debianforum.de

dmesg

SNIPPET_TEXT:

1. root@server:/home/admini# dmesg
2. [    0.000000] Linux version 4.19.0-11-686-pae (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP Debian 4.19.146-1 (2020-09-17)
3. [    0.000000] x86/fpu: x87 FPU will use FXSAVE
4. [    0.000000] BIOS-provided physical RAM map:
5. [    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
6. [    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
7. [    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
8. [    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007efeffff] usable
9. [    0.000000] BIOS-e820: [mem 0x000000007eff0000-0x000000007eff2fff] ACPI NVS
10. [    0.000000] BIOS-e820: [mem 0x000000007eff3000-0x000000007effffff] ACPI data
11. [    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
12. [    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
13. [    0.000000] BIOS-e820: [mem 0x00000000ffff0000-0x00000000ffffffff] reserved
14. [    0.000000] Notice: NX (Execute Disable) protection missing in CPU!
15. [    0.000000] SMBIOS 2.2 present.
16. [    0.000000] DMI: ASUS A7V8X-MX SE/A7V8X-MX SE, BIOS ASUS A7V8X-MX SE ACPI BIOS Revision 1007-001 09/24/2004
17. [    0.000000] tsc: Fast TSC calibration using PIT
18. [    0.000000] tsc: Detected 1792.183 MHz processor
19. [    0.013446] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
20. [    0.013452] e820: remove [mem 0x000a0000-0x000fffff] usable
21. [    0.013462] last_pfn = 0x7eff0 max_arch_pfn = 0x1000000
22. [    0.013477] MTRR default type: uncachable
23. [    0.013479] MTRR fixed ranges enabled:
24. [    0.013483]   00000-9FFFF write-back
25. [    0.013485]   A0000-BFFFF uncachable
26. [    0.013487]   C0000-C7FFF write-protect
27. [    0.013490]   C8000-FFFFF uncachable
28. [    0.013491] MTRR variable ranges enabled:
29. [    0.013495]   0 base 000000000 mask F80000000 write-back
30. [    0.013497]   1 base 07F000000 mask FFF000000 uncachable
31. [    0.013500]   2 base 0E6000000 mask FFFC00000 write-combining
32. [    0.013501]   3 disabled
33. [    0.013503]   4 disabled
34. [    0.013504]   5 disabled
35. [    0.013505]   6 disabled
36. [    0.013507]   7 disabled
37. [    0.014028] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
38. [    0.018192] found SMP MP-table at [mem 0x000f54a0-0x000f54af]
39. [    0.034099] initial memory mapped: [mem 0x00000000-0x0dffffff]
40. [    0.034287] RAMDISK: [mem 0x35693000-0x36b40fff]
41. [    0.034298] ACPI: Early table checksum verification disabled
42. [    0.038189] ACPI: RSDP 0x00000000000F6EE0 000014 (v00 KM400A)
43. [    0.038196] ACPI: RSDT 0x000000007EFF3000 00002C (v01 KM400A AWRDACPI 42302E31 AWRD 00000000)
44. [    0.038210] ACPI: FACP 0x000000007EFF3040 000074 (v01 KM400A AWRDACPI 42302E31 AWRD 00000000)
45. [    0.038224] ACPI: DSDT 0x000000007EFF30C0 004146 (v01 KM400A AWRDACPI 00001000 MSFT 0100000E)
46. [    0.038231] ACPI: FACS 0x000000007EFF0000 000040
47. [    0.038237] ACPI: APIC 0x000000007EFF7240 00005A (v01 KM400A AWRDACPI 42302E31 AWRD 00000000)
48. [    0.038259] ACPI: Local APIC address 0xfee00000
49. [    0.038268] 1151MB HIGHMEM available.
50. [    0.038272] 879MB LOWMEM available.
51. [    0.038273]   mapped low ram: 0 - 36ffe000
52. [    0.038275]   low ram: 0 - 36ffe000
53. [    0.038287] Zone ranges:
54. [    0.038289]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
55. [    0.038292]   Normal   [mem 0x0000000001000000-0x0000000036ffdfff]
56. [    0.038294]   HighMem  [mem 0x0000000036ffe000-0x000000007efeffff]
57. [    0.038297] Movable zone start for each node
58. [    0.038298] Early memory node ranges
59. [    0.038300]   node   0: [mem 0x0000000000001000-0x000000000009efff]
60. [    0.038302]   node   0: [mem 0x0000000000100000-0x000000007efeffff]
61. [    0.038306] Initmem setup node 0 [mem 0x0000000000001000-0x000000007efeffff]
62. [    0.038311] On node 0 totalpages: 520078
63. [    0.087856]   DMA zone: 40 pages used for memmap
64. [    0.087859]   DMA zone: 0 pages reserved
65. [    0.087861]   DMA zone: 3998 pages, LIFO batch:0
66. [    0.088250]   Normal zone: 2160 pages used for memmap
67. [    0.088252]   Normal zone: 221182 pages, LIFO batch:63
68. [    0.109395]   HighMem zone: 294898 pages, LIFO batch:63
69. [    0.137632] Using APIC driver default
70. [    0.137727] ACPI: PM-Timer IO Port: 0x408
71. [    0.137732] ACPI: Local APIC address 0xfee00000
72. [    0.137746] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
73. [    0.137782] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
74. [    0.137787] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
75. [    0.137792] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
76. [    0.137796] ACPI: IRQ0 used by override.
