NoPaste

smartctl WX32D83C1X4U

von borsti1987
SNIPPET_DESC:
sudo smartctl -x /dev/sdX
SNIPPET_CREATION_TIME:
12.02.2024 20:22:27
SNIPPET_PRUNE_TIME:
12.05.2024 21:22:27

SNIPPET_TEXT:
  1. smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.0-17-amd64] (local build)
  2. Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
  3.  
  4. === START OF INFORMATION SECTION ===
  5. Device Model:     WDC WD60EFPX-68C5ZN0
  6. Serial Number:    WD-WX32D83C1X4U
  7. LU WWN Device Id: 5 0014ee 2160c9b44
  8. Firmware Version: 81.00A81
  9. User Capacity:    6.001.175.126.016 bytes [6,00 TB]
  10. Sector Sizes:     512 bytes logical, 4096 bytes physical
  11. Rotation Rate:    5400 rpm
  12. Form Factor:      3.5 inches
  13. Device is:        Not in smartctl database 7.3/5319
  14. ATA Version is:   ACS-3 T13/2161-D revision 5
  15. SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)
  16. Local Time is:    Mon Feb 12 20:07:54 2024 CET
  17. SMART support is: Available - device has SMART capability.
  18. SMART support is: Enabled
  19. AAM feature is:   Unavailable
  20. APM feature is:   Unavailable
  21. Rd look-ahead is: Enabled
  22. Write cache is:   Enabled
  23. DSN feature is:   Unavailable
  24. ATA Security is:  Disabled, NOT FROZEN [SEC1]
  25. Wt Cache Reorder: Enabled
  26.  
  27. === START OF READ SMART DATA SECTION ===
  28. SMART overall-health self-assessment test result: PASSED
  29.  
  30. General SMART Values:
  31. Offline data collection status:  (0x04) Offline data collection activity
  32.                                         was suspended by an interrupting command from host.
  33.                                         Auto Offline Data Collection: Disabled.
  34. Self-test execution status:      (   0) The previous self-test routine completed
  35.                                         without error or no self-test has ever
  36.                                         been run.
  37. Total time to complete Offline
  38. data collection:                (60660) seconds.
  39. Offline data collection
  40. capabilities:                    (0x7b) SMART execute Offline immediate.
  41.                                         Auto Offline data collection on/off support.
  42.                                         Suspend Offline collection upon new
  43.                                         command.
  44.                                         Offline surface scan supported.
  45.                                         Self-test supported.
  46.                                         Conveyance Self-test supported.
  47.                                         Selective Self-test supported.
  48. SMART capabilities:            (0x0003) Saves SMART data before entering
  49.                                         power-saving mode.
  50.                                         Supports SMART auto save timer.
  51. Error logging capability:        (0x01) Error logging supported.
  52.                                         General Purpose Logging supported.
  53. Short self-test routine
  54. recommended polling time:        (   2) minutes.
  55. Extended self-test routine
  56. recommended polling time:        ( 630) minutes.
  57. Conveyance self-test routine
  58. recommended polling time:        (   5) minutes.
  59. SCT capabilities:              (0x3039) SCT Status supported.
  60.                                         SCT Error Recovery Control supported.
  61.                                         SCT Feature Control supported.
  62.                                         SCT Data Table supported.
  63.  
  64. SMART Attributes Data Structure revision number: 16
  65. Vendor Specific SMART Attributes with Thresholds:
  66. ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  67.   1 Raw_Read_Error_Rate     POSR-K   200   200   051    -    37
  68.   3 Spin_Up_Time            POS--K   223   222   021    -    3833
  69.   4 Start_Stop_Count        -O--CK   100   100   000    -    38
  70.   5 Reallocated_Sector_Ct   PO--CK   200   200   140    -    0
  71.   7 Seek_Error_Rate         -OSR-K   200   200   000    -    0
  72.   9 Power_On_Hours          -O--CK   100   100   000    -    145
  73.  10 Spin_Retry_Count        -O--CK   100   253   000    -    0
  74.  11 Calibration_Retry_Count -O--CK   100   253   000    -    0
  75.  12 Power_Cycle_Count       -O--CK   100   100   000    -    38
  76. 192 Power-Off_Retract_Count -O--CK   200   200   000    -    24
  77. 193 Load_Cycle_Count        -O--CK   200   200   000    -    38
  78. 194 Temperature_Celsius     -O---K   127   108   000    -    23
  79. 196 Reallocated_Event_Count -O--CK   200   200   000    -    0
  80. 197 Current_Pending_Sector  -O--CK   200   200   000    -    7
  81. 198 Offline_Uncorrectable   ----CK   100   253   000    -    0
  82. 199 UDMA_CRC_Error_Count    -O--CK   200   200   000    -    0
  83. 200 Multi_Zone_Error_Rate   ---R--   100   253   000    -    0
  84.                             ||||||_ K auto-keep
  85.                             |||||__ C event count
  86.                             ||||___ R error rate
  87.                             |||____ S speed/performance
  88.                             ||_____ O updated online
  89.                             |______ P prefailure warning
  90.  
