NoPaste

wpa_config

von Mausklix

SNIPPET_TEXT:
  1. wpa_supplicant v2.10
  2. random: getrandom() support available
  3. Successfully initialized wpa_supplicant
  4. Initializing interface 'wlp2s0' conf '/etc/wpa_supplicant/wpa_supplicant.conf' driver 'nl80211' ctrl_interface 'N/A' bridge 'N/A'
  5. Configuration file '/etc/wpa_supplicant/wpa_supplicant.conf' -> '/etc/wpa_supplicant/wpa_supplicant.conf'
  6. Reading configuration file '/etc/wpa_supplicant/wpa_supplicant.conf'
  7. ctrl_interface='DIR=/var/run/wpa_supplicant GROUP=netdev'
  8. update_config=0
  9. Priority group 0
  10.    id=0 ssid='Holzklotz'
  11. nl80211: Supported cipher 00-0f-ac:1
  12. nl80211: Supported cipher 00-0f-ac:5
  13. nl80211: Supported cipher 00-0f-ac:2
  14. nl80211: Supported cipher 00-0f-ac:4
  15. nl80211: Supported cipher 00-0f-ac:10
  16. nl80211: Supported cipher 00-0f-ac:8
  17. nl80211: Supported cipher 00-0f-ac:9
  18. nl80211: Using driver-based off-channel TX
  19. nl80211: Driver-advertised extended capabilities (default) - hexdump(len=8): 00 00 00 00 00 00 00 40
  20. nl80211: Driver-advertised extended capabilities mask (default) - hexdump(len=8): 00 00 00 00 00 00 00 40
  21. nl80211: key_mgmt=0x1ff0f enc=0xef auth=0x7 flags=0x840005105b03d0e0 rrm_flags=0x10 probe_resp_offloads=0x0 max_stations=0 max_remain_on_chan=5000 max_scan_ssids=20
  22. nl80211: interface wlp2s0 in phy phy0
  23. nl80211: Set mode ifindex 3 iftype 2 (STATION)
  24. nl80211: Subscribe to mgmt frames with non-AP handle 0x560540ae3880
  25. nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x560540ae3880 match=0104 multicast=0
  26. nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x560540ae3880 match=040a multicast=0
  27. nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x560540ae3880 match=040b multicast=0
  28. nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x560540ae3880 match=040c multicast=0
  29. nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x560540ae3880 match=040d multicast=0
  30. nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x560540ae3880 match=090a multicast=0
  31. nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x560540ae3880 match=090b multicast=0
  32. nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x560540ae3880 match=090c multicast=0
  33. nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x560540ae3880 match=090d multicast=0
  34. nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x560540ae3880 match=0409506f9a09 multicast=0
  35. nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x560540ae3880 match=7f506f9a09 multicast=0
  36. nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x560540ae3880 match=0409506f9a1a multicast=0
  37. nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x560540ae3880 match=0800 multicast=0
  38. nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x560540ae3880 match=0801 multicast=0
  39. nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x560540ae3880 match=12 multicast=0
  40. nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x560540ae3880 match=06 multicast=0
  41. nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x560540ae3880 match=0a07 multicast=0
  42. nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x560540ae3880 match=0a11 multicast=0
  43. nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x560540ae3880 match=0a0b multicast=0
  44. nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x560540ae3880 match=0a1a multicast=0
  45. nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x560540ae3880 match=1101 multicast=0
  46. nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x560540ae3880 match=1102 multicast=0
  47. nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x560540ae3880 match=0505 multicast=0
  48. nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x560540ae3880 match=0500 multicast=0
  49. nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x560540ae3880 match=1301 multicast=0
  50. nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x560540ae3880 match=1305 multicast=0
  51. nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x560540ae3880 match=7e506f9a1a multicast=0
  52. rfkill: initial event: idx=3 type=1 op=0 soft=0 hard=0
  53. netlink: Operstate: ifindex=3 linkmode=1 (userspace-control), operstate=5 (IF_OPER_DORMANT)
  54. Add interface wlp2s0 to a new radio phy0
  55. nl80211: Regulatory information - country=00
  56. nl80211: 2402-2472 @ 40 MHz 20 mBm
  57. nl80211: 2457-2482 @ 20 MHz 20 mBm (no IR)
  58. nl80211: 2474-2494 @ 20 MHz 20 mBm (no OFDM) (no IR)
  59. nl80211: 5170-5250 @ 80 MHz 20 mBm (no IR)
  60. nl80211: 5250-5330 @ 80 MHz 20 mBm (DFS) (no IR)
  61. nl80211: 5490-5730 @ 160 MHz 20 mBm (DFS) (no IR)
  62. nl80211: 5735-5835 @ 80 MHz 20 mBm (no IR)
  63. nl80211: 57240-63720 @ 2160 MHz 0 mBm
  64. nl80211: Added 802.11b mode based on 802.11g information
  65. nl80211: Mode IEEE 802.11g: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467[NO_IR] 2472[NO_IR]
  66. nl80211: Mode IEEE 802.11a: 5180[NO_IR] 5200[NO_IR] 5220[NO_IR] 5240[NO_IR] 5260[NO_IR][RADAR] 5280[NO_IR][RADAR] 5300[NO_IR][RADAR] 5320[NO_IR][RADAR] 5500[NO_IR][RADAR] 5520[NO_IR][RADAR] 5540[NO_IR][RADAR]
  67. nl80211: Mode IEEE 802.11b: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467[NO_IR] 2472[NO_IR]
  68. wlp2s0: Own MAC address: 10:0b:a9:75:ea:f8
  69. wpa_driver_nl80211_set_key: ifindex=3 (wlp2s0) alg=0 addr=(nil) key_idx=0 set_tx=0 seq_len=0 key_len=0 key_flag=0x10
  70. nl80211: DEL_KEY
  71.    broadcast key
  72. wpa_driver_nl80211_set_key: ifindex=3 (wlp2s0) alg=0 addr=(nil) key_idx=1 set_tx=0 seq_len=0 key_len=0 key_flag=0x10
  73. nl80211: DEL_KEY
  74.    broadcast key
  75. wpa_driver_nl80211_set_key: ifindex=3 (wlp2s0) alg=0 addr=(nil) key_idx=2 set_tx=0 seq_len=0 key_len=0 key_flag=0x10
  76. nl80211: DEL_KEY
  77.    broadcast key
  78. wpa_driver_nl80211_set_key: ifindex=3 (wlp2s0) alg=0 addr=(nil) key_idx=3 set_tx=0 seq_len=0 key_len=0 key_flag=0x10
  79. nl80211: DEL_KEY
  80.    broadcast key
  81. wpa_driver_nl80211_set_key: ifindex=3 (wlp2s0) alg=0 addr=(nil) key_idx=4 set_tx=0 seq_len=0 key_len=0 key_flag=0x10
  82. nl80211: DEL_KEY
  83.    broadcast key
  84. nl80211: set_key failed; err=-22 Invalid argument
  85. wpa_driver_nl80211_set_key: ifindex=3 (wlp2s0) alg=0 addr=(nil) key_idx=5 set_tx=0 seq_len=0 key_len=0 key_flag=0x10
