Syslog
von Emess- SNIPPET_DESC:
- journactl -xb
- SNIPPET_CREATION_TIME:
- 08.11.2020 16:55:50
- SNIPPET_PRUNE_TIME:
- Unendlich
- SNIPPET_TEXT:
-
- -- Logs begin at Sun 2020-02-23 13:00:38 CET, end at Sun 2020-11-08 16:34:35 CET. --
- Nov 08 16:33:50 bullseye kernel: Linux version 5.9.0-1-amd64 (debian-kernel@lists.debian.org) (gcc-10 (Debian 10.2.0-15) 10.2.0, GNU ld (GNU Binutils for Debian) 2.35.1) #1 SMP Debian 5.9.1-1 (2020-10-17)
- Nov 08 16:33:50 bullseye kernel: Command line: BOOT_IMAGE=/boot/vmlinuz-5.9.0-1-amd64 root=UUID=fc63fda3-ba59-4124-a9ed-396e5cb3f276 ro single
- Nov 08 16:33:50 bullseye kernel: x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
- Nov 08 16:33:50 bullseye kernel: x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
- Nov 08 16:33:50 bullseye kernel: x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
- Nov 08 16:33:50 bullseye kernel: x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
- Nov 08 16:33:50 bullseye kernel: x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
- Nov 08 16:33:50 bullseye kernel: BIOS-provided physical RAM map:
- Nov 08 16:33:50 bullseye kernel: BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] usable
- Nov 08 16:33:50 bullseye kernel: BIOS-e820: [mem 0x000000000009dc00-0x000000000009ffff] reserved
- Nov 08 16:33:50 bullseye kernel: BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
- Nov 08 16:33:50 bullseye kernel: BIOS-e820: [mem 0x0000000000100000-0x000000005cb7efff] usable
- Nov 08 16:33:50 bullseye kernel: BIOS-e820: [mem 0x000000005cb7f000-0x000000005de7efff] reserved
- Nov 08 16:33:50 bullseye kernel: BIOS-e820: [mem 0x000000005de7f000-0x000000005df7efff] ACPI NVS
- Nov 08 16:33:50 bullseye kernel: BIOS-e820: [mem 0x000000005df7f000-0x000000005dffefff] ACPI data
- Nov 08 16:33:50 bullseye kernel: BIOS-e820: [mem 0x000000005dfff000-0x000000005dffffff] usable
- Nov 08 16:33:50 bullseye kernel: BIOS-e820: [mem 0x000000005e000000-0x000000005fffffff] reserved
- Nov 08 16:33:50 bullseye kernel: BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
- Nov 08 16:33:50 bullseye kernel: BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
- Nov 08 16:33:50 bullseye kernel: BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
- Nov 08 16:33:50 bullseye kernel: BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
- Nov 08 16:33:50 bullseye kernel: BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
- Nov 08 16:33:50 bullseye kernel: BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
- Nov 08 16:33:50 bullseye kernel: BIOS-e820: [mem 0x00000000ff600000-0x00000000ffffffff] reserved
- Nov 08 16:33:50 bullseye kernel: BIOS-e820: [mem 0x0000000100000000-0x000000059dffffff] usable
- Nov 08 16:33:50 bullseye kernel: NX (Execute Disable) protection: active
- Nov 08 16:33:50 bullseye kernel: SMBIOS 2.7 present.
- Nov 08 16:33:50 bullseye kernel: DMI: Hewlett-Packard HP ZBook 17 G2/2255, BIOS M70 Ver. 01.26 03/03/2020
- Nov 08 16:33:50 bullseye kernel: tsc: Fast TSC calibration using PIT
- Nov 08 16:33:50 bullseye kernel: tsc: Detected 2793.627 MHz processor
- Nov 08 16:33:50 bullseye kernel: e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
- Nov 08 16:33:50 bullseye kernel: e820: remove [mem 0x000a0000-0x000fffff] usable
- Nov 08 16:33:50 bullseye kernel: last_pfn = 0x59e000 max_arch_pfn = 0x400000000
- Nov 08 16:33:50 bullseye kernel: MTRR default type: uncachable
- Nov 08 16:33:50 bullseye kernel: MTRR fixed ranges enabled:
- Nov 08 16:33:50 bullseye kernel: 00000-9FFFF write-back
- Nov 08 16:33:50 bullseye kernel: A0000-BFFFF uncachable
- Nov 08 16:33:50 bullseye kernel: C0000-FFFFF write-protect
- Nov 08 16:33:50 bullseye kernel: MTRR variable ranges enabled:
- Nov 08 16:33:50 bullseye kernel: 0 base 00FF000000 mask 7FFF000000 write-protect
- Nov 08 16:33:50 bullseye kernel: 1 base 0000000000 mask 7FC0000000 write-back
- Nov 08 16:33:50 bullseye kernel: 2 base 0040000000 mask 7FE0000000 write-back
- Nov 08 16:33:50 bullseye kernel: 3 base 0100000000 mask 7F00000000 write-back
- Nov 08 16:33:50 bullseye kernel: 4 base 0200000000 mask 7E00000000 write-back
- Nov 08 16:33:50 bullseye kernel: 5 base 0400000000 mask 7F00000000 write-back
- Nov 08 16:33:50 bullseye kernel: 6 base 0500000000 mask 7F80000000 write-back
- Nov 08 16:33:50 bullseye kernel: 7 base 0580000000 mask 7FE0000000 write-back
- Nov 08 16:33:50 bullseye kernel: 8 base 059E000000 mask 7FFE000000 uncachable
- Nov 08 16:33:50 bullseye kernel: 9 disabled
- Nov 08 16:33:50 bullseye kernel: x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
- Nov 08 16:33:50 bullseye kernel: last_pfn = 0x5e000 max_arch_pfn = 0x400000000
- Nov 08 16:33:50 bullseye kernel: Using GB pages for direct mapping
- Nov 08 16:33:50 bullseye kernel: RAMDISK: [mem 0x30827000-0x3440afff]
- Nov 08 16:33:50 bullseye kernel: ACPI: Early table checksum verification disabled
- Nov 08 16:33:50 bullseye kernel: ACPI: RSDP 0x00000000000FC2A0 000024 (v02 HPQOEM)
- Nov 08 16:33:50 bullseye kernel: ACPI: XSDT 0x000000005DFFD0E8 0000AC (v01 HPQOEM SLIC-MPC 00000001 01000013)
- Nov 08 16:33:50 bullseye kernel: ACPI: FACP 0x000000005DFFB000 00010C (v05 HPQOEM 2255 00000001 HP 00000001)
- Nov 08 16:33:50 bullseye kernel: ACPI: DSDT 0x000000005DFCF000 026B34 (v02 HPQOEM 2255 00000001 INTL 20130927)
- Nov 08 16:33:50 bullseye kernel: ACPI: FACS 0x000000005DF66000 000040
- Nov 08 16:33:50 bullseye kernel: ACPI: HPET 0x000000005DFFA000 000038 (v01 HPQOEM 2255 00000001 HP 00000001)
- Nov 08 16:33:50 bullseye kernel: ACPI: APIC 0x000000005DFF9000 0000BC (v01 HPQOEM 2255 00000001 HP 00000001)
- Nov 08 16:33:50 bullseye kernel: ACPI: MCFG 0x000000005DFF8000 00003C (v01 HPQOEM 2255 00000001 HP 00000001)
- Nov 08 16:33:50 bullseye kernel: ACPI: TCPA 0x000000005DFF6000 000032 (v02 HPQOEM 2255 00000000 HP 00000001)
- Nov 08 16:33:50 bullseye kernel: ACPI: SSDT 0x000000005DFCC000 00042C (v01 HPQOEM SataAhci 00001000 INTL 20130927)
- Nov 08 16:33:50 bullseye kernel: ACPI: SSDT 0x000000005DFCB000 00048A (v01 HPQOEM PtidDevc 00001000 INTL 20130927)
- Nov 08 16:33:50 bullseye kernel: ACPI: SLIC 0x000000005DFCA000 000176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001)
- Nov 08 16:33:50 bullseye kernel: ACPI: MSDM 0x000000005DFC9000 000055 (v03 HPQOEM SLIC-MPC 00000000 HP 00000001)
- Nov 08 16:33:50 bullseye kernel: ACPI: FPDT 0x000000005DFC8000 000044 (v01 HPQOEM 2255 00000001 HP 00000001)
- Nov 08 16:33:50 bullseye kernel: ACPI: BGRT 0x000000005DFC7000 000038 (v00 HPQOEM 2255 00000001 HP 00000001)
- Nov 08 16:33:50 bullseye kernel: ACPI: SSDT 0x000000005DFC4000 001A24 (v01 HPQOEM NVIDIAGF 00000001 INTL 20130927)
- Nov 08 16:33:50 bullseye kernel: ACPI: SSDT 0x000000005DFC1000 000544 (v02 PmRef Cpu0Ist 00003000 INTL 20130927)
- Nov 08 16:33:50 bullseye kernel: ACPI: SSDT 0x000000005DFC0000 000B8F (v02 CpuRef CpuSsdt 00003000 INTL 20130927)
- Nov 08 16:33:50 bullseye kernel: ACPI: SSDT 0x000000005DFBF000 0001D5 (v02 PmRef LakeTiny 00003000 INTL 20130927)
- Nov 08 16:33:50 bullseye kernel: ACPI: SSDT 0x000000005DFBE000 00092C (v02 SaSsdt SaSsdt 00003000 INTL 20130927)
- Nov 08 16:33:50 bullseye kernel: ACPI: ASF! 0x000000005DFF7000 0000A5 (v32 HPQOEM 2255 00000001 HP 00000001)
- Nov 08 16:33:50 bullseye kernel: ACPI: Local APIC address 0xfee00000
- Nov 08 16:33:50 bullseye kernel: No NUMA configuration found
- Nov 08 16:33:50 bullseye kernel: Faking a node at [mem 0x0000000000000000-0x000000059dffffff]
- Nov 08 16:33:50 bullseye kernel: NODE_DATA(0) allocated [mem 0x59dffb000-0x59dffffff]
- Nov 08 16:33:50 bullseye kernel: Zone ranges:
- Nov 08 16:33:50 bullseye kernel: DMA [mem 0x0000000000001000-0x0000000000ffffff]
- Nov 08 16:33:50 bullseye kernel: DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
- Nov 08 16:33:50 bullseye kernel: Normal [mem 0x0000000100000000-0x000000059dffffff]
- Nov 08 16:33:50 bullseye kernel: Device empty
- Nov 08 16:33:50 bullseye kernel: Movable zone start for each node
- Nov 08 16:33:50 bullseye kernel: Early memory node ranges
- Nov 08 16:33:50 bullseye kernel: node 0: [mem 0x0000000000001000-0x000000000009cfff]
- Nov 08 16:33:50 bullseye kernel: node 0: [mem 0x0000000000100000-0x000000005cb7efff]
- Nov 08 16:33:50 bullseye kernel: node 0: [mem 0x000000005dfff000-0x000000005dffffff]
- Nov 08 16:33:50 bullseye kernel: node 0: [mem 0x0000000100000000-0x000000059dffffff]
- Nov 08 16:33:50 bullseye kernel: Zeroed struct page in unavailable ranges: 21732 pages
- Nov 08 16:33:50 bullseye kernel: Initmem setup node 0 [mem 0x0000000000001000-0x000000059dffffff]
- Nov 08 16:33:50 bullseye kernel: On node 0 totalpages: 5221148
- Nov 08 16:33:50 bullseye kernel: DMA zone: 64 pages used for memmap
- Nov 08 16:33:50 bullseye kernel: DMA zone: 21 pages reserved
- Nov 08 16:33:50 bullseye kernel: DMA zone: 3996 pages, LIFO batch:0
- Nov 08 16:33:50 bullseye kernel: DMA32 zone: 5870 pages used for memmap
- Nov 08 16:33:50 bullseye kernel: DMA32 zone: 375680 pages, LIFO batch:63
- Nov 08 16:33:50 bullseye kernel: Normal zone: 75648 pages used for memmap
- Nov 08 16:33:50 bullseye kernel: Normal zone: 4841472 pages, LIFO batch:63
- Nov 08 16:33:50 bullseye kernel: ACPI: PM-Timer IO Port: 0x1808
- Nov 08 16:33:50 bullseye kernel: ACPI: Local APIC address 0xfee00000
- Nov 08 16:33:50 bullseye kernel: ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
- Nov 08 16:33:50 bullseye kernel: ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
- Nov 08 16:33:50 bullseye kernel: ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
- Nov 08 16:33:50 bullseye kernel: ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
- Nov 08 16:33:50 bullseye kernel: ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
- Nov 08 16:33:50 bullseye kernel: ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
- Nov 08 16:33:50 bullseye kernel: ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
- Nov 08 16:33:50 bullseye kernel: ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
- Nov 08 16:33:50 bullseye kernel: IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
- Nov 08 16:33:50 bullseye kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- Nov 08 16:33:50 bullseye kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
- Nov 08 16:33:50 bullseye kernel: ACPI: IRQ0 used by override.
- Nov 08 16:33:50 bullseye kernel: ACPI: IRQ9 used by override.
- Nov 08 16:33:50 bullseye kernel: Using ACPI (MADT) for SMP configuration information
- Nov 08 16:33:50 bullseye kernel: ACPI: HPET id: 0x8086a201 base: 0xfed00000
- Nov 08 16:33:50 bullseye kernel: TSC deadline timer available
- Nov 08 16:33:50 bullseye kernel: smpboot: Allowing 8 CPUs, 0 hotplug CPUs
- Nov 08 16:33:50 bullseye kernel: PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
- Nov 08 16:33:50 bullseye kernel: PM: hibernation: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
- Nov 08 16:33:50 bullseye kernel: PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
- Nov 08 16:33:50 bullseye kernel: PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff]
- Nov 08 16:33:50 bullseye kernel: PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff]
- Nov 08 16:33:50 bullseye kernel: PM: hibernation: Registered nosave memory: [mem 0x5cb7f000-0x5de7efff]
- Nov 08 16:33:50 bullseye kernel: PM: hibernation: Registered nosave memory: [mem 0x5de7f000-0x5df7efff]
- Nov 08 16:33:50 bullseye kernel: PM: hibernation: Registered nosave memory: [mem 0x5df7f000-0x5dffefff]
- Nov 08 16:33:50 bullseye kernel: PM: hibernation: Registered nosave memory: [mem 0x5e000000-0x5fffffff]
- Nov 08 16:33:50 bullseye kernel: PM: hibernation: Registered nosave memory: [mem 0x60000000-0xdfffffff]
- Nov 08 16:33:50 bullseye kernel: PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xefffffff]
- Nov 08 16:33:50 bullseye kernel: PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
- Nov 08 16:33:50 bullseye kernel: PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
- Nov 08 16:33:50 bullseye kernel: PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
- Nov 08 16:33:50 bullseye kernel: PM: hibernation: Registered nosave memory: [mem 0xfed10000-0xfed13fff]
- Nov 08 16:33:50 bullseye kernel: PM: hibernation: Registered nosave memory: [mem 0xfed14000-0xfed17fff]
- Nov 08 16:33:50 bullseye kernel: PM: hibernation: Registered nosave memory: [mem 0xfed18000-0xfed19fff]
- Nov 08 16:33:50 bullseye kernel: PM: hibernation: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
- Nov 08 16:33:50 bullseye kernel: PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
- Nov 08 16:33:50 bullseye kernel: PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
- Nov 08 16:33:50 bullseye kernel: PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
- Nov 08 16:33:50 bullseye kernel: PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xff5fffff]
- Nov 08 16:33:50 bullseye kernel: PM: hibernation: Registered nosave memory: [mem 0xff600000-0xffffffff]
- Nov 08 16:33:50 bullseye kernel: [mem 0x60000000-0xdfffffff] available for PCI devices
- Nov 08 16:33:50 bullseye kernel: Booting paravirtualized kernel on bare hardware
- Nov 08 16:33:50 bullseye kernel: clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
- Nov 08 16:33:50 bullseye kernel: setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
- Nov 08 16:33:50 bullseye kernel: percpu: Embedded 55 pages/cpu s184920 r8192 d32168 u262144
- Nov 08 16:33:50 bullseye kernel: pcpu-alloc: s184920 r8192 d32168 u262144 alloc=1*2097152
- Nov 08 16:33:50 bullseye kernel: pcpu-alloc: [0] 0 1 2 3 4 5 6 7
- Nov 08 16:33:50 bullseye kernel: Built 1 zonelists, mobility grouping on. Total pages: 5139545
- Nov 08 16:33:50 bullseye kernel: Policy zone: Normal
- Nov 08 16:33:50 bullseye kernel: Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.9.0-1-amd64 root=UUID=fc63fda3-ba59-4124-a9ed-396e5cb3f276 ro single
- Nov 08 16:33:50 bullseye kernel: Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
- Nov 08 16:33:50 bullseye kernel: Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
- Nov 08 16:33:50 bullseye kernel: mem auto-init: stack:off, heap alloc:on, heap free:off
- Nov 08 16:33:50 bullseye kernel: Memory: 1522568K/20884592K available (12291K kernel code, 1319K rwdata, 3764K rodata, 1636K init, 1752K bss, 532696K reserved, 0K cma-reserved)
- Nov 08 16:33:50 bullseye kernel: random: get_random_u64 called from __kmem_cache_create+0x2e/0x540 with crng_init=0
- Nov 08 16:33:50 bullseye kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
- Nov 08 16:33:50 bullseye kernel: Kernel/User page tables isolation: enabled
- Nov 08 16:33:50 bullseye kernel: ftrace: allocating 34815 entries in 136 pages
- Nov 08 16:33:50 bullseye kernel: ftrace: allocated 136 pages with 2 groups
- Nov 08 16:33:50 bullseye kernel: rcu: Hierarchical RCU implementation.
- Nov 08 16:33:50 bullseye kernel: rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
- Nov 08 16:33:50 bullseye kernel: Rude variant of Tasks RCU enabled.
- Nov 08 16:33:50 bullseye kernel: rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
- Nov 08 16:33:50 bullseye kernel: rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
- Nov 08 16:33:50 bullseye kernel: NR_IRQS: 33024, nr_irqs: 488, preallocated irqs: 16
- Nov 08 16:33:50 bullseye kernel: random: crng done (trusting CPU's manufacturer)
- Nov 08 16:33:50 bullseye kernel: Console: colour VGA+ 80x25
- Nov 08 16:33:50 bullseye kernel: printk: console [tty0] enabled
- Nov 08 16:33:50 bullseye kernel: ACPI: Core revision 20200717
- Nov 08 16:33:50 bullseye kernel: clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
- Nov 08 16:33:50 bullseye kernel: APIC: Switch to symmetric I/O mode setup
- Nov 08 16:33:50 bullseye kernel: x2apic: IRQ remapping doesn't support X2APIC mode
- Nov 08 16:33:50 bullseye kernel: ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
- Nov 08 16:33:50 bullseye kernel: clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2844bc63fa3, max_idle_ns: 440795279395 ns
- Nov 08 16:33:50 bullseye kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 5587.25 BogoMIPS (lpj=11174508)
- Nov 08 16:33:50 bullseye kernel: pid_max: default: 32768 minimum: 301
- Nov 08 16:33:50 bullseye kernel: LSM: Security Framework initializing
- Nov 08 16:33:50 bullseye kernel: Yama: disabled by default; enable with sysctl kernel.yama.*
- Nov 08 16:33:50 bullseye kernel: AppArmor: AppArmor initialized
- Nov 08 16:33:50 bullseye kernel: TOMOYO Linux initialized
- Nov 08 16:33:50 bullseye kernel: Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
- Nov 08 16:33:50 bullseye kernel: Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
- Nov 08 16:33:50 bullseye kernel: x86/cpu: VMX (outside TXT) disabled by BIOS
- Nov 08 16:33:50 bullseye kernel: mce: CPU0: Thermal monitoring enabled (TM1)
- Nov 08 16:33:50 bullseye kernel: process: using mwait in idle threads
- Nov 08 16:33:50 bullseye kernel: Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
- Nov 08 16:33:50 bullseye kernel: Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
- Nov 08 16:33:50 bullseye kernel: Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
- Nov 08 16:33:50 bullseye kernel: Spectre V2 : Mitigation: Full generic retpoline
- Nov 08 16:33:50 bullseye kernel: Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
- Nov 08 16:33:50 bullseye kernel: Spectre V2 : Enabling Restricted Speculation for firmware calls
- Nov 08 16:33:50 bullseye kernel: Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
- Nov 08 16:33:50 bullseye kernel: Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
- Nov 08 16:33:50 bullseye kernel: Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
- Nov 08 16:33:50 bullseye kernel: SRBDS: Mitigation: Microcode
- Nov 08 16:33:50 bullseye kernel: MDS: Mitigation: Clear CPU buffers
- Nov 08 16:33:50 bullseye kernel: Freeing SMP alternatives memory: 32K
- Nov 08 16:33:50 bullseye kernel: smpboot: CPU0: Intel(R) Core(TM) i7-4810MQ CPU @ 2.80GHz (family: 0x6, model: 0x3c, stepping: 0x3)
- Nov 08 16:33:50 bullseye kernel: Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
- Nov 08 16:33:50 bullseye kernel: ... version: 3
- Nov 08 16:33:50 bullseye kernel: ... bit width: 48
- Nov 08 16:33:50 bullseye kernel: ... generic registers: 4
- Nov 08 16:33:50 bullseye kernel: ... value mask: 0000ffffffffffff
- Nov 08 16:33:50 bullseye kernel: ... max period: 00007fffffffffff
- Nov 08 16:33:50 bullseye kernel: ... fixed-purpose events: 3
- Nov 08 16:33:50 bullseye kernel: ... event mask: 000000070000000f
- Nov 08 16:33:50 bullseye kernel: rcu: Hierarchical SRCU implementation.
