridge to [bus 04]
- [ 0.913722] pci 0000:00:1c.3: bridge window [io 0xb000-0xbfff]
- [ 0.913729] pci 0000:00:1c.3: bridge window [mem 0xdfb00000-0xdfbfffff]
- [ 0.913735] pci 0000:00:1c.3: bridge window [mem 0xd0600000-0xd07fffff 64bit pref]
- [ 0.913744] pci 0000:00:1e.0: PCI bridge to [bus 05]
- [ 0.913761] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
- [ 0.913764] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
- [ 0.913768] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
- [ 0.913771] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window]
- [ 0.913775] pci_bus 0000:00: resource 8 [mem 0x000e0000-0x000effff window]
- [ 0.913778] pci_bus 0000:00: resource 9 [mem 0x000f0000-0x000fffff window]
- [ 0.913782] pci_bus 0000:00: resource 10 [mem 0xcf800000-0xcfffffff window]
- [ 0.913786] pci_bus 0000:00: resource 11 [mem 0xd0000000-0xfebfffff window]
- [ 0.913790] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
- [ 0.913793] pci_bus 0000:01: resource 1 [mem 0xdfe00000-0xdfefffff]
- [ 0.913797] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xd01fffff 64bit pref]
- [ 0.913800] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
- [ 0.913804] pci_bus 0000:02: resource 1 [mem 0xdfd00000-0xdfdfffff]
- [ 0.913807] pci_bus 0000:02: resource 2 [mem 0xd0200000-0xd03fffff 64bit pref]
- [ 0.913811] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
- [ 0.913814] pci_bus 0000:03: resource 1 [mem 0xdfc00000-0xdfcfffff]
- [ 0.913818] pci_bus 0000:03: resource 2 [mem 0xd0400000-0xd05fffff 64bit pref]
- [ 0.913822] pci_bus 0000:04: resource 0 [io 0xb000-0xbfff]
- [ 0.913825] pci_bus 0000:04: resource 1 [mem 0xdfb00000-0xdfbfffff]
- [ 0.913829] pci_bus 0000:04: resource 2 [mem 0xd0600000-0xd07fffff 64bit pref]
- [ 0.913833] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7 window]
- [ 0.913836] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff window]
- [ 0.913840] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window]
- [ 0.913844] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000dffff window]
- [ 0.913847] pci_bus 0000:05: resource 8 [mem 0x000e0000-0x000effff window]
- [ 0.913850] pci_bus 0000:05: resource 9 [mem 0x000f0000-0x000fffff window]
- [ 0.913854] pci_bus 0000:05: resource 10 [mem 0xcf800000-0xcfffffff window]
- [ 0.913858] pci_bus 0000:05: resource 11 [mem 0xd0000000-0xfebfffff window]
- [ 0.914122] NET: Registered protocol family 2
- [ 0.915672] NET: Registered protocol family 1
- [ 0.915688] NET: Registered protocol family 44
- [ 0.915717] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
- [ 0.949503] pci 0000:00:1d.7: quirk_usb_early_handoff+0x0/0x6c1 took 32030 usecs
- [ 0.949551] PCI: CLS 64 bytes, default 64
- [ 0.949686] Unpacking initramfs...
- [ 2.018699] Freeing initrd memory: 25952K
- [ 2.018794] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
- [ 2.018800] software IO TLB: mapped [mem 0xcb331000-0xcf331000] (64MB)
- [ 2.020842] workingset: timestamp_bits=40 max_order=20 bucket_order=0
- [ 2.025343] zbud: loaded
- [ 3.094030] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
- [ 3.094162] io scheduler noop registered
- [ 3.094165] io scheduler deadline registered
- [ 3.094280] io scheduler cfq registered (default)
- [ 3.094283] io scheduler mq-deadline registered
- [ 3.095559] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
- [ 3.095603] efifb: probing for efifb
- [ 3.095636] efifb: framebuffer at 0xcf800000, using 1920k, total 1920k
- [ 3.095639] efifb: mode is 800x600x32, linelength=3200, pages=1
- [ 3.095641] efifb: scrolling: redraw
- [ 3.095644] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
- [ 3.100682] Console: switching to colour frame buffer device 100x37
- [ 3.105425] fb0: EFI VGA frame buffer device
- [ 3.105464] intel_idle: MWAIT substates: 0x10
- [ 3.105467] intel_idle: v0.4.1 model 0x36
- [ 3.105741] intel_idle: lapic_timer_reliable_states 0xffffffff
- [ 3.106545] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- [ 3.127287] 00:08: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
- [ 3.148138] 00:09: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
- [ 3.149239] Linux agpgart interface v0.103
- [ 3.149473] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
- [ 3.150375] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
- [ 3.150859] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 3.150949] serio: i8042 AUX port at 0x60,0x64 irq 12
- [ 3.151223] mousedev: PS/2 mouse device common for all mice
- [ 3.151327] rtc_cmos 00:03: RTC can wake from S4
- [ 3.151564] rtc_cmos 00:03: registered as rtc0
- [ 3.151618] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
- [ 3.151744] ledtrig-cpu: registered to indicate activity on CPUs
- [ 3.153054] NET: Registered protocol family 10
- [ 3.175657] Segment Routing with IPv6
- [ 3.175709] mip6: Mobile IPv6
- [ 3.175715] NET: Registered protocol family 17
- [ 3.175828] mpls_gso: MPLS GSO support
- [ 3.176316] mce: Using 5 MCE banks
- [ 3.176421] microcode: sig=0x30661, pf=0x4, revision=0x10d
- [ 3.176588] microcode: Microcode Update Driver: v2.2.
