NoPaste

dmesg_output

von HousyHarry
SNIPPET_DESC:
dmesg_output for "[Errno 5] Input/output error:"
SNIPPET_CREATION_TIME:
31.07.2024 20:52:39
SNIPPET_PRUNE_TIME:
Unendlich

SNIPPET_TEXT:
  1. [    0.000000] Booting Linux on physical CPU 0x0000000000 [0x414fd0b1]
  2. [    0.000000] Linux version 6.6.31+rpt-rpi-2712 (serge@raspberrypi.com) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT Debian 1:6.6.31-1+rpt1 (2024-05-29)
  3. [    0.000000] KASLR enabled
  4. [    0.000000] random: crng init done
  5. [    0.000000] Machine model: Raspberry Pi 5 Model B Rev 1.0
  6. [    0.000000] efi: UEFI not found.
  7. [    0.000000] Reserved memory: created CMA memory pool at 0x0000000002000000, size 320 MiB
  8. [    0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
  9. [    0.000000] OF: reserved mem: 0x0000000002000000..0x0000000015ffffff (327680 KiB) map reusable linux,cma
  10. [    0.000000] OF: reserved mem: 0x0000000000000000..0x000000000007ffff (512 KiB) nomap non-reusable atf@0
  11. [    0.000000] OF: reserved mem: 0x000000003fd165a0..0x000000003fd165d7 (0 KiB) nomap non-reusable nvram@0
  12. [    0.000000] Zone ranges:
  13. [    0.000000]   DMA      [mem 0x0000000000000000-0x00000000ffffffff]
  14. [    0.000000]   DMA32    empty
  15. [    0.000000]   Normal   empty
  16. [    0.000000] Movable zone start for each node
  17. [    0.000000] Early memory node ranges
  18. [    0.000000]   node   0: [mem 0x0000000000000000-0x000000000007ffff]
  19. [    0.000000]   node   0: [mem 0x0000000000080000-0x000000003fbfffff]
  20. [    0.000000]   node   0: [mem 0x0000000040000000-0x00000000ffffffff]
  21. [    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000000ffffffff]
  22. [    0.000000] On node 0, zone DMA: 256 pages in unavailable ranges
  23. [    0.000000] psci: probing for conduit method from DT.
  24. [    0.000000] psci: PSCIv1.1 detected in firmware.
  25. [    0.000000] psci: Using standard PSCI v0.2 function IDs
  26. [    0.000000] psci: MIGRATE_INFO_TYPE not supported.
  27. [    0.000000] psci: SMC Calling Convention v1.2
  28. [    0.000000] percpu: Embedded 14 pages/cpu s183976 r8192 d37208 u229376
  29. [    0.000000] pcpu-alloc: s183976 r8192 d37208 u229376 alloc=14*16384
  30. [    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  31. [    0.000000] Detected PIPT I-cache on CPU0
  32. [    0.000000] CPU features: detected: Virtualization Host Extensions
  33. [    0.000000] CPU features: detected: Hardware dirty bit management
  34. [    0.000000] CPU features: detected: Spectre-v4
  35. [    0.000000] CPU features: detected: Spectre-BHB
  36. [    0.000000] CPU features: kernel page table isolation forced ON by KASLR
  37. [    0.000000] CPU features: detected: Kernel page table isolation (KPTI)
  38. [    0.000000] alternatives: applying boot alternatives
  39. [    0.000000] Kernel command line: reboot=w coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe  smsc95xx.macaddr=2C:CF:67:16:9C:F5 vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000  console=ttyAMA10,115200 console=tty1 root=PARTUUID=ded88ef0-02 rootfstype=ext4 fsck.repair=yes rootwait
  40. [    0.000000] Dentry cache hash table entries: 524288 (order: 8, 4194304 bytes, linear)
  41. [    0.000000] Inode-cache hash table entries: 262144 (order: 7, 2097152 bytes, linear)
  42. [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 260864
  43. [    0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
  44. [    0.000000] Memory: 3795088K/4190208K available (13440K kernel code, 2222K rwdata, 4288K rodata, 5056K init, 1213K bss, 67440K reserved, 327680K cma-reserved)
  45. [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  46. [    0.000000] ftrace: allocating 43180 entries in 43 pages
  47. [    0.000000] ftrace: allocated 43 pages with 4 groups
  48. [    0.000000] trace event string verifier disabled
  49. [    0.000000] rcu: Preemptible hierarchical RCU implementation.
  50. [    0.000000] rcu:     RCU event tracing is enabled.
  51. [    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
  52. [    0.000000]  Trampoline variant of Tasks RCU enabled.
  53. [    0.000000]  Rude variant of Tasks RCU enabled.
  54. [    0.000000]  Tracing variant of Tasks RCU enabled.
  55. [    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
  56. [    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
  57. [    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  58. [    0.000000] Root IRQ handler: gic_handle_irq
  59. [    0.000000] GIC: Using split EOI/Deactivate mode
  60. [    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
  61. [    0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
  62. [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
  63. [    0.000000] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
  64. [    0.000164] Console: colour dummy device 80x25
  65. [    0.000168] printk: console [tty1] enabled
  66. [    0.000331] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000)
  67. [    0.000339] pid_max: default: 32768 minimum: 301
  68. [    0.000363] LSM: initializing lsm=capability,integrity
  69. [    0.000422] Mount-cache hash table entries: 8192 (order: 2, 65536 bytes, linear)
  70. [    0.000437] Mountpoint-cache hash table entries: 8192 (order: 2, 65536 bytes, linear)
  71. [    0.000774] cgroup: Disabling memory control group subsystem
  72. [    0.001194] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
  73. [    0.001220] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
  74. [    0.001246] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
  75. [    0.001306] rcu: Hierarchical SRCU implementation.
  76. [    0.001309] rcu:     Max phase no-delay instances is 1000.
  77. [    0.001926] EFI services will not be available.
  78. [    0.001999] smp: Bringing up secondary CPUs ...
  79. [    0.002155] Detected PIPT I-cache on CPU1
  80. [    0.002197] CPU1: Booted secondary processor 0x0000000100 [0x414fd0b1]
  81. [    0.002371] Detected PIPT I-cache on CPU2
  82. [    0.002404] CPU2: Booted secondary processor 0x0000000200 [0x414fd0b1]
  83. [    0.002562] Detected PIPT I-cache on CPU3
  84. [    0.002591] CPU3: Booted secondary processor 0x0000000300 [0x414fd0b1]
  85. [    0.002617] smp: Brought up 1 node, 4 CPUs
  86. [    0.002635] SMP: Total of 4 processors activated.
  87. [    0.002639] CPU features: detected: 32-bit EL0 Support
  88. [    0.002643] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
  89. [    0.002648] CPU features: detected: Common not Private translations
  90. [    0.002651] CPU features: detected: CRC32 instructions
  91. [    0.002656] CPU features: detected: RCpc load-acquire (LDAPR)
  92. [    0.002659] CPU features: detected: LSE atomic instructions
  93. [    0.002663] CPU features: detected: Privileged Access Never
  94. [    0.002667] CPU features: detected: RAS Extension Support
  95. [    0.002671] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
  96. [    0.002709] CPU: All CPU(s) started at EL2
  97. [    0.002713] alternatives: applying system-wide alternatives
  98. [    0.004532] devtmpfs: initialized
  99. [    0.007517] Enabled cp15_barrier support
  100. [    0.007527] Enabled setend support
  101. [    0.007586] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  102. [    0.007596] futex hash table entries: 1024 (order: 2, 65536 bytes, linear)
  103. [    0.008336] pinctrl core: initialized pinctrl subsystem
  104. [    0.008468] DMI not present or invalid.