- Nov 08 16:33:50 bullseye kernel: NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
- Nov 08 16:33:50 bullseye kernel: smp: Bringing up secondary CPUs ...
- Nov 08 16:33:50 bullseye kernel: x86: Booting SMP configuration:
- Nov 08 16:33:50 bullseye kernel: .... node #0, CPUs: #1
- Nov 08 16:33:50 bullseye kernel: MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
- Nov 08 16:33:50 bullseye kernel: #2 #3 #4 #5 #6 #7
- Nov 08 16:33:50 bullseye kernel: smp: Brought up 1 node, 8 CPUs
- Nov 08 16:33:50 bullseye kernel: smpboot: Max logical packages: 1
- Nov 08 16:33:50 bullseye kernel: smpboot: Total of 8 processors activated (44698.03 BogoMIPS)
- Nov 08 16:33:50 bullseye kernel: node 0 deferred pages initialised in 32ms
- Nov 08 16:33:50 bullseye kernel: devtmpfs: initialized
- Nov 08 16:33:50 bullseye kernel: x86/mm: Memory block size: 128MB
- Nov 08 16:33:50 bullseye kernel: PM: Registering ACPI NVS region [mem 0x5de7f000-0x5df7efff] (1048576 bytes)
- Nov 08 16:33:50 bullseye kernel: clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
- Nov 08 16:33:50 bullseye kernel: futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
- Nov 08 16:33:50 bullseye kernel: pinctrl core: initialized pinctrl subsystem
- Nov 08 16:33:50 bullseye kernel: NET: Registered protocol family 16
- Nov 08 16:33:50 bullseye kernel: audit: initializing netlink subsys (disabled)
- Nov 08 16:33:50 bullseye kernel: audit: type=2000 audit(1604853216.068:1): state=initialized audit_enabled=0 res=1
- Nov 08 16:33:50 bullseye kernel: thermal_sys: Registered thermal governor 'fair_share'
- Nov 08 16:33:50 bullseye kernel: thermal_sys: Registered thermal governor 'bang_bang'
- Nov 08 16:33:50 bullseye kernel: thermal_sys: Registered thermal governor 'step_wise'
- Nov 08 16:33:50 bullseye kernel: thermal_sys: Registered thermal governor 'user_space'
- Nov 08 16:33:50 bullseye kernel: cpuidle: using governor ladder
- Nov 08 16:33:50 bullseye kernel: cpuidle: using governor menu
- Nov 08 16:33:50 bullseye kernel: ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
- Nov 08 16:33:50 bullseye kernel: ACPI: bus type PCI registered
- Nov 08 16:33:50 bullseye kernel: acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
- Nov 08 16:33:50 bullseye kernel: PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
- Nov 08 16:33:50 bullseye kernel: PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
- Nov 08 16:33:50 bullseye kernel: PCI: Using configuration type 1 for base access
- Nov 08 16:33:50 bullseye kernel: core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
- Nov 08 16:33:50 bullseye kernel: ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
- Nov 08 16:33:50 bullseye kernel: mtrr: your CPUs had inconsistent variable MTRR settings
- Nov 08 16:33:50 bullseye kernel: mtrr: probably your BIOS does not setup all CPUs.
- Nov 08 16:33:50 bullseye kernel: mtrr: corrected configuration.
- Nov 08 16:33:50 bullseye kernel: HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
- Nov 08 16:33:50 bullseye kernel: HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
- Nov 08 16:33:50 bullseye kernel: ACPI: Added _OSI(Module Device)
- Nov 08 16:33:50 bullseye kernel: ACPI: Added _OSI(Processor Device)
- Nov 08 16:33:50 bullseye kernel: ACPI: Added _OSI(3.0 _SCP Extensions)
- Nov 08 16:33:50 bullseye kernel: ACPI: Added _OSI(Processor Aggregator Device)
- Nov 08 16:33:50 bullseye kernel: ACPI: Added _OSI(Linux-Dell-Video)
- Nov 08 16:33:50 bullseye kernel: ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
- Nov 08 16:33:50 bullseye kernel: ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
- Nov 08 16:33:50 bullseye kernel: ACPI: 8 ACPI AML tables successfully acquired and loaded
- Nov 08 16:33:50 bullseye kernel: ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
- Nov 08 16:33:50 bullseye kernel: ACPI: Dynamic OEM Table Load:
- Nov 08 16:33:50 bullseye kernel: ACPI: SSDT 0xFFFF9794C7582800 0003F3 (v02 PmRef Cpu0Cst 00003001 INTL 20130927)
- Nov 08 16:33:50 bullseye kernel: ACPI: Dynamic OEM Table Load:
- Nov 08 16:33:50 bullseye kernel: ACPI: SSDT 0xFFFF9794C7561000 0005DB (v02 PmRef ApIst 00003000 INTL 20130927)
- Nov 08 16:33:50 bullseye kernel: ACPI: Dynamic OEM Table Load:
- Nov 08 16:33:50 bullseye kernel: ACPI: SSDT 0xFFFF9798AF2DEE00 000119 (v02 PmRef ApCst 00003000 INTL 20130927)
- Nov 08 16:33:50 bullseye kernel: ACPI: EC: EC started
- Nov 08 16:33:50 bullseye kernel: ACPI: EC: interrupt blocked
- Nov 08 16:33:50 bullseye kernel: ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
- Nov 08 16:33:50 bullseye kernel: ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions
- Nov 08 16:33:50 bullseye kernel: ACPI: Interpreter enabled
- Nov 08 16:33:50 bullseye kernel: ACPI: (supports S0 S3 S4 S5)
- Nov 08 16:33:50 bullseye kernel: ACPI: Using IOAPIC for interrupt routing
- Nov 08 16:33:50 bullseye kernel: PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
- Nov 08 16:33:50 bullseye kernel: ACPI: Enabled 8 GPEs in block 00 to 3F
- Nov 08 16:33:50 bullseye kernel: ACPI: Power Resource [APPR] (off)
- Nov 08 16:33:50 bullseye kernel: ACPI: Power Resource [COMP] (off)
- Nov 08 16:33:50 bullseye kernel: ACPI: Power Resource [LPP] (on)
- Nov 08 16:33:50 bullseye kernel: ACPI: Power Resource [WRST] (on)
- Nov 08 16:33:50 bullseye kernel: ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
- Nov 08 16:33:50 bullseye kernel: acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
- Nov 08 16:33:50 bullseye kernel: acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug LTR]
- Nov 08 16:33:50 bullseye kernel: acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
- Nov 08 16:33:50 bullseye kernel: acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
- Nov 08 16:33:50 bullseye kernel: PCI host bridge to bus 0000:00
- Nov 08 16:33:50 bullseye kernel: pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
- Nov 08 16:33:50 bullseye kernel: pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
- Nov 08 16:33:50 bullseye kernel: pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
- Nov 08 16:33:50 bullseye kernel: pci_bus 0000:00: root bus resource [mem 0x60000000-0xdfffffff window]
- Nov 08 16:33:50 bullseye kernel: pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfed3ffff window]
- Nov 08 16:33:50 bullseye kernel: pci_bus 0000:00: root bus resource [mem 0xfed45000-0xfedfffff window]
- Nov 08 16:33:50 bullseye kernel: pci_bus 0000:00: root bus resource [mem 0xfee01000-0xffffffff window]
- Nov 08 16:33:50 bullseye kernel: pci_bus 0000:00: root bus resource [bus 00-fe]
- Nov 08 16:33:50 bullseye kernel: pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000
- Nov 08 16:33:50 bullseye kernel: pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
- Nov 08 16:33:50 bullseye kernel: pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
- Nov 08 16:33:50 bullseye kernel: pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
- Nov 08 16:33:50 bullseye kernel: pci 0000:00:14.0: reg 0x10: [mem 0xd2120000-0xd212ffff 64bit]
- Nov 08 16:33:50 bullseye kernel: pci 0000:00:14.0: PME# supported from D3hot D3cold
- Nov 08 16:33:50 bullseye kernel: pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
- Nov 08 16:33:50 bullseye kernel: pci 0000:00:16.0: reg 0x10: [mem 0xd2138000-0xd213800f 64bit]
- Nov 08 16:33:50 bullseye kernel: pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
- Nov 08 16:33:50 bullseye kernel: pci 0000:00:16.3: [8086:8c3d] type 00 class 0x070002
- Nov 08 16:33:50 bullseye kernel: pci 0000:00:16.3: reg 0x10: [io 0x6070-0x6077]
- Nov 08 16:33:50 bullseye kernel: pci 0000:00:16.3: reg 0x14: [mem 0xd213b000-0xd213bfff]
- Nov 08 16:33:50 bullseye kernel: pci 0000:00:19.0: [8086:153a] type 00 class 0x020000
- Nov 08 16:33:50 bullseye kernel: pci 0000:00:19.0: reg 0x10: [mem 0xd2100000-0xd211ffff]
- Nov 08 16:33:50 bullseye kernel: pci 0000:00:19.0: reg 0x14: [mem 0xd213a000-0xd213afff]
- Nov 08 16:33:50 bullseye kernel: pci 0000:00:19.0: reg 0x18: [io 0x6040-0x605f]
- Nov 08 16:33:50 bullseye kernel: pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
- Nov 08 16:33:50 bullseye kernel: pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
- Nov 08 16:33:50 bullseye kernel: pci 0000:00:1a.0: reg 0x10: [mem 0xd2136000-0xd21363ff]
- Nov 08 16:33:50 bullseye kernel: pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
- Nov 08 16:33:50 bullseye kernel: pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
- Nov 08 16:33:50 bullseye kernel: pci 0000:00:1b.0: reg 0x10: [mem 0xd2130000-0xd2133fff 64bit]
- Nov 08 16:33:50 bullseye kernel: pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
- Nov 08 16:33:50 bullseye kernel: pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
- Nov 08 16:33:50 bullseye kernel: pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
- Nov 08 16:33:50 bullseye kernel: pci 0000:00:1c.6: [8086:8c1c] type 01 class 0x060400
- Nov 08 16:33:50 bullseye kernel: pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
- Nov 08 16:33:50 bullseye kernel: pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
- Nov 08 16:33:50 bullseye kernel: pci 0000:00:1d.0: reg 0x10: [mem 0xd2135000-0xd21353ff]
- Nov 08 16:33:50 bullseye kernel: pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
- Nov 08 16:33:50 bullseye kernel: pci 0000:00:1f.0: [8086:8c4f] type 00 class 0x060100
- Nov 08 16:33:50 bullseye kernel: pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601
- Nov 08 16:33:50 bullseye kernel: pci 0000:00:1f.2: reg 0x10: [io 0x6068-0x606f]
- Nov 08 16:33:50 bullseye kernel: pci 0000:00:1f.2: reg 0x14: [io 0x607c-0x607f]
- Nov 08 16:33:50 bullseye kernel: pci 0000:00:1f.2: reg 0x18: [io 0x6060-0x6067]
- Nov 08 16:33:50 bullseye kernel: pci 0000:00:1f.2: reg 0x1c: [io 0x6078-0x607b]
- Nov 08 16:33:50 bullseye kernel: pci 0000:00:1f.2: reg 0x20: [io 0x6020-0x603f]
- Nov 08 16:33:50 bullseye kernel: pci 0000:00:1f.2: reg 0x24: [mem 0xd2134000-0xd21347ff]
- Nov 08 16:33:50 bullseye kernel: pci 0000:00:1f.2: PME# supported from D3hot
- Nov 08 16:33:50 bullseye kernel: pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
- Nov 08 16:33:50 bullseye kernel: pci 0000:00:1f.3: reg 0x10: [mem 0xd2137000-0xd21370ff 64bit]
- Nov 08 16:33:50 bullseye kernel: pci 0000:00:1f.3: reg 0x20: [io 0xef80-0xef9f]
- Nov 08 16:33:50 bullseye kernel: pci 0000:01:00.0: [10de:11b6] type 00 class 0x030000
- Nov 08 16:33:50 bullseye kernel: pci 0000:01:00.0: reg 0x10: [mem 0xd1000000-0xd1ffffff]
- Nov 08 16:33:50 bullseye kernel: pci 0000:01:00.0: reg 0x14: [mem 0x70000000-0x7fffffff 64bit pref]
- Nov 08 16:33:50 bullseye kernel: pci 0000:01:00.0: reg 0x1c: [mem 0x80000000-0x81ffffff 64bit pref]
- Nov 08 16:33:50 bullseye kernel: pci 0000:01:00.0: reg 0x24: [io 0x5000-0x507f]
- Nov 08 16:33:50 bullseye kernel: pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
- Nov 08 16:33:50 bullseye kernel: pci 0000:01:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x16 link at 0000:00:01.0 (capable of 126.016 Gb/s with 8.0 GT/s PCIe x16 link)
- Nov 08 16:33:50 bullseye kernel: pci 0000:01:00.1: [10de:0e0a] type 00 class 0x040300
- Nov 08 16:33:50 bullseye kernel: pci 0000:01:00.1: reg 0x10: [mem 0xd2000000-0xd2003fff]
- Nov 08 16:33:50 bullseye kernel: pci 0000:00:01.0: ASPM: current common clock configuration is inconsistent, reconfiguring
- Nov 08 16:33:50 bullseye kernel: pci 0000:00:01.0: PCI bridge to [bus 01]
- Nov 08 16:33:50 bullseye kernel: pci 0000:00:01.0: bridge window [io 0x5000-0x5fff]
- Nov 08 16:33:50 bullseye kernel: pci 0000:00:01.0: bridge window [mem 0xd1000000-0xd20fffff]
- Nov 08 16:33:50 bullseye kernel: pci 0000:00:01.0: bridge window [mem 0x70000000-0x81ffffff 64bit pref]
- Nov 08 16:33:50 bullseye kernel: pci 0000:00:1c.0: PCI bridge to [bus 02-3a]
- Nov 08 16:33:50 bullseye kernel: pci 0000:00:1c.0: bridge window [mem 0xb4000000-0xca0fffff]
- Nov 08 16:33:50 bullseye kernel: pci 0000:00:1c.0: bridge window [mem 0x90000000-0xb1ffffff 64bit pref]
- Nov 08 16:33:50 bullseye kernel: pci 0000:3b:00.0: [12d8:2404] type 01 class 0x060400
- Nov 08 16:33:50 bullseye kernel: pci 0000:3b:00.0: supports D1 D2
- Nov 08 16:33:50 bullseye kernel: pci 0000:3b:00.0: PME# supported from D0 D1 D2 D3hot D3cold
- Nov 08 16:33:50 bullseye kernel: pci 0000:00:1c.6: PCI bridge to [bus 3b-5f]
- Nov 08 16:33:50 bullseye kernel: pci 0000:00:1c.6: bridge window [io 0x3000-0x4fff]
- Nov 08 16:33:50 bullseye kernel: pci 0000:00:1c.6: bridge window [mem 0xcc000000-0xd01fffff]
- Nov 08 16:33:50 bullseye kernel: pci 0000:3c:01.0: [12d8:2404] type 01 class 0x060400
- Nov 08 16:33:50 bullseye kernel: pci 0000:3c:01.0: supports D1 D2
- Nov 08 16:33:50 bullseye kernel: pci 0000:3c:01.0: PME# supported from D0 D1 D2 D3hot D3cold
- Nov 08 16:33:50 bullseye kernel: pci 0000:3c:02.0: [12d8:2404] type 01 class 0x060400
- Nov 08 16:33:50 bullseye kernel: pci 0000:3c:02.0: supports D1 D2
- Nov 08 16:33:50 bullseye kernel: pci 0000:3c:02.0: PME# supported from D0 D1 D2 D3hot D3cold
- Nov 08 16:33:50 bullseye kernel: pci 0000:3c:03.0: [12d8:2404] type 01 class 0x060400
- Nov 08 16:33:50 bullseye kernel: pci 0000:3c:03.0: supports D1 D2
- Nov 08 16:33:50 bullseye kernel: pci 0000:3c:03.0: PME# supported from D0 D1 D2 D3hot D3cold
- Nov 08 16:33:50 bullseye kernel: pci 0000:3b:00.0: PCI bridge to [bus 3c-5f]
- Nov 08 16:33:50 bullseye kernel: pci 0000:3b:00.0: bridge window [io 0x3000-0x4fff]
- Nov 08 16:33:50 bullseye kernel: pci 0000:3b:00.0: bridge window [mem 0xcc000000-0xd01fffff]
- Nov 08 16:33:50 bullseye kernel: pci 0000:3d:00.0: [8086:08b1] type 00 class 0x028000
- Nov 08 16:33:50 bullseye kernel: pci 0000:3d:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit]
- Nov 08 16:33:50 bullseye kernel: pci 0000:3d:00.0: PME# supported from D0 D3hot D3cold
- Nov 08 16:33:50 bullseye kernel: pci 0000:3c:01.0: PCI bridge to [bus 3d]
- Nov 08 16:33:50 bullseye kernel: pci 0000:3c:01.0: bridge window [mem 0xd0100000-0xd01fffff]
- Nov 08 16:33:50 bullseye kernel: pci 0000:3c:02.0: PCI bridge to [bus 3e-5e]
- Nov 08 16:33:50 bullseye kernel: pci 0000:3c:02.0: bridge window [io 0x3000-0x4fff]
- Nov 08 16:33:50 bullseye kernel: pci 0000:3c:02.0: bridge window [mem 0xcc000000-0xcfffffff]
- Nov 08 16:33:50 bullseye kernel: pci 0000:5f:00.0: [10ec:5249] type 00 class 0xff0000
- Nov 08 16:33:50 bullseye kernel: pci 0000:5f:00.0: reg 0x10: [mem 0xd0000000-0xd0000fff]
- Nov 08 16:33:50 bullseye kernel: pci 0000:5f:00.0: supports D1 D2
- Nov 08 16:33:50 bullseye kernel: pci 0000:5f:00.0: PME# supported from D1 D2 D3hot D3cold
- Nov 08 16:33:50 bullseye kernel: pci 0000:3c:03.0: PCI bridge to [bus 5f]
- Nov 08 16:33:50 bullseye kernel: pci 0000:3c:03.0: bridge window [mem 0xd0000000-0xd00fffff]
- Nov 08 16:33:50 bullseye kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 *10 11 12 14 15)
- Nov 08 16:33:50 bullseye kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
- Nov 08 16:33:50 bullseye kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
- Nov 08 16:33:50 bullseye kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
- Nov 08 16:33:50 bullseye kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 10 11 12 14 15)
- Nov 08 16:33:50 bullseye kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
- Nov 08 16:33:50 bullseye kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *10 11 12 14 15)
- Nov 08 16:33:50 bullseye kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
- Nov 08 16:33:50 bullseye kernel: ACPI: EC: interrupt unblocked
- Nov 08 16:33:50 bullseye kernel: ACPI: EC: event unblocked
- Nov 08 16:33:50 bullseye kernel: ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
- Nov 08 16:33:50 bullseye kernel: ACPI: EC: GPE=0x16
- Nov 08 16:33:50 bullseye kernel: ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC initialization complete
- Nov 08 16:33:50 bullseye kernel: ACPI: \_SB_.PCI0.LPCB.EC0_: EC: Used to handle transactions and events
- Nov 08 16:33:50 bullseye kernel: iommu: Default domain type: Translated
- Nov 08 16:33:50 bullseye kernel: pci 0000:01:00.0: vgaarb: setting as boot VGA device
- Nov 08 16:33:50 bullseye kernel: pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
- Nov 08 16:33:50 bullseye kernel: pci 0000:01:00.0: vgaarb: bridge control possible
- Nov 08 16:33:50 bullseye kernel: vgaarb: loaded
- Nov 08 16:33:50 bullseye kernel: EDAC MC: Ver: 3.0.0
- Nov 08 16:33:50 bullseye kernel: NetLabel: Initializing
- Nov 08 16:33:50 bullseye kernel: NetLabel: domain hash size = 128
- Nov 08 16:33:50 bullseye kernel: NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
