seit irgend einem update (weiß nicht mehr welches) wird der Bootvorgang verzögert: "A start job ist running for /mnt/nas/Public" und noch zwei weitere Freigaben.
Heute dachte ich, gehe das nervige Problem mal an, und fand heraus (WWW und hier im Forum), daß eine Menge Leute damit Probleme haben/hatten und zwar
mit unterschiedlichen Geräten/Diensten, und daß grundsätzlich systemd die Schuld zugewiesen werden kann.
Die Lösungsansätze, die ich fand, sind bei mir jedoch nicht zielführend (betreffen USB-Festplatten, sendmail, geänderte UUID's und ähnliches).
Also Butter bei die Fische: Ich verwende Debian Jessie (getreulich aktuell gehalten)
Die fstab sieht so aus:
Code: Alles auswählen
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sdb5 during installation
UUID=0c99f502-9845-42aa-94b4-098eb56a6ac3 / ext4 errors=remount-ro 0 1
# /boot was on /dev/sdb1 during installation
UUID=437f3ba8-2a27-4448-9d95-d4a442f004c5 /boot ext2 defaults 0 2
# /home was on /dev/sdb7 during installation
UUID=76ed7451-0e50-4c4b-8b45-74270241e398 /home ext4 defaults 0 2
# /usr was on /dev/sdb6 during installation
UUID=c2a012c7-3917-49a5-b341-b517b2a0517f /usr ext4 defaults 0 2
# swap was on /dev/sdb8 during installation
/dev/sdb8 none swap sw 0 0
/dev/sr0 /media/cdrom0 udf,iso9660 user,noauto 0 0
192.168.0.3:/Public /mnt/nas/Public nfs rw 0 0
192.168.0.3:/Multimedia /mnt/nas/Multimedia nfs rw 0 0
192.168.0.3:/Backup /mnt/nas/Backup nfs rw 0 0
Code: Alles auswählen
[ 18.746309] Key type id_resolver registered
[ 18.746310] Key type id_legacy registered
[ 18.963942] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 108.655440] systemd-journald[248]: Received request to flush runtime journal from PID 1
[ 112.590822] r8169 0000:02:00.0: firmware: direct-loading firmware rtl_nic/rtl8168d-1.fw
[ 112.652263] r8169 0000:02:00.0 eth0: link down
[ 112.652277] r8169 0000:02:00.0 eth0: link down
[ 115.271299] r8169 0000:02:00.0 eth0: link up
Das Netzwerk wird vom network-manager gesteuert, daher sieht die /etc/network/interfaces so aus:
Code: Alles auswählen
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
source /etc/network/interfaces.d/*
# The loopback network interface
auto lo
iface lo inet loopback
/etc/network/interfaces (END)
Weiß jemand Rat?