NoPaste

smartctl WX32D83955E7

von borsti1987
SNIPPET_DESC:
sudo smartctl -x /dev/sdX
SNIPPET_CREATION_TIME:
12.02.2024 20:27:54
SNIPPET_PRUNE_TIME:
12.05.2024 21:27:54

SNIPPET_TEXT:
  1. smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.0-17-amd64] (local build)
  2. Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
  3.  
  4. === START OF INFORMATION SECTION ===
  5. Device Model:     WDC WD60EFPX-68C5ZN0
  6. Serial Number:    WD-WX32D83955E7
  7. LU WWN Device Id: 5 0014ee 2160c9a16
  8. Firmware Version: 81.00A81
  9. User Capacity:    6.001.175.126.016 bytes [6,00 TB]
  10. Sector Sizes:     512 bytes logical, 4096 bytes physical
  11. Rotation Rate:    5400 rpm
  12. Form Factor:      3.5 inches
  13. Device is:        Not in smartctl database 7.3/5319
  14. ATA Version is:   ACS-3 T13/2161-D revision 5
  15. SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)
  16. Local Time is:    Mon Feb 12 20:09:33 2024 CET
  17. SMART support is: Available - device has SMART capability.
  18. SMART support is: Enabled
  19. AAM feature is:   Unavailable
  20. APM feature is:   Unavailable
  21. Rd look-ahead is: Enabled
  22. Write cache is:   Disabled
  23. DSN feature is:   Unavailable
  24. ATA Security is:  Disabled, NOT FROZEN [SEC1]
  25. Wt Cache Reorder: Enabled
  26.  
  27. === START OF READ SMART DATA SECTION ===
  28. SMART overall-health self-assessment test result: PASSED
  29.  
  30. General SMART Values:
  31. Offline data collection status:  (0x00) Offline data collection activity
  32.                                         was never started.
  33.                                         Auto Offline Data Collection: Disabled.
  34. Self-test execution status:      (   0) The previous self-test routine completed
  35.                                         without error or no self-test has ever
  36.                                         been run.
  37. Total time to complete Offline
  38. data collection:                (60840) seconds.
  39. Offline data collection
  40. capabilities:                    (0x7b) SMART execute Offline immediate.
  41.                                         Auto Offline data collection on/off support.
  42.                                         Suspend Offline collection upon new
  43.                                         command.
  44.                                         Offline surface scan supported.
  45.                                         Self-test supported.
  46.                                         Conveyance Self-test supported.
  47.                                         Selective Self-test supported.
  48. SMART capabilities:            (0x0003) Saves SMART data before entering
  49.                                         power-saving mode.
  50.                                         Supports SMART auto save timer.
  51. Error logging capability:        (0x01) Error logging supported.
  52.                                         General Purpose Logging supported.
  53. Short self-test routine
  54. recommended polling time:        (   2) minutes.
  55. Extended self-test routine
  56. recommended polling time:        ( 632) minutes.
  57. Conveyance self-test routine
  58. recommended polling time:        (   5) minutes.
  59. SCT capabilities:              (0x3039) SCT Status supported.
  60.                                         SCT Error Recovery Control supported.
  61.                                         SCT Feature Control supported.
  62.                                         SCT Data Table supported.
  63.  