- [ 3.176969] registered taskstats version 1
- [ 3.176971] Loading compiled-in X.509 certificates
- [ 3.422380] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
- [ 3.422431] Loaded X.509 cert 'Debian Secure Boot Signer 2020: 00b55eb3b9'
- [ 3.450997] zswap: loaded using pool lzo/zbud
- [ 3.452396] Unstable clock detected, switching default tracing clock to "global"
- If you want to keep using the local clock, then add:
- "trace_clock=local"
- on the kernel command line
- [ 3.457832] Freeing unused kernel image memory: 1592K
- [ 3.477389] Write protecting the kernel read-only data: 16384k
- [ 3.479576] Freeing unused kernel image memory: 2028K
- [ 3.480300] Freeing unused kernel image memory: 780K
- [ 3.514294] x86/mm: Checked W+X mappings: passed, no W+X pages found.
- [ 3.514300] Run /init as init process
- [ 3.770192] thermal LNXTHERM:00: registered as thermal_zone0
- [ 3.770198] ACPI: Thermal Zone [THRM] (67 C)
- [ 3.770597] thermal LNXTHERM:01: registered as thermal_zone1
- [ 3.770601] ACPI: Thermal Zone [TZ00] (27 C)
- [ 3.771577] thermal LNXTHERM:02: registered as thermal_zone2
- [ 3.771581] ACPI: Thermal Zone [TZ01] (27 C)
- [ 3.797817] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
- [ 3.863958] libphy: r8169: probed
- [ 3.864744] r8169 0000:02:00.0 eth0: RTL8168evl/8111evl, 00:30:18:a1:76:2b, XID 2c900800, IRQ 24
- [ 3.864751] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
- [ 3.864827] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
- [ 3.866665] SCSI subsystem initialized
- [ 3.874083] ACPI: bus type USB registered
- [ 3.874160] usbcore: registered new interface driver usbfs
- [ 3.874202] usbcore: registered new interface driver hub
- [ 3.874997] usbcore: registered new device driver usb
- [ 3.877199] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000042F (\SWC1) (20180810/utaddress-213)
- [ 3.877216] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20180810/utaddress-213)
- [ 3.877228] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
- [ 3.877233] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000053B (\GPIO) (20180810/utaddress-213)
- [ 3.877244] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
- [ 3.877247] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000053B (\GPIO) (20180810/utaddress-213)
- [ 3.877258] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
- [ 3.877260] lpc_ich: Resource conflict(s) found affecting gpio_ich
- [ 3.886557] i801_smbus 0000:00:1f.3: enabling device (0000 -> 0001)
- [ 3.886811] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
- [ 3.898172] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 3.913708] uhci_hcd: USB Universal Host Controller Interface driver
- [ 3.914019] uhci_hcd 0000:00:1d.0: UHCI Host Controller
- [ 3.914038] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
- [ 3.914054] uhci_hcd 0000:00:1d.0: detected 2 ports
- [ 3.914108] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000f080
- [ 3.919118] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
- [ 3.919125] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 3.919129] usb usb1: Product: UHCI Host Controller
- [ 3.919133] usb usb1: Manufacturer: Linux 4.19.0-10-amd64 uhci_hcd
- [ 3.919137] usb usb1: SerialNumber: 0000:00:1d.0
- [ 3.919597] hub 1-0:1.0: USB hub found
- [ 3.919624] hub 1-0:1.0: 2 ports detected
- [ 3.920273] uhci_hcd 0000:00:1d.1: UHCI Host Controller
- [ 3.920292] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
- [ 3.920307] uhci_hcd 0000:00:1d.1: detected 2 ports
- [ 3.920341] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000f060
- [ 3.920543] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
- [ 3.920549] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 3.920553] usb usb2: Product: UHCI Host Controller
- [ 3.920558] usb usb2: Manufacturer: Linux 4.19.0-10-amd64 uhci_hcd
