NoPaste

usb_nvme_dmesg_out

von HousyHarry
SNIPPET_DESC:
dmesg output when usb enclose with nvme disc is connected
SNIPPET_CREATION_TIME:
17.09.2024 13:55:15
SNIPPET_PRUNE_TIME:
17.10.2024 13:55:15

SNIPPET_TEXT:
  1. [   30.253213] Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
  2. [   30.257709] Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
  3. [   30.263628] Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
  4. [   30.264440] Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
  5. [   30.278976] Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
  6. [   30.284705] Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
  7. [   30.284858] wlp1s0: deauthenticating from 34:e3:80:e3:cb:f3 by local choice (Reason: 3=DEAUTH_LEAVING)
  8. [   30.285538] Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
  9. [   30.333150] Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
  10. [   30.449763] Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
  11. [   30.611616] Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
  12. [   31.248932] PM: suspend entry (s2idle)
  13. [   31.263556] Filesystems sync: 0.014 seconds
  14. [   31.264455] Freezing user space processes
  15. [   31.266440] Freezing user space processes completed (elapsed 0.001 seconds)
  16. [   31.266443] OOM killer disabled.
  17. [   31.266444] Freezing remaining freezable tasks
  18. [   31.267421] Freezing remaining freezable tasks completed (elapsed 0.000 seconds)
  19. [   31.267424] printk: Suspending console(s) (use no_console_suspend to debug)
  20. [   31.274408] atkbd serio0: Disabling IRQ1 wakeup source to avoid platform firmware bug
  21. [   31.379095] ACPI: EC: interrupt blocked
  22. [   31.466372] ACPI: EC: interrupt unblocked
  23. [   74.996025] audit: type=1400 audit(1726316036.245:179): apparmor="DENIED" operation="capable" class="cap" profile="/usr/lib/snapd/snap-confine" pid=3158 comm="snap-confine" capability=12  capname="net_admin"
  24. [   74.996035] audit: type=1400 audit(1726316036.245:180): apparmor="DENIED" operation="capable" class="cap" profile="/usr/lib/snapd/snap-confine" pid=3158 comm="snap-confine" capability=38  capname="perfmon"
  25. [   75.629021] usb 4-1: new SuperSpeed Plus Gen 2x1 USB device number 2 using xhci_hcd
  26. [   75.650115] usb 4-1: New USB device found, idVendor=0bda, idProduct=9210, bcdDevice=31.00
  27. [   75.650129] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  28. [   75.650133] usb 4-1: Product: RTL9210
  29. [   75.650137] usb 4-1: Manufacturer: Realtek
  30. [   75.650139] usb 4-1: SerialNumber: 012345678905
  31. [   75.683791] usbcore: registered new interface driver usb-storage
  32. [   75.751519] scsi host2: uas
  33. [   75.751710] usbcore: registered new interface driver uas
  34. [   75.756737] scsi 2:0:0:0: Direct-Access     Realtek  RTL9210 NVME     1.00 PQ: 0 ANSI: 6
  35. [   75.804903] sd 2:0:0:0: Attached scsi generic sg0 type 0
  36. [   75.810042] sd 2:0:0:0: [sda] 2097151 512-byte logical blocks: (1.07 GB/1024 MiB)
  37. [   75.812096] sd 2:0:0:0: [sda] Write Protect is off
  38. [   75.812102] sd 2:0:0:0: [sda] Mode Sense: 37 00 00 08
  39. [   75.816870] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  40. [   75.818548] sd 2:0:0:0: [sda] Preferred minimum I/O size 512 bytes
  41. [   75.818553] sd 2:0:0:0: [sda] Optimal transfer size 33553920 bytes
  42. [   78.972199] warning: `ThreadPoolForeg' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211
  43. [  106.035827] sd 2:0:0:0: [sda] tag#18 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD IN
  44. [  106.035835] sd 2:0:0:0: [sda] tag#18 CDB: Read(10) 28 00 00 00 00 00 00 00 01 00
  45. [  106.042411] scsi host2: uas_eh_device_reset_handler start
  46. [  106.157303] usb 4-1: reset SuperSpeed Plus Gen 2x1 USB device number 2 using xhci_hcd
  47. [  106.637088] scsi host2: uas_eh_device_reset_handler success
