[gelöst]Was ist Auxtin ?

Hast Du Probleme mit Hardware, die durch die anderen Foren nicht abgedeckt werden? Schau auch in den "Tipps und Tricks"-Bereich.
Antworten
Benutzeravatar
Par@noid
Beiträge: 244
Registriert: 09.11.2005 13:33:35
Lizenz eigener Beiträge: GNU Free Documentation License
Wohnort: Schwarzwald

[gelöst]Was ist Auxtin ?

Beitrag von Par@noid » 07.01.2018 12:57:43

Hallo Community,
hab mir die Tage nen neuen Rechner zusammengebaut und läuft auch alles so wie gewollt :THX:

Intel® Core i5-7600K, Prozessor
ASRock Z270 Extreme4, Mainboard

be quiet! POWER ZONE 650W, PC-Netzteil

1.lm_sensors und i2c-tools installiert
2. sensors-detect als root ausgeführt und alle Fragen mit yes beantwortet

Code: Alles auswählen

#  sensors
amdgpu-pci-0100
Adapter: PCI adapter
fan1:         696 RPM
temp1:        +29.0°C  (crit =  +0.0°C, hyst =  +0.0°C)

coretemp-isa-0000
Adapter: ISA adapter
Package id 0:  +29.0°C  (high = +80.0°C, crit = +100.0°C)
Core 0:        +26.0°C  (high = +80.0°C, crit = +100.0°C)
Core 1:        +28.0°C  (high = +80.0°C, crit = +100.0°C)
Core 2:        +29.0°C  (high = +80.0°C, crit = +100.0°C)
Core 3:        +28.0°C  (high = +80.0°C, crit = +100.0°C)

nct6791-isa-0290
Adapter: ISA adapter
Vcore:                  +0.42 V  (min =  +0.00 V, max =  +1.74 V)
in1:                    +1.70 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
AVCC:                   +3.36 V  (min =  +2.98 V, max =  +3.63 V)
+3.3V:                  +3.34 V  (min =  +2.98 V, max =  +3.63 V)
in4:                    +1.02 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in5:                    +1.02 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in6:                    +1.00 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
3VSB:                   +3.49 V  (min =  +2.98 V, max =  +3.63 V)
Vbat:                   +3.17 V  (min =  +2.70 V, max =  +3.63 V)
in9:                    +1.02 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in10:                   +0.22 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in11:                   +0.97 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in12:                   +1.22 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in13:                   +1.27 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in14:                   +1.07 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
fan1:                     0 RPM  (min =    0 RPM)
fan2:                  1609 RPM  (min =    0 RPM)
fan3:                  4299 RPM  (min =    0 RPM)
fan4:                     0 RPM  (min =    0 RPM)
fan5:                     0 RPM  (min =    0 RPM)
SYSTIN:                 +28.0°C  (high =  +0.0°C, hyst =  +0.0°C)  ALARM  sensor = thermistor
CPUTIN:                 +26.0°C  (high = +80.0°C, hyst = +75.0°C)  sensor = thermistor
AUXTIN0:                +26.0°C    sensor = thermistor
AUXTIN1:               +105.0°C    sensor = thermistor
AUXTIN2:                +28.0°C    sensor = thermistor
AUXTIN3:                +22.0°C    sensor = thermistor
PECI Agent 0:           +28.5°C  (high = +80.0°C, hyst = +75.0°C)
                                 (crit = +100.0°C)
PCH_CHIP_CPU_MAX_TEMP:   +0.0°C  
PCH_CHIP_TEMP:           +0.0°C  
PCH_CPU_TEMP:            +0.0°C  
intrusion0:            ALARM
intrusion1:            ALARM
beep_enable:           disabled