- [ 3.920562] usb usb2: SerialNumber: 0000:00:1d.1
- [ 3.920981] hub 2-0:1.0: USB hub found
- [ 3.921007] hub 2-0:1.0: 2 ports detected
- [ 3.921669] uhci_hcd 0000:00:1d.2: UHCI Host Controller
- [ 3.921688] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
- [ 3.921703] uhci_hcd 0000:00:1d.2: detected 2 ports
- [ 3.921767] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000f040
- [ 3.921967] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
- [ 3.921973] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 3.921977] usb usb3: Product: UHCI Host Controller
- [ 3.921981] usb usb3: Manufacturer: Linux 4.19.0-10-amd64 uhci_hcd
- [ 3.921985] usb usb3: SerialNumber: 0000:00:1d.2
- [ 3.922412] hub 3-0:1.0: USB hub found
- [ 3.922438] hub 3-0:1.0: 2 ports detected
- [ 3.923068] uhci_hcd 0000:00:1d.3: UHCI Host Controller
- [ 3.923086] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
- [ 3.923101] uhci_hcd 0000:00:1d.3: detected 2 ports
- [ 3.923156] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000f020
- [ 3.923350] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
- [ 3.923356] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 3.923360] usb usb4: Product: UHCI Host Controller
- [ 3.923365] usb usb4: Manufacturer: Linux 4.19.0-10-amd64 uhci_hcd
- [ 3.923369] usb usb4: SerialNumber: 0000:00:1d.3
- [ 3.923784] hub 4-0:1.0: USB hub found
- [ 3.923810] hub 4-0:1.0: 2 ports detected
- [ 3.928474] libphy: r8169: probed
- [ 3.929237] r8169 0000:03:00.0 eth1: RTL8168evl/8111evl, 00:30:18:a1:76:2c, XID 2c900800, IRQ 25
- [ 3.929244] r8169 0000:03:00.0 eth1: jumbo features [frames: 9200 bytes, tx checksumming: ko]
- [ 3.934236] ehci-pci: EHCI PCI platform driver
- [ 3.935743] ehci-pci 0000:00:1d.7: EHCI Host Controller
- [ 3.935766] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 5
- [ 3.935794] ehci-pci 0000:00:1d.7: debug port 1
- [ 3.939740] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
- [ 3.939763] ehci-pci 0000:00:1d.7: irq 23, io mem 0xdff05000
- [ 3.957712] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
- [ 3.957967] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
- [ 3.957973] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 3.957977] usb usb5: Product: EHCI Host Controller
- [ 3.957981] usb usb5: Manufacturer: Linux 4.19.0-10-amd64 ehci_hcd
- [ 3.957986] usb usb5: SerialNumber: 0000:00:1d.7
- [ 3.958451] hub 5-0:1.0: USB hub found
- [ 3.958484] hub 5-0:1.0: 8 ports detected
- [ 3.959572] libata version 3.00 loaded.
- [ 3.966814] ata_piix 0000:00:1f.2: version 2.13
- [ 3.967014] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
- [ 3.977694] ahci 0000:01:00.0: version 3.0
- [ 3.978020] ahci 0000:01:00.0: SSS flag set, parallel bus scan disabled
- [ 3.978074] ahci 0000:01:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
- [ 3.978080] ahci 0000:01:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs
- [ 3.979130] scsi host0: ahci
- [ 3.979938] scsi host1: ahci
- [ 3.980844] ahci 0000:04:00.0: SSS flag set, parallel bus scan disabled
- [ 3.980911] ahci 0000:04:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl IDE mode
- [ 3.980919] ahci 0000:04:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs
- [ 3.982228] scsi host2: ahci
- [ 3.982888] scsi host3: ahci
- [ 3.985601] hub 1-0:1.0: USB hub found
- [ 3.985637] hub 1-0:1.0: 2 ports detected
- [ 4.010769] r8169 0000:02:00.0 enp2s0: renamed from eth0
- [ 4.013599] hub 2-0:1.0: USB hub found
- [ 4.013636] hub 2-0:1.0: 2 ports detected
- [ 4.038860] r8169 0000:03:00.0 enp3s0: renamed from eth1
- [ 4.041646] hub 3-0:1.0: USB hub found
- [ 4.041682] hub 3-0:1.0: 2 ports detected
- [ 4.069582] hub 4-0:1.0: USB hub found
- [ 4.069619] hub 4-0:1.0: 2 ports detected
- [ 4.126392] scsi host4: ata_piix
- [ 4.126781] scsi host5: ata_piix