  105. [    0.008628] NET: Registered PF_NETLINK/PF_ROUTE protocol family
  106. [    0.009218] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
  107. [    0.009267] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
  108. [    0.009318] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
  109. [    0.009339] audit: initializing netlink subsys (disabled)
  110. [    0.009388] audit: type=2000 audit(0.008:1): state=initialized audit_enabled=0 res=1
  111. [    0.009504] thermal_sys: Registered thermal governor 'step_wise'
  112. [    0.009518] cpuidle: using governor menu
  113. [    0.009582] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  114. [    0.009612] ASID allocator initialised with 32768 entries
  115. [    0.009936] Serial: AMBA PL011 UART driver
  116. [    0.010889] bcm2835-mbox 107c013880.mailbox: mailbox enabled
  117. [    0.011232] 107d001000.serial: ttyAMA10 at MMIO 0x107d001000 (irq = 15, base_baud = 0) is a PL011 rev2
  118. [    0.011246] printk: console [ttyAMA10] enabled
  119. [    0.733357] raspberrypi-firmware soc:firmware: Attached to firmware from 2024-04-20T10:53:30, variant start_cd
  120. [    0.747412] raspberrypi-firmware soc:firmware: Firmware hash is d1744d2100000000000000000000000000000000
  121. [    0.763275] Modules: 2G module region forced by RANDOMIZE_MODULE_REGION_FULL
  122. [    0.770361] Modules: 0 pages in range for non-PLT usage
  123. [    0.770363] Modules: 129412 pages in range for PLT usage
  124. [    0.780177] bcm2835-dma 1000010000.dma: DMA legacy API manager, dmachans=0x1
  125. [    0.793159] iommu: Default domain type: Translated
  126. [    0.798045] iommu: DMA domain TLB invalidation policy: strict mode
  127. [    0.804337] SCSI subsystem initialized
  128. [    0.808132] usbcore: registered new interface driver usbfs
  129. [    0.813644] usbcore: registered new interface driver hub
  130. [    0.818983] usbcore: registered new device driver usb
  131. [    0.824136] pps_core: LinuxPPS API ver. 1 registered
  132. [    0.829119] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  133. [    0.838293] PTP clock support registered
  134. [    0.842486] vgaarb: loaded
  135. [    0.845297] clocksource: Switched to clocksource arch_sys_counter
  136. [    0.851537] VFS: Disk quotas dquot_6.6.0
  137. [    0.855482] VFS: Dquot-cache hash table entries: 2048 (order 0, 16384 bytes)
  138. [    0.862587] FS-Cache: Loaded
  139. [    0.869313] CacheFiles: Loaded
  140. [    0.873874] NET: Registered PF_INET protocol family
  141. [    0.878861] IP idents hash table entries: 65536 (order: 5, 524288 bytes, linear)
  142. [    0.887544] tcp_listen_portaddr_hash hash table entries: 2048 (order: 1, 32768 bytes, linear)
  143. [    0.896126] Table-perturb hash table entries: 65536 (order: 4, 262144 bytes, linear)
  144. [    0.903904] TCP established hash table entries: 32768 (order: 4, 262144 bytes, linear)
  145. [    0.911986] TCP bind hash table entries: 32768 (order: 6, 1048576 bytes, linear)
  146. [    0.920196] TCP: Hash tables configured (established 32768 bind 32768)
  147. [    0.926868] MPTCP token hash table entries: 4096 (order: 2, 98304 bytes, linear)
  148. [    0.934347] UDP hash table entries: 2048 (order: 2, 65536 bytes, linear)
  149. [    0.941127] UDP-Lite hash table entries: 2048 (order: 2, 65536 bytes, linear)
  150. [    0.948389] NET: Registered PF_UNIX/PF_LOCAL protocol family
  151. [    0.954188] RPC: Registered named UNIX socket transport module.
  152. [    0.960131] RPC: Registered udp transport module.
  153. [    0.964850] RPC: Registered tcp transport module.
  154. [    0.969568] RPC: Registered tcp-with-tls transport module.
  155. [    0.975073] RPC: Registered tcp NFSv4.1 backchannel transport module.
  156. [    0.981547] PCI: CLS 0 bytes, default 64
  157. [    0.985540] Trying to unpack rootfs image as initramfs...
  158. [    0.993464] kvm [1]: IPA Size Limit: 40 bits
  159. [    0.997797] kvm [1]: GICV region size/alignment is unsafe, using trapping (reduced performance)
  160. [    1.006561] kvm [1]: vgic interrupt IRQ9
  161. [    1.010513] kvm [1]: VHE mode initialized successfully
  162. [    1.067293] Initialise system trusted keyrings
  163. [    1.071867] workingset: timestamp_bits=46 max_order=18 bucket_order=0
  164. [    1.078397] zbud: loaded
  165. [    1.081194] NFS: Registering the id_resolver key type
  166. [    1.086285] Key type id_resolver registered
  167. [    1.090484] Key type id_legacy registered
  168. [    1.094518] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  169. [    1.101249] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
  170. [    1.108752] F2FS not supported on PAGE_SIZE(16384) != 4096
  171. [    1.114329] Key type asymmetric registered
  172. [    1.118448] Asymmetric key parser 'x509' registered
  173. [    1.123373] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
  174. [    1.130862] io scheduler mq-deadline registered
  175. [    1.135415] io scheduler kyber registered
  176. [    1.139454] io scheduler bfq registered
  177. [    1.145588] irq_brcmstb_l2: registered L2 intc (/soc/interrupt-controller@7c502000, parent irq: 26)
  178. [    1.154782] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d503000, parent irq: 27)
  179. [    1.162606] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d508380, parent irq: 28)
  180. [    1.170374] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d508400, parent irq: 29)
  181. [    1.178147] irq_brcmstb_l2: registered L2 intc (/soc/interrupt-controller@7d510600, parent irq: 30)
  182. [    1.187319] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d517b00, parent irq: 31)
  183. [    1.197087] Freeing initrd memory: 14400K
  184. [    1.232207] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
  185. [    1.238944] 107d50c000.serial: ttyS0 at MMIO 0x107d50c000 (irq = 33, base_baud = 6000000) is a Broadcom BCM7271 UART
  186. [    1.249570] serial serial0: tty port ttyS0 registered
  187. [    1.254963] iproc-rng200 107d208000.rng: hwrng registered
  188. [    1.260442] vc-mem: phys_addr:0x00000000 mem_base=0x3fc00000 mem_size:0x40000000(1024 MiB)
  189. [    1.268970] bcm2712-iommu-cache 1000005b00.iommuc: bcm2712_iommu_cache_probe
  190. [    1.278052] brd: module loaded
  191. [    1.282590] loop: module loaded
  192. [    1.285866] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
  193. [    1.293247] Loading iSCSI transport class v2.0-870.
  194. [    1.299045] usbcore: registered new device driver r8152-cfgselector
  195. [    1.305351] usbcore: registered new interface driver r8152
  196. [    1.310863] usbcore: registered new interface driver lan78xx
  197. [    1.316548] usbcore: registered new interface driver smsc95xx
  198. [    1.322374] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
  199. [    1.328162] dwc_otg: FIQ enabled
  200. [    1.328164] dwc_otg: NAK holdoff enabled
  201. [    1.328166] dwc_otg: FIQ split-transaction FSM enabled
  202. [    1.328168] Module dwc_common_port init
  203. [    1.328293] usbcore: registered new interface driver uas
  204. [    1.333634] usbcore: registered new interface driver usb-storage
  205. [    1.339758] mousedev: PS/2 mouse device common for all mice
  206. [    1.353740] rpi-rtc soc:rpi_rtc: registered as rtc0
  207. [    1.360156] rpi-rtc soc:rpi_rtc: setting system clock to 1970-01-01T00:00:11 UTC (11)
  208. [    1.368349] bcm2835-wdt bcm2835-wdt: Poweroff handler already present!
