Woody mit Kernel 2.4.18 -> Ethernet Karte geht nicht mehr

[HellHound]

Hallo!
Ich hab' das folgende Probleme:
Unter dem Standardkernel (2.2.20-idepci) funktioniert meine Ethernet Karte
(Unex; Realtek 8139 kompatibel) einwandfrei (LAN und DSL).

Nun wollte ich den Kernel wechseln und habe mir über apt-get das
Kernel-Image 2.4.18-k7 besorgt. Das Problem ist, dass ich
mit diesem Kernel meine Ethernet Karte nicht zum Laufen bringe. Über
"modprobe 3819too" lade ich das Modul; das Chaos geht in dem Moment los, in
dem ich ein Kabel in die Karte einstecke (sowohl LAN als auch DSL). Dann
erhalte ich die folgenden 2 Meldungen:
NETDEV WATCHDOG: eth0: transmited time out.
eth0: Setting half-duplex based on auto-negotiated partner ability 0000.

Die Karte funktioniert in dem Fall überhaupt nicht mehr (weder LAN noch
DSL).

Die Ironie ist, dass die gleiche Karte mit Red Hat 7.3 und Kernel 2.4.18 einwandfrei läuft.

Danke für die Hilfe,
HellHound

PS: Gleiche Frage wurde von nem Freund in der Deutschen User Mailinglist gestellt. Leider ohne Erfolg

[notms]

Unter dem Standardkernel (2.2.20-idepci) funktioniert meine Ethernet Karte
(Unex; Realtek 8139 kompatibel) einwandfrei (LAN und DSL).

Nun wollte ich den Kernel wechseln und habe mir über apt-get das
Kernel-Image 2.4.18-k7 besorgt. Das Problem ist, dass ich
mit diesem Kernel meine Ethernet Karte nicht zum Laufen bringe. Über
"modprobe 3819too" lade ich das Modul;

Du meinst sicher 8139too ?

NETDEV WATCHDOG: eth0: transmited time out.
eth0: Setting half-duplex based on auto-negotiated partner ability 0000.

Hast Du mal versucht, den Kernel neu zu kompilieren ? Bei Problemen hilfts auch oft sehr, die Unterstützung direkt in den Kernel zu kompilieren.
Ansonsten solltest Du vielleicht mal die Parameter des Moduls (address,irq,...) anpassen.
Die UNEX NexNIC ND012C läuft jedenfalls mit 2.4.x und wurde auch vom Entwickler des Moduls selbst getestet. Für genauere Infos schau mal in den Kernelquellen unter Documentation/networking/8139too.txt
Wenns nicht funktioniert, sollten auch noch mehr Fehlermeldungen vorhanden sein, z.B. beim Laden des Moduls.

[glatzor]

Das Problem mit dem RealTek-Treiber ist, dass die Spezifikationen der Karte nicht freigegeben und sehr viele Funktionen nich dokumentiert sind. Darum hat der RealTek-Treiber generell sehr viele Fehler.
Wahrscheinlich hat RedHat ihren Kernel mit einem neueren Treiber gepatcht.

Du kannst einfach mal den Kernel von Redhat auf Dein Debian rüberkopieren.

Oder ihn aus den RedHat-Kernel-Sourcen neu kompilieren.

[HellHound]

Ich hab mir jetzt ne andre Karte besorgt, die 100%ig NE 2000 kompatibel ist. Natürlich die PCI Version. (Ja, ich weiß dass NE2K eigentlich ein Witz ist, aber hab damit die besten Erfahrungen gemacht.)

Nun ergibt sich ein neues Problem. Die Karte kann ich perfekt hochfahren, etc. Auch das Problem mit dem Kabel (s.o.) habe ich nicht mehr.

Sobald ich jedoch pppoeconf ausführe, oder einen anderen Rechner im LAN anpinge, erhalte ich wieder die folgende Meldung:
NETDEV WATCHDOG: eth0: transmit timed out

Im Syslog erhalte ich Meldung "Resetting the 8390". Außerdem steht die obige Meldung dort wie folgt: NETDEV WATCHDOG: eth0: transmit timed out. Lost the interrupt?
(Kann leider nicht die exakten Meldungen wiedergeben, da ich momentan am Windoze Rechner bin und keinen Zugriff auf das Syslog vom betroffenen Rechner habe.)

Der Installationskernel war compact, anschließendes Update auf kernel-image-2.4.18-k7

Hat jemand ne Idee?

