bootinfoscript
von oln- SNIPPET_TEXT:
-
- Boot Info Script 0.77 [10 June 2018]
- ============================= Boot Info Summary: ===============================
- => Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 2048
- of the same hard drive for core.img. core.img is at this location and
- looks for (,gpt2)/boot/grub. It also embeds following components:
- modules
- ---------------------------------------------------------------------------
- fshelp ext2 part_gpt biosdisk
- ---------------------------------------------------------------------------
- => No boot loader is installed in the MBR of /dev/sdb.
- => Syslinux MBR (5.00 and higher) is installed in the MBR of /dev/sdc.
- sda1: __________________________________________________________________________
- File system: BIOS Boot partition
- Boot sector type: Grub2's core.img
- Boot sector info:
- sda2: __________________________________________________________________________
- File system: ext4
- Boot sector type: -
- Boot sector info:
- Operating System: Debian GNU/Linux 10 (buster)
- Boot files: /boot/grub/grub.cfg /etc/fstab
- /boot/grub/i386-pc/core.img
- sda3: __________________________________________________________________________
- File system: swap
- Boot sector type: -
- Boot sector info:
- sdb1: __________________________________________________________________________
- File system: ext4
- Boot sector type: -
- Boot sector info:
- Operating System:
- Boot files:
- sdc1: __________________________________________________________________________
- File system: vfat
- Boot sector type: SYSLINUX 6.04
- Boot sector info: Syslinux looks at sector 16400 of /dev/sdc1 for its
- second stage. The integrity check of Syslinux failed.
- No errors found in the Boot Parameter Block.
- Operating System:
- Boot files: /boot/grub/grub.cfg /syslinux.cfg
- /efi/boot/bootx64.efi /efi/boot/grubx64.efi
- /ldlinux.sys
- ============================ Drive/Partition Info: =============================
- Drive: sda _____________________________________________________________________
- Disk /dev/sda: 3,7 TiB, 3999688294400 bytes, 7811891200 sectors
- Disk model: MR9363-4i
- Units: sectors of 1 * 512 = 512 bytes
- Sector size (logical/physical): 512 bytes / 512 bytes
- I/O size (minimum/optimal): 262144 bytes / 262144 bytes
- Partition Boot Start Sector End Sector # of Sectors Id System
- /dev/sda1 1 4,294,967,295 4,294,967,295 ee GPT
- GUID Partition Table detected.
- Partition Attrs Start Sector End Sector # of Sectors System
- /dev/sda1 2,048 4,095 2,048 BIOS Boot partition
- /dev/sda2 4,096 7,745,482,751 7,745,478,656 Data partition (Linux)
- /dev/sda3 7,745,482,752 7,811,889,151 66,406,400 Swap partition (Linux)
- Attributes: R=Required, N=No Block IO, B=Legacy BIOS Bootable, +=More bits set
- Drive: sdb _____________________________________________________________________
- Disk /dev/sdb: 5,5 TiB, 6001175126016 bytes, 11721045168 sectors
- Disk model: WDC WD60EFRX-68L
- Units: sectors of 1 * 512 = 512 bytes
- Sector size (logical/physical): 512 bytes / 4096 bytes
- I/O size (minimum/optimal): 4096 bytes / 4096 bytes
- Partition Boot Start Sector End Sector # of Sectors Id System
- /dev/sdb1 1 4,294,967,295 4,294,967,295 ee GPT
- GUID Partition Table detected.