- [ 4.296402] usb 5-2: new high-speed USB device number 2 using ehci-pci
- [ 4.450697] usb 5-2: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice= 9.01
- [ 4.450702] usb 5-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
- [ 4.450705] usb 5-2: Product: USB2.0 Hub
- [ 4.451316] hub 5-2:1.0: USB hub found
- [ 4.451723] hub 5-2:1.0: 4 ports detected
- [ 4.463441] ata3.00: 312581808 sectors, multi 0: LBA48 NCQ (depth 32), AA
- [ 4.469460] ata3.00: configured for UDMA/133
- [ 4.925383] usb 4-2: new low-speed USB device number 2 using uhci_hcd
- [ 5.173742] ata1.15: Port Multiplier 1.2, 0x197b:0x575f r0, 15 ports, feat 0x5/0xf
- [ 5.293381] usb 5-2.1: new high-speed USB device number 4 using ehci-pci
- [ 5.326423] usb 4-2: New USB device found, idVendor=0dc6, idProduct=3401, bcdDevice= 1.03
- [ 5.326428] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 5.326431] usb 4-2: Product: SCISSORS Keyboard
- [ 5.326434] usb 4-2: Manufacturer:
- [ 5.344780] hidraw: raw HID events driver (C) Jiri Kosina
- [ 5.367798] usbcore: registered new interface driver usbhid
- [ 5.367801] usbhid: USB HID core driver
- [ 5.373213] input: SCISSORS Keyboard as /devices/pci0000:00/0000:00:1d.3/usb4/4-2/4-2:1.0/0003:0DC6:3401.0001/input/input3
- [ 5.401707] usb 5-2.1: New USB device found, idVendor=0409, idProduct=005a, bcdDevice= 1.00
- [ 5.401712] usb 5-2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 5.402162] hub 5-2.1:1.0: USB hub found
- [ 5.402322] hub 5-2.1:1.0: 4 ports detected
- [ 5.429752] hid-generic 0003:0DC6:3401.0001: input,hidraw0: USB HID v1.00 Keyboard [ SCISSORS Keyboard] on usb-0000:00:1d.3-2/input0
- [ 5.689383] usb 5-2.1.1: new high-speed USB device number 5 using ehci-pci
- [ 6.013949] usb 5-2.1.1: New USB device found, idVendor=046d, idProduct=0825, bcdDevice= 0.10
- [ 6.013954] usb 5-2.1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=2
- [ 6.013957] usb 5-2.1.1: SerialNumber: C84D6920
- [ 6.047687] random: fast init done
- [ 6.093382] usb 5-2.1.4: new high-speed USB device number 6 using ehci-pci
- [ 6.418073] usb 5-2.1.4: New USB device found, idVendor=046d, idProduct=081b, bcdDevice= 0.10
- [ 6.418078] usb 5-2.1.4: New USB device strings: Mfr=0, Product=0, SerialNumber=2
- [ 6.418081] usb 5-2.1.4: SerialNumber: 6500FE00
- [ 6.762747] ata1.04: failed to write SCR 2 (Emask=0x100)
- [ 6.762750] ata1.04: COMRESET failed (errno=-5)
- [ 6.762834] ata1.04: failed to read SCR 0 (Emask=0x40)
- [ 18.391702] ata1.00: failed to read SCR 0 (Emask=0x100)
- [ 18.391705] ata1.00: COMRESET failed (errno=-5)
- [ 18.391785] ata1.00: failed to read SCR 0 (Emask=0x40)
- [ 29.691487] ata1.00: failed to read SCR 0 (Emask=0x100)
- [ 29.691490] ata1.00: COMRESET failed (errno=-5)
- [ 29.691570] ata1.00: failed to read SCR 0 (Emask=0x40)
- [ 40.909473] ata1.00: failed to read SCR 0 (Emask=0x100)
- [ 40.909476] ata1.00: COMRESET failed (errno=-5)
- [ 40.909556] ata1.00: failed to read SCR 0 (Emask=0x40)
- [ 52.280950] ata1.00: failed to write SCR 1 (Emask=0x100)
- [ 52.280953] ata1.00: failed to clear SError.N (errno=-5)
- [ 53.473681] ata1.15: failed to read PMP GSCR[64] (Emask=0x100)
- [ 53.473780] ata1.15: PMP revalidation failed (errno=-5)
- [ 60.216947] ata1.00: failed to read SCR 0 (Emask=0x100)
- [ 60.216951] ata1.00: failed to write SCR 1 (Emask=0x40)
- [ 60.216953] ata1.00: failed to clear SError.N (errno=-5)
- [ 61.663472] ata1.00: failed to read SCR 0 (Emask=0x100)
- [ 61.663476] ata1.00: COMRESET failed (errno=-5)
- [ 61.663556] ata1.00: failed to write SCR 1 (Emask=0x40)
- [ 61.663558] ata1.00: failed to clear SError.N (errno=-5)
- [ 65.877391] ata1.15: qc timeout (cmd 0xe4)
- [ 65.877408] ata1.15: failed to read PMP GSCR[0] (Emask=0x4)
- [ 65.877503] ata1.15: PMP revalidation failed (errno=-5)
- [ 69.368831] ata1.00: failed to read SCR 0 (Emask=0x100)