- Nov 08 16:33:50 bullseye kernel: NetLabel: unlabeled traffic allowed by default
- Nov 08 16:33:50 bullseye kernel: PCI: Using ACPI for IRQ routing
- Nov 08 16:33:50 bullseye kernel: PCI: pci_cache_line_size set to 64 bytes
- Nov 08 16:33:50 bullseye kernel: e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff]
- Nov 08 16:33:50 bullseye kernel: e820: reserve RAM buffer [mem 0x5cb7f000-0x5fffffff]
- Nov 08 16:33:50 bullseye kernel: e820: reserve RAM buffer [mem 0x5e000000-0x5fffffff]
- Nov 08 16:33:50 bullseye kernel: e820: reserve RAM buffer [mem 0x59e000000-0x59fffffff]
- Nov 08 16:33:50 bullseye kernel: hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
- Nov 08 16:33:50 bullseye kernel: hpet0: 8 comparators, 64-bit 14.318180 MHz counter
- Nov 08 16:33:50 bullseye kernel: clocksource: Switched to clocksource tsc-early
- Nov 08 16:33:50 bullseye kernel: VFS: Disk quotas dquot_6.6.0
- Nov 08 16:33:50 bullseye kernel: VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- Nov 08 16:33:50 bullseye kernel: AppArmor: AppArmor Filesystem Enabled
- Nov 08 16:33:50 bullseye kernel: pnp: PnP ACPI init
- Nov 08 16:33:50 bullseye kernel: pnp 00:00: disabling [mem 0x00000000-0x00000fff] because it overlaps 0000:3d:00.0 BAR 0 [mem 0x00000000-0x00001fff 64bit]
- Nov 08 16:33:50 bullseye kernel: system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
- Nov 08 16:33:50 bullseye kernel: system 00:00: [mem 0xfed10000-0xfed17fff] could not be reserved
- Nov 08 16:33:50 bullseye kernel: system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
- Nov 08 16:33:50 bullseye kernel: system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
- Nov 08 16:33:50 bullseye kernel: system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
- Nov 08 16:33:50 bullseye kernel: system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
- Nov 08 16:33:50 bullseye kernel: system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
- Nov 08 16:33:50 bullseye kernel: system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
- Nov 08 16:33:50 bullseye kernel: system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
- Nov 08 16:33:50 bullseye kernel: system 00:00: [mem 0x60010000-0x6001ffff] has been reserved
- Nov 08 16:33:50 bullseye kernel: system 00:00: [mem 0x60000000-0x6000ffff] has been reserved
- Nov 08 16:33:50 bullseye kernel: system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
- Nov 08 16:33:50 bullseye kernel: system 00:01: [io 0x0200-0x020f] has been reserved
- Nov 08 16:33:50 bullseye kernel: system 00:01: [io 0x0220-0x027f] has been reserved
- Nov 08 16:33:50 bullseye kernel: system 00:01: [io 0xffff] has been reserved
- Nov 08 16:33:50 bullseye kernel: system 00:01: [io 0xffff] has been reserved
- Nov 08 16:33:50 bullseye kernel: system 00:01: [io 0xffff] has been reserved
- Nov 08 16:33:50 bullseye kernel: system 00:01: [io 0x1800-0x18fe] has been reserved
- Nov 08 16:33:50 bullseye kernel: system 00:01: [io 0xef80-0xef9f] has been reserved
- Nov 08 16:33:50 bullseye kernel: system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
- Nov 08 16:33:50 bullseye kernel: system 00:02: [io 0x0800-0x087f] has been reserved
- Nov 08 16:33:50 bullseye kernel: system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
- Nov 08 16:33:50 bullseye kernel: pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
- Nov 08 16:33:50 bullseye kernel: pnp 00:04: [dma 0 disabled]
- Nov 08 16:33:50 bullseye kernel: pnp 00:04: Plug and Play ACPI device, IDs PNP0401 (active)
- Nov 08 16:33:50 bullseye kernel: pnp 00:05: Plug and Play ACPI device, IDs HPQ8002 PNP0303 (active)
- Nov 08 16:33:50 bullseye kernel: pnp 00:06: Plug and Play ACPI device, IDs SYN3013 SYN0100 SYN0002 PNP0f13 (active)
- Nov 08 16:33:50 bullseye kernel: pnp 00:07: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
- Nov 08 16:33:50 bullseye kernel: pnp: PnP ACPI: found 8 devices
- Nov 08 16:33:50 bullseye kernel: clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
- Nov 08 16:33:50 bullseye kernel: NET: Registered protocol family 2
- Nov 08 16:33:50 bullseye kernel: tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear)
- Nov 08 16:33:50 bullseye kernel: TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
- Nov 08 16:33:50 bullseye kernel: TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
- Nov 08 16:33:50 bullseye kernel: TCP: Hash tables configured (established 262144 bind 65536)
- Nov 08 16:33:50 bullseye kernel: UDP hash table entries: 16384 (order: 7, 524288 bytes, linear)
- Nov 08 16:33:50 bullseye kernel: UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear)
- Nov 08 16:33:50 bullseye kernel: NET: Registered protocol family 1
- Nov 08 16:33:50 bullseye kernel: NET: Registered protocol family 44
- Nov 08 16:33:50 bullseye kernel: pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
- Nov 08 16:33:50 bullseye kernel: pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02-3a] add_size 1000
- Nov 08 16:33:50 bullseye kernel: pci 0000:3c:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 3e-5e] add_size 200000 add_align 100000
- Nov 08 16:33:50 bullseye kernel: pci 0000:3c:03.0: bridge window [io 0x1000-0x0fff] to [bus 5f] add_size 1000
- Nov 08 16:33:50 bullseye kernel: pci 0000:3c:03.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 5f] add_size 200000 add_align 100000
- Nov 08 16:33:50 bullseye kernel: pci 0000:3b:00.0: bridge window [mem 0x00100000-0x002fffff 64bit pref] to [bus 3c-5f] add_size 400000 add_align 100000
- Nov 08 16:33:50 bullseye kernel: pci 0000:00:1c.6: bridge window [mem 0x00100000-0x002fffff 64bit pref] to [bus 3b-5f] add_size 400000 add_align 100000
- Nov 08 16:33:50 bullseye kernel: pci 0000:00:1c.6: BAR 15: assigned [mem 0x60100000-0x606fffff 64bit pref]
- Nov 08 16:33:50 bullseye kernel: pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
- Nov 08 16:33:50 bullseye kernel: pci 0000:01:00.0: BAR 6: assigned [mem 0xd2080000-0xd20fffff pref]
- Nov 08 16:33:50 bullseye kernel: pci 0000:00:01.0: PCI bridge to [bus 01]
- Nov 08 16:33:50 bullseye kernel: pci 0000:00:01.0: bridge window [io 0x5000-0x5fff]
- Nov 08 16:33:50 bullseye kernel: pci 0000:00:01.0: bridge window [mem 0xd1000000-0xd20fffff]
- Nov 08 16:33:50 bullseye kernel: pci 0000:00:01.0: bridge window [mem 0x70000000-0x81ffffff 64bit pref]
- Nov 08 16:33:50 bullseye kernel: pci 0000:00:1c.0: PCI bridge to [bus 02-3a]
- Nov 08 16:33:50 bullseye kernel: pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
- Nov 08 16:33:50 bullseye kernel: pci 0000:00:1c.0: bridge window [mem 0xb4000000-0xca0fffff]
- Nov 08 16:33:50 bullseye kernel: pci 0000:00:1c.0: bridge window [mem 0x90000000-0xb1ffffff 64bit pref]
- Nov 08 16:33:50 bullseye kernel: pci 0000:3b:00.0: BAR 15: assigned [mem 0x60100000-0x606fffff 64bit pref]
- Nov 08 16:33:50 bullseye kernel: pci 0000:3c:02.0: BAR 15: assigned [mem 0x60100000-0x602fffff 64bit pref]
- Nov 08 16:33:50 bullseye kernel: pci 0000:3c:03.0: BAR 15: assigned [mem 0x60300000-0x604fffff 64bit pref]
- Nov 08 16:33:50 bullseye kernel: pci 0000:3c:03.0: BAR 13: no space for [io size 0x1000]
- Nov 08 16:33:50 bullseye kernel: pci 0000:3c:03.0: BAR 13: failed to assign [io size 0x1000]
- Nov 08 16:33:50 bullseye kernel: pci 0000:3c:03.0: BAR 13: no space for [io size 0x1000]
- Nov 08 16:33:50 bullseye kernel: pci 0000:3c:03.0: BAR 13: failed to assign [io size 0x1000]
- Nov 08 16:33:50 bullseye kernel: pci 0000:3d:00.0: BAR 0: assigned [mem 0xd0100000-0xd0101fff 64bit]
- Nov 08 16:33:50 bullseye kernel: pci 0000:3c:01.0: PCI bridge to [bus 3d]
- Nov 08 16:33:50 bullseye kernel: pci 0000:3c:01.0: bridge window [mem 0xd0100000-0xd01fffff]
- Nov 08 16:33:50 bullseye kernel: pci 0000:3c:02.0: PCI bridge to [bus 3e-5e]
- Nov 08 16:33:50 bullseye kernel: pci 0000:3c:02.0: bridge window [io 0x3000-0x4fff]
- Nov 08 16:33:50 bullseye kernel: pci 0000:3c:02.0: bridge window [mem 0xcc000000-0xcfffffff]
- Nov 08 16:33:50 bullseye kernel: pci 0000:3c:02.0: bridge window [mem 0x60100000-0x602fffff 64bit pref]
- Nov 08 16:33:50 bullseye kernel: pci 0000:3c:03.0: PCI bridge to [bus 5f]
- Nov 08 16:33:50 bullseye kernel: pci 0000:3c:03.0: bridge window [mem 0xd0000000-0xd00fffff]
- Nov 08 16:33:50 bullseye kernel: pci 0000:3c:03.0: bridge window [mem 0x60300000-0x604fffff 64bit pref]
- Nov 08 16:33:50 bullseye kernel: pci 0000:3b:00.0: PCI bridge to [bus 3c-5f]
- Nov 08 16:33:50 bullseye kernel: pci 0000:3b:00.0: bridge window [io 0x3000-0x4fff]
- Nov 08 16:33:50 bullseye kernel: pci 0000:3b:00.0: bridge window [mem 0xcc000000-0xd01fffff]
- Nov 08 16:33:50 bullseye kernel: pci 0000:3b:00.0: bridge window [mem 0x60100000-0x606fffff 64bit pref]
- Nov 08 16:33:50 bullseye kernel: pci 0000:00:1c.6: PCI bridge to [bus 3b-5f]
- Nov 08 16:33:50 bullseye kernel: pci 0000:00:1c.6: bridge window [io 0x3000-0x4fff]
- Nov 08 16:33:50 bullseye kernel: pci 0000:00:1c.6: bridge window [mem 0xcc000000-0xd01fffff]
- Nov 08 16:33:50 bullseye kernel: pci 0000:00:1c.6: bridge window [mem 0x60100000-0x606fffff 64bit pref]
- Nov 08 16:33:50 bullseye kernel: pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
- Nov 08 16:33:50 bullseye kernel: pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
- Nov 08 16:33:50 bullseye kernel: pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
- Nov 08 16:33:50 bullseye kernel: pci_bus 0000:00: resource 7 [mem 0x60000000-0xdfffffff window]
- Nov 08 16:33:50 bullseye kernel: pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfed3ffff window]
- Nov 08 16:33:50 bullseye kernel: pci_bus 0000:00: resource 9 [mem 0xfed45000-0xfedfffff window]
- Nov 08 16:33:50 bullseye kernel: pci_bus 0000:00: resource 10 [mem 0xfee01000-0xffffffff window]
- Nov 08 16:33:50 bullseye kernel: pci_bus 0000:01: resource 0 [io 0x5000-0x5fff]
- Nov 08 16:33:50 bullseye kernel: pci_bus 0000:01: resource 1 [mem 0xd1000000-0xd20fffff]
- Nov 08 16:33:50 bullseye kernel: pci_bus 0000:01: resource 2 [mem 0x70000000-0x81ffffff 64bit pref]
- Nov 08 16:33:50 bullseye kernel: pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
- Nov 08 16:33:50 bullseye kernel: pci_bus 0000:02: resource 1 [mem 0xb4000000-0xca0fffff]
- Nov 08 16:33:50 bullseye kernel: pci_bus 0000:02: resource 2 [mem 0x90000000-0xb1ffffff 64bit pref]
- Nov 08 16:33:50 bullseye kernel: pci_bus 0000:3b: resource 0 [io 0x3000-0x4fff]
- Nov 08 16:33:50 bullseye kernel: pci_bus 0000:3b: resource 1 [mem 0xcc000000-0xd01fffff]
- Nov 08 16:33:50 bullseye kernel: pci_bus 0000:3b: resource 2 [mem 0x60100000-0x606fffff 64bit pref]
- Nov 08 16:33:50 bullseye kernel: pci_bus 0000:3c: resource 0 [io 0x3000-0x4fff]
- Nov 08 16:33:50 bullseye kernel: pci_bus 0000:3c: resource 1 [mem 0xcc000000-0xd01fffff]
- Nov 08 16:33:50 bullseye kernel: pci_bus 0000:3c: resource 2 [mem 0x60100000-0x606fffff 64bit pref]
- Nov 08 16:33:50 bullseye kernel: pci_bus 0000:3d: resource 1 [mem 0xd0100000-0xd01fffff]
- Nov 08 16:33:50 bullseye kernel: pci_bus 0000:3e: resource 0 [io 0x3000-0x4fff]
- Nov 08 16:33:50 bullseye kernel: pci_bus 0000:3e: resource 1 [mem 0xcc000000-0xcfffffff]
- Nov 08 16:33:50 bullseye kernel: pci_bus 0000:3e: resource 2 [mem 0x60100000-0x602fffff 64bit pref]
- Nov 08 16:33:50 bullseye kernel: pci_bus 0000:5f: resource 1 [mem 0xd0000000-0xd00fffff]
- Nov 08 16:33:50 bullseye kernel: pci_bus 0000:5f: resource 2 [mem 0x60300000-0x604fffff 64bit pref]
- Nov 08 16:33:50 bullseye kernel: pci 0000:00:14.0: enabling device (0000 -> 0002)
- Nov 08 16:33:50 bullseye kernel: pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
- Nov 08 16:33:50 bullseye kernel: pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
- Nov 08 16:33:50 bullseye kernel: PCI: CLS 64 bytes, default 64
- Nov 08 16:33:50 bullseye kernel: Trying to unpack rootfs image as initramfs...
- Nov 08 16:33:50 bullseye kernel: Freeing initrd memory: 61328K
- Nov 08 16:33:50 bullseye kernel: PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
- Nov 08 16:33:50 bullseye kernel: software IO TLB: mapped [mem 0x58b7f000-0x5cb7f000] (64MB)
- Nov 08 16:33:50 bullseye kernel: Initialise system trusted keyrings
- Nov 08 16:33:50 bullseye kernel: Key type blacklist registered
- Nov 08 16:33:50 bullseye kernel: workingset: timestamp_bits=40 max_order=23 bucket_order=0
- Nov 08 16:33:50 bullseye kernel: zbud: loaded
- Nov 08 16:33:50 bullseye kernel: integrity: Platform Keyring initialized
- Nov 08 16:33:50 bullseye kernel: Key type asymmetric registered
- Nov 08 16:33:50 bullseye kernel: Asymmetric key parser 'x509' registered
- Nov 08 16:33:50 bullseye kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
- Nov 08 16:33:50 bullseye kernel: io scheduler mq-deadline registered
- Nov 08 16:33:50 bullseye kernel: pcieport 0000:00:01.0: PME: Signaling with IRQ 24
- Nov 08 16:33:50 bullseye kernel: pcieport 0000:00:1c.0: PME: Signaling with IRQ 25
- Nov 08 16:33:50 bullseye kernel: pcieport 0000:00:1c.0: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
- Nov 08 16:33:50 bullseye kernel: pcieport 0000:00:1c.6: PME: Signaling with IRQ 26
- Nov 08 16:33:50 bullseye kernel: pcieport 0000:3c:02.0: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- IbPresDis- LLActRep+
- Nov 08 16:33:50 bullseye kernel: pcieport 0000:3c:03.0: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- IbPresDis- LLActRep+
- Nov 08 16:33:50 bullseye kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
- Nov 08 16:33:50 bullseye kernel: intel_idle: MWAIT substates: 0x42120
- Nov 08 16:33:50 bullseye kernel: intel_idle: v0.5.1 model 0x3C
- Nov 08 16:33:50 bullseye kernel: intel_idle: Local APIC timer is reliable in all C-states
- Nov 08 16:33:50 bullseye kernel: thermal LNXTHERM:00: registered as thermal_zone0
- Nov 08 16:33:50 bullseye kernel: ACPI: Thermal Zone [CPUZ] (50 C)
- Nov 08 16:33:50 bullseye kernel: thermal LNXTHERM:01: registered as thermal_zone1
- Nov 08 16:33:50 bullseye kernel: ACPI: Thermal Zone [GFXZ] (46 C)
- Nov 08 16:33:50 bullseye kernel: thermal LNXTHERM:02: registered as thermal_zone2
- Nov 08 16:33:50 bullseye kernel: ACPI: Thermal Zone [EXTZ] (85 C)
- Nov 08 16:33:50 bullseye kernel: thermal LNXTHERM:03: registered as thermal_zone3
- Nov 08 16:33:50 bullseye kernel: ACPI: Thermal Zone [LOCZ] (85 C)
- Nov 08 16:33:50 bullseye kernel: thermal LNXTHERM:04: registered as thermal_zone4
- Nov 08 16:33:50 bullseye kernel: ACPI: Thermal Zone [BATZ] (26 C)
- Nov 08 16:33:50 bullseye kernel: thermal LNXTHERM:05: registered as thermal_zone5
- Nov 08 16:33:50 bullseye kernel: ACPI: Thermal Zone [PCHZ] (84 C)
- Nov 08 16:33:50 bullseye kernel: Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- Nov 08 16:33:50 bullseye kernel: 0000:00:16.3: ttyS0 at I/O 0x6070 (irq = 19, base_baud = 115200) is a 16550A
- Nov 08 16:33:50 bullseye kernel: Linux agpgart interface v0.103
- Nov 08 16:33:50 bullseye kernel: AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
- Nov 08 16:33:50 bullseye kernel: AMD-Vi: AMD IOMMUv2 functionality not available on this system
- Nov 08 16:33:50 bullseye kernel: i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
- Nov 08 16:33:50 bullseye kernel: i8042: Detected active multiplexing controller, rev 1.1
- Nov 08 16:33:50 bullseye kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
- Nov 08 16:33:50 bullseye kernel: serio: i8042 AUX0 port at 0x60,0x64 irq 12
- Nov 08 16:33:50 bullseye kernel: serio: i8042 AUX1 port at 0x60,0x64 irq 12
- Nov 08 16:33:50 bullseye kernel: serio: i8042 AUX2 port at 0x60,0x64 irq 12
- Nov 08 16:33:50 bullseye kernel: serio: i8042 AUX3 port at 0x60,0x64 irq 12
- Nov 08 16:33:50 bullseye kernel: mousedev: PS/2 mouse device common for all mice
- Nov 08 16:33:50 bullseye kernel: rtc_cmos 00:03: RTC can wake from S4
- Nov 08 16:33:50 bullseye kernel: rtc_cmos 00:03: registered as rtc0
- Nov 08 16:33:50 bullseye kernel: rtc_cmos 00:03: setting system clock to 2020-11-08T16:33:42 UTC (1604853222)
- Nov 08 16:33:50 bullseye kernel: rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
- Nov 08 16:33:50 bullseye kernel: intel_pstate: Intel P-state driver initializing
- Nov 08 16:33:50 bullseye kernel: ledtrig-cpu: registered to indicate activity on CPUs
- Nov 08 16:33:50 bullseye kernel: NET: Registered protocol family 10
- Nov 08 16:33:50 bullseye kernel: Segment Routing with IPv6
- Nov 08 16:33:50 bullseye kernel: mip6: Mobile IPv6
- Nov 08 16:33:50 bullseye kernel: NET: Registered protocol family 17
- Nov 08 16:33:50 bullseye kernel: mpls_gso: MPLS GSO support
- Nov 08 16:33:50 bullseye kernel: microcode: sig=0x306c3, pf=0x10, revision=0x28
- Nov 08 16:33:50 bullseye kernel: microcode: Microcode Update Driver: v2.2.