- Partition Attrs Start Sector End Sector # of Sectors System
- /dev/sdb1 2,04811,721,043,96711,721,041,920 Data partition (Linux)
- Attributes: R=Required, N=No Block IO, B=Legacy BIOS Bootable, +=More bits set
- Drive: sdc _____________________________________________________________________
- Disk /dev/sdc: 3,8 GiB, 4009754624 bytes, 7831552 sectors
- Disk model: USB Flash Disk
- Units: sectors of 1 * 512 = 512 bytes
- Sector size (logical/physical): 512 bytes / 512 bytes
- I/O size (minimum/optimal): 512 bytes / 512 bytes
- Partition Boot Start Sector End Sector # of Sectors Id System
- /dev/sdc1 * 2,048 7,831,551 7,829,504 c W95 FAT32 (LBA)
- "blkid" output: ________________________________________________________________
- Device UUID TYPE LABEL
- /dev/sda1
- /dev/sda2 41403b16-cfdb-4678-8803-a2837bf76502 ext4
- /dev/sda3 b1771729-31f1-42a7-8132-8f62448886dc swap
- /dev/sdb1 55f564ef-a79b-4fc4-9711-4d4f9cd025e0 ext4
- /dev/sdc1 36DA-332E vfat DEBIAN 10_7
- ========================= "ls -l /dev/disk/by-id" output: ======================
- insgesamt 0
- lrwxrwxrwx 1 root root 9 Jan 7 07:46 ata-WDC_WD60EFRX-68L0BN1_WD-WX11D76NYTH0 -> ../../sdb
- lrwxrwxrwx 1 root root 10 Jan 7 07:46 ata-WDC_WD60EFRX-68L0BN1_WD-WX11D76NYTH0-part1 -> ../../sdb1
- lrwxrwxrwx 1 root root 9 Jan 7 07:46 scsi-3600605b00f9d5be0264706820ed21e59 -> ../../sda
- lrwxrwxrwx 1 root root 10 Jan 7 07:46 scsi-3600605b00f9d5be0264706820ed21e59-part1 -> ../../sda1
- lrwxrwxrwx 1 root root 10 Jan 7 07:46 scsi-3600605b00f9d5be0264706820ed21e59-part2 -> ../../sda2
- lrwxrwxrwx 1 root root 10 Jan 7 07:46 scsi-3600605b00f9d5be0264706820ed21e59-part3 -> ../../sda3
- lrwxrwxrwx 1 root root 9 Jan 7 07:46 usb-General_USB_Flash_Disk_033410000000D123-0:0 -> ../../sdc
- lrwxrwxrwx 1 root root 10 Jan 7 07:46 usb-General_USB_Flash_Disk_033410000000D123-0:0-part1 -> ../../sdc1
- lrwxrwxrwx 1 root root 9 Jan 7 07:46 wwn-0x50014ee26327a875 -> ../../sdb
- lrwxrwxrwx 1 root root 10 Jan 7 07:46 wwn-0x50014ee26327a875-part1 -> ../../sdb1
- lrwxrwxrwx 1 root root 9 Jan 7 07:46 wwn-0x600605b00f9d5be0264706820ed21e59 -> ../../sda
- lrwxrwxrwx 1 root root 10 Jan 7 07:46 wwn-0x600605b00f9d5be0264706820ed21e59-part1 -> ../../sda1
- lrwxrwxrwx 1 root root 10 Jan 7 07:46 wwn-0x600605b00f9d5be0264706820ed21e59-part2 -> ../../sda2
- lrwxrwxrwx 1 root root 10 Jan 7 07:46 wwn-0x600605b00f9d5be0264706820ed21e59-part3 -> ../../sda3
- ================================ Mount points: =================================
- Device Mount_Point Type Options
- /dev/sda2 / ext4 (rw,noatime,stripe=64)
- /dev/sdb1 /mnt/backup ext4 (rw,relatime,errors=remount-ro)
- =========================== sda2/boot/grub/grub.cfg: ===========================
- --------------------------------------------------------------------------------
- #
- # DO NOT EDIT THIS FILE
- #
- # It is automatically generated by grub-mkconfig using templates
- # from /etc/grub.d and settings from /etc/default/grub
- #
- ### BEGIN /etc/grub.d/00_header ###
- if [ -s $prefix/grubenv ]; then
- set have_grubenv=true
- load_env
- fi
- if [ "${next_entry}" ] ; then
- set default="${next_entry}"
- set next_entry=
- save_env next_entry
- set boot_once=true
- else
- set default="0"
- fi
- if [ x"${feature_menuentry_id}" = xy ]; then
- menuentry_id_option="--id"
- else
- menuentry_id_option=""
- fi
- export menuentry_id_option
- if [ "${prev_saved_entry}" ]; then
- set saved_entry="${prev_saved_entry}"
- save_env saved_entry
- set prev_saved_entry=
- save_env prev_saved_entry
- set boot_once=true
- fi
- function savedefault {
- if [ -z "${boot_once}" ]; then
- saved_entry="${chosen}"
- save_env saved_entry
- fi
- }
- function load_video {
- if [ x$feature_all_video_module = xy ]; then
- insmod all_video
- else
- insmod efi_gop
- insmod efi_uga
- insmod ieee1275_fb
- insmod vbe
- insmod vga
- insmod video_bochs
- insmod video_cirrus
- fi
- }
- if [ x$feature_default_font_path = xy ] ; then
- font=unicode
- else
- insmod part_gpt
- insmod ext2
- set root='hd0,gpt2'
- if [ x$feature_platform_search_hint = xy ]; then
- search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 41403b16-cfdb-4678-8803-a2837bf76502
- else
- search --no-floppy --fs-uuid --set=root 41403b16-cfdb-4678-8803-a2837bf76502
- fi
- font="/usr/share/grub/unicode.pf2"
- fi
- if loadfont $font ; then
- set gfxmode=auto
- load_video
- insmod gfxterm
- set locale_dir=$prefix/locale
- set lang=de_DE
- insmod gettext
- fi
- terminal_output gfxterm
- if [ "${recordfail}" = 1 ] ; then
- set timeout=30
- else
- if [ x$feature_timeout_style = xy ] ; then
- set timeout_style=menu
- set timeout=5
- # Fallback normal timeout code in case the timeout_style feature is
- # unavailable.
