NoPaste

dmesg-6.1.74dm1.1

von fischig

SNIPPET_TEXT:
  1. [    0.000000] Linux version 6.1.74dm1.1 (root@router) (gcc (Debian 8.3.0-6) 8.3.0, GNU ld (GNU Binutils for Debian) 2.31.1) #6.1.74 SMP PREEMPT_DYNAMIC Mon Jan 22 20:05:27 CET 2024
  2. [    0.000000] Command line: auto BOOT_IMAGE=linux-6174 ro root=807 net.ifnames=0
  3. [    0.000000] BIOS-provided physical RAM map:
  4. [    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
  5. [    0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
  6. [    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
  7. [    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000df9befff] usable
  8. [    0.000000] BIOS-e820: [mem 0x00000000df9bf000-0x00000000dfabefff] reserved
  9. [    0.000000] BIOS-e820: [mem 0x00000000dfabf000-0x00000000dfbbefff] ACPI NVS
  10. [    0.000000] BIOS-e820: [mem 0x00000000dfbbf000-0x00000000dfbfefff] ACPI data
  11. [    0.000000] BIOS-e820: [mem 0x00000000dfbff000-0x00000000dfbfffff] usable
  12. [    0.000000] BIOS-e820: [mem 0x00000000dfc00000-0x00000000dfffffff] reserved
  13. [    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
  14. [    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
  15. [    0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
  16. [    0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed80fff] reserved
  17. [    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
  18. [    0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
  19. [    0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000106ffffff] usable
  20. [    0.000000] BIOS-e820: [mem 0x0000000107000000-0x000000011effffff] reserved
  21. [    0.000000] NX (Execute Disable) protection: active
  22. [    0.000000] SMBIOS 2.7 present.
  23. [    0.000000] DMI: Hewlett-Packard HP Pavilion dm1 Notebook PC/18D4, BIOS F.02 04/12/2012
  24. [    0.000000] tsc: Fast TSC calibration using PIT
  25. [    0.000000] tsc: Detected 1397.506 MHz processor
  26. [    0.008519] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
  27. [    0.008530] e820: remove [mem 0x000a0000-0x000fffff] usable
  28. [    0.008553] last_pfn = 0x107000 max_arch_pfn = 0x400000000
  29. [    0.008724] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
  30. [    0.008946] last_pfn = 0xdfc00 max_arch_pfn = 0x400000000
  31. [    0.023001] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf]
  32. [    0.023060] Using GB pages for direct mapping
  33. [    0.024439] ACPI: Early table checksum verification disabled
  34. [    0.024450] ACPI: RSDP 0x00000000000FE020 000024 (v02 HPQOEM)
  35. [    0.024465] ACPI: XSDT 0x00000000DFBFE120 00008C (v01 HPQOEM SLIC-MPC 00000001      01000013)
  36. [    0.024483] ACPI: FACP 0x00000000DFBFC000 00010C (v05 HPQOEM SLIC-MPC 00000001 HP   00040000)
  37. [    0.024501] ACPI: DSDT 0x00000000DFBEA000 00DF2F (v01 HPQOEM INSYDE   F0000000 ACPI 00040000)
  38. [    0.024514] ACPI: FACS 0x00000000DFB8B000 000040
  39. [    0.024523] ACPI: UEFI 0x00000000DFBFD000 000236 (v01 HPQOEM INSYDE   00000001 HP   00040000)
  40. [    0.024535] ACPI: HPET 0x00000000DFBFB000 000038 (v01 HPQOEM INSYDE   00000001 HP   00040000)
  41. [    0.024546] ACPI: APIC 0x00000000DFBFA000 000084 (v03 HPQOEM INSYDE   00000001 HP   00040000)
  42. [    0.024557] ACPI: MCFG 0x00000000DFBF9000 00003C (v01 HPQOEM INSYDE   00000001 HP   00040000)
  43. [    0.024568] ACPI: ASF! 0x00000000DFBF8000 0000A5 (v32 HPQOEM INSYDE   00000001 HP   00040000)
  44. [    0.024580] ACPI: BOOT 0x00000000DFBE9000 000028 (v01 HPQOEM INSYDE   00000001 HP   00040000)
  45. [    0.024591] ACPI: SLIC 0x00000000DFBE8000 000176 (v01 HPQOEM SLIC-MPC 00000001 HP   00040000)
  46. [    0.024603] ACPI: WDRT 0x00000000DFBE7000 000047 (v01 HPQOEM INSYDE   00000000 HP   00040000)
  47. [    0.024614] ACPI: WDAT 0x00000000DFBE6000 0001AC (v01 HPQOEM INSYDE   00000001 HP   00040000)
  48. [    0.024625] ACPI: FPDT 0x00000000DFBE4000 000044 (v01 HPQOEM INSYDE   00000001 HP   00040000)
  49. [    0.024636] ACPI: SSDT 0x00000000DFBE3000 0003DE (v01 HPQOEM INSYDE   00000001 AMD  00000001)
  50. [    0.024647] ACPI: SSDT 0x00000000DFBE1000 0016CF (v02 HPQOEM INSYDE   00000001 MSFT 04000000)
  51. [    0.024657] ACPI: Reserving FACP table memory at [mem 0xdfbfc000-0xdfbfc10b]
  52. [    0.024661] ACPI: Reserving DSDT table memory at [mem 0xdfbea000-0xdfbf7f2e]
  53. [    0.024665] ACPI: Reserving FACS table memory at [mem 0xdfb8b000-0xdfb8b03f]
  54. [    0.024669] ACPI: Reserving UEFI table memory at [mem 0xdfbfd000-0xdfbfd235]
  55. [    0.024673] ACPI: Reserving HPET table memory at [mem 0xdfbfb000-0xdfbfb037]
  56. [    0.024677] ACPI: Reserving APIC table memory at [mem 0xdfbfa000-0xdfbfa083]
  57. [    0.024680] ACPI: Reserving MCFG table memory at [mem 0xdfbf9000-0xdfbf903b]
  58. [    0.024684] ACPI: Reserving ASF! table memory at [mem 0xdfbf8000-0xdfbf80a4]
  59. [    0.024687] ACPI: Reserving BOOT table memory at [mem 0xdfbe9000-0xdfbe9027]
  60. [    0.024691] ACPI: Reserving SLIC table memory at [mem 0xdfbe8000-0xdfbe8175]
  61. [    0.024694] ACPI: Reserving WDRT table memory at [mem 0xdfbe7000-0xdfbe7046]
  62. [    0.024697] ACPI: Reserving WDAT table memory at [mem 0xdfbe6000-0xdfbe61ab]
  63. [    0.024701] ACPI: Reserving FPDT table memory at [mem 0xdfbe4000-0xdfbe4043]
  64. [    0.024704] ACPI: Reserving SSDT table memory at [mem 0xdfbe3000-0xdfbe33dd]
  65. [    0.024708] ACPI: Reserving SSDT table memory at [mem 0xdfbe1000-0xdfbe26ce]
  66. [    0.025114] No NUMA configuration found
  67. [    0.025118] Faking a node at [mem 0x0000000000000000-0x0000000106ffffff]
  68. [    0.025131] NODE_DATA(0) allocated [mem 0x106ffb000-0x106ffffff]
  69. [    0.025222] Zone ranges:
  70. [    0.025224]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
  71. [    0.025230]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
  72. [    0.025235]   Normal   [mem 0x0000000100000000-0x0000000106ffffff]
  73. [    0.025240]   Device   empty
  74. [    0.025243] Movable zone start for each node
  75. [    0.025246] Early memory node ranges
  76. [    0.025247]   node   0: [mem 0x0000000000001000-0x000000000009efff]
  77. [    0.025252]   node   0: [mem 0x0000000000100000-0x00000000df9befff]
  78. [    0.025257]   node   0: [mem 0x00000000dfbff000-0x00000000dfbfffff]
  79. [    0.025260]   node   0: [mem 0x0000000100000000-0x0000000106ffffff]
  80. [    0.025265] Initmem setup node 0 [mem 0x0000000000001000-0x0000000106ffffff]
  81. [    0.025283] On node 0, zone DMA: 1 pages in unavailable ranges
  82. [    0.025426] On node 0, zone DMA: 97 pages in unavailable ranges
  83. [    0.059390] On node 0, zone DMA32: 576 pages in unavailable ranges
  84. [    0.060517] On node 0, zone Normal: 1024 pages in unavailable ranges
  85. [    0.060708] On node 0, zone Normal: 4096 pages in unavailable ranges
  86. [    0.060994] ACPI: PM-Timer IO Port: 0x408
