NoPaste

smartctl WX32D833J256

von borsti1987
SNIPPET_DESC:
sudo smartctl -x /dev/sdX
SNIPPET_CREATION_TIME:
12.02.2024 20:26:41
SNIPPET_PRUNE_TIME:
12.05.2024 21:26:41

SNIPPET_TEXT:
  1. smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.0-17-amd64] (local build)
  2. Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
  3.  
  4. === START OF INFORMATION SECTION ===
  5. Device Model:     WDC WD60EFPX-68C5ZN0
  6. Serial Number:    WD-WX32D833J256
  7. LU WWN Device Id: 5 0014ee 26b61f48d
  8. Firmware Version: 81.00A81
  9. User Capacity:    6.001.175.126.016 bytes [6,00 TB]
  10. Sector Sizes:     512 bytes logical, 4096 bytes physical
  11. Rotation Rate:    5400 rpm
  12. Form Factor:      3.5 inches
  13. Device is:        Not in smartctl database 7.3/5319
  14. ATA Version is:   ACS-3 T13/2161-D revision 5
  15. SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 1.5 Gb/s)
  16. Local Time is:    Mon Feb 12 20:04:50 2024 CET
  17. SMART support is: Available - device has SMART capability.
  18. SMART support is: Enabled
  19. AAM feature is:   Unavailable
  20. APM feature is:   Unavailable
  21. Rd look-ahead is: Enabled
  22. Write cache is:   Disabled
  23. DSN feature is:   Unavailable
  24. ATA Security is:  Disabled, NOT FROZEN [SEC1]
  25. Wt Cache Reorder: Enabled
  26.  
  27. === START OF READ SMART DATA SECTION ===
  28. SMART overall-health self-assessment test result: PASSED
  29.  
  30. General SMART Values:
  31. Offline data collection status:  (0x00) Offline data collection activity
  32.                                         was never started.
  33.                                         Auto Offline Data Collection: Disabled.
  34. Self-test execution status:      (   0) The previous self-test routine completed
  35.                                         without error or no self-test has ever
  36.                                         been run.
  37. Total time to complete Offline
  38. data collection:                (61200) seconds.
  39. Offline data collection
  40. capabilities:                    (0x7b) SMART execute Offline immediate.
  41.                                         Auto Offline data collection on/off support.
  42.                                         Suspend Offline collection upon new
  43.                                         command.
  44.                                         Offline surface scan supported.
  45.                                         Self-test supported.
  46.                                         Conveyance Self-test supported.
  47.                                         Selective Self-test supported.
  48. SMART capabilities:            (0x0003) Saves SMART data before entering
  49.                                         power-saving mode.
  50.                                         Supports SMART auto save timer.
  51. Error logging capability:        (0x01) Error logging supported.
  52.                                         General Purpose Logging supported.
  53. Short self-test routine
  54. recommended polling time:        (   2) minutes.
  55. Extended self-test routine
  56. recommended polling time:        ( 635) minutes.
  57. Conveyance self-test routine
  58. recommended polling time:        (   5) minutes.
  59. SCT capabilities:              (0x3039) SCT Status supported.
  60.                                         SCT Error Recovery Control supported.
  61.                                         SCT Feature Control supported.
  62.                                         SCT Data Table supported.
  63.  
  64. SMART Attributes Data Structure revision number: 16
  65. Vendor Specific SMART Attributes with Thresholds:
  66. ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  67.   1 Raw_Read_Error_Rate     POSR-K   200   165   051    -    0
  68.   3 Spin_Up_Time            POS--K   225   225   021    -    3750
  69.   4 Start_Stop_Count        -O--CK   100   100   000    -    11
  70.   5 Reallocated_Sector_Ct   PO--CK   181   181   140    -    818
  71.   7 Seek_Error_Rate         -OSR-K   100   253   000    -    0
  72.   9 Power_On_Hours          -O--CK   100   100   000    -    119
  73.  10 Spin_Retry_Count        -O--CK   100   253   000    -    0
  74.  11 Calibration_Retry_Count -O--CK   100   253   000    -    0
  75.  12 Power_Cycle_Count       -O--CK   100   100   000    -    11
  76. 192 Power-Off_Retract_Count -O--CK   200   200   000    -    4
  77. 193 Load_Cycle_Count        -O--CK   200   200   000    -    25
  78. 194 Temperature_Celsius     -O---K   127   109   000    -    23
  79. 196 Reallocated_Event_Count -O--CK   194   194   000    -    6
  80. 197 Current_Pending_Sector  -O--CK   200   200   000    -    32
  81. 198 Offline_Uncorrectable   ----CK   100   253   000    -    0
  82. 199 UDMA_CRC_Error_Count    -O--CK   200   200   000    -    1
  83. 200 Multi_Zone_Error_Rate   ---R--   100   253   000    -    0
  84.                             ||||||_ K auto-keep
  85.                             |||||__ C event count
  86.                             ||||___ R error rate
  87.                             |||____ S speed/performance
  88.                             ||_____ O updated online
  89.                             |______ P prefailure warning
  90.  