- else
- set timeout=5
- fi
- fi
- ### END /etc/grub.d/00_header ###
- ### BEGIN /etc/grub.d/05_debian_theme ###
- set menu_color_normal=cyan/blue
- set menu_color_highlight=white/blue
- ### END /etc/grub.d/05_debian_theme ###
- ### BEGIN /etc/grub.d/10_linux ###
- function gfxmode {
- set gfxpayload="${1}"
- }
- set linux_gfx_mode=
- export linux_gfx_mode
- menuentry 'Debian GNU/Linux' --class debian --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-41403b16-cfdb-4678-8803-a2837bf76502' {
- load_video
- insmod gzio
- if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
- insmod part_gpt
- insmod ext2
- set root='hd0,gpt2'
- if [ x$feature_platform_search_hint = xy ]; then
- search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 41403b16-cfdb-4678-8803-a2837bf76502
- else
- search --no-floppy --fs-uuid --set=root 41403b16-cfdb-4678-8803-a2837bf76502
- fi
- echo 'Linux 4.19.0-12-amd64 wird geladen …'
- linux /boot/vmlinuz-4.19.0-12-amd64 root=UUID=41403b16-cfdb-4678-8803-a2837bf76502 ro quiet
- echo 'Initiale Ramdisk wird geladen …'
- initrd /boot/initrd.img-4.19.0-12-amd64
- }
- submenu 'Erweiterte Optionen für Debian GNU/Linux' $menuentry_id_option 'gnulinux-advanced-41403b16-cfdb-4678-8803-a2837bf76502' {
- menuentry 'Debian GNU/Linux, mit Linux 4.19.0-12-amd64' --class debian --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.19.0-12-amd64-advanced-41403b16-cfdb-4678-8803-a2837bf76502' {
- load_video
- insmod gzio
- if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
- insmod part_gpt
- insmod ext2
- set root='hd0,gpt2'
- if [ x$feature_platform_search_hint = xy ]; then
- search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 41403b16-cfdb-4678-8803-a2837bf76502
- else
- search --no-floppy --fs-uuid --set=root 41403b16-cfdb-4678-8803-a2837bf76502
- fi
- echo 'Linux 4.19.0-12-amd64 wird geladen …'
- linux /boot/vmlinuz-4.19.0-12-amd64 root=UUID=41403b16-cfdb-4678-8803-a2837bf76502 ro quiet
- echo 'Initiale Ramdisk wird geladen …'
- initrd /boot/initrd.img-4.19.0-12-amd64
- }
- menuentry 'Debian GNU/Linux, with Linux 4.19.0-12-amd64 (recovery mode)' --class debian --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.19.0-12-amd64-recovery-41403b16-cfdb-4678-8803-a2837bf76502' {
- load_video
- insmod gzio
- if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
- insmod part_gpt
- insmod ext2
- set root='hd0,gpt2'
- if [ x$feature_platform_search_hint = xy ]; then
- search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 41403b16-cfdb-4678-8803-a2837bf76502
- else
- search --no-floppy --fs-uuid --set=root 41403b16-cfdb-4678-8803-a2837bf76502
- fi
- echo 'Linux 4.19.0-12-amd64 wird geladen …'
- linux /boot/vmlinuz-4.19.0-12-amd64 root=UUID=41403b16-cfdb-4678-8803-a2837bf76502 ro single
- echo 'Initiale Ramdisk wird geladen …'
- initrd /boot/initrd.img-4.19.0-12-amd64
- }
- }
- ### END /etc/grub.d/10_linux ###
- ### BEGIN /etc/grub.d/20_linux_xen ###
- ### END /etc/grub.d/20_linux_xen ###
- ### BEGIN /etc/grub.d/30_os-prober ###
- ### END /etc/grub.d/30_os-prober ###
- ### BEGIN /etc/grub.d/30_uefi-firmware ###
- ### END /etc/grub.d/30_uefi-firmware ###
- ### BEGIN /etc/grub.d/40_custom ###
- # This file provides an easy way to add custom menu entries. Simply type the
- # menu entries you want to add after this comment. Be careful not to change
- # the 'exec tail' line above.