  87. [    0.061015] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
  88. [    0.061021] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
  89. [    0.061025] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
  90. [    0.061029] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
  91. [    0.061067] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
  92. [    0.061076] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
  93. [    0.061083] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
  94. [    0.061096] ACPI: Using ACPI (MADT) for SMP configuration information
  95. [    0.061101] ACPI: HPET id: 0x10228210 base: 0xfed00000
  96. [    0.061116] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
  97. [    0.061171] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
  98. [    0.061179] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
  99. [    0.061183] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff]
  100. [    0.061186] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff]
  101. [    0.061192] PM: hibernation: Registered nosave memory: [mem 0xdf9bf000-0xdfabefff]
  102. [    0.061195] PM: hibernation: Registered nosave memory: [mem 0xdfabf000-0xdfbbefff]
  103. [    0.061198] PM: hibernation: Registered nosave memory: [mem 0xdfbbf000-0xdfbfefff]
  104. [    0.061204] PM: hibernation: Registered nosave memory: [mem 0xdfc00000-0xdfffffff]
  105. [    0.061208] PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
  106. [    0.061211] PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
  107. [    0.061214] PM: hibernation: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
  108. [    0.061217] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
  109. [    0.061220] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
  110. [    0.061223] PM: hibernation: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
  111. [    0.061226] PM: hibernation: Registered nosave memory: [mem 0xfec11000-0xfed7ffff]
  112. [    0.061229] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfed80fff]
  113. [    0.061232] PM: hibernation: Registered nosave memory: [mem 0xfed81000-0xfedfffff]
  114. [    0.061235] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
  115. [    0.061238] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xffbfffff]
  116. [    0.061241] PM: hibernation: Registered nosave memory: [mem 0xffc00000-0xffffffff]
  117. [    0.061247] [mem 0xe0000000-0xf7ffffff] available for PCI devices
  118. [    0.061251] Booting paravirtualized kernel on bare hardware
  119. [    0.061258] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
  120. [    0.077606] setup_percpu: NR_CPUS:512 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
  121. [    0.079274] percpu: Embedded 57 pages/cpu s193256 r8192 d32024 u524288
  122. [    0.079301] pcpu-alloc: s193256 r8192 d32024 u524288 alloc=1*2097152
  123. [    0.079312] pcpu-alloc: [0] 0 1 2 3
  124. [    0.079392] Fallback order for Node 0: 0
  125. [    0.079404] Built 1 zonelists, mobility grouping on.  Total pages: 929561
  126. [    0.079410] Policy zone: Normal
  127. [    0.079414] Kernel command line: auto BOOT_IMAGE=linux-6174 ro root=807 net.ifnames=0
  128. [    0.079637] Unknown kernel command line parameters "auto BOOT_IMAGE=linux-6174", will be passed to user space.
  129. [    0.081863] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
  130. [    0.083005] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
  131. [    0.083087] mem auto-init: stack:off, heap alloc:off, heap free:off
  132. [    0.083103] software IO TLB: area num 4.
  133. [    0.203372] Memory: 3601120K/3777912K available (18446K kernel code, 2782K rwdata, 6632K rodata, 2208K init, 3644K bss, 176532K reserved, 0K cma-reserved)
  134. [    0.204426] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  135. [    0.204538] ftrace: allocating 55356 entries in 217 pages
  136. [    0.222798] ftrace: allocated 217 pages with 5 groups
  137. [    0.224806] Dynamic Preempt: voluntary
  138. [    0.224978] rcu: Preemptible hierarchical RCU implementation.
  139. [    0.224981] rcu:     RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
  140. [    0.224989]  Trampoline variant of Tasks RCU enabled.
  141. [    0.224990]  Rude variant of Tasks RCU enabled.
  142. [    0.224992]  Tracing variant of Tasks RCU enabled.
  143. [    0.224995] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
  144. [    0.224998] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
  145. [    0.244794] NR_IRQS: 33024, nr_irqs: 456, preallocated irqs: 16
  146. [    0.245151] rcu: srcu_init: Setting srcu_struct sizes based on contention.
  147. [    0.246769] Console: colour VGA+ 80x25
  148. [    0.255665] printk: console [tty0] enabled
  149. [    0.255812] ACPI: Core revision 20220331
  150. [    0.256325] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
  151. [    0.256430] APIC: Switch to symmetric I/O mode setup
  152. [    0.256867] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
  153. [    0.276494] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1424ec5389f, max_idle_ns: 440795225913 ns
  154. [    0.276587] Calibrating delay loop (skipped), value calculated using timer frequency.. 2795.01 BogoMIPS (lpj=5590024)
  155. [    0.276720] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
  156. [    0.276818] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0
  157. [    0.276886] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
  158. [    0.276960] Spectre V2 : Mitigation: Retpolines
  159. [    0.277017] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
  160. [    0.277088] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
  161. [    0.277148] Speculative Store Bypass: Vulnerable
  162. [    0.277213] x86/fpu: x87 FPU will use FXSAVE
  163. [    0.316388] Freeing SMP alternatives memory: 48K
  164. [    0.316585] pid_max: default: 32768 minimum: 301
  165. [    0.316887] LSM: Security Framework initializing
  166. [    0.317031] Yama: becoming mindful.
  167. [    0.317218] AppArmor: AppArmor initialized
  168. [    0.317315] TOMOYO Linux initialized
  169. [    0.317556] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
  170. [    0.317734] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
  171. [    0.432482] smpboot: CPU0: AMD E1-1200 APU with Radeon(tm) HD Graphics (family: 0x14, model: 0x2, stepping: 0x0)
  172. [    0.432574] cblist_init_generic: Setting adjustable number of callback queues.
  173. [    0.432574] cblist_init_generic: Setting shift to 2 and lim to 1.
  174. [    0.432574] cblist_init_generic: Setting adjustable number of callback queues.
  175. [    0.432574] cblist_init_generic: Setting shift to 2 and lim to 1.
  176. [    0.432574] cblist_init_generic: Setting adjustable number of callback queues.