  91. General Purpose Log Directory Version 1
  92. SMART           Log Directory Version 1 [multi-sector log support]
  93. Address    Access  R/W   Size  Description
  94. 0x00       GPL,SL  R/O      1  Log Directory
  95. 0x01           SL  R/O      1  Summary SMART error log
  96. 0x02           SL  R/O      5  Comprehensive SMART error log
  97. 0x03       GPL     R/O      6  Ext. Comprehensive SMART error log
  98. 0x04       GPL     R/O    256  Device Statistics log
  99. 0x04       SL      R/O    255  Device Statistics log
  100. 0x06           SL  R/O      1  SMART self-test log
  101. 0x07       GPL     R/O      1  Extended self-test log
  102. 0x09           SL  R/W      1  Selective self-test log
  103. 0x0c       GPL     R/O   2048  Pending Defects log
  104. 0x10       GPL     R/O      1  NCQ Command Error log
  105. 0x11       GPL     R/O      1  SATA Phy Event Counters log
  106. 0x24       GPL     R/O    307  Current Device Internal Status Data log
  107. 0x30       GPL,SL  R/O      9  IDENTIFY DEVICE data log
  108. 0x80-0x9f  GPL,SL  R/W     16  Host vendor specific log
  109. 0xa0-0xa7  GPL,SL  VS      16  Device vendor specific log
  110. 0xa8-0xb6  GPL,SL  VS       1  Device vendor specific log
  111. 0xb7       GPL,SL  VS      78  Device vendor specific log
  112. 0xbd       GPL,SL  VS       1  Device vendor specific log
  113. 0xc0       GPL,SL  VS       1  Device vendor specific log
  114. 0xc1       GPL     VS      93  Device vendor specific log
  115. 0xe0       GPL,SL  R/W      1  SCT Command/Status
  116. 0xe1       GPL,SL  R/W      1  SCT Data Transfer
  117.  
  118. SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
  119. Device Error Count: 2083 (device log contains only the most recent 24 errors)
  120.         CR     = Command Register
  121.         FEATR  = Features Register
  122.         COUNT  = Count (was: Sector Count) Register
  123.         LBA_48 = Upper bytes of LBA High/Mid/Low Registers ]  ATA-8
  124.         LH     = LBA High (was: Cylinder High) Register    ]   LBA
  125.         LM     = LBA Mid (was: Cylinder Low) Register      ] Register
  126.         LL     = LBA Low (was: Sector Number) Register     ]
  127.         DV     = Device (was: Device/Head) Register
  128.         DC     = Device Control Register
  129.         ER     = Error register
  130.         ST     = Status register
  131. Powered_Up_Time is measured from power on, and printed as
  132. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  133. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  134.  
  135. Error 2083 [18] occurred at disk power-on lifetime: 93 hours (3 days + 21 hours)
  136.   When the command that caused the error occurred, the device was active or idle.
  137.  
  138.   After command completion occurred, registers were:
  139.   ER -- ST COUNT  LBA_48  LH LM LL DV DC
  140.   -- -- -- == -- == == == -- -- -- -- --
  141.   40 -- 51 00 00 00 00 f9 e2 7b d8 40 00  Error: UNC at LBA = 0xf9e27bd8 = 4192369624
  142.  