  91. General Purpose Log Directory Version 1
  92. SMART           Log Directory Version 1 [multi-sector log support]
  93. Address    Access  R/W   Size  Description
  94. 0x00       GPL,SL  R/O      1  Log Directory
  95. 0x01           SL  R/O      1  Summary SMART error log
  96. 0x02           SL  R/O      5  Comprehensive SMART error log
  97. 0x03       GPL     R/O      6  Ext. Comprehensive SMART error log
  98. 0x04       GPL     R/O    256  Device Statistics log
  99. 0x04       SL      R/O    255  Device Statistics log
  100. 0x06           SL  R/O      1  SMART self-test log
  101. 0x07       GPL     R/O      1  Extended self-test log
  102. 0x09           SL  R/W      1  Selective self-test log
  103. 0x0c       GPL     R/O   2048  Pending Defects log
  104. 0x10       GPL     R/O      1  NCQ Command Error log
  105. 0x11       GPL     R/O      1  SATA Phy Event Counters log
  106. 0x24       GPL     R/O    307  Current Device Internal Status Data log
  107. 0x30       GPL,SL  R/O      9  IDENTIFY DEVICE data log
  108. 0x80-0x9f  GPL,SL  R/W     16  Host vendor specific log
  109. 0xa0-0xa7  GPL,SL  VS      16  Device vendor specific log
  110. 0xa8-0xb6  GPL,SL  VS       1  Device vendor specific log
  111. 0xb7       GPL,SL  VS      78  Device vendor specific log
  112. 0xbd       GPL,SL  VS       1  Device vendor specific log
  113. 0xc0       GPL,SL  VS       1  Device vendor specific log
  114. 0xc1       GPL     VS      93  Device vendor specific log
  115. 0xe0       GPL,SL  R/W      1  SCT Command/Status
  116. 0xe1       GPL,SL  R/W      1  SCT Data Transfer
  117.  
  118. SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
  119. Device Error Count: 56 (device log contains only the most recent 24 errors)
  120.         CR     = Command Register
  121.         FEATR  = Features Register
  122.         COUNT  = Count (was: Sector Count) Register
  123.         LBA_48 = Upper bytes of LBA High/Mid/Low Registers ]  ATA-8
  124.         LH     = LBA High (was: Cylinder High) Register    ]   LBA
  125.         LM     = LBA Mid (was: Cylinder Low) Register      ] Register
  126.         LL     = LBA Low (was: Sector Number) Register     ]
  127.         DV     = Device (was: Device/Head) Register
  128.         DC     = Device Control Register
  129.         ER     = Error register
  130.         ST     = Status register
  131. Powered_Up_Time is measured from power on, and printed as
  132. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  133. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  134.  
  135. Error 56 [7] occurred at disk power-on lifetime: 145 hours (6 days + 1 hours)
  136.   When the command that caused the error occurred, the device was active or idle.
  137.  
  138.   After command completion occurred, registers were:
  139.   ER -- ST COUNT  LBA_48  LH LM LL DV DC
  140.   -- -- -- == -- == == == -- -- -- -- --
  141.   40 -- 51 00 00 00 00 00 00 22 60 40 00  Error: UNC at LBA = 0x00002260 = 8800
  142.  