- ### END /etc/grub.d/40_custom ###
- ### BEGIN /etc/grub.d/41_custom ###
- if [ -f ${config_directory}/custom.cfg ]; then
- source ${config_directory}/custom.cfg
- elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
- source $prefix/custom.cfg;
- fi
- ### END /etc/grub.d/41_custom ###
- --------------------------------------------------------------------------------
- =============================== sda2/etc/fstab: ================================
- --------------------------------------------------------------------------------
- # /etc/fstab: static file system information.
- #
- # Use 'blkid' to print the universally unique identifier for a
- # device; this may be used with UUID= as a more robust way to name devices
- # that works even if disks are added and removed. See fstab(5).
- #
- # <file system> <mount point> <type> <options> <dump> <pass>
- # / was on /dev/sda2 during installation
- UUID=41403b16-cfdb-4678-8803-a2837bf76502 / ext4 user_xattr,acl,barrier=1,noatime 0 0
- #UUID=41403b16-cfdb-4678-8803-a2837bf76502 / ext4 errors=remount-ro 0 1
- # swap was on /dev/sda3 during installation
- UUID=b1771729-31f1-42a7-8132-8f62448886dc none swap sw 0 0
- UUID=55f564ef-a79b-4fc4-9711-4d4f9cd025e0 /mnt/backup ext4 defaults,acl,errors=remount-ro 0 1
- --------------------------------------------------------------------------------
- =================== sda2: Location of files loaded by Grub: ====================
- GiB - GB File Fragment(s)
- 2075.041015625 = 2228.058324992 boot/grub/grub.cfg 2
- 1747.195831299 = 1876.037238784 boot/grub/i386-pc/core.img 1
- 1394.334991455 = 1497.155796992 boot/vmlinuz-4.19.0-12-amd64 2
- 1394.334991455 = 1497.155796992 vmlinuz 2
- 1394.334991455 = 1497.155796992 vmlinuz.old 2
- 1683.619052887 = 1807.772192768 boot/initrd.img-4.19.0-12-amd64 3
- 1683.619052887 = 1807.772192768 initrd.img 3
- 1683.619052887 = 1807.772192768 initrd.img.old 3
- =========================== sdc1/boot/grub/grub.cfg: ===========================
- --------------------------------------------------------------------------------
- if loadfont $prefix/font.pf2 ; then
- set gfxmode=800x600
- set gfxpayload=keep
- insmod efi_gop
- insmod efi_uga
- insmod video_bochs
- insmod video_cirrus
- insmod gfxterm
- insmod png
- terminal_output gfxterm
- fi
- if background_image /isolinux/splash.png; then
- set color_normal=light-gray/black
- set color_highlight=white/black
- elif background_image /splash.png; then
- set color_normal=light-gray/black
- set color_highlight=white/black
- else
- set menu_color_normal=cyan/blue
- set menu_color_highlight=white/blue
- fi
- insmod play
- play 960 440 1 0 4 440 1
- set theme=/boot/grub/theme/1
- menuentry --hotkey=g 'Graphical install' {
- set background_color=black
- linux /install.amd/vmlinuz vga=788 --- quiet
- initrd /install.amd/gtk/initrd.gz
- }
- menuentry --hotkey=i 'Install' {
- set background_color=black
- linux /install.amd/vmlinuz vga=788 --- quiet
- initrd /install.amd/initrd.gz
- }
- submenu --hotkey=a 'Advanced options ...' {
- set menu_color_normal=cyan/blue
- set menu_color_highlight=white/blue
- set theme=/boot/grub/theme/1-1
- set gfxpayload=keep
- menuentry '... Graphical expert install' {
- set background_color=black
- linux /install.amd/vmlinuz priority=low vga=788 ---
- initrd /install.amd/gtk/initrd.gz
- }
- menuentry '... Graphical rescue mode' {
- set background_color=black
- linux /install.amd/vmlinuz vga=788 rescue/enable=true --- quiet
- initrd /install.amd/gtk/initrd.gz
- }
- menuentry '... Graphical automated install' {
- set background_color=black
- linux /install.amd/vmlinuz auto=true priority=critical vga=788 --- quiet
- initrd /install.amd/gtk/initrd.gz
- }
- menuentry --hotkey=x '... Expert install' {
- set background_color=black
- linux /install.amd/vmlinuz priority=low vga=788 ---
- initrd /install.amd/initrd.gz
- }
- menuentry --hotkey=r '... Rescue mode' {
- set background_color=black
- linux /install.amd/vmlinuz vga=788 rescue/enable=true --- quiet
- initrd /install.amd/initrd.gz
- }
- menuentry --hotkey=a '... Automated install' {