  86. nl80211: DEL_KEY
  87.    broadcast key
  88. nl80211: set_key failed; err=-22 Invalid argument
  89. wlp2s0: RSN: flushing PMKID list in the driver
  90. nl80211: Flush PMKIDs
  91. wlp2s0: Setting scan request: 0.100000 sec
  92. TDLS: TDLS operation not supported by driver
  93. TDLS: Driver uses internal link setup
  94. TDLS: Driver does not support TDLS channel switching
  95. wlp2s0: WPS: UUID based on MAC address: 2ffc9c9d-6d2e-5da8-8190-79294a792bc9
  96. ENGINE: Loading builtin engines
  97. ENGINE: Loading builtin engines
  98. EAPOL: SUPP_PAE entering state DISCONNECTED
  99. EAPOL: Supplicant port status: Unauthorized
  100. nl80211: Skip set_supp_port(unauthorized) while not associated
  101. EAPOL: KEY_RX entering state NO_KEY_RECEIVE
  102. EAPOL: SUPP_BE entering state INITIALIZE
  103. EAP: EAP entering state DISABLED
  104. ctrl_interface_group=106 (from group name 'netdev')
  105. MBO: Update non-preferred channels, non_pref_chan=N/A
  106. wlp2s0: Added interface wlp2s0
  107. wlp2s0: State: DISCONNECTED -> DISCONNECTED
  108. nl80211: Set wlp2s0 operstate 0->0 (DORMANT)
  109. netlink: Operstate: ifindex=3 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT)
  110. RTM_NEWLINK: ifi_index=3 ifname=wlp2s0 operstate=2 linkmode=0 ifi_family=0 ifi_flags=0x1003 ([UP])
  111. RTM_NEWLINK: ifi_index=3 ifname=wlp2s0 operstate=2 linkmode=1 ifi_family=0 ifi_flags=0x1003 ([UP])
  112. wlp2s0: State: DISCONNECTED -> SCANNING
  113. wlp2s0: Starting AP scan for wildcard SSID
  114. wlp2s0: Add radio work 'scan'@0x560540b53670
  115. wlp2s0: First radio work item in the queue - schedule start immediately
  116. wlp2s0: Starting radio work 'scan'@0x560540b53670 after 0.000042 second wait
  117. wlp2s0: nl80211: scan request
  118. Scan requested (ret=0) - scan timeout 10 seconds
  119. nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp2s0
  120. wlp2s0: nl80211: Scan trigger
  121. wlp2s0: Event SCAN_STARTED (47) received
  122. wlp2s0: Own scan request started a scan in 0.000114 seconds
  123. EAPOL: disable timer tick
  124. RTM_NEWLINK: ifi_index=3 ifname=wlp2s0 wext ifi_family=0 ifi_flags=0x1003 ([UP])
  125. nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp2s0
  126. wlp2s0: nl80211: New scan results available
  127. nl80211: Scan probed for SSID ''
  128. nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467 2472 5180 5200 5220 5240 5260 5280 5300 5320 5500 5520 5540 5560 5580 5600 5620 5640 5660 5680 5700 5745 5765 5785 5805 5825
  129. wlp2s0: Event SCAN_RESULTS (3) received
  130. wlp2s0: Scan completed in 3.057336 seconds
  131. nl80211: Received scan results (2 BSSes)
  132. wlp2s0: BSS: Start scan result update 1
  133. wlp2s0: BSS: Add new id 0 BSSID 20:b5:c6:00:32:d7 SSID 'xdQcUXqJlxnj5OmEBSQHOjt6tfsCO7rl' freq 5765
  134. wlp2s0: BSS: Add new id 1 BSSID 00:1e:c0:63:55:10 SSID 'XR18-63-55-10' freq 2412
  135. BSS: last_scan_res_used=2/32
  136. wlp2s0: New scan results available (own=1 ext=0)
  137. wlp2s0: Radio work 'scan'@0x560540b53670 done in 3.059583 seconds
  138. wlp2s0: radio_work_free('scan'@0x560540b53670): num_active_works --> 0
  139. wlp2s0: Selecting BSS from priority group 0
  140. wlp2s0: 0: 20:b5:c6:00:32:d7 ssid='xdQcUXqJlxnj5OmEBSQHOjt6tfsCO7rl' wpa_ie_len=0 rsn_ie_len=20 caps=0x511 level=-88 freq=5765
  141. wlp2s0:    skip - SSID mismatch
  142. wlp2s0: 1: 00:1e:c0:63:55:10 ssid='XR18-63-55-10' wpa_ie_len=0 rsn_ie_len=0 caps=0x21 level=-71 freq=2412
  143. wlp2s0:    skip - SSID mismatch
  144. wlp2s0: No suitable network found
  145. wlp2s0: Setting scan request: 5.000000 sec
  146. wlp2s0: Starting AP scan for wildcard SSID
  147. wlp2s0: Determining shared radio frequencies (max len 1)
  148. wlp2s0: Shared frequencies (len=0): completed iteration
  149. wlp2s0: Add radio work 'scan'@0x560540b53670
  150. wlp2s0: First radio work item in the queue - schedule start immediately
  151. wlp2s0: Starting radio work 'scan'@0x560540b53670 after 0.000042 second wait
  152. wlp2s0: nl80211: scan request
  153. Scan requested (ret=0) - scan timeout 30 seconds
  154. nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp2s0
  155. wlp2s0: nl80211: Scan trigger
  156. wlp2s0: Event SCAN_STARTED (47) received
  157. wlp2s0: Own scan request started a scan in 0.000115 seconds
  158. RTM_NEWLINK: ifi_index=3 ifname=wlp2s0 wext ifi_family=0 ifi_flags=0x1003 ([UP])
  159. nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp2s0
  160. wlp2s0: nl80211: New scan results available
  161. nl80211: Scan probed for SSID ''
  162. nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467 2472 5180 5200 5220 5240 5260 5280 5300 5320 5500 5520 5540 5560 5580 5600 5620 5640 5660 5680 5700 5745 5765 5785 5805 5825
  163. wlp2s0: Event SCAN_RESULTS (3) received
  164. wlp2s0: Scan completed in 3.166757 seconds
  165. nl80211: Received scan results (2 BSSes)
  166. wlp2s0: BSS: Start scan result update 2
  167. BSS: last_scan_res_used=2/32
  168. wlp2s0: New scan results available (own=1 ext=0)
  169. wlp2s0: Radio work 'scan'@0x560540b53670 done in 3.168688 seconds
  170. wlp2s0: radio_work_free('scan'@0x560540b53670): num_active_works --> 0
  171. wlp2s0: Selecting BSS from priority group 0
  172. wlp2s0: 0: 20:b5:c6:00:32:d7 ssid='xdQcUXqJlxnj5OmEBSQHOjt6tfsCO7rl' wpa_ie_len=0 rsn_ie_len=20 caps=0x511 level=-88 freq=5765
  173. wlp2s0:    skip - SSID mismatch
  174. wlp2s0: 1: 00:1e:c0:63:55:10 ssid='XR18-63-55-10' wpa_ie_len=0 rsn_ie_len=0 caps=0x21 level=-68 freq=2412
  175. wlp2s0:    skip - SSID mismatch
  176. wlp2s0: No suitable network found
  177. wlp2s0: Setting scan request: 5.000000 sec
  178. wlp2s0: Starting AP scan for wildcard SSID
  179. wlp2s0: Determining shared radio frequencies (max len 1)
  180. wlp2s0: Shared frequencies (len=0): completed iteration
  181. wlp2s0: Add radio work 'scan'@0x560540b53670
  182. wlp2s0: First radio work item in the queue - schedule start immediately
  183. wlp2s0: Starting radio work 'scan'@0x560540b53670 after 0.000044 second wait
  184. wlp2s0: nl80211: scan request
  185. Scan requested (ret=0) - scan timeout 30 seconds
  186. nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp2s0
  187. wlp2s0: nl80211: Scan trigger
  188. wlp2s0: Event SCAN_STARTED (47) received
  189. wlp2s0: Own scan request started a scan in 0.000129 seconds
  190. RTM_NEWLINK: ifi_index=3 ifname=wlp2s0 wext ifi_family=0 ifi_flags=0x1003 ([UP])