  143.   Commands leading to the command that caused the error were:
  144.   CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  145.   -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  146.   60 00 08 00 98 00 00 00 00 22 60 40 08     00:37:51.458  READ FPDMA QUEUED
  147.   60 00 08 00 90 00 00 00 00 22 58 40 08     00:37:51.458  READ FPDMA QUEUED
  148.   60 00 08 00 88 00 00 00 00 22 50 40 08     00:37:51.458  READ FPDMA QUEUED
  149.   60 00 08 00 80 00 00 00 00 22 48 40 08     00:37:51.458  READ FPDMA QUEUED
  150.   60 00 08 00 78 00 00 00 00 22 40 40 08     00:37:51.458  READ FPDMA QUEUED
  151.  
  152. Error 55 [6] occurred at disk power-on lifetime: 145 hours (6 days + 1 hours)
  153.   When the command that caused the error occurred, the device was active or idle.
  154.  
  155.   After command completion occurred, registers were:
  156.   ER -- ST COUNT  LBA_48  LH LM LL DV DC
  157.   -- -- -- == -- == == == -- -- -- -- --
  158.   40 -- 51 00 00 00 00 00 00 22 60 40 00  Error: UNC at LBA = 0x00002260 = 8800
  159.  
  160.   Commands leading to the command that caused the error were:
  161.   CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  162.   -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  163.   60 0a 00 00 68 00 00 00 00 28 00 40 08     00:37:48.887  READ FPDMA QUEUED
  164.   60 0a 00 00 50 00 00 00 00 1e 00 40 08     00:37:48.886  READ FPDMA QUEUED
  165.   60 0a 00 00 48 00 00 00 00 14 00 40 08     00:37:48.884  READ FPDMA QUEUED
  166.   60 02 b0 00 40 00 00 00 00 11 50 40 08     00:37:48.883  READ FPDMA QUEUED
  167.   60 07 50 00 38 00 00 00 00 0a 00 40 08     00:37:48.881  READ FPDMA QUEUED
  168.  
  169. Error 54 [5] occurred at disk power-on lifetime: 145 hours (6 days + 1 hours)
  170.   When the command that caused the error occurred, the device was active or idle.
  171.  
  172.   After command completion occurred, registers were:
  173.   ER -- ST COUNT  LBA_48  LH LM LL DV DC
  174.   -- -- -- == -- == == == -- -- -- -- --
  175.   40 -- 51 00 00 00 00 00 00 22 60 40 00  Error: UNC at LBA = 0x00002260 = 8800
  176.  
  177.   Commands leading to the command that caused the error were:
  178.   CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  179.   -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  180.   60 00 08 00 e8 00 00 00 00 22 60 40 08     00:37:45.275  READ FPDMA QUEUED
  181.   60 00 08 00 e0 00 00 00 00 22 58 40 08     00:37:45.275  READ FPDMA QUEUED
  182.   60 00 08 00 d8 00 00 00 00 22 50 40 08     00:37:45.275  READ FPDMA QUEUED
  183.   60 00 08 00 d0 00 00 00 00 22 48 40 08     00:37:45.275  READ FPDMA QUEUED
  184.   60 00 08 00 c8 00 00 00 00 22 40 40 08     00:37:45.275  READ FPDMA QUEUED
  185.  
  186. Error 53 [4] occurred at disk power-on lifetime: 145 hours (6 days + 1 hours)
  187.   When the command that caused the error occurred, the device was active or idle.
  188.  
  189.   After command completion occurred, registers were:
  190.   ER -- ST COUNT  LBA_48  LH LM LL DV DC
  191.   -- -- -- == -- == == == -- -- -- -- --
  192.   40 -- 51 00 00 00 00 00 00 22 60 40 00  Error: UNC at LBA = 0x00002260 = 8800
  193.  
  194.   Commands leading to the command that caused the error were:
  195.   CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  196.   -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  197.   60 04 b8 00 b0 00 00 00 00 23 48 40 08     00:37:42.611  READ FPDMA QUEUED
  198.   60 05 48 00 a8 00 00 00 00 1e 00 40 08     00:37:42.611  READ FPDMA QUEUED
  199.   60 04 88 00 a0 00 00 00 00 19 78 40 08     00:37:42.605  READ FPDMA QUEUED
  200.   60 05 78 00 98 00 00 00 00 14 00 40 08     00:37:42.605  READ FPDMA QUEUED
  201.   60 04 c0 00 90 00 00 00 00 0f 40 40 08     00:37:42.605  READ FPDMA QUEUED
  202.  