- Nov 08 16:33:50 bullseye kernel: IPI shorthand broadcast: enabled
- Nov 08 16:33:50 bullseye kernel: sched_clock: Marking stable (5384319726, 17301277)->(5408962381, -7341378)
- Nov 08 16:33:50 bullseye kernel: registered taskstats version 1
- Nov 08 16:33:50 bullseye kernel: Loading compiled-in X.509 certificates
- Nov 08 16:33:50 bullseye kernel: input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
- Nov 08 16:33:50 bullseye kernel: Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
- Nov 08 16:33:50 bullseye kernel: Loaded X.509 cert 'Debian Secure Boot Signer 2020: 00b55eb3b9'
- Nov 08 16:33:50 bullseye kernel: zswap: loaded using pool lzo/zbud
- Nov 08 16:33:50 bullseye kernel: Key type ._fscrypt registered
- Nov 08 16:33:50 bullseye kernel: Key type .fscrypt registered
- Nov 08 16:33:50 bullseye kernel: Key type fscrypt-provisioning registered
- Nov 08 16:33:50 bullseye kernel: AppArmor: AppArmor sha1 policy hashing enabled
- Nov 08 16:33:50 bullseye kernel: Freeing unused kernel image (initmem) memory: 1636K
- Nov 08 16:33:50 bullseye kernel: Write protecting the kernel read-only data: 18432k
- Nov 08 16:33:50 bullseye kernel: Freeing unused kernel image (text/rodata gap) memory: 2044K
- Nov 08 16:33:50 bullseye kernel: Freeing unused kernel image (rodata/data gap) memory: 332K
- Nov 08 16:33:50 bullseye kernel: x86/mm: Checked W+X mappings: passed, no W+X pages found.
- Nov 08 16:33:50 bullseye kernel: x86/mm: Checking user space page tables
- Nov 08 16:33:50 bullseye kernel: x86/mm: Checked W+X mappings: passed, no W+X pages found.
- Nov 08 16:33:50 bullseye kernel: Run /init as init process
- Nov 08 16:33:50 bullseye kernel: with arguments:
- Nov 08 16:33:50 bullseye kernel: /init
- Nov 08 16:33:50 bullseye kernel: single
- Nov 08 16:33:50 bullseye kernel: with environment:
- Nov 08 16:33:50 bullseye kernel: HOME=/
- Nov 08 16:33:50 bullseye kernel: TERM=linux
- Nov 08 16:33:50 bullseye kernel: BOOT_IMAGE=/boot/vmlinuz-5.9.0-1-amd64
- Nov 08 16:33:50 bullseye kernel: input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5
- Nov 08 16:33:50 bullseye kernel: ACPI: Sleep Button [SLPB]
- Nov 08 16:33:50 bullseye kernel: input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input6
- Nov 08 16:33:50 bullseye kernel: ACPI: Lid Switch [LID]
- Nov 08 16:33:50 bullseye kernel: input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
- Nov 08 16:33:50 bullseye kernel: acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
- Nov 08 16:33:50 bullseye kernel: ACPI: Video Device [DGFX] (multi-head: yes rom: yes post: no)
- Nov 08 16:33:50 bullseye kernel: acpi device:01: registered as cooling_device8
- Nov 08 16:33:50 bullseye kernel: input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input8
- Nov 08 16:33:50 bullseye kernel: pps_core: LinuxPPS API ver. 1 registered
- Nov 08 16:33:50 bullseye kernel: pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
- Nov 08 16:33:50 bullseye kernel: PTP clock support registered
- Nov 08 16:33:50 bullseye kernel: ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20200717/utaddress-204)
- Nov 08 16:33:50 bullseye kernel: ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
- Nov 08 16:33:50 bullseye kernel: ACPI Warning: SystemIO range 0x0000000000000840-0x000000000000084F conflicts with OpRegion 0x0000000000000800-0x0000000000000BFF (\GPIO) (20200717/utaddress-204)
- Nov 08 16:33:50 bullseye kernel: ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
- Nov 08 16:33:50 bullseye kernel: ACPI Warning: SystemIO range 0x0000000000000830-0x000000000000083F conflicts with OpRegion 0x0000000000000800-0x000000000000083F (\GPRL) (20200717/utaddress-204)
- Nov 08 16:33:50 bullseye kernel: ACPI Warning: SystemIO range 0x0000000000000830-0x000000000000083F conflicts with OpRegion 0x0000000000000800-0x0000000000000BFF (\GPIO) (20200717/utaddress-204)
- Nov 08 16:33:50 bullseye kernel: ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
- Nov 08 16:33:50 bullseye kernel: ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082F conflicts with OpRegion 0x0000000000000810-0x0000000000000813 (\_PR.IO_D) (20200717/utaddress-204)
- Nov 08 16:33:50 bullseye kernel: ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000083F (\GPRL) (20200717/utaddress-204)
- Nov 08 16:33:50 bullseye kernel: ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x0000000000000BFF (\GPIO) (20200717/utaddress-204)
- Nov 08 16:33:50 bullseye kernel: ACPI: Power Button [PWRF]
- Nov 08 16:33:50 bullseye kernel: ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082F conflicts with OpRegion 0x0000000000000810-0x0000000000000813 (\IO_D) (20200717/utaddress-204)
- Nov 08 16:33:50 bullseye kernel: ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000080F (\IO_T) (20200717/utaddress-204)
- Nov 08 16:33:50 bullseye kernel: ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
- Nov 08 16:33:50 bullseye kernel: lpc_ich: Resource conflict(s) found affecting gpio_ich
- Nov 08 16:33:50 bullseye kernel: e1000e: Intel(R) PRO/1000 Network Driver
- Nov 08 16:33:50 bullseye kernel: e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
- Nov 08 16:33:50 bullseye kernel: e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
- Nov 08 16:33:50 bullseye kernel: SCSI subsystem initialized
- Nov 08 16:33:50 bullseye kernel: i801_smbus 0000:00:1f.3: SPD Write Disable is set
- Nov 08 16:33:50 bullseye kernel: i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
- Nov 08 16:33:50 bullseye kernel: ACPI: bus type USB registered
- Nov 08 16:33:50 bullseye kernel: usbcore: registered new interface driver usbfs
- Nov 08 16:33:50 bullseye kernel: usbcore: registered new interface driver hub
- Nov 08 16:33:50 bullseye kernel: usbcore: registered new device driver usb
- Nov 08 16:33:50 bullseye kernel: i2c i2c-0: 3/4 memory slots populated (from DMI)
- Nov 08 16:33:50 bullseye kernel: i2c i2c-0: Successfully instantiated SPD at 0x50
- Nov 08 16:33:50 bullseye kernel: i2c i2c-0: Successfully instantiated SPD at 0x52
- Nov 08 16:33:50 bullseye kernel: i2c i2c-0: Successfully instantiated SPD at 0x53
- Nov 08 16:33:50 bullseye kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- Nov 08 16:33:50 bullseye kernel: ehci-pci: EHCI PCI platform driver
- Nov 08 16:33:50 bullseye kernel: ehci-pci 0000:00:1a.0: EHCI Host Controller
- Nov 08 16:33:50 bullseye kernel: ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
- Nov 08 16:33:50 bullseye kernel: ehci-pci 0000:00:1a.0: debug port 2
- Nov 08 16:33:50 bullseye kernel: libata version 3.00 loaded.
- Nov 08 16:33:50 bullseye kernel: ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
- Nov 08 16:33:50 bullseye kernel: ehci-pci 0000:00:1a.0: irq 16, io mem 0xd2136000
- Nov 08 16:33:50 bullseye kernel: ahci 0000:00:1f.2: version 3.0
- Nov 08 16:33:50 bullseye kernel: ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
- Nov 08 16:33:50 bullseye kernel: ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0xf impl SATA mode
- Nov 08 16:33:50 bullseye kernel: ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems sxs apst
- Nov 08 16:33:50 bullseye kernel: battery: ACPI: Battery Slot [BAT0] (battery present)
- Nov 08 16:33:50 bullseye kernel: battery: ACPI: Battery Slot [BAT1] (battery absent)
- Nov 08 16:33:50 bullseye kernel: ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
- Nov 08 16:33:50 bullseye kernel: usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.09
- Nov 08 16:33:50 bullseye kernel: usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- Nov 08 16:33:50 bullseye kernel: usb usb1: Product: EHCI Host Controller
- Nov 08 16:33:50 bullseye kernel: usb usb1: Manufacturer: Linux 5.9.0-1-amd64 ehci_hcd
- Nov 08 16:33:50 bullseye kernel: usb usb1: SerialNumber: 0000:00:1a.0
- Nov 08 16:33:50 bullseye kernel: hub 1-0:1.0: USB hub found
- Nov 08 16:33:50 bullseye kernel: hub 1-0:1.0: 3 ports detected
- Nov 08 16:33:50 bullseye kernel: xhci_hcd 0000:00:14.0: xHCI Host Controller
- Nov 08 16:33:50 bullseye kernel: xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
- Nov 08 16:33:50 bullseye kernel: xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810
- Nov 08 16:33:50 bullseye kernel: xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
- Nov 08 16:33:50 bullseye kernel: usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.09
- Nov 08 16:33:50 bullseye kernel: usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- Nov 08 16:33:50 bullseye kernel: usb usb2: Product: xHCI Host Controller
- Nov 08 16:33:50 bullseye kernel: usb usb2: Manufacturer: Linux 5.9.0-1-amd64 xhci-hcd
- Nov 08 16:33:50 bullseye kernel: usb usb2: SerialNumber: 0000:00:14.0
- Nov 08 16:33:50 bullseye kernel: hub 2-0:1.0: USB hub found
- Nov 08 16:33:50 bullseye kernel: hub 2-0:1.0: 15 ports detected
- Nov 08 16:33:50 bullseye kernel: ehci-pci 0000:00:1d.0: EHCI Host Controller
- Nov 08 16:33:50 bullseye kernel: xhci_hcd 0000:00:14.0: xHCI Host Controller
- Nov 08 16:33:50 bullseye kernel: ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3
- Nov 08 16:33:50 bullseye kernel: xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
- Nov 08 16:33:50 bullseye kernel: ehci-pci 0000:00:1d.0: debug port 2
- Nov 08 16:33:50 bullseye kernel: xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
- Nov 08 16:33:50 bullseye kernel: usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.09
- Nov 08 16:33:50 bullseye kernel: usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- Nov 08 16:33:50 bullseye kernel: usb usb4: Product: xHCI Host Controller
- Nov 08 16:33:50 bullseye kernel: usb usb4: Manufacturer: Linux 5.9.0-1-amd64 xhci-hcd
- Nov 08 16:33:50 bullseye kernel: usb usb4: SerialNumber: 0000:00:14.0
- Nov 08 16:33:50 bullseye kernel: hub 4-0:1.0: USB hub found
- Nov 08 16:33:50 bullseye kernel: hub 4-0:1.0: 6 ports detected
- Nov 08 16:33:50 bullseye kernel: usb: port power management may be unreliable
- Nov 08 16:33:50 bullseye kernel: ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
- Nov 08 16:33:50 bullseye kernel: ehci-pci 0000:00:1d.0: irq 17, io mem 0xd2135000
- Nov 08 16:33:50 bullseye kernel: ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
- Nov 08 16:33:50 bullseye kernel: usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.09
- Nov 08 16:33:50 bullseye kernel: usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- Nov 08 16:33:50 bullseye kernel: usb usb3: Product: EHCI Host Controller
- Nov 08 16:33:50 bullseye kernel: usb usb3: Manufacturer: Linux 5.9.0-1-amd64 ehci_hcd
- Nov 08 16:33:50 bullseye kernel: usb usb3: SerialNumber: 0000:00:1d.0
- Nov 08 16:33:50 bullseye kernel: hub 3-0:1.0: USB hub found
- Nov 08 16:33:50 bullseye kernel: hub 3-0:1.0: 3 ports detected
- Nov 08 16:33:50 bullseye kernel: scsi host0: ahci
- Nov 08 16:33:50 bullseye kernel: scsi host1: ahci
- Nov 08 16:33:50 bullseye kernel: scsi host2: ahci
- Nov 08 16:33:50 bullseye kernel: scsi host3: ahci
- Nov 08 16:33:50 bullseye kernel: scsi host4: ahci
- Nov 08 16:33:50 bullseye kernel: scsi host5: ahci
- Nov 08 16:33:50 bullseye kernel: ata1: SATA max UDMA/133 abar m2048@0xd2134000 port 0xd2134100 irq 32
- Nov 08 16:33:50 bullseye kernel: ata2: SATA max UDMA/133 abar m2048@0xd2134000 port 0xd2134180 irq 32
- Nov 08 16:33:50 bullseye kernel: ata3: SATA max UDMA/133 abar m2048@0xd2134000 port 0xd2134200 irq 32
- Nov 08 16:33:50 bullseye kernel: ata4: SATA max UDMA/133 abar m2048@0xd2134000 port 0xd2134280 irq 32
- Nov 08 16:33:50 bullseye kernel: ata5: DUMMY
- Nov 08 16:33:50 bullseye kernel: ata6: DUMMY
- Nov 08 16:33:50 bullseye kernel: e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
- Nov 08 16:33:50 bullseye kernel: e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 30:8d:99:78:61:2b
- Nov 08 16:33:50 bullseye kernel: e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
- Nov 08 16:33:50 bullseye kernel: e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
- Nov 08 16:33:50 bullseye kernel: e1000e 0000:00:19.0 enp0s25: renamed from eth0
- Nov 08 16:33:50 bullseye kernel: usb 1-1: new high-speed USB device number 2 using ehci-pci
- Nov 08 16:33:50 bullseye kernel: usb 2-2: new full-speed USB device number 2 using xhci_hcd
- Nov 08 16:33:50 bullseye kernel: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
- Nov 08 16:33:50 bullseye kernel: ata1.00: LPM support broken, forcing max_power
- Nov 08 16:33:50 bullseye kernel: ata1.00: ATA-8: ST1000LM024 HN-M101MBB, 2BA30001, max UDMA/133
- Nov 08 16:33:50 bullseye kernel: ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 32)
- Nov 08 16:33:50 bullseye kernel: ata1.00: LPM support broken, forcing max_power
- Nov 08 16:33:50 bullseye kernel: ata1.00: configured for UDMA/133
- Nov 08 16:33:50 bullseye kernel: usb 3-1: new high-speed USB device number 2 using ehci-pci
- Nov 08 16:33:50 bullseye kernel: scsi 0:0:0:0: Direct-Access ATA ST1000LM024 HN-M 0001 PQ: 0 ANSI: 5
- Nov 08 16:33:50 bullseye kernel: usb 2-2: New USB device found, idVendor=046d, idProduct=c534, bcdDevice=29.01
- Nov 08 16:33:50 bullseye kernel: usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- Nov 08 16:33:50 bullseye kernel: usb 2-2: Product: USB Receiver
- Nov 08 16:33:50 bullseye kernel: usb 2-2: Manufacturer: Logitech
- Nov 08 16:33:50 bullseye kernel: usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.04
- Nov 08 16:33:50 bullseye kernel: usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- Nov 08 16:33:50 bullseye kernel: hub 1-1:1.0: USB hub found
- Nov 08 16:33:50 bullseye kernel: hub 1-1:1.0: 6 ports detected
- Nov 08 16:33:50 bullseye kernel: hid: raw HID events driver (C) Jiri Kosina
- Nov 08 16:33:50 bullseye kernel: usbcore: registered new interface driver usbhid
- Nov 08 16:33:50 bullseye kernel: usbhid: USB HID core driver
- Nov 08 16:33:50 bullseye kernel: input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/0003:046D:C534.0001/input/input11
- Nov 08 16:33:50 bullseye kernel: usb 3-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.04
- Nov 08 16:33:50 bullseye kernel: usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- Nov 08 16:33:50 bullseye kernel: hub 3-1:1.0: USB hub found
- Nov 08 16:33:50 bullseye kernel: hub 3-1:1.0: 8 ports detected
- Nov 08 16:33:50 bullseye kernel: tsc: Refined TSC clocksource calibration: 2793.534 MHz
- Nov 08 16:33:50 bullseye kernel: clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x28446481b12, max_idle_ns: 440795279392 ns
- Nov 08 16:33:50 bullseye kernel: hid-generic 0003:046D:C534.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-2/input0
- Nov 08 16:33:50 bullseye kernel: clocksource: Switched to clocksource tsc
- Nov 08 16:33:50 bullseye kernel: input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.1/0003:046D:C534.0002/input/input12
- Nov 08 16:33:50 bullseye kernel: input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.1/0003:046D:C534.0002/input/input13
- Nov 08 16:33:50 bullseye kernel: usb 2-5: new full-speed USB device number 3 using xhci_hcd
- Nov 08 16:33:50 bullseye kernel: input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.1/0003:046D:C534.0002/input/input14
- Nov 08 16:33:50 bullseye kernel: hid-generic 0003:046D:C534.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-2/input1
- Nov 08 16:33:50 bullseye kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- Nov 08 16:33:50 bullseye kernel: ata2.00: ATAPI: hp DVDRW GUB0N, UB00, max UDMA/133
- Nov 08 16:33:50 bullseye kernel: ata2.00: configured for UDMA/133
- Nov 08 16:33:50 bullseye kernel: logitech-djreceiver 0003:046D:C534.0001: hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-2/input0
- Nov 08 16:33:50 bullseye kernel: scsi 1:0:0:0: CD-ROM hp DVDRW GUB0N UB00 PQ: 0 ANSI: 5
- Nov 08 16:33:50 bullseye kernel: usb 2-5: New USB device found, idVendor=138a, idProduct=003f, bcdDevice= 1.04
- Nov 08 16:33:50 bullseye kernel: usb 2-5: New USB device strings: Mfr=0, Product=0, SerialNumber=1
- Nov 08 16:33:50 bullseye kernel: usb 2-5: SerialNumber: 00a0a49f0996
- Nov 08 16:33:50 bullseye kernel: logitech-djreceiver 0003:046D:C534.0002: hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-2/input1
- Nov 08 16:33:50 bullseye kernel: logitech-djreceiver 0003:046D:C534.0002: device of type eQUAD nano Lite (0x0a) connected on slot 2
- Nov 08 16:33:50 bullseye kernel: input: Logitech Wireless Mouse PID:4054 Mouse as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.1/0003:046D:C534.0002/0003:046D:4054.0003/input/input17
- Nov 08 16:33:50 bullseye kernel: hid-generic 0003:046D:4054.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech Wireless Mouse PID:4054] on usb-0000:00:14.0-2/input1:2
- Nov 08 16:33:50 bullseye kernel: input: PS/2 Generic Mouse as /devices/platform/i8042/serio2/input/input10
- Nov 08 16:33:50 bullseye kernel: usb 2-7: new high-speed USB device number 4 using xhci_hcd
- Nov 08 16:33:50 bullseye kernel: input: Logitech Wireless Mouse as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.1/0003:046D:C534.0002/0003:046D:4054.0003/input/input22
- Nov 08 16:33:50 bullseye kernel: logitech-hidpp-device 0003:046D:4054.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech Wireless Mouse] on usb-0000:00:14.0-2/input1:2
- Nov 08 16:33:50 bullseye kernel: ata3: SATA link down (SStatus 0 SControl 300)
- Nov 08 16:33:50 bullseye kernel: usb 2-7: New USB device found, idVendor=04ca, idProduct=704d, bcdDevice= 0.01
- Nov 08 16:33:50 bullseye kernel: usb 2-7: New USB device strings: Mfr=3, Product=1, SerialNumber=2
- Nov 08 16:33:50 bullseye kernel: usb 2-7: Product: HP HD Webcam
- Nov 08 16:33:50 bullseye kernel: usb 2-7: Manufacturer: DEFSU019I8O083
- Nov 08 16:33:50 bullseye kernel: usb 2-7: SerialNumber: 200901010001
- Nov 08 16:33:50 bullseye kernel: usb 2-12: new full-speed USB device number 5 using xhci_hcd
- Nov 08 16:33:50 bullseye kernel: ata4: SATA link down (SStatus 0 SControl 300)
- Nov 08 16:33:50 bullseye kernel: usb 2-12: New USB device found, idVendor=8087, idProduct=07dc, bcdDevice= 0.01
- Nov 08 16:33:50 bullseye kernel: usb 2-12: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- Nov 08 16:33:50 bullseye kernel: sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
- Nov 08 16:33:50 bullseye kernel: sd 0:0:0:0: [sda] 4096-byte physical blocks
- Nov 08 16:33:50 bullseye kernel: sd 0:0:0:0: [sda] Write Protect is off
- Nov 08 16:33:50 bullseye kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- Nov 08 16:33:50 bullseye kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- Nov 08 16:33:50 bullseye kernel: sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
- Nov 08 16:33:50 bullseye kernel: cdrom: Uniform CD-ROM driver Revision: 3.20
- Nov 08 16:33:50 bullseye kernel: sr 1:0:0:0: Attached scsi CD-ROM sr0
- Nov 08 16:33:50 bullseye kernel: psmouse serio3: synaptics: queried max coordinates: x [..5660], y [..4730]
- Nov 08 16:33:50 bullseye kernel: psmouse serio3: synaptics: queried min coordinates: x [1324..], y [1248..]