  64. SMART Attributes Data Structure revision number: 16
  65. Vendor Specific SMART Attributes with Thresholds:
  66. ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  67.   1 Raw_Read_Error_Rate     POSR-K   199   181   051    -    50
  68.   3 Spin_Up_Time            POS--K   232   232   021    -    3391
  69.   4 Start_Stop_Count        -O--CK   100   100   000    -    6
  70.   5 Reallocated_Sector_Ct   PO--CK   181   181   140    -    822
  71.   7 Seek_Error_Rate         -OSR-K   100   253   000    -    0
  72.   9 Power_On_Hours          -O--CK   100   100   000    -    89
  73.  10 Spin_Retry_Count        -O--CK   100   253   000    -    0
  74.  11 Calibration_Retry_Count -O--CK   100   253   000    -    0
  75.  12 Power_Cycle_Count       -O--CK   100   100   000    -    6
  76. 192 Power-Off_Retract_Count -O--CK   200   200   000    -    4
  77. 193 Load_Cycle_Count        -O--CK   200   200   000    -    9
  78. 194 Temperature_Celsius     -O---K   127   106   000    -    23
  79. 196 Reallocated_Event_Count -O--CK   190   190   000    -    10
  80. 197 Current_Pending_Sector  -O--CK   200   200   000    -    65
  81. 198 Offline_Uncorrectable   ----CK   100   253   000    -    0
  82. 199 UDMA_CRC_Error_Count    -O--CK   200   200   000    -    0
  83. 200 Multi_Zone_Error_Rate   ---R--   100   253   000    -    0
  84.                             ||||||_ K auto-keep
  85.                             |||||__ C event count
  86.                             ||||___ R error rate
  87.                             |||____ S speed/performance
  88.                             ||_____ O updated online
  89.                             |______ P prefailure warning
  90.  
  91. General Purpose Log Directory Version 1
  92. SMART           Log Directory Version 1 [multi-sector log support]
  93. Address    Access  R/W   Size  Description
  94. 0x00       GPL,SL  R/O      1  Log Directory
  95. 0x01           SL  R/O      1  Summary SMART error log
  96. 0x02           SL  R/O      5  Comprehensive SMART error log
  97. 0x03       GPL     R/O      6  Ext. Comprehensive SMART error log
  98. 0x04       GPL     R/O    256  Device Statistics log
  99. 0x04       SL      R/O    255  Device Statistics log
  100. 0x06           SL  R/O      1  SMART self-test log
  101. 0x07       GPL     R/O      1  Extended self-test log
  102. 0x09           SL  R/W      1  Selective self-test log
  103. 0x0c       GPL     R/O   2048  Pending Defects log
  104. 0x10       GPL     R/O      1  NCQ Command Error log
  105. 0x11       GPL     R/O      1  SATA Phy Event Counters log
  106. 0x24       GPL     R/O    307  Current Device Internal Status Data log
  107. 0x30       GPL,SL  R/O      9  IDENTIFY DEVICE data log
  108. 0x80-0x9f  GPL,SL  R/W     16  Host vendor specific log
  109. 0xa0-0xa7  GPL,SL  VS      16  Device vendor specific log
  110. 0xa8-0xb6  GPL,SL  VS       1  Device vendor specific log
  111. 0xb7       GPL,SL  VS      78  Device vendor specific log
  112. 0xbd       GPL,SL  VS       1  Device vendor specific log
  113. 0xc0       GPL,SL  VS       1  Device vendor specific log
  114. 0xc1       GPL     VS      93  Device vendor specific log
  115. 0xe0       GPL,SL  R/W      1  SCT Command/Status
  116. 0xe1       GPL,SL  R/W      1  SCT Data Transfer
  117.  
  118. SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
  119. Device Error Count: 39484 (device log contains only the most recent 24 errors)
  120.         CR     = Command Register
  121.         FEATR  = Features Register
  122.         COUNT  = Count (was: Sector Count) Register
  123.         LBA_48 = Upper bytes of LBA High/Mid/Low Registers ]  ATA-8
  124.         LH     = LBA High (was: Cylinder High) Register    ]   LBA
  125.         LM     = LBA Mid (was: Cylinder Low) Register      ] Register
  126.         LL     = LBA Low (was: Sector Number) Register     ]
  127.         DV     = Device (was: Device/Head) Register
  128.         DC     = Device Control Register
  129.         ER     = Error register
  130.         ST     = Status register
  131. Powered_Up_Time is measured from power on, and printed as
  132. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  133. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  134.  
  135. Error 39484 [11] occurred at disk power-on lifetime: 89 hours (3 days + 17 hours)
  136.   When the command that caused the error occurred, the device was active or idle.
  137.  
  138.   After command completion occurred, registers were:
  139.   ER -- ST COUNT  LBA_48  LH LM LL DV DC
  140.   -- -- -- == -- == == == -- -- -- -- --
  141.   04 -- 61 00 00 00 00 00 00 00 00 a0 00
  142.  