  209. [    1.374908] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
  210. [    1.383692] sdhci: Secure Digital Host Controller Interface driver
  211. [    1.389902] sdhci: Copyright(c) Pierre Ossman
  212. [    1.394313] sdhci-pltfm: SDHCI platform and OF driver helper
  213. [    1.400184] ledtrig-cpu: registered to indicate activity on CPUs
  214. [    1.406258] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
  215. [    1.412737] hid: raw HID events driver (C) Jiri Kosina
  216. [    1.417911] usbcore: registered new interface driver usbhid
  217. [    1.423504] usbhid: USB HID core driver
  218. [    1.427692] hw perfevents: enabled with armv8_cortex_a76 PMU driver, 7 counters available
  219. [    1.436262] NET: Registered PF_PACKET protocol family
  220. [    1.441363] Key type dns_resolver registered
  221. [    1.451196] registered taskstats version 1
  222. [    1.455380] Loading compiled-in X.509 certificates
  223. [    1.462579] Key type .fscrypt registered
  224. [    1.466518] Key type fscrypt-provisioning registered
  225. [    1.472795] brcm-pcie 1000120000.pcie: host bridge /axi/pcie@120000 ranges:
  226. [    1.480082] brcm-pcie 1000120000.pcie:   No bus range found for /axi/pcie@120000, using [bus 00-ff]
  227. [    1.489182] brcm-pcie 1000120000.pcie:      MEM 0x1f00000000..0x1ffffffffb -> 0x0000000000
  228. [    1.497486] brcm-pcie 1000120000.pcie:      MEM 0x1c00000000..0x1effffffff -> 0x0400000000
  229. [    1.505793] brcm-pcie 1000120000.pcie:   IB MEM 0x1f00000000..0x1f003fffff -> 0x0000000000
  230. [    1.514098] brcm-pcie 1000120000.pcie:   IB MEM 0x0000000000..0x0fffffffff -> 0x1000000000
  231. [    1.523573] brcm-pcie 1000120000.pcie: Forcing gen 2
  232. [    1.528728] brcm-pcie 1000120000.pcie: PCI host bridge to bus 0000:00
  233. [    1.535196] pci_bus 0000:00: root bus resource [bus 00-ff]
  234. [    1.540704] pci_bus 0000:00: root bus resource [mem 0x1f00000000-0x1ffffffffb] (bus address [0x00000000-0xfffffffb])
  235. [    1.551275] pci_bus 0000:00: root bus resource [mem 0x1c00000000-0x1effffffff pref] (bus address [0x400000000-0x6ffffffff])
  236. [    1.562467] pci 0000:00:00.0: [14e4:2712] type 01 class 0x060400
  237. [    1.568521] pci 0000:00:00.0: PME# supported from D0 D3hot
  238. [    1.574944] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
  239. [    1.689301] brcm-pcie 1000120000.pcie: link up, 5.0 GT/s PCIe x4 (!SSC)
  240. [    1.695962] pci 0000:01:00.0: [1de4:0001] type 00 class 0x020000
  241. [    1.702004] pci 0000:01:00.0: reg 0x10: [mem 0xffffc000-0xffffffff]
  242. [    1.708301] pci 0000:01:00.0: reg 0x14: [mem 0xffc00000-0xffffffff]
  243. [    1.714597] pci 0000:01:00.0: reg 0x18: [mem 0xffff0000-0xffffffff]
  244. [    1.720957] pci 0000:01:00.0: supports D1
  245. [    1.724978] pci 0000:01:00.0: PME# supported from D0 D1 D3hot D3cold
  246. [    1.741307] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
  247. [    1.747957] pci 0000:00:00.0: BAR 8: assigned [mem 0x1f00000000-0x1f005fffff]
  248. [    1.755124] pci 0000:01:00.0: BAR 1: assigned [mem 0x1f00000000-0x1f003fffff]
  249. [    1.762291] pci 0000:01:00.0: BAR 2: assigned [mem 0x1f00400000-0x1f0040ffff]
  250. [    1.769458] pci 0000:01:00.0: BAR 0: assigned [mem 0x1f00410000-0x1f00413fff]
  251. [    1.776625] pci 0000:00:00.0: PCI bridge to [bus 01]
  252. [    1.781607] pci 0000:00:00.0:   bridge window [mem 0x1f00000000-0x1f005fffff]
  253. [    1.788774] pci 0000:00:00.0: Max Payload Size set to  256/ 512 (was  128), Max Read Rq  512
  254. [    1.797255] pci 0000:01:00.0: Max Payload Size set to  256/ 256 (was  128), Max Read Rq  512
  255. [    1.805793] pcieport 0000:00:00.0: enabling device (0000 -> 0002)
  256. [    1.811947] pcieport 0000:00:00.0: PME: Signaling with IRQ 38
  257. [    1.817767] pcieport 0000:00:00.0: AER: enabled with IRQ 38
  258. [    1.823445] rp1 0000:01:00.0: bar0 len 0x4000, start 0x1f00410000, end 0x1f00413fff, flags, 0x40200
  259. [    1.832534] rp1 0000:01:00.0: bar1 len 0x400000, start 0x1f00000000, end 0x1f003fffff, flags, 0x40200
  260. [    1.841802] rp1 0000:01:00.0: enabling device (0000 -> 0002)
  261. [    1.848363] rp1 0000:01:00.0: chip_id 0x20001927
  262. [    1.857882] genirq: irq_chip rp1_irq_chip did not update eff. affinity mask of irq 100
  263. [    1.886121] macb 1f00100000.ethernet eth0: Cadence GEM rev 0x00070109 at 0x1f00100000 irq 106 (2c:cf:67:16:9c:f5)
  264. [    1.896980] dw_axi_dmac_platform 1f00188000.dma: DesignWare AXI DMA Controller, 8 channels
  265. [    1.905554] xhci-hcd xhci-hcd.0: xHCI Host Controller
  266. [    1.910637] xhci-hcd xhci-hcd.0: new USB bus registered, assigned bus number 1
  267. [    1.918331] xhci-hcd xhci-hcd.0: hcc params 0x0240fe6d hci version 0x110 quirks 0x0000008000000810
  268. [    1.927340] xhci-hcd xhci-hcd.0: irq 131, io mem 0x1f00200000
  269. [    1.933176] xhci-hcd xhci-hcd.0: xHCI Host Controller
  270. [    1.938247] xhci-hcd xhci-hcd.0: new USB bus registered, assigned bus number 2
  271. [    1.945499] xhci-hcd xhci-hcd.0: Host supports USB 3.0 SuperSpeed
  272. [    1.951662] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06
  273. [    1.959967] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  274. [    1.967221] usb usb1: Product: xHCI Host Controller
  275. [    1.972115] usb usb1: Manufacturer: Linux 6.6.31+rpt-rpi-2712 xhci-hcd
  276. [    1.978669] usb usb1: SerialNumber: xhci-hcd.0
  277. [    1.983243] hub 1-0:1.0: USB hub found
  278. [    1.987018] hub 1-0:1.0: 2 ports detected
  279. [    1.991179] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.06
  280. [    1.999481] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  281. [    2.006738] usb usb2: Product: xHCI Host Controller
  282. [    2.011632] usb usb2: Manufacturer: Linux 6.6.31+rpt-rpi-2712 xhci-hcd
  283. [    2.018251] usb usb2: SerialNumber: xhci-hcd.0
  284. [    2.022816] hub 2-0:1.0: USB hub found
  285. [    2.026600] hub 2-0:1.0: 1 port detected
  286. [    2.030847] xhci-hcd xhci-hcd.1: xHCI Host Controller
  287. [    2.036038] xhci-hcd xhci-hcd.1: new USB bus registered, assigned bus number 3
  288. [    2.043732] xhci-hcd xhci-hcd.1: hcc params 0x0240fe6d hci version 0x110 quirks 0x0000008000000810
  289. [    2.052843] xhci-hcd xhci-hcd.1: irq 136, io mem 0x1f00300000
  290. [    2.058684] xhci-hcd xhci-hcd.1: xHCI Host Controller
  291. [    2.063757] xhci-hcd xhci-hcd.1: new USB bus registered, assigned bus number 4
  292. [    2.071113] xhci-hcd xhci-hcd.1: Host supports USB 3.0 SuperSpeed
  293. [    2.077262] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06
  294. [    2.085664] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  295. [    2.092917] usb usb3: Product: xHCI Host Controller
  296. [    2.097811] usb usb3: Manufacturer: Linux 6.6.31+rpt-rpi-2712 xhci-hcd
  297. [    2.104464] usb usb3: SerialNumber: xhci-hcd.1
  298. [    2.109024] hub 3-0:1.0: USB hub found
  299. [    2.112798] hub 3-0:1.0: 2 ports detected
  300. [    2.116941] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.06
  301. [    2.125355] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  302. [    2.132609] usb usb4: Product: xHCI Host Controller
  303. [    2.137591] usb usb4: Manufacturer: Linux 6.6.31+rpt-rpi-2712 xhci-hcd
  304. [    2.144245] usb usb4: SerialNumber: xhci-hcd.1
  305. [    2.148797] hub 4-0:1.0: USB hub found
  306. [    2.152569] hub 4-0:1.0: 1 port detected
  307. [    2.157244] bcm2712-iommu 1000005100.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774
  308. [    2.165717] platform 1000800000.codec: bcm2712_iommu_probe_device: MMU 1000005100.iommu
  309. [    2.173867] platform 1000800000.codec: bcm2712_iommu_device_group: MMU 1000005100.iommu
  310. [    2.182015] platform 1000800000.codec: Adding to iommu group 0
  311. [    2.187881] platform 1000880000.pisp_be: bcm2712_iommu_probe_device: MMU 1000005100.iommu
  312. [    2.196198] platform 1000880000.pisp_be: bcm2712_iommu_device_group: MMU 1000005100.iommu
  313. [    2.204514] platform 1000880000.pisp_be: Adding to iommu group 0
  314. [    2.210667] platform 1000800000.codec: bcm2712_iommu_attach_dev: MMU 1000005100.iommu
  315. [    2.218632] platform 1000880000.pisp_be: bcm2712_iommu_attach_dev: MMU 1000005100.iommu
  316. [    2.226777] bcm2712-iommu 1000005100.iommu: bcm2712_iommu_probe: Success
  317. [    2.233958] bcm2712-iommu 1000005200.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774
  318. [    2.242486] platform axi:gpu: bcm2712_iommu_probe_device: MMU 1000005200.iommu
  319. [    2.249847] platform axi:gpu: bcm2712_iommu_device_group: MMU 1000005200.iommu
  320. [    2.257107] platform axi:gpu: Adding to iommu group 1
  321. [    2.262327] platform axi:gpu: bcm2712_iommu_attach_dev: MMU 1000005200.iommu
  322. [    2.269509] bcm2712-iommu 1000005200.iommu: bcm2712_iommu_probe: Success
  323. [    2.276586] bcm2712-iommu 1000005280.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774
  324. [    2.285048] bcm2712-iommu 1000005280.iommu: bcm2712_iommu_probe: Success
  325. [    2.292853] mmc1: CQHCI version 5.10
  326. [    2.292875] sdhci-brcmstb 1000fff000.mmc: Got CD GPIO
  327. [    2.296793] of_cfs_init
  328. [    2.303993] of_cfs_init: OK
  329. [    2.306861] clk: Disabling unused clocks
  330. [    2.337357] mmc0: SDHCI controller on 1000fff000.mmc [1000fff000.mmc] using ADMA 64-bit
  331. [    2.369667] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd
  332. [    2.401296] usb 2-1: New USB device found, idVendor=0bda, idProduct=9201, bcdDevice=f2.00
  333. [    2.409516] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  334. [    2.416832] usb 2-1: Product: Ugreen Storage Device
  335. [    2.421802] usb 2-1: Manufacturer: Ugreen
  336. [    2.426829] usb 2-1: SerialNumber: 1327112540E9
  337. [    2.461882] usb 2-1: Enable of device-initiated U1 failed.