  177. [    0.432574] cblist_init_generic: Setting shift to 2 and lim to 1.
  178. [    0.432574] Performance Events: AMD PMU driver.
  179. [    0.432574] ... version:                0
  180. [    0.432574] ... bit width:              48
  181. [    0.432574] ... generic registers:      4
  182. [    0.432574] ... value mask:             0000ffffffffffff
  183. [    0.432574] ... max period:             00007fffffffffff
  184. [    0.432574] ... fixed-purpose events:   0
  185. [    0.432574] ... event mask:             000000000000000f
  186. [    0.432574] signal: max sigframe size: 1440
  187. [    0.432574] rcu: Hierarchical SRCU implementation.
  188. [    0.432574] rcu:     Max phase no-delay instances is 1000.
  189. [    0.432574] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
  190. [    0.432574] smp: Bringing up secondary CPUs ...
  191. [    0.433024] x86: Booting SMP configuration:
  192. [    0.433125] .... node  #0, CPUs:      #1
  193. [    0.015358] __common_interrupt: 1.55 No irq handler for vector
  194. [    0.435323] smp: Brought up 1 node, 2 CPUs
  195. [    0.435323] smpboot: Max logical packages: 2
  196. [    0.435323] smpboot: Total of 2 processors activated (5590.02 BogoMIPS)
  197. [    0.437287] devtmpfs: initialized
  198. [    0.437287] x86/mm: Memory block size: 128MB
  199. [    0.438854] ACPI: PM: Registering ACPI NVS region [mem 0xdfabf000-0xdfbbefff] (1048576 bytes)
  200. [    0.440599] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  201. [    0.440753] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
  202. [    0.440985] pinctrl core: initialized pinctrl subsystem
  203. [    0.443647] NET: Registered PF_NETLINK/PF_ROUTE protocol family
  204. [    0.444199] audit: initializing netlink subsys (disabled)
  205. [    0.444523] audit: type=2000 audit(1706034057.184:1): state=initialized audit_enabled=0 res=1
  206. [    0.444876] thermal_sys: Registered thermal governor 'fair_share'
  207. [    0.444883] thermal_sys: Registered thermal governor 'bang_bang'
  208. [    0.445013] thermal_sys: Registered thermal governor 'step_wise'
  209. [    0.445072] thermal_sys: Registered thermal governor 'user_space'
  210. [    0.445169] cpuidle: using governor ladder
  211. [    0.445328] cpuidle: using governor menu
  212. [    0.445437] Simple Boot Flag at 0x44 set to 0x1
  213. [    0.445437] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
  214. [    0.445437] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
  215. [    0.445437] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
  216. [    0.445437] PCI: Using configuration type 1 for base access
  217. [    0.454258] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
  218. [    0.518860] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
  219. [    0.519006] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
  220. [    0.519067] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
  221. [    0.519126] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
  222. [    0.519779] cryptd: max_cpu_qlen set to 1000
  223. [    0.520908] ACPI: Added _OSI(Module Device)
  224. [    0.521045] ACPI: Added _OSI(Processor Device)
  225. [    0.521102] ACPI: Added _OSI(3.0 _SCP Extensions)
  226. [    0.521159] ACPI: Added _OSI(Processor Aggregator Device)
  227. [    0.540791] ACPI: 3 ACPI AML tables successfully acquired and loaded
  228. [    0.543500] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
  229. [    0.544741] ACPI: EC: EC started
  230. [    0.544868] ACPI: EC: interrupt blocked
  231. [    0.608605] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
  232. [    0.608677] ACPI: \_SB_.PCI0.LPC0.EC0_: Boot DSDT EC used to handle transactions
  233. [    0.608748] ACPI: Interpreter enabled
  234. [    0.608850] ACPI: PM: (supports S0 S3 S4 S5)
  235. [    0.608944] ACPI: Using IOAPIC for interrupt routing
  236. [    0.609381] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
  237. [    0.609491] PCI: Using E820 reservations for host bridge windows
  238. [    0.610089] ACPI: Enabled 2 GPEs in block 00 to 1F
  239. [    0.830689] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
  240. [    0.830848] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
  241. [    0.831220] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug PME LTR]
  242. [    0.831849] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug AER PCIeCapability]
  243. [    0.831967] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
  244. [    0.832227] acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff window] (conflicts with Video ROM [mem 0x000c0000-0x000cedff])
  245. [    0.833306] PCI host bridge to bus 0000:00
  246. [    0.833369] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
  247. [    0.833432] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
  248. [    0.833494] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
  249. [    0.833566] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000cbfff window]
  250. [    0.833638] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000effff window]
  251. [    0.833708] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xf7ffffff window]
  252. [    0.833778] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfed3ffff window]
  253. [    0.833861] pci_bus 0000:00: root bus resource [mem 0xfed45000-0xffffffff window]
  254. [    0.833933] pci_bus 0000:00: root bus resource [bus 00-ff]
  255. [    0.834029] pci 0000:00:00.0: [1022:1510] type 00 class 0x060000
  256. [    0.834311] pci 0000:00:01.0: [1002:9809] type 00 class 0x030000
  257. [    0.834455] pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xefffffff pref]
  258. [    0.834523] pci 0000:00:01.0: reg 0x14: [io  0x4000-0x40ff]
  259. [    0.834590] pci 0000:00:01.0: reg 0x18: [mem 0xf0300000-0xf033ffff]
  260. [    0.834683] pci 0000:00:01.0: enabling Extended Tags
  261. [    0.834762] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
  262. [    0.834862] pci 0000:00:01.0: supports D1 D2
  263. [    0.835135] pci 0000:00:01.1: [1002:1314] type 00 class 0x040300
  264. [    0.835243] pci 0000:00:01.1: reg 0x10: [mem 0xf0344000-0xf0347fff]
  265. [    0.835343] pci 0000:00:01.1: enabling Extended Tags
  266. [    0.835477] pci 0000:00:01.1: supports D1 D2
  267. [    0.835768] pci 0000:00:10.0: [1022:7812] type 00 class 0x0c0330