  143.   Commands leading to the command that caused the error were:
  144.   CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  145.   -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  146.   e0 00 00 00 00 00 00 00 00 00 00 a0 08     18:40:11.305  STANDBY IMMEDIATE
  147.   ef 00 10 00 02 00 00 00 00 00 00 a0 08     18:40:10.582  SET FEATURES [Enable SATA feature]
  148.   ec 00 00 00 00 00 00 00 00 00 00 a0 08     18:40:10.516  IDENTIFY DEVICE
  149.   ef 00 03 00 46 00 00 00 00 00 00 a0 08     18:40:10.516  SET FEATURES [Set transfer mode]
  150.   ef 00 10 00 02 00 00 00 00 00 00 a0 08     18:40:10.515  SET FEATURES [Enable SATA feature]
  151.  
  152. Error 39483 [10] occurred at disk power-on lifetime: 89 hours (3 days + 17 hours)
  153.   When the command that caused the error occurred, the device was active or idle.
  154.  
  155.   After command completion occurred, registers were:
  156.   ER -- ST COUNT  LBA_48  LH LM LL DV DC
  157.   -- -- -- == -- == == == -- -- -- -- --
  158.   04 -- 61 00 02 00 00 00 00 00 00 a0 00  Device Fault; Error: ABRT
  159.  
  160.   Commands leading to the command that caused the error were:
  161.   CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  162.   -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  163.   ef 00 10 00 02 00 00 00 00 00 00 a0 08     18:40:10.582  SET FEATURES [Enable SATA feature]
  164.   ec 00 00 00 00 00 00 00 00 00 00 a0 08     18:40:10.516  IDENTIFY DEVICE
  165.   ef 00 03 00 46 00 00 00 00 00 00 a0 08     18:40:10.516  SET FEATURES [Set transfer mode]
  166.   ef 00 10 00 02 00 00 00 00 00 00 a0 08     18:40:10.515  SET FEATURES [Enable SATA feature]
  167.   ec 00 00 00 00 00 00 00 00 00 00 a0 08     18:40:10.496  IDENTIFY DEVICE
  168.  
  169. Error 39482 [9] occurred at disk power-on lifetime: 89 hours (3 days + 17 hours)
  170.   When the command that caused the error occurred, the device was active or idle.
  171.  
  172.   After command completion occurred, registers were:
  173.   ER -- ST COUNT  LBA_48  LH LM LL DV DC
  174.   -- -- -- == -- == == == -- -- -- -- --
  175.   04 -- 61 00 46 00 00 00 00 00 00 a0 00  Device Fault; Error: ABRT
  176.  
  177.   Commands leading to the command that caused the error were:
  178.   CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  179.   -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  180.   ef 00 03 00 46 00 00 00 00 00 00 a0 08     18:40:10.516  SET FEATURES [Set transfer mode]
  181.   ef 00 10 00 02 00 00 00 00 00 00 a0 08     18:40:10.515  SET FEATURES [Enable SATA feature]
  182.   ec 00 00 00 00 00 00 00 00 00 00 a0 08     18:40:10.496  IDENTIFY DEVICE
  183.   25 00 00 00 08 00 02 ba a0 f3 a2 e0 08     18:40:10.453  READ DMA EXT
  184.   ef 00 10 00 02 00 00 00 00 00 00 a0 08     18:40:10.449  SET FEATURES [Enable SATA feature]
  185.  
  186. Error 39481 [8] occurred at disk power-on lifetime: 89 hours (3 days + 17 hours)
  187.   When the command that caused the error occurred, the device was active or idle.
  188.  
  189.   After command completion occurred, registers were:
  190.   ER -- ST COUNT  LBA_48  LH LM LL DV DC
  191.   -- -- -- == -- == == == -- -- -- -- --
  192.   04 -- 61 00 02 00 00 00 00 00 00 a0 00  Device Fault; Error: ABRT
  193.  