77. [    0.137798] ACPI: IRQ9 used by override.
78. [    0.137803] Using ACPI (MADT) for SMP configuration information
79. [    0.137810] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
80. [    0.137843] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
81. [    0.137846] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
82. [    0.137848] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
83. [    0.137850] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
84. [    0.137856] [mem 0x7f000000-0xfebfffff] available for PCI devices
85. [    0.137859] Booting paravirtualized kernel on bare hardware
86. [    0.137868] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
87. [    0.137899] random: get_random_bytes called from start_kernel+0x81/0x460 with crng_init=0
88. [    0.137914] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
89. [    0.138461] percpu: Embedded 30 pages/cpu s90572 r0 d32308 u122880
90. [    0.138474] pcpu-alloc: s90572 r0 d32308 u122880 alloc=30*4096
91. [    0.138477] pcpu-alloc: [0] 0
92. [    0.138515] Built 1 zonelists, mobility grouping on.  Total pages: 517878
93. [    0.138520] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-11-686-pae root=UUID=803ac4dd-0d7a-4a06-9e6e-d5427ebc9fb3 ro quiet
94. [    0.139811] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
95. [    0.140435] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
96. [    0.140471] Initializing CPU#0
97. [    0.140489] Initializing HighMem for node 0 (00036ffe:0007eff0)
98. [    0.301104] Initializing Movable for node 0 (00000000:00000000)
99. [    0.321400] Memory: 2026368K/2080312K available (6792K kernel code, 660K rwdata, 2084K rodata, 892K init, 464K bss, 53944K reserved, 0K cma-reserved, 1179592K highmem)
100. [    0.321411] virtual kernel memory layout:
101.                    fixmap  : 0xffd35000 - 0xfffff000   (2856 kB)
102.                  cpu_entry : 0xff400000 - 0xff8e1000   (4996 kB)
103.                    pkmap   : 0xff000000 - 0xff200000   (2048 kB)
104.                    vmalloc : 0xf77fe000 - 0xfeffe000   ( 120 MB)
105.                    lowmem  : 0xc0000000 - 0xf6ffe000   ( 879 MB)
106.                      .init : 0xcd963000 - 0xcda42000   ( 892 kB)
107.                      .data : 0xcd6a2278 - 0xcd953040   (2755 kB)
108.                      .text : 0xcd000000 - 0xcd6a2278   (6792 kB)
109. [    0.321413] Checking if this processor honours the WP bit even in supervisor mode...Ok.
110. [    0.321779] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
111. [    0.321785] ftrace: allocating 29780 entries in 59 pages
112. [    0.347144] rcu: Hierarchical RCU implementation.
113. [    0.347150] rcu:     RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=1.
114. [    0.347153] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
115. [    0.353074] NR_IRQS: 2304, nr_irqs: 256, preallocated irqs: 16
116. [    0.353441] CPU 0 irqstacks, hard=(ptrval) soft=(ptrval)
117. [    0.355946] Console: colour VGA+ 80x25
118. [    0.355966] console [tty0] enabled
119. [    0.355987] ACPI: Core revision 20180810
120. [    0.356207] APIC: Switch to symmetric I/O mode setup
121. [    0.356212] Enabling APIC mode:  Flat.  Using 1 I/O APICs
122. [    0.357555] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
123. [    0.376207] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x19d551151b5, max_idle_ns: 440795230724 ns
124. [    0.376240] Calibrating delay loop (skipped), value calculated using timer frequency.. 3584.36 BogoMIPS (lpj=7168732)
125. [    0.376246] pid_max: default: 32768 minimum: 301
126. [    0.376341] Security Framework initialized
127. [    0.376346] Yama: disabled by default; enable with sysctl kernel.yama.*
128. [    0.376422] AppArmor: AppArmor initialized
129. [    0.376472] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
130. [    0.376489] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
131. [    0.377084] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
132. [    0.377087] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
133. [    0.377092] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
134. [    0.377096] Spectre V2 : Spectre mitigation: LFENCE not serializing, switching to generic retpoline
135. [    0.377154] Spectre V2 : Mitigation: Full generic retpoline
136. [    0.377156] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
137. [    0.377158] Speculative Store Bypass: Vulnerable
138. [    0.383812] Freeing SMP alternatives memory: 24K
139. [    0.498509] smpboot: CPU0: AMD Athlon(tm) XP 2200+ (family: 0x6, model: 0x8, stepping: 0x1)
140. [    0.498904] mce: [Hardware Error]: Machine check events logged
141. [    0.498910] mce: [Hardware Error]: CPU 0: Machine Check: 0 Bank 2: f60020000002ffff
142. [    0.498964] mce: [Hardware Error]: TSC 0 ADDR ffc3affce
143. [    0.499007] mce: [Hardware Error]: PROCESSOR 2:681 TIME 1602216674 SOCKET 0 APIC 0 microcode 0
144. [    0.499054] mce: [Hardware Error]: Machine check events logged
145. [    0.499056] mce: [Hardware Error]: CPU 0: Machine Check: 0 Bank 3: e600000000001008
146. [    0.499099] mce: [Hardware Error]: TSC 0 ADDR fff7dbfff
147. [    0.499140] mce: [Hardware Error]: PROCESSOR 2:681 TIME 1602216674 SOCKET 0 APIC 0 microcode 0
148. [    0.499325] Performance Events: AMD PMU driver.