  338. [    2.468628] usb 2-1: Enable of device-initiated U2 failed.
  339. [    2.489978] mmc0: new ultra high speed SDR104 SDHC card at address 0001
  340. [    2.496625] mmc1: SDHCI controller on 1001100000.mmc [1001100000.mmc] using ADMA 64-bit
  341. [    2.505024] mmcblk0: mmc0:0001 SD16G 29.1 GiB
  342. [    2.509505] usb 2-1: Enable of device-initiated U1 failed.
  343. [    2.512568] Freeing unused kernel memory: 5056K
  344. [    2.515985] usb 2-1: Enable of device-initiated U2 failed.
  345. [    2.519631] Run /init as init process
  346. [    2.526133]  mmcblk0: p1 p2
  347. [    2.528781]   with arguments:
  348. [    2.528783]     /init
  349. [    2.528928] mmcblk0: mmc0:0001 SD16G 29.1 GiB
  350. [    2.531586]   with environment:
  351. [    2.531587]     HOME=/
  352. [    2.531588]     TERM=linux
  353. [    2.536618] scsi host0: uas
  354. [    2.567996] mmc1: new ultra high speed DDR50 SDIO card at address 0001
  355. [    2.657746] input: pwr_button as /devices/platform/pwr_button/input/input0
  356. [    2.664884] scsi 0:0:0:0: Direct-Access     Samsung  SSD 860 QVO 1TB  1.02 PQ: 0 ANSI: 6
  357. [    2.677514] macb 1f00100000.ethernet end0: renamed from eth0
  358. [    2.686347] brcmstb-i2c 107d508200.i2c:  @97500hz registered in interrupt mode
  359. [    2.706436] brcmstb-i2c 107d508280.i2c:  @97500hz registered in interrupt mode
  360. [    2.713174] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
  361. [    2.722897] sd 0:0:0:0: [sda] Write Protect is off
  362. [    2.727903] sd 0:0:0:0: [sda] Mode Sense: 37 00 00 08
  363. [    2.730766] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  364. [    2.741465] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes
  365. [    2.747696] sd 0:0:0:0: [sda] Optimal transfer size 33553920 bytes
  366. [    2.764657]  sda: sda1
  367. [    2.767158] sd 0:0:0:0: [sda] Attached SCSI disk
  368. [    2.909301] raid6: neonx8   gen()  7792 MB/s
  369. [    2.981323] raid6: neonx4   gen()  6508 MB/s
  370. [    3.053334] raid6: neonx2   gen()  5046 MB/s
  371. [    3.125308] raid6: neonx1   gen()  4601 MB/s
  372. [    3.197323] raid6: int64x8  gen()  3161 MB/s
  373. [    3.269299] raid6: int64x4  gen()  3043 MB/s
  374. [    3.341309] raid6: int64x2  gen()  2414 MB/s
  375. [    3.413316] raid6: int64x1  gen()  2288 MB/s
  376. [    3.417600] raid6: using algorithm neonx8 gen() 7792 MB/s
  377. [    3.489295] raid6: .... xor() 5294 MB/s, rmw enabled
  378. [    3.494277] raid6: using neon recovery algorithm
  379. [    3.499439] xor: measuring software checksum speed
  380. [    3.505254]    8regs           :  9935 MB/sec
  381. [    3.510625]    32regs          :  9841 MB/sec
  382. [    3.515725]    arm64_neon      : 13511 MB/sec
  383. [    3.520095] xor: using function: arm64_neon (13511 MB/sec)
  384. [    3.525814] async_tx: api initialized (async)
  385. [    3.574264] Btrfs loaded, zoned=no, fsverity=no
  386. [    3.739078] EXT4-fs (mmcblk0p2): mounted filesystem 93c89e92-8f2e-4522-ad32-68faed883d2f ro with ordered data mode. Quota mode: none.
  387. [    4.286391] systemd[1]: System time before build time, advancing clock.
  388. [    4.391146] NET: Registered PF_INET6 protocol family
  389. [    4.396521] Segment Routing with IPv6
  390. [    4.400209] In-situ OAM (IOAM) with IPv6
  391. [    4.461814] systemd[1]: systemd 252.26-1~deb12u2 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
  392. [    4.494695] systemd[1]: Detected architecture arm64.
  393. [    4.509608] systemd[1]: Hostname set to <grapa-nas>.
  394. [    4.549424] systemd[1]: Using hardware watchdog 'Broadcom BCM2835 Watchdog timer', version 0, device /dev/watchdog0
  395. [    4.559927] systemd[1]: Watchdog running with a hardware timeout of 14s.
  396. [    4.662307] uart-pl011 107d001000.serial: no DMA platform data
  397. [    5.640825] systemd[1]: Queued start job for default target multi-user.target.
  398. [    5.661965] systemd[1]: Created slice system-getty.slice - Slice /system/getty.
  399. [    5.669725] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
  400. [    5.677944] systemd[1]: Created slice system-postfix.slice - Slice /system/postfix.
  401. [    5.685964] systemd[1]: Created slice system-serial\x2dgetty.slice - Slice /system/serial-getty.
  402. [    5.695118] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck.
  403. [    5.704138] systemd[1]: Created slice user.slice - User and Session Slice.
  404. [    5.711164] systemd[1]: Started systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch.
  405. [    5.722355] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
  406. [    5.733067] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
  407. [    5.745721] systemd[1]: Expecting device dev-disk-by\x2dpartuuid-ded88ef0\x2d01.device - /dev/disk/by-partuuid/ded88ef0-01...
  408. [    5.757125] systemd[1]: Expecting device dev-disk-by\x2duuid-dd4e8ee9\x2df83b\x2d4a09\x2db9fb\x2d9b6258b1609e.device - /dev/disk/by-uuid/dd4e8ee9-f83b-4a09-b9fb-9b6258b1609e...
  409. [    5.772977] systemd[1]: Expecting device dev-ttyAMA10.device - /dev/ttyAMA10...
  410. [    5.780366] systemd[1]: Reached target cryptsetup.target - Local Encrypted Volumes.
  411. [    5.788118] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
  412. [    5.797117] systemd[1]: Reached target paths.target - Path Units.
  413. [    5.803301] systemd[1]: Reached target slices.target - Slice Units.
  414. [    5.809649] systemd[1]: Reached target swap.target - Swaps.
  415. [    5.815294] systemd[1]: Reached target time-set.target - System Time Set.
  416. [    5.822200] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
  417. [    5.830709] systemd[1]: Listening on dm-event.socket - Device-mapper event daemon FIFOs.
  418. [    5.839014] systemd[1]: Listening on lvm2-lvmpolld.socket - LVM2 poll daemon socket.
  419. [    5.846948] systemd[1]: Listening on syslog.socket - Syslog Socket.
  420. [    5.853398] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket.
  421. [    5.862239] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
  422. [    5.871279] systemd[1]: Listening on systemd-journald-audit.socket - Journal Audit Socket.
  423. [    5.879736] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
  424. [    5.888829] systemd[1]: Listening on systemd-journald.socket - Journal Socket.
  425. [    5.896297] systemd[1]: Listening on systemd-networkd.socket - Network Service Netlink Socket.
  426. [    5.905124] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
  427. [    5.913408] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
  428. [    5.921552] systemd[1]: dev-hugepages.mount - Huge Pages File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/mm/hugepages).
  429. [    5.953420] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
  430. [    5.962415] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
  431. [    5.971258] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
  432. [    5.979487] systemd[1]: auth-rpcgss-module.service - Kernel Module supporting RPCSEC_GSS was skipped because of an unmet condition check (ConditionPathExists=/etc/krb5.keytab).
  433. [    5.995418] systemd[1]: Finished blk-availability.service - Availability of block devices.
  434. [    6.005631] systemd[1]: Starting fake-hwclock.service - Restore / save the current clock...
  435. [    6.015421] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout...
  436. [    6.025580] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
  437. [    6.036105] systemd[1]: Starting lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
  438. [    6.049988] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs...
  439. [    6.059988] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod...
  440. [    6.069363] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm...
  441. [    6.078265] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
  442. [    6.088430] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse...
  443. [    6.097488] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop...
  444. [    6.105353] systemd[1]: netplan-ovs-cleanup.service - OpenVSwitch configuration for cleanup was skipped because of an unmet condition check (ConditionFileIsExecutable=/usr/bin/ovs-vsctl).