  191. nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp2s0
  192. wlp2s0: nl80211: New scan results available
  193. nl80211: Scan probed for SSID ''
  194. nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467 2472 5180 5200 5220 5240 5260 5280 5300 5320 5500 5520 5540 5560 5580 5600 5620 5640 5660 5680 5700 5745 5765 5785 5805 5825
  195. wlp2s0: Event SCAN_RESULTS (3) received
  196. wlp2s0: Scan completed in 3.174543 seconds
  197. nl80211: Received scan results (3 BSSes)
  198. wlp2s0: BSS: Start scan result update 3
  199. wlp2s0: BSS: Add new id 2 BSSID 76:0b:b0:7b:dd:5e SSID 'Holzklotz' freq 2437
  200. BSS: last_scan_res_used=3/32
  201. wlp2s0: New scan results available (own=1 ext=0)
  202. wlp2s0: Radio work 'scan'@0x560540b53670 done in 3.176535 seconds
  203. wlp2s0: radio_work_free('scan'@0x560540b53670): num_active_works --> 0
  204. wlp2s0: Selecting BSS from priority group 0
  205. wlp2s0: 0: 76:0b:b0:7b:dd:5e ssid='Holzklotz' wpa_ie_len=0 rsn_ie_len=20 caps=0x1431 level=-40 freq=2437
  206. wlp2s0:    selected based on RSN IE
  207. wlp2s0:    selected BSS 76:0b:b0:7b:dd:5e ssid='Holzklotz'
  208. wlp2s0: Considering connect request: reassociate: 0  selected: 76:0b:b0:7b:dd:5e  bssid: 00:00:00:00:00:00  pending: 00:00:00:00:00:00  wpa_state: SCANNING  ssid=0x560540ae3990  current_ssid=(nil)
  209. wlp2s0: Request association with 76:0b:b0:7b:dd:5e
  210. TDLS: TDLS is allowed in the target BSS
  211. TDLS: TDLS channel switch allowed in the target BSS
  212. wlp2s0: No ongoing scan/p2p-scan found to abort
  213. wlp2s0: Add radio work 'sme-connect'@0x560540b53670
  214. wlp2s0: First radio work item in the queue - schedule start immediately
  215. wlp2s0: Starting radio work 'sme-connect'@0x560540b53670 after 0.000044 second wait
  216. wlp2s0: WPA: clearing own WPA/RSN IE
  217. wlp2s0: RSN: clearing own RSNXE
  218. wlp2s0: Automatic auth_alg selection: 0x1
  219. RSN: PMKSA cache search - network_ctx=(nil) try_opportunistic=0 akmp=0x0
  220. RSN: Search for BSSID 76:0b:b0:7b:dd:5e
  221. RSN: No PMKSA cache entry found
  222. wlp2s0: RSN: using IEEE 802.11i/D9.0
  223. wlp2s0: WPA: Selected cipher suites: group 16 pairwise 16 key_mgmt 2 proto 2
  224. wlp2s0: WPA: Selected mgmt group cipher 32
  225. wlp2s0: WPA: clearing AP WPA IE
  226. WPA: set AP RSN IE - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 0c 00
  227. wlp2s0: WPA: clearing AP RSNXE
  228. wlp2s0: WPA: AP group 0x10 network profile group 0x18; available group 0x10
  229. wlp2s0: WPA: using GTK CCMP
  230. wlp2s0: WPA: AP pairwise 0x10 network profile pairwise 0x18; available pairwise 0x10
  231. wlp2s0: WPA: using PTK CCMP
  232. wlp2s0: WPA: AP key_mgmt 0x2 network profile key_mgmt 0x3; available key_mgmt 0x2
  233. wlp2s0: WPA: using KEY_MGMT WPA-PSK
  234. wlp2s0: WPA: AP mgmt_group_cipher 0x20 network profile mgmt_group_cipher 0x0; available mgmt_group_cipher 0x0
  235. wlp2s0: WPA: not using MGMT group cipher
  236. WPA: Set own WPA IE default - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00
  237. RSN: Set own RSNXE default - hexdump(len=0):
  238. WPA: Set PMK based on external data - hexdump(len=32): [REMOVED]
  239. RRM: Determining whether RRM can be used - device support: 0x10
  240. RRM: No RRM in network
  241. Added supported operating classes IE - hexdump(len=19): 3b 11 51 51 53 54 73 74 75 76 77 78 79 7a 7b 7c 7d 7e 7f
  242. EAPOL: External notification - EAP success=0
  243. EAPOL: External notification - EAP fail=0
  244. EAPOL: External notification - portControl=Auto
  245. wlp2s0: Cancelling scan request
  246. wlp2s0: SME: Trying to authenticate with 76:0b:b0:7b:dd:5e (SSID='Holzklotz' freq=2437 MHz)
  247. EAPOL: External notification - portValid=0
  248. wlp2s0: State: SCANNING -> AUTHENTICATING
  249. Not configuring frame filtering - BSS 00:00:00:00:00:00 is not a Hotspot 2.0 network
  250. wlp2s0: Determining shared radio frequencies (max len 1)
  251. wlp2s0: Shared frequencies (len=0): completed iteration
  252. nl80211: Authenticate (ifindex=3)
  253.   * bssid=76:0b:b0:7b:dd:5e
  254.   * freq=2437
  255.   * SSID=Holzklotz
  256.   * IEs - hexdump(len=0): [NULL]
  257.   * Auth Type 0
  258. nl80211: Authentication request send successfully
  259. nl80211: Drv Event 19 (NL80211_CMD_NEW_STATION) received for wlp2s0
  260. nl80211: New station 76:0b:b0:7b:dd:5e
  261. nl80211: Drv Event 20 (NL80211_CMD_DEL_STATION) received for wlp2s0
  262. nl80211: Delete station 76:0b:b0:7b:dd:5e
  263. nl80211: Drv Event 37 (NL80211_CMD_AUTHENTICATE) received for wlp2s0
  264. nl80211: MLME event 37; timeout with 76:0b:b0:7b:dd:5e
  265. wlp2s0: Event AUTH_TIMED_OUT (13) received
  266. wlp2s0: SME: Authentication timed out
  267. wlp2s0: Radio work 'sme-connect'@0x560540b53670 done in 0.080353 seconds
  268. wlp2s0: radio_work_free('sme-connect'@0x560540b53670): num_active_works --> 0
  269. Added BSSID 76:0b:b0:7b:dd:5e into ignore list, ignoring for 10 seconds
  270. wlp2s0: Consecutive connection failures: 1 --> request scan in 100 ms
  271. wlp2s0: Setting scan request: 0.100000 sec
  272. nl80211: Data frame filter flags=0x0
  273. wlp2s0: State: AUTHENTICATING -> DISCONNECTED
  274. nl80211: Set wlp2s0 operstate 0->0 (DORMANT)
  275. netlink: Operstate: ifindex=3 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT)
  276. EAPOL: External notification - portEnabled=0
  277. EAPOL: External notification - portValid=0
  278. EAPOL: External notification - EAP success=0
  279. wlp2s0: State: DISCONNECTED -> SCANNING
  280. wlp2s0: Starting AP scan for wildcard SSID
  281. wlp2s0: Add radio work 'scan'@0x560540b53670
  282. wlp2s0: First radio work item in the queue - schedule start immediately
  283. wlp2s0: Starting radio work 'scan'@0x560540b53670 after 0.000016 second wait
  284. wlp2s0: nl80211: scan request
  285. Scan requested (ret=0) - scan timeout 30 seconds
  286. nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp2s0
  287. wlp2s0: nl80211: Scan trigger
  288. wlp2s0: Event SCAN_STARTED (47) received
  289. wlp2s0: Own scan request started a scan in 0.000101 seconds
  290. RTM_NEWLINK: ifi_index=3 ifname=wlp2s0 wext ifi_family=0 ifi_flags=0x1003 ([UP])
  291. nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp2s0
  292. wlp2s0: nl80211: New scan results available
  293. nl80211: Scan probed for SSID ''