  203. Error 52 [3] occurred at disk power-on lifetime: 145 hours (6 days + 1 hours)
  204.   When the command that caused the error occurred, the device was active or idle.
  205.  
  206.   After command completion occurred, registers were:
  207.   ER -- ST COUNT  LBA_48  LH LM LL DV DC
  208.   -- -- -- == -- == == == -- -- -- -- --
  209.   40 -- 51 00 00 00 00 00 00 22 60 40 00  Error: UNC at LBA = 0x00002260 = 8800
  210.  
  211.   Commands leading to the command that caused the error were:
  212.   CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  213.   -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  214.   60 00 08 00 70 00 00 00 00 22 60 40 08     00:37:39.070  READ FPDMA QUEUED
  215.   60 00 08 00 68 00 00 00 00 22 58 40 08     00:37:39.070  READ FPDMA QUEUED
  216.   60 00 08 00 60 00 00 00 00 22 50 40 08     00:37:39.070  READ FPDMA QUEUED
  217.   60 00 08 00 58 00 00 00 00 22 48 40 08     00:37:39.070  READ FPDMA QUEUED
  218.   60 00 08 00 50 00 00 00 00 22 40 40 08     00:37:39.070  READ FPDMA QUEUED
  219.  
  220. Error 51 [2] occurred at disk power-on lifetime: 145 hours (6 days + 1 hours)
  221.   When the command that caused the error occurred, the device was active or idle.
  222.  
  223.   After command completion occurred, registers were:
  224.   ER -- ST COUNT  LBA_48  LH LM LL DV DC
  225.   -- -- -- == -- == == == -- -- -- -- --
  226.   40 -- 51 00 00 00 00 00 00 22 60 40 00  Error: UNC at LBA = 0x00002260 = 8800
  227.  
  228.   Commands leading to the command that caused the error were:
  229.   CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  230.   -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  231.   60 04 c0 00 60 00 00 00 00 23 40 40 08     00:37:36.429  READ FPDMA QUEUED
  232.   60 05 40 00 58 00 00 00 00 1e 00 40 08     00:37:36.429  READ FPDMA QUEUED
  233.   60 04 28 00 50 00 00 00 00 19 d8 40 08     00:37:36.426  READ FPDMA QUEUED
  234.   60 05 d8 00 48 00 00 00 00 14 00 40 08     00:37:36.426  READ FPDMA QUEUED
  235.   60 04 b0 00 40 00 00 00 00 0f 50 40 08     00:37:36.422  READ FPDMA QUEUED
  236.  
  237. Error 50 [1] occurred at disk power-on lifetime: 145 hours (6 days + 1 hours)
  238.   When the command that caused the error occurred, the device was active or idle.
  239.  
  240.   After command completion occurred, registers were:
  241.   ER -- ST COUNT  LBA_48  LH LM LL DV DC
  242.   -- -- -- == -- == == == -- -- -- -- --
  243.   40 -- 51 00 00 00 00 00 00 22 60 40 00  Error: UNC at LBA = 0x00002260 = 8800
  244.  
  245.   Commands leading to the command that caused the error were:
  246.   CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  247.   -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  248.   60 00 08 00 f0 00 00 00 00 22 60 40 08     00:37:32.857  READ FPDMA QUEUED
  249.   60 00 08 00 e8 00 00 00 00 22 58 40 08     00:37:32.857  READ FPDMA QUEUED
  250.   60 00 08 00 e0 00 00 00 00 22 50 40 08     00:37:32.857  READ FPDMA QUEUED
  251.   60 00 08 00 d8 00 00 00 00 22 48 40 08     00:37:32.857  READ FPDMA QUEUED
  252.   60 00 08 00 d0 00 00 00 00 22 40 40 08     00:37:32.857  READ FPDMA QUEUED
  253.  
  254. Error 49 [0] occurred at disk power-on lifetime: 145 hours (6 days + 1 hours)
  255.   When the command that caused the error occurred, the device was active or idle.
  256.  
  257.   After command completion occurred, registers were:
  258.   ER -- ST COUNT  LBA_48  LH LM LL DV DC
  259.   -- -- -- == -- == == == -- -- -- -- --
  260.   40 -- 51 00 00 00 00 00 00 22 60 40 00  Error: UNC at LBA = 0x00002260 = 8800
  261.  