  445. [    6.106163] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com
  446. [    6.122408] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root).
  447. [    6.147414] fuse: init (API version 7.39)
  448. [    6.152611] systemd[1]: Starting systemd-journald.service - Journal Service...
  449. [    6.175129] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
  450. [    6.184993] systemd[1]: Starting systemd-network-generator.service - Generate network units from Kernel command line...
  451. [    6.197999] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems...
  452. [    6.208898] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
  453. [    6.219708] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System.
  454. [    6.227727] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System.
  455. [    6.235573] systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System.
  456. [    6.243835] systemd[1]: Finished fake-hwclock.service - Restore / save the current clock.
  457. [    6.258063] systemd[1]: Finished keyboard-setup.service - Set the console keyboard layout.
  458. [    6.267689] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes.
  459. [    6.277072] systemd[1]: modprobe@configfs.service: Deactivated successfully.
  460. [    6.285345] systemd[1]: Finished modprobe@configfs.service - Load Kernel Module configfs.
  461. [    6.294319] systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
  462. [    6.301436] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod.
  463. [    6.309769] systemd[1]: modprobe@drm.service: Deactivated successfully.
  464. [    6.316580] systemd[1]: Finished modprobe@drm.service - Load Kernel Module drm.
  465. [    6.324360] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully.
  466. [    6.331780] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore.
  467. [    6.341736] systemd[1]: modprobe@fuse.service: Deactivated successfully.
  468. [    6.345362] EXT4-fs (mmcblk0p2): re-mounted 93c89e92-8f2e-4522-ad32-68faed883d2f r/w. Quota mode: none.
  469. [    6.349323] systemd[1]: Finished modprobe@fuse.service - Load Kernel Module fuse.
  470. [    6.366513] systemd[1]: Started systemd-journald.service - Journal Service.
  471. [    6.441083] systemd-journald[316]: Received client request to flush runtime journal.
  472. [    6.480022] systemd-journald[316]: File /var/log/journal/fbc2fa96b0b048ac9bf4cece3010202b/system.journal corrupted or uncleanly shut down, renaming and replacing.
  473. [    7.217880] rpi-gpiomem 107d508500.gpiomem: window base 0x107d508500 size 0x00000040
  474. [    7.218053] rpi-gpiomem 107d508500.gpiomem: initialised 1 regions as /dev/gpiomem1
  475. [    7.218101] rpi-gpiomem 107d517c00.gpiomem: window base 0x107d517c00 size 0x00000040
  476. [    7.218236] rpi-gpiomem 107d517c00.gpiomem: initialised 1 regions as /dev/gpiomem2
  477. [    7.218274] rpi-gpiomem 107d504100.gpiomem: window base 0x107d504100 size 0x00000020
  478. [    7.218394] rpi-gpiomem 107d504100.gpiomem: initialised 1 regions as /dev/gpiomem3
  479. [    7.218433] rpi-gpiomem 107d510700.gpiomem: window base 0x107d510700 size 0x00000020
  480. [    7.218481] rpi-gpiomem 107d510700.gpiomem: initialised 1 regions as /dev/gpiomem4
  481. [    7.218694] rpi-gpiomem 1f000d0000.gpiomem: window base 0x1f000d0000 size 0x00030000
  482. [    7.218792] rpi-gpiomem 1f000d0000.gpiomem: initialised 1 regions as /dev/gpiomem0
  483. [    7.235658] [drm] Initialized v3d 1.0.0 20180419 for 1002000000.v3d on minor 0
  484. [    7.260122] mc: Linux media interface: v0.10
  485. [    7.304009] cfg80211: Loading compiled-in X.509 certificates for regulatory database
  486. [    7.310802] Loaded X.509 cert 'benh@debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf'
  487. [    7.311132] Loaded X.509 cert 'romain.perier@gmail.com: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328'
  488. [    7.311446] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
  489. [    7.311756] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
  490. [    7.351020] videodev: Linux video capture interface: v2.00
  491. [    7.469256] rpivid_hevc: module is from the staging directory, the quality is unknown, you have been warned.
  492. [    7.475131] rpivid 1000800000.codec: bcm2712_iommu_of_xlate: MMU 1000005100.iommu
  493. [    7.481112] rpivid 1000800000.codec: Device registered as /dev/video19
  494. [    7.482947] pispbe 1000880000.pisp_be: bcm2712_iommu_of_xlate: MMU 1000005100.iommu
  495. [    7.483042] pispbe 1000880000.pisp_be: pispbe_probe: HW version:  0x02252700
  496. [    7.483046] pispbe 1000880000.pisp_be: pispbe_probe: BatchStatus: 0x00000000
  497. [    7.483048] pispbe 1000880000.pisp_be: pispbe_probe: Status:      0x00000000
  498. [    7.483051] pispbe 1000880000.pisp_be: Register nodes for group 0
  499. [    7.483575] pispbe 1000880000.pisp_be: input device node registered as /dev/video20
  500. [    7.486261] pispbe 1000880000.pisp_be: tdn_input device node registered as /dev/video21
  501. [    7.486518] pispbe 1000880000.pisp_be: stitch_input device node registered as /dev/video22
  502. [    7.486568] pispbe 1000880000.pisp_be: hog_output device node registered as /dev/video23
  503. [    7.486607] pispbe 1000880000.pisp_be: output0 device node registered as /dev/video24
  504. [    7.486643] pispbe 1000880000.pisp_be: output1 device node registered as /dev/video25
  505. [    7.486675] pispbe 1000880000.pisp_be: tdn_output device node registered as /dev/video26
  506. [    7.486705] pispbe 1000880000.pisp_be: stitch_output device node registered as /dev/video27
  507. [    7.486745] pispbe 1000880000.pisp_be: config device node registered as /dev/video28
  508. [    7.486990] pispbe 1000880000.pisp_be: Register nodes for group 1
  509. [    7.487038] pispbe 1000880000.pisp_be: input device node registered as /dev/video29
  510. [    7.487070] pispbe 1000880000.pisp_be: tdn_input device node registered as /dev/video30
  511. [    7.487099] pispbe 1000880000.pisp_be: stitch_input device node registered as /dev/video31
  512. [    7.487130] pispbe 1000880000.pisp_be: hog_output device node registered as /dev/video32
  513. [    7.487159] pispbe 1000880000.pisp_be: output0 device node registered as /dev/video33
  514. [    7.487193] pispbe 1000880000.pisp_be: output1 device node registered as /dev/video34
  515. [    7.487223] pispbe 1000880000.pisp_be: tdn_output device node registered as /dev/video35
  516. [    7.487254] pispbe 1000880000.pisp_be: stitch_output device node registered as /dev/video36
  517. [    7.487286] pispbe 1000880000.pisp_be: config device node registered as /dev/video37
  518. [    7.537903] macb 1f00100000.ethernet end0: PHY [1f00100000.ethernet-ffffffff:01] driver [Broadcom BCM54213PE] (irq=POLL)
  519. [    7.537914] macb 1f00100000.ethernet end0: configuring for phy/rgmii-id link mode
  520. [    7.541461] pps pps0: new PPS source ptp0
  521. [    7.541555] macb 1f00100000.ethernet: gem-ptp-timer ptp clock registered.