  294. nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467 2472 5180 5200 5220 5240 5260 5280 5300 5320 5500 5520 5540 5560 5580 5600 5620 5640 5660 5680 5700 5745 5765 5785 5805 5825
  295. wlp2s0: Event SCAN_RESULTS (3) received
  296. wlp2s0: Scan completed in 3.177509 seconds
  297. nl80211: Received scan results (3 BSSes)
  298. wlp2s0: BSS: Start scan result update 4
  299. BSS: last_scan_res_used=3/32
  300. wlp2s0: New scan results available (own=1 ext=0)
  301. wlp2s0: Radio work 'scan'@0x560540b53670 done in 3.179420 seconds
  302. wlp2s0: radio_work_free('scan'@0x560540b53670): num_active_works --> 0
  303. wlp2s0: Selecting BSS from priority group 0
  304. wlp2s0: 0: 76:0b:b0:7b:dd:5e ssid='Holzklotz' wpa_ie_len=0 rsn_ie_len=20 caps=0x1431 level=-34 freq=2437
  305. wlp2s0:    skip - BSSID ignored (count=1 limit=0)
  306. wlp2s0: 1: 20:b5:c6:00:32:d7 ssid='xdQcUXqJlxnj5OmEBSQHOjt6tfsCO7rl' wpa_ie_len=0 rsn_ie_len=20 caps=0x511 level=-88 freq=5765
  307. wlp2s0:    skip - SSID mismatch
  308. wlp2s0: 2: 00:1e:c0:63:55:10 ssid='XR18-63-55-10' wpa_ie_len=0 rsn_ie_len=0 caps=0x21 level=-74 freq=2412
  309. wlp2s0:    skip - SSID mismatch
  310. wlp2s0: No APs found - clear BSSID ignore list and try again
  311. Removed BSSID 76:0b:b0:7b:dd:5e from ignore list (clear)
  312. wlp2s0: Selecting BSS from priority group 0
  313. wlp2s0: 0: 76:0b:b0:7b:dd:5e ssid='Holzklotz' wpa_ie_len=0 rsn_ie_len=20 caps=0x1431 level=-34 freq=2437
  314. wlp2s0:    selected based on RSN IE
  315. wlp2s0:    selected BSS 76:0b:b0:7b:dd:5e ssid='Holzklotz'
  316. wlp2s0: Considering connect request: reassociate: 0  selected: 76:0b:b0:7b:dd:5e  bssid: 00:00:00:00:00:00  pending: 00:00:00:00:00:00  wpa_state: SCANNING  ssid=0x560540ae3990  current_ssid=(nil)
  317. wlp2s0: Request association with 76:0b:b0:7b:dd:5e
  318. wlp2s0: Re-association to the same ESS
  319. TDLS: TDLS is allowed in the target BSS
  320. TDLS: TDLS channel switch allowed in the target BSS
  321. wlp2s0: No ongoing scan/p2p-scan found to abort
  322. wlp2s0: Add radio work 'sme-connect'@0x560540b53670
  323. wlp2s0: First radio work item in the queue - schedule start immediately
  324. wlp2s0: Starting radio work 'sme-connect'@0x560540b53670 after 0.000033 second wait
  325. wlp2s0: WPA: clearing own WPA/RSN IE
  326. wlp2s0: RSN: clearing own RSNXE
  327. wlp2s0: Automatic auth_alg selection: 0x1
  328. RSN: PMKSA cache search - network_ctx=(nil) try_opportunistic=0 akmp=0x0
  329. RSN: Search for BSSID 76:0b:b0:7b:dd:5e
  330. RSN: No PMKSA cache entry found
  331. wlp2s0: RSN: using IEEE 802.11i/D9.0
  332. wlp2s0: WPA: Selected cipher suites: group 16 pairwise 16 key_mgmt 2 proto 2
  333. wlp2s0: WPA: Selected mgmt group cipher 32
  334. wlp2s0: WPA: clearing AP WPA IE
  335. WPA: set AP RSN IE - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 0c 00
  336. wlp2s0: WPA: clearing AP RSNXE
  337. wlp2s0: WPA: AP group 0x10 network profile group 0x18; available group 0x10
  338. wlp2s0: WPA: using GTK CCMP
  339. wlp2s0: WPA: AP pairwise 0x10 network profile pairwise 0x18; available pairwise 0x10
  340. wlp2s0: WPA: using PTK CCMP
  341. wlp2s0: WPA: AP key_mgmt 0x2 network profile key_mgmt 0x3; available key_mgmt 0x2
  342. wlp2s0: WPA: using KEY_MGMT WPA-PSK
  343. wlp2s0: WPA: AP mgmt_group_cipher 0x20 network profile mgmt_group_cipher 0x0; available mgmt_group_cipher 0x0
  344. wlp2s0: WPA: not using MGMT group cipher
  345. WPA: Set own WPA IE default - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00
  346. RSN: Set own RSNXE default - hexdump(len=0):
  347. WPA: Set PMK based on external data - hexdump(len=32): [REMOVED]
  348. RRM: Determining whether RRM can be used - device support: 0x10
  349. RRM: No RRM in network
  350. Added supported operating classes IE - hexdump(len=19): 3b 11 51 51 53 54 73 74 75 76 77 78 79 7a 7b 7c 7d 7e 7f
  351. EAPOL: External notification - EAP success=0
  352. EAPOL: External notification - EAP fail=0
  353. EAPOL: External notification - portControl=Auto
  354. wlp2s0: Cancelling scan request
  355. wlp2s0: SME: Trying to authenticate with 76:0b:b0:7b:dd:5e (SSID='Holzklotz' freq=2437 MHz)
  356. EAPOL: External notification - portValid=0
  357. wlp2s0: State: SCANNING -> AUTHENTICATING
  358. Not configuring frame filtering - BSS 00:00:00:00:00:00 is not a Hotspot 2.0 network
  359. wlp2s0: Determining shared radio frequencies (max len 1)
  360. wlp2s0: Shared frequencies (len=0): completed iteration
  361. nl80211: Authenticate (ifindex=3)
  362.   * bssid=76:0b:b0:7b:dd:5e
  363.   * freq=2437
  364.   * SSID=Holzklotz
  365.   * IEs - hexdump(len=0): [NULL]
  366.   * Auth Type 0
  367. nl80211: Authentication request send successfully
  368. nl80211: Drv Event 19 (NL80211_CMD_NEW_STATION) received for wlp2s0
  369. nl80211: New station 76:0b:b0:7b:dd:5e
  370. nl80211: Drv Event 37 (NL80211_CMD_AUTHENTICATE) received for wlp2s0
  371. nl80211: Authenticate event
  372. wlp2s0: Event AUTH (10) received
  373. wlp2s0: SME: Authentication response: peer=76:0b:b0:7b:dd:5e auth_type=0 auth_transaction=2 status_code=0
  374. SME: Association Request IEs - hexdump(len=54): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00 7f 0b 00 00 0a 02 01 40 40 40 00 01 20 3b 11 51 51 53 54 73 74 75 76 77 78 79 7a 7b 7c 7d 7e 7f
  375. wlp2s0: Trying to associate with 76:0b:b0:7b:dd:5e (SSID='Holzklotz' freq=2437 MHz)
  376. wlp2s0: State: AUTHENTICATING -> ASSOCIATING
  377. nl80211: Set wlp2s0 operstate 0->0 (DORMANT)
  378. netlink: Operstate: ifindex=3 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT)
  379. WPA: set own WPA/RSN IE - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00
  380. wlp2s0: RSN: clearing own RSNXE
  381. nl80211: Associate (ifindex=3)
  382.   * bssid=76:0b:b0:7b:dd:5e
  383.   * freq=2437
  384.   * SSID=Holzklotz
  385.   * IEs - hexdump(len=54): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00 7f 0b 00 00 0a 02 01 40 40 40 00 01 20 3b 11 51 51 53 54 73 74 75 76 77 78 79 7a 7b 7c 7d 7e 7f
  386.   * WPA Versions 0x2
  387.   * pairwise=0xfac04
  388.   * group=0xfac04
  389.   * akm=0xfac02
  390.   * htcaps - hexdump(len=26): 63 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  391.   * htcaps_mask - hexdump(len=26): 63 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  392.   * vhtcaps - hexdump(len=12): 00 00 00 00 00 00 00 00 00 00 00 00
