NoPaste

Re: ext4-Dateisystem defekt

von KBDCALLS
SNIPPET_DESC:
https://debianforum.de/forum/posting.php?mode=edit&p=1367403
SNIPPET_CREATION_TIME:
31.07.2024 10:24:09
SNIPPET_PRUNE_TIME:
Unendlich

SNIPPET_TEXT:
  1. === START OF INFORMATION SECTION ===
  2. Model Family:     Western Digital Green
  3. Device Model:     WDC WD50EZRX-00MVLB1
  4. Serial Number:    WD-WX11D741AKZD
  5. LU WWN Device Id: 5 0014ee 20ad5b069
  6. Firmware Version: 80.00A80
  7. User Capacity:    5.000.981.078.016 bytes [5,00 TB]
  8. Sector Sizes:     512 bytes logical, 4096 bytes physical
  9. Rotation Rate:    5700 rpm
  10. Device is:        In smartctl database 7.3/5610
  11. ATA Version is:   ACS-2, ACS-3 T13/2161-D revision 3b
  12. SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
  13. Local Time is:    Fri Jul 26 18:18:09 2024 CEST
  14. SMART support is: Available - device has SMART capability.
  15. SMART support is: Enabled
  16.  
  17. === START OF READ SMART DATA SECTION ===
  18. SMART Status not supported: Incomplete response, ATA output registers missing
  19. SMART overall-health self-assessment test result: PASSED
  20. Warning: This result is based on an Attribute check.
  21.  
  22. General SMART Values:
  23. Offline data collection status:  (0x82) Offline data collection activity
  24.                                         was completed without error.
  25.                                         Auto Offline Data Collection: Enabled.
  26. Self-test execution status:      (   0) The previous self-test routine completed
  27.                                         without error or no self-test has ever
  28.                                         been run.
  29. Total time to complete Offline
  30. data collection:                (58440) seconds.
  31. Offline data collection
  32. capabilities:                    (0x7b) SMART execute Offline immediate.
  33.                                         Auto Offline data collection on/off support.
  34.                                         Suspend Offline collection upon new
  35.                                         command.
  36.                                         Offline surface scan supported.
  37.                                         Self-test supported.
  38.                                         Conveyance Self-test supported.
  39.                                         Selective Self-test supported.
  40. SMART capabilities:            (0x0003) Saves SMART data before entering
  41.                                         power-saving mode.
  42.                                         Supports SMART auto save timer.
  43. Error logging capability:        (0x01) Error logging supported.
  44.                                         General Purpose Logging supported.
  45. Short self-test routine
  46. recommended polling time:        (   2) minutes.
  47. Extended self-test routine
  48. recommended polling time:        ( 584) minutes.
  49. Conveyance self-test routine
  50. recommended polling time:        (   5) minutes.
  51. SCT capabilities:              (0x3035) SCT Status supported.
  52.                                         SCT Feature Control supported.
  53.                                         SCT Data Table supported.
  54.  
  55. SMART Attributes Data Structure revision number: 16
  56. Vendor Specific SMART Attributes with Thresholds:
  57. ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  58.   1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       -       0
  59.   3 Spin_Up_Time            0x0027   224   197   021    Pre-fail  Always       -       7800
  60.   4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       209
  61.   5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  62.   7 Seek_Error_Rate         0x002e   200   200   000    Old_age   Always       -       0
  63.   9 Power_On_Hours          0x0032   099   099   000    Old_age   Always       -       1232
  64.  10 Spin_Retry_Count        0x0032   100   100   000    Old_age   Always       -       0
  65.  11 Calibration_Retry_Count 0x0032   100   100   000    Old_age   Always       -       0
  66.  12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       192
  67. 192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       186
  68. 193 Load_Cycle_Count        0x0032   200   200   000    Old_age   Always       -       1466
  69. 194 Temperature_Celsius     0x0022   109   103   000    Old_age   Always       -       43
  70. 196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
  71. 197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       0
  72. 198 Offline_Uncorrectable   0x0030   200   200   000    Old_age   Offline      -       0
  73. 199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0
  74. 200 Multi_Zone_Error_Rate   0x0008   200   200   000    Old_age   Offline      -       0
  75.  
  76. SMART Error Log Version: 1
  77. No Errors Logged
  78.  
  79. SMART Self-test log structure revision number 1
  80. No self-tests have been logged.  [To run self-tests, use: smartctl -t]
  81.  
  82. SMART Selective self-test log data structure revision number 1
  83.  SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
  84.     1        0        0  Not_testing
  85.     2        0        0  Not_testing
  86.     3        0        0  Not_testing
  87.     4        0        0  Not_testing
  88.     5        0        0  Not_testing
  89. Selective self-test flags (0x0):
  90.   After scanning selected spans, do NOT read-scan remainder of disk.
  91. If Selective self-test is pending on power-up, resume after 0 minute delay.

Quellcode

Hier kannst du den Code kopieren und ihn in deinen bevorzugten Editor einfügen. PASTEBIN_DOWNLOAD_SNIPPET_EXPLAIN

Verlinken

URL: alles markieren
https://nopaste.debianforum.de/42188

BBCode: alles markieren
[NP]42188[/NP]

LATEST_SNIPPETS