NoPaste

sdc

von unix1988

SNIPPET_TEXT:
  1. smartctl -a /dev/sdc
  2. smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.14.0-0.bpo.2-amd64] (local build)
  3. Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
  4.  
  5. === START OF INFORMATION SECTION ===
  6. Model Family:     Seagate BarraCuda 3.5
  7. Device Model:     ST1000DM010-2EP102
  8. Serial Number:    ZN1LEW32
  9. LU WWN Device Id: 5 000c50 0c8581f24
  10. Firmware Version: CC43
  11. User Capacity:    1.000.204.886.016 bytes [1,00 TB]
  12. Sector Sizes:     512 bytes logical, 4096 bytes physical
  13. Rotation Rate:    7200 rpm
  14. Form Factor:      3.5 inches
  15. Device is:        In smartctl database [for details use: -P show]
  16. ATA Version is:   ATA8-ACS T13/1699-D revision 4
  17. SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
  18. Local Time is:    Sun Nov 14 21:22:49 2021 CET
  19. SMART support is: Available - device has SMART capability.
  20. SMART support is: Enabled
  21.  
  22. === START OF READ SMART DATA SECTION ===
  23. SMART overall-health self-assessment test result: PASSED
  24.  
  25. General SMART Values:
  26. Offline data collection status:  (0x82) Offline data collection activity
  27.                                         was completed without error.
  28.                                         Auto Offline Data Collection: Enabled.
  29. Self-test execution status:      ( 249) Self-test routine in progress...
  30.                                         90% of test remaining.
  31. Total time to complete Offline
  32. data collection:                (    0) seconds.
  33. Offline data collection
  34. capabilities:                    (0x7b) SMART execute Offline immediate.
  35.                                         Auto Offline data collection on/off support.
  36.                                         Suspend Offline collection upon new
  37.                                         command.
  38.                                         Offline surface scan supported.
  39.                                         Self-test supported.
  40.                                         Conveyance Self-test supported.
  41.                                         Selective Self-test supported.
  42. SMART capabilities:            (0x0003) Saves SMART data before entering
  43.                                         power-saving mode.
  44.                                         Supports SMART auto save timer.
  45. Error logging capability:        (0x01) Error logging supported.
  46.                                         General Purpose Logging supported.
  47. Short self-test routine
  48. recommended polling time:        (   1) minutes.
  49. Extended self-test routine
  50. recommended polling time:        ( 111) minutes.
  51. Conveyance self-test routine
  52. recommended polling time:        (   2) minutes.
  53. SCT capabilities:              (0x1085) SCT Status supported.
  54.  
  55. SMART Attributes Data Structure revision number: 10
  56. Vendor Specific SMART Attributes with Thresholds:
  57. ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  58.   1 Raw_Read_Error_Rate     0x000f   080   064   006    Pre-fail  Always       -       105705760
  59.   3 Spin_Up_Time            0x0003   097   097   000    Pre-fail  Always       -       0
  60.   4 Start_Stop_Count        0x0032   100   100   020    Old_age   Always       -       224
  61.   5 Reallocated_Sector_Ct   0x0033   100   100   010    Pre-fail  Always       -       0
  62.   7 Seek_Error_Rate         0x000f   072   060   045    Pre-fail  Always       -       20723789
  63.   9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       380
  64.  10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
  65.  12 Power_Cycle_Count       0x0032   100   100   020    Old_age   Always       -       224
  66. 183 Runtime_Bad_Block       0x0032   100   100   000    Old_age   Always       -       0
  67. 184 End-to-End_Error        0x0032   100   100   099    Old_age   Always       -       0
  68. 187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
  69. 188 Command_Timeout         0x0032   100   100   000    Old_age   Always       -       0 0 0
  70. 189 High_Fly_Writes         0x003a   100   100   000    Old_age   Always       -       0
  71. 190 Airflow_Temperature_Cel 0x0022   070   060   040    Old_age   Always       -       30 (Min/Max 27/30)
  72. 193 Load_Cycle_Count        0x0032   100   100   000    Old_age   Always       -       224
  73. 194 Temperature_Celsius     0x0022   030   018   000    Old_age   Always       -       30 (0 18 0 0 0)
  74. 195 Hardware_ECC_Recovered  0x001a   004   003   000    Old_age   Always       -       105705760
  75. 197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
  76. 198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
  77. 199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
  78. 240 Head_Flying_Hours       0x0000   100   253   000    Old_age   Offline      -       380h+22m+47.196s
  79. 241 Total_LBAs_Written      0x0000   100   253   000    Old_age   Offline      -       5055019391
  80. 242 Total_LBAs_Read         0x0000   100   253   000    Old_age   Offline      -       21911482475
  81.  
  82. SMART Error Log Version: 1
  83. No Errors Logged
  84.  
  85. SMART Self-test log structure revision number 1
  86. Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
  87. # 1  Extended offline    Self-test routine in progress 90%       380         -
  88. # 2  Extended offline    Completed without error       00%       355         -
  89. # 3  Extended offline    Completed without error       00%       338         -
  90. # 4  Extended offline    Completed without error       00%       313         -
  91. # 5  Extended offline    Completed without error       00%       293         -
  92. # 6  Extended offline    Completed without error       00%       277         -
  93. # 7  Extended offline    Completed without error       00%       257         -
  94. # 8  Extended offline    Completed without error       00%       239         -
  95. # 9  Extended offline    Completed without error       00%       229         -
  96. #10  Extended offline    Completed without error       00%       198         -
  97. #11  Extended offline    Completed without error       00%       175         -
  98. #12  Extended offline    Completed without error       00%       159         -
  99. #13  Extended offline    Completed without error       00%       134         -
  100. #14  Extended offline    Completed without error       00%       104         -
  101. #15  Extended offline    Completed without error       00%        82         -
  102. #16  Extended offline    Completed without error       00%        67         -
  103. #17  Extended offline    Completed without error       00%        30         -
  104. #18  Extended offline    Completed without error       00%         7         -
  105.  
  106. SMART Selective self-test log data structure revision number 1
  107.  SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
  108.     1        0        0  Not_testing
  109.     2        0        0  Not_testing
  110.     3        0        0  Not_testing
  111.     4        0        0  Not_testing
  112.     5        0        0  Not_testing
  113. Selective self-test flags (0x0):
  114.   After scanning selected spans, do NOT read-scan remainder of disk.
  115. If Selective self-test is pending on power-up, resume after 0 minute delay.

Quellcode

Hier kannst du den Code kopieren und ihn in deinen bevorzugten Editor einfügen. PASTEBIN_DOWNLOAD_SNIPPET_EXPLAIN