  393.   * vhtcaps_mask - hexdump(len=12): 00 00 00 00 00 00 00 00 00 00 00 00
  394. nl80211: Association request send successfully
  395. nl80211: Drv Event 38 (NL80211_CMD_ASSOCIATE) received for wlp2s0
  396. nl80211: Associate event
  397. nl80211: Associated on 2437 MHz
  398. nl80211: Associated with 76:0b:b0:7b:dd:5e
  399. nl80211: Set drv->ssid based on scan res info to 'Holzklotz'
  400. wlp2s0: Event ASSOC (0) received
  401. wlp2s0: Association info event
  402. req_ies - hexdump(len=118): 00 09 48 6f 6c 7a 6b 6c 6f 74 7a 01 08 02 04 0b 16 0c 12 18 24 32 04 30 48 60 6c 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00 2d 1a 7e 10 17 ff ff 00 00 00 00 00 00 00 00 2c 01 01 00 00 00 00 00 00 00 00 00 00 7f 0b 00 00 0a 02 01 40 40 40 00 01 20 3b 11 51 51 53 54 73 74 75 76 77 78 79 7a 7b 7c 7d 7e 7f dd 07 00 50 f2 02 00 01 00
  403. resp_ies - hexdump(len=113): 01 08 82 84 8b 96 0c 12 18 24 32 04 30 48 60 6c 2d 1a ad 09 17 ff ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01 00 3d 16 06 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 7f 04 04 00 00 82 dd 18 00 50 f2 02 01 01 81 00 03 a4 00 00 27 a4 00 00 42 43 5e 00 62 32 2f 00 dd 0b 8c fd f0 01 01 02 01 00 02 01 01
  404. wlp2s0: freq=2437 MHz
  405. WPA: set own WPA/RSN IE - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00
  406. wlp2s0: RSN: clearing own RSNXE
  407. wlp2s0: State: ASSOCIATING -> ASSOCIATED
  408. nl80211: Set wlp2s0 operstate 0->0 (DORMANT)
  409. netlink: Operstate: ifindex=3 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT)
  410. wlp2s0: Associated to a new BSS: BSSID=76:0b:b0:7b:dd:5e
  411. wlp2s0: Associated with 76:0b:b0:7b:dd:5e
  412. wlp2s0: WPA: Association event - clear replay counter
  413. wlp2s0: WPA: Clear old PTK
  414. TDLS: Remove peers on association
  415. EAPOL: External notification - portEnabled=0
  416. EAPOL: External notification - portValid=0
  417. EAPOL: External notification - EAP success=0
  418. EAPOL: External notification - portEnabled=1
  419. EAPOL: SUPP_PAE entering state CONNECTING
  420. EAPOL: enable timer tick
  421. EAPOL: SUPP_BE entering state IDLE
  422. wlp2s0: Setting authentication timeout: 10 sec 0 usec
  423. wlp2s0: Cancelling scan request
  424. WMM AC: AC mandatory: AC_BE=0 AC_BK=0 AC_VI=0 AC_VO=0
  425. WMM AC: U-APSD queues=0x0
  426. WMM AC: Valid WMM association, WMM AC is enabled
  427. wlp2s0: CTRL-EVENT-SUBNET-STATUS-UPDATE status=0
  428. RTM_NEWLINK: ifi_index=3 ifname=wlp2s0 wext ifi_family=0 ifi_flags=0x11003 ([UP][LOWER_UP])
  429. RTM_NEWLINK: ifi_index=3 ifname=wlp2s0 wext ifi_family=0 ifi_flags=0x11003 ([UP][LOWER_UP])
  430. RTM_NEWLINK: ifi_index=3 ifname=wlp2s0 wext ifi_family=0 ifi_flags=0x11003 ([UP][LOWER_UP])
  431. RTM_NEWLINK: ifi_index=3 ifname=wlp2s0 operstate=5 linkmode=1 ifi_family=0 ifi_flags=0x11003 ([UP][LOWER_UP])
  432. nl80211: Drv Event 46 (NL80211_CMD_CONNECT) received for wlp2s0
  433. nl80211: Ignore connect event (cmd=46) when using userspace SME
  434. nl80211: Drv Event 36 (NL80211_CMD_REG_CHANGE) received for wlp2s0
  435. nl80211: Regulatory domain change
  436.  * initiator=3
  437.  * type=0
  438.  * alpha2=DE
  439. wlp2s0: Event CHANNEL_LIST_CHANGED (27) received
  440. wlp2s0: CTRL-EVENT-REGDOM-CHANGE init=COUNTRY_IE type=COUNTRY alpha2=DE
  441. wlp2s0: Updating hw mode
  442. nl80211: Regulatory information - country=DE (DFS-ETSI)
  443. nl80211: 2400-2483 @ 40 MHz 20 mBm
  444. nl80211: 5150-5250 @ 80 MHz 23 mBm (no outdoor)
  445. nl80211: 5250-5350 @ 80 MHz 20 mBm (no outdoor) (DFS)
  446. nl80211: 5470-5725 @ 160 MHz 26 mBm (DFS)
  447. nl80211: 5725-5875 @ 80 MHz 13 mBm
  448. nl80211: 5945-6425 @ 160 MHz 23 mBm (no outdoor)
  449. nl80211: 57000-66000 @ 2160 MHz 40 mBm
  450. nl80211: Added 802.11b mode based on 802.11g information
  451. nl80211: Mode IEEE 802.11g: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467[NO_IR] 2472[NO_IR]
  452. nl80211: Mode IEEE 802.11a: 5180[NO_IR] 5200[NO_IR] 5220[NO_IR] 5240[NO_IR] 5260[NO_IR][RADAR] 5280[NO_IR][RADAR] 5300[NO_IR][RADAR] 5320[NO_IR][RADAR] 5500[NO_IR][RADAR] 5520[NO_IR][RADAR] 5540[NO_IR][RADAR]
  453. nl80211: Mode IEEE 802.11b: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467[NO_IR] 2472[NO_IR]
  454. nl80211: BSS Event 129 (NL80211_CMD_CONTROL_PORT_FRAME) received for wlp2s0
  455. wlp2s0: Event EAPOL_RX (23) received
  456. wlp2s0: RX EAPOL from 76:0b:b0:7b:dd:5e
  457. wlp2s0: Setting authentication timeout: 10 sec 0 usec
  458. wlp2s0: IEEE 802.1X RX: version=2 type=3 length=95
  459. wlp2s0:   EAPOL-Key type=2
  460. wlp2s0:   key_info 0x8a (ver=2 keyidx=0 rsvd=0 Pairwise Ack)
  461. wlp2s0:   key_length=16 key_data_length=0
  462.   replay_counter - hexdump(len=8): 00 00 00 00 00 00 00 01
  463.   key_nonce - hexdump(len=32): 5d 87 83 6c 63 8a 32 0f 8b a1 bf a0 57 a4 34 05 cc d7 2c 9f 6e b6 65 22 48 9e 51 73 aa 52 d7 25
  464.   key_iv - hexdump(len=16): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  465.   key_rsc - hexdump(len=8): 00 00 00 00 00 00 00 00
  466.   key_id (reserved) - hexdump(len=8): 00 00 00 00 00 00 00 00
  467.   key_mic - hexdump(len=16): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  468. wlp2s0: State: ASSOCIATED -> 4WAY_HANDSHAKE
  469. wlp2s0: WPA: RX message 1 of 4-Way Handshake from 76:0b:b0:7b:dd:5e (ver=2)
  470. RSN: msg 1/4 key data - hexdump(len=0):
  471. WPA: Renewed SNonce - hexdump(len=32): 6d 55 cc 65 42 40 e1 28 0f 01 4a 5b c3 9e bd e2 a2 a3 f4 d5 a2 37 78 1a d4 fb e9 70 ac 7e 31 0c
  472. WPA: PTK derivation using PRF(SHA1)
  473. WPA: PTK derivation - A1=10:0b:a9:75:ea:f8 A2=76:0b:b0:7b:dd:5e
  474. WPA: Nonce1 - hexdump(len=32): 6d 55 cc 65 42 40 e1 28 0f 01 4a 5b c3 9e bd e2 a2 a3 f4 d5 a2 37 78 1a d4 fb e9 70 ac 7e 31 0c
  475. WPA: Nonce2 - hexdump(len=32): 5d 87 83 6c 63 8a 32 0f 8b a1 bf a0 57 a4 34 05 cc d7 2c 9f 6e b6 65 22 48 9e 51 73 aa 52 d7 25
  476. WPA: PMK - hexdump(len=32): [REMOVED]
  477. WPA: PTK - hexdump(len=48): [REMOVED]
  478. WPA: KCK - hexdump(len=16): [REMOVED]
  479. WPA: KEK - hexdump(len=16): [REMOVED]
  480. WPA: TK - hexdump(len=16): [REMOVED]
  481. WPA: WPA IE for msg 2/4 - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00
  482. WPA: Replay Counter - hexdump(len=8): 00 00 00 00 00 00 00 01
  483. wlp2s0: WPA: Sending EAPOL-Key 2/4
  484. WPA: Send EAPOL-Key frame to 76:0b:b0:7b:dd:5e ver=2 mic_len=16 key_mgmt=0x2