  48. [  136.756719] sd 2:0:0:0: [sda] tag#2 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD IN
  49. [  136.756738] sd 2:0:0:0: [sda] tag#2 CDB: Read(10) 28 00 00 00 00 00 00 00 08 00
  50. [  136.762513] scsi host2: uas_eh_device_reset_handler start
  51. [  136.878287] usb 4-1: reset SuperSpeed Plus Gen 2x1 USB device number 2 using xhci_hcd
  52. [  137.357436] scsi host2: uas_eh_device_reset_handler success
  53. [  167.486703] sd 2:0:0:0: [sda] tag#16 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD IN
  54. [  167.486722] sd 2:0:0:0: [sda] tag#16 CDB: Read(10) 28 00 00 00 00 08 00 00 08 00
  55. [  167.496392] scsi host2: uas_eh_device_reset_handler start
  56. [  173.090766] xhci_hcd 0000:03:00.4: Timeout while waiting for setup device command
  57. [  178.724411] xhci_hcd 0000:03:00.4: Timeout while waiting for setup device command
  58. [  178.930415] usb 4-1: device not accepting address 2, error -62
  59. [  184.354726] xhci_hcd 0000:03:00.4: Timeout while waiting for setup device command
  60. [  189.986777] xhci_hcd 0000:03:00.4: Timeout while waiting for setup device command
  61. [  190.194682] usb 4-1: device not accepting address 2, error -62
  62. [  190.387128] usb 4-1: Device not responding to setup address.
  63. [  190.603168] usb 4-1: Device not responding to setup address.
  64. [  190.810712] usb 4-1: device not accepting address 2, error -71
  65. [  191.003075] usb 4-1: Device not responding to setup address.
  66. [  191.218982] usb 4-1: Device not responding to setup address.
  67. [  191.426384] usb 4-1: device not accepting address 2, error -71
  68. [  191.442608] scsi host2: uas_eh_device_reset_handler FAILED err -19
  69. [  191.442622] sd 2:0:0:0: Device offlined - not ready after error recovery
  70. [  191.442652] usb 4-1: USB disconnect, device number 2
  71. [  191.450400] device offline error, dev sda, sector 8 op 0x0:(READ) flags 0x0 phys_seg 8 prio class 0
  72. [  191.450417] Buffer I/O error on dev sda, logical block 8, async page read
  73. [  191.450424] Buffer I/O error on dev sda, logical block 9, async page read
  74. [  191.450427] Buffer I/O error on dev sda, logical block 10, async page read
  75. [  191.450431] Buffer I/O error on dev sda, logical block 11, async page read
  76. [  191.450435] Buffer I/O error on dev sda, logical block 12, async page read
  77. [  191.450438] Buffer I/O error on dev sda, logical block 13, async page read
  78. [  191.450441] Buffer I/O error on dev sda, logical block 14, async page read
  79. [  191.450444] Buffer I/O error on dev sda, logical block 15, async page read
  80. [  191.450486] Dev sda: unable to read RDB block 8
  81. [  191.450567] device offline error, dev sda, sector 24 op 0x0:(READ) flags 0x0 phys_seg 8 prio class 0
  82. [  191.450576] Buffer I/O error on dev sda, logical block 24, async page read
  83. [  191.450582] Buffer I/O error on dev sda, logical block 25, async page read
  84. [  191.450604]  sda: unable to read partition table
  85. [  191.450707] sd 2:0:0:0: [sda] Attached SCSI disk
  86. [  191.472395] sd 2:0:0:0: [sda] Synchronizing SCSI cache
  87. [  191.563698] systemd[1]: Starting apport-autoreport.service - Process error reports when automatic reporting is enabled...
  88. [  191.565573] systemd[1]: Started whoopsie.service - crash report submission.
  89. [  191.583083] systemd[1]: whoopsie.service: Deactivated successfully.
  90. [  191.597364] sd 2:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
  91. [  191.676846] systemd[1]: Started whoopsie.service - crash report submission.
  92. [  191.682899] systemd[1]: apport-autoreport.service: Deactivated successfully.
  93. [  191.683182] systemd[1]: Finished apport-autoreport.service - Process error reports when automatic reporting is enabled.
  94. [  191.685835] systemd[1]: whoopsie.service: Deactivated successfully.
  95. [  191.789570] usb 4-1: Device not responding to setup address.