  262.   Commands leading to the command that caused the error were:
  263.   CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  264.   -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  265.   60 0a 00 00 f8 00 00 00 00 28 00 40 08     00:37:30.292  READ FPDMA QUEUED
  266.   60 0a 00 00 b8 00 00 00 00 1e 00 40 08     00:37:30.290  READ FPDMA QUEUED
  267.   60 01 f8 00 b0 00 00 00 00 1c 08 40 08     00:37:30.288  READ FPDMA QUEUED
  268.   60 08 08 00 a8 00 00 00 00 14 00 40 08     00:37:30.288  READ FPDMA QUEUED
  269.   60 04 90 00 a0 00 00 00 00 0f 70 40 08     00:37:30.287  READ FPDMA QUEUED
  270.  
  271. SMART Extended Self-test Log Version: 1 (1 sectors)
  272. Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
  273. # 1  Short offline       Completed: read failure       90%       145         8800
  274. # 2  Short offline       Completed: read failure       90%       145         8800
  275. # 3  Short offline       Completed: read failure       90%       144         8800
  276. # 4  Conveyance offline  Completed: read failure       90%       144         8800
  277. # 5  Extended offline    Completed: read failure       90%       144         8800
  278. # 6  Short offline       Completed without error       00%        99         -
  279. # 7  Extended offline    Aborted by host               90%        99         -
  280. # 8  Short offline       Completed without error       00%        99         -
  281. # 9  Short offline       Completed without error       00%         0         -
  282.  
  283. SMART Selective self-test log data structure revision number 1
  284.  SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
  285.     1        0        0  Not_testing
  286.     2        0        0  Not_testing
  287.     3        0        0  Not_testing
  288.     4        0        0  Not_testing
  289.     5        0        0  Not_testing
  290. Selective self-test flags (0x0):
  291.   After scanning selected spans, do NOT read-scan remainder of disk.
  292. If Selective self-test is pending on power-up, resume after 0 minute delay.
  293.  
  294. SCT Status Version:                  3
  295. SCT Version (vendor specific):       258 (0x0102)
  296. Device State:                        Active (0)
  297. Current Temperature:                    23 Celsius
  298. Power Cycle Min/Max Temperature:     23/23 Celsius
  299. Lifetime    Min/Max Temperature:     20/42 Celsius
  300. Under/Over Temperature Limit Count:   0/0
  301. Vendor specific:
  302. 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  303. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  304.  
  305. SCT Temperature History Version:     2
  306. Temperature Sampling Period:         1 minute
  307. Temperature Logging Interval:        1 minute
  308. Min/Max recommended Temperature:      0/65 Celsius
  309. Min/Max Temperature Limit:           -41/85 Celsius
  310. Temperature History Size (Index):    478 (161)
  311.  
  312. Index    Estimated Time   Temperature Celsius
  313.  162    2024-02-12 12:10    30  ***********
  314.  ...    ..(362 skipped).    ..  ***********
  315.   47    2024-02-12 18:13    30  ***********
  316.   48    2024-02-12 18:14     ?  -
  317.   49    2024-02-12 18:15    30  ***********
  318.   50    2024-02-12 18:16    29  **********
  319.   51    2024-02-12 18:17    29  **********
  320.   52    2024-02-12 18:18    29  **********
  321.   53    2024-02-12 18:19    30  ***********
  322.  ...    ..(  4 skipped).    ..  ***********
  323.   58    2024-02-12 18:24    30  ***********
  324.   59    2024-02-12 18:25    31  ************
  325.   60    2024-02-12 18:26    31  ************
  326.   61    2024-02-12 18:27    31  ************
  327.   62    2024-02-12 18:28     ?  -
  328.   63    2024-02-12 18:29    31  ************
  329.  ...    ..(  6 skipped).    ..  ************
  330.   70    2024-02-12 18:36    31  ************
  331.   71    2024-02-12 18:37    32  *************
  332.   72    2024-02-12 18:38    32  *************
  333.   73    2024-02-12 18:39    32  *************
  334.   74    2024-02-12 18:40    31  ************
  335.   75    2024-02-12 18:41     ?  -
  336.   76    2024-02-12 18:42    29  **********