[HellHound]

So, hier jetzt Syslog & dmesg:

Syslog

Jul 17 15:11:18 erde kernel: klogd 1.4.1#10, log source = /proc/kmsg started.
Jul 17 15:11:18 erde kernel: Inspecting /boot/System.map-2.4.18-k7
Jul 17 15:11:19 erde rpc.statd[166]: Version 1.0 Starting
Jul 17 15:11:19 erde kernel: Loaded 14127 symbols from /boot/System.map-2.4.18-k7.
Jul 17 15:11:19 erde kernel: Symbols match kernel version 2.4.18.
Jul 17 15:11:19 erde kernel: Loaded 162 symbols from 9 modules.
Jul 17 15:11:19 erde kernel: Linux version 2.4.18-k7 (herbert@gondolin) (gcc version 2.95.4 20011002 (Debian prerelease)) #1 Sun Apr 14 13:19:11 EST 2002
Jul 17 15:11:19 erde kernel: BIOS-provided physical RAM map:
Jul 17 15:11:19 erde kernel: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Jul 17 15:11:19 erde kernel: BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
Jul 17 15:11:19 erde kernel: BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Jul 17 15:11:19 erde kernel: BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
Jul 17 15:11:19 erde kernel: BIOS-e820: 000000000fff0000 - 000000000fff3000 (ACPI NVS)
Jul 17 15:11:19 erde kernel: BIOS-e820: 000000000fff3000 - 0000000010000000 (ACPI data)
Jul 17 15:11:19 erde kernel: BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
Jul 17 15:11:19 erde kernel: BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
Jul 17 15:11:19 erde kernel: BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
Jul 17 15:11:19 erde kernel: found SMP MP-table at 000f62d0
Jul 17 15:11:19 erde kernel: hm, page 000f6000 reserved twice.
Jul 17 15:11:19 erde kernel: hm, page 000f7000 reserved twice.
Jul 17 15:11:19 erde kernel: hm, page 000f1000 reserved twice.
Jul 17 15:11:19 erde kernel: hm, page 000f2000 reserved twice.
Jul 17 15:11:19 erde kernel: On node 0 totalpages: 65520
Jul 17 15:11:19 erde kernel: zone(0): 4096 pages.
Jul 17 15:11:19 erde kernel: zone(1): 61424 pages.
Jul 17 15:11:19 erde kernel: zone(2): 0 pages.
Jul 17 15:11:19 erde kernel: Intel MultiProcessor Specification v1.1
Jul 17 15:11:19 erde kernel: Virtual Wire compatibility mode.
Jul 17 15:11:19 erde kernel: OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000
Jul 17 15:11:19 erde kernel: Processor #0 Pentium(tm) Pro APIC version 17
Jul 17 15:11:19 erde kernel: I/O APIC #2 Version 17 at 0xFEC00000.
Jul 17 15:11:19 erde kernel: Processors: 1
Jul 17 15:11:19 erde kernel: Kernel command line: BOOT_IMAGE=Linux ro root=302
Jul 17 15:11:19 erde kernel: Initializing CPU#0
Jul 17 15:11:19 erde kernel: Detected 1593.242 MHz processor.
Jul 17 15:11:19 erde kernel: Console: colour VGA+ 80x25
Jul 17 15:11:19 erde kernel: Calibrating delay loop... 3178.49 BogoMIPS
Jul 17 15:11:19 erde kernel: Memory: 253320k/262080k available (847k kernel code, 8372k reserved, 236k data, 212k init, 0k highmem)
Jul 17 15:11:19 erde kernel: Dentry-cache hash table entries: 32768 (order: 6, 262144 bytes)
Jul 17 15:11:19 erde kernel: Inode-cache hash table entries: 16384 (order: 5, 131072 bytes)
Jul 17 15:11:19 erde kernel: Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
Jul 17 15:11:19 erde kernel: Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes)
Jul 17 15:11:19 erde kernel: Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
Jul 17 15:11:19 erde kernel: CPU: Before vendor init, caps: 0383fbff c1cbfbff 00000000, vendor = 2
Jul 17 15:11:19 erde kernel: CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
Jul 17 15:11:19 erde kernel: CPU: L2 Cache: 256K (64 bytes/line)