  268. [    0.835855] pci 0000:00:10.0: reg 0x10: [mem 0xf0348000-0xf0349fff 64bit]
  269. [    0.836050] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
  270. [    0.836383] pci 0000:00:11.0: [1022:7804] type 00 class 0x010601
  271. [    0.836461] pci 0000:00:11.0: reg 0x10: [io  0x4118-0x411f]
  272. [    0.836527] pci 0000:00:11.0: reg 0x14: [io  0x4124-0x4127]
  273. [    0.836593] pci 0000:00:11.0: reg 0x18: [io  0x4110-0x4117]
  274. [    0.836660] pci 0000:00:11.0: reg 0x1c: [io  0x4120-0x4123]
  275. [    0.836726] pci 0000:00:11.0: reg 0x20: [io  0x4100-0x410f]
  276. [    0.836792] pci 0000:00:11.0: reg 0x24: [mem 0xf034e000-0xf034e7ff]
  277. [    0.837088] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
  278. [    0.837166] pci 0000:00:12.0: reg 0x10: [mem 0xf034d000-0xf034dfff]
  279. [    0.837550] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
  280. [    0.837996] pci 0000:00:12.2: reg 0x10: [mem 0xf034c000-0xf034c0ff]
  281. [    0.839132] pci 0000:00:12.2: supports D1 D2
  282. [    0.839188] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
  283. [    0.839495] pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
  284. [    0.839574] pci 0000:00:13.0: reg 0x10: [mem 0xf034b000-0xf034bfff]
  285. [    0.839968] pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
  286. [    0.840366] pci 0000:00:13.2: reg 0x10: [mem 0xf034a000-0xf034a0ff]
  287. [    0.841461] pci 0000:00:13.2: supports D1 D2
  288. [    0.841518] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
  289. [    0.841816] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
  290. [    0.842198] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
  291. [    0.842282] pci 0000:00:14.2: reg 0x10: [mem 0xf0340000-0xf0343fff 64bit]
  292. [    0.842433] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
  293. [    0.843883] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
  294. [    0.844267] pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
  295. [    0.844698] pci 0000:00:15.0: [1022:43a0] type 01 class 0x060400
  296. [    0.844808] pci 0000:00:15.0: enabling Extended Tags
  297. [    0.844932] pci 0000:00:15.0: supports D1 D2
  298. [    0.845196] pci 0000:00:15.1: [1022:43a1] type 01 class 0x060400
  299. [    0.845305] pci 0000:00:15.1: enabling Extended Tags
  300. [    0.845425] pci 0000:00:15.1: supports D1 D2
  301. [    0.845746] pci 0000:00:18.0: [1022:1700] type 00 class 0x060000
  302. [    0.845971] pci 0000:00:18.1: [1022:1701] type 00 class 0x060000
  303. [    0.846235] pci 0000:00:18.2: [1022:1702] type 00 class 0x060000
  304. [    0.846502] pci 0000:00:18.3: [1022:1703] type 00 class 0x060000
  305. [    0.846782] pci 0000:00:18.4: [1022:1704] type 00 class 0x060000
  306. [    0.847047] pci 0000:00:18.5: [1022:1718] type 00 class 0x060000
  307. [    0.847255] pci 0000:00:18.6: [1022:1716] type 00 class 0x060000
  308. [    0.847521] pci 0000:00:18.7: [1022:1719] type 00 class 0x060000
  309. [    0.847841] pci_bus 0000:01: extended config space not accessible
  310. [    0.848041] pci 0000:00:14.4: PCI bridge to [bus 01] (subtractive decode)
  311. [    0.848113] pci 0000:00:14.4:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
  312. [    0.848184] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
  313. [    0.848254] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
  314. [    0.848325] pci 0000:00:14.4:   bridge window [mem 0x000c0000-0x000cbfff window] (subtractive decode)
  315. [    0.848396] pci 0000:00:14.4:   bridge window [mem 0x000d0000-0x000effff window] (subtractive decode)
  316. [    0.848467] pci 0000:00:14.4:   bridge window [mem 0xe0000000-0xf7ffffff window] (subtractive decode)
  317. [    0.848539] pci 0000:00:14.4:   bridge window [mem 0xfc000000-0xfed3ffff window] (subtractive decode)
  318. [    0.848582] pci 0000:00:14.4:   bridge window [mem 0xfed45000-0xffffffff window] (subtractive decode)
  319. [    0.848818] pci 0000:02:00.0: [14e4:4727] type 00 class 0x028000
  320. [    0.848911] pci 0000:02:00.0: reg 0x10: [mem 0xf0200000-0xf0203fff 64bit]
  321. [    0.849048] pci 0000:02:00.0: enabling Extended Tags
  322. [    0.849216] pci 0000:02:00.0: supports D1 D2
  323. [    0.860770] pci 0000:00:15.0: PCI bridge to [bus 02-05]
  324. [    0.860898] pci 0000:00:15.0:   bridge window [io  0x3000-0x3fff]
  325. [    0.860962] pci 0000:00:15.0:   bridge window [mem 0xf0200000-0xf02fffff]
  326. [    0.861028] pci 0000:00:15.0:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
  327. [    0.861375] pci 0000:06:00.0: [10ec:8168] type 00 class 0x020000
  328. [    0.861466] pci 0000:06:00.0: reg 0x10: [io  0x2000-0x20ff]
  329. [    0.861561] pci 0000:06:00.0: reg 0x18: [mem 0xf0104000-0xf0104fff 64bit pref]
  330. [    0.861652] pci 0000:06:00.0: reg 0x20: [mem 0xf0100000-0xf0103fff 64bit pref]
  331. [    0.861869] pci 0000:06:00.0: supports D1 D2
  332. [    0.861927] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
  333. [    0.872766] pci 0000:00:15.1: PCI bridge to [bus 06]
  334. [    0.872891] pci 0000:00:15.1:   bridge window [io  0x2000-0x2fff]
  335. [    0.872960] pci 0000:00:15.1:   bridge window [mem 0xf0100000-0xf01fffff 64bit pref]
  336. [    0.875364] ACPI: PCI: Interrupt link LNKA configured for IRQ 0
  337. [    0.875616] ACPI: PCI: Interrupt link LNKB configured for IRQ 0
  338. [    0.875865] ACPI: PCI: Interrupt link LNKC configured for IRQ 0
  339. [    0.876111] ACPI: PCI: Interrupt link LNKD configured for IRQ 0
  340. [    0.876332] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
  341. [    0.876759] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
  342. [    0.876956] ACPI: PCI: Interrupt link LNKG configured for IRQ 0
  343. [    0.877117] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
  344. [    1.085886] ACPI: EC: interrupt unblocked
  345. [    1.085960] ACPI: EC: event unblocked
  346. [    1.086019] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
  347. [    1.086076] ACPI: EC: GPE=0x5
  348. [    1.086131] ACPI: \_SB_.PCI0.LPC0.EC0_: Boot DSDT EC initialization complete
  349. [    1.086194] ACPI: \_SB_.PCI0.LPC0.EC0_: EC: Used to handle transactions and events
  350. [    1.086418] iommu: Default domain type: Translated
  351. [    1.086544] iommu: DMA domain TLB invalidation policy: lazy mode
  352. [    1.086883] SCSI subsystem initialized
  353. [    1.087002] libata version 3.00 loaded.