  337.   77    2024-02-12 18:43    28  *********
  338.   78    2024-02-12 18:44    28  *********
  339.   79    2024-02-12 18:45    29  **********
  340.  ...    ..(  2 skipped).    ..  **********
  341.   82    2024-02-12 18:48    29  **********
  342.   83    2024-02-12 18:49    30  ***********
  343.  ...    ..(  6 skipped).    ..  ***********
  344.   90    2024-02-12 18:56    30  ***********
  345.   91    2024-02-12 18:57    31  ************
  346.  ...    ..(  5 skipped).    ..  ************
  347.   97    2024-02-12 19:03    31  ************
  348.   98    2024-02-12 19:04    32  *************
  349.   99    2024-02-12 19:05    32  *************
  350.  100    2024-02-12 19:06    32  *************
  351.  101    2024-02-12 19:07    33  **************
  352.  ...    ..(  2 skipped).    ..  **************
  353.  104    2024-02-12 19:10    33  **************
  354.  105    2024-02-12 19:11    34  ***************
  355.  ...    ..(  3 skipped).    ..  ***************
  356.  109    2024-02-12 19:15    34  ***************
  357.  110    2024-02-12 19:16    35  ****************
  358.  ...    ..(  4 skipped).    ..  ****************
  359.  115    2024-02-12 19:21    35  ****************
  360.  116    2024-02-12 19:22     ?  -
  361.  117    2024-02-12 19:23    36  *****************
  362.  ...    ..( 11 skipped).    ..  *****************
  363.  129    2024-02-12 19:35    36  *****************
  364.  130    2024-02-12 19:36    37  ******************
  365.  ...    ..( 10 skipped).    ..  ******************
  366.  141    2024-02-12 19:47    37  ******************
  367.  142    2024-02-12 19:48    38  *******************
  368.  ...    ..( 11 skipped).    ..  *******************
  369.  154    2024-02-12 20:00    38  *******************
  370.  155    2024-02-12 20:01     ?  -
  371.  156    2024-02-12 20:02    21  **
  372.  157    2024-02-12 20:03    21  **
  373.  158    2024-02-12 20:04    22  ***
  374.  159    2024-02-12 20:05    23  ****
  375.  160    2024-02-12 20:06     ?  -
  376.  161    2024-02-12 20:07    23  ****
  377.  
  378. SCT Error Recovery Control:
  379.            Read:     70 (7,0 seconds)
  380.           Write:     70 (7,0 seconds)
  381.  
  382. Device Statistics (GP Log 0x04)
  383. Page  Offset Size        Value Flags Description
  384. 0x01  =====  =               =  ===  == General Statistics (rev 3) ==
  385. 0x01  0x008  4              38  ---  Lifetime Power-On Resets
  386. 0x01  0x010  4             145  ---  Power-on Hours
  387. 0x01  0x018  6         5498525  ---  Logical Sectors Written
  388. 0x01  0x020  6          159381  ---  Number of Write Commands
  389. 0x01  0x028  6     70399195383  ---  Logical Sectors Read
  390. 0x01  0x030  6        56254677  ---  Number of Read Commands
  391. 0x01  0x038  6       522000000  ---  Date and Time TimeStamp
  392. 0x02  =====  =               =  ===  == Free-Fall Statistics (rev 1) ==
  393. 0x02  0x010  4               0  ---  Overlimit Shock Events
  394. 0x03  =====  =               =  ===  == Rotating Media Statistics (rev 1) ==
  395. 0x03  0x008  4             144  ---  Spindle Motor Power-on Hours
  396. 0x03  0x010  4              98  ---  Head Flying Hours
  397. 0x03  0x018  4              63  ---  Head Load Events
  398. 0x03  0x020  4               0  ---  Number of Reallocated Logical Sectors
  399. 0x03  0x028  4           92184  ---  Read Recovery Attempts
  400. 0x03  0x030  4               0  ---  Number of Mechanical Start Failures
  401. 0x03  0x038  4             128  ---  Number of Realloc. Candidate Logical Sectors
  402. 0x03  0x040  4              24  ---  Number of High Priority Unload Events
  403. 0x04  =====  =               =  ===  == General Errors Statistics (rev 1) ==
  404. 0x04  0x008  4              56  ---  Number of Reported Uncorrectable Errors
  405. 0x04  0x010  4               0  ---  Resets Between Cmd Acceptance and Completion
  406. 0x05  =====  =               =  ===  == Temperature Statistics (rev 1) ==
  407. 0x05  0x008  1              23  ---  Current Temperature
  408. 0x05  0x010  1              32  ---  Average Short Term Temperature
  409. 0x05  0x018  1               -  ---  Average Long Term Temperature
