NoPaste

/dev/sda

von unix1988

SNIPPET_TEXT:
  1. smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.14.0-0.bpo.2-amd64] (local build)
  2. Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
  3.  
  4. === START OF INFORMATION SECTION ===
  5. Device Model:     SSD2SC480G726A104-46827799
  6. Serial Number:    PNY14060000429160461
  7. LU WWN Device Id: 5 f8db4c 146160461
  8. Firmware Version: 524ABBF0
  9. User Capacity:    480.103.981.056 bytes [480 GB]
  10. Sector Size:      512 bytes logical/physical
  11. Rotation Rate:    Solid State Device
  12. Form Factor:      2.5 inches
  13. TRIM Command:     Available
  14. Device is:        Not in smartctl database [for details use: -P showall]
  15. ATA Version is:   ATA8-ACS, ACS-2 T13/2015-D revision 3
  16. SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
  17. Local Time is:    Sun Jan  9 21:40:27 2022 CET
  18. SMART support is: Available - device has SMART capability.
  19. SMART support is: Enabled
  20.  
  21. === START OF READ SMART DATA SECTION ===
  22. SMART overall-health self-assessment test result: PASSED
  23.  
  24. General SMART Values:
  25. Offline data collection status:  (0x02) Offline data collection activity
  26.                                         was completed without error.
  27.                                         Auto Offline Data Collection: Disabled.
  28. Self-test execution status:      (   0) The previous self-test routine completed
  29.                                         without error or no self-test has ever
  30.                                         been run.
  31. Total time to complete Offline
  32. data collection:                (    0) seconds.
  33. Offline data collection
  34. capabilities:                    (0x79) SMART execute Offline immediate.
  35.                                         No Auto Offline data collection support.
  36.                                         Suspend Offline collection upon new
  37.                                         command.
  38.                                         Offline surface scan supported.
  39.                                         Self-test supported.
  40.                                         Conveyance Self-test supported.
  41.                                         Selective Self-test supported.
  42. SMART capabilities:            (0x0003) Saves SMART data before entering
  43.                                         power-saving mode.
  44.                                         Supports SMART auto save timer.
  45. Error logging capability:        (0x01) Error logging supported.
  46.                                         General Purpose Logging supported.
  47. Short self-test routine
  48. recommended polling time:        (   1) minutes.
  49. Extended self-test routine
  50. recommended polling time:        (  60) minutes.
  51. Conveyance self-test routine
  52. recommended polling time:        (   2) minutes.
  53. SCT capabilities:              (0x0025) SCT Status supported.
  54.                                         SCT Data Table supported.
  55.  
  56. SMART Attributes Data Structure revision number: 10
  57. Vendor Specific SMART Attributes with Thresholds:
  58. ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  59.   1 Raw_Read_Error_Rate     0x0033   120   120   050    Pre-fail  Always       -       8589934592
  60.   5 Reallocated_Sector_Ct   0x0033   100   100   003    Pre-fail  Always       -       0
  61.   9 Power_On_Hours          0x0032   099   099   000    Old_age   Always       -       1262 (221 134 0)
  62.  12 Power_Cycle_Count       0x0032   098   098   000    Old_age   Always       -       2632
  63. 171 Unknown_Attribute       0x000a   000   000   000    Old_age   Always       -       0
  64. 172 Unknown_Attribute       0x0032   000   000   000    Old_age   Always       -       0
  65. 174 Unknown_Attribute       0x0030   000   000   000    Old_age   Offline      -       66
  66. 177 Wear_Leveling_Count     0x0000   000   000   000    Old_age   Offline      -       11
  67. 181 Program_Fail_Cnt_Total  0x000a   000   000   000    Old_age   Always       -       0
  68. 182 Erase_Fail_Count_Total  0x0032   000   000   000    Old_age   Always       -       0
  69. 187 Reported_Uncorrect      0x0012   100   100   000    Old_age   Always       -       0
  70. 194 Temperature_Celsius     0x0022   031   057   000    Old_age   Always       -       31 (Min/Max -20/57)
  71. 195 Hardware_ECC_Recovered  0x001c   120   120   000    Old_age   Offline      -       8589934592
  72. 196 Reallocated_Event_Count 0x0033   100   100   003    Pre-fail  Always       -       0
  73. 201 Unknown_SSD_Attribute   0x001c   120   120   000    Old_age   Offline      -       8589934592
  74. 204 Soft_ECC_Correction     0x001c   120   120   000    Old_age   Offline      -       8589934592
  75. 230 Unknown_SSD_Attribute   0x0013   100   100   000    Pre-fail  Always       -       100
  76. 231 Unknown_SSD_Attribute   0x0013   099   099   010    Pre-fail  Always       -       0
  77. 233 Media_Wearout_Indicator 0x0032   000   000   000    Old_age   Always       -       49940
  78. 234 Unknown_Attribute       0x0032   000   000   000    Old_age   Always       -       26887
  79. 241 Total_LBAs_Written      0x0032   000   000   000    Old_age   Always       -       26887
  80. 242 Total_LBAs_Read         0x0032   000   000   000    Old_age   Always       -       22854
  81.  
  82. SMART Error Log not supported
  83.  
  84. SMART Self-test Log not supported
  85.  
  86. SMART Selective self-test log data structure revision number 1
  87.  SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
  88.     1        0        0  Not_testing
  89.     2        0        0  Not_testing
  90.     3        0        0  Not_testing
  91.     4        0        0  Not_testing
  92.     5        0        0  Not_testing
  93. Selective self-test flags (0x0):
  94.   After scanning selected spans, do NOT read-scan remainder of disk.
  95. If Selective self-test is pending on power-up, resume after 0 minute delay.

Quellcode

Hier kannst du den Code kopieren und ihn in deinen bevorzugten Editor einfügen. PASTEBIN_DOWNLOAD_SNIPPET_EXPLAIN