Jul 17 15:11:19 erde kernel: CPU: After vendor init, caps: 0383fbff c1cbfbff 00000000 00000000
Jul 17 15:11:19 erde kernel: Intel machine check architecture supported.
Jul 17 15:11:19 erde kernel: Intel machine check reporting enabled on CPU#0.
Jul 17 15:11:19 erde kernel: CPU: After generic, caps: 0383fbff c1cbfbff 00000000 00000000
Jul 17 15:11:19 erde kernel: CPU: Common caps: 0383fbff c1cbfbff 00000000 00000000
Jul 17 15:11:19 erde kernel: CPU: AMD Athlon(tm) XP 1900+ stepping 02
Jul 17 15:11:19 erde kernel: Enabling fast FPU save and restore... done.
Jul 17 15:11:19 erde kernel: Enabling unmasked SIMD FPU exception support... done.
Jul 17 15:11:19 erde kernel: Checking 'hlt' instruction... OK.
Jul 17 15:11:19 erde kernel: POSIX conformance testing by UNIFIX
Jul 17 15:11:19 erde kernel: enabled ExtINT on CPU#0
Jul 17 15:11:19 erde kernel: ESR value before enabling vector: 00000000
Jul 17 15:11:19 erde kernel: ESR value after enabling vector: 00000000
Jul 17 15:11:19 erde kernel: ENABLING IO-APIC IRQs
Jul 17 15:11:19 erde kernel: Setting 2 in the phys_id_present_map
Jul 17 15:11:19 erde kernel: ...changing IO-APIC physical APIC ID to 2 ... ok.
Jul 17 15:11:19 erde kernel: init IO_APIC IRQs
Jul 17 15:11:19 erde kernel: IO-APIC (apicid-pin) 2-0, 2-5, 2-9, 2-11, 2-17, 2-18, 2-20, 2-21, 2-22 not connected.
Jul 17 15:11:19 erde kernel: ..TIMER: vector=0x31 pin1=2 pin2=0
Jul 17 15:11:19 erde kernel: number of MP IRQ sources: 16.
Jul 17 15:11:19 erde kernel: number of IO-APIC #2 registers: 24.
Jul 17 15:11:19 erde kernel: testing the IO APIC.......................
Jul 17 15:11:19 erde kernel:
Jul 17 15:11:19 erde kernel: IO APIC #2......
Jul 17 15:11:19 erde kernel: .... register #00: 02000000
Jul 17 15:11:19 erde kernel: ....... : physical APIC id: 02
Jul 17 15:11:19 erde kernel: .... register #01: 00178000
Jul 17 15:11:19 erde kernel: ....... : max redirection entries: 0017
Jul 17 15:11:19 erde kernel: ....... : PRQ implemented: 1
Jul 17 15:11:19 erde kernel: ....... : IO APIC version: 0000
Jul 17 15:11:19 erde kernel: WARNING: unexpected IO-APIC, please mail
Jul 17 15:11:19 erde kernel: to linux-smp@vger.kernel.org
Jul 17 15:11:19 erde kernel: .... IRQ redirection table:
Jul 17 15:11:19 erde kernel: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
Jul 17 15:11:19 erde kernel: 00 000 00 1 0 0 0 0 0 0 00
Jul 17 15:11:19 erde kernel: 01 001 01 0 0 0 0 0 1 1 39
Jul 17 15:11:19 erde kernel: 02 001 01 0 0 0 0 0 1 1 31
Jul 17 15:11:19 erde kernel: 03 001 01 0 0 0 0 0 1 1 41
Jul 17 15:11:19 erde kernel: 04 001 01 0 0 0 0 0 1 1 49
Jul 17 15:11:19 erde kernel: 05 000 00 1 0 0 0 0 0 0 00
Jul 17 15:11:19 erde kernel: 06 001 01 0 0 0 0 0 1 1 51
Jul 17 15:11:19 erde kernel: 07 001 01 0 0 0 0 0 1 1 59
Jul 17 15:11:19 erde kernel: 08 001 01 0 0 0 0 0 1 1 61
Jul 17 15:11:19 erde kernel: 09 000 00 1 0 0 0 0 0 0 00
Jul 17 15:11:19 erde kernel: 0a 001 01 0 0 0 0 0 1 1 69
Jul 17 15:11:19 erde kernel: 0b 000 00 1 0 0 0 0 0 0 00
Jul 17 15:11:19 erde kernel: 0c 001 01 0 0 0 0 0 1 1 71
Jul 17 15:11:19 erde kernel: 0d 001 01 0 0 0 0 0 1 1 79
Jul 17 15:11:19 erde kernel: 0e 001 01 0 0 0 0 0 1 1 81
Jul 17 15:11:19 erde kernel: 0f 001 01 0 0 0 0 0 1 1 89
Jul 17 15:11:19 erde kernel: 10 001 01 1 1 0 1 0 1 1 91
Jul 17 15:11:19 erde kernel: 11 000 00 1 0 0 0 0 0 0 00
Jul 17 15:11:19 erde kernel: 12 000 00 1 0 0 0 0 0 0 00
Jul 17 15:11:19 erde kernel: 13 001 01 1 1 0 1 0 1 1 99
Jul 17 15:11:19 erde kernel: 14 000 00 1 0 0 0 0 0 0 00