  354. [    1.087002] ACPI: bus type USB registered
  355. [    1.087002] usbcore: registered new interface driver usbfs
  356. [    1.087002] usbcore: registered new interface driver hub
  357. [    1.087002] usbcore: registered new device driver usb
  358. [    1.087002] pps_core: LinuxPPS API ver. 1 registered
  359. [    1.087002] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  360. [    1.087002] PTP clock support registered
  361. [    1.087002] EDAC MC: Ver: 3.0.0
  362. [    1.089112] Bluetooth: Core ver 2.22
  363. [    1.089237] NET: Registered PF_BLUETOOTH protocol family
  364. [    1.089295] Bluetooth: HCI device and connection manager initialized
  365. [    1.089357] Bluetooth: HCI socket layer initialized
  366. [    1.089415] Bluetooth: L2CAP socket layer initialized
  367. [    1.089479] Bluetooth: SCO socket layer initialized
  368. [    1.089667] PCI: Using ACPI for IRQ routing
  369. [    1.092585] PCI: pci_cache_line_size set to 64 bytes
  370. [    1.092585] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
  371. [    1.092585] e820: reserve RAM buffer [mem 0xdf9bf000-0xdfffffff]
  372. [    1.092585] e820: reserve RAM buffer [mem 0xdfc00000-0xdfffffff]
  373. [    1.092585] e820: reserve RAM buffer [mem 0x107000000-0x107ffffff]
  374. [    1.092599] pci 0000:00:01.0: vgaarb: setting as boot VGA device
  375. [    1.092699] pci 0000:00:01.0: vgaarb: bridge control possible
  376. [    1.092759] pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
  377. [    1.092844] vgaarb: loaded
  378. [    1.092917] wmi_bus wmi_bus-PNP0C14:00: WQBC data block query control method not found
  379. [    1.093393] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
  380. [    1.093465] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
  381. [    1.096785] clocksource: Switched to clocksource tsc-early
  382. [    1.097313] VFS: Disk quotas dquot_6.6.0
  383. [    1.097419] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  384. [    1.097653] FS-Cache: Loaded
  385. [    1.098189] AppArmor: AppArmor Filesystem Enabled
  386. [    1.098377] pnp: PnP ACPI init
  387. [    1.098903] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
  388. [    1.099042] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
  389. [    1.099746] system 00:04: [io  0x0400-0x04cf] has been reserved
  390. [    1.099879] system 00:04: [io  0x04d0-0x04d1] has been reserved
  391. [    1.099939] system 00:04: [io  0x04d6] has been reserved
  392. [    1.099997] system 00:04: [io  0x0680-0x06ff] has been reserved
  393. [    1.100056] system 00:04: [io  0x077a] has been reserved
  394. [    1.100114] system 00:04: [io  0x0c00-0x0c01] has been reserved
  395. [    1.100172] system 00:04: [io  0x0c14] has been reserved
  396. [    1.100230] system 00:04: [io  0x0c50-0x0c52] has been reserved
  397. [    1.100289] system 00:04: [io  0x0c6c] has been reserved
  398. [    1.100346] system 00:04: [io  0x0c6f] has been reserved
  399. [    1.100405] system 00:04: [io  0x0cd0-0x0cdb] could not be reserved
  400. [    1.100464] system 00:04: [io  0x0840-0x0847] has been reserved
  401. [    1.100523] system 00:04: [io  0x0380-0x0387] has been reserved
  402. [    1.100803] system 00:05: [mem 0x000e0000-0x000fffff] could not be reserved
  403. [    1.100937] system 00:05: [mem 0xffc00000-0xffffffff] has been reserved
  404. [    1.312521] pnp: PnP ACPI: found 6 devices
  405. [    1.325851] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
  406. [    1.326203] NET: Registered PF_INET protocol family
  407. [    1.326654] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
  408. [    1.329631] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
  409. [    1.329821] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
  410. [    1.329982] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
  411. [    1.330264] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear)
  412. [    1.330921] TCP: Hash tables configured (established 32768 bind 32768)
  413. [    1.331251] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
  414. [    1.331472] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
  415. [    1.331821] NET: Registered PF_UNIX/PF_LOCAL protocol family
  416. [    1.332930] RPC: Registered named UNIX socket transport module.
  417. [    1.333078] RPC: Registered udp transport module.
  418. [    1.333134] RPC: Registered tcp transport module.
  419. [    1.333190] RPC: Registered tcp NFSv4.1 backchannel transport module.
  420. [    1.334060] NET: Registered PF_XDP protocol family
  421. [    1.334208] pci 0000:00:14.4: PCI bridge to [bus 01]
  422. [    1.334322] pci 0000:00:15.0: PCI bridge to [bus 02-05]
  423. [    1.334384] pci 0000:00:15.0:   bridge window [io  0x3000-0x3fff]
  424. [    1.334448] pci 0000:00:15.0:   bridge window [mem 0xf0200000-0xf02fffff]
  425. [    1.334512] pci 0000:00:15.0:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
  426. [    1.334588] pci 0000:00:15.1: PCI bridge to [bus 06]
  427. [    1.334647] pci 0000:00:15.1:   bridge window [io  0x2000-0x2fff]
  428. [    1.334712] pci 0000:00:15.1:   bridge window [mem 0xf0100000-0xf01fffff 64bit pref]
  429. [    1.334791] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
  430. [    1.334853] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
  431. [    1.334914] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
  432. [    1.334975] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000cbfff window]
  433. [    1.335035] pci_bus 0000:00: resource 8 [mem 0x000d0000-0x000effff window]
  434. [    1.335096] pci_bus 0000:00: resource 9 [mem 0xe0000000-0xf7ffffff window]
  435. [    1.335158] pci_bus 0000:00: resource 10 [mem 0xfc000000-0xfed3ffff window]
  436. [    1.335219] pci_bus 0000:00: resource 11 [mem 0xfed45000-0xffffffff window]
  437. [    1.335281] pci_bus 0000:01: resource 4 [io  0x0000-0x0cf7 window]
  438. [    1.335341] pci_bus 0000:01: resource 5 [io  0x0d00-0xffff window]
  439. [    1.335435] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff window]
  440. [    1.335531] pci_bus 0000:01: resource 7 [mem 0x000c0000-0x000cbfff window]
  441. [    1.335589] pci_bus 0000:01: resource 8 [mem 0x000d0000-0x000effff window]
  442. [    1.335648] pci_bus 0000:01: resource 9 [mem 0xe0000000-0xf7ffffff window]
  443. [    1.335706] pci_bus 0000:01: resource 10 [mem 0xfc000000-0xfed3ffff window]
  444. [    1.335765] pci_bus 0000:01: resource 11 [mem 0xfed45000-0xffffffff window]
  445. [    1.335824] pci_bus 0000:02: resource 0 [io  0x3000-0x3fff]
  446. [    1.335881] pci_bus 0000:02: resource 1 [mem 0xf0200000-0xf02fffff]
  447. [    1.335938] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
  448. [    1.336006] pci_bus 0000:06: resource 0 [io  0x2000-0x2fff]
  449. [    1.336062] pci_bus 0000:06: resource 2 [mem 0xf0100000-0xf01fffff 64bit pref]
  450. [    1.336375] pci 0000:00:01.1: D0 power state depends on 0000:00:01.0
  451. [    1.359936] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x620 took 17975 usecs
  452. [    1.379934] pci 0000:00:12.2: quirk_usb_early_handoff+0x0/0x620 took 18248 usecs
  453. [    1.380104] pci 0000:00:12.2: PME# does not work under D3, disabling it
  454. [    1.399937] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x620 took 19292 usecs
  455. [    1.419935] pci 0000:00:13.2: quirk_usb_early_handoff+0x0/0x620 took 19347 usecs
  456. [    1.420105] pci 0000:00:13.2: PME# does not work under D3, disabling it
  457. [    1.420248] PCI: CLS 64 bytes, default 64
  458. [    1.420402] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
  459. [    1.420498] software IO TLB: mapped [mem 0x00000000db9bf000-0x00000000df9bf000] (64MB)
  460. [    1.420683] LVT offset 0 assigned for vector 0x400
  461. [    1.421018] perf: AMD IBS detected (0x000000ff)
  462. [    1.422589] Initialise system trusted keyrings
  463. [    1.422771] Key type blacklist registered
  464. [    1.423331] workingset: timestamp_bits=40 max_order=20 bucket_order=0
  465. [    1.428470] zbud: loaded
  466. [    1.456951] Key type asymmetric registered
  467. [    1.457094] Asymmetric key parser 'x509' registered
  468. [    1.461900] alg: self-tests for CTR-KDF (hmac(sha256)) passed
  469. [    1.462136] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
  470. [    1.462452] io scheduler mq-deadline registered
  471. [    1.469128] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
  472. [    1.529629] ACPI: AC: AC Adapter [ACAD] (on-line)
  473. [    1.529941] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
  474. [    1.530107] ACPI: button: Power Button [PWRB]
  475. [    1.530359] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
  476. [    1.530554] ACPI: button: Lid Switch [LID]
  477. [    1.530756] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
  478. [    1.531215] ACPI: button: Power Button [PWRF]
  479. [    1.531742] ACPI: video: Video Device [VGA] (multi-head: yes  rom: no  post: no)
  480. [    1.532272] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
  481. [    1.532557] ACPI: \_PR_.C000: Found 2 idle states
  482. [    1.533282] ACPI: \_PR_.C001: Found 2 idle states
  483. [    1.537601] thermal LNXTHERM:00: registered as thermal_zone0
  484. [    1.537747] ACPI: thermal: Thermal Zone [THRM] (73 C)
  485. [    1.538210] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  486. [    1.540512] Linux agpgart interface v0.103
  487. [    1.541304] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug.
