NoPaste

hdparm

von minimike

SNIPPET_TEXT:
  1. === START OF INFORMATION SECTION ===
  2. Model Family:     Seagate Barracuda 2.5 5400
  3. Device Model:     ST5000LM000-2AN170
  4. Serial Number:    WCJ7HQHN
  5. LU WWN Device Id: 5 000c50 0eda1cbf7
  6. Firmware Version: 0001
  7. User Capacity:    5,000,981,078,016 bytes [5.00 TB]
  8. Sector Sizes:     512 bytes logical, 4096 bytes physical
  9. Rotation Rate:    5526 rpm
  10. Form Factor:      2.5 inches
  11. Device is:        In smartctl database [for details use: -P show]
  12. ATA Version is:   ACS-3 T13/2161-D revision 5
  13. SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
  14. Local Time is:    Fri Sep 29 14:55:40 2023 CEST
  15. SMART support is: Available - device has SMART capability.
  16. SMART support is: Enabled
  17.  
  18. === START OF READ SMART DATA SECTION ===
  19. SMART overall-health self-assessment test result: PASSED
  20. See vendor-specific Attribute list for marginal Attributes.
  21.  
  22. General SMART Values:
  23. Offline data collection status:  (0x00) Offline data collection activity
  24.                                         was never started.
  25.                                         Auto Offline Data Collection: Disabled.
  26. Self-test execution status:      (   0) The previous self-test routine completed
  27.                                         without error or no self-test has ever
  28.                                         been run.
  29. Total time to complete Offline
  30. data collection:                (    0) seconds.
  31. Offline data collection
  32. capabilities:                    (0x73) SMART execute Offline immediate.
  33.                                         Auto Offline data collection on/off support.
  34.                                         Suspend Offline collection upon new
  35.                                         command.
  36.                                         No Offline surface scan supported.
  37.                                         Self-test supported.
  38.                                         Conveyance Self-test supported.
  39.                                         Selective Self-test supported.
  40. SMART capabilities:            (0x0003) Saves SMART data before entering
  41.                                         power-saving mode.
  42.                                         Supports SMART auto save timer.
  43. Error logging capability:        (0x01) Error logging supported.
  44. ...skipping...
  45. Device is:        In smartctl database [for details use: -P show]
  46. ATA Version is:   ACS-3 T13/2161-D revision 5
  47. SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
  48. Local Time is:    Fri Sep 29 14:55:53 2023 CEST
  49. SMART support is: Available - device has SMART capability.
  50. SMART support is: Enabled
  51.  
  52. === START OF READ SMART DATA SECTION ===
  53. SMART overall-health self-assessment test result: PASSED
  54. See vendor-specific Attribute list for marginal Attributes.
  55.  
  56. General SMART Values:
  57. Offline data collection status:  (0x00) Offline data collection activity
  58.                                         was never started.
  59.                                         Auto Offline Data Collection: Disabled.
  60. Self-test execution status:      (   0) The previous self-test routine completed
  61.                                         without error or no self-test has ever
  62.                                         been run.
  63. Total time to complete Offline
  64. data collection:                (    0) seconds.
  65. Offline data collection
  66. capabilities:                    (0x73) SMART execute Offline immediate.
  67.                                         Auto Offline data collection on/off support.
  68.                                         Suspend Offline collection upon new
  69.                                         command.
  70.                                         No Offline surface scan supported.
  71.                                         Self-test supported.
  72.                                         Conveyance Self-test supported.
  73.                                         Selective Self-test supported.
  74. SMART capabilities:            (0x0003) Saves SMART data before entering
  75.                                         power-saving mode.
  76.                                         Supports SMART auto save timer.
  77. Error logging capability:        (0x01) Error logging supported.
  78.                                         General Purpose Logging supported.
  79. Short self-test routine
  80. recommended polling time:        (   1) minutes.
  81. Extended self-test routine
  82. recommended polling time:        ( 807) minutes.
  83. Conveyance self-test routine
  84. recommended polling time:        (   2) minutes.
  85. SCT capabilities:              (0x30a5) SCT Status supported.
  86.                                         SCT Data Table supported.
  87.  
  88. SMART Attributes Data Structure revision number: 10
  89. Vendor Specific SMART Attributes with Thresholds:
  90. ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  91.   1 Raw_Read_Error_Rate     0x000f   082   064   006    Pre-fail  Always       -       154957834
  92. ...skipping...
  93. ATA Error Count: 1
  94.         CR = Command Register [HEX]
  95.         FR = Features Register [HEX]
  96.         SC = Sector Count Register [HEX]
  97.         SN = Sector Number Register [HEX]
  98.         CL = Cylinder Low Register [HEX]
  99.         CH = Cylinder High Register [HEX]
  100.         DH = Device/Head Register [HEX]
  101.         DC = Device Command Register [HEX]
  102.         ER = Error register [HEX]
  103.         ST = Status register [HEX]
  104. Powered_Up_Time is measured from power on, and printed as
  105. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  106. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  107.  
  108. Error 1 occurred at disk power-on lifetime: 346 hours (14 days + 10 hours)
  109.   When the command that caused the error occurred, the device was active or idle.
  110.  
  111.   After command completion occurred, registers were:
  112.   ER ST SC SN CL CH DH
  113.   -- -- -- -- -- -- --
  114.   40 51 00 78 46 da 00  Error: UNC at LBA = 0x00da4678 = 14304888
  115.  
  116.   Commands leading to the command that caused the error were:
  117.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  118.   -- -- -- -- -- -- -- --  ----------------  --------------------
  119.   25 00 08 78 46 da 40 00      00:01:11.239  READ DMA EXT
  120.   35 00 08 f0 41 da 40 00      00:01:11.230  WRITE DMA EXT
  121.   35 00 40 a0 40 da 40 00      00:01:11.227  WRITE DMA EXT
  122.   35 00 08 98 40 da 40 00      00:01:11.226  WRITE DMA EXT
  123.   35 00 08 90 40 da 40 00      00:01:11.226  WRITE DMA EXT
  124.  
  125. SMART Self-test log structure revision number 1
  126. No self-tests have been logged.  [To run self-tests, use: smartctl -t]
  127.  
  128. SMART Selective self-test log data structure revision number 1
  129.  SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
  130.     1        0        0  Not_testing
  131.     2        0        0  Not_testing
  132.     3        0        0  Not_testing
  133.     4        0        0  Not_testing
  134.     5        0        0  Not_testing
  135. Selective self-test flags (0x0):
  136.   After scanning selected spans, do NOT read-scan remainder of disk.
  137. If Selective self-test is pending on power-up, resume after 0 minute delay.

Quellcode

Hier kannst du den Code kopieren und ihn in deinen bevorzugten Editor einfügen. PASTEBIN_DOWNLOAD_SNIPPET_EXPLAIN

Verlinken

URL: alles markieren
https://nopaste.debianforum.de/41976

BBCode: alles markieren
[NP]41976[/NP]

LATEST_SNIPPETS