  194.   Commands leading to the command that caused the error were:
  195.   CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  196.   -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  197.   ef 00 10 00 02 00 00 00 00 00 00 a0 08     18:40:10.515  SET FEATURES [Enable SATA feature]
  198.   ec 00 00 00 00 00 00 00 00 00 00 a0 08     18:40:10.496  IDENTIFY DEVICE
  199.   25 00 00 00 08 00 02 ba a0 f3 a2 e0 08     18:40:10.453  READ DMA EXT
  200.   ef 00 10 00 02 00 00 00 00 00 00 a0 08     18:40:10.449  SET FEATURES [Enable SATA feature]
  201.   ec 00 00 00 00 00 00 00 00 00 00 a0 08     18:40:10.384  IDENTIFY DEVICE
  202.  
  203. Error 39480 [7] occurred at disk power-on lifetime: 89 hours (3 days + 17 hours)
  204.   When the command that caused the error occurred, the device was active or idle.
  205.  
  206.   After command completion occurred, registers were:
  207.   ER -- ST COUNT  LBA_48  LH LM LL DV DC
  208.   -- -- -- == -- == == == -- -- -- -- --
  209.   04 -- 61 00 08 00 02 ba a0 f3 a2 e0 00  Device Fault; Error: ABRT 8 sectors at LBA = 0x2baa0f3a2 = 11721044898
  210.  
  211.   Commands leading to the command that caused the error were:
  212.   CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  213.   -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  214.   25 00 00 00 08 00 02 ba a0 f3 a2 e0 08     18:40:10.453  READ DMA EXT
  215.   ef 00 10 00 02 00 00 00 00 00 00 a0 08     18:40:10.449  SET FEATURES [Enable SATA feature]
  216.   ec 00 00 00 00 00 00 00 00 00 00 a0 08     18:40:10.384  IDENTIFY DEVICE
  217.   ef 00 03 00 46 00 00 00 00 00 00 a0 08     18:40:10.384  SET FEATURES [Set transfer mode]
  218.   ef 00 10 00 02 00 00 00 00 00 00 a0 08     18:40:10.382  SET FEATURES [Enable SATA feature]
  219.  
  220. Error 39479 [6] occurred at disk power-on lifetime: 89 hours (3 days + 17 hours)
  221.   When the command that caused the error occurred, the device was active or idle.
  222.  
  223.   After command completion occurred, registers were:
  224.   ER -- ST COUNT  LBA_48  LH LM LL DV DC
  225.   -- -- -- == -- == == == -- -- -- -- --
  226.   04 -- 61 00 02 00 00 00 00 00 00 a0 00  Device Fault; Error: ABRT
  227.  
  228.   Commands leading to the command that caused the error were:
  229.   CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  230.   -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  231.   ef 00 10 00 02 00 00 00 00 00 00 a0 08     18:40:10.449  SET FEATURES [Enable SATA feature]
  232.   ec 00 00 00 00 00 00 00 00 00 00 a0 08     18:40:10.384  IDENTIFY DEVICE
  233.   ef 00 03 00 46 00 00 00 00 00 00 a0 08     18:40:10.384  SET FEATURES [Set transfer mode]
  234.   ef 00 10 00 02 00 00 00 00 00 00 a0 08     18:40:10.382  SET FEATURES [Enable SATA feature]
  235.   ec 00 00 00 00 00 00 00 00 00 00 a0 08     18:40:10.376  IDENTIFY DEVICE
  236.  
  237. Error 39478 [5] occurred at disk power-on lifetime: 89 hours (3 days + 17 hours)
  238.   When the command that caused the error occurred, the device was active or idle.
  239.  
  240.   After command completion occurred, registers were:
  241.   ER -- ST COUNT  LBA_48  LH LM LL DV DC
  242.   -- -- -- == -- == == == -- -- -- -- --
  243.   04 -- 61 00 46 00 00 00 00 00 00 a0 00  Device Fault; Error: ABRT
  244.  