  143.   Commands leading to the command that caused the error were:
  144.   CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  145.   -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  146.   60 05 40 00 f8 00 00 f9 e3 16 9a 40 08     04:10:46.508  READ FPDMA QUEUED
  147.   60 05 40 00 c0 00 00 f9 e3 11 5a 40 08     04:10:46.480  READ FPDMA QUEUED
  148.   60 05 40 00 b8 00 00 f9 e3 0c 1a 40 08     04:10:46.479  READ FPDMA QUEUED
  149.   60 05 40 00 b0 00 00 f9 e3 06 da 40 08     04:10:46.442  READ FPDMA QUEUED
  150.   60 05 40 00 a8 00 00 f9 e3 01 9a 40 08     04:10:46.439  READ FPDMA QUEUED
  151.  
  152. Error 2082 [17] occurred at disk power-on lifetime: 93 hours (3 days + 21 hours)
  153.   When the command that caused the error occurred, the device was active or idle.
  154.  
  155.   After command completion occurred, registers were:
  156.   ER -- ST COUNT  LBA_48  LH LM LL DV DC
  157.   -- -- -- == -- == == == -- -- -- -- --
  158.   40 -- 51 00 00 00 00 f9 e0 5c 40 40 00  Error: UNC at LBA = 0xf9e05c40 = 4192230464
  159.  
  160.   Commands leading to the command that caused the error were:
  161.   CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  162.   -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  163.   60 00 08 00 90 00 00 f9 e0 5d 1a 40 08     04:10:32.775  READ FPDMA QUEUED
  164.   60 00 08 00 88 00 00 f9 e0 5d 12 40 08     04:10:32.775  READ FPDMA QUEUED
  165.   60 00 08 00 80 00 00 f9 e0 5d 0a 40 08     04:10:32.775  READ FPDMA QUEUED
  166.   60 00 08 00 78 00 00 f9 e0 5d 02 40 08     04:10:32.775  READ FPDMA QUEUED
  167.   60 00 08 00 68 00 00 f9 e0 5c fa 40 08     04:10:32.775  READ FPDMA QUEUED
  168.  
  169. Error 2081 [16] occurred at disk power-on lifetime: 93 hours (3 days + 21 hours)
  170.   When the command that caused the error occurred, the device was active or idle.
  171.  
  172.   After command completion occurred, registers were:
  173.   ER -- ST COUNT  LBA_48  LH LM LL DV DC
  174.   -- -- -- == -- == == == -- -- -- -- --
  175.   40 -- 51 00 00 00 00 f9 de 5e 78 40 00  Error: UNC at LBA = 0xf9de5e78 = 4192099960
  176.  
  177.   Commands leading to the command that caused the error were:
  178.   CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  179.   -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  180.   60 00 08 00 50 00 00 f9 de 5f 6a 40 08     04:10:30.163  READ FPDMA QUEUED
  181.   60 00 08 00 38 00 00 f9 de 5f 62 40 08     04:10:30.163  READ FPDMA QUEUED
  182.   60 00 08 00 30 00 00 f9 de 5f 5a 40 08     04:10:30.163  READ FPDMA QUEUED
  183.   60 00 08 00 28 00 00 f9 de 5f 52 40 08     04:10:30.163  READ FPDMA QUEUED
  184.   60 00 08 00 20 00 00 f9 de 5f 4a 40 08     04:10:30.163  READ FPDMA QUEUED
  185.  
  186. Error 2080 [15] occurred at disk power-on lifetime: 93 hours (3 days + 21 hours)
  187.   When the command that caused the error occurred, the device was active or idle.
  188.  
  189.   After command completion occurred, registers were:
  190.   ER -- ST COUNT  LBA_48  LH LM LL DV DC
  191.   -- -- -- == -- == == == -- -- -- -- --
  192.   40 -- 51 00 00 00 00 f9 de 2a 7a 40 00  Error: UNC at LBA = 0xf9de2a7a = 4192086650
  193.  
  194.   Commands leading to the command that caused the error were:
  195.   CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  196.   -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  197.   60 00 08 00 00 00 00 f9 de 2a a2 40 08     04:10:26.859  READ FPDMA QUEUED
  198.   60 00 08 00 f8 00 00 f9 de 2a ba 40 08     04:10:26.859  READ FPDMA QUEUED
  199.   60 00 08 00 f0 00 00 f9 de 2a 9a 40 08     04:10:26.859  READ FPDMA QUEUED
  200.   60 00 08 00 e8 00 00 f9 de 2a da 40 08     04:10:26.859  READ FPDMA QUEUED
  201.   60 00 08 00 e0 00 00 f9 de 2b 22 40 08     04:10:26.859  READ FPDMA QUEUED
  202.  