  485. WPA: EAPOL-Key MIC using HMAC-SHA1
  486. WPA: KCK - hexdump(len=16): [REMOVED]
  487. WPA: Derived Key MIC - hexdump(len=16): 44 02 a7 0c a6 a3 f3 0b 4d 05 00 1d 5e 6f 5f ed
  488. nl80211: Send over control port dest=76:0b:b0:7b:dd:5e proto=0x888e len=121 no_encrypt=1
  489. nl80211: tx_control_port cookie=0x1d
  490. nl80211: Drv Event 139 (NL80211_CMD_CONTROL_PORT_FRAME_TX_STATUS) received for wlp2s0
  491. nl80211: Control port TX status (ack=1), cookie=29
  492. wlp2s0: Event EAPOL_TX_STATUS (37) received
  493. nl80211: BSS Event 129 (NL80211_CMD_CONTROL_PORT_FRAME) received for wlp2s0
  494. wlp2s0: Event EAPOL_RX (23) received
  495. wlp2s0: RX EAPOL from 76:0b:b0:7b:dd:5e
  496. wlp2s0: IEEE 802.1X RX: version=2 type=3 length=95
  497. wlp2s0:   EAPOL-Key type=2
  498. wlp2s0:   key_info 0x8a (ver=2 keyidx=0 rsvd=0 Pairwise Ack)
  499. wlp2s0:   key_length=16 key_data_length=0
  500.   replay_counter - hexdump(len=8): 00 00 00 00 00 00 00 02
  501.   key_nonce - hexdump(len=32): 5d 87 83 6c 63 8a 32 0f 8b a1 bf a0 57 a4 34 05 cc d7 2c 9f 6e b6 65 22 48 9e 51 73 aa 52 d7 25
  502.   key_iv - hexdump(len=16): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  503.   key_rsc - hexdump(len=8): 00 00 00 00 00 00 00 00
  504.   key_id (reserved) - hexdump(len=8): 00 00 00 00 00 00 00 00
  505.   key_mic - hexdump(len=16): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  506. wlp2s0: State: 4WAY_HANDSHAKE -> 4WAY_HANDSHAKE
  507. wlp2s0: WPA: RX message 1 of 4-Way Handshake from 76:0b:b0:7b:dd:5e (ver=2)
  508. RSN: msg 1/4 key data - hexdump(len=0):
  509. WPA: PTK derivation using PRF(SHA1)
  510. WPA: PTK derivation - A1=10:0b:a9:75:ea:f8 A2=76:0b:b0:7b:dd:5e
  511. WPA: Nonce1 - hexdump(len=32): 6d 55 cc 65 42 40 e1 28 0f 01 4a 5b c3 9e bd e2 a2 a3 f4 d5 a2 37 78 1a d4 fb e9 70 ac 7e 31 0c
  512. WPA: Nonce2 - hexdump(len=32): 5d 87 83 6c 63 8a 32 0f 8b a1 bf a0 57 a4 34 05 cc d7 2c 9f 6e b6 65 22 48 9e 51 73 aa 52 d7 25
  513. WPA: PMK - hexdump(len=32): [REMOVED]
  514. WPA: PTK - hexdump(len=48): [REMOVED]
  515. WPA: KCK - hexdump(len=16): [REMOVED]
  516. WPA: KEK - hexdump(len=16): [REMOVED]
  517. WPA: TK - hexdump(len=16): [REMOVED]
  518. WPA: WPA IE for msg 2/4 - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00
  519. WPA: Replay Counter - hexdump(len=8): 00 00 00 00 00 00 00 02
  520. wlp2s0: WPA: Sending EAPOL-Key 2/4
  521. WPA: Send EAPOL-Key frame to 76:0b:b0:7b:dd:5e ver=2 mic_len=16 key_mgmt=0x2
  522. WPA: EAPOL-Key MIC using HMAC-SHA1
  523. WPA: KCK - hexdump(len=16): [REMOVED]
  524. WPA: Derived Key MIC - hexdump(len=16): 69 7c 4b df 8e 99 19 44 97 33 cb fc 93 cb ba 67
  525. nl80211: Send over control port dest=76:0b:b0:7b:dd:5e proto=0x888e len=121 no_encrypt=1
  526. nl80211: tx_control_port cookie=0x1e
  527. nl80211: Drv Event 139 (NL80211_CMD_CONTROL_PORT_FRAME_TX_STATUS) received for wlp2s0
  528. nl80211: Control port TX status (ack=1), cookie=30
  529. wlp2s0: Event EAPOL_TX_STATUS (37) received
  530. EAPOL: startWhen --> 0
  531. EAPOL: disable timer tick
  532. EAPOL: SUPP_PAE entering state CONNECTING
  533. EAPOL: enable timer tick
  534. EAPOL: txStart
  535. WPA: drop TX EAPOL in non-IEEE 802.1X mode (type=1 len=0)
  536. nl80211: BSS Event 129 (NL80211_CMD_CONTROL_PORT_FRAME) received for wlp2s0
  537. wlp2s0: Event EAPOL_RX (23) received
  538. wlp2s0: RX EAPOL from 76:0b:b0:7b:dd:5e
  539. wlp2s0: IEEE 802.1X RX: version=2 type=3 length=95
  540. wlp2s0:   EAPOL-Key type=2
  541. wlp2s0:   key_info 0x8a (ver=2 keyidx=0 rsvd=0 Pairwise Ack)
  542. wlp2s0:   key_length=16 key_data_length=0
  543.   replay_counter - hexdump(len=8): 00 00 00 00 00 00 00 03
  544.   key_nonce - hexdump(len=32): 5d 87 83 6c 63 8a 32 0f 8b a1 bf a0 57 a4 34 05 cc d7 2c 9f 6e b6 65 22 48 9e 51 73 aa 52 d7 25
  545.   key_iv - hexdump(len=16): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  546.   key_rsc - hexdump(len=8): 00 00 00 00 00 00 00 00
  547.   key_id (reserved) - hexdump(len=8): 00 00 00 00 00 00 00 00
  548.   key_mic - hexdump(len=16): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  549. wlp2s0: State: 4WAY_HANDSHAKE -> 4WAY_HANDSHAKE
  550. wlp2s0: WPA: RX message 1 of 4-Way Handshake from 76:0b:b0:7b:dd:5e (ver=2)
  551. RSN: msg 1/4 key data - hexdump(len=0):
  552. WPA: PTK derivation using PRF(SHA1)
  553. WPA: PTK derivation - A1=10:0b:a9:75:ea:f8 A2=76:0b:b0:7b:dd:5e
  554. WPA: Nonce1 - hexdump(len=32): 6d 55 cc 65 42 40 e1 28 0f 01 4a 5b c3 9e bd e2 a2 a3 f4 d5 a2 37 78 1a d4 fb e9 70 ac 7e 31 0c
  555. WPA: Nonce2 - hexdump(len=32): 5d 87 83 6c 63 8a 32 0f 8b a1 bf a0 57 a4 34 05 cc d7 2c 9f 6e b6 65 22 48 9e 51 73 aa 52 d7 25
  556. WPA: PMK - hexdump(len=32): [REMOVED]
  557. WPA: PTK - hexdump(len=48): [REMOVED]
  558. WPA: KCK - hexdump(len=16): [REMOVED]
  559. WPA: KEK - hexdump(len=16): [REMOVED]
  560. WPA: TK - hexdump(len=16): [REMOVED]
  561. WPA: WPA IE for msg 2/4 - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00
  562. WPA: Replay Counter - hexdump(len=8): 00 00 00 00 00 00 00 03
  563. wlp2s0: WPA: Sending EAPOL-Key 2/4
  564. WPA: Send EAPOL-Key frame to 76:0b:b0:7b:dd:5e ver=2 mic_len=16 key_mgmt=0x2
  565. WPA: EAPOL-Key MIC using HMAC-SHA1
  566. WPA: KCK - hexdump(len=16): [REMOVED]
  567. WPA: Derived Key MIC - hexdump(len=16): 08 75 40 a7 98 b6 c5 8f 07 88 4b e5 d8 66 1a 9d
  568. nl80211: Send over control port dest=76:0b:b0:7b:dd:5e proto=0x888e len=121 no_encrypt=1
  569. nl80211: tx_control_port cookie=0x1f
  570. nl80211: Drv Event 139 (NL80211_CMD_CONTROL_PORT_FRAME_TX_STATUS) received for wlp2s0
  571. nl80211: Control port TX status (ack=1), cookie=31
  572. wlp2s0: Event EAPOL_TX_STATUS (37) received
  573. nl80211: BSS Event 129 (NL80211_CMD_CONTROL_PORT_FRAME) received for wlp2s0
  574. wlp2s0: Event EAPOL_RX (23) received
  575. wlp2s0: RX EAPOL from 76:0b:b0:7b:dd:5e
  576. wlp2s0: IEEE 802.1X RX: version=2 type=3 length=95
  577. wlp2s0:   EAPOL-Key type=2
  578. wlp2s0:   key_info 0x8a (ver=2 keyidx=0 rsvd=0 Pairwise Ack)
  579. wlp2s0:   key_length=16 key_data_length=0
  580.   replay_counter - hexdump(len=8): 00 00 00 00 00 00 00 04
  581.   key_nonce - hexdump(len=32): 5d 87 83 6c 63 8a 32 0f 8b a1 bf a0 57 a4 34 05 cc d7 2c 9f 6e b6 65 22 48 9e 51 73 aa 52 d7 25