149. [    0.499337] ... version:                0
150. [    0.499338] ... bit width:              48
151. [    0.499339] ... generic registers:      4
152. [    0.499340] ... value mask:             0000ffffffffffff
153. [    0.499342] ... max period:             00007fffffffffff
154. [    0.499342] ... fixed-purpose events:   0
155. [    0.499343] ... event mask:             000000000000000f
156. [    0.499482] rcu: Hierarchical SRCU implementation.
157. [    0.500215] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
158. [    0.500215] smp: Bringing up secondary CPUs ...
159. [    0.500215] smp: Brought up 1 node, 1 CPU
160. [    0.500215] smpboot: Max logical packages: 1
161. [    0.500215] smpboot: Total of 1 processors activated (3584.36 BogoMIPS)
162. [    0.500215] devtmpfs: initialized
163. [    0.500215] PM: Registering ACPI NVS region [mem 0x7eff0000-0x7eff2fff] (12288 bytes)
164. [    0.500215] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
165. [    0.500215] futex hash table entries: 256 (order: 2, 16384 bytes)
166. [    0.500215] pinctrl core: initialized pinctrl subsystem
167. [    0.500412] NET: Registered protocol family 16
168. [    0.500624] audit: initializing netlink subsys (disabled)
169. [    0.501102] cpuidle: using governor ladder
170. [    0.501105] cpuidle: using governor menu
171. [    0.501190] ACPI: bus type PCI registered
172. [    0.501194] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
173. [    0.501300] PCI: Using configuration type 1 for base access
174. [    0.503183] audit: type=2000 audit(1602216674.144:1): state=initialized audit_enabled=0 res=1
175. [    0.503487] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
176. [    0.504281] ACPI: Added _OSI(Module Device)
177. [    0.504284] ACPI: Added _OSI(Processor Device)
178. [    0.504285] ACPI: Added _OSI(3.0 _SCP Extensions)
179. [    0.504287] ACPI: Added _OSI(Processor Aggregator Device)
180. [    0.504290] ACPI: Added _OSI(Linux-Dell-Video)
181. [    0.504291] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
182. [    0.508178] ACPI: 1 ACPI AML tables successfully acquired and loaded
183. [    0.511347] ACPI: Interpreter enabled
184. [    0.511400] ACPI: (supports S0 S1 S3 S4 S5)
185. [    0.511404] ACPI: Using IOAPIC for interrupt routing
186. [    0.511480] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
187. [    0.511736] ACPI: Enabled 8 GPEs in block 00 to 0F
188. [    0.520639] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
189. [    0.520655] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
190. [    0.520666] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
191. [    0.520674] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
192. [    0.521051] PCI host bridge to bus 0000:00
193. [    0.521057] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
194. [    0.521060] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
195. [    0.521063] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
196. [    0.521066] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
197. [    0.521068] pci_bus 0000:00: root bus resource [mem 0x7f000000-0xfebfffff window]
198. [    0.521072] pci_bus 0000:00: root bus resource [bus 00-ff]
199. [    0.521095] pci 0000:00:00.0: [1106:3205] type 00 class 0x060000
200. [    0.521118] pci 0000:00:00.0: reg 0x10: [mem 0xe6000000-0xe63fffff pref]
201. [    0.521325] pci 0000:00:01.0: [1106:b198] type 01 class 0x060400
202. [    0.521378] pci 0000:00:01.0: supports D1
203. [    0.521511] pci 0000:00:09.0: [10ec:8139] type 00 class 0x020000
204. [    0.521531] pci 0000:00:09.0: reg 0x10: [io  0xd000-0xd0ff]
205. [    0.521541] pci 0000:00:09.0: reg 0x14: [mem 0xe6400000-0xe64000ff]
206. [    0.521602] pci 0000:00:09.0: supports D1 D2
207. [    0.521605] pci 0000:00:09.0: PME# supported from D1 D2 D3hot D3cold