  245.   Commands leading to the command that caused the error were:
  246.   CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  247.   -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  248.   ef 00 03 00 46 00 00 00 00 00 00 a0 08     18:40:10.384  SET FEATURES [Set transfer mode]
  249.   ef 00 10 00 02 00 00 00 00 00 00 a0 08     18:40:10.382  SET FEATURES [Enable SATA feature]
  250.   ec 00 00 00 00 00 00 00 00 00 00 a0 08     18:40:10.376  IDENTIFY DEVICE
  251.   c8 00 00 00 00 00 00 00 00 00 00 e0 08     18:40:10.318  READ DMA
  252.   ef 00 10 00 02 00 00 00 00 00 00 a0 08     18:40:10.315  SET FEATURES [Enable SATA feature]
  253.  
  254. Error 39477 [4] occurred at disk power-on lifetime: 89 hours (3 days + 17 hours)
  255.   When the command that caused the error occurred, the device was active or idle.
  256.  
  257.   After command completion occurred, registers were:
  258.   ER -- ST COUNT  LBA_48  LH LM LL DV DC
  259.   -- -- -- == -- == == == -- -- -- -- --
  260.   04 -- 61 00 02 00 00 00 00 00 00 a0 00  Device Fault; Error: ABRT
  261.  
  262.   Commands leading to the command that caused the error were:
  263.   CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  264.   -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  265.   ef 00 10 00 02 00 00 00 00 00 00 a0 08     18:40:10.382  SET FEATURES [Enable SATA feature]
  266.   ec 00 00 00 00 00 00 00 00 00 00 a0 08     18:40:10.376  IDENTIFY DEVICE
  267.   c8 00 00 00 00 00 00 00 00 00 00 e0 08     18:40:10.318  READ DMA
  268.   ef 00 10 00 02 00 00 00 00 00 00 a0 08     18:40:10.315  SET FEATURES [Enable SATA feature]
  269.   ec 00 00 00 00 00 00 00 00 00 00 a0 08     18:40:10.255  IDENTIFY DEVICE
  270.  
  271. SMART Extended Self-test Log Version: 1 (1 sectors)
  272. Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
  273. # 1  Short offline       Completed: read failure       90%        89         3258494744
  274.  
  275. SMART Selective self-test log data structure revision number 1
  276.  SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
  277.     1        0        0  Not_testing
  278.     2        0        0  Not_testing
  279.     3        0        0  Not_testing
  280.     4        0        0  Not_testing
  281.     5        0        0  Not_testing
  282. Selective self-test flags (0x0):
  283.   After scanning selected spans, do NOT read-scan remainder of disk.
  284. If Selective self-test is pending on power-up, resume after 0 minute delay.
  285.  
  286. SCT Status Version:                  3
  287. SCT Version (vendor specific):       258 (0x0102)
  288. Device State:                        Active (0)
  289. Current Temperature:                    23 Celsius
  290. Power Cycle Min/Max Temperature:     23/23 Celsius
  291. Lifetime    Min/Max Temperature:     18/44 Celsius
  292. Under/Over Temperature Limit Count:   0/0
  293. Vendor specific:
  294. 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  295. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  296.  
  297. SCT Temperature History Version:     2
  298. Temperature Sampling Period:         1 minute
  299. Temperature Logging Interval:        1 minute
  300. Min/Max recommended Temperature:      0/65 Celsius
  301. Min/Max Temperature Limit:           -41/85 Celsius
  302. Temperature History Size (Index):    478 (17)
  303.  