- Nov 08 16:33:50 bullseye kernel: psmouse serio3: synaptics: Your touchpad (PNP: SYN3013 SYN0100 SYN0002 PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org.
- Nov 08 16:33:50 bullseye kernel: psmouse serio3: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd40123/0x840300/0x26800/0x0, board id: 2706, fw id: 1486004
- Nov 08 16:33:50 bullseye kernel: input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio3/input/input21
- Nov 08 16:33:50 bullseye kernel: sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 >
- Nov 08 16:33:50 bullseye kernel: sd 0:0:0:0: [sda] Attached SCSI disk
- Nov 08 16:33:50 bullseye kernel: PM: Image not found (code -22)
- Nov 08 16:33:50 bullseye kernel: EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
- Nov 08 16:33:50 bullseye kernel: Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
- Nov 08 16:33:50 bullseye systemd[1]: RTC configured in localtime, applying delta of 60 minutes to system time.
- Nov 08 16:33:50 bullseye systemd[1]: Inserted module 'autofs4'
- Nov 08 16:33:50 bullseye systemd[1]: systemd 246.6-2 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
- Nov 08 16:33:50 bullseye systemd[1]: Detected architecture x86-64.
- Nov 08 16:33:50 bullseye systemd[1]: Set hostname to <bullseye>.
- Nov 08 16:33:50 bullseye systemd[1]: /lib/systemd/system/plymouth-start.service:16: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
- Nov 08 16:33:50 bullseye systemd[1]: /etc/systemd/system/anydesk.service:9: PIDFile= references a path below legacy directory /var/run/, updating /var/run/anydesk.pid → /run/anydesk.pid; please update the unit file accordingly.
- Nov 08 16:33:50 bullseye systemd[1]: Queued start job for default target Rescue Mode.
- Nov 08 16:33:50 bullseye systemd[1]: Created slice system-systemd\x2dfsck.slice.
- Nov 08 16:33:50 bullseye systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
- Nov 08 16:33:50 bullseye systemd[1]: Listening on fsck to fsckd communication Socket.
- Nov 08 16:33:50 bullseye systemd[1]: Listening on Journal Audit Socket.
- Nov 08 16:33:50 bullseye systemd[1]: Listening on Journal Socket (/dev/log).
- Nov 08 16:33:50 bullseye systemd[1]: Listening on Journal Socket.
- Nov 08 16:33:50 bullseye systemd[1]: Listening on udev Control Socket.
- Nov 08 16:33:50 bullseye systemd[1]: Listening on udev Kernel Socket.
- Nov 08 16:33:50 bullseye systemd[1]: Mounting Huge Pages File System...
- Nov 08 16:33:50 bullseye systemd[1]: Mounting POSIX Message Queue File System...
- Nov 08 16:33:50 bullseye systemd[1]: Mounting Kernel Debug File System...
- Nov 08 16:33:50 bullseye systemd[1]: Mounting Kernel Trace File System...
- Nov 08 16:33:50 bullseye systemd[1]: Starting Set the console keyboard layout...
- Nov 08 16:33:50 bullseye systemd[1]: Starting Create list of static device nodes for the current kernel...
- Nov 08 16:33:50 bullseye systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
- Nov 08 16:33:50 bullseye systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
- Nov 08 16:33:50 bullseye systemd[1]: Starting Journal Service...
- Nov 08 16:33:50 bullseye systemd[1]: Starting Load Kernel Modules...
- Nov 08 16:33:50 bullseye systemd[1]: Starting Remount Root and Kernel File Systems...
- Nov 08 16:33:50 bullseye systemd[1]: Starting Coldplug All udev Devices...
- Nov 08 16:33:50 bullseye systemd[1]: Finished Create list of static device nodes for the current kernel.
- Nov 08 16:33:50 bullseye systemd[1]: Mounted Huge Pages File System.
- Nov 08 16:33:50 bullseye systemd[1]: Mounted POSIX Message Queue File System.
- Nov 08 16:33:50 bullseye systemd[1]: Mounted Kernel Debug File System.
- Nov 08 16:33:50 bullseye systemd[1]: Mounted Kernel Trace File System.
- Nov 08 16:33:50 bullseye kernel: EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro
- Nov 08 16:33:50 bullseye systemd[1]: Finished Remount Root and Kernel File Systems.
- Nov 08 16:33:50 bullseye systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
- Nov 08 16:33:50 bullseye systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
- Nov 08 16:33:50 bullseye systemd[1]: Starting Load/Save Random Seed...
- Nov 08 16:33:50 bullseye systemd[1]: Starting Create System Users...
- Nov 08 16:33:50 bullseye systemd-journald[266]: Journal started
- ░░ Subject: The journal has been started
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ The system journal process has started up, opened the journal
- ░░ files for writing and is now ready to process requests.
- Nov 08 16:33:50 bullseye systemd-journald[266]: Runtime Journal (/run/log/journal/a995b640411e4da5993679a1c5661b30) is 8.0M, max 199.3M, 191.3M free.
- ░░ Subject: Disk space used by the journal
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ Runtime Journal (/run/log/journal/a995b640411e4da5993679a1c5661b30) is currently using 8.0M.
- ░░ Maximum allowed usage is set to 199.3M.
- ░░ Leaving at least 99.6M free (of currently available 1.9G of disk space).
- ░░ Enforced usage limit is thus 199.3M, of which 191.3M are still available.
- ░░
- ░░ The limits controlling how much disk space is used by the journal may
- ░░ be configured with SystemMaxUse=, SystemKeepFree=, SystemMaxFileSize=,
- ░░ RuntimeMaxUse=, RuntimeKeepFree=, RuntimeMaxFileSize= settings in
- ░░ /etc/systemd/journald.conf. See journald.conf(5) for details.
- Nov 08 16:33:50 bullseye systemd[1]: Starting Flush Journal to Persistent Storage...
- ░░ Subject: A start job for unit systemd-journal-flush.service has begun execution
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit systemd-journal-flush.service has begun execution.
- ░░
- ░░ The job identifier is 18.
- Nov 08 16:33:50 bullseye systemd[1]: Started Journal Service.
- Nov 08 16:33:50 bullseye systemd[1]: Finished Coldplug All udev Devices.
- ░░ Subject: A start job for unit systemd-udev-trigger.service has finished successfully
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit systemd-udev-trigger.service has finished successfully.
- ░░
- ░░ The job identifier is 44.
- Nov 08 16:33:50 bullseye systemd-journald[266]: Time spent on flushing to /var/log/journal/a995b640411e4da5993679a1c5661b30 is 4.920453s for 855 entries.
- Nov 08 16:33:50 bullseye systemd-journald[266]: System Journal (/var/log/journal/a995b640411e4da5993679a1c5661b30) is 352.0M, max 3.6G, 3.2G free.
- ░░ Subject: Disk space used by the journal
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ System Journal (/var/log/journal/a995b640411e4da5993679a1c5661b30) is currently using 352.0M.
- ░░ Maximum allowed usage is set to 3.6G.
- ░░ Leaving at least 1.8G free (of currently available 6.5G of disk space).
- ░░ Enforced usage limit is thus 3.6G, of which 3.2G are still available.
- ░░
- ░░ The limits controlling how much disk space is used by the journal may
- ░░ be configured with SystemMaxUse=, SystemKeepFree=, SystemMaxFileSize=,
- ░░ RuntimeMaxUse=, RuntimeKeepFree=, RuntimeMaxFileSize= settings in
- ░░ /etc/systemd/journald.conf. See journald.conf(5) for details.
- Nov 08 16:33:59 bullseye kernel: lp: driver loaded but no devices found
- Nov 08 16:33:59 bullseye kernel: ppdev: user-space parallel port driver
- Nov 08 16:33:59 bullseye kernel: parport_pc 00:04: reported by Plug and Play ACPI
- Nov 08 16:33:59 bullseye kernel: parport0: PC-style at 0x378 (0x778), irq 5 [PCSPP,TRISTATE,EPP]
- Nov 08 16:33:59 bullseye kernel: lp0: using parport0 (interrupt-driven).
- Nov 08 16:33:59 bullseye kernel: input: PC Speaker as /devices/platform/pcspkr/input/input24
- Nov 08 16:33:59 bullseye kernel: input: HP Wireless hotkeys as /devices/virtual/input/input25
- Nov 08 16:33:59 bullseye kernel: ACPI: AC Adapter [AC] (on-line)
- Nov 08 16:33:59 bullseye kernel: EDAC ie31200: No ECC support
- Nov 08 16:33:59 bullseye kernel: EDAC ie31200: No ECC support
- Nov 08 16:33:59 bullseye kernel: hp_accel: hardware type HPZBook17 found
- Nov 08 16:33:59 bullseye kernel: lis3lv02d: 8 bits 3DC sensor found
- Nov 08 16:33:59 bullseye kernel: at24 0-0050: supply vcc not found, using dummy regulator
- Nov 08 16:33:59 bullseye kernel: at24 0-0050: 256 byte spd EEPROM, read-only
- Nov 08 16:33:59 bullseye kernel: at24 0-0052: supply vcc not found, using dummy regulator
- Nov 08 16:33:59 bullseye kernel: at24 0-0052: 256 byte spd EEPROM, read-only
- Nov 08 16:33:59 bullseye kernel: at24 0-0053: supply vcc not found, using dummy regulator
- Nov 08 16:33:59 bullseye kernel: at24 0-0053: 256 byte spd EEPROM, read-only
- Nov 08 16:33:59 bullseye kernel: RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 655360 ms ovfl timer
- Nov 08 16:33:59 bullseye kernel: RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
- Nov 08 16:33:59 bullseye kernel: RAPL PMU: hw unit of domain package 2^-14 Joules
- Nov 08 16:33:59 bullseye kernel: RAPL PMU: hw unit of domain dram 2^-14 Joules
- Nov 08 16:33:59 bullseye kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0
- Nov 08 16:33:59 bullseye kernel: sr 1:0:0:0: Attached scsi generic sg1 type 5
- Nov 08 16:33:59 bullseye kernel: tpm_tis 00:07: 1.2 TPM (device-id 0x1A, rev-id 16)
- Nov 08 16:33:59 bullseye kernel: input: HP WMI hotkeys as /devices/virtual/input/input26
- Nov 08 16:33:59 bullseye kernel: iTCO_vendor_support: vendor-support=0
- Nov 08 16:33:59 bullseye kernel: cfg80211: Loading compiled-in X.509 certificates for regulatory database
- Nov 08 16:33:59 bullseye kernel: cfg80211: Loaded X.509 cert 'benh@debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf'
- Nov 08 16:33:59 bullseye kernel: cfg80211: Loaded X.509 cert 'romain.perier@gmail.com: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328'
- Nov 08 16:33:59 bullseye kernel: cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
- Nov 08 16:33:59 bullseye kernel: Intel(R) Wireless WiFi driver for Linux
- Nov 08 16:33:59 bullseye kernel: iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
- Nov 08 16:33:59 bullseye kernel: iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860)
- Nov 08 16:33:59 bullseye kernel: iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
- Nov 08 16:33:59 bullseye kernel: platform regulatory.0: firmware: direct-loading firmware regulatory.db
- Nov 08 16:33:59 bullseye kernel: iwlwifi 0000:3d:00.0: firmware: direct-loading firmware iwlwifi-7260-17.ucode
- Nov 08 16:33:59 bullseye kernel: iwlwifi 0000:3d:00.0: loaded firmware version 17.3216344376.0 7260-17.ucode op_mode iwlmvm
- Nov 08 16:33:59 bullseye kernel: iwlwifi 0000:3d:00.0: firmware: failed to load iwl-debug-yoyo.bin (-2)
- Nov 08 16:33:59 bullseye kernel: firmware_class: See https://wiki.debian.org/Firmware for information about missing firmware
- Nov 08 16:33:59 bullseye kernel: platform regulatory.0: firmware: direct-loading firmware regulatory.db.p7s
- Nov 08 16:33:59 bullseye kernel: cryptd: max_cpu_qlen set to 1000
- Nov 08 16:33:59 bullseye kernel: input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input27
- Nov 08 16:33:59 bullseye kernel: iwlwifi 0000:3d:00.0: Detected Intel(R) Dual Band Wireless AC 7260, REV=0x144
- Nov 08 16:33:59 bullseye kernel: iwlwifi 0000:3d:00.0: base HW address: 10:4a:7d:05:2d:a0
- Nov 08 16:33:59 bullseye kernel: mc: Linux media interface: v0.10
- Nov 08 16:33:59 bullseye kernel: videodev: Linux video capture interface: v2.00
- Nov 08 16:33:59 bullseye kernel: ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
- Nov 08 16:33:59 bullseye kernel: snd_hda_intel 0000:01:00.1: Disabling MSI
- Nov 08 16:33:59 bullseye kernel: snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
- Nov 08 16:33:59 bullseye kernel: AVX2 version of gcm_enc/dec engaged.
- Nov 08 16:33:59 bullseye kernel: AES CTR mode by8 optimization enabled
- Nov 08 16:33:59 bullseye kernel: input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input28
- Nov 08 16:33:59 bullseye kernel: input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input29
- Nov 08 16:33:59 bullseye kernel: input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input30
- Nov 08 16:33:59 bullseye kernel: input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input31
- Nov 08 16:33:59 bullseye kernel: input: HDA NVidia HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input32
- Nov 08 16:33:59 bullseye kernel: input: HDA NVidia HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input33
- Nov 08 16:33:59 bullseye kernel: iwlwifi 0000:3d:00.0 wlp61s0: renamed from wlan0
- Nov 08 16:33:59 bullseye kernel: alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
- Nov 08 16:33:59 bullseye kernel: uvcvideo: Found UVC 1.00 device HP HD Webcam (04ca:704d)
- Nov 08 16:33:59 bullseye kernel: uvcvideo 2-7:1.0: Entity type for entity Extension 5 was not initialized!
- Nov 08 16:33:59 bullseye kernel: uvcvideo 2-7:1.0: Entity type for entity Extension 2 was not initialized!
- Nov 08 16:33:59 bullseye kernel: uvcvideo 2-7:1.0: Entity type for entity Processing 3 was not initialized!
- Nov 08 16:33:59 bullseye kernel: uvcvideo 2-7:1.0: Entity type for entity Camera 1 was not initialized!
- Nov 08 16:33:59 bullseye kernel: input: HP HD Webcam: HP HD Webcam as /devices/pci0000:00/0000:00:14.0/usb2/2-7/2-7:1.0/input/input34
- Nov 08 16:33:59 bullseye kernel: usbcore: registered new interface driver uvcvideo
- Nov 08 16:33:59 bullseye kernel: USB Video Class driver (1.1.1)
- Nov 08 16:33:59 bullseye kernel: snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3228: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
- Nov 08 16:33:59 bullseye kernel: snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
- Nov 08 16:33:59 bullseye kernel: snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
- Nov 08 16:33:59 bullseye kernel: snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
- Nov 08 16:33:59 bullseye kernel: snd_hda_codec_realtek hdaudioC0D0: inputs:
- Nov 08 16:33:59 bullseye kernel: snd_hda_codec_realtek hdaudioC0D0: Mic=0x1a
- Nov 08 16:33:59 bullseye kernel: snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
- Nov 08 16:33:59 bullseye kernel: input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input35
- Nov 08 16:33:59 bullseye kernel: input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input36
- Nov 08 16:33:59 bullseye kernel: input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input37
- Nov 08 16:33:59 bullseye kernel: Bluetooth: Core ver 2.22
- Nov 08 16:33:59 bullseye kernel: NET: Registered protocol family 31
- Nov 08 16:33:59 bullseye kernel: Bluetooth: HCI device and connection manager initialized
- Nov 08 16:33:59 bullseye kernel: Bluetooth: HCI socket layer initialized
- Nov 08 16:33:59 bullseye kernel: Bluetooth: L2CAP socket layer initialized
- Nov 08 16:33:59 bullseye kernel: Bluetooth: SCO socket layer initialized
- Nov 08 16:33:59 bullseye kernel: intel_rapl_common: Found RAPL domain package
- Nov 08 16:33:59 bullseye kernel: intel_rapl_common: Found RAPL domain core
- Nov 08 16:33:59 bullseye kernel: intel_rapl_common: Found RAPL domain dram
- Nov 08 16:33:59 bullseye kernel: usbcore: registered new interface driver btusb
- Nov 08 16:33:59 bullseye kernel: Bluetooth: hci0: read Intel version: 370710018002030d00
- Nov 08 16:33:59 bullseye kernel: bluetooth hci0: firmware: direct-loading firmware intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
- Nov 08 16:33:59 bullseye kernel: Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
- Nov 08 16:33:59 bullseye kernel: Bluetooth: hci0: unexpected event for opcode 0xfc2f
- Nov 08 16:33:59 bullseye kernel: Bluetooth: hci0: Intel BT fw patch 0x57 completed & activated
- Nov 08 16:33:55 bullseye mtp-probe[339]: checking bus 2, device 2: "/sys/devices/pci0000:00/0000:00:14.0/usb2/2-2"
- Nov 08 16:33:50 bullseye systemd-modules-load[267]: Inserted module 'lp'
- Nov 08 16:33:59 bullseye systemd-modules-load[287]: modprobe: FATAL: Module nvidia-legacy-390xx not found in directory /lib/modules/5.9.0-1-amd64
- Nov 08 16:33:55 bullseye mtp-probe[338]: checking bus 2, device 4: "/sys/devices/pci0000:00/0000:00:14.0/usb2/2-7"
- Nov 08 16:33:50 bullseye systemd-modules-load[267]: Inserted module 'ppdev'
- Nov 08 16:33:59 bullseye systemd-modules-load[285]: modprobe: ERROR: ../libkmod/libkmod-module.c:990 command_do() Error running install command 'modprobe -i nvidia-legacy-390xx ' for module nvidia: retcode 1
- Nov 08 16:33:59 bullseye systemd-modules-load[285]: modprobe: ERROR: could not insert 'nvidia': Invalid argument
- Nov 08 16:33:55 bullseye mtp-probe[336]: checking bus 2, device 3: "/sys/devices/pci0000:00/0000:00:14.0/usb2/2-5"
- Nov 08 16:33:50 bullseye systemd[1]: Finished Create System Users.
- ░░ Subject: A start job for unit systemd-sysusers.service has finished successfully
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit systemd-sysusers.service has finished successfully.
- ░░
- ░░ The job identifier is 36.