- [ 69.368835] ata1.00: COMRESET failed (errno=-5)
- [ 69.368914] ata1.00: failed to write SCR 1 (Emask=0x40)
- [ 69.368917] ata1.00: failed to clear SError.N (errno=-5)
- [ 69.369004] ata1: failed to recover PMP after 5 tries, giving up
- [ 69.369101] ata1.15: Port Multiplier detaching
- [ 69.369112] ata1.00: disabled
- [ 70.561413] ata1: EH complete
- [ 70.876313] scsi 2:0:0:0: Direct-Access ATA ST160LM003 HN-M1 0001 PQ: 0 ANSI: 5
- [ 70.886775] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
- [ 70.886782] sd 2:0:0:0: [sda] 4096-byte physical blocks
- [ 70.886814] sd 2:0:0:0: [sda] Write Protect is off
- [ 70.886820] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 70.886875] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 71.297240] sda: sda1 sda2 sda3 sda4
- [ 71.298609] sd 2:0:0:0: [sda] Attached SCSI disk
- [ 71.353411] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 71.359351] ata4.00: ATA-8: ST160LM003 HN-M160MBB, 2AR10001, max UDMA/133
- [ 71.359355] ata4.00: 312581808 sectors, multi 0: LBA48 NCQ (depth 32), AA
- [ 71.365320] ata4.00: configured for UDMA/133
- [ 71.365706] scsi 3:0:0:0: Direct-Access ATA ST160LM003 HN-M1 0001 PQ: 0 ANSI: 5
- [ 71.366347] sd 3:0:0:0: [sdb] 312581808 512-byte logical blocks: (160 GB/149 GiB)
- [ 71.366354] sd 3:0:0:0: [sdb] 4096-byte physical blocks
- [ 71.366389] sd 3:0:0:0: [sdb] Write Protect is off
- [ 71.366395] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
- [ 71.366448] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 71.760513] sdb: sdb1 sdb2 sdb3 sdb4
- [ 71.761945] sd 3:0:0:0: [sdb] Attached SCSI disk
- [ 73.049491] md/raid1:md0: active with 2 out of 2 mirrors
- [ 73.049547] md0: detected capacity change from 0 to 99932438528
- [ 73.078218] random: crng init done
- [ 73.086159] md/raid1:md3: active with 2 out of 2 mirrors
- [ 73.086220] md3: detected capacity change from 0 to 49966743552
- [ 73.833574] raid6: sse2x1 gen() 261 MB/s
- [ 73.901399] raid6: sse2x1 xor() 856 MB/s
- [ 73.969371] raid6: sse2x2 gen() 682 MB/s
- [ 74.037362] raid6: sse2x2 xor() 1406 MB/s
- [ 74.105395] raid6: sse2x4 gen() 1147 MB/s
- [ 74.173363] raid6: sse2x4 xor() 1443 MB/s
- [ 74.173368] raid6: using algorithm sse2x4 gen() 1147 MB/s
- [ 74.173370] raid6: .... xor() 1443 MB/s, rmw enabled
- [ 74.173373] raid6: using ssse3x2 recovery algorithm
- [ 74.176510] xor: measuring software checksum speed
- [ 74.213361] prefetch64-sse: 5583.000 MB/sec
- [ 74.253360] generic_sse: 5071.000 MB/sec
- [ 74.253363] xor: using function: prefetch64-sse (5583.000 MB/sec)
- [ 74.256058] async_tx: api initialized (async)
- [ 74.358061] PM: Image not found (code -22)
- [ 74.765172] cryptd: max_cpu_qlen set to 1000
- [ 75.036819] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null)
- [ 78.488035] systemd[1]: Inserted module 'autofs4'
- [ 79.220676] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
- [ 79.237515] systemd[1]: Detected architecture x86-64.
- [ 79.370970] systemd[1]: Set hostname to <miraculix>.
- [ 81.725123] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
- [ 81.754761] systemd[1]: Listening on RPCbind Server Activation Socket.
- [ 81.755289] systemd[1]: Listening on fsck to fsckd communication Socket.
- [ 82.550323] lp: driver loaded but no devices found
- [ 82.662864] RPC: Registered named UNIX socket transport module.
- [ 82.662867] RPC: Registered udp transport module.
- [ 82.662869] RPC: Registered tcp transport module.
- [ 82.662871] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 82.769887] ppdev: user-space parallel port driver
- [ 82.784962] EXT4-fs (md0): re-mounted. Opts: errors=remount-ro
- [ 82.855878] parport_pc 00:07: reported by Plug and Play ACPI
- [ 82.856001] parport0: PC-style at 0x378, irq 5 [PCSPP,TRISTATE]
- [ 82.949571] lp0: using parport0 (interrupt-driven).