208. [    0.521744] pci 0000:00:10.0: [1106:3038] type 00 class 0x0c0300
209. [    0.521788] pci 0000:00:10.0: reg 0x20: [io  0xd400-0xd41f]
210. [    0.521829] pci 0000:00:10.0: supports D1 D2
211. [    0.521831] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
212. [    0.521976] pci 0000:00:10.1: [1106:3038] type 00 class 0x0c0300
213. [    0.522021] pci 0000:00:10.1: reg 0x20: [io  0xd800-0xd81f]
214. [    0.522062] pci 0000:00:10.1: supports D1 D2
215. [    0.522064] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
216. [    0.522205] pci 0000:00:10.2: [1106:3038] type 00 class 0x0c0300
217. [    0.522249] pci 0000:00:10.2: reg 0x20: [io  0xdc00-0xdc1f]
218. [    0.522290] pci 0000:00:10.2: supports D1 D2
219. [    0.522292] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
220. [    0.522432] pci 0000:00:10.3: [1106:3104] type 00 class 0x0c0320
221. [    0.522451] pci 0000:00:10.3: reg 0x10: [mem 0xe6401000-0xe64010ff]
222. [    0.522517] pci 0000:00:10.3: supports D1 D2
223. [    0.522519] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
224. [    0.522664] pci 0000:00:11.0: [1106:3177] type 00 class 0x060100
225. [    0.522729] HPET not enabled in BIOS. You might try hpet=force boot option
226. [    0.522737] pci 0000:00:11.0: quirk: [io  0x0400-0x047f] claimed by vt8235 PM
227. [    0.522741] pci 0000:00:11.0: quirk: [io  0x5000-0x500f] claimed by vt8235 SMB
228. [    0.522889] pci 0000:00:11.1: [1106:0571] type 00 class 0x01018a
229. [    0.522937] pci 0000:00:11.1: reg 0x20: [io  0xe000-0xe00f]
230. [    0.522957] pci 0000:00:11.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
231. [    0.522959] pci 0000:00:11.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
232. [    0.522961] pci 0000:00:11.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
233. [    0.522963] pci 0000:00:11.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
234. [    0.523126] pci 0000:00:11.5: [1106:3059] type 00 class 0x040100
235. [    0.523146] pci 0000:00:11.5: reg 0x10: [io  0xe400-0xe4ff]
236. [    0.523216] pci 0000:00:11.5: supports D1 D2
237. [    0.523349] pci 0000:00:12.0: [1106:3065] type 00 class 0x020000
238. [    0.523369] pci 0000:00:12.0: reg 0x10: [io  0xec00-0xecff]
239. [    0.523378] pci 0000:00:12.0: reg 0x14: [mem 0xe6402000-0xe64020ff]
240. [    0.523440] pci 0000:00:12.0: supports D1 D2
241. [    0.523442] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
242. [    0.523605] pci_bus 0000:01: extended config space not accessible
243. [    0.523645] pci 0000:01:00.0: [1106:7205] type 00 class 0x030000
244. [    0.523660] pci 0000:01:00.0: reg 0x10: [mem 0xe0000000-0xe3ffffff pref]
245. [    0.523668] pci 0000:01:00.0: reg 0x14: [mem 0xe4000000-0xe4ffffff]
246. [    0.523697] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
247. [    0.523727] pci 0000:01:00.0: supports D1 D2
248. [    0.523813] pci 0000:00:01.0: PCI bridge to [bus 01]
249. [    0.523820] pci 0000:00:01.0:   bridge window [mem 0xe4000000-0xe5ffffff]
250. [    0.523824] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xe3ffffff pref]
251. [    0.523833] pci_bus 0000:00: on NUMA node 0
252. [    0.524153] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 *11 12)
253. [    0.524370] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 *10 11 12)
254. [    0.524552] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12) *5
255. [    0.524731] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 6 7 10 11 12)
256. [    0.524873] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
257. [    0.525005] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
258. [    0.525137] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
259. [    0.525269] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled.
260. [    0.525475] ACPI: PCI Interrupt Link [ALKA] (IRQs *20), disabled.