  488. [    1.541428] ACPI: bus type drm_connector registered
  489. [    1.541523] [drm] radeon kernel modesetting enabled.
  490. [    1.541675] radeon 0000:00:01.0: vgaarb: deactivate vga console
  491. [    1.542464] Console: switching to colour dummy device 80x25
  492. [    1.543506] [drm] initializing kernel modesetting (PALM 0x1002:0x9809 0x103C:0x18D4 0x00).
  493. [    1.543629] resource sanity check: requesting [mem 0x000c0000-0x000dffff], which spans more than PCI Bus 0000:00 [mem 0x000c0000-0x000cbfff window]
  494. [    1.543651] caller pci_map_rom+0x67/0x1a0 mapping multiple BARs
  495. [    1.545368] ATOM BIOS: HP_Quanta_Butternut12_Brazos20_APU
  496. [    1.545488] radeon 0000:00:01.0: VRAM: 384M 0x0000000000000000 - 0x0000000017FFFFFF (384M used)
  497. [    1.545507] radeon 0000:00:01.0: GTT: 1024M 0x0000000018000000 - 0x0000000057FFFFFF
  498. [    1.545526] [drm] Detected VRAM RAM=384M, BAR=256M
  499. [    1.545534] [drm] RAM width 32bits DDR
  500. [    1.545615] [drm] radeon: 384M of VRAM memory ready
  501. [    1.545627] [drm] radeon: 1024M of GTT memory ready.
  502. [    1.545660] [drm] Loading PALM Microcode
  503. [    1.545719] radeon 0000:00:01.0: Direct firmware load for radeon/PALM_pfp.bin failed with error -2
  504. [    1.545737] r600_cp: Failed to load firmware "radeon/PALM_pfp.bin"
  505. [    1.545746] [drm:evergreen_init] *ERROR* Failed to load firmware!
  506. [    1.545761] radeon 0000:00:01.0: Fatal error during GPU init
  507. [    1.545771] [drm] radeon: finishing device.
  508. [    1.552799] [drm] radeon: ttm finalized
  509. [    1.553805] radeon: probe of 0000:00:01.0 failed with error -2
  510. [    1.554628] ahci 0000:00:11.0: version 3.0
  511. [    1.555296] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
  512. [    1.555325] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
  513. [    1.556607] scsi host0: ahci
  514. [    1.556976] ata1: SATA max UDMA/133 abar m2048@0xf034e000 port 0xf034e100 irq 26
  515. [    1.557702] usbcore: registered new device driver r8152-cfgselector
  516. [    1.557745] usbcore: registered new interface driver r8152
  517. [    1.558215] QUIRK: Enable AMD PLL fix
  518. [    1.558308] ehci-pci 0000:00:12.2: EHCI Host Controller
  519. [    1.558332] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
  520. [    1.558353] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
  521. [    1.558411] ehci-pci 0000:00:12.2: debug port 1
  522. [    1.558512] ehci-pci 0000:00:12.2: irq 17, io mem 0xf034c000
  523. [    1.571690] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
  524. [    1.571910] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
  525. [    1.571927] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  526. [    1.571940] usb usb1: Product: EHCI Host Controller
  527. [    1.571949] usb usb1: Manufacturer: Linux 6.1.74dm1.1 ehci_hcd
  528. [    1.571959] usb usb1: SerialNumber: 0000:00:12.2
  529. [    1.572672] hub 1-0:1.0: USB hub found
  530. [    1.572719] hub 1-0:1.0: 5 ports detected
  531. [    1.573744] ehci-pci 0000:00:13.2: EHCI Host Controller
  532. [    1.573769] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
  533. [    1.573800] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
  534. [    1.573859] ehci-pci 0000:00:13.2: debug port 1
  535. [    1.573934] ehci-pci 0000:00:13.2: irq 17, io mem 0xf034a000
  536. [    1.587690] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
  537. [    1.587943] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
  538. [    1.587961] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  539. [    1.587974] usb usb2: Product: EHCI Host Controller
  540. [    1.587983] usb usb2: Manufacturer: Linux 6.1.74dm1.1 ehci_hcd
  541. [    1.587993] usb usb2: SerialNumber: 0000:00:13.2
  542. [    1.588639] hub 2-0:1.0: USB hub found
  543. [    1.588689] hub 2-0:1.0: 5 ports detected
  544. [    1.589803] ohci-pci 0000:00:12.0: OHCI PCI host controller
  545. [    1.589830] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
  546. [    1.589960] ohci-pci 0000:00:12.0: irq 18, io mem 0xf034d000
  547. [    1.651839] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01
  548. [    1.651874] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  549. [    1.651887] usb usb3: Product: OHCI PCI host controller
  550. [    1.651896] usb usb3: Manufacturer: Linux 6.1.74dm1.1 ohci_hcd
  551. [    1.651906] usb usb3: SerialNumber: 0000:00:12.0
  552. [    1.652594] hub 3-0:1.0: USB hub found
  553. [    1.652680] hub 3-0:1.0: 5 ports detected
  554. [    1.653631] ohci-pci 0000:00:13.0: OHCI PCI host controller
  555. [    1.653657] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 4
  556. [    1.653765] ohci-pci 0000:00:13.0: irq 18, io mem 0xf034b000
  557. [    1.715937] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01
  558. [    1.715973] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  559. [    1.715986] usb usb4: Product: OHCI PCI host controller
  560. [    1.715995] usb usb4: Manufacturer: Linux 6.1.74dm1.1 ohci_hcd
  561. [    1.716005] usb usb4: SerialNumber: 0000:00:13.0
  562. [    1.716690] hub 4-0:1.0: USB hub found
  563. [    1.716738] hub 4-0:1.0: 5 ports detected
  564. [    1.717807] xhci_hcd 0000:00:10.0: xHCI Host Controller
  565. [    1.717837] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 5
  566. [    1.718075] xhci_hcd 0000:00:10.0: hcc params 0x014042c3 hci version 0x96 quirks 0x0000000000000608
  567. [    1.718652] xhci_hcd 0000:00:10.0: xHCI Host Controller
  568. [    1.718670] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 6
  569. [    1.718687] xhci_hcd 0000:00:10.0: Host supports USB 3.0 SuperSpeed
  570. [    1.721644] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
  571. [    1.721662] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  572. [    1.721674] usb usb5: Product: xHCI Host Controller
  573. [    1.721683] usb usb5: Manufacturer: Linux 6.1.74dm1.1 xhci-hcd
  574. [    1.721693] usb usb5: SerialNumber: 0000:00:10.0
  575. [    1.722108] hub 5-0:1.0: USB hub found
  576. [    1.722205] hub 5-0:1.0: 2 ports detected
  577. [    1.722605] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
  578. [    1.722694] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01
  579. [    1.722710] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  580. [    1.722722] usb usb6: Product: xHCI Host Controller
  581. [    1.722731] usb usb6: Manufacturer: Linux 6.1.74dm1.1 xhci-hcd
  582. [    1.722740] usb usb6: SerialNumber: 0000:00:10.0
  583. [    1.723341] hub 6-0:1.0: USB hub found
  584. [    1.723663] hub 6-0:1.0: 2 ports detected
  585. [    1.724561] usbcore: registered new interface driver uas
  586. [    1.724661] usbcore: registered new interface driver usb-storage
  587. [    1.724706] usbcore: registered new interface driver ums-realtek
  588. [    1.724928] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
  589. [    1.728447] serio: i8042 KBD port at 0x60,0x64 irq 1