- [ 83.202018] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
- [ 84.798847] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
- [ 84.798944] ACPI: Power Button [PWRB]
- [ 84.799435] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
- [ 84.799484] ACPI: Power Button [PWRF]
- [ 84.908867] input: PC Speaker as /devices/platform/pcspkr/input/input7
- [ 84.924733] EFI Variables Facility v0.08 2004-May-17
- [ 85.161087] pstore: Using compression: deflate
- [ 85.161126] pstore: Registered efi as persistent store backend
- [ 85.226301] iTCO_vendor_support: vendor-support=0
- [ 85.386726] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
- [ 85.386892] iTCO_wdt: Found a NM10 TCO device (Version=2, TCOBASE=0x0460)
- [ 85.387266] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
- [ 85.388003] sd 2:0:0:0: Attached scsi generic sg0 type 0
- [ 85.388890] sd 3:0:0:0: Attached scsi generic sg1 type 0
- [ 86.410225] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
- [ 86.410581] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
- [ 86.410823] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
- [ 86.410826] [drm] No driver support for vblank timestamp query.
- [ 86.850284] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
- [ 86.942052] checking generic (cf800000 1e0000) vs hw (cf800000 7bf000)
- [ 86.942057] fb: switching to psbdrmfb from EFI VGA
- [ 86.942234] Console: switching to colour dummy device 80x25
- [ 86.946476] fbcon: psbdrmfb (fb0) is primary device
- [ 86.973513] media: Linux media interface: v0.10
- [ 87.140472] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC662 rev1: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
- [ 87.140479] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
- [ 87.140483] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
- [ 87.140485] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
- [ 87.140489] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0
- [ 87.140491] snd_hda_codec_realtek hdaudioC0D0: inputs:
- [ 87.140496] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
- [ 87.140499] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
- [ 87.140502] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
- [ 87.225562] videodev: Linux video capture interface: v2.00
- [ 87.413864] input: HDA Intel HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
- [ 87.897323] Console: switching to colour frame buffer device 128x48
- [ 87.905201] gma500 0000:00:02.0: fb0: psbdrmfb frame buffer device
- [ 87.921650] [drm] Initialized gma500 1.0.0 20140314 for 0000:00:02.0 on minor 0
- [ 87.952541] usb 5-2.1.1: set resolution quirk: cval->res = 384
- [ 88.074555] uvcvideo: Found UVC 1.00 device <unnamed> (046d:0825)
- [ 88.111877] uvcvideo 5-2.1.1:1.0: Entity type for entity Extension 4 was not initialized!
- [ 88.111887] uvcvideo 5-2.1.1:1.0: Entity type for entity Extension 6 was not initialized!
- [ 88.111894] uvcvideo 5-2.1.1:1.0: Entity type for entity Extension 7 was not initialized!
- [ 88.111900] uvcvideo 5-2.1.1:1.0: Entity type for entity Processing 2 was not initialized!
- [ 88.111907] uvcvideo 5-2.1.1:1.0: Entity type for entity Extension 3 was not initialized!
- [ 88.111913] uvcvideo 5-2.1.1:1.0: Entity type for entity Camera 1 was not initialized!
- [ 88.112231] input: UVC Camera (046d:0825) as /devices/pci0000:00/0000:00:1d.7/usb5/5-2/5-2.1/5-2.1.1/5-2.1.1:1.0/input/input10
- [ 88.984919] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
- [ 89.023276] Adding 9180156k swap on /dev/sda4. Priority:-2 extents:1 across:9180156k FS
- [ 89.115847] usb 5-2.1.4: set resolution quirk: cval->res = 384
- [ 89.116283] usbcore: registered new interface driver snd-usb-audio
- [ 89.116332] uvcvideo: Found UVC 1.00 device <unnamed> (046d:081b)
- [ 89.140630] Adding 9180156k swap on /dev/sdb4. Priority:-3 extents:1 across:9180156k FS
- [ 89.162209] uvcvideo 5-2.1.4:1.0: Entity type for entity Extension 4 was not initialized!
- [ 89.162218] uvcvideo 5-2.1.4:1.0: Entity type for entity Extension 6 was not initialized!
- [ 89.162224] uvcvideo 5-2.1.4:1.0: Entity type for entity Extension 7 was not initialized!
- [ 89.162229] uvcvideo 5-2.1.4:1.0: Entity type for entity Processing 2 was not initialized!
- [ 89.162235] uvcvideo 5-2.1.4:1.0: Entity type for entity Extension 3 was not initialized!
- [ 89.162241] uvcvideo 5-2.1.4:1.0: Entity type for entity Camera 1 was not initialized!