261. [    0.525661] ACPI: PCI Interrupt Link [ALKB] (IRQs *21)
262. [    0.525814] ACPI: PCI Interrupt Link [ALKC] (IRQs *22)
263. [    0.526002] ACPI: PCI Interrupt Link [ALKD] (IRQs *23)
264. [    0.527246] pci 0000:01:00.0: vgaarb: setting as boot VGA device
265. [    0.527253] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
266. [    0.527255] pci 0000:01:00.0: vgaarb: bridge control possible
267. [    0.527258] vgaarb: loaded
268. [    0.527435] EDAC MC: Ver: 3.0.0
269. [    0.527803] PCI: Using ACPI for IRQ routing
270. [    0.527809] PCI: pci_cache_line_size set to 32 bytes
271. [    0.527859] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
272. [    0.527863] e820: reserve RAM buffer [mem 0x7eff0000-0x7fffffff]
273. [    0.528418] clocksource: Switched to clocksource tsc-early
274. [    0.559239] VFS: Disk quotas dquot_6.6.0
275. [    0.559286] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
276. [    0.559588] AppArmor: AppArmor Filesystem Enabled
277. [    0.559655] pnp: PnP ACPI init
278. [    0.560199] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved
279. [    0.560203] system 00:00: [mem 0x000f0000-0x000f7fff] could not be reserved
280. [    0.560206] system 00:00: [mem 0x000f8000-0x000fbfff] could not be reserved
281. [    0.560209] system 00:00: [mem 0x000fc000-0x000fffff] could not be reserved
282. [    0.560212] system 00:00: [mem 0x7eff0000-0x7effffff] could not be reserved
283. [    0.560216] system 00:00: [mem 0xffff0000-0xffffffff] has been reserved
284. [    0.560219] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
285. [    0.560222] system 00:00: [mem 0x00100000-0x7efeffff] could not be reserved
286. [    0.560225] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
287. [    0.560228] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
288. [    0.560230] system 00:00: [mem 0xfff80000-0xfffeffff] has been reserved
289. [    0.560247] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
290. [    0.560357] system 00:01: [io  0x0400-0x047f] has been reserved
291. [    0.560361] system 00:01: [io  0x5000-0x500f] has been reserved
292. [    0.560371] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
293. [    0.560968] system 00:02: [io  0x04d0-0x04d1] has been reserved
294. [    0.560971] system 00:02: [io  0x0294-0x0297] has been reserved
295. [    0.560981] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
296. [    0.561061] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
297. [    0.561255] pnp 00:04: [dma 2]
298. [    0.561313] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
299. [    0.561650] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
300. [    0.562118] pnp 00:06: [dma 3]
301. [    0.562203] pnp 00:06: Plug and Play ACPI device, IDs PNP0401 (active)
302. [    0.562637] pnp 00:07: Plug and Play ACPI device, IDs PNPb02f (active)
303. [    0.562746] pnp: PnP ACPI: found 8 devices
304. [    0.562752] PnPBIOS: Disabled
305. [    0.600951] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
306. [    0.601018] pci 0000:01:00.0: BAR 6: assigned [mem 0xe5000000-0xe500ffff pref]
307. [    0.601025] pci 0000:00:01.0: PCI bridge to [bus 01]
308. [    0.601033] pci 0000:00:01.0:   bridge window [mem 0xe4000000-0xe5ffffff]
309. [    0.601038] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xe3ffffff pref]
310. [    0.601046] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
311. [    0.601049] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
312. [    0.601052] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
313. [    0.601055] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window]
314. [    0.601058] pci_bus 0000:00: resource 8 [mem 0x7f000000-0xfebfffff window]
315. [    0.601061] pci_bus 0000:01: resource 1 [mem 0xe4000000-0xe5ffffff]
316. [    0.601063] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xe3ffffff pref]
317. [    0.601264] NET: Registered protocol family 2
318. [    0.601662] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)
319. [    0.601682] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
320. [    0.601757] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
321. [    0.601891] TCP: Hash tables configured (established 8192 bind 8192)
322. [    0.602036] UDP hash table entries: 512 (order: 2, 16384 bytes)
323. [    0.602066] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
324. [    0.602215] NET: Registered protocol family 1
325. [    0.602239] NET: Registered protocol family 44
326. [    0.602270] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
327. [    0.602761] PCI Interrupt Link [ALKB] enabled at IRQ 21
328. [    0.603855] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
329. [    0.603859] PCI: CLS 32 bytes, default 32
330. [    0.604071] Unpacking initramfs...
