SD Card error
von empty_string- SNIPPET_TEXT:
-
- [ 6550.622051] scsi host2: usb-storage 1-5.4:1.0
- [ 6551.629813] scsi 2:0:0:0: Direct-Access Generic Mass-Storage 1.11 PQ: 0 ANSI: 2
- [ 6551.630143] sd 2:0:0:0: Attached scsi generic sg2 type 0
- [ 6552.396335] sd 2:0:0:0: [sdc] 124735488 512-byte logical blocks: (63.9 GB/59.5 GiB)
- [ 6552.396870] sd 2:0:0:0: [sdc] Write Protect is off
- [ 6552.396881] sd 2:0:0:0: [sdc] Mode Sense: 03 00 00 00
- [ 6552.397398] sd 2:0:0:0: [sdc] No Caching mode page found
- [ 6552.397407] sd 2:0:0:0: [sdc] Assuming drive cache: write through
- [ 6552.402277] sdc: sdc1
- [ 6552.402507] sd 2:0:0:0: [sdc] Attached SCSI removable disk
- [ 6553.540035] sd 2:0:0:0: [sdc] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=1s
- [ 6553.540045] sd 2:0:0:0: [sdc] tag#0 Sense Key : Not Ready [current]
- [ 6553.540049] sd 2:0:0:0: [sdc] tag#0 Add. Sense: Medium not present
- [ 6553.540052] sd 2:0:0:0: [sdc] tag#0 CDB: Read(10) 28 00 00 00 10 00 00 00 08 00
- [ 6553.540054] I/O error, dev sdc, sector 4096 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
- [ 6554.303338] sd 2:0:0:0: [sdc] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
- [ 6554.303346] sd 2:0:0:0: [sdc] tag#0 Sense Key : Unit Attention [current]
- [ 6554.303350] sd 2:0:0:0: [sdc] tag#0 Add. Sense: Not ready to ready change, medium may have changed
- [ 6554.303352] sd 2:0:0:0: [sdc] tag#0 CDB: Read(10) 28 00 00 00 10 00 00 00 08 00
- [ 6554.303354] I/O error, dev sdc, sector 4096 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
- [ 6554.303364] Buffer I/O error on dev sdc, logical block 512, async page read
- [ 6554.309601] sdc: sdc1
Quellcode
Hier kannst du den Code kopieren und ihn in deinen bevorzugten Editor einfügen. PASTEBIN_DOWNLOAD_SNIPPET_EXPLAIN