- Nov 08 16:33:59 bullseye systemd-modules-load[293]: modprobe: FATAL: Module nvidia-legacy-390xx-modeset not found in directory /lib/modules/5.9.0-1-amd64
- Nov 08 16:33:55 bullseye mtp-probe[336]: bus: 2, device: 3 was not an MTP device
- Nov 08 16:33:50 bullseye systemd[1]: Starting Create Static Device Nodes in /dev...
- ░░ Subject: A start job for unit systemd-tmpfiles-setup-dev.service has begun execution
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit systemd-tmpfiles-setup-dev.service has begun execution.
- ░░
- ░░ The job identifier is 35.
- Nov 08 16:33:59 bullseye systemd-modules-load[283]: modprobe: ERROR: ../libkmod/libkmod-module.c:990 command_do() Error running install command 'modprobe nvidia ; modprobe -i nvidia-legacy-390xx-modeset ' for module nvidia_modeset: retcode 1
- Nov 08 16:33:59 bullseye systemd-modules-load[283]: modprobe: ERROR: could not insert 'nvidia_modeset': Invalid argument
- Nov 08 16:33:55 bullseye mtp-probe[339]: bus: 2, device: 2 was not an MTP device
- Nov 08 16:33:59 bullseye systemd-udevd[335]: modprobe: FATAL: Module nvidia-legacy-390xx not found in directory /lib/modules/5.9.0-1-amd64
- Nov 08 16:33:50 bullseye systemd-modules-load[267]: Inserted module 'parport_pc'
- Nov 08 16:33:59 bullseye systemd-modules-load[294]: modprobe: FATAL: Module nvidia-legacy-390xx-drm not found in directory /lib/modules/5.9.0-1-amd64
- Nov 08 16:33:55 bullseye mtp-probe[338]: bus: 2, device: 4 was not an MTP device
- Nov 08 16:33:51 bullseye systemd-modules-load[267]: Error running install command 'modprobe nvidia-modeset ; modprobe -i nvidia-legacy-390xx-drm ' for module nvidia_drm: retcode 1
- Nov 08 16:33:51 bullseye systemd-modules-load[267]: Failed to insert module 'nvidia_drm': Invalid argument
- Nov 08 16:33:51 bullseye systemd[1]: systemd-modules-load.service: Main process exited, code=exited, status=1/FAILURE
- ░░ Subject: Unit process exited
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ An ExecStart= process belonging to unit systemd-modules-load.service has exited.
- ░░
- ░░ The process' exit code is 'exited' and its exit status is 1.
- Nov 08 16:33:59 bullseye systemd-modules-load[387]: modprobe: FATAL: Module nvidia-legacy-390xx not found in directory /lib/modules/5.9.0-1-amd64
- Nov 08 16:33:51 bullseye systemd[1]: systemd-modules-load.service: Failed with result 'exit-code'.
- ░░ Subject: Unit failed
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ The unit systemd-modules-load.service has entered the 'failed' state with result 'exit-code'.
- Nov 08 16:33:59 bullseye systemd-modules-load[385]: modprobe: ERROR: ../libkmod/libkmod-module.c:990 command_do() Error running install command 'modprobe -i nvidia-legacy-390xx ' for module nvidia: retcode 1
- Nov 08 16:33:59 bullseye systemd-modules-load[385]: modprobe: ERROR: could not insert 'nvidia': Invalid argument
- Nov 08 16:33:51 bullseye systemd[1]: Failed to start Load Kernel Modules.
- ░░ Subject: A start job for unit systemd-modules-load.service has failed
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit systemd-modules-load.service has finished with a failure.
- ░░
- ░░ The job identifier is 33 and the job result is failed.
- Nov 08 16:33:59 bullseye systemd-modules-load[388]: modprobe: FATAL: Module nvidia-legacy-390xx-modeset not found in directory /lib/modules/5.9.0-1-amd64
- Nov 08 16:33:59 bullseye systemd-modules-load[416]: modprobe: FATAL: Module nvidia-legacy-390xx not found in directory /lib/modules/5.9.0-1-amd64
- Nov 08 16:33:51 bullseye systemd[1]: Condition check resulted in FUSE Control File System being skipped.
- ░░ Subject: A start job for unit sys-fs-fuse-connections.mount has finished successfully
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit sys-fs-fuse-connections.mount has finished successfully.
- ░░
- ░░ The job identifier is 43.
- Nov 08 16:33:59 bullseye systemd-modules-load[383]: modprobe: ERROR: ../libkmod/libkmod-module.c:990 command_do() Error running install command 'modprobe nvidia ; modprobe -i nvidia-legacy-390xx-modeset ' for module nvidia_modeset: retcode 1
- Nov 08 16:33:59 bullseye systemd-modules-load[383]: modprobe: ERROR: could not insert 'nvidia_modeset': Invalid argument
- Nov 08 16:33:59 bullseye systemd-modules-load[414]: modprobe: ERROR: ../libkmod/libkmod-module.c:990 command_do() Error running install command 'modprobe -i nvidia-legacy-390xx ' for module nvidia: retcode 1
- Nov 08 16:33:59 bullseye systemd-modules-load[414]: modprobe: ERROR: could not insert 'nvidia': Invalid argument
- Nov 08 16:33:59 bullseye systemd-modules-load[428]: modprobe: FATAL: Module nvidia-legacy-390xx not found in directory /lib/modules/5.9.0-1-amd64
- Nov 08 16:33:51 bullseye systemd[1]: Condition check resulted in Kernel Configuration File System being skipped.
- ░░ Subject: A start job for unit sys-kernel-config.mount has finished successfully
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit sys-kernel-config.mount has finished successfully.
- ░░
- ░░ The job identifier is 23.
- Nov 08 16:33:59 bullseye systemd-modules-load[389]: modprobe: FATAL: Module nvidia-legacy-390xx-drm not found in directory /lib/modules/5.9.0-1-amd64
- Nov 08 16:33:59 bullseye systemd-modules-load[417]: modprobe: FATAL: Module nvidia-legacy-390xx-modeset not found in directory /lib/modules/5.9.0-1-amd64
- Nov 08 16:33:59 bullseye systemd-modules-load[492]: modprobe: FATAL: Module nvidia-legacy-390xx not found in directory /lib/modules/5.9.0-1-amd64
- Nov 08 16:33:59 bullseye systemd-modules-load[426]: modprobe: ERROR: ../libkmod/libkmod-module.c:990 command_do() Error running install command 'modprobe -i nvidia-legacy-390xx ' for module nvidia: retcode 1
- Nov 08 16:33:59 bullseye systemd-modules-load[426]: modprobe: ERROR: could not insert 'nvidia': Invalid argument
- Nov 08 16:33:51 bullseye systemd[1]: Starting Apply Kernel Variables...
- ░░ Subject: A start job for unit systemd-sysctl.service has begun execution
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit systemd-sysctl.service has begun execution.
- ░░
- ░░ The job identifier is 56.
- Nov 08 16:34:00 bullseye systemd-modules-load[412]: modprobe: ERROR: ../libkmod/libkmod-module.c:990 command_do() Error running install command 'modprobe nvidia ; modprobe -i nvidia-legacy-390xx-modeset ' for module nvidia_modeset: retcode 1
- Nov 08 16:34:00 bullseye systemd-modules-load[412]: modprobe: ERROR: could not insert 'nvidia_modeset': Invalid argument
- Nov 08 16:34:00 bullseye systemd-modules-load[490]: modprobe: ERROR: ../libkmod/libkmod-module.c:990 command_do() Error running install command 'modprobe -i nvidia-legacy-390xx ' for module nvidia: retcode 1
- Nov 08 16:34:00 bullseye systemd-modules-load[490]: modprobe: ERROR: could not insert 'nvidia': Invalid argument
- Nov 08 16:34:00 bullseye systemd-modules-load[429]: modprobe: FATAL: Module nvidia-legacy-390xx-modeset not found in directory /lib/modules/5.9.0-1-amd64
- Nov 08 16:33:51 bullseye systemd[1]: Finished Load/Save Random Seed.
- ░░ Subject: A start job for unit systemd-random-seed.service has finished successfully
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit systemd-random-seed.service has finished successfully.
- ░░
- ░░ The job identifier is 38.
- Nov 08 16:34:00 bullseye systemd-modules-load[418]: modprobe: FATAL: Module nvidia-legacy-390xx-drm not found in directory /lib/modules/5.9.0-1-amd64
- Nov 08 16:34:00 bullseye systemd-modules-load[493]: modprobe: FATAL: Module nvidia-legacy-390xx-modeset not found in directory /lib/modules/5.9.0-1-amd64
- Nov 08 16:34:00 bullseye systemd-modules-load[423]: modprobe: ERROR: ../libkmod/libkmod-module.c:990 command_do() Error running install command 'modprobe nvidia ; modprobe -i nvidia-legacy-390xx-modeset ' for module nvidia_modeset: retcode 1
- Nov 08 16:34:00 bullseye systemd-modules-load[423]: modprobe: ERROR: could not insert 'nvidia_modeset': Invalid argument
- Nov 08 16:33:51 bullseye systemd[1]: Finished Apply Kernel Variables.
- ░░ Subject: A start job for unit systemd-sysctl.service has finished successfully
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit systemd-sysctl.service has finished successfully.
- ░░
- ░░ The job identifier is 56.
- Nov 08 16:34:00 bullseye systemd-modules-load[488]: modprobe: ERROR: ../libkmod/libkmod-module.c:990 command_do() Error running install command 'modprobe nvidia ; modprobe -i nvidia-legacy-390xx-modeset ' for module nvidia_modeset: retcode 1
- Nov 08 16:34:00 bullseye systemd-modules-load[488]: modprobe: ERROR: could not insert 'nvidia_modeset': Invalid argument
- Nov 08 16:34:00 bullseye systemd-modules-load[430]: modprobe: FATAL: Module nvidia-legacy-390xx-drm not found in directory /lib/modules/5.9.0-1-amd64
- Nov 08 16:33:51 bullseye systemd[1]: Finished Set the console keyboard layout.
- ░░ Subject: A start job for unit keyboard-setup.service has finished successfully
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit keyboard-setup.service has finished successfully.
- ░░
- ░░ The job identifier is 12.
- Nov 08 16:34:00 bullseye systemd-modules-load[494]: modprobe: FATAL: Module nvidia-legacy-390xx-drm not found in directory /lib/modules/5.9.0-1-amd64
- Nov 08 16:33:51 bullseye systemd[1]: Finished Create Static Device Nodes in /dev.
- ░░ Subject: A start job for unit systemd-tmpfiles-setup-dev.service has finished successfully
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit systemd-tmpfiles-setup-dev.service has finished successfully.
- ░░
- ░░ The job identifier is 35.
- Nov 08 16:33:51 bullseye systemd[1]: Reached target Local File Systems (Pre).
- ░░ Subject: A start job for unit local-fs-pre.target has finished successfully
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit local-fs-pre.target has finished successfully.
- ░░
- ░░ The job identifier is 13.
- Nov 08 16:33:51 bullseye systemd[1]: Starting Rule-based Manager for Device Events and Files...
- ░░ Subject: A start job for unit systemd-udevd.service has begun execution
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit systemd-udevd.service has begun execution.
- ░░
- ░░ The job identifier is 40.
- Nov 08 16:33:53 bullseye systemd[1]: Started Rule-based Manager for Device Events and Files.
- ░░ Subject: A start job for unit systemd-udevd.service has finished successfully
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit systemd-udevd.service has finished successfully.
- ░░
- ░░ The job identifier is 40.
- Nov 08 16:33:53 bullseye systemd[1]: Starting Show Plymouth Boot Screen...
- ░░ Subject: A start job for unit plymouth-start.service has begun execution
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit plymouth-start.service has begun execution.
- ░░
- ░░ The job identifier is 16.
- Nov 08 16:33:53 bullseye systemd-udevd[312]: Using default interface naming scheme 'v245'.
- Nov 08 16:33:53 bullseye systemd-udevd[326]: Error running install command 'modprobe -i nvidia-legacy-390xx ' for module nvidia: retcode 1
- Nov 08 16:33:53 bullseye systemd-udevd[312]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
- Nov 08 16:33:54 bullseye systemd[1]: Created slice system-systemd\x2dbacklight.slice.
- ░░ Subject: A start job for unit system-systemd\x2dbacklight.slice has finished successfully
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit system-systemd\x2dbacklight.slice has finished successfully.
- ░░
- ░░ The job identifier is 72.
- Nov 08 16:33:54 bullseye systemd[1]: Starting Load/Save Screen Backlight Brightness of backlight:acpi_video0...
- ░░ Subject: A start job for unit systemd-backlight@backlight:acpi_video0.service has begun execution
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit systemd-backlight@backlight:acpi_video0.service has begun execution.
- ░░
- ░░ The job identifier is 68.
- Nov 08 16:33:54 bullseye systemd[1]: Started Show Plymouth Boot Screen.
- ░░ Subject: A start job for unit plymouth-start.service has finished successfully
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit plymouth-start.service has finished successfully.
- ░░
- ░░ The job identifier is 16.
- Nov 08 16:33:54 bullseye systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch being skipped.
- ░░ Subject: A start job for unit systemd-ask-password-console.path has finished successfully
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit systemd-ask-password-console.path has finished successfully.
- ░░
- ░░ The job identifier is 57.
- Nov 08 16:33:54 bullseye systemd[1]: Started Forward Password Requests to Plymouth Directory Watch.
- ░░ Subject: A start job for unit systemd-ask-password-plymouth.path has finished successfully
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit systemd-ask-password-plymouth.path has finished successfully.
- ░░
- ░░ The job identifier is 17.
- Nov 08 16:33:54 bullseye systemd[1]: Reached target Local Encrypted Volumes.
- ░░ Subject: A start job for unit cryptsetup.target has finished successfully
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit cryptsetup.target has finished successfully.
- ░░
- ░░ The job identifier is 60.
- Nov 08 16:33:54 bullseye systemd[1]: Finished Load/Save Screen Backlight Brightness of backlight:acpi_video0.
- ░░ Subject: A start job for unit systemd-backlight@backlight:acpi_video0.service has finished successfully
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit systemd-backlight@backlight:acpi_video0.service has finished successfully.
- ░░
- ░░ The job identifier is 68.
- Nov 08 16:33:54 bullseye systemd-udevd[310]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
- Nov 08 16:33:55 bullseye systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch being skipped.
- ░░ Subject: A start job for unit systemd-ask-password-console.path has finished successfully
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit systemd-ask-password-console.path has finished successfully.
- ░░
- ░░ The job identifier is 132.
- Nov 08 16:33:55 bullseye systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
- ░░ Subject: A start job for unit systemd-binfmt.service has finished successfully
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit systemd-binfmt.service has finished successfully.
- ░░
- ░░ The job identifier is 125.
- Nov 08 16:33:55 bullseye systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
- ░░ Subject: A start job for unit systemd-fsck-root.service has finished successfully
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit systemd-fsck-root.service has finished successfully.
- ░░
- ░░ The job identifier is 106.
- Nov 08 16:33:55 bullseye systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
- ░░ Subject: A start job for unit systemd-hwdb-update.service has finished successfully
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit systemd-hwdb-update.service has finished successfully.
- ░░
- ░░ The job identifier is 82.
- Nov 08 16:33:55 bullseye systemd[1]: Starting Load Kernel Modules...
- ░░ Subject: A start job for unit systemd-modules-load.service has begun execution
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit systemd-modules-load.service has begun execution.
- ░░
- ░░ The job identifier is 108.
- Nov 08 16:33:55 bullseye systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
- ░░ Subject: A start job for unit systemd-pstore.service has finished successfully
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit systemd-pstore.service has finished successfully.
- ░░
- ░░ The job identifier is 109.
- Nov 08 16:33:55 bullseye systemd-modules-load[381]: Error running install command 'modprobe nvidia-modeset ; modprobe -i nvidia-legacy-390xx-drm ' for module nvidia_drm: retcode 1
- Nov 08 16:33:55 bullseye systemd-modules-load[381]: Failed to insert module 'nvidia_drm': Invalid argument
- Nov 08 16:33:55 bullseye systemd[1]: systemd-modules-load.service: Main process exited, code=exited, status=1/FAILURE
- ░░ Subject: Unit process exited
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ An ExecStart= process belonging to unit systemd-modules-load.service has exited.
- ░░
- ░░ The process' exit code is 'exited' and its exit status is 1.
- Nov 08 16:33:55 bullseye systemd[1]: systemd-modules-load.service: Failed with result 'exit-code'.
- ░░ Subject: Unit failed
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ The unit systemd-modules-load.service has entered the 'failed' state with result 'exit-code'.
- Nov 08 16:33:55 bullseye systemd[1]: Failed to start Load Kernel Modules.
- ░░ Subject: A start job for unit systemd-modules-load.service has failed
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit systemd-modules-load.service has finished with a failure.
- ░░
- ░░ The job identifier is 108 and the job result is failed.
- Nov 08 16:33:55 bullseye systemd[1]: Condition check resulted in FUSE Control File System being skipped.
- ░░ Subject: A start job for unit sys-fs-fuse-connections.mount has finished successfully
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit sys-fs-fuse-connections.mount has finished successfully.
- ░░
- ░░ The job identifier is 118.
- Nov 08 16:33:55 bullseye systemd[1]: Condition check resulted in Kernel Configuration File System being skipped.
- ░░ Subject: A start job for unit sys-kernel-config.mount has finished successfully
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit sys-kernel-config.mount has finished successfully.
- ░░
- ░░ The job identifier is 98.
- Nov 08 16:33:55 bullseye systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
- ░░ Subject: A start job for unit systemd-rfkill.socket has finished successfully
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit systemd-rfkill.socket has finished successfully.
- ░░
- ░░ The job identifier is 136.
- Nov 08 16:33:56 bullseye systemd[1]: Starting Load/Save RF Kill Switch Status...
- ░░ Subject: A start job for unit systemd-rfkill.service has begun execution
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit systemd-rfkill.service has begun execution.
- ░░
- ░░ The job identifier is 143.
- Nov 08 16:33:56 bullseye systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch being skipped.
- ░░ Subject: A start job for unit systemd-ask-password-console.path has finished successfully
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit systemd-ask-password-console.path has finished successfully.
- ░░
- ░░ The job identifier is 209.
- Nov 08 16:33:56 bullseye systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
- ░░ Subject: A start job for unit systemd-binfmt.service has finished successfully
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit systemd-binfmt.service has finished successfully.
- ░░
- ░░ The job identifier is 202.
- Nov 08 16:33:56 bullseye systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
- ░░ Subject: A start job for unit systemd-fsck-root.service has finished successfully
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit systemd-fsck-root.service has finished successfully.
- ░░
- ░░ The job identifier is 183.
- Nov 08 16:33:56 bullseye systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
- ░░ Subject: A start job for unit systemd-hwdb-update.service has finished successfully
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit systemd-hwdb-update.service has finished successfully.
- ░░
- ░░ The job identifier is 159.
- Nov 08 16:33:56 bullseye systemd[1]: Starting Load Kernel Modules...
- ░░ Subject: A start job for unit systemd-modules-load.service has begun execution
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit systemd-modules-load.service has begun execution.
- ░░
- ░░ The job identifier is 185.
- Nov 08 16:33:56 bullseye systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
- ░░ Subject: A start job for unit systemd-pstore.service has finished successfully
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit systemd-pstore.service has finished successfully.
- ░░
- ░░ The job identifier is 186.
- Nov 08 16:33:56 bullseye systemd-modules-load[410]: Error running install command 'modprobe nvidia-modeset ; modprobe -i nvidia-legacy-390xx-drm ' for module nvidia_drm: retcode 1
- Nov 08 16:33:56 bullseye systemd-modules-load[410]: Failed to insert module 'nvidia_drm': Invalid argument
- Nov 08 16:33:56 bullseye systemd[1]: systemd-modules-load.service: Main process exited, code=exited, status=1/FAILURE
- ░░ Subject: Unit process exited
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ An ExecStart= process belonging to unit systemd-modules-load.service has exited.
- ░░
- ░░ The process' exit code is 'exited' and its exit status is 1.
- Nov 08 16:33:56 bullseye systemd[1]: systemd-modules-load.service: Failed with result 'exit-code'.
- ░░ Subject: Unit failed
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ The unit systemd-modules-load.service has entered the 'failed' state with result 'exit-code'.