331. [    1.421854] Freeing initrd memory: 21176K
332. [    1.423312] Initialise system trusted keyrings
333. [    1.423343] Key type blacklist registered
334. [    1.423492] workingset: timestamp_bits=14 max_order=19 bucket_order=5
335. [    1.426452] zbud: loaded
336. [    2.436364] tsc: Refined TSC clocksource calibration: 1792.282 MHz
337. [    2.436376] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x19d5ae9be39, max_idle_ns: 440795243119 ns
338. [    2.436402] clocksource: Switched to clocksource tsc
339. [    2.821674] Key type asymmetric registered
340. [    2.821680] Asymmetric key parser 'x509' registered
341. [    2.821717] bounce: pool size: 64 pages
342. [    2.821786] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
343. [    2.821885] io scheduler noop registered
344. [    2.821887] io scheduler deadline registered
345. [    2.822033] io scheduler cfq registered (default)
346. [    2.822036] io scheduler mq-deadline registered
347. [    2.822372] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
348. [    2.822431] tsc: Marking TSC unstable due to TSC halts in idle
349. [    2.822825] clocksource: Switched to clocksource acpi_pm
350. [    2.822907] isapnp: Scanning for PnP cards...
351. [    3.176675] isapnp: No Plug & Play device found
352. [    3.176888] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
353. [    3.197354] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
354. [    3.198169] Linux agpgart interface v0.103
355. [    3.198358] agpgart: Detected VIA KM400/KM400A chipset
356. [    3.198586] agpgart-via 0000:00:00.0: can't determine aperture size
357. [    3.198677] agpgart-via 0000:00:00.0: agp_backend_initialize() failed
358. [    3.198706] agpgart-via: probe of 0000:00:00.0 failed with error -22
359. [    3.199078] i8042: PNP: No PS/2 controller found.
360. [    3.199079] i8042: Probing ports directly.
361. [    3.199637] serio: i8042 KBD port at 0x60,0x64 irq 1
362. [    3.199652] serio: i8042 AUX port at 0x60,0x64 irq 12
363. [    3.199973] mousedev: PS/2 mouse device common for all mice
364. [    3.200074] rtc_cmos 00:03: RTC can wake from S4
365. [    3.200374] rtc_cmos 00:03: registered as rtc0
366. [    3.200420] rtc_cmos 00:03: alarms up to one year, y3k, 242 bytes nvram
367. [    3.200467] ledtrig-cpu: registered to indicate activity on CPUs
368. [    3.201452] NET: Registered protocol family 10
369. [    3.225292] Segment Routing with IPv6
370. [    3.225352] mip6: Mobile IPv6
371. [    3.225358] NET: Registered protocol family 17
372. [    3.225445] mpls_gso: MPLS GSO support
373. [    3.225663] mce: Using 4 MCE banks
374. [    3.225702] Using IPI No-Shortcut mode
375. [    3.226031] registered taskstats version 1
376. [    3.226033] Loading compiled-in X.509 certificates
377. [    3.544770] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
378. [    3.544825] Loaded X.509 cert 'Debian Secure Boot Signer 2020: 00b55eb3b9'
379. [    3.544904] zswap: loaded using pool lzo/zbud
380. [    3.545008] AppArmor: AppArmor sha1 policy hashing enabled
381. [    3.545495] rtc_cmos 00:03: setting system clock to 2020-10-09 04:11:17 UTC (1602216677)
382. [    3.545558] Unstable clock detected, switching default tracing clock to "global"
383.               If you want to keep using the local clock, then add:
384.                 "trace_clock=local"
385.               on the kernel command line
386. [    3.548810] Freeing unused kernel image memory: 892K
387. [    3.560332] Write protecting the kernel text: 6796k
388. [    3.560422] Write protecting the kernel read-only data: 2088k
389. [    3.560427] Run /init as init process
390. [    3.823255] Floppy drive(s): fd0 is 1.44M
391. [    3.844301] FDC 0 is a post-1991 82077
392. [    3.898611] via_rhine: v1.10-LK1.5.1 2010-10-09 Written by Donald Becker
393. [    3.899121] PCI Interrupt Link [ALKD] enabled at IRQ 23
394. [    3.899633] via-rhine 0000:00:12.0 eth0: VIA Rhine II at (ptrval), 00:00:00:00:00:10, IRQ 23
395. [    3.900470] via-rhine 0000:00:12.0 eth0: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000
396. [    3.912200] thermal LNXTHERM:00: registered as thermal_zone0
397. [    3.912206] ACPI: Thermal Zone [THRM] (23 C)
398. [    3.971232] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
399. [    3.971244] 8139cp 0000:00:09.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
400. [    4.023529] 8139too: 8139too Fast Ethernet driver 0.9.28
401. [    4.026198] ACPI: bus type USB registered
402. [    4.026259] usbcore: registered new interface driver usbfs
403. [    4.026289] usbcore: registered new interface driver hub