Code: Alles auswählen

lspci
00:00.0 Host bridge: Intel Corporation Intel Kaby Lake Host Bridge (rev 05)
00:01.0 PCI bridge: Intel Corporation Skylake PCIe Controller (x16) (rev 05)
00:14.0 USB controller: Intel Corporation 200 Series PCH USB 3.0 xHCI Controller
00:14.2 Signal processing controller: Intel Corporation 200 Series PCH Thermal Subsystem
00:16.0 Communication controller: Intel Corporation 200 Series PCH CSME HECI
00:17.0 SATA controller: Intel Corporation 200 Series PCH SATA controller [AHCI mode]
00:1b.0 PCI bridge: Intel Corporation 200 Series PCH PCI Express Root Port (rev f0)
00:1c.0 PCI bridge: Intel Corporation 200 Series PCH PCI Express Root Port (rev f0)
00:1c.1 PCI bridge: Intel Corporation 200 Series PCH PCI Express Root Port (rev f0)
00:1c.4 PCI bridge: Intel Corporation 200 Series PCH PCI Express Root Port (rev f0)
00:1d.0 PCI bridge: Intel Corporation 200 Series PCH PCI Express Root Port (rev f0)
00:1f.0 ISA bridge: Intel Corporation 200 Series PCH LPC Controller (Z270)
00:1f.2 Memory controller: Intel Corporation 200 Series PCH PMC
00:1f.3 Audio device: Intel Corporation 200 Series PCH HD Audio
00:1f.4 SMBus: Intel Corporation 200 Series PCH SMBus Controller
00:1f.6 Ethernet controller: Intel Corporation Ethernet Connection (2) I219-V
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Ellesmere [Radeon RX 470/480] (rev c7)
01:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Ellesmere [Radeon RX 580]
04:00.0 SATA controller: ASMedia Technology Inc. ASM1062 Serial ATA Controller (rev 02)
05:00.0 USB controller: ASMedia Technology Inc. Device 2142
Wert AUXTIN (keine Ahnung was das sein soll) immer auf 105° C Steht :facepalm:

Was ist AUXTIN ?
Jemand noch eine Idee was noch fehlt?
Ich freue mich über jede Antwort :hail:

MfG Par@noid :THX:
Zuletzt geändert von Par@noid am 08.01.2018 06:00:34, insgesamt 1-mal geändert.
Man hilft den Menschen nicht, wenn man für sie tut, was sie selbst tun können .....

Debian GNU/Linux Bookworm/sid 64-bit| GNOME Version 43 :THX:

Benutzeravatar
smutbert
Moderator
Beiträge: 8315
Registriert: 24.07.2011 13:27:39
Wohnort: Graz

Re: Was ist Auxtin ?

Beitrag von smutbert » 07.01.2018 13:10:40

Da fehlt nichts. aux steht für auxiliary (also auf deutsch so etwas wie Zusatz-..., Hilfs-..., Aushilfe-..., kennt man ja von Hifigeräten, die auch oft über AUX IN verfügen, das TIN dürfte für Temperature Input stehen), ist also nur ein weiterer Anschluss/Eingang für einen Temperatursensor, den der Chip bietet (und an dem vermutlich nix dranhängt, wenn er immer denselben Wert anzeigt).

Es kann sein, dass der Mainboardhersteller diesen Eingang einfach brach liegen lässt oder dass sich irgendwo am Mainboard ein Anschluss für einen zusätzlichen Sensor versteckt. Hätte man einen, könnte man den dort anstecken und dann an einer beliebigen Stelle im System verbauen um dort die Temperatur zu messen.

Benutzeravatar
Par@noid
Beiträge: 244
Registriert: 09.11.2005 13:33:35
Lizenz eigener Beiträge: GNU Free Documentation License
Wohnort: Schwarzwald

Re: Was ist Auxtin ?

Beitrag von Par@noid » 07.01.2018 14:01:24

Hallo smutbert,
wäre es möglich in sensors config AUXTIN auskommentieren (abschalten) ?

MfG Par@noid :THX:
Man hilft den Menschen nicht, wenn man für sie tut, was sie selbst tun können .....

Debian GNU/Linux Bookworm/sid 64-bit| GNOME Version 43 :THX:

inne
Beiträge: 3273
Registriert: 29.06.2013 17:32:10
Lizenz eigener Beiträge: GNU General Public License
Kontaktdaten:

Re: Was ist Auxtin ?