  304. Index    Estimated Time   Temperature Celsius
  305.   18    2024-02-12 12:12    39  ********************
  306.  ...    ..(168 skipped).    ..  ********************
  307.  187    2024-02-12 15:01    39  ********************
  308.  188    2024-02-12 15:02    38  *******************
  309.  ...    ..( 27 skipped).    ..  *******************
  310.  216    2024-02-12 15:30    38  *******************
  311.  217    2024-02-12 15:31    37  ******************
  312.  ...    ..( 26 skipped).    ..  ******************
  313.  244    2024-02-12 15:58    37  ******************
  314.  245    2024-02-12 15:59    36  *****************
  315.  ...    ..(117 skipped).    ..  *****************
  316.  363    2024-02-12 17:57    36  *****************
  317.  364    2024-02-12 17:58    35  ****************
  318.  ...    ..( 18 skipped).    ..  ****************
  319.  383    2024-02-12 18:17    35  ****************
  320.  384    2024-02-12 18:18    36  *****************
  321.  ...    ..( 87 skipped).    ..  *****************
  322.  472    2024-02-12 19:46    36  *****************
  323.  473    2024-02-12 19:47     ?  -
  324.  474    2024-02-12 19:48    21  **
  325.  475    2024-02-12 19:49    21  **
  326.  476    2024-02-12 19:50    22  ***
  327.  477    2024-02-12 19:51    22  ***
  328.    0    2024-02-12 19:52    22  ***
  329.    1    2024-02-12 19:53    23  ****
  330.    2    2024-02-12 19:54    24  *****
  331.    3    2024-02-12 19:55    24  *****
  332.    4    2024-02-12 19:56    25  ******
  333.    5    2024-02-12 19:57    25  ******
  334.    6    2024-02-12 19:58    25  ******
  335.    7    2024-02-12 19:59    26  *******
  336.  ...    ..(  7 skipped).    ..  *******
  337.   15    2024-02-12 20:07    26  *******
  338.   16    2024-02-12 20:08     ?  -
  339.   17    2024-02-12 20:09    23  ****
  340.  
  341. SCT Error Recovery Control:
  342.            Read:     70 (7,0 seconds)
  343.           Write:     70 (7,0 seconds)
  344.  
  345. Device Statistics (GP Log 0x04)
  346. Page  Offset Size        Value Flags Description
  347. 0x01  =====  =               =  ===  == General Statistics (rev 3) ==
  348. 0x01  0x008  4               6  ---  Lifetime Power-On Resets
  349. 0x01  0x010  4              89  ---  Power-on Hours
  350. 0x01  0x018  6     17190612258  ---  Logical Sectors Written
  351. 0x01  0x020  6        13555832  ---  Number of Write Commands
  352. 0x01  0x028  6      7520734466  ---  Logical Sectors Read
  353. 0x01  0x030  6         6707346  ---  Number of Read Commands
  354. 0x01  0x038  6       320400000  ---  Date and Time TimeStamp
  355. 0x02  =====  =               =  ===  == Free-Fall Statistics (rev 1) ==
  356. 0x02  0x010  4               0  ---  Overlimit Shock Events
  357. 0x03  =====  =               =  ===  == Rotating Media Statistics (rev 1) ==
  358. 0x03  0x008  4              87  ---  Spindle Motor Power-on Hours
  359. 0x03  0x010  4              52  ---  Head Flying Hours
  360. 0x03  0x018  4              14  ---  Head Load Events
  361. 0x03  0x020  4             822  ---  Number of Reallocated Logical Sectors
  362. 0x03  0x028  4           39160  ---  Read Recovery Attempts
  363. 0x03  0x030  4               0  ---  Number of Mechanical Start Failures
  364. 0x03  0x038  4           14784  ---  Number of Realloc. Candidate Logical Sectors
  365. 0x03  0x040  4               4  ---  Number of High Priority Unload Events
  366. 0x04  =====  =               =  ===  == General Errors Statistics (rev 1) ==
  367. 0x04  0x008  4            1947  ---  Number of Reported Uncorrectable Errors
  368. 0x04  0x010  4               0  ---  Resets Between Cmd Acceptance and Completion
  369. 0x05  =====  =               =  ===  == Temperature Statistics (rev 1) ==
  370. 0x05  0x008  1              23  ---  Current Temperature
  371. 0x05  0x010  1              37  ---  Average Short Term Temperature
  372. 0x05  0x018  1               -  ---  Average Long Term Temperature
  373. 0x05  0x020  1              44  ---  Highest Temperature
  374. 0x05  0x028  1              24  ---  Lowest Temperature