404. [    4.026647] 8139too 0000:00:09.0 eth1: RealTek RTL8139 at 0x(ptrval), 00:0e:2e:91:1a:8a, IRQ 17
405. [    4.032725] usbcore: registered new device driver usb
406. [    4.067637] SCSI subsystem initialized
407. [    4.072536] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
408. [    4.098118] ehci-pci: EHCI PCI platform driver
409. [    4.098536] ehci-pci 0000:00:10.3: EHCI Host Controller
410. [    4.098552] ehci-pci 0000:00:10.3: new USB bus registered, assigned bus number 1
411. [    4.098678] ehci-pci 0000:00:10.3: irq 21, io mem 0xe6401000
412. [    4.115294] ehci-pci 0000:00:10.3: USB 2.0 started, EHCI 1.00
413. [    4.117004] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
414. [    4.117008] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
415. [    4.117011] usb usb1: Product: EHCI Host Controller
416. [    4.117014] usb usb1: Manufacturer: Linux 4.19.0-11-686-pae ehci_hcd
417. [    4.117016] usb usb1: SerialNumber: 0000:00:10.3
418. [    4.119467] uhci_hcd: USB Universal Host Controller Interface driver
419. [    4.119939] hub 1-0:1.0: USB hub found
420. [    4.119983] hub 1-0:1.0: 6 ports detected
421. [    4.126161] uhci_hcd 0000:00:10.0: UHCI Host Controller
422. [    4.126196] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
423. [    4.126215] uhci_hcd 0000:00:10.0: detected 2 ports
424. [    4.126252] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000d400
425. [    4.126422] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
426. [    4.126426] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
427. [    4.126428] usb usb2: Product: UHCI Host Controller
428. [    4.126430] usb usb2: Manufacturer: Linux 4.19.0-11-686-pae uhci_hcd
429. [    4.126432] usb usb2: SerialNumber: 0000:00:10.0
430. [    4.128436] hub 2-0:1.0: USB hub found
431. [    4.128469] hub 2-0:1.0: 2 ports detected
432. [    4.130632] uhci_hcd 0000:00:10.1: UHCI Host Controller
433. [    4.130651] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
434. [    4.130663] uhci_hcd 0000:00:10.1: detected 2 ports
435. [    4.130692] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000d800
436. [    4.133109] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
437. [    4.133115] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
438. [    4.133118] usb usb3: Product: UHCI Host Controller
439. [    4.133120] usb usb3: Manufacturer: Linux 4.19.0-11-686-pae uhci_hcd
440. [    4.133122] usb usb3: SerialNumber: 0000:00:10.1
441. [    4.133738] hub 3-0:1.0: USB hub found
442. [    4.134790] hub 3-0:1.0: 2 ports detected
443. [    4.135475] uhci_hcd 0000:00:10.2: UHCI Host Controller
444. [    4.135491] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
445. [    4.135502] uhci_hcd 0000:00:10.2: detected 2 ports
446. [    4.135533] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000dc00
447. [    4.142155] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
448. [    4.142162] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
449. [    4.142164] usb usb4: Product: UHCI Host Controller
450. [    4.142167] usb usb4: Manufacturer: Linux 4.19.0-11-686-pae uhci_hcd
451. [    4.142169] usb usb4: SerialNumber: 0000:00:10.2
452. [    4.142503] hub 4-0:1.0: USB hub found
453. [    4.142524] hub 4-0:1.0: 2 ports detected
454. [    4.163741] libata version 3.00 loaded.
455. [    4.167195] pata_via 0000:00:11.1: version 0.3.4
456. [    4.167559] ACPI: PCI Interrupt Link [ALKA] disabled and referenced, BIOS bug
457. [    4.167649] PCI Interrupt Link [ALKA] enabled at IRQ 20
458. [    4.174583] via-rhine 0000:00:12.0 enp0s18: renamed from eth0
459. [    4.183021] 8139too 0000:00:09.0 enp0s9: renamed from eth1
460. [    4.196426] scsi host0: pata_via
461. [    4.211751] scsi host1: pata_via
462. [    4.211964] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xe000 irq 14
463. [    4.211967] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xe008 irq 15
464. [    4.375171] ata1.00: ATA-5: Maxtor 51024U2, DA620TQ0, max UDMA/66
465. [    4.375178] ata1.00: 19541088 sectors, multi 16: LBA
466. [    4.380351] scsi 0:0:0:0: Direct-Access     ATA      Maxtor 51024U2   0TQ0 PQ: 0 ANSI: 5
467. [    4.569294] sd 0:0:0:0: [sda] 19541088 512-byte logical blocks: (10.0 GB/9.32 GiB)
468. [    4.569318] sd 0:0:0:0: [sda] Write Protect is off
469. [    4.569322] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
470. [    4.569347] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
471. [    4.585121]  sda: sda1
472. [    4.585841] sd 0:0:0:0: [sda] Attached SCSI disk
473. [    4.612284] usb 2-2: new low-speed USB device number 2 using uhci_hcd