  203. Error 2079 [14] occurred at disk power-on lifetime: 93 hours (3 days + 21 hours)
  204.   When the command that caused the error occurred, the device was active or idle.
  205.  
  206.   After command completion occurred, registers were:
  207.   ER -- ST COUNT  LBA_48  LH LM LL DV DC
  208.   -- -- -- == -- == == == -- -- -- -- --
  209.   40 -- 51 00 00 00 00 f9 df 3a 40 40 00  Error: UNC at LBA = 0xf9df3a40 = 4192156224
  210.  
  211.   Commands leading to the command that caused the error were:
  212.   CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  213.   -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  214.   60 00 08 00 f8 00 00 f9 df 3a 52 40 08     04:10:24.266  READ FPDMA QUEUED
  215.   60 00 08 00 f0 00 00 f9 de 2a b2 40 08     04:10:24.266  READ FPDMA QUEUED
  216.   60 00 08 00 e8 00 00 f9 de 2a 7a 40 08     04:10:24.266  READ FPDMA QUEUED
  217.   60 00 08 00 d8 00 00 f9 de 2a fa 40 08     04:10:24.266  READ FPDMA QUEUED
  218.   60 00 08 00 d0 00 00 f9 df 3a 4a 40 08     04:10:24.266  READ FPDMA QUEUED
  219.  
  220. Error 2078 [13] occurred at disk power-on lifetime: 93 hours (3 days + 21 hours)
  221.   When the command that caused the error occurred, the device was active or idle.
  222.  
  223.   After command completion occurred, registers were:
  224.   ER -- ST COUNT  LBA_48  LH LM LL DV DC
  225.   -- -- -- == -- == == == -- -- -- -- --
  226.   40 -- 51 00 00 00 00 f9 de 2a 78 40 00  Error: UNC at LBA = 0xf9de2a78 = 4192086648
  227.  
  228.   Commands leading to the command that caused the error were:
  229.   CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  230.   -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  231.   60 00 08 00 b0 00 00 f9 de 2b 6a 40 08     04:10:21.664  READ FPDMA QUEUED
  232.   60 00 08 00 a8 00 00 f9 de 2b 62 40 08     04:10:21.664  READ FPDMA QUEUED
  233.   60 00 08 00 30 00 00 f9 de 2b 5a 40 08     04:10:21.619  READ FPDMA QUEUED
  234.   60 00 08 00 00 00 00 f9 de 2b 52 40 08     04:10:21.619  READ FPDMA QUEUED
  235.   60 00 08 00 f0 00 00 f9 de 2b 4a 40 08     04:10:21.615  READ FPDMA QUEUED
  236.  
  237. Error 2077 [12] occurred at disk power-on lifetime: 93 hours (3 days + 21 hours)
  238.   When the command that caused the error occurred, the device was active or idle.
  239.  
  240.   After command completion occurred, registers were:
  241.   ER -- ST COUNT  LBA_48  LH LM LL DV DC
  242.   -- -- -- == -- == == == -- -- -- -- --
  243.   40 -- 51 00 00 00 00 f9 e0 5c 40 40 00  Error: UNC at LBA = 0xf9e05c40 = 4192230464
  244.  
  245.   Commands leading to the command that caused the error were:
  246.   CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  247.   -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  248.   60 05 40 00 98 00 00 f9 e0 fa e2 40 08     04:10:13.946  READ FPDMA QUEUED
  249.   60 05 40 00 d0 00 00 f9 e0 f5 a2 40 08     04:10:13.946  READ FPDMA QUEUED
  250.   60 05 40 00 10 00 00 f9 e0 f0 62 40 08     04:10:13.945  READ FPDMA QUEUED
  251.   60 05 40 00 18 00 00 f9 e0 eb 22 40 08     04:10:13.918  READ FPDMA QUEUED
  252.   60 05 40 00 20 00 00 f9 e0 e5 e2 40 08     04:10:13.909  READ FPDMA QUEUED
  253.  