- Nov 08 16:33:56 bullseye systemd[1]: Failed to start Load Kernel Modules.
- ░░ Subject: A start job for unit systemd-modules-load.service has failed
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit systemd-modules-load.service has finished with a failure.
- ░░
- ░░ The job identifier is 185 and the job result is failed.
- Nov 08 16:33:56 bullseye systemd[1]: Condition check resulted in FUSE Control File System being skipped.
- ░░ Subject: A start job for unit sys-fs-fuse-connections.mount has finished successfully
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit sys-fs-fuse-connections.mount has finished successfully.
- ░░
- ░░ The job identifier is 195.
- Nov 08 16:33:56 bullseye systemd[1]: Condition check resulted in Kernel Configuration File System being skipped.
- ░░ Subject: A start job for unit sys-kernel-config.mount has finished successfully
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit sys-kernel-config.mount has finished successfully.
- ░░
- ░░ The job identifier is 175.
- Nov 08 16:33:56 bullseye systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch being skipped.
- ░░ Subject: A start job for unit systemd-ask-password-console.path has finished successfully
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit systemd-ask-password-console.path has finished successfully.
- ░░
- ░░ The job identifier is 270.
- Nov 08 16:33:56 bullseye systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
- ░░ Subject: A start job for unit systemd-binfmt.service has finished successfully
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit systemd-binfmt.service has finished successfully.
- ░░
- ░░ The job identifier is 263.
- Nov 08 16:33:56 bullseye systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
- ░░ Subject: A start job for unit systemd-fsck-root.service has finished successfully
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit systemd-fsck-root.service has finished successfully.
- ░░
- ░░ The job identifier is 244.
- Nov 08 16:33:56 bullseye systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
- ░░ Subject: A start job for unit systemd-hwdb-update.service has finished successfully
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit systemd-hwdb-update.service has finished successfully.
- ░░
- ░░ The job identifier is 220.
- Nov 08 16:33:56 bullseye systemd[1]: Starting Load Kernel Modules...
- ░░ Subject: A start job for unit systemd-modules-load.service has begun execution
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit systemd-modules-load.service has begun execution.
- ░░
- ░░ The job identifier is 246.
- Nov 08 16:33:56 bullseye systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
- ░░ Subject: A start job for unit systemd-pstore.service has finished successfully
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit systemd-pstore.service has finished successfully.
- ░░
- ░░ The job identifier is 247.
- Nov 08 16:33:56 bullseye systemd-modules-load[421]: Error running install command 'modprobe nvidia-modeset ; modprobe -i nvidia-legacy-390xx-drm ' for module nvidia_drm: retcode 1
- Nov 08 16:33:56 bullseye systemd-modules-load[421]: Failed to insert module 'nvidia_drm': Invalid argument
- Nov 08 16:33:56 bullseye systemd[1]: systemd-modules-load.service: Main process exited, code=exited, status=1/FAILURE
- ░░ Subject: Unit process exited
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ An ExecStart= process belonging to unit systemd-modules-load.service has exited.
- ░░
- ░░ The process' exit code is 'exited' and its exit status is 1.
- Nov 08 16:33:56 bullseye systemd[1]: systemd-modules-load.service: Failed with result 'exit-code'.
- ░░ Subject: Unit failed
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ The unit systemd-modules-load.service has entered the 'failed' state with result 'exit-code'.
- Nov 08 16:33:56 bullseye systemd[1]: Failed to start Load Kernel Modules.
- ░░ Subject: A start job for unit systemd-modules-load.service has failed
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit systemd-modules-load.service has finished with a failure.
- ░░
- ░░ The job identifier is 246 and the job result is failed.
- Nov 08 16:33:56 bullseye systemd[1]: Condition check resulted in FUSE Control File System being skipped.
- ░░ Subject: A start job for unit sys-fs-fuse-connections.mount has finished successfully
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit sys-fs-fuse-connections.mount has finished successfully.
- ░░
- ░░ The job identifier is 256.
- Nov 08 16:33:56 bullseye systemd[1]: Condition check resulted in Kernel Configuration File System being skipped.
- ░░ Subject: A start job for unit sys-kernel-config.mount has finished successfully
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit sys-kernel-config.mount has finished successfully.
- ░░
- ░░ The job identifier is 236.
- Nov 08 16:33:56 bullseye systemd-udevd[313]: Using default interface naming scheme 'v245'.
- Nov 08 16:33:56 bullseye systemd-udevd[313]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
- Nov 08 16:33:56 bullseye systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch being skipped.
- ░░ Subject: A start job for unit systemd-ask-password-console.path has finished successfully
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit systemd-ask-password-console.path has finished successfully.
- ░░
- ░░ The job identifier is 331.
- Nov 08 16:33:56 bullseye systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
- ░░ Subject: A start job for unit systemd-binfmt.service has finished successfully
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit systemd-binfmt.service has finished successfully.
- ░░
- ░░ The job identifier is 324.
- Nov 08 16:33:56 bullseye systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
- ░░ Subject: A start job for unit systemd-fsck-root.service has finished successfully
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit systemd-fsck-root.service has finished successfully.
- ░░
- ░░ The job identifier is 305.
- Nov 08 16:33:56 bullseye systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
- ░░ Subject: A start job for unit systemd-hwdb-update.service has finished successfully
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit systemd-hwdb-update.service has finished successfully.
- ░░
- ░░ The job identifier is 281.
- Nov 08 16:33:56 bullseye systemd[1]: Starting Load Kernel Modules...
- ░░ Subject: A start job for unit systemd-modules-load.service has begun execution
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit systemd-modules-load.service has begun execution.
- ░░
- ░░ The job identifier is 307.
- Nov 08 16:33:56 bullseye systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
- ░░ Subject: A start job for unit systemd-pstore.service has finished successfully
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit systemd-pstore.service has finished successfully.
- ░░
- ░░ The job identifier is 308.
- Nov 08 16:33:56 bullseye systemd-modules-load[486]: Error running install command 'modprobe nvidia-modeset ; modprobe -i nvidia-legacy-390xx-drm ' for module nvidia_drm: retcode 1
- Nov 08 16:33:56 bullseye systemd-modules-load[486]: Failed to insert module 'nvidia_drm': Invalid argument
- Nov 08 16:33:56 bullseye systemd[1]: systemd-modules-load.service: Main process exited, code=exited, status=1/FAILURE
- ░░ Subject: Unit process exited
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ An ExecStart= process belonging to unit systemd-modules-load.service has exited.
- ░░
- ░░ The process' exit code is 'exited' and its exit status is 1.
- Nov 08 16:33:56 bullseye systemd[1]: systemd-modules-load.service: Failed with result 'exit-code'.
- ░░ Subject: Unit failed
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ The unit systemd-modules-load.service has entered the 'failed' state with result 'exit-code'.
- Nov 08 16:33:56 bullseye systemd[1]: Failed to start Load Kernel Modules.
- ░░ Subject: A start job for unit systemd-modules-load.service has failed
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit systemd-modules-load.service has finished with a failure.
- ░░
- ░░ The job identifier is 307 and the job result is failed.
- Nov 08 16:33:56 bullseye systemd[1]: Condition check resulted in FUSE Control File System being skipped.
- ░░ Subject: A start job for unit sys-fs-fuse-connections.mount has finished successfully
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit sys-fs-fuse-connections.mount has finished successfully.
- ░░
- ░░ The job identifier is 317.
- Nov 08 16:33:56 bullseye systemd[1]: Condition check resulted in Kernel Configuration File System being skipped.
- ░░ Subject: A start job for unit sys-kernel-config.mount has finished successfully
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit sys-kernel-config.mount has finished successfully.
- ░░
- ░░ The job identifier is 297.
- Nov 08 16:33:57 bullseye systemd[1]: Started Load/Save RF Kill Switch Status.
- ░░ Subject: A start job for unit systemd-rfkill.service has finished successfully
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit systemd-rfkill.service has finished successfully.
- ░░
- ░░ The job identifier is 143.
- Nov 08 16:33:57 bullseye systemd-udevd[321]: Using default interface naming scheme 'v245'.
- Nov 08 16:33:57 bullseye systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch being skipped.
- ░░ Subject: A start job for unit systemd-ask-password-console.path has finished successfully
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit systemd-ask-password-console.path has finished successfully.
- ░░
- ░░ The job identifier is 393.
- Nov 08 16:33:57 bullseye systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
- ░░ Subject: A start job for unit systemd-binfmt.service has finished successfully
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit systemd-binfmt.service has finished successfully.
- ░░
- ░░ The job identifier is 386.
- Nov 08 16:33:57 bullseye systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
- ░░ Subject: A start job for unit systemd-fsck-root.service has finished successfully
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit systemd-fsck-root.service has finished successfully.
- ░░
- ░░ The job identifier is 367.
- Nov 08 16:33:57 bullseye systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
- ░░ Subject: A start job for unit systemd-hwdb-update.service has finished successfully
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit systemd-hwdb-update.service has finished successfully.
- ░░
- ░░ The job identifier is 343.
- Nov 08 16:33:57 bullseye systemd[1]: systemd-modules-load.service: Start request repeated too quickly.
- Nov 08 16:33:57 bullseye systemd[1]: systemd-modules-load.service: Failed with result 'exit-code'.
- ░░ Subject: Unit failed
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ The unit systemd-modules-load.service has entered the 'failed' state with result 'exit-code'.
- Nov 08 16:33:57 bullseye systemd[1]: Failed to start Load Kernel Modules.
- ░░ Subject: A start job for unit systemd-modules-load.service has failed
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit systemd-modules-load.service has finished with a failure.
- ░░
- ░░ The job identifier is 369 and the job result is failed.
- Nov 08 16:33:57 bullseye systemd[1]: Condition check resulted in FUSE Control File System being skipped.
- ░░ Subject: A start job for unit sys-fs-fuse-connections.mount has finished successfully
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit sys-fs-fuse-connections.mount has finished successfully.
- ░░
- ░░ The job identifier is 379.
- Nov 08 16:33:57 bullseye systemd[1]: Condition check resulted in Kernel Configuration File System being skipped.
- ░░ Subject: A start job for unit sys-kernel-config.mount has finished successfully
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit sys-kernel-config.mount has finished successfully.
- ░░
- ░░ The job identifier is 359.
- Nov 08 16:33:57 bullseye systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
- ░░ Subject: A start job for unit systemd-pstore.service has finished successfully
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit systemd-pstore.service has finished successfully.
- ░░
- ░░ The job identifier is 370.
- Nov 08 16:33:58 bullseye systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch being skipped.
- ░░ Subject: A start job for unit systemd-ask-password-console.path has finished successfully
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit systemd-ask-password-console.path has finished successfully.
- ░░
- ░░ The job identifier is 516.
- Nov 08 16:33:58 bullseye systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
- ░░ Subject: A start job for unit systemd-binfmt.service has finished successfully
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit systemd-binfmt.service has finished successfully.
- ░░
- ░░ The job identifier is 509.
- Nov 08 16:33:58 bullseye systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
- ░░ Subject: A start job for unit systemd-fsck-root.service has finished successfully
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit systemd-fsck-root.service has finished successfully.
- ░░
- ░░ The job identifier is 490.
- Nov 08 16:33:58 bullseye systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
- ░░ Subject: A start job for unit systemd-hwdb-update.service has finished successfully
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit systemd-hwdb-update.service has finished successfully.
- ░░
- ░░ The job identifier is 466.
- Nov 08 16:33:58 bullseye systemd[1]: systemd-modules-load.service: Start request repeated too quickly.
- Nov 08 16:33:58 bullseye systemd[1]: systemd-modules-load.service: Failed with result 'exit-code'.
- ░░ Subject: Unit failed
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ The unit systemd-modules-load.service has entered the 'failed' state with result 'exit-code'.
- Nov 08 16:33:58 bullseye systemd[1]: Failed to start Load Kernel Modules.
- ░░ Subject: A start job for unit systemd-modules-load.service has failed
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit systemd-modules-load.service has finished with a failure.
- ░░
- ░░ The job identifier is 492 and the job result is failed.
- Nov 08 16:33:58 bullseye systemd[1]: Condition check resulted in FUSE Control File System being skipped.
- ░░ Subject: A start job for unit sys-fs-fuse-connections.mount has finished successfully
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit sys-fs-fuse-connections.mount has finished successfully.
- ░░
- ░░ The job identifier is 502.
- Nov 08 16:33:58 bullseye systemd[1]: Condition check resulted in Kernel Configuration File System being skipped.
- ░░ Subject: A start job for unit sys-kernel-config.mount has finished successfully
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit sys-kernel-config.mount has finished successfully.
- ░░
- ░░ The job identifier is 482.
- Nov 08 16:33:58 bullseye systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
- ░░ Subject: A start job for unit systemd-pstore.service has finished successfully
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit systemd-pstore.service has finished successfully.
- ░░
- ░░ The job identifier is 493.
- Nov 08 16:33:58 bullseye systemd[1]: Found device ST1000LM024_HN-M101MBB 8.
- ░░ Subject: A start job for unit dev-disk-by\x2duuid-f3261512\x2d4d6d\x2d4f1e\x2d9bd6\x2dada3ca00b2ae.device has finished successfully
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit dev-disk-by\x2duuid-f3261512\x2d4d6d\x2d4f1e\x2d9bd6\x2dada3ca00b2ae.device has finished successfully.
- ░░
- ░░ The job identifier is 28.
- Nov 08 16:33:58 bullseye systemd[1]: Starting File System Check on /dev/disk/by-uuid/f3261512-4d6d-4f1e-9bd6-ada3ca00b2ae...
- ░░ Subject: A start job for unit systemd-fsck@dev-disk-by\x2duuid-f3261512\x2d4d6d\x2d4f1e\x2d9bd6\x2dada3ca00b2ae.service has begun execution
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit systemd-fsck@dev-disk-by\x2duuid-f3261512\x2d4d6d\x2d4f1e\x2d9bd6\x2dada3ca00b2ae.service has begun execution.
- ░░
- ░░ The job identifier is 26.
- Nov 08 16:33:58 bullseye systemd[1]: Started File System Check Daemon to report status.
- ░░ Subject: A start job for unit systemd-fsckd.service has finished successfully
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit systemd-fsckd.service has finished successfully.
- ░░
- ░░ The job identifier is 521.
- Nov 08 16:33:59 bullseye systemd[1]: Finished Flush Journal to Persistent Storage.
- ░░ Subject: A start job for unit systemd-journal-flush.service has finished successfully
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit systemd-journal-flush.service has finished successfully.
- ░░
- ░░ The job identifier is 18.
- Nov 08 16:34:00 bullseye systemd[1]: Found device ST1000LM024_HN-M101MBB 9.
- ░░ Subject: A start job for unit dev-disk-by\x2duuid-dab3b4f8\x2d60ba\x2d422c\x2d822a\x2de0a884b164a3.device has finished successfully
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit dev-disk-by\x2duuid-dab3b4f8\x2d60ba\x2d422c\x2d822a\x2de0a884b164a3.device has finished successfully.
- ░░
- ░░ The job identifier is 48.
- Nov 08 16:34:00 bullseye systemd[1]: Activating swap /dev/disk/by-uuid/dab3b4f8-60ba-422c-822a-e0a884b164a3...
- ░░ Subject: A start job for unit dev-disk-by\x2duuid-dab3b4f8\x2d60ba\x2d422c\x2d822a\x2de0a884b164a3.swap has begun execution
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit dev-disk-by\x2duuid-dab3b4f8\x2d60ba\x2d422c\x2d822a\x2de0a884b164a3.swap has begun execution.
- ░░
- ░░ The job identifier is 47.
- Nov 08 16:34:00 bullseye systemd[1]: Activated swap /dev/disk/by-uuid/dab3b4f8-60ba-422c-822a-e0a884b164a3.
- ░░ Subject: A start job for unit dev-disk-by\x2duuid-dab3b4f8\x2d60ba\x2d422c\x2d822a\x2de0a884b164a3.swap has finished successfully
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit dev-disk-by\x2duuid-dab3b4f8\x2d60ba\x2d422c\x2d822a\x2de0a884b164a3.swap has finished successfully.
- ░░
- ░░ The job identifier is 47.
- Nov 08 16:34:00 bullseye systemd[1]: Reached target Swap.
- ░░ Subject: A start job for unit swap.target has finished successfully
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit swap.target has finished successfully.
- ░░
- ░░ The job identifier is 46.
- Nov 08 16:34:00 bullseye kernel: Adding 2046972k swap on /dev/sda9. Priority:-2 extents:1 across:2046972k FS
- Nov 08 16:34:01 bullseye systemd-fsck[528]: /dev/sda8: clean, 22815/22110208 files, 2148462/88414208 blocks
- Nov 08 16:34:01 bullseye systemd[1]: Finished File System Check on /dev/disk/by-uuid/f3261512-4d6d-4f1e-9bd6-ada3ca00b2ae.
- ░░ Subject: A start job for unit systemd-fsck@dev-disk-by\x2duuid-f3261512\x2d4d6d\x2d4f1e\x2d9bd6\x2dada3ca00b2ae.service has finished successfully
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit systemd-fsck@dev-disk-by\x2duuid-f3261512\x2d4d6d\x2d4f1e\x2d9bd6\x2dada3ca00b2ae.service has finished successfully.
- ░░
- ░░ The job identifier is 26.
- Nov 08 16:34:01 bullseye systemd[1]: Mounting /home...
- ░░ Subject: A start job for unit home.mount has begun execution
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit home.mount has begun execution.
- ░░
- ░░ The job identifier is 25.
- Nov 08 16:34:01 bullseye kernel: EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
- Nov 08 16:34:01 bullseye systemd[1]: Mounted /home.
- ░░ Subject: A start job for unit home.mount has finished successfully
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit home.mount has finished successfully.
- ░░
- ░░ The job identifier is 25.
- Nov 08 16:34:01 bullseye systemd[1]: Reached target Local File Systems.
- ░░ Subject: A start job for unit local-fs.target has finished successfully
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit local-fs.target has finished successfully.
- ░░
- ░░ The job identifier is 24.
- Nov 08 16:34:01 bullseye systemd[1]: Starting Load AppArmor profiles...
- ░░ Subject: A start job for unit apparmor.service has begun execution
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit apparmor.service has begun execution.
- ░░
- ░░ The job identifier is 37.
- Nov 08 16:34:01 bullseye systemd[1]: Starting Tell Plymouth To Write Out Runtime Data...
- ░░ Subject: A start job for unit plymouth-read-write.service has begun execution
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit plymouth-read-write.service has begun execution.
- ░░
- ░░ The job identifier is 14.
- Nov 08 16:34:01 bullseye systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped.
- ░░ Subject: A start job for unit systemd-boot-system-token.service has finished successfully
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit systemd-boot-system-token.service has finished successfully.
- ░░
- ░░ The job identifier is 9.
- Nov 08 16:34:01 bullseye systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped.
- ░░ Subject: A start job for unit systemd-machine-id-commit.service has finished successfully
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit systemd-machine-id-commit.service has finished successfully.
- ░░
- ░░ The job identifier is 10.
- Nov 08 16:34:01 bullseye systemd[1]: Starting Create Volatile Files and Directories...
- ░░ Subject: A start job for unit systemd-tmpfiles-setup.service has begun execution
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit systemd-tmpfiles-setup.service has begun execution.
- ░░
- ░░ The job identifier is 45.
- Nov 08 16:34:01 bullseye systemd[1]: Received SIGRTMIN+20 from PID 201 (plymouthd).
- Nov 08 16:34:01 bullseye systemd[1]: Finished Tell Plymouth To Write Out Runtime Data.
- ░░ Subject: A start job for unit plymouth-read-write.service has finished successfully
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit plymouth-read-write.service has finished successfully.
- ░░
- ░░ The job identifier is 14.
- Nov 08 16:34:01 bullseye apparmor.systemd[532]: Restarting AppArmor
- Nov 08 16:34:01 bullseye apparmor.systemd[532]: Reloading AppArmor profiles
- Nov 08 16:34:01 bullseye systemd[1]: Finished Create Volatile Files and Directories.
- ░░ Subject: A start job for unit systemd-tmpfiles-setup.service has finished successfully
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit systemd-tmpfiles-setup.service has finished successfully.
- ░░
- ░░ The job identifier is 45.
- Nov 08 16:34:01 bullseye systemd[1]: Starting Network Time Synchronization...