  375. 0x05  0x030  1              37  ---  Highest Average Short Term Temperature
  376. 0x05  0x038  1              31  ---  Lowest Average Short Term Temperature
  377. 0x05  0x040  1               -  ---  Highest Average Long Term Temperature
  378. 0x05  0x048  1               -  ---  Lowest Average Long Term Temperature
  379. 0x05  0x050  4               0  ---  Time in Over-Temperature
  380. 0x05  0x058  1              65  ---  Specified Maximum Operating Temperature
  381. 0x05  0x060  4               0  ---  Time in Under-Temperature
  382. 0x05  0x068  1               0  ---  Specified Minimum Operating Temperature
  383. 0x06  =====  =               =  ===  == Transport Statistics (rev 1) ==
  384. 0x06  0x008  4              33  ---  Number of Hardware Resets
  385. 0x06  0x010  4              14  ---  Number of ASR Events
  386. 0x06  0x018  4               0  ---  Number of Interface CRC Errors
  387. 0xff  =====  =               =  ===  == Vendor Specific Statistics (rev 1) ==
  388. 0xff  0x008  7               0  ---  Vendor Specific
  389. 0xff  0x010  7               0  ---  Vendor Specific
  390. 0xff  0x018  7               0  ---  Vendor Specific
  391.                                 |||_ C monitored condition met
  392.                                 ||__ D supports DSN
  393.                                 |___ N normalized value
  394.  
  395. Pending Defects log (GP Log 0x0c)
  396. Index                LBA    Hours
  397.     0         3258494744        -
  398.     1         3258494745        -
  399.     2         3258494746        -
  400.     3         3258494747        -
  401.     4         3258494748        -
  402.     5         3258494749        -
  403.     6         3258494750        -
  404.     7         3258494751        -
  405.     8         3258847992        -
  406.     9         3258847993        -
  407.    10         3258847994        -
  408.    11         3258847995        -
  409.    12         3258847996        -
  410.    13         3258847997        -
  411.    14         3258847998        -
  412.    15         3258847999        -
  413.    16         3261918160        -
  414.    17         3261918161        -
  415.    18         3261918162        -
  416.    19         3261918163        -
  417.    20         3261918164        -
  418.    21         3261918165        -
  419.    22         3261918166        -
  420.    23         3261918167        -
  421.    24         3261938128        -
  422.    25         3261938129        -
  423.    26         3261938130        -
  424.    27         3261938131        -
  425.    28         3261938132        -
  426.    29         3261938133        -
  427.    30         3261938134        -
  428. ... (1609 entries not shown)
  429.  
  430. SATA Phy Event Counters (GP Log 0x11)
  431. ID      Size     Value  Description
  432. 0x0001  2            0  Command failed due to ICRC error
  433. 0x0002  2            0  R_ERR response for data FIS
  434. 0x0003  2            0  R_ERR response for device-to-host data FIS
  435. 0x0004  2            0  R_ERR response for host-to-device data FIS
  436. 0x0005  2            0  R_ERR response for non-data FIS
  437. 0x0006  2            0  R_ERR response for device-to-host non-data FIS
  438. 0x0007  2            0  R_ERR response for host-to-device non-data FIS
  439. 0x0008  2            0  Device-to-host non-data FIS retries
  440. 0x0009  2            0  Transition from drive PhyRdy to drive PhyNRdy
  441. 0x000a  2            1  Device-to-host register FISes sent due to a COMRESET
  442. 0x000b  2            0  CRC errors within host-to-device FIS
  443. 0x000d  2            0  Non-CRC errors within host-to-device FIS
  444. 0x000f  2            0  R_ERR response for host-to-device data FIS, CRC
  445. 0x0012  2            0  R_ERR response for host-to-device non-data FIS, CRC
  446. 0x8000  4            9  Vendor specific

Quellcode

Hier kannst du den Code kopieren und ihn in deinen bevorzugten Editor einfügen. PASTEBIN_DOWNLOAD_SNIPPET_EXPLAIN

Verlinken

URL: alles markieren
https://nopaste.debianforum.de/42114

BBCode: alles markieren
[NP]42114[/NP]

LATEST_SNIPPETS