  254. Error 2076 [11] occurred at disk power-on lifetime: 93 hours (3 days + 21 hours)
  255.   When the command that caused the error occurred, the device was active or idle.
  256.  
  257.   After command completion occurred, registers were:
  258.   ER -- ST COUNT  LBA_48  LH LM LL DV DC
  259.   -- -- -- == -- == == == -- -- -- -- --
  260.   40 -- 51 00 00 00 00 f9 de 5e 78 40 00  Error: UNC at LBA = 0xf9de5e78 = 4192099960
  261.  
  262.   Commands leading to the command that caused the error were:
  263.   CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  264.   -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  265.   60 05 40 00 b8 00 00 f9 df a0 62 40 08     04:10:08.204  READ FPDMA QUEUED
  266.   60 05 40 00 b0 00 00 f9 df 9b 22 40 08     04:10:08.204  READ FPDMA QUEUED
  267.   60 05 40 00 28 00 00 f9 df 95 e2 40 08     04:10:08.201  READ FPDMA QUEUED
  268.   60 05 40 00 10 00 00 f9 df 51 a2 40 08     04:10:08.187  READ FPDMA QUEUED
  269.   60 05 40 00 f8 00 00 f9 df 4c 62 40 08     04:10:08.187  READ FPDMA QUEUED
  270.  
  271. SMART Extended Self-test Log Version: 1 (1 sectors)
  272. Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
  273. # 1  Short offline       Completed: read failure       90%       119         4140921728
  274. # 2  Short offline       Completed: read failure       90%       119         4138051880
  275. # 3  Short offline       Completed: read failure       90%       118         4137790872
  276. # 4  Conveyance offline  Completed: read failure       90%       118         4137790872
  277. # 5  Extended offline    Completed: read failure       90%       118         4137790872
  278. # 6  Short offline       Completed: read failure       90%        89         4140921728
  279.  
  280. SMART Selective self-test log data structure revision number 1
  281.  SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
  282.     1        0        0  Not_testing
  283.     2        0        0  Not_testing
  284.     3        0        0  Not_testing
  285.     4        0        0  Not_testing
  286.     5        0        0  Not_testing
  287. Selective self-test flags (0x0):
  288.   After scanning selected spans, do NOT read-scan remainder of disk.
  289. If Selective self-test is pending on power-up, resume after 0 minute delay.
  290.  
  291. SCT Status Version:                  3
  292. SCT Version (vendor specific):       258 (0x0102)
  293. Device State:                        Active (0)
  294. Current Temperature:                    23 Celsius
  295. Power Cycle Min/Max Temperature:     23/23 Celsius
  296. Lifetime    Min/Max Temperature:     19/41 Celsius
  297. Under/Over Temperature Limit Count:   0/0
  298. Vendor specific:
  299. 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  300. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  301.  
  302. SCT Temperature History Version:     2
  303. Temperature Sampling Period:         1 minute
  304. Temperature Logging Interval:        1 minute
  305. Min/Max recommended Temperature:      0/65 Celsius
  306. Min/Max Temperature Limit:           -41/85 Celsius
  307. Temperature History Size (Index):    478 (421)
  308.  