  522. [    7.545473] Bluetooth: Core ver 2.22
  523. [    7.545524] NET: Registered PF_BLUETOOTH protocol family
  524. [    7.545527] Bluetooth: HCI device and connection manager initialized
  525. [    7.545537] Bluetooth: HCI socket layer initialized
  526. [    7.545541] Bluetooth: L2CAP socket layer initialized
  527. [    7.545546] Bluetooth: SCO socket layer initialized
  528. [    7.551516] sd 0:0:0:0: Attached scsi generic sg0 type 0
  529. [    7.564859] brcmfmac: F1 signature read @0x18000000=0x15264345
  530. [    7.570570] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
  531. [    7.570794] usbcore: registered new interface driver brcmfmac
  532. [    7.575205] Bluetooth: HCI UART driver ver 2.3
  533. [    7.575216] Bluetooth: HCI UART protocol H4 registered
  534. [    7.575269] Bluetooth: HCI UART protocol Three-wire (H5) registered
  535. [    7.575488] hci_uart_bcm serial0-0: supply vbat not found, using dummy regulator
  536. [    7.575556] hci_uart_bcm serial0-0: supply vddio not found, using dummy regulator
  537. [    7.575593] Bluetooth: HCI UART protocol Broadcom registered
  538. [    7.825611] brcmfmac: brcmf_c_process_txcap_blob: no txcap_blob available (err=-2)
  539. [    7.826518] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Apr 15 2021 03:03:20 version 7.45.234 (4ca95bb CY) FWID 01-996384e2
  540. [    7.904908] vc4-drm axi:gpu: bcm2712_iommu_of_xlate: MMU 1000005200.iommu
  541. [    7.909642] vc4-drm axi:gpu: bound 107c580000.hvs (ops vc4_hvs_ops [vc4])
  542. [    7.912596] Registered IR keymap rc-cec
  543. [    7.912697] rc rc0: vc4-hdmi-0 as /devices/platform/soc/107c701400.hdmi/rc/rc0
  544. [    7.912766] input: vc4-hdmi-0 as /devices/platform/soc/107c701400.hdmi/rc/rc0/input1
  545. [    7.918629] input: vc4-hdmi-0 HDMI Jack as /devices/platform/soc/107c701400.hdmi/sound/card0/input2
  546. [    7.919082] vc4-drm axi:gpu: bound 107c701400.hdmi (ops vc4_hdmi_ops [vc4])
  547. [    7.923610] Registered IR keymap rc-cec
  548. [    7.923675] rc rc1: vc4-hdmi-1 as /devices/platform/soc/107c706400.hdmi/rc/rc1
  549. [    7.926237] input: vc4-hdmi-1 as /devices/platform/soc/107c706400.hdmi/rc/rc1/input3
  550. [    7.928106] input: vc4-hdmi-1 HDMI Jack as /devices/platform/soc/107c706400.hdmi/sound/card1/input4
  551. [    7.928292] vc4-drm axi:gpu: bound 107c706400.hdmi (ops vc4_hdmi_ops [vc4])
  552. [    7.928441] vc4-drm axi:gpu: bound 107c500000.mop (ops vc4_txp_ops [vc4])
  553. [    7.928542] vc4-drm axi:gpu: bound 107c501000.moplet (ops vc4_txp_ops [vc4])
  554. [    7.929188] vc4-drm axi:gpu: bound 107c410000.pixelvalve (ops vc4_crtc_ops [vc4])
  555. [    7.929290] vc4-drm axi:gpu: bound 107c411000.pixelvalve (ops vc4_crtc_ops [vc4])
  556. [    7.932899] [drm] Initialized vc4 0.0.0 20140616 for axi:gpu on minor 1
  557. [    7.934997] vc4-drm axi:gpu: [drm] Cannot find any crtc or sizes
  558. [    7.937112] vc4-drm axi:gpu: [drm] Cannot find any crtc or sizes
  559. [    7.937856] Bluetooth: hci0: BCM: chip id 107
  560. [    7.938879] Bluetooth: hci0: BCM: features 0x2f
  561. [    7.939966] vc4-drm axi:gpu: [drm] Cannot find any crtc or sizes
  562. [    7.940057] Bluetooth: hci0: BCM4345C0
  563. [    7.940061] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0000
  564. [    7.952476] Bluetooth: hci0: BCM4345C0 'brcm/BCM4345C0.raspberrypi,5-model-b.hcd' Patch
  565. [    8.633943] Bluetooth: hci0: BCM: features 0x2f
  566. [    8.635303] Bluetooth: hci0: BCM43455 37.4MHz Raspberry Pi 3+-0190
  567. [    8.635305] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0382
  568. [    8.635598] Bluetooth: hci0: BCM: Using default device address (43:45:c0:00:1f:ac)
  569. [    8.660752] EXT4-fs (sda1): mounted filesystem dd4e8ee9-f83b-4a09-b9fb-9b6258b1609e r/w with ordered data mode. Quota mode: journalled.
  570. [   10.602435] macb 1f00100000.ethernet end0: Link is Up - 1Gbps/Full - flow control off
  571. [   12.956010] Adding 204784k swap on /var/swap.  Priority:-2 extents:3 across:229360k SS
  572. [   13.234607] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  573. [   13.234620] Bluetooth: BNEP filters: protocol multicast
  574. [   13.234628] Bluetooth: BNEP socket layer initialized
  575. [   13.236621] Bluetooth: MGMT ver 1.22
  576. [   13.248053] NET: Registered PF_ALG protocol family
  577. [   15.316808] tun: Universal TUN/TAP device driver, 1.6
  578. [  610.780315] systemd[1679]: memfd_create() called without MFD_EXEC or MFD_NOEXEC_SEAL set
  579. [  610.972858] systemd-journald[316]: File /var/log/journal/fbc2fa96b0b048ac9bf4cece3010202b/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.
  580. [  748.213606] EXT4-fs (sda1): unmounting filesystem dd4e8ee9-f83b-4a09-b9fb-9b6258b1609e.
  581. [  826.161538] EXT4-fs (sda1): mounted filesystem dd4e8ee9-f83b-4a09-b9fb-9b6258b1609e r/w with ordered data mode. Quota mode: journalled.
  582. [  987.291567] EXT4-fs (sda1): unmounting filesystem dd4e8ee9-f83b-4a09-b9fb-9b6258b1609e.
  583. [ 1067.329236] EXT4-fs (sda1): mounted filesystem dd4e8ee9-f83b-4a09-b9fb-9b6258b1609e r/w with ordered data mode. Quota mode: journalled.
  584. [ 5983.583287] sd 0:0:0:0: [sda] tag#24 uas_eh_abort_handler 0 uas-tag 9 inflight: CMD IN
  585. [ 5983.583296] sd 0:0:0:0: [sda] tag#24 CDB: opcode=0x28 28 00 00 17 de 80 00 00 20 00
  586. [ 5983.583391] sd 0:0:0:0: [sda] tag#23 uas_eh_abort_handler 0 uas-tag 8 inflight: CMD IN
  587. [ 5983.583395] sd 0:0:0:0: [sda] tag#23 CDB: opcode=0x28 28 00 00 17 da 80 00 04 00 00
  588. [ 5983.583489] sd 0:0:0:0: [sda] tag#22 uas_eh_abort_handler 0 uas-tag 7 inflight: CMD IN
  589. [ 5983.583491] sd 0:0:0:0: [sda] tag#22 CDB: opcode=0x28 28 00 00 17 d6 80 00 04 00 00
  590. [ 5983.583580] sd 0:0:0:0: [sda] tag#21 uas_eh_abort_handler 0 uas-tag 6 inflight: CMD IN
  591. [ 5983.583583] sd 0:0:0:0: [sda] tag#21 CDB: opcode=0x28 28 00 00 17 d2 80 00 04 00 00
  592. [ 5983.583668] sd 0:0:0:0: [sda] tag#20 uas_eh_abort_handler 0 uas-tag 5 inflight: CMD IN
  593. [ 5983.583671] sd 0:0:0:0: [sda] tag#20 CDB: opcode=0x28 28 00 00 17 ce 80 00 04 00 00
  594. [ 5983.583755] sd 0:0:0:0: [sda] tag#19 uas_eh_abort_handler 0 uas-tag 4 inflight: CMD IN
  595. [ 5983.583758] sd 0:0:0:0: [sda] tag#19 CDB: opcode=0x28 28 00 00 17 ca 80 00 04 00 00
  596. [ 5987.423305] sd 0:0:0:0: [sda] tag#12 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD OUT
  597. [ 5987.423314] sd 0:0:0:0: [sda] tag#12 CDB: opcode=0x2a 2a 00 3a 05 56 c0 00 00 a0 00
  598. [ 5987.743303] sd 0:0:0:0: [sda] tag#29 uas_eh_abort_handler 0 uas-tag 15 inflight: CMD OUT
  599. [ 5987.743310] sd 0:0:0:0: [sda] tag#29 CDB: opcode=0x2a 2a 00 2e 80 0b 68 00 00 20 00
  600. [ 5987.743412] sd 0:0:0:0: [sda] tag#28 uas_eh_abort_handler 0 uas-tag 14 inflight: CMD OUT
  601. [ 5987.743415] sd 0:0:0:0: [sda] tag#28 CDB: opcode=0x2a 2a 00 2e 80 0b 40 00 00 20 00
  602. [ 5987.743498] sd 0:0:0:0: [sda] tag#27 uas_eh_abort_handler 0 uas-tag 13 inflight: CMD OUT
  603. [ 5987.743501] sd 0:0:0:0: [sda] tag#27 CDB: opcode=0x2a 2a 00 2e 80 0a e8 00 00 50 00
  604. [ 5987.743586] sd 0:0:0:0: [sda] tag#26 uas_eh_abort_handler 0 uas-tag 12 inflight: CMD OUT
  605. [ 5987.743589] sd 0:0:0:0: [sda] tag#26 CDB: opcode=0x2a 2a 00 2e 80 0a 38 00 00 a8 00
  606. [ 5987.743674] sd 0:0:0:0: [sda] tag#25 uas_eh_abort_handler 0 uas-tag 11 inflight: CMD OUT