Jul 17 15:11:19 erde kernel: 15 000 00 1 0 0 0 0 0 0 00
Jul 17 15:11:19 erde kernel: 16 000 00 1 0 0 0 0 0 0 00
Jul 17 15:11:19 erde kernel: 17 001 01 1 1 0 1 0 1 1 A1
Jul 17 15:11:19 erde kernel: IRQ to pin mappings:
Jul 17 15:11:19 erde kernel: IRQ0 -> 0:2
Jul 17 15:11:19 erde kernel: IRQ1 -> 0:1
Jul 17 15:11:19 erde kernel: IRQ3 -> 0:3
Jul 17 15:11:19 erde kernel: IRQ4 -> 0:4
Jul 17 15:11:19 erde kernel: IRQ5 -> 0:19
Jul 17 15:11:19 erde kernel: IRQ6 -> 0:6
Jul 17 15:11:19 erde kernel: IRQ7 -> 0:7
Jul 17 15:11:19 erde kernel: IRQ8 -> 0:8
Jul 17 15:11:19 erde kernel: IRQ9 -> 0:23
Jul 17 15:11:19 erde kernel: IRQ10 -> 0:10
Jul 17 15:11:19 erde kernel: IRQ11 -> 0:16
Jul 17 15:11:19 erde kernel: IRQ12 -> 0:12
Jul 17 15:11:19 erde kernel: IRQ13 -> 0:13
Jul 17 15:11:19 erde kernel: IRQ14 -> 0:14
Jul 17 15:11:19 erde kernel: IRQ15 -> 0:15
Jul 17 15:11:19 erde kernel: .................................... done.
Jul 17 15:11:19 erde kernel: Using local APIC timer interrupts.
Jul 17 15:11:19 erde kernel: calibrating APIC timer ...
Jul 17 15:11:19 erde kernel: ..... CPU clock speed is 1593.2918 MHz.
Jul 17 15:11:19 erde kernel: ..... host bus clock speed is 265.5486 MHz.
Jul 17 15:11:19 erde kernel: cpu: 0, clocks: 2655486, slice: 1327743
Jul 17 15:11:19 erde kernel: CPU0<T0:2655472,T1:1327728,D:1,S:1327743,C:2655486>
Jul 17 15:11:19 erde kernel: mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
Jul 17 15:11:19 erde kernel: mtrr: detected mtrr type: Intel
Jul 17 15:11:19 erde kernel: PCI: PCI BIOS revision 2.10 entry at 0xfb3e0, last bus=1
Jul 17 15:11:19 erde kernel: PCI: Using configuration type 1
Jul 17 15:11:19 erde kernel: PCI: Probing PCI hardware
Jul 17 15:11:19 erde kernel: Unknown bridge resource 0: assuming transparent
Jul 17 15:11:19 erde kernel: PCI: Using IRQ router SIS [1039/0008] at 00:02.0
Jul 17 15:11:19 erde kernel: Linux NET4.0 for Linux 2.4
Jul 17 15:11:19 erde kernel: Based upon Swansea University Computer Society NET3.039
Jul 17 15:11:19 erde kernel: Initializing RT netlink socket
Jul 17 15:11:19 erde kernel: Starting kswapd
Jul 17 15:11:19 erde kernel: VFS: Diskquotas version dquot_6.4.0 initialized
Jul 17 15:11:19 erde kernel: devfs: v1.10 (20020120) Richard Gooch (rgooch@atnf.csiro.au)
Jul 17 15:11:19 erde kernel: devfs: boot_options: 0x0
Jul 17 15:11:19 erde kernel: pty: 256 Unix98 ptys configured
Jul 17 15:11:19 erde kernel: Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled
Jul 17 15:11:19 erde kernel: ttyS00 at 0x03f8 (irq = 4) is a 16550A
Jul 17 15:11:19 erde kernel: ttyS01 at 0x02f8 (irq = 3) is a 16550A
Jul 17 15:11:19 erde kernel: block: 128 slots per queue, batch=32
Jul 17 15:11:19 erde kernel: RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Jul 17 15:11:19 erde kernel: Cronyx Ltd, Synchronous PPP and CISCO HDLC (c) 1994
Jul 17 15:11:19 erde kernel: Linux port (c) 1998 Building Number Three Ltd & Jan "Yenya" Kasprzak.
Jul 17 15:11:19 erde kernel: NET4: Linux TCP/IP 1.0 for NET4.0
Jul 17 15:11:19 erde kernel: IP Protocols: ICMP, UDP, TCP, IGMP
Jul 17 15:11:19 erde kernel: IP: routing cache hash table of 2048 buckets, 16Kbytes
Jul 17 15:11:19 erde kernel: TCP: Hash tables configured (established 16384 bind 16384)
Jul 17 15:11:19 erde kernel: Linux IP multicast router 0.06 plus PIM-SM
Jul 17 15:11:19 erde kernel: RAMDISK: cramfs filesystem found at block 0