  590. [    1.728471] serio: i8042 AUX port at 0x60,0x64 irq 12
  591. [    1.729332] mousedev: PS/2 mouse device common for all mice
  592. [    1.730316] input: PC Speaker as /devices/platform/pcspkr/input/input5
  593. [    1.730499] rtc_cmos 00:01: RTC can wake from S4
  594. [    1.731116] rtc_cmos 00:01: registered as rtc0
  595. [    1.731241] rtc_cmos 00:01: setting system clock to 2024-01-23T18:20:59 UTC (1706034059)
  596. [    1.731403] rtc_cmos 00:01: alarms up to one month, 114 bytes nvram, hpet irqs
  597. [    1.731540] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\_SB.PCI0.SMBS.SMB0) (20220331/utaddress-213)
  598. [    1.731572] ACPI: OSL: Resource conflict; ACPI support missing from driver?
  599. [    1.731753] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
  600. [    1.731978] sp5100-tco sp5100-tco: Using 0xfed80b00 for watchdog MMIO address
  601. [    1.732262] sp5100-tco sp5100-tco: initialized. heartbeat=60 sec (nowayout=0)
  602. [    1.732314] wdat_wdt wdat_wdt: can't request region for resource [mem 0xfec000f0-0xfec000f3]
  603. [    1.732332] wdat_wdt: probe of wdat_wdt failed with error -16
  604. [    1.732398] usbcore: registered new interface driver btusb
  605. [    1.732483] ledtrig-cpu: registered to indicate activity on CPUs
  606. [    1.733145] bcma-pci-bridge 0000:02:00.0: bus0: Found chip with id 0x4313, rev 0x01 and package 0x08
  607. [    1.733192] bcma-pci-bridge 0000:02:00.0: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x24, class 0x0)
  608. [    1.733229] bcma-pci-bridge 0000:02:00.0: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x18, class 0x0)
  609. [    1.733285] bcma-pci-bridge 0000:02:00.0: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x11, class 0x0)
  610. [    1.745663] bcma-pci-bridge 0000:02:00.0: bus0: Bus registered
  611. [    1.747825] NET: Registered PF_INET6 protocol family
  612. [    1.751279] ACPI: battery: Slot [BAT0] (battery absent)
  613. [    1.753065] Segment Routing with IPv6
  614. [    1.753120] In-situ OAM (IOAM) with IPv6
  615. [    1.753201] mip6: Mobile IPv6
  616. [    1.753291] NET: Registered PF_PACKET protocol family
  617. [    1.753456] mpls_gso: MPLS GSO support
  618. [    1.754068] microcode: CPU0: patch_level=0x0500010d
  619. [    1.754110] microcode: CPU1: patch_level=0x0500010d
  620. [    1.754133] microcode: Microcode Update Driver: v2.2.
  621. [    1.754143] IPI shorthand broadcast: enabled
  622. [    1.754212] sched_clock: Marking stable (1742328853, 11358189)->(1762417206, -8730164)
  623. [    1.754696] registered taskstats version 1
  624. [    1.754726] Loading compiled-in X.509 certificates
  625. [    1.755438] zswap: loaded using pool lzo/zbud
  626. [    1.755928] Key type .fscrypt registered
  627. [    1.755940] Key type fscrypt-provisioning registered
  628. [    1.756018] AppArmor: AppArmor sha1 policy hashing enabled
  629. [    1.812835] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
  630. [    1.822138] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
  631. [    1.827460] usb 1-1: new high-speed USB device number 2 using ehci-pci
  632. [    1.847475] usb 2-1: new high-speed USB device number 2 using ehci-pci
  633. [    1.985608] usb 1-1: New USB device found, idVendor=0b05, idProduct=17ab, bcdDevice= 2.00
  634. [    1.985644] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  635. [    1.985656] usb 1-1: Product: 802.11n WLAN Adapter
  636. [    1.985666] usb 1-1: Manufacturer: Realtek
  637. [    1.985674] usb 1-1: SerialNumber: 00e04c000001
  638. [    2.005277] usb 2-1: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=30.00
  639. [    2.005314] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=6
  640. [    2.005326] usb 2-1: Product: USB 10/100/1000 LAN
  641. [    2.005335] usb 2-1: Manufacturer: Realtek
  642. [    2.005344] usb 2-1: SerialNumber: 000001000000
  643. [    2.031546] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  644. [    2.056216] ata1.00: ATA-8: ST320LT007-9ZV142, 0004LVM1, max UDMA/133
  645. [    2.056251] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 32)
  646. [    2.067229] ata1.00: configured for UDMA/133
  647. [    2.067678] scsi 0:0:0:0: Direct-Access     ATA      ST320LT007-9ZV14 LVM1 PQ: 0 ANSI: 5
  648. [    2.068373] sd 0:0:0:0: Attached scsi generic sg0 type 0
  649. [    2.068665] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
  650. [    2.068701] sd 0:0:0:0: [sda] 4096-byte physical blocks
  651. [    2.068748] sd 0:0:0:0: [sda] Write Protect is off
  652. [    2.068761] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  653. [    2.068816] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  654. [    2.068906] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes
  655. [    2.111484] usb 1-4: new high-speed USB device number 3 using ehci-pci
  656. [    2.132773]  sda: sda1 sda2 < sda5 sda6 sda7 >
  657. [    2.133469] sd 0:0:0:0: [sda] Attached SCSI disk
  658. [    2.143417] r8152-cfgselector 2-1: reset high-speed USB device number 2 using ehci-pci
  659. [    2.307823] r8152 2-1:1.0: Direct firmware load for rtl_nic/rtl8153a-3.fw failed with error -2
  660. [    2.307862] r8152 2-1:1.0: unable to load firmware patch rtl_nic/rtl8153a-3.fw (-2)
  661. [    2.343726] acpi_cpufreq: overriding BIOS provided _PSD data
  662. [    2.344315] cfg80211: Loading compiled-in X.509 certificates for regulatory database
  663. [    2.346060] r8152 2-1:1.0 eth0: v1.12.13
  664. [    2.426757] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
  665. [    2.428363] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
  666. [    2.428827] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
  667. [    2.428873] cfg80211: failed to load regulatory.db
  668. [    2.435635] tsc: Refined TSC clocksource calibration: 1397.458 MHz
  669. [    2.435697] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1424bf0d8ee, max_idle_ns: 440795249698 ns
  670. [    2.435796] clocksource: Switched to clocksource tsc
  671. [    2.525130] usb 1-4: New USB device found, idVendor=0bda, idProduct=0138, bcdDevice=38.82
  672. [    2.525184] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  673. [    2.525206] usb 1-4: Product: USB2.0-CRW
  674. [    2.525221] usb 1-4: Manufacturer: Generic
  675. [    2.525236] usb 1-4: SerialNumber: 20090516388200000
  676. [    2.532192] ums-realtek 1-4:1.0: USB Mass Storage device detected
  677. [    2.537645] scsi host1: usb-storage 1-4:1.0
  678. [    2.571560] psmouse serio1: synaptics: queried max coordinates: x [..5776], y [..5012]
  679. [    2.644665] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x240000/0xa0400/0x0, board id: 1679, fw id: 724542
  680. [    2.695998] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
  681. [    2.795429] usb 4-2: new full-speed USB device number 2 using ohci-pci
  682. [    2.795629] EXT4-fs (sda7): mounted filesystem with ordered data mode. Quota mode: none.