- set background_color=black
- linux /install.amd/vmlinuz auto=true priority=critical vga=788 --- quiet
- initrd /install.amd/initrd.gz
- }
- submenu --hotkey=s '... Speech-enabled advanced options ...' {
- set menu_color_normal=cyan/blue
- set menu_color_highlight=white/blue
- set theme=/boot/grub/theme/1-1-1
- set gfxpayload=keep
- menuentry --hotkey=x '... Expert speech install' {
- set background_color=black
- linux /install.amd/vmlinuz priority=low vga=788 speakup.synth=soft ---
- initrd /install.amd/gtk/initrd.gz
- }
- menuentry --hotkey=r '... Rescue speech mode' {
- set background_color=black
- linux /install.amd/vmlinuz vga=788 rescue/enable=true speakup.synth=soft --- quiet
- initrd /install.amd/gtk/initrd.gz
- }
- menuentry --hotkey=a '... Automated speech install' {
- set background_color=black
- linux /install.amd/vmlinuz auto=true priority=critical vga=788 speakup.synth=soft --- quiet
- initrd /install.amd/gtk/initrd.gz
- }
- }
- }
- submenu --hotkey=d 'Accessible dark contrast installer menu ...' {
- set menu_color_normal=white/black
- set menu_color_highlight=yellow/black
- set color_normal=white/black
- set color_highlight=yellow/black
- background_image
- set theme=/boot/grub/theme/dark-1-2
- set gfxpayload=keep
- menuentry --hotkey=g '... Graphical install' {
- set background_color=black
- linux /install.amd/vmlinuz vga=788 theme=dark --- quiet
- initrd /install.amd/gtk/initrd.gz
- }
- menuentry --hotkey=i '... Install' {
- set background_color=black
- linux /install.amd/vmlinuz vga=788 theme=dark --- quiet
- initrd /install.amd/initrd.gz
- }
- submenu --hotkey=a '... Advanced options ...' {
- set menu_color_normal=white/black
- set menu_color_highlight=yellow/black
- set color_normal=white/black
- set color_highlight=yellow/black
- background_image
- set theme=/boot/grub/theme/dark-1-2-1
- set gfxpayload=keep
- menuentry '... Graphical expert install' {
- set background_color=black
- linux /install.amd/vmlinuz priority=low vga=788 theme=dark ---
- initrd /install.amd/gtk/initrd.gz
- }
- menuentry '... Graphical rescue mode' {
- set background_color=black
- linux /install.amd/vmlinuz vga=788 rescue/enable=true theme=dark --- quiet
- initrd /install.amd/gtk/initrd.gz
- }
- menuentry '... Graphical automated install' {
- set background_color=black
- linux /install.amd/vmlinuz auto=true priority=critical vga=788 theme=dark --- quiet
- initrd /install.amd/gtk/initrd.gz
- }
- menuentry --hotkey=x '... Expert install' {
- set background_color=black
- linux /install.amd/vmlinuz priority=low vga=788 theme=dark ---
- initrd /install.amd/initrd.gz
- }
- menuentry --hotkey=r '... Rescue mode' {
- set background_color=black
- linux /install.amd/vmlinuz vga=788 rescue/enable=true theme=dark --- quiet
- initrd /install.amd/initrd.gz
- }
- menuentry --hotkey=a '... Automated install' {
- set background_color=black
- linux /install.amd/vmlinuz auto=true priority=critical vga=788 theme=dark --- quiet
- initrd /install.amd/initrd.gz
- }
- }
- }
- menuentry --hotkey=s 'Install with speech synthesis' {
- set background_color=black
- linux /install.amd/vmlinuz vga=788 speakup.synth=soft --- quiet
- initrd /install.amd/gtk/initrd.gz
- }
- --------------------------------------------------------------------------------
- ============================== sdc1/syslinux.cfg: ==============================
- --------------------------------------------------------------------------------
- DEFAULT loadconfig
- LABEL loadconfig
- CONFIG /isolinux/isolinux.cfg
- APPEND /isolinux/
- --------------------------------------------------------------------------------
- =================== sdc1: Location of files loaded by Grub: ====================
- GiB - GB File Fragment(s)
- ?? = ?? boot/grub/grub.cfg 1
- ================= sdc1: Location of files loaded by Syslinux: ==================
- GiB - GB File Fragment(s)
- ?? = ?? syslinux.cfg 1
- ?? = ?? ldlinux.sys 1
Quellcode
Hier kannst du den Code kopieren und ihn in deinen bevorzugten Editor einfügen. PASTEBIN_DOWNLOAD_SNIPPET_EXPLAIN