  96. [  192.002567] usb 4-1: Device not responding to setup address.
  97. [  192.210417] usb 4-1: device not accepting address 3, error -71
  98. [  192.402517] usb 4-1: Device not responding to setup address.
  99. [  192.618488] usb 4-1: Device not responding to setup address.
  100. [  192.826388] usb 4-1: device not accepting address 4, error -71
  101. [  192.834582] usb usb4-port1: attempt power cycle
  102. [  193.037628] systemd[1]: Starting apport-autoreport.service - Process error reports when automatic reporting is enabled...
  103. [  193.038841] systemd[1]: Started whoopsie.service - crash report submission.
  104. [  193.055677] systemd[1]: whoopsie.service: Deactivated successfully.
  105. [  193.076675] systemd[1]: systemd-journald.service: Main process exited, code=dumped, status=6/ABRT
  106. [  193.076728] systemd[1]: systemd-journald.service: Failed with result 'watchdog'.
  107. [  193.077393] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1.
  108. [  193.087164] systemd[1]: Starting systemd-journald.service - Journal Service...
  109. [  193.096208] systemd-journald[3857]: Collecting audit messages is disabled.
  110. [  193.096630] systemd-journald[3857]: File /var/log/journal/5bc31360fd064a63bdb035079c5f0047/system.journal corrupted or uncleanly shut down, renaming and replacing.
  111. [  193.104934] systemd[1]: Started systemd-journald.service - Journal Service.
  112. [  193.105205] systemd-journald[3857]: File /var/log/journal/5bc31360fd064a63bdb035079c5f0047/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.
  113. [  193.742538] usb 4-1: Device not responding to setup address.
  114. [  193.958506] usb 4-1: Device not responding to setup address.
  115. [  194.162377] usb 4-1: device not accepting address 5, error -71
  116. [  194.353474] usb 4-1: Device not responding to setup address.
  117. [  194.571432] usb 4-1: Device not responding to setup address.
  118. [  194.778365] usb 4-1: device not accepting address 6, error -71
  119. [  194.786479] usb usb4-port1: unable to enumerate USB device
  120. [  196.210570] usb 4-1: Device not responding to setup address.
  121. [  196.427218] usb 4-1: Device not responding to setup address.
  122. [  196.634717] usb 4-1: device not accepting address 7, error -71
  123. [  196.827165] usb 4-1: Device not responding to setup address.
  124. [  197.043148] usb 4-1: Device not responding to setup address.
  125. [  197.250685] usb 4-1: device not accepting address 8, error -71
  126. [  197.259099] usb usb4-port1: attempt power cycle
  127. [  198.167271] usb 4-1: Device not responding to setup address.
  128. [  198.378804] usb 4-1: Device not responding to setup address.
  129. [  198.586749] usb 4-1: device not accepting address 9, error -71
  130. [  198.778781] usb 4-1: Device not responding to setup address.
  131. [  198.994915] usb 4-1: Device not responding to setup address.
  132. [  199.202588] usb 4-1: device not accepting address 10, error -71
  133. [  199.210987] usb usb4-port1: unable to enumerate USB device
  134. [  294.029156] usb 2-1: new SuperSpeed Plus Gen 2x1 USB device number 2 using xhci_hcd
  135. [  294.049772] usb 2-1: New USB device found, idVendor=0bda, idProduct=9210, bcdDevice=31.00
  136. [  294.049785] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  137. [  294.049789] usb 2-1: Product: RTL9210
  138. [  294.049792] usb 2-1: Manufacturer: Realtek
  139. [  294.049795] usb 2-1: SerialNumber: 012345678905
  140. [  294.104301] scsi host2: uas
  141. [  294.109179] scsi 2:0:0:0: Direct-Access     Realtek  RTL9210 NVME     1.00 PQ: 0 ANSI: 6
  142. [  294.159412] sd 2:0:0:0: Attached scsi generic sg0 type 0