Jul 17 15:11:19 erde kernel: RAMDISK: Loading 2700 blocks [1 disk] into ram disk... |^H/^H-^H^H|^H/^H-^H^H|^H/^H-^H^H|^H/^H-^H^H|^H/^H-^H^H|^H/^H-^H^H|^H/^H-^H^H|^H/^H-^H^H|^H/^H-^H^H|^H/^H-^H^H|^H/^H-^H^H|^H/^H-^H^H|^H/^H-^H^H|^H/^H-^H^H|^H/^H-^H^H|^H/^H-^H^H|^H/^H-^H^H|^H/^H-^H^H|^H/^H-^H^H|^H/^H-^H^H|^H/^H-^H^H|^H/^H-^H^H|^H/^H-^H^H|^H/^H-^H^H|^H/^H-^H^H|^H/^H-^H^H|^H/^H-^H^H|^H/^H-^H^H|^H/^H-^H^H|^H/^H-^H^H|^H/^H-^H^H|^H/^H-^H^H|^H/^H-^H^H|^H/^H-^H^H|^H/^H-^H^H|^H/^H-^H^H|^H/^H-^H^H|^H/^H-^H^H|^H/^H-^H^H|^H/^H-^H^H|^H/^H-^H^H|^H/^H-^H^H|^Hdone.
Jul 17 15:11:19 erde kernel: Freeing initrd memory: 2700k freed
Jul 17 15:11:19 erde kernel: VFS: Mounted root (cramfs filesystem).
Jul 17 15:11:19 erde kernel: Journalled Block Device driver loaded
Jul 17 15:11:19 erde kernel: Uniform Multi-Platform E-IDE driver Revision: 6.31
Jul 17 15:11:19 erde kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Jul 17 15:11:19 erde kernel: SIS5513: IDE controller on PCI bus 00 dev 15
Jul 17 15:11:19 erde kernel: SIS5513: chipset revision 208
Jul 17 15:11:19 erde kernel: SIS5513: not 100%% native mode: will probe irqs later
Jul 17 15:11:19 erde kernel: SiS745
Jul 17 15:11:19 erde kernel: ide0: BM-DMA at 0x4000-0x4007, BIOS settings: hda:DMA, hdb:pio
Jul 17 15:11:19 erde kernel: ide1: BM-DMA at 0x4008-0x400f, BIOS settings: hdc:DMA, hdd:DMA
Jul 17 15:11:19 erde kernel: hda: Maxtor 92040U6, ATA DISK drive
Jul 17 15:11:19 erde kernel: hdc: LITE-ON LTR-0841, ATAPI CD/DVD-ROM drive
Jul 17 15:11:19 erde kernel: hdd: ATAPI CDROM 52X, ATAPI CD/DVD-ROM drive
Jul 17 15:11:19 erde kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Jul 17 15:11:19 erde kernel: ide1 at 0x170-0x177,0x376 on irq 15
Jul 17 15:11:19 erde kernel: hda: 39882528 sectors (20420 MB) w/2048KiB Cache, CHS=39566/16/63, UDMA(66)
Jul 17 15:11:19 erde kernel: Partition check:
Jul 17 15:11:19 erde kernel: /dev/ide/host0/bus0/target0/lun0: [PTBL] [2482/255/63] p1 p2 p3
Jul 17 15:11:19 erde kernel: cramfs: wrong magic
Jul 17 15:11:19 erde kernel: VFS: Mounted root (ext2 filesystem) readonly.
Jul 17 15:11:19 erde kernel: change_root: old root has d_count=2
Jul 17 15:11:19 erde kernel: Freeing unused kernel memory: 212k freed
Jul 17 15:11:19 erde kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Jul 17 15:11:19 erde kernel: Adding Swap: 514072k swap-space (priority -1)
Jul 17 15:11:19 erde kernel: Real Time Clock Driver v1.10e
Jul 17 15:11:19 erde lpd[178]: restarted
Jul 17 15:11:19 erde /usr/sbin/cron[190]: (CRON) INFO (pidfile fd = 3)
Jul 17 15:11:19 erde /usr/sbin/cron[191]: (CRON) STARTUP (fork ok)
Jul 17 15:11:19 erde /usr/sbin/cron[191]: (CRON) INFO (Running @reboot jobs)
Jul 17 15:11:29 erde kernel: ne2k-pci.c:v1.02 10/19/2000 D. Becker/P. Gortmaker
Jul 17 15:11:29 erde kernel: http://www.scyld.com/network/ne2k-pci.html
Jul 17 15:11:29 erde kernel: eth0: RealTek RTL-8029 found at 0xe400, IRQ 11, 00:40:F4:36:8B:56.
Jul 17 15:11:44 erde kernel: NETDEV WATCHDOG: eth0: transmit timed out
Jul 17 15:11:44 erde kernel: eth0: Tx timed out, lost interrupt? TSR=0x3, ISR=0x3, t=520.
Jul 17 15:11:54 erde pppoe[220]: Timeout waiting for PADO packets
Jul 17 15:12:37 erde kernel: ne2k-pci.c:v1.02 10/19/2000 D. Becker/P. Gortmaker
Jul 17 15:12:37 erde kernel: http://www.scyld.com/network/ne2k-pci.html
Jul 17 15:12:37 erde kernel: eth0: RealTek RTL-8029 found at 0xe400, IRQ 11, 00:40:F4:36:8B:56.
Jul 17 15:12:54 erde kernel: NETDEV WATCHDOG: eth0: transmit timed out
Jul 17 15:12:54 erde kernel: eth0: Tx timed out, lost interrupt? TSR=0x3, ISR=0x3, t=520.
Jul 17 15:13:04 erde pppoe[284]: Timeout waiting for PADO packets