- [ 89.162540] input: UVC Camera (046d:081b) as /devices/pci0000:00/0000:00:1d.7/usb5/5-2/5-2.1/5-2.1.4/5-2.1.4:1.0/input/input11
- [ 89.162816] usbcore: registered new interface driver uvcvideo
- [ 89.162819] USB Video Class driver (1.1.1)
- [ 90.011754] EXT4-fs (md3): mounted filesystem with ordered data mode. Opts: (null)
- [ 173.907825] audit: type=1400 audit(1596312251.952:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=472 comm="apparmor_parser"
- [ 173.907842] audit: type=1400 audit(1596312251.952:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=472 comm="apparmor_parser"
- [ 173.948095] audit: type=1400 audit(1596312251.992:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=469 comm="apparmor_parser"
- [ 173.948114] audit: type=1400 audit(1596312251.992:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=469 comm="apparmor_parser"
- [ 173.948126] audit: type=1400 audit(1596312251.992:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=469 comm="apparmor_parser"
- [ 174.037912] audit: type=1400 audit(1596312252.084:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=470 comm="apparmor_parser"
- [ 174.068748] audit: type=1400 audit(1596312252.112:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=474 comm="apparmor_parser"
- [ 174.068765] audit: type=1400 audit(1596312252.112:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=474 comm="apparmor_parser"
- [ 174.068776] audit: type=1400 audit(1596312252.112:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd//third_party" pid=474 comm="apparmor_parser"
- [ 174.528232] r8169 0000:02:00.0: firmware: direct-loading firmware rtl_nic/rtl8168e-3.fw
- [ 174.528520] RTL8211E Gigabit Ethernet r8169-200:00: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=r8169-200:00, irq=IGNORE)
- [ 1094.965539] ata1.15: failed to read PMP GSCR[2] (Emask=0x100)
- [ 1101.309733] ata1.15: Port Multiplier 1.2, 0x197b:0x575f r0, 15 ports, feat 0x5/0xf
- [ 1102.530765] ata1.02: failed to read SCR 0 (Emask=0x100)
- [ 1102.530769] ata1.02: COMRESET failed (errno=-5)
- [ 1102.534087] ata1.02: failed to read SCR 0 (Emask=0x40)
- [ 1116.757557] ata1.15: qc timeout (cmd 0xe4)
- [ 1116.757576] ata1.15: failed to read PMP GSCR[0] (Emask=0x4)
- [ 1116.760884] ata1.15: PMP revalidation failed (errno=-5)
- [ 1120.074770] ata1.00: failed to read SCR 0 (Emask=0x100)
- [ 1120.074775] ata1.00: COMRESET failed (errno=-5)
- [ 1120.078116] ata1.00: failed to read SCR 0 (Emask=0x40)
- [ 1132.205226] ata1.02: failed to read SCR 0 (Emask=0x100)
- [ 1132.205230] ata1.02: COMRESET failed (errno=-5)
- [ 1132.208472] ata1.02: failed to read SCR 0 (Emask=0x40)
- [ 1143.297554] ata1.15: failed to read PMP GSCR[2] (Emask=0x100)
- [ 1143.300768] ata1.15: PMP revalidation failed (errno=-5)
- [ 1149.901454] ata1.00: failed to read SCR 2 (Emask=0x100)
- [ 1149.901458] ata1.00: COMRESET failed (errno=-5)
- [ 1149.904693] ata1.00: failed to read SCR 0 (Emask=0x40)
- [ 1160.961468] ata1.15: failed to read PMP GSCR[0] (Emask=0x100)
- [ 1160.964757] ata1.15: PMP revalidation failed (errno=-5)
- [ 1170.522753] ata1.09: failed to read SCR 2 (Emask=0x100)
- [ 1170.522756] ata1.09: COMRESET failed (errno=-5)
- [ 1170.526079] ata1.09: failed to read SCR 0 (Emask=0x40)
- [ 1182.207490] ata1.00: failed to read SCR 0 (Emask=0x100)
- [ 1182.207493] ata1.00: COMRESET failed (errno=-5)
- [ 1182.210736] ata1.00: failed to read SCR 0 (Emask=0x40)
- [ 1193.435688] ata1.00: failed to read SCR 0 (Emask=0x100)
- [ 1193.435692] ata1.00: COMRESET failed (errno=-5)
- [ 1193.438911] ata1.00: failed to write SCR 1 (Emask=0x40)
- [ 1193.438914] ata1.00: failed to clear SError.N (errno=-5)
- [ 1194.913043] ata1.00: failed to read SCR 0 (Emask=0x100)
- [ 1194.913047] ata1.00: COMRESET failed (errno=-5)
- [ 1194.916224] ata1.00: failed to write SCR 1 (Emask=0x40)
- [ 1194.916227] ata1.00: failed to clear SError.N (errno=-5)
- [ 1196.358381] ata1.00: failed to read SCR 0 (Emask=0x100)