  582.   key_iv - hexdump(len=16): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  583.   key_rsc - hexdump(len=8): 00 00 00 00 00 00 00 00
  584.   key_id (reserved) - hexdump(len=8): 00 00 00 00 00 00 00 00
  585.   key_mic - hexdump(len=16): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  586. wlp2s0: State: 4WAY_HANDSHAKE -> 4WAY_HANDSHAKE
  587. wlp2s0: WPA: RX message 1 of 4-Way Handshake from 76:0b:b0:7b:dd:5e (ver=2)
  588. RSN: msg 1/4 key data - hexdump(len=0):
  589. WPA: PTK derivation using PRF(SHA1)
  590. WPA: PTK derivation - A1=10:0b:a9:75:ea:f8 A2=76:0b:b0:7b:dd:5e
  591. WPA: Nonce1 - hexdump(len=32): 6d 55 cc 65 42 40 e1 28 0f 01 4a 5b c3 9e bd e2 a2 a3 f4 d5 a2 37 78 1a d4 fb e9 70 ac 7e 31 0c
  592. WPA: Nonce2 - hexdump(len=32): 5d 87 83 6c 63 8a 32 0f 8b a1 bf a0 57 a4 34 05 cc d7 2c 9f 6e b6 65 22 48 9e 51 73 aa 52 d7 25
  593. WPA: PMK - hexdump(len=32): [REMOVED]
  594. WPA: PTK - hexdump(len=48): [REMOVED]
  595. WPA: KCK - hexdump(len=16): [REMOVED]
  596. WPA: KEK - hexdump(len=16): [REMOVED]
  597. WPA: TK - hexdump(len=16): [REMOVED]
  598. WPA: WPA IE for msg 2/4 - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00
  599. WPA: Replay Counter - hexdump(len=8): 00 00 00 00 00 00 00 04
  600. wlp2s0: WPA: Sending EAPOL-Key 2/4
  601. WPA: Send EAPOL-Key frame to 76:0b:b0:7b:dd:5e ver=2 mic_len=16 key_mgmt=0x2
  602. WPA: EAPOL-Key MIC using HMAC-SHA1
  603. WPA: KCK - hexdump(len=16): [REMOVED]
  604. WPA: Derived Key MIC - hexdump(len=16): 66 99 cf 73 56 39 bf 65 5b 7f f2 b8 db 48 f1 38
  605. nl80211: Send over control port dest=76:0b:b0:7b:dd:5e proto=0x888e len=121 no_encrypt=1
  606. nl80211: tx_control_port cookie=0x20
  607. nl80211: Drv Event 139 (NL80211_CMD_CONTROL_PORT_FRAME_TX_STATUS) received for wlp2s0
  608. nl80211: Control port TX status (ack=1), cookie=32
  609. wlp2s0: Event EAPOL_TX_STATUS (37) received
  610. RTM_NEWLINK: ifi_index=3 ifname=wlp2s0 operstate=2 linkmode=1 ifi_family=0 ifi_flags=0x1003 ([UP])
  611. nl80211: Drv Event 20 (NL80211_CMD_DEL_STATION) received for wlp2s0
  612. nl80211: Delete station 76:0b:b0:7b:dd:5e
  613. nl80211: Drv Event 40 (NL80211_CMD_DISASSOCIATE) received for wlp2s0
  614. nl80211: Disassociate event
  615. wlp2s0: Event DISASSOC (1) received
  616. wlp2s0: Disassociation notification
  617. wlp2s0:  * reason 15 (4WAY_HANDSHAKE_TIMEOUT)
  618. wlp2s0:  * address 76:0b:b0:7b:dd:5e
  619. Disassociation frame IE(s) - hexdump(len=0): [NULL]
  620. wlp2s0: SME: Disassociation event received
  621. wlp2s0: SME: Deauthenticate to clear driver state
  622. wpa_driver_nl80211_deauthenticate(addr=76:0b:b0:7b:dd:5e reason_code=3)
  623. wlp2s0: nl80211: MLME command failed: reason=3 ret=-107 (Transport endpoint is not connected)
  624. wlp2s0: CTRL-EVENT-DISCONNECTED bssid=76:0b:b0:7b:dd:5e reason=15
  625. wlp2s0: WPA: 4-Way Handshake failed - pre-shared key may be incorrect
  626. wlp2s0: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="Holzklotz" auth_failures=1 duration=10 reason=WRONG_KEY
  627. wlp2s0: Auto connect enabled: try to reconnect (wps=0/0 wpa_state=7)
  628. wlp2s0: Setting scan request: 0.100000 sec
  629. wlp2s0: Radio work 'sme-connect'@0x560540b53670 done in 4.261151 seconds
  630. wlp2s0: radio_work_free('sme-connect'@0x560540b53670): num_active_works --> 0
  631. Added BSSID 76:0b:b0:7b:dd:5e into ignore list, ignoring for 10 seconds
  632. wlp2s0: Consecutive connection failures: 2 --> request scan in 500 ms
  633. wlp2s0: Ignore new scan request for 0.500000 sec since an earlier request is scheduled to trigger sooner
  634. TDLS: Remove peers on disassociation
  635. wlp2s0: WPA: Clear old PMK and PTK
  636. wlp2s0: Disconnect event - remove keys
  637. nl80211: Data frame filter flags=0x0
  638. wlp2s0: State: 4WAY_HANDSHAKE -> DISCONNECTED
  639. nl80211: Set wlp2s0 operstate 0->0 (DORMANT)
  640. netlink: Operstate: ifindex=3 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT)
  641. WMM AC: WMM AC is disabled
  642. EAPOL: External notification - portEnabled=0
  643. EAPOL: SUPP_PAE entering state DISCONNECTED
  644. EAPOL: Supplicant port status: Unauthorized
  645. nl80211: Skip set_supp_port(unauthorized) while not associated
  646. EAPOL: SUPP_BE entering state INITIALIZE
  647. EAPOL: External notification - portValid=0
  648. EAPOL: External notification - EAP success=0
  649. RTM_NEWLINK: ifi_index=3 ifname=wlp2s0 wext ifi_family=0 ifi_flags=0x1003 ([UP])
  650. nl80211: Drv Event 48 (NL80211_CMD_DISCONNECT) received for wlp2s0
  651. nl80211: Ignore disconnect event when using userspace SME
  652. nl80211: Drv Event 36 (NL80211_CMD_REG_CHANGE) received for wlp2s0
  653. nl80211: Regulatory domain change
  654.  * initiator=0
  655.  * type=1
  656. wlp2s0: Event CHANNEL_LIST_CHANGED (27) received
  657. wlp2s0: CTRL-EVENT-REGDOM-CHANGE init=CORE type=WORLD
  658. wlp2s0: Updating hw mode
  659. nl80211: Regulatory information - country=00
  660. nl80211: 2402-2472 @ 40 MHz 20 mBm
  661. nl80211: 2457-2482 @ 20 MHz 20 mBm (no IR)
  662. nl80211: 2474-2494 @ 20 MHz 20 mBm (no OFDM) (no IR)
  663. nl80211: 5170-5250 @ 80 MHz 20 mBm (no IR)
  664. nl80211: 5250-5330 @ 80 MHz 20 mBm (DFS) (no IR)
  665. nl80211: 5490-5730 @ 160 MHz 20 mBm (DFS) (no IR)
  666. nl80211: 5735-5835 @ 80 MHz 20 mBm (no IR)
  667. nl80211: 57240-63720 @ 2160 MHz 0 mBm
  668. nl80211: Added 802.11b mode based on 802.11g information
  669. nl80211: Mode IEEE 802.11g: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467[NO_IR] 2472[NO_IR]
  670. nl80211: Mode IEEE 802.11a: 5180[NO_IR] 5200[NO_IR] 5220[NO_IR] 5240[NO_IR] 5260[NO_IR][RADAR] 5280[NO_IR][RADAR] 5300[NO_IR][RADAR] 5320[NO_IR][RADAR] 5500[NO_IR][RADAR] 5520[NO_IR][RADAR] 5540[NO_IR][RADAR]
  671. nl80211: Mode IEEE 802.11b: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467[NO_IR] 2472[NO_IR]
  672. wlp2s0: State: DISCONNECTED -> SCANNING
  673. wlp2s0: Starting AP scan for wildcard SSID
  674. wlp2s0: Add radio work 'scan'@0x560540b53670
  675. wlp2s0: First radio work item in the queue - schedule start immediately
  676. wlp2s0: Starting radio work 'scan'@0x560540b53670 after 0.000014 second wait
  677. wlp2s0: nl80211: scan request
  678. Scan requested (ret=0) - scan timeout 30 seconds
  679. nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp2s0
  680. wlp2s0: nl80211: Scan trigger
  681. wlp2s0: Event SCAN_STARTED (47) received
  682. wlp2s0: Own scan request started a scan in 0.000106 seconds