  143. [  294.164549] sd 2:0:0:0: [sda] 2097151 512-byte logical blocks: (1.07 GB/1024 MiB)
  144. [  294.166625] sd 2:0:0:0: [sda] Write Protect is off
  145. [  294.166629] sd 2:0:0:0: [sda] Mode Sense: 37 00 00 08
  146. [  294.171529] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  147. [  294.173245] sd 2:0:0:0: [sda] Preferred minimum I/O size 512 bytes
  148. [  294.173248] sd 2:0:0:0: [sda] Optimal transfer size 33553920 bytes
  149. [  324.659669] sd 2:0:0:0: [sda] tag#9 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD IN
  150. [  324.659682] sd 2:0:0:0: [sda] tag#9 CDB: Read(10) 28 00 00 00 00 00 00 00 01 00
  151. [  324.665399] scsi host2: uas_eh_device_reset_handler start
  152. [  324.779881] usb 2-1: reset SuperSpeed Plus Gen 2x1 USB device number 2 using xhci_hcd
  153. [  325.257541] scsi host2: uas_eh_device_reset_handler success
  154. [  355.379740] sd 2:0:0:0: [sda] tag#5 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD IN
  155. [  355.379759] sd 2:0:0:0: [sda] tag#5 CDB: Read(10) 28 00 00 00 00 00 00 00 08 00
  156. [  355.385400] scsi host2: uas_eh_device_reset_handler start
  157. [  355.500218] usb 2-1: reset SuperSpeed Plus Gen 2x1 USB device number 2 using xhci_hcd
  158. [  355.971374] scsi host2: uas_eh_device_reset_handler success
  159. [  386.107375] sd 2:0:0:0: [sda] tag#7 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD IN
  160. [  386.107382] sd 2:0:0:0: [sda] tag#7 CDB: Read(10) 28 00 00 00 00 08 00 00 08 00
  161. [  386.116417] scsi host2: uas_eh_device_reset_handler start
  162. [  391.714427] xhci_hcd 0000:03:00.3: Timeout while waiting for setup device command
  163. [  397.346415] xhci_hcd 0000:03:00.3: Timeout while waiting for setup device command
  164. [  397.554408] usb 2-1: device not accepting address 2, error -62
  165. [  402.978399] xhci_hcd 0000:03:00.3: Timeout while waiting for setup device command
  166. [  408.610711] xhci_hcd 0000:03:00.3: Timeout while waiting for setup device command
  167. [  408.818417] usb 2-1: device not accepting address 2, error -62
  168. [  409.010598] usb 2-1: Device not responding to setup address.
  169. [  409.227289] usb 2-1: Device not responding to setup address.
  170. [  409.434361] usb 2-1: device not accepting address 2, error -71
  171. [  409.627024] usb 2-1: Device not responding to setup address.
  172. [  409.842559] usb 2-1: Device not responding to setup address.
  173. [  410.050630] usb 2-1: device not accepting address 2, error -71
  174. [  410.065498] scsi host2: uas_eh_device_reset_handler FAILED err -19
  175. [  410.065511] sd 2:0:0:0: Device offlined - not ready after error recovery
  176. [  410.065540] sd 2:0:0:0: [sda] tag#7 FAILED Result: hostbyte=DID_TIME_OUT driverbyte=DRIVER_OK cmd_age=54s
  177. [  410.065546] sd 2:0:0:0: [sda] tag#7 CDB: Read(10) 28 00 00 00 00 08 00 00 08 00
  178. [  410.065549] I/O error, dev sda, sector 8 op 0x0:(READ) flags 0x0 phys_seg 8 prio class 0
  179. [  410.065559] buffer_io_error: 6 callbacks suppressed
  180. [  410.065561] Buffer I/O error on dev sda, logical block 8, async page read
  181. [  410.065568] Buffer I/O error on dev sda, logical block 9, async page read
  182. [  410.065571] Buffer I/O error on dev sda, logical block 10, async page read
  183. [  410.065574] Buffer I/O error on dev sda, logical block 11, async page read
  184. [  410.065577] Buffer I/O error on dev sda, logical block 12, async page read
  185. [  410.065580] Buffer I/O error on dev sda, logical block 13, async page read
  186. [  410.065583] Buffer I/O error on dev sda, logical block 14, async page read
  187. [  410.065586] Buffer I/O error on dev sda, logical block 15, async page read