Das doppelte Laden von ne2k-pci war Absicht. Hab beim zweiten Mal mit der Option debug=31 gestartet.

dmesg

Linux version 2.4.18-k7 (herbert@gondolin) (gcc version 2.95.4 20011002 (Debian prerelease)) #1 Sun Apr 14 13:19:11 EST 2002
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
BIOS-e820: 000000000fff0000 - 000000000fff3000 (ACPI NVS)
BIOS-e820: 000000000fff3000 - 0000000010000000 (ACPI data)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
found SMP MP-table at 000f62d0
hm, page 000f6000 reserved twice.
hm, page 000f7000 reserved twice.
hm, page 000f1000 reserved twice.
hm, page 000f2000 reserved twice.
On node 0 totalpages: 65520
zone(0): 4096 pages.
zone(1): 61424 pages.
zone(2): 0 pages.
Intel MultiProcessor Specification v1.1
Virtual Wire compatibility mode.
OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000
Processor #0 Pentium(tm) Pro APIC version 17
I/O APIC #2 Version 17 at 0xFEC00000.
Processors: 1
Kernel command line: BOOT_IMAGE=Linux ro root=302
Initializing CPU#0
Detected 1593.242 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 3178.49 BogoMIPS
Memory: 253320k/262080k available (847k kernel code, 8372k reserved, 236k data, 212k init, 0k highmem)
Dentry-cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
CPU: Before vendor init, caps: 0383fbff c1cbfbff 00000000, vendor = 2
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After vendor init, caps: 0383fbff c1cbfbff 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0383fbff c1cbfbff 00000000 00000000
CPU: Common caps: 0383fbff c1cbfbff 00000000 00000000
CPU: AMD Athlon(tm) XP 1900+ stepping 02
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
ENABLING IO-APIC IRQs
Setting 2 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 2 ... ok.
init IO_APIC IRQs
IO-APIC (apicid-pin) 2-0, 2-5, 2-9, 2-11, 2-17, 2-18, 2-20, 2-21, 2-22 not connected.
..TIMER: vector=0x31 pin1=2 pin2=0
number of MP IRQ sources: 16.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................