  607. [ 5987.743677] sd 0:0:0:0: [sda] tag#25 CDB: opcode=0x2a 2a 00 2e 80 09 20 00 01 08 00
  608. [ 5987.743762] sd 0:0:0:0: [sda] tag#18 uas_eh_abort_handler 0 uas-tag 10 inflight: CMD OUT
  609. [ 5987.743765] sd 0:0:0:0: [sda] tag#18 CDB: opcode=0x2a 2a 00 2e 80 09 10 00 00 08 00
  610. [ 5987.743849] sd 0:0:0:0: [sda] tag#17 uas_eh_abort_handler 0 uas-tag 3 inflight: CMD OUT
  611. [ 5987.743852] sd 0:0:0:0: [sda] tag#17 CDB: opcode=0x2a 2a 00 2e 80 09 00 00 00 08 00
  612. [ 5987.743937] sd 0:0:0:0: [sda] tag#16 uas_eh_abort_handler 0 uas-tag 2 inflight: CMD OUT
  613. [ 5987.743939] sd 0:0:0:0: [sda] tag#16 CDB: opcode=0x2a 2a 00 00 00 08 00 00 00 08 00
  614. [ 5987.744025] sd 0:0:0:0: [sda] tag#5 uas_eh_abort_handler 0 uas-tag 21 inflight: CMD OUT
  615. [ 5987.744027] sd 0:0:0:0: [sda] tag#5 CDB: opcode=0x2a 2a 00 2e 80 22 90 00 00 08 00
  616. [ 5987.744113] sd 0:0:0:0: [sda] tag#4 uas_eh_abort_handler 0 uas-tag 20 inflight: CMD OUT
  617. [ 5987.744116] sd 0:0:0:0: [sda] tag#4 CDB: opcode=0x2a 2a 00 2e 80 0c b0 00 02 90 00
  618. [ 5987.744201] sd 0:0:0:0: [sda] tag#3 uas_eh_abort_handler 0 uas-tag 19 inflight: CMD OUT
  619. [ 5987.744204] sd 0:0:0:0: [sda] tag#3 CDB: opcode=0x2a 2a 00 2e 80 0b e0 00 00 c8 00
  620. [ 5987.744288] sd 0:0:0:0: [sda] tag#2 uas_eh_abort_handler 0 uas-tag 18 inflight: CMD OUT
  621. [ 5987.744291] sd 0:0:0:0: [sda] tag#2 CDB: opcode=0x2a 2a 00 2e 80 0b d0 00 00 08 00
  622. [ 5987.744376] sd 0:0:0:0: [sda] tag#1 uas_eh_abort_handler 0 uas-tag 17 inflight: CMD OUT
  623. [ 5987.744378] sd 0:0:0:0: [sda] tag#1 CDB: opcode=0x2a 2a 00 2e 80 0b a8 00 00 10 00
  624. [ 5987.744463] sd 0:0:0:0: [sda] tag#0 uas_eh_abort_handler 0 uas-tag 16 inflight: CMD OUT
  625. [ 5987.744466] sd 0:0:0:0: [sda] tag#0 CDB: opcode=0x2a 2a 00 2e 80 0b 90 00 00 10 00
  626. [ 5987.759337] scsi host0: uas_eh_device_reset_handler start
  627. [ 5987.887754] usb 2-1: reset SuperSpeed USB device number 2 using xhci-hcd
  628. [ 5987.970664] usb 2-1: Enable of device-initiated U1 failed.
  629. [ 5987.971125] usb 2-1: Enable of device-initiated U2 failed.
  630. [ 5987.971525] scsi host0: uas_eh_device_reset_handler success
  631. [ 5998.147353] sd 0:0:0:0: [sda] tag#24 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD
  632. [ 5998.147362] sd 0:0:0:0: [sda] tag#24 CDB: opcode=0x0 00 00 00 00 00 00
  633. [ 5998.147366] scsi host0: uas_eh_device_reset_handler start
  634. [ 5998.279778] usb 2-1: reset SuperSpeed USB device number 2 using xhci-hcd
  635. [ 5998.359315] usb 2-1: Enable of device-initiated U1 failed.
  636. [ 5998.359783] usb 2-1: Enable of device-initiated U2 failed.
  637. [ 5998.360141] scsi host0: uas_eh_device_reset_handler success
  638. [ 5998.360149] sd 0:0:0:0: Device offlined - not ready after error recovery
  639. [ 5998.360152] sd 0:0:0:0: Device offlined - not ready after error recovery
  640. [ 5998.360154] sd 0:0:0:0: Device offlined - not ready after error recovery
  641. [ 5998.360157] sd 0:0:0:0: Device offlined - not ready after error recovery
  642. [ 5998.360159] sd 0:0:0:0: Device offlined - not ready after error recovery
  643. [ 5998.360161] sd 0:0:0:0: Device offlined - not ready after error recovery
  644. [ 5998.360163] sd 0:0:0:0: Device offlined - not ready after error recovery
  645. [ 5998.360165] sd 0:0:0:0: Device offlined - not ready after error recovery
  646. [ 5998.360168] sd 0:0:0:0: Device offlined - not ready after error recovery
  647. [ 5998.360170] sd 0:0:0:0: Device offlined - not ready after error recovery
  648. [ 5998.360172] sd 0:0:0:0: Device offlined - not ready after error recovery
  649. [ 5998.360174] sd 0:0:0:0: Device offlined - not ready after error recovery
  650. [ 5998.360176] sd 0:0:0:0: Device offlined - not ready after error recovery
  651. [ 5998.360178] sd 0:0:0:0: Device offlined - not ready after error recovery
  652. [ 5998.360181] sd 0:0:0:0: Device offlined - not ready after error recovery
  653. [ 5998.360183] sd 0:0:0:0: Device offlined - not ready after error recovery
  654. [ 5998.360185] sd 0:0:0:0: Device offlined - not ready after error recovery
  655. [ 5998.360187] sd 0:0:0:0: Device offlined - not ready after error recovery
  656. [ 5998.360189] sd 0:0:0:0: Device offlined - not ready after error recovery
  657. [ 5998.360191] sd 0:0:0:0: Device offlined - not ready after error recovery
  658. [ 5998.360194] sd 0:0:0:0: Device offlined - not ready after error recovery
  659. [ 5998.360210] sd 0:0:0:0: [sda] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x03 driverbyte=DRIVER_OK cmd_age=40s
  660. [ 5998.360214] sd 0:0:0:0: [sda] tag#0 CDB: opcode=0x2a 2a 00 2e 80 0b 90 00 00 10 00
  661. [ 5998.360217] I/O error, dev sda, sector 780143504 op 0x1:(WRITE) flags 0x3000 phys_seg 2 prio class 2
  662. [ 5998.360222] Buffer I/O error on dev sda1, logical block 97517682, lost async page write
  663. [ 5998.360227] Buffer I/O error on dev sda1, logical block 97517683, lost async page write
  664. [ 5998.360238] sd 0:0:0:0: [sda] tag#1 UNKNOWN(0x2003) Result: hostbyte=0x03 driverbyte=DRIVER_OK cmd_age=40s
  665. [ 5998.360241] sd 0:0:0:0: [sda] tag#1 CDB: opcode=0x2a 2a 00 2e 80 0b a8 00 00 10 00
  666. [ 5998.360242] I/O error, dev sda, sector 780143528 op 0x1:(WRITE) flags 0x3000 phys_seg 2 prio class 2
  667. [ 5998.360246] Buffer I/O error on dev sda1, logical block 97517685, lost async page write
  668. [ 5998.360248] Buffer I/O error on dev sda1, logical block 97517686, lost async page write
  669. [ 5998.360259] sd 0:0:0:0: [sda] tag#2 UNKNOWN(0x2003) Result: hostbyte=0x03 driverbyte=DRIVER_OK cmd_age=40s
  670. [ 5998.360262] sd 0:0:0:0: [sda] tag#2 CDB: opcode=0x2a 2a 00 2e 80 0b d0 00 00 08 00
  671. [ 5998.360264] I/O error, dev sda, sector 780143568 op 0x1:(WRITE) flags 0x3000 phys_seg 1 prio class 2
  672. [ 5998.360267] Buffer I/O error on dev sda1, logical block 97517690, lost async page write
  673. [ 5998.360278] sd 0:0:0:0: [sda] tag#3 UNKNOWN(0x2003) Result: hostbyte=0x03 driverbyte=DRIVER_OK cmd_age=40s
  674. [ 5998.360280] sd 0:0:0:0: [sda] tag#3 CDB: opcode=0x2a 2a 00 2e 80 0b e0 00 00 c8 00
  675. [ 5998.360282] I/O error, dev sda, sector 780143584 op 0x1:(WRITE) flags 0x3000 phys_seg 25 prio class 2
  676. [ 5998.360285] Buffer I/O error on dev sda1, logical block 97517692, lost async page write
  677. [ 5998.360288] Buffer I/O error on dev sda1, logical block 97517693, lost async page write
  678. [ 5998.360290] Buffer I/O error on dev sda1, logical block 97517694, lost async page write
  679. [ 5998.360292] Buffer I/O error on dev sda1, logical block 97517695, lost async page write
  680. [ 5998.360295] Buffer I/O error on dev sda1, logical block 97517696, lost async page write
  681. [ 5998.360317] sd 0:0:0:0: [sda] tag#4 UNKNOWN(0x2003) Result: hostbyte=0x03 driverbyte=DRIVER_OK cmd_age=40s
  682. [ 5998.360320] sd 0:0:0:0: [sda] tag#4 CDB: opcode=0x2a 2a 00 2e 80 0c b0 00 02 90 00
  683. [ 5998.360322] I/O error, dev sda, sector 780143792 op 0x1:(WRITE) flags 0x3000 phys_seg 82 prio class 2
  684. [ 5998.360361] sd 0:0:0:0: [sda] tag#5 UNKNOWN(0x2003) Result: hostbyte=0x03 driverbyte=DRIVER_OK cmd_age=40s
  685. [ 5998.360364] sd 0:0:0:0: [sda] tag#5 CDB: opcode=0x2a 2a 00 2e 80 22 90 00 00 08 00
  686. [ 5998.360366] I/O error, dev sda, sector 780149392 op 0x1:(WRITE) flags 0x3000 phys_seg 1 prio class 2