  683. [    2.795734] VFS: Mounted root (ext4 filesystem) readonly on device 8:7.
  684. [    2.804853] Freeing unused kernel image (initmem) memory: 2208K
  685. [    2.804911] Write protecting the kernel read-only data: 28672k
  686. [    2.807726] Freeing unused kernel image (text/rodata gap) memory: 2032K
  687. [    2.809450] Freeing unused kernel image (rodata/data gap) memory: 1560K
  688. [    2.991976] x86/mm: Checked W+X mappings: passed, no W+X pages found.
  689. [    2.992149] Run /sbin/init as init process
  690. [    2.992197]   with arguments:
  691. [    2.992204]     /sbin/init
  692. [    2.992210]     auto
  693. [    2.992215]   with environment:
  694. [    2.992219]     HOME=/
  695. [    2.992224]     TERM=linux
  696. [    2.992229]     BOOT_IMAGE=linux-6174
  697. [    3.026496] usb 4-2: New USB device found, idVendor=0a5c, idProduct=21e3, bcdDevice= 1.12
  698. [    3.026549] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  699. [    3.026571] usb 4-2: Product: BCM20702A0
  700. [    3.026587] usb 4-2: Manufacturer: Broadcom Corp
  701. [    3.026603] usb 4-2: SerialNumber: 08EDB9EAC5B8
  702. [    3.027437] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
  703. [    3.143733] Bluetooth: hci0: BCM: chip id 63
  704. [    3.145640] Bluetooth: hci0: BCM: features 0x07
  705. [    3.162635] Bluetooth: hci0: BCM20702A
  706. [    3.162657] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000
  707. [    3.168726] Bluetooth: hci0: BCM: firmware Patch file not found, tried:
  708. [    3.168771] Bluetooth: hci0: BCM: 'brcm/BCM20702A1-0a5c-21e3.hcd'
  709. [    3.168787] Bluetooth: hci0: BCM: 'brcm/BCM-0a5c-21e3.hcd'
  710. [    3.539627] usb 2-4: new high-speed USB device number 4 using ehci-pci
  711. [    3.559778] scsi 1:0:0:0: Direct-Access     Generic- Multi-Card       1.00 PQ: 0 ANSI: 0 CCS
  712. [    3.560739] sd 1:0:0:0: Attached scsi generic sg1 type 0
  713. [    3.564212] sd 1:0:0:0: [sdb] Media removed, stopped polling
  714. [    3.565605] sd 1:0:0:0: [sdb] Attached SCSI removable disk
  715. [    3.741296] usb 2-4: New USB device found, idVendor=05c8, idProduct=032b, bcdDevice= 1.08
  716. [    3.741349] usb 2-4: New USB device strings: Mfr=3, Product=1, SerialNumber=2
  717. [    3.741371] usb 2-4: Product: HP TrueVision HD
  718. [    3.741387] usb 2-4: Manufacturer: Generic
  719. [    3.741403] usb 2-4: SerialNumber: 200901010001
  720. [    4.677030] udevd[225]: starting version 3.2.9
  721. [    5.303390] random: crng init done
  722. [    5.462796] udevd[226]: starting eudev-3.2.9
  723. [    6.115002] r8152 2-1:1.0 eth1: renamed from eth0
  724. [    6.237749] rtlwifi: module verification failed: signature and/or required key missing - tainting kernel
  725. [    6.281446] r8169 0000:06:00.0 eth0: RTL8168evl/8111evl, 28:92:4a:40:19:db, XID 2c9, IRQ 30
  726. [    6.281503] r8169 0000:06:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
  727. [    6.327042] rtl8192cu: Chip version 0x11
  728. [    6.423337] rtl8192cu: Board Type 0
  729. [    6.423757] rtl_usb: rx_max_size 15360, rx_urb_num 8, in_ep 1
  730. [    6.423855] rtl8192cu: Loading firmware rtlwifi/rtl8192cufw_TMSC.bin
  731. [    6.424241] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
  732. [    6.425531] usbcore: registered new interface driver rtl8192cu
  733. [    6.464369] rtl8192cu 1-1:1.0 wlan3: renamed from wlan0
  734. [    8.579822] Adding 1023996k swap on /dev/sda1.  Priority:-2 extents:1 across:1023996k FS
  735. [    8.712982] EXT4-fs (sda7): re-mounted. Quota mode: none.
  736. [    8.960627] EXT4-fs (sda7): re-mounted. Quota mode: none.
  737. [   11.614612] RTL8211E Gigabit Ethernet r8169-0-600:00: attached PHY driver (mii_bus:phy_addr=r8169-0-600:00, irq=MAC)
  738. [   11.878546] r8169 0000:06:00.0 eth0: Link is Down
  739. [   12.057640] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
  740. [   12.058433] r8152 2-1:1.0 eth1: carrier on
  741. [   12.168915] rtl8192cu: MAC auto ON okay!
  742. [   12.204258] rtl8192cu: Tx queue select: 0x05
  743. [   14.492326] r8169 0000:06:00.0 eth0: Link is Up - 1Gbps/Full - flow control off
  744. [   14.492406] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  745. [   19.518489] IPv6: ADDRCONF(NETDEV_CHANGE): wlan3: link becomes ready
  746. [   35.682582] rtlwifi: -----hwsec_cam_bitmap: 0x0 entry_idx=4
  747. [  272.132748] Key type dns_resolver registered
  748. [  272.878015] NFS: Registering the id_resolver key type
  749. [  272.878079] Key type id_resolver registered
  750. [  272.878093] Key type id_legacy registered

Quellcode

Hier kannst du den Code kopieren und ihn in deinen bevorzugten Editor einfügen. PASTEBIN_DOWNLOAD_SNIPPET_EXPLAIN