  309. Index    Estimated Time   Temperature Celsius
  310.  422    2024-02-12 12:07    30  ***********
  311.  ...    ..(376 skipped).    ..  ***********
  312.  321    2024-02-12 18:24    30  ***********
  313.  322    2024-02-12 18:25     ?  -
  314.  323    2024-02-12 18:26    26  *******
  315.  324    2024-02-12 18:27    26  *******
  316.  325    2024-02-12 18:28    26  *******
  317.  326    2024-02-12 18:29    27  ********
  318.  327    2024-02-12 18:30    27  ********
  319.  328    2024-02-12 18:31    27  ********
  320.  329    2024-02-12 18:32    28  *********
  321.  330    2024-02-12 18:33    28  *********
  322.  331    2024-02-12 18:34    29  **********
  323.  332    2024-02-12 18:35    29  **********
  324.  333    2024-02-12 18:36    28  *********
  325.  334    2024-02-12 18:37    29  **********
  326.  335    2024-02-12 18:38    29  **********
  327.  336    2024-02-12 18:39     ?  -
  328.  337    2024-02-12 18:40    28  *********
  329.  338    2024-02-12 18:41    27  ********
  330.  339    2024-02-12 18:42    28  *********
  331.  ...    ..(  3 skipped).    ..  *********
  332.  343    2024-02-12 18:46    28  *********
  333.  344    2024-02-12 18:47    29  **********
  334.  ...    ..( 18 skipped).    ..  **********
  335.  363    2024-02-12 19:06    29  **********
  336.  364    2024-02-12 19:07    30  ***********
  337.  ...    ..(  8 skipped).    ..  ***********
  338.  373    2024-02-12 19:16    30  ***********
  339.  374    2024-02-12 19:17    31  ************
  340.  375    2024-02-12 19:18    31  ************
  341.  376    2024-02-12 19:19    31  ************
  342.  377    2024-02-12 19:20     ?  -
  343.  378    2024-02-12 19:21    31  ************
  344.  ...    ..(  9 skipped).    ..  ************
  345.  388    2024-02-12 19:31    31  ************
  346.  389    2024-02-12 19:32    32  *************
  347.  ...    ..(  6 skipped).    ..  *************
  348.  396    2024-02-12 19:39    32  *************
  349.  397    2024-02-12 19:40    33  **************
  350.  ...    ..( 17 skipped).    ..  **************
  351.  415    2024-02-12 19:58    33  **************
  352.  416    2024-02-12 19:59     ?  -
  353.  417    2024-02-12 20:00    21  **
  354.  418    2024-02-12 20:01    21  **
  355.  419    2024-02-12 20:02    22  ***
  356.  420    2024-02-12 20:03     ?  -
  357.  421    2024-02-12 20:04    23  ****
  358.  
  359. SCT Error Recovery Control:
  360.            Read:     70 (7,0 seconds)
  361.           Write:     70 (7,0 seconds)
  362.  
  363. Device Statistics (GP Log 0x04)
  364. Page  Offset Size        Value Flags Description
  365. 0x01  =====  =               =  ===  == General Statistics (rev 3) ==
  366. 0x01  0x008  4              11  ---  Lifetime Power-On Resets
  367. 0x01  0x010  4             119  ---  Power-on Hours
  368. 0x01  0x018  6     11721798421  ---  Logical Sectors Written
  369. 0x01  0x020  6         9102975  ---  Number of Write Commands
  370. 0x01  0x028  6     39419565408  ---  Logical Sectors Read
  371. 0x01  0x030  6        31424066  ---  Number of Read Commands
  372. 0x01  0x038  6       428400000  ---  Date and Time TimeStamp
  373. 0x02  =====  =               =  ===  == Free-Fall Statistics (rev 1) ==
  374. 0x02  0x010  4               0  ---  Overlimit Shock Events
  375. 0x03  =====  =               =  ===  == Rotating Media Statistics (rev 1) ==
  376. 0x03  0x008  4             119  ---  Spindle Motor Power-on Hours
  377. 0x03  0x010  4              66  ---  Head Flying Hours
  378. 0x03  0x018  4              30  ---  Head Load Events
  379. 0x03  0x020  4             818  ---  Number of Reallocated Logical Sectors
  380. 0x03  0x028  4           50464  ---  Read Recovery Attempts
  381. 0x03  0x030  4               0  ---  Number of Mechanical Start Failures
  382. 0x03  0x038  4           16016  ---  Number of Realloc. Candidate Logical Sectors
  383. 0x03  0x040  4               4  ---  Number of High Priority Unload Events
  384. 0x04  =====  =               =  ===  == General Errors Statistics (rev 1) ==
  385. 0x04  0x008  4            2009  ---  Number of Reported Uncorrectable Errors
  386. 0x04  0x010  4               0  ---  Resets Between Cmd Acceptance and Completion
  387. 0x05  =====  =               =  ===  == Temperature Statistics (rev 1) ==
  388. 0x05  0x008  1              23  ---  Current Temperature