- ░░ Subject: A start job for unit systemd-timesyncd.service has begun execution
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit systemd-timesyncd.service has begun execution.
- ░░
- ░░ The job identifier is 53.
- Nov 08 16:34:01 bullseye systemd[1]: Starting Update UTMP about System Boot/Shutdown...
- ░░ Subject: A start job for unit systemd-update-utmp.service has begun execution
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit systemd-update-utmp.service has begun execution.
- ░░
- ░░ The job identifier is 67.
- Nov 08 16:34:01 bullseye systemd[1]: Finished Update UTMP about System Boot/Shutdown.
- ░░ Subject: A start job for unit systemd-update-utmp.service has finished successfully
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit systemd-update-utmp.service has finished successfully.
- ░░
- ░░ The job identifier is 67.
- Nov 08 16:34:02 bullseye systemd-timesyncd[539]: The system is configured to read the RTC time in the local time zone. This mode cannot be fully supported. All system time to RTC updates are disabled.
- Nov 08 16:34:02 bullseye systemd[1]: Started Network Time Synchronization.
- ░░ Subject: A start job for unit systemd-timesyncd.service has finished successfully
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit systemd-timesyncd.service has finished successfully.
- ░░
- ░░ The job identifier is 53.
- Nov 08 16:34:02 bullseye systemd[1]: Reached target System Time Set.
- ░░ Subject: A start job for unit time-set.target has finished successfully
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit time-set.target has finished successfully.
- ░░
- ░░ The job identifier is 55.
- Nov 08 16:34:02 bullseye systemd[1]: Reached target System Time Synchronized.
- ░░ Subject: A start job for unit time-sync.target has finished successfully
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit time-sync.target has finished successfully.
- ░░
- ░░ The job identifier is 54.
- Nov 08 16:34:02 bullseye audit[544]: AVC apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=544 comm="apparmor_parser"
- Nov 08 16:34:02 bullseye kernel: audit: type=1400 audit(1604849642.387:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=544 comm="apparmor_parser"
- Nov 08 16:34:02 bullseye kernel: audit: type=1400 audit(1604849642.399:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=542 comm="apparmor_parser"
- Nov 08 16:34:02 bullseye kernel: audit: type=1400 audit(1604849642.407:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=545 comm="apparmor_parser"
- Nov 08 16:34:02 bullseye kernel: audit: type=1400 audit(1604849642.407:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=545 comm="apparmor_parser"
- Nov 08 16:34:02 bullseye kernel: audit: type=1400 audit(1604849642.407:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=545 comm="apparmor_parser"
- Nov 08 16:34:02 bullseye kernel: audit: type=1400 audit(1604849642.467:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=552 comm="apparmor_parser"
- Nov 08 16:34:02 bullseye kernel: audit: type=1400 audit(1604849642.471:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=543 comm="apparmor_parser"
- Nov 08 16:34:02 bullseye kernel: audit: type=1400 audit(1604849642.507:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=554 comm="apparmor_parser"
- Nov 08 16:34:02 bullseye kernel: audit: type=1400 audit(1604849642.507:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=554 comm="apparmor_parser"
- Nov 08 16:34:02 bullseye kernel: audit: type=1400 audit(1604849642.507:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="mariadbd_akonadi" pid=548 comm="apparmor_parser"
- Nov 08 16:34:02 bullseye audit[542]: AVC apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=542 comm="apparmor_parser"
- Nov 08 16:34:02 bullseye audit[545]: AVC apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=545 comm="apparmor_parser"
- Nov 08 16:34:02 bullseye audit[545]: AVC apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=545 comm="apparmor_parser"
- Nov 08 16:34:02 bullseye audit[545]: AVC apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=545 comm="apparmor_parser"
- Nov 08 16:34:02 bullseye audit[552]: AVC apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=552 comm="apparmor_parser"
- Nov 08 16:34:02 bullseye audit[543]: AVC apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=543 comm="apparmor_parser"
- Nov 08 16:34:02 bullseye audit[554]: AVC apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=554 comm="apparmor_parser"
- Nov 08 16:34:02 bullseye audit[554]: AVC apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=554 comm="apparmor_parser"
- Nov 08 16:34:02 bullseye audit[548]: AVC apparmor="STATUS" operation="profile_load" profile="unconfined" name="mariadbd_akonadi" pid=548 comm="apparmor_parser"
- Nov 08 16:34:02 bullseye audit[553]: AVC apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/haveged" pid=553 comm="apparmor_parser"
- Nov 08 16:34:02 bullseye audit[541]: AVC apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=541 comm="apparmor_parser"
- Nov 08 16:34:02 bullseye audit[541]: AVC apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=541 comm="apparmor_parser"
- Nov 08 16:34:02 bullseye audit[541]: AVC apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd//third_party" pid=541 comm="apparmor_parser"
- Nov 08 16:34:02 bullseye audit[551]: AVC apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=551 comm="apparmor_parser"
- Nov 08 16:34:02 bullseye audit[547]: AVC apparmor="STATUS" operation="profile_load" profile="unconfined" name="mysqld_akonadi" pid=547 comm="apparmor_parser"
- Nov 08 16:34:02 bullseye audit[555]: AVC apparmor="STATUS" operation="profile_load" profile="unconfined" name="postgresql_akonadi" pid=555 comm="apparmor_parser"
- Nov 08 16:34:02 bullseye audit[550]: AVC apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/akonadiserver" pid=550 comm="apparmor_parser"
- Nov 08 16:34:02 bullseye audit[546]: AVC apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-soffice" pid=546 comm="apparmor_parser"
- Nov 08 16:34:02 bullseye audit[546]: AVC apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-soffice//gpg" pid=546 comm="apparmor_parser"
- Nov 08 16:34:02 bullseye systemd[1]: Finished Load AppArmor profiles.
- ░░ Subject: A start job for unit apparmor.service has finished successfully
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit apparmor.service has finished successfully.
- ░░
- ░░ The job identifier is 37.
- Nov 08 16:34:02 bullseye systemd[1]: Reached target System Initialization.
- ░░ Subject: A start job for unit sysinit.target has finished successfully
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit sysinit.target has finished successfully.
- ░░
- ░░ The job identifier is 2.
- Nov 08 16:34:02 bullseye systemd[1]: Listening on CUPS Scheduler.
- ░░ Subject: A start job for unit cups.socket has finished successfully
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit cups.socket has finished successfully.
- ░░
- ░░ The job identifier is 76.
- Nov 08 16:34:02 bullseye systemd[1]: Listening on D-Bus System Message Bus Socket.
- ░░ Subject: A start job for unit dbus.socket has finished successfully
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit dbus.socket has finished successfully.
- ░░
- ░░ The job identifier is 153.
- Nov 08 16:34:02 bullseye systemd[1]: Condition check resulted in Manage Sound Card State (restore and store) being skipped.
- ░░ Subject: A start job for unit alsa-state.service has finished successfully
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit alsa-state.service has finished successfully.
- ░░
- ░░ The job identifier is 275.
- Nov 08 16:34:02 bullseye systemd[1]: Starting Save/Restore Sound Card State...
- ░░ Subject: A start job for unit alsa-restore.service has begun execution
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit alsa-restore.service has begun execution.
- ░░
- ░░ The job identifier is 335.
- Nov 08 16:34:02 bullseye systemd[1]: Starting Bluetooth service...
- ░░ Subject: A start job for unit bluetooth.service has begun execution
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit bluetooth.service has begun execution.
- ░░
- ░░ The job identifier is 460.
- Nov 08 16:34:02 bullseye systemd[1]: Started CUPS Scheduler.
- ░░ Subject: A start job for unit cups.service has finished successfully
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit cups.service has finished successfully.
- ░░
- ░░ The job identifier is 75.
- Nov 08 16:34:02 bullseye systemd[1]: Reached target Printer.
- ░░ Subject: A start job for unit printer.target has finished successfully
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit printer.target has finished successfully.
- ░░
- ░░ The job identifier is 74.
- Nov 08 16:34:02 bullseye systemd[1]: Starting IIO Sensor Proxy service...
- ░░ Subject: A start job for unit iio-sensor-proxy.service has begun execution
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit iio-sensor-proxy.service has begun execution.
- ░░
- ░░ The job identifier is 152.
- Nov 08 16:34:02 bullseye systemd[1]: Started Rescue Shell.
- ░░ Subject: A start job for unit rescue.service has finished successfully
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit rescue.service has finished successfully.
- ░░
- ░░ The job identifier is 61.
- Nov 08 16:34:02 bullseye systemd[1]: Reached target Rescue Mode.
- ░░ Subject: A start job for unit rescue.target has finished successfully
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit rescue.target has finished successfully.
- ░░
- ░░ The job identifier is 1.
- Nov 08 16:34:02 bullseye systemd[1]: Starting Update UTMP about System Runlevel Changes...
- ░░ Subject: A start job for unit systemd-update-utmp-runlevel.service has begun execution
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit systemd-update-utmp-runlevel.service has begun execution.
- ░░
- ░░ The job identifier is 66.
- Nov 08 16:34:02 bullseye systemd[1]: Started D-Bus System Message Bus.
- ░░ Subject: A start job for unit dbus.service has finished successfully
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit dbus.service has finished successfully.
- ░░
- ░░ The job identifier is 536.
- Nov 08 16:34:02 bullseye systemd[1]: Finished Save/Restore Sound Card State.
- ░░ Subject: A start job for unit alsa-restore.service has finished successfully
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit alsa-restore.service has finished successfully.
- ░░
- ░░ The job identifier is 335.
- Nov 08 16:34:02 bullseye systemd[1]: Reached target Sound Card.
- ░░ Subject: A start job for unit sound.target has finished successfully
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit sound.target has finished successfully.
- ░░
- ░░ The job identifier is 274.
- Nov 08 16:34:02 bullseye systemd[1]: systemd-update-utmp-runlevel.service: Succeeded.
- ░░ Subject: Unit succeeded
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ The unit systemd-update-utmp-runlevel.service has successfully entered the 'dead' state.
- Nov 08 16:34:02 bullseye systemd[1]: Finished Update UTMP about System Runlevel Changes.
- ░░ Subject: A start job for unit systemd-update-utmp-runlevel.service has finished successfully
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit systemd-update-utmp-runlevel.service has finished successfully.
- ░░
- ░░ The job identifier is 66.
- Nov 08 16:34:03 bullseye systemd[1]: systemd-rfkill.service: Succeeded.
- ░░ Subject: Unit succeeded
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ The unit systemd-rfkill.service has successfully entered the 'dead' state.
- Nov 08 16:34:03 bullseye bluetoothd[557]: Bluetooth daemon 5.55
- Nov 08 16:34:03 bullseye bluetoothd[557]: src/main.c:parse_controller_config() Key file does not have key “BRPageScanType” in group “Controller”
- Nov 08 16:34:03 bullseye bluetoothd[557]: src/main.c:parse_controller_config() Key file does not have key “BRPageScanInterval” in group “Controller”
- Nov 08 16:34:03 bullseye bluetoothd[557]: src/main.c:parse_controller_config() Key file does not have key “BRPageScanWindow” in group “Controller”
- Nov 08 16:34:03 bullseye bluetoothd[557]: src/main.c:parse_controller_config() Key file does not have key “BRInquiryScanType” in group “Controller”
- Nov 08 16:34:03 bullseye bluetoothd[557]: src/main.c:parse_controller_config() Key file does not have key “BRInquiryScanInterval” in group “Controller”
- Nov 08 16:34:03 bullseye bluetoothd[557]: src/main.c:parse_controller_config() Key file does not have key “BRInquiryScanWindow” in group “Controller”
- Nov 08 16:34:03 bullseye bluetoothd[557]: src/main.c:parse_controller_config() Key file does not have key “BRLinkSupervisionTimeout” in group “Controller”
- Nov 08 16:34:03 bullseye bluetoothd[557]: src/main.c:parse_controller_config() Key file does not have key “BRPageTimeout” in group “Controller”
- Nov 08 16:34:03 bullseye bluetoothd[557]: src/main.c:parse_controller_config() Key file does not have key “BRMinSniffInterval” in group “Controller”
- Nov 08 16:34:03 bullseye bluetoothd[557]: src/main.c:parse_controller_config() Key file does not have key “BRMaxSniffInterval” in group “Controller”
- Nov 08 16:34:03 bullseye bluetoothd[557]: src/main.c:parse_controller_config() Key file does not have key “LEMinAdvertisementInterval” in group “Controller”
- Nov 08 16:34:03 bullseye bluetoothd[557]: src/main.c:parse_controller_config() Key file does not have key “LEMaxAdvertisementInterval” in group “Controller”
- Nov 08 16:34:03 bullseye bluetoothd[557]: src/main.c:parse_controller_config() Key file does not have key “LEMultiAdvertisementRotationInterval” in group “Controller”
- Nov 08 16:34:03 bullseye bluetoothd[557]: src/main.c:parse_controller_config() Key file does not have key “LEScanIntervalAutoConnect” in group “Controller”
- Nov 08 16:34:03 bullseye bluetoothd[557]: src/main.c:parse_controller_config() Key file does not have key “LEScanWindowAutoConnect” in group “Controller”
- Nov 08 16:34:03 bullseye bluetoothd[557]: src/main.c:parse_controller_config() Key file does not have key “LEScanIntervalSuspend” in group “Controller”
- Nov 08 16:34:03 bullseye bluetoothd[557]: src/main.c:parse_controller_config() Key file does not have key “LEScanWindowSuspend” in group “Controller”
- Nov 08 16:34:03 bullseye bluetoothd[557]: src/main.c:parse_controller_config() Key file does not have key “LEScanIntervalDiscovery” in group “Controller”
- Nov 08 16:34:03 bullseye bluetoothd[557]: src/main.c:parse_controller_config() Key file does not have key “LEScanWindowDiscovery” in group “Controller”
- Nov 08 16:34:03 bullseye bluetoothd[557]: src/main.c:parse_controller_config() Key file does not have key “LEScanIntervalAdvMonitor” in group “Controller”
- Nov 08 16:34:03 bullseye bluetoothd[557]: src/main.c:parse_controller_config() Key file does not have key “LEScanWindowAdvMonitor” in group “Controller”
- Nov 08 16:34:03 bullseye bluetoothd[557]: src/main.c:parse_controller_config() Key file does not have key “LEScanIntervalConnect” in group “Controller”
- Nov 08 16:34:03 bullseye bluetoothd[557]: src/main.c:parse_controller_config() Key file does not have key “LEScanWindowConnect” in group “Controller”
- Nov 08 16:34:03 bullseye bluetoothd[557]: src/main.c:parse_controller_config() Key file does not have key “LEMinConnectionInterval” in group “Controller”
- Nov 08 16:34:03 bullseye bluetoothd[557]: src/main.c:parse_controller_config() Key file does not have key “LEMaxConnectionInterval” in group “Controller”
- Nov 08 16:34:03 bullseye bluetoothd[557]: src/main.c:parse_controller_config() Key file does not have key “LEConnectionLatency” in group “Controller”
- Nov 08 16:34:03 bullseye bluetoothd[557]: src/main.c:parse_controller_config() Key file does not have key “LEConnectionSupervisionTimeout” in group “Controller”
- Nov 08 16:34:03 bullseye bluetoothd[557]: src/main.c:parse_controller_config() Key file does not have key “LEAutoconnecttimeout” in group “Controller”
- Nov 08 16:34:05 bullseye systemd[1]: Started Bluetooth service.
- ░░ Subject: A start job for unit bluetooth.service has finished successfully
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit bluetooth.service has finished successfully.
- ░░
- ░░ The job identifier is 460.
- Nov 08 16:34:05 bullseye systemd[1]: Reached target Bluetooth.
- ░░ Subject: A start job for unit bluetooth.target has finished successfully
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit bluetooth.target has finished successfully.
- ░░
- ░░ The job identifier is 459.
- Nov 08 16:34:05 bullseye systemd[1]: Started IIO Sensor Proxy service.
- ░░ Subject: A start job for unit iio-sensor-proxy.service has finished successfully
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit iio-sensor-proxy.service has finished successfully.
- ░░
- ░░ The job identifier is 152.
- Nov 08 16:34:05 bullseye systemd[1]: Startup finished in 10.494s (kernel) + 17.504s (userspace) = 27.998s.
- ░░ Subject: System start-up is now complete
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ All system services necessary queued for starting at boot have been
- ░░ started. Note that this does not mean that the machine is now idle as services
- ░░ might still be busy with completing start-up.
- ░░
- ░░ Kernel start-up required 10494029 microseconds.
- ░░
- ░░ Initial RAM disk start-up required INITRD_USEC microseconds.
- ░░
- ░░ Userspace start-up required 17504679 microseconds.
- Nov 08 16:34:05 bullseye systemd[1]: System is tainted: local-hwclock
- ░░ Subject: The system is configured in a way that might cause problems
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ The following "tags" are possible:
- ░░ - "split-usr" — /usr is a separate file system and was not mounted when systemd
- ░░ was booted
- ░░ - "cgroups-missing" — the kernel was compiled without cgroup support or access
- ░░ to expected interface files is restricted
- ░░ - "var-run-bad" — /var/run is not a symlink to /run
- ░░ - "overflowuid-not-65534" — the kernel user ID used for "unknown" users (with
- ░░ NFS or user namespaces) is not 65534
- ░░ - "overflowgid-not-65534" — the kernel group ID used for "unknown" users (with
- ░░ NFS or user namespaces) is not 65534
- ░░ Current system is tagged as local-hwclock.
- Nov 08 16:34:05 bullseye systemd[1]: Received SIGRTMIN+21 from PID 201 (plymouthd).
- Nov 08 16:34:05 bullseye systemd[1]: iio-sensor-proxy.service: Succeeded.
- ░░ Subject: Unit succeeded
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ The unit iio-sensor-proxy.service has successfully entered the 'dead' state.
- Nov 08 16:34:05 bullseye systemd[1]: Received SIGRTMIN+21 from PID 201 (plymouthd).
- Nov 08 16:34:05 bullseye bluetoothd[557]: Starting SDP server
- Nov 08 16:34:05 bullseye kernel: Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- Nov 08 16:34:05 bullseye kernel: Bluetooth: BNEP filters: protocol multicast
- Nov 08 16:34:05 bullseye kernel: Bluetooth: BNEP socket layer initialized
- Nov 08 16:34:05 bullseye dbus-daemon[562]: [system] Activating via systemd: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop.hostname1.service' requested by ':1.2' (uid=0 pid=557 comm="/usr/libexec/bluetooth/bluetoothd ")
- Nov 08 16:34:05 bullseye bluetoothd[557]: Bluetooth management interface 1.18 initialized
- Nov 08 16:34:05 bullseye systemd[1]: Starting Hostname Service...
- ░░ Subject: A start job for unit systemd-hostnamed.service has begun execution
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit systemd-hostnamed.service has begun execution.
- ░░
- ░░ The job identifier is 617.
- Nov 08 16:34:05 bullseye kernel: NET: Registered protocol family 38
- Nov 08 16:34:05 bullseye bluetoothd[557]: profiles/sap/server.c:sap_server_register() Sap driver initialization failed.
- Nov 08 16:34:05 bullseye bluetoothd[557]: sap-server: Operation not permitted (1)
- Nov 08 16:34:05 bullseye dbus-daemon[562]: [system] Successfully activated service 'org.freedesktop.hostname1'
- Nov 08 16:34:05 bullseye systemd[1]: Started Hostname Service.
- ░░ Subject: A start job for unit systemd-hostnamed.service has finished successfully
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ A start job for unit systemd-hostnamed.service has finished successfully.
- ░░
- ░░ The job identifier is 617.
- Nov 08 16:34:31 bullseye systemd[1]: systemd-fsckd.service: Succeeded.
- ░░ Subject: Unit succeeded
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ The unit systemd-fsckd.service has successfully entered the 'dead' state.
- Nov 08 16:34:35 bullseye systemd[1]: systemd-hostnamed.service: Succeeded.
- ░░ Subject: Unit succeeded
- ░░ Defined-By: systemd
- ░░ Support: https://www.debian.org/support
- ░░
- ░░ The unit systemd-hostnamed.service has successfully entered the 'dead' state.
Quellcode
Hier kannst du den Code kopieren und ihn in deinen bevorzugten Editor einfügen. PASTEBIN_DOWNLOAD_SNIPPET_EXPLAIN