- [ 1196.358385] ata1.00: COMRESET failed (errno=-5)
- [ 1196.361522] ata1.00: failed to write SCR 1 (Emask=0x40)
- [ 1196.361525] ata1.00: failed to clear SError.N (errno=-5)
- [ 1206.361976] ata1.15: softreset failed (1st FIS failed)
- [ 1207.791045] ata1.00: failed to read SCR 0 (Emask=0x100)
- [ 1207.791050] ata1.00: COMRESET failed (errno=-5)
- [ 1207.794157] ata1.00: failed to write SCR 1 (Emask=0x40)
- [ 1207.794162] ata1.00: failed to clear SError.N (errno=-5)
- [ 1207.797649] ata1: failed to recover PMP after 5 tries, giving up
- [ 1207.800720] ata1.15: Port Multiplier detaching
- [ 1207.800735] ata1.00: disabled
- [ 1208.993441] ata1: EH complete
- [15261.679287] perf: interrupt took too long (2518 > 2500), lowering kernel.perf_event_max_sample_rate to 79250
- [20230.235865] perf: interrupt took too long (3160 > 3147), lowering kernel.perf_event_max_sample_rate to 63250
- [31241.111546] perf: interrupt took too long (3976 > 3950), lowering kernel.perf_event_max_sample_rate to 50250
- [58769.981386] usb 5-1: new high-speed USB device number 7 using ehci-pci
- [58770.138526] usb 5-1: New USB device found, idVendor=152d, idProduct=0567, bcdDevice= 2.05
- [58770.138531] usb 5-1: New USB device strings: Mfr=10, Product=11, SerialNumber=5
- [58770.138535] usb 5-1: Product: USB to ATA/ATAPI Bridge
- [58770.138538] usb 5-1: Manufacturer: JMicron
- [58770.138541] usb 5-1: SerialNumber: 152D00539000
- [58770.226297] usb-storage 5-1:1.0: USB Mass Storage device detected
- [58770.226654] usb-storage 5-1:1.0: Quirks match for vid 152d pid 0567: 5000000
- [58770.226774] scsi host6: usb-storage 5-1:1.0
- [58770.227039] usbcore: registered new interface driver usb-storage
- [58770.251117] usbcore: registered new interface driver uas
- [58771.254237] scsi 6:0:0:0: Direct-Access WDC WD20 EFRX-68EUZN0 0125 PQ: 0 ANSI: 6
- [58771.254724] scsi 6:0:0:1: Direct-Access WDC WD20 EFRX-68EUZN0 0125 PQ: 0 ANSI: 6
- [58771.255503] sd 6:0:0:0: Attached scsi generic sg2 type 0
- [58771.256236] sd 6:0:0:1: Attached scsi generic sg3 type 0
- [58771.256494] sd 6:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
- [58771.257211] sd 6:0:0:0: [sdc] Write Protect is off
- [58771.257216] sd 6:0:0:0: [sdc] Mode Sense: 67 00 10 08
- [58771.262642] sd 6:0:0:1: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
- [58771.263271] sd 6:0:0:0: [sdc] No Caching mode page found
- [58771.267192] sd 6:0:0:0: [sdc] Assuming drive cache: write through
- [58771.272874] sd 6:0:0:1: [sdd] Write Protect is off
- [58771.272884] sd 6:0:0:1: [sdd] Mode Sense: 67 00 10 08
- [58771.277578] sd 6:0:0:1: [sdd] No Caching mode page found
- [58771.281522] sd 6:0:0:1: [sdd] Assuming drive cache: write through
- [58771.900146] sdc: sdc1 sdc2
- [58772.515079] sdd: sdd1 sdd2
- [58772.517650] sd 6:0:0:0: [sdc] Attached SCSI disk
- [58772.520407] sd 6:0:0:1: [sdd] Attached SCSI disk
- [58772.875109] md/raid1:md2: active with 2 out of 2 mirrors
- [58772.875195] md2: detected capacity change from 0 to 711773478912
- [58772.894395] md/raid1:md1: active with 2 out of 2 mirrors
- [58772.894472] md1: detected capacity change from 0 to 1288355971072
- [59081.503300] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
- [59082.762296] EXT4-fs (md1): mounted filesystem with ordered data mode. Opts: (null)
- [59082.812258] EXT4-fs (md2): mounted filesystem with ordered data mode. Opts: (null)
- [59450.386770] NFSD: starting 90-second grace period (net f0000098)
- [59526.811943] perf: interrupt took too long (4971 > 4970), lowering kernel.perf_event_max_sample_rate to 40000
- [60021.703309] perf: interrupt took too long (6219 > 6213), lowering kernel.perf_event_max_sample_rate to 32000
- [61349.097283] perf: interrupt took too long (7810 > 7773), lowering kernel.perf_event_max_sample_rate to 25500
Quellcode
Hier kannst du den Code kopieren und ihn in deinen bevorzugten Editor einfügen. PASTEBIN_DOWNLOAD_SNIPPET_EXPLAIN