  410. 0x05  0x020  1              42  ---  Highest Temperature
  411. 0x05  0x028  1              24  ---  Lowest Temperature
  412. 0x05  0x030  1              37  ---  Highest Average Short Term Temperature
  413. 0x05  0x038  1              30  ---  Lowest Average Short Term Temperature
  414. 0x05  0x040  1               -  ---  Highest Average Long Term Temperature
  415. 0x05  0x048  1               -  ---  Lowest Average Long Term Temperature
  416. 0x05  0x050  4               0  ---  Time in Over-Temperature
  417. 0x05  0x058  1              65  ---  Specified Maximum Operating Temperature
  418. 0x05  0x060  4               0  ---  Time in Under-Temperature
  419. 0x05  0x068  1               0  ---  Specified Minimum Operating Temperature
  420. 0x06  =====  =               =  ===  == Transport Statistics (rev 1) ==
  421. 0x06  0x008  4             200  ---  Number of Hardware Resets
  422. 0x06  0x010  4              71  ---  Number of ASR Events
  423. 0x06  0x018  4               0  ---  Number of Interface CRC Errors
  424. 0xff  =====  =               =  ===  == Vendor Specific Statistics (rev 1) ==
  425. 0xff  0x008  7               0  ---  Vendor Specific
  426. 0xff  0x010  7               0  ---  Vendor Specific
  427. 0xff  0x018  7               0  ---  Vendor Specific
  428.                                 |||_ C monitored condition met
  429.                                 ||__ D supports DSN
  430.                                 |___ N normalized value
  431.  
  432. Pending Defects log (GP Log 0x0c)
  433. Index                LBA    Hours
  434.     0               8800        -
  435.     1               8801        -
  436.     2               8802        -
  437.     3               8803        -
  438.     4               8804        -
  439.     5               8805        -
  440.     6               8806        -
  441.     7               8807        -
  442.     8              22984        -
  443.     9              22985        -
  444.    10              22986        -
  445.    11              22987        -
  446.    12              22988        -
  447.    13              22989        -
  448.    14              22990        -
  449.    15              22991        -
  450.    16              37176        -
  451.    17              37177        -
  452.    18              37178        -
  453.    19              37179        -
  454.    20              37180        -
  455.    21              37181        -
  456.    22              37182        -
  457.    23              37183        -
  458.    24              51368        -
  459.    25              51369        -
  460.    26              51370        -
  461.    27              51371        -
  462.    28              51372        -
  463.    29              51373        -
  464.    30              51374        -
  465. ... (25 entries not shown)
  466.  
  467. SATA Phy Event Counters (GP Log 0x11)
  468. ID      Size     Value  Description
  469. 0x0001  2            0  Command failed due to ICRC error
  470. 0x0002  2            0  R_ERR response for data FIS
  471. 0x0003  2            0  R_ERR response for device-to-host data FIS
  472. 0x0004  2            0  R_ERR response for host-to-device data FIS
  473. 0x0005  2            0  R_ERR response for non-data FIS
  474. 0x0006  2            0  R_ERR response for device-to-host non-data FIS
  475. 0x0007  2            0  R_ERR response for host-to-device non-data FIS
  476. 0x0008  2            0  Device-to-host non-data FIS retries
  477. 0x0009  2            0  Transition from drive PhyRdy to drive PhyNRdy
  478. 0x000a  2            1  Device-to-host register FISes sent due to a COMRESET
  479. 0x000b  2            0  CRC errors within host-to-device FIS
  480. 0x000d  2            0  Non-CRC errors within host-to-device FIS
  481. 0x000f  2            0  R_ERR response for host-to-device data FIS, CRC
  482. 0x0012  2            0  R_ERR response for host-to-device non-data FIS, CRC
  483. 0x8000  4           29  Vendor specific

Quellcode

Hier kannst du den Code kopieren und ihn in deinen bevorzugten Editor einfügen. PASTEBIN_DOWNLOAD_SNIPPET_EXPLAIN