  687. [ 5998.360373] sd 0:0:0:0: [sda] tag#16 UNKNOWN(0x2003) Result: hostbyte=0x03 driverbyte=DRIVER_OK cmd_age=40s
  688. [ 5998.360376] sd 0:0:0:0: [sda] tag#16 CDB: opcode=0x2a 2a 00 00 00 08 00 00 00 08 00
  689. [ 5998.360378] I/O error, dev sda, sector 2048 op 0x1:(WRITE) flags 0x3000 phys_seg 1 prio class 2
  690. [ 5998.360387] sd 0:0:0:0: [sda] tag#17 UNKNOWN(0x2003) Result: hostbyte=0x03 driverbyte=DRIVER_OK cmd_age=40s
  691. [ 5998.360390] sd 0:0:0:0: [sda] tag#17 CDB: opcode=0x2a 2a 00 2e 80 09 00 00 00 08 00
  692. [ 5998.360392] I/O error, dev sda, sector 780142848 op 0x1:(WRITE) flags 0x3000 phys_seg 1 prio class 2
  693. [ 5998.360398] sd 0:0:0:0: [sda] tag#18 UNKNOWN(0x2003) Result: hostbyte=0x03 driverbyte=DRIVER_OK cmd_age=40s
  694. [ 5998.360401] sd 0:0:0:0: [sda] tag#18 CDB: opcode=0x2a 2a 00 2e 80 09 10 00 00 08 00
  695. [ 5998.360403] I/O error, dev sda, sector 780142864 op 0x1:(WRITE) flags 0x3000 phys_seg 1 prio class 2
  696. [ 5998.360413] sd 0:0:0:0: [sda] tag#25 UNKNOWN(0x2003) Result: hostbyte=0x03 driverbyte=DRIVER_OK cmd_age=40s
  697. [ 5998.360416] sd 0:0:0:0: [sda] tag#25 CDB: opcode=0x2a 2a 00 2e 80 09 20 00 01 08 00
  698. [ 5998.360418] I/O error, dev sda, sector 780142880 op 0x1:(WRITE) flags 0x3000 phys_seg 33 prio class 2
  699. [ 5998.360486] Aborting journal on device sda1-8.
  700. [ 5998.360510] sd 0:0:0:0: rejecting I/O to offline device
  701. [ 5998.360521] JBD2: I/O error when updating journal superblock for sda1-8.
  702. [ 5998.360562] EXT4-fs error (device sda1): ext4_journal_check_start:84: comm borg: Detected aborted journal
  703. [ 5998.370197] EXT4-fs (sda1): previous I/O error to superblock detected
  704. [ 5998.370210] EXT4-fs (sda1): I/O error while writing superblock
  705. [ 5998.370212] EXT4-fs (sda1): Remounting filesystem read-only
  706. [33419.805493] blk_print_req_error: 43 callbacks suppressed
  707. [33419.805498] I/O error, dev sda, sector 1266682112 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 2
  708. [33419.805508] I/O error, dev sda, sector 1266682120 op 0x0:(READ) flags 0x80700 phys_seg 30 prio class 2
  709. [33419.808381] I/O error, dev sda, sector 1920993536 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 2
  710. [72567.009809] I/O error, dev sda, sector 1266682120 op 0x0:(READ) flags 0x80700 phys_seg 30 prio class 2
  711. [72567.009828] I/O error, dev sda, sector 1266682112 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 2
  712. [72567.009955] I/O error, dev sda, sector 1266682112 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 2
  713. [72567.009962] I/O error, dev sda, sector 1266682120 op 0x0:(READ) flags 0x80700 phys_seg 30 prio class 2
  714. [72567.010221] I/O error, dev sda, sector 1920993536 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 2
  715. [72567.010291] I/O error, dev sda, sector 1920993536 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 2
  716. [72567.010833] I/O error, dev sda, sector 1266682120 op 0x0:(READ) flags 0x80700 phys_seg 30 prio class 2
  717. [72567.010844] I/O error, dev sda, sector 1266682112 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 2
  718. [72567.010932] I/O error, dev sda, sector 1266682112 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 2
  719. [72567.010937] I/O error, dev sda, sector 1266682120 op 0x0:(READ) flags 0x80700 phys_seg 30 prio class 2
  720. [72685.588000] blk_print_req_error: 62 callbacks suppressed
  721. [72685.588005] I/O error, dev sda, sector 1266682120 op 0x0:(READ) flags 0x80700 phys_seg 30 prio class 2
  722. [72685.588023] I/O error, dev sda, sector 1266682112 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 2
  723. [72685.588142] I/O error, dev sda, sector 1266682112 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 2
  724. [72685.588148] I/O error, dev sda, sector 1266682120 op 0x0:(READ) flags 0x80700 phys_seg 30 prio class 2
  725. [72685.589182] I/O error, dev sda, sector 1266682120 op 0x0:(READ) flags 0x80700 phys_seg 30 prio class 2
  726. [72685.589198] I/O error, dev sda, sector 1266682112 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 2
  727. [72685.589304] I/O error, dev sda, sector 1266682112 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 2
  728. [72685.589309] I/O error, dev sda, sector 1266682120 op 0x0:(READ) flags 0x80700 phys_seg 30 prio class 2
  729. [72685.590109] I/O error, dev sda, sector 1266682120 op 0x0:(READ) flags 0x80700 phys_seg 30 prio class 2
  730. [72685.590123] I/O error, dev sda, sector 1266682112 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 2
  731. [72787.515664] blk_print_req_error: 38 callbacks suppressed
  732. [72787.515669] I/O error, dev sda, sector 1266682120 op 0x0:(READ) flags 0x80700 phys_seg 30 prio class 2
  733. [72787.515685] I/O error, dev sda, sector 1266682112 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 2
  734. [72787.515796] I/O error, dev sda, sector 1266682112 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 2
  735. [72787.515801] I/O error, dev sda, sector 1266682120 op 0x0:(READ) flags 0x80700 phys_seg 30 prio class 2
  736. [72787.516810] I/O error, dev sda, sector 1266682120 op 0x0:(READ) flags 0x80700 phys_seg 30 prio class 2
  737. [72787.516825] I/O error, dev sda, sector 1266682112 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 2
  738. [72787.516917] I/O error, dev sda, sector 1266682112 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 2
  739. [72787.516922] I/O error, dev sda, sector 1266682120 op 0x0:(READ) flags 0x80700 phys_seg 30 prio class 2
  740. [72787.517778] I/O error, dev sda, sector 1266682120 op 0x0:(READ) flags 0x80700 phys_seg 30 prio class 2
  741. [72787.517791] I/O error, dev sda, sector 1266682112 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 2
  742. [73700.815558] blk_print_req_error: 182 callbacks suppressed
  743. [73700.815563] I/O error, dev sda, sector 1266682120 op 0x0:(READ) flags 0x80700 phys_seg 30 prio class 2
  744. [73700.815580] I/O error, dev sda, sector 1266682112 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 2
  745. [73700.815692] I/O error, dev sda, sector 1266682112 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 2
  746. [73700.815698] I/O error, dev sda, sector 1266682120 op 0x0:(READ) flags 0x80700 phys_seg 30 prio class 2
  747. [73700.816356] I/O error, dev sda, sector 1920993536 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 2
  748. [73700.816440] I/O error, dev sda, sector 1920993536 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 2
  749. [73700.818579] I/O error, dev sda, sector 1266682120 op 0x0:(READ) flags 0x80700 phys_seg 30 prio class 2
  750. [73700.818592] I/O error, dev sda, sector 1266682112 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 2
  751. [73700.818683] I/O error, dev sda, sector 1266682112 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 2
  752. [73700.818688] I/O error, dev sda, sector 1266682120 op 0x0:(READ) flags 0x80700 phys_seg 30 prio class 2
  753.  

Quellcode

Hier kannst du den Code kopieren und ihn in deinen bevorzugten Editor einfügen. PASTEBIN_DOWNLOAD_SNIPPET_EXPLAIN

Verlinken

URL: alles markieren
https://nopaste.debianforum.de/42190

BBCode: alles markieren
[NP]42190[/NP]

LATEST_SNIPPETS