  188. [  410.065609] Dev sda: unable to read RDB block 8
  189. [  410.065657] sd 2:0:0:0: rejecting I/O to offline device
  190. [  410.065660] I/O error, dev sda, sector 24 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
  191. [  410.065665] Buffer I/O error on dev sda, logical block 24, async page read
  192. [  410.065680] I/O error, dev sda, sector 25 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
  193. [ 2038.806705] usb 2-2: new SuperSpeed Plus Gen 2x1 USB device number 22 using xhci_hcd
  194. [ 2038.826800] usb 2-2: New USB device found, idVendor=0bda, idProduct=9210, bcdDevice=31.00
  195. [ 2038.826818] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  196. [ 2038.826824] usb 2-2: Product: RTL9210
  197. [ 2038.826828] usb 2-2: Manufacturer: Realtek
  198. [ 2038.826832] usb 2-2: SerialNumber: 012345678905
  199. [ 2038.885874] scsi host3: uas
  200. [ 2038.890780] scsi 3:0:0:0: Direct-Access     Realtek  RTL9210 NVME     1.00 PQ: 0 ANSI: 6
  201. [ 2038.941212] sd 3:0:0:0: Attached scsi generic sg1 type 0
  202. [ 2038.947607] sd 3:0:0:0: [sda] 2097151 512-byte logical blocks: (1.07 GB/1024 MiB)
  203. [ 2038.949707] sd 3:0:0:0: [sda] Write Protect is off
  204. [ 2038.949714] sd 3:0:0:0: [sda] Mode Sense: 37 00 00 08
  205. [ 2038.954573] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  206. [ 2038.956237] sd 3:0:0:0: [sda] Preferred minimum I/O size 512 bytes
  207. [ 2038.956242] sd 3:0:0:0: [sda] Optimal transfer size 33553920 bytes
  208. [ 2069.043455] sd 3:0:0:0: [sda] tag#13 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD IN
  209. [ 2069.043494] sd 3:0:0:0: [sda] tag#13 CDB: Read(10) 28 00 00 00 00 00 00 00 01 00
  210. [ 2069.051423] scsi host3: uas_eh_device_reset_handler start
  211. [ 2069.166798] usb 2-2: reset SuperSpeed Plus Gen 2x1 USB device number 22 using xhci_hcd
  212. [ 2069.644329] scsi host3: uas_eh_device_reset_handler success
  213. [ 2099.764374] sd 3:0:0:0: [sda] tag#15 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD IN
  214. [ 2099.764385] sd 3:0:0:0: [sda] tag#15 CDB: Read(10) 28 00 00 00 00 00 00 00 08 00
  215. [ 2099.770367] scsi host3: uas_eh_device_reset_handler start
  216. [ 2099.886871] usb 2-2: reset SuperSpeed Plus Gen 2x1 USB device number 22 using xhci_hcd
  217. [ 2100.365091] scsi host3: uas_eh_device_reset_handler success
  218. [ 2130.483380] sd 3:0:0:0: [sda] tag#14 uas_eh_abort_handler 0 uas-tag 2 inflight: CMD IN
  219. [ 2130.483402] sd 3:0:0:0: [sda] tag#14 CDB: Read(10) 28 00 00 00 00 09 00 00 07 00
  220. [ 2130.484384] sd 3:0:0:0: [sda] tag#13 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD IN
  221. [ 2130.484394] sd 3:0:0:0: [sda] tag#13 CDB: Read(10) 28 00 00 00 00 08 00 00 01 00
  222. [ 2130.490393] scsi host3: uas_eh_device_reset_handler start
  223. [ 2136.098395] xhci_hcd 0000:03:00.3: Timeout while waiting for setup device command
  224. [ 2141.735622] xhci_hcd 0000:03:00.3: Timeout while waiting for setup device command
  225. [ 2141.938411] usb 2-2: device not accepting address 22, error -62
  226. [ 2147.362491] xhci_hcd 0000:03:00.3: Timeout while waiting for setup device command
  227. [ 2152.994391] xhci_hcd 0000:03:00.3: Timeout while waiting for setup device command
  228. [ 2153.202361] usb 2-2: device not accepting address 22, error -62
  229. [ 2153.395548] usb 2-2: Device not responding to setup address.
  230. [ 2153.610550] usb 2-2: Device not responding to setup address.
  231. [ 2153.818419] usb 2-2: device not accepting address 22, error -71
  232. [ 2154.012538] usb 2-2: Device not responding to setup address.
  233. [ 2154.226618] usb 2-2: Device not responding to setup address.