  389. 0x05  0x010  1              31  ---  Average Short Term Temperature
  390. 0x05  0x018  1               -  ---  Average Long Term Temperature
  391. 0x05  0x020  1              41  ---  Highest Temperature
  392. 0x05  0x028  1              25  ---  Lowest Temperature
  393. 0x05  0x030  1              37  ---  Highest Average Short Term Temperature
  394. 0x05  0x038  1              31  ---  Lowest Average Short Term Temperature
  395. 0x05  0x040  1               -  ---  Highest Average Long Term Temperature
  396. 0x05  0x048  1               -  ---  Lowest Average Long Term Temperature
  397. 0x05  0x050  4               0  ---  Time in Over-Temperature
  398. 0x05  0x058  1              65  ---  Specified Maximum Operating Temperature
  399. 0x05  0x060  4               0  ---  Time in Under-Temperature
  400. 0x05  0x068  1               0  ---  Specified Minimum Operating Temperature
  401. 0x06  =====  =               =  ===  == Transport Statistics (rev 1) ==
  402. 0x06  0x008  4              49  ---  Number of Hardware Resets
  403. 0x06  0x010  4              24  ---  Number of ASR Events
  404. 0x06  0x018  4               1  ---  Number of Interface CRC Errors
  405. 0xff  =====  =               =  ===  == Vendor Specific Statistics (rev 1) ==
  406. 0xff  0x008  7               0  ---  Vendor Specific
  407. 0xff  0x010  7               0  ---  Vendor Specific
  408. 0xff  0x018  7               0  ---  Vendor Specific
  409.                                 |||_ C monitored condition met
  410.                                 ||__ D supports DSN
  411.                                 |___ N normalized value
  412.  
  413. Pending Defects log (GP Log 0x0c)
  414. Index                LBA    Hours
  415.     0         4134499336        -
  416.     1         4134499337        -
  417.     2         4134499338        -
  418.     3         4134499339        -
  419.     4         4134499340        -
  420.     5         4134499341        -
  421.     6         4134499342        -
  422.     7         4134499343        -
  423.     8         4134844680        -
  424.     9         4134844681        -
  425.    10         4134844682        -
  426.    11         4134844683        -
  427.    12         4134844684        -
  428.    13         4134844685        -
  429.    14         4134844686        -
  430.    15         4134844687        -
  431.    16         4137790872        -
  432.    17         4137790873        -
  433.    18         4137790874        -
  434.    19         4137790875        -
  435.    20         4137790876        -
  436.    21         4137790877        -
  437.    22         4137790878        -
  438.    23         4137790879        -
  439.    24         4137799528        -
  440.    25         4137799529        -
  441.    26         4137799530        -
  442.    27         4137799531        -
  443.    28         4137799532        -
  444.    29         4137799533        -
  445.    30         4137799534        -
  446. ... (225 entries not shown)
  447.  
  448. SATA Phy Event Counters (GP Log 0x11)
  449. ID      Size     Value  Description
  450. 0x0001  2            0  Command failed due to ICRC error
  451. 0x0002  2            0  R_ERR response for data FIS
  452. 0x0003  2            0  R_ERR response for device-to-host data FIS
  453. 0x0004  2            0  R_ERR response for host-to-device data FIS
  454. 0x0005  2            0  R_ERR response for non-data FIS
  455. 0x0006  2            0  R_ERR response for device-to-host non-data FIS
  456. 0x0007  2            0  R_ERR response for host-to-device non-data FIS
  457. 0x0008  2            0  Device-to-host non-data FIS retries
  458. 0x0009  2            0  Transition from drive PhyRdy to drive PhyNRdy
  459. 0x000a  2            1  Device-to-host register FISes sent due to a COMRESET
  460. 0x000b  2            0  CRC errors within host-to-device FIS
  461. 0x000d  2            0  Non-CRC errors within host-to-device FIS
  462. 0x000f  2            0  R_ERR response for host-to-device data FIS, CRC
  463. 0x0012  2            0  R_ERR response for host-to-device non-data FIS, CRC
  464. 0x8000  4            8  Vendor specific

Quellcode

Hier kannst du den Code kopieren und ihn in deinen bevorzugten Editor einfügen. PASTEBIN_DOWNLOAD_SNIPPET_EXPLAIN

Verlinken

URL: alles markieren
https://nopaste.debianforum.de/42113

BBCode: alles markieren
[NP]42113[/NP]

LATEST_SNIPPETS