hab mir die Tage nen neuen Rechner zusammengebaut und läuft auch alles so wie gewollt
Intel® Core i5-7600K, Prozessor
ASRock Z270 Extreme4, Mainboard
be quiet! POWER ZONE 650W, PC-Netzteil
1.lm_sensors und i2c-tools installiert
2. sensors-detect als root ausgeführt und alle Fragen mit yes beantwortet
Code: Alles auswählen
# sensors
amdgpu-pci-0100
Adapter: PCI adapter
fan1: 696 RPM
temp1: +29.0°C (crit = +0.0°C, hyst = +0.0°C)
coretemp-isa-0000
Adapter: ISA adapter
Package id 0: +29.0°C (high = +80.0°C, crit = +100.0°C)
Core 0: +26.0°C (high = +80.0°C, crit = +100.0°C)
Core 1: +28.0°C (high = +80.0°C, crit = +100.0°C)
Core 2: +29.0°C (high = +80.0°C, crit = +100.0°C)
Core 3: +28.0°C (high = +80.0°C, crit = +100.0°C)
nct6791-isa-0290
Adapter: ISA adapter
Vcore: +0.42 V (min = +0.00 V, max = +1.74 V)
in1: +1.70 V (min = +0.00 V, max = +0.00 V) ALARM
AVCC: +3.36 V (min = +2.98 V, max = +3.63 V)
+3.3V: +3.34 V (min = +2.98 V, max = +3.63 V)
in4: +1.02 V (min = +0.00 V, max = +0.00 V) ALARM
in5: +1.02 V (min = +0.00 V, max = +0.00 V) ALARM
in6: +1.00 V (min = +0.00 V, max = +0.00 V) ALARM
3VSB: +3.49 V (min = +2.98 V, max = +3.63 V)
Vbat: +3.17 V (min = +2.70 V, max = +3.63 V)
in9: +1.02 V (min = +0.00 V, max = +0.00 V) ALARM
in10: +0.22 V (min = +0.00 V, max = +0.00 V) ALARM
in11: +0.97 V (min = +0.00 V, max = +0.00 V) ALARM
in12: +1.22 V (min = +0.00 V, max = +0.00 V) ALARM
in13: +1.27 V (min = +0.00 V, max = +0.00 V) ALARM
in14: +1.07 V (min = +0.00 V, max = +0.00 V) ALARM
fan1: 0 RPM (min = 0 RPM)
fan2: 1609 RPM (min = 0 RPM)
fan3: 4299 RPM (min = 0 RPM)
fan4: 0 RPM (min = 0 RPM)
fan5: 0 RPM (min = 0 RPM)
SYSTIN: +28.0°C (high = +0.0°C, hyst = +0.0°C) ALARM sensor = thermistor
CPUTIN: +26.0°C (high = +80.0°C, hyst = +75.0°C) sensor = thermistor
AUXTIN0: +26.0°C sensor = thermistor
AUXTIN1: +105.0°C sensor = thermistor
AUXTIN2: +28.0°C sensor = thermistor
AUXTIN3: +22.0°C sensor = thermistor
PECI Agent 0: +28.5°C (high = +80.0°C, hyst = +75.0°C)
(crit = +100.0°C)
PCH_CHIP_CPU_MAX_TEMP: +0.0°C
PCH_CHIP_TEMP: +0.0°C
PCH_CPU_TEMP: +0.0°C
intrusion0: ALARM
intrusion1: ALARM
beep_enable: disabled
Code: Alles auswählen
lspci
00:00.0 Host bridge: Intel Corporation Intel Kaby Lake Host Bridge (rev 05)
00:01.0 PCI bridge: Intel Corporation Skylake PCIe Controller (x16) (rev 05)
00:14.0 USB controller: Intel Corporation 200 Series PCH USB 3.0 xHCI Controller
00:14.2 Signal processing controller: Intel Corporation 200 Series PCH Thermal Subsystem
00:16.0 Communication controller: Intel Corporation 200 Series PCH CSME HECI
00:17.0 SATA controller: Intel Corporation 200 Series PCH SATA controller [AHCI mode]
00:1b.0 PCI bridge: Intel Corporation 200 Series PCH PCI Express Root Port (rev f0)
00:1c.0 PCI bridge: Intel Corporation 200 Series PCH PCI Express Root Port (rev f0)
00:1c.1 PCI bridge: Intel Corporation 200 Series PCH PCI Express Root Port (rev f0)
00:1c.4 PCI bridge: Intel Corporation 200 Series PCH PCI Express Root Port (rev f0)
00:1d.0 PCI bridge: Intel Corporation 200 Series PCH PCI Express Root Port (rev f0)
00:1f.0 ISA bridge: Intel Corporation 200 Series PCH LPC Controller (Z270)
00:1f.2 Memory controller: Intel Corporation 200 Series PCH PMC
00:1f.3 Audio device: Intel Corporation 200 Series PCH HD Audio
00:1f.4 SMBus: Intel Corporation 200 Series PCH SMBus Controller
00:1f.6 Ethernet controller: Intel Corporation Ethernet Connection (2) I219-V
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Ellesmere [Radeon RX 470/480] (rev c7)
01:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Ellesmere [Radeon RX 580]
04:00.0 SATA controller: ASMedia Technology Inc. ASM1062 Serial ATA Controller (rev 02)
05:00.0 USB controller: ASMedia Technology Inc. Device 2142
Was ist AUXTIN ?
Jemand noch eine Idee was noch fehlt?
Ich freue mich über jede Antwort
MfG Par@noid