  234. [ 2154.434373] usb 2-2: device not accepting address 22, error -71
  235. [ 2154.450385] scsi host3: uas_eh_device_reset_handler FAILED err -19
  236. [ 2154.450397] sd 3:0:0:0: Device offlined - not ready after error recovery
  237. [ 2154.450417] sd 3:0:0:0: Device offlined - not ready after error recovery
  238. [ 2154.450426] sd 3:0:0:0: [sda] tag#13 FAILED Result: hostbyte=DID_TIME_OUT driverbyte=DRIVER_OK cmd_age=54s
  239. [ 2154.450429] sd 3:0:0:0: [sda] tag#13 CDB: Read(10) 28 00 00 00 00 08 00 00 01 00
  240. [ 2154.450430] I/O error, dev sda, sector 8 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
  241. [ 2154.450437] Buffer I/O error on dev sda, logical block 8, async page read
  242. [ 2154.450446] sd 3:0:0:0: [sda] tag#14 FAILED Result: hostbyte=DID_TIME_OUT driverbyte=DRIVER_OK cmd_age=54s
  243. [ 2154.450447] sd 3:0:0:0: [sda] tag#14 CDB: Read(10) 28 00 00 00 00 09 00 00 07 00
  244. [ 2154.450448] I/O error, dev sda, sector 9 op 0x0:(READ) flags 0x0 phys_seg 7 prio class 0
  245. [ 2154.450450] Buffer I/O error on dev sda, logical block 9, async page read
  246. [ 2154.450451] Buffer I/O error on dev sda, logical block 10, async page read
  247. [ 2154.450452] Buffer I/O error on dev sda, logical block 11, async page read
  248. [ 2154.450453] Buffer I/O error on dev sda, logical block 12, async page read
  249. [ 2154.450454] Buffer I/O error on dev sda, logical block 13, async page read
  250. [ 2154.450456] Buffer I/O error on dev sda, logical block 14, async page read
  251. [ 2154.450457] Buffer I/O error on dev sda, logical block 15, async page read
  252. [ 2154.450470] usb 2-2: USB disconnect, device number 22
  253. [ 2154.450998] Dev sda: unable to read RDB block 8
  254. [ 2154.451045] device offline error, dev sda, sector 24 op 0x0:(READ) flags 0x0 phys_seg 8 prio class 0
  255. [ 2154.451048] Buffer I/O error on dev sda, logical block 24, async page read
  256. [ 2154.451050] Buffer I/O error on dev sda, logical block 25, async page read
  257. [ 2154.451059]  sda: unable to read partition table
  258. [ 2154.451113] sd 3:0:0:0: [sda] Attached SCSI disk
  259. [ 2154.472413] sd 3:0:0:0: [sda] Synchronizing SCSI cache
  260. [ 2154.602381] sd 3:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
  261. [ 2154.796557] usb 2-2: Device not responding to setup address.
  262. [ 2155.010502] usb 2-2: Device not responding to setup address.
  263. [ 2155.218358] usb 2-2: device not accepting address 23, error -71
  264. [ 2155.410516] usb 2-2: Device not responding to setup address.
  265. [ 2155.627571] usb 2-2: Device not responding to setup address.
  266. [ 2155.834362] usb 2-2: device not accepting address 24, error -71
  267. [ 2155.842651] usb usb2-port2: attempt power cycle
  268. [ 2156.751561] usb 2-2: Device not responding to setup address.
  269. [ 2156.962532] usb 2-2: Device not responding to setup address.
  270. [ 2157.170360] usb 2-2: device not accepting address 25, error -71
  271. [ 2157.364823] usb 2-2: Device not responding to setup address.
  272. [ 2157.578496] usb 2-2: Device not responding to setup address.
  273. [ 2157.786351] usb 2-2: device not accepting address 26, error -71
  274. [ 2157.794656] usb usb2-port2: unable to enumerate USB device
  275.  

Quellcode

Hier kannst du den Code kopieren und ihn in deinen bevorzugten Editor einfügen. PASTEBIN_DOWNLOAD_SNIPPET_EXPLAIN

Verlinken

URL: alles markieren
https://nopaste.debianforum.de/42214

BBCode: alles markieren
[NP]42214[/NP]

LATEST_SNIPPETS