IO APIC #2......
.... register #00: 02000000
....... : physical APIC id: 02
.... register #01: 00178000
....... : max redirection entries: 0017
....... : PRQ implemented: 1
....... : IO APIC version: 0000
WARNING: unexpected IO-APIC, please mail
to linux-smp@vger.kernel.org
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 001 01 0 0 0 0 0 1 1 39
02 001 01 0 0 0 0 0 1 1 31
03 001 01 0 0 0 0 0 1 1 41
04 001 01 0 0 0 0 0 1 1 49
05 000 00 1 0 0 0 0 0 0 00
06 001 01 0 0 0 0 0 1 1 51
07 001 01 0 0 0 0 0 1 1 59
08 001 01 0 0 0 0 0 1 1 61
09 000 00 1 0 0 0 0 0 0 00
0a 001 01 0 0 0 0 0 1 1 69
0b 000 00 1 0 0 0 0 0 0 00
0c 001 01 0 0 0 0 0 1 1 71
0d 001 01 0 0 0 0 0 1 1 79
0e 001 01 0 0 0 0 0 1 1 81
0f 001 01 0 0 0 0 0 1 1 89
10 001 01 1 1 0 1 0 1 1 91
11 000 00 1 0 0 0 0 0 0 00
12 000 00 1 0 0 0 0 0 0 00
13 001 01 1 1 0 1 0 1 1 99
14 000 00 1 0 0 0 0 0 0 00
15 000 00 1 0 0 0 0 0 0 00
16 000 00 1 0 0 0 0 0 0 00
17 001 01 1 1 0 1 0 1 1 A1
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:19
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:23
IRQ10 -> 0:10
IRQ11 -> 0:16
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1593.2918 MHz.
..... host bus clock speed is 265.5486 MHz.
cpu: 0, clocks: 2655486, slice: 1327743
CPU0<T0:2655472,T1:1327728,D:1,S:1327743,C:2655486>
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfb3e0, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
Unknown bridge resource 0: assuming transparent
PCI: Using IRQ router SIS [1039/0008] at 00:02.0
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Diskquotas version dquot_6.4.0 initialized
devfs: v1.10 (20020120) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
block: 128 slots per queue, batch=32
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Cronyx Ltd, Synchronous PPP and CISCO HDLC (c) 1994
Linux port (c) 1998 Building Number Three Ltd & Jan "Yenya" Kasprzak.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 16384)
Linux IP multicast router 0.06 plus PIM-SM
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 2700 blocks [1 disk] into ram disk... |/-|/-|/-|/-|/-|/-|/-|/-|/-|/-|/-|/-|/-|/-|/-|/-|/-|/-|/-|/-|/-|/-|/-|/-|/-|/-|/-|/-|/-|/-|/-|/-|/-|/-|/-|/-|/-|/-|/-|/-|/-|/-|done.
Freeing initrd memory: 2700k freed
VFS: Mounted root (cramfs filesystem).
Journalled Block Device driver loaded
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SIS5513: IDE controller on PCI bus 00 dev 15
SIS5513: chipset revision 208
SIS5513: not 100% native mode: will probe irqs later
SiS745
ide0: BM-DMA at 0x4000-0x4007, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x4008-0x400f, BIOS settings: hdc:DMA, hdd:DMA
hda: Maxtor 92040U6, ATA DISK drive
hdc: LITE-ON LTR-0841, ATAPI CD/DVD-ROM drive
hdd: ATAPI CDROM 52X, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 39882528 sectors (20420 MB) w/2048KiB Cache, CHS=39566/16/63, UDMA(66)
Partition check:
/dev/ide/host0/bus0/target0/lun0: [PTBL] [2482/255/63] p1 p2 p3
cramfs: wrong magic
VFS: Mounted root (ext2 filesystem) readonly.
change_root: old root has d_count=2
Freeing unused kernel memory: 212k freed
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Adding Swap: 514072k swap-space (priority -1)
Real Time Clock Driver v1.10e