474. [    4.888343] usb 2-2: New USB device found, idVendor=04d9, idProduct=1603, bcdDevice= 3.10
475. [    4.888349] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
476. [    4.888352] usb 2-2: Product: USB Keyboard
477. [    4.888354] usb 2-2: Manufacturer:  
478. [    4.918030] hidraw: raw HID events driver (C) Jiri Kosina
479. [    5.020257] random: fast init done
480. [    5.048787] usbcore: registered new interface driver usbhid
481. [    5.048791] usbhid: USB HID core driver
482. [    5.060076] input:   USB Keyboard as /devices/pci0000:00/0000:00:10.0/usb2/2-2/2-2:1.0/0003:04D9:1603.0001/input/input3
483. [    5.117338] hid-generic 0003:04D9:1603.0001: input,hidraw0: USB HID v1.10 Keyboard [  USB Keyboard] on usb-0000:00:10.0-2/input0
484. [    5.118868] input:   USB Keyboard System Control as /devices/pci0000:00/0000:00:10.0/usb2/2-2/2-2:1.1/0003:04D9:1603.0002/input/input4
485. [    5.176568] input:   USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:10.0/usb2/2-2/2-2:1.1/0003:04D9:1603.0002/input/input5
486. [    5.176850] hid-generic 0003:04D9:1603.0002: input,hidraw1: USB HID v1.10 Device [  USB Keyboard] on usb-0000:00:10.0-2/input1
487. [    5.445738] cryptd: max_cpu_qlen set to 1000
488. [    5.589157] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
489. [    7.534183] systemd[1]: Inserted module 'autofs4'
490. [    7.742148] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
491. [    7.742464] systemd[1]: Detected architecture x86.
492. [    7.799972] systemd[1]: Set hostname to <server>.
493. [    9.134386] random: crng init done
494. [    9.725971] systemd[1]: /lib/systemd/system/squid.service:7: PIDFile= references path below legacy directory /var/run/, updating /var/run/squid.pid → /run/squid.pid; please update the unit file accordingly.
495. [    9.889421] systemd[1]: Listening on Journal Socket (/dev/log).
496. [    9.891364] systemd[1]: Created slice User and Session Slice.
497. [    9.891903] systemd[1]: Listening on Journal Socket.
498. [    9.895560] systemd[1]: Mounting Huge Pages File System...
499. [    9.900308] systemd[1]: Mounting POSIX Message Queue File System...
500. [    9.929054] systemd[1]: Starting Set the console keyboard layout...
501. [   10.410041] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
502. [   11.105242] systemd-journald[164]: Received request to flush runtime journal from PID 1
503. [   12.766298] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6
504. [   12.766329] ACPI: Power Button [PWRB]
505. [   12.769040] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input7
506. [   12.769096] ACPI: Sleep Button [SLPB]
507. [   12.769242] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input8
508. [   12.769262] ACPI: Power Button [PWRF]
509. [   13.285493] parport_pc 00:06: reported by Plug and Play ACPI
510. [   13.285620] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
511. [   13.332518] sd 0:0:0:0: Attached scsi generic sg0 type 0
512. [   13.702289] input: PC Speaker as /devices/platform/pcspkr/input/input9
513. [   13.840048] audit: type=1400 audit(1602216687.787:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=206 comm="apparmor_parser"
514. [   13.840061] audit: type=1400 audit(1602216687.787:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=206 comm="apparmor_parser"
515. [   13.840067] audit: type=1400 audit(1602216687.787:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=206 comm="apparmor_parser"
516. [   14.073277] audit: type=1400 audit(1602216688.023:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=228 comm="apparmor_parser"
517. [   14.073287] audit: type=1400 audit(1602216688.023:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=228 comm="apparmor_parser"
518. [   14.075714] gameport gameport0: NS558 PnP Gameport is pnp00:07/gameport0, io 0x201, speed 903kHz
519. [   14.082088] ppdev: user-space parallel port driver
520. [   15.362449] PCI Interrupt Link [ALKC] enabled at IRQ 22
521. [   15.559631] 8139too 0000:00:09.0 enp0s9: link up, 100Mbps, full-duplex, lpa 0x41E1
522. [   15.886722] snd_via82xx 0000:00:11.5: codec_read: codec 0 is not valid [0xfe0000]
523. [   15.894262] snd_via82xx 0000:00:11.5: codec_read: codec 0 is not valid [0xfe0000]
524. [   15.902773] snd_via82xx 0000:00:11.5: codec_read: codec 0 is not valid [0xfe0000]
525. [   15.909154] snd_via82xx 0000:00:11.5: codec_read: codec 0 is not valid [0xfe0000]
526. root@server:/home/admini#

Quellcode

Hier kannst du den Code kopieren und ihn in deinen bevorzugten Editor einfügen. PASTEBIN_DOWNLOAD_SNIPPET_EXPLAIN