  683. RTM_NEWLINK: ifi_index=3 ifname=wlp2s0 wext ifi_family=0 ifi_flags=0x1003 ([UP])
  684. nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp2s0
  685. wlp2s0: nl80211: New scan results available
  686. nl80211: Scan probed for SSID ''
  687. nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467 2472 5180 5200 5220 5240 5260 5280 5300 5320 5500 5520 5540 5560 5580 5600 5620 5640 5660 5680 5700 5745 5765 5785 5805 5825
  688. wlp2s0: Event SCAN_RESULTS (3) received
  689. wlp2s0: Scan completed in 3.159852 seconds
  690. nl80211: Received scan results (3 BSSes)
  691. wlp2s0: BSS: Start scan result update 5
  692. BSS: last_scan_res_used=3/32
  693. wlp2s0: New scan results available (own=1 ext=0)
  694. wlp2s0: Radio work 'scan'@0x560540b53670 done in 3.161750 seconds
  695. wlp2s0: radio_work_free('scan'@0x560540b53670): num_active_works --> 0
  696. wlp2s0: Postpone network selection by 7 seconds since all networks are disabled
  697. wlp2s0: Try to associate due to network getting re-enabled
  698. Fast associate: Old scan results
  699. wlp2s0: Setting scan request: 0.000000 sec
  700. wlp2s0: Starting AP scan for wildcard SSID
  701. wlp2s0: Add radio work 'scan'@0x560540b53670
  702. wlp2s0: First radio work item in the queue - schedule start immediately
  703. wlp2s0: Starting radio work 'scan'@0x560540b53670 after 0.000037 second wait
  704. wlp2s0: nl80211: scan request
  705. Scan requested (ret=0) - scan timeout 30 seconds
  706. nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp2s0
  707. wlp2s0: nl80211: Scan trigger
  708. wlp2s0: Event SCAN_STARTED (47) received
  709. wlp2s0: Own scan request started a scan in 0.000135 seconds
  710. RTM_NEWLINK: ifi_index=3 ifname=wlp2s0 wext ifi_family=0 ifi_flags=0x1003 ([UP])
  711. nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp2s0
  712. wlp2s0: nl80211: New scan results available
  713. nl80211: Scan probed for SSID ''
  714. nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467 2472 5180 5200 5220 5240 5260 5280 5300 5320 5500 5520 5540 5560 5580 5600 5620 5640 5660 5680 5700 5745 5765 5785 5805 5825
  715. wlp2s0: Event SCAN_RESULTS (3) received
  716. wlp2s0: Scan completed in 3.153145 seconds
  717. nl80211: Received scan results (4 BSSes)
  718. wlp2s0: BSS: Start scan result update 6
  719. wlp2s0: BSS: Add new id 3 BSSID 70:97:41:a3:1e:be SSID 'MagentaWLAN-3SJX' freq 2412
  720. BSS: last_scan_res_used=4/32
  721. wlp2s0: New scan results available (own=1 ext=0)
  722. WPS: AP 70:97:41:a3:1e:be type 0 added
  723. WPS: AP[0] 70:97:41:a3:1e:be type=0 tries=0 last_attempt=-1 sec ago bssid_ignore=0
  724. wlp2s0: Radio work 'scan'@0x560540b53670 done in 3.155390 seconds
  725. wlp2s0: radio_work_free('scan'@0x560540b53670): num_active_works --> 0
  726. wlp2s0: CTRL-EVENT-SSID-REENABLED id=0 ssid="Holzklotz"
  727. wlp2s0: Selecting BSS from priority group 0
  728. wlp2s0: 0: 76:0b:b0:7b:dd:5e ssid='Holzklotz' wpa_ie_len=0 rsn_ie_len=20 caps=0x1431 level=-33 freq=2437
  729. wlp2s0:    selected based on RSN IE
  730. wlp2s0:    selected BSS 76:0b:b0:7b:dd:5e ssid='Holzklotz'
  731. wlp2s0: Considering connect request: reassociate: 0  selected: 76:0b:b0:7b:dd:5e  bssid: 00:00:00:00:00:00  pending: 00:00:00:00:00:00  wpa_state: SCANNING  ssid=0x560540ae3990  current_ssid=(nil)
  732. wlp2s0: Request association with 76:0b:b0:7b:dd:5e
  733. wlp2s0: Re-association to the same ESS
  734. TDLS: TDLS is allowed in the target BSS
  735. TDLS: TDLS channel switch allowed in the target BSS
  736. wlp2s0: No ongoing scan/p2p-scan found to abort
  737. wlp2s0: Add radio work 'sme-connect'@0x560540b53670
  738. wlp2s0: First radio work item in the queue - schedule start immediately
  739. wlp2s0: Starting radio work 'sme-connect'@0x560540b53670 after 0.000049 second wait
  740. wlp2s0: WPA: clearing own WPA/RSN IE
  741. wlp2s0: RSN: clearing own RSNXE
  742. wlp2s0: Automatic auth_alg selection: 0x1
  743. RSN: PMKSA cache search - network_ctx=(nil) try_opportunistic=0 akmp=0x0
  744. RSN: Search for BSSID 76:0b:b0:7b:dd:5e
  745. RSN: No PMKSA cache entry found
  746. wlp2s0: RSN: using IEEE 802.11i/D9.0
  747. wlp2s0: WPA: Selected cipher suites: group 16 pairwise 16 key_mgmt 2 proto 2
  748. wlp2s0: WPA: Selected mgmt group cipher 32
  749. wlp2s0: WPA: clearing AP WPA IE
  750. WPA: set AP RSN IE - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 0c 00
  751. wlp2s0: WPA: clearing AP RSNXE
  752. wlp2s0: WPA: AP group 0x10 network profile group 0x18; available group 0x10
  753. wlp2s0: WPA: using GTK CCMP
  754. wlp2s0: WPA: AP pairwise 0x10 network profile pairwise 0x18; available pairwise 0x10
  755. wlp2s0: WPA: using PTK CCMP
  756. wlp2s0: WPA: AP key_mgmt 0x2 network profile key_mgmt 0x3; available key_mgmt 0x2
  757. wlp2s0: WPA: using KEY_MGMT WPA-PSK
  758. wlp2s0: WPA: AP mgmt_group_cipher 0x20 network profile mgmt_group_cipher 0x0; available mgmt_group_cipher 0x0
  759. wlp2s0: WPA: not using MGMT group cipher
  760. WPA: Set own WPA IE default - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00
  761. RSN: Set own RSNXE default - hexdump(len=0):
  762. WPA: Set PMK based on external data - hexdump(len=32): [REMOVED]
  763. RRM: Determining whether RRM can be used - device support: 0x10
  764. RRM: No RRM in network
  765. Added supported operating classes IE - hexdump(len=19): 3b 11 51 51 53 54 73 74 75 76 77 78 79 7a 7b 7c 7d 7e 7f
  766. EAPOL: External notification - EAP success=0
  767. EAPOL: External notification - EAP fail=0
  768. EAPOL: External notification - portControl=Auto
  769. wlp2s0: Cancelling scan request
  770. wlp2s0: SME: Trying to authenticate with 76:0b:b0:7b:dd:5e (SSID='Holzklotz' freq=2437 MHz)
  771. EAPOL: External notification - portValid=0
  772. wlp2s0: State: SCANNING -> AUTHENTICATING
  773. Not configuring frame filtering - BSS 00:00:00:00:00:00 is not a Hotspot 2.0 network
  774. wlp2s0: Determining shared radio frequencies (max len 1)
  775. wlp2s0: Shared frequencies (len=0): completed iteration
  776. nl80211: Authenticate (ifindex=3)
  777. wlp2s0: CTRL-EVENT-TERMINATING

Quellcode

Hier kannst du den Code kopieren und ihn in deinen bevorzugten Editor einfügen. PASTEBIN_DOWNLOAD_SNIPPET_EXPLAIN

Verlinken

URL: alles markieren
https://nopaste.debianforum.de/41967

BBCode: alles markieren
[NP]41967[/NP]

LATEST_SNIPPETS