Beitrag von inne » 07.01.2018 14:39:44

Hallo,

ich hatte bei mir mal defekte Sensoren auf ignore gesetzt.

Müsste in etwa so funktionieren:

Code: Alles auswählen

cat /etc/sensors.d/local.conf
# Sensoren ignorieren
chip "nct6791-isa-0290"
	ignore AUXTIN0
	ignore AUXTIN1
	ignore AUXTIN2
	ignore AUXTIN3
:?:

Benutzeravatar
Par@noid
Beiträge: 244
Registriert: 09.11.2005 13:33:35
Lizenz eigener Beiträge: GNU Free Documentation License
Wohnort: Schwarzwald

Re: Was ist Auxtin ?

Beitrag von Par@noid » 08.01.2018 05:31:22

leider klappt das nicht :roll:

Code: Alles auswählen

cat /etc/sensors.d/local.conf
# Sensoren ignorieren
chip "nct6791-isa-0290"
	ignore AUXTIN1
        ignore PCH_CHIP_CPU_MAX_TEMP
        ignore PCH_CHIP_TEMP
        ignore PCH_CPU_TEMP
        ignore fan5

Code: Alles auswählen

sensors
amdgpu-pci-0100
Adapter: PCI adapter
fan1:         693 RPM
temp1:        +28.0°C  (crit =  +0.0°C, hyst =  +0.0°C)

coretemp-isa-0000
Adapter: ISA adapter
Package id 0:  +29.0°C  (high = +80.0°C, crit = +100.0°C)
Core 0:        +26.0°C  (high = +80.0°C, crit = +100.0°C)
Core 1:        +28.0°C  (high = +80.0°C, crit = +100.0°C)
Core 2:        +29.0°C  (high = +80.0°C, crit = +100.0°C)
Core 3:        +27.0°C  (high = +80.0°C, crit = +100.0°C)

nct6791-isa-0290
Adapter: ISA adapter
Vcore:                  +0.42 V  (min =  +0.00 V, max =  +1.74 V)
in1:                    +1.70 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
AVCC:                   +3.36 V  (min =  +2.98 V, max =  +3.63 V)
+3.3V:                  +3.34 V  (min =  +2.98 V, max =  +3.63 V)
in4:                    +1.02 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in5:                    +1.02 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in6:                    +1.00 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
3VSB:                   +3.49 V  (min =  +2.98 V, max =  +3.63 V)
Vbat:                   +3.17 V  (min =  +2.70 V, max =  +3.63 V)
in9:                    +1.02 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in10:                   +0.22 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in11:                   +0.97 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in12:                   +1.22 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in13:                   +1.27 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in14:                   +1.07 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
fan1:                     0 RPM  (min =    0 RPM)
fan2:                  1610 RPM  (min =    0 RPM)
fan3:                  4272 RPM  (min =    0 RPM)
fan4:                     0 RPM  (min =    0 RPM)
SYSTIN:                 +27.0°C  (high =  +0.0°C, hyst =  +0.0°C)  ALARM  sensor = thermistor
CPUTIN:                 +26.0°C  (high = +80.0°C, hyst = +75.0°C)  sensor = thermistor
AUXTIN0:                +26.0°C    sensor = thermistor
AUXTIN1:               +105.0°C    sensor = thermistor
AUXTIN2:                +28.0°C    sensor = thermistor
AUXTIN3:                +22.0°C    sensor = thermistor
PECI Agent 0:           +28.5°C  (high = +80.0°C, hyst = +75.0°C)
                                 (crit = +100.0°C)
PCH_CHIP_CPU_MAX_TEMP:   +0.0°C  
PCH_CHIP_TEMP:           +0.0°C  
PCH_CPU_TEMP:            +0.0°C  
intrusion0:            ALARM
intrusion1:            ALARM
beep_enable:           disabled

MfG Par@noid :hail:
Man hilft den Menschen nicht, wenn man für sie tut, was sie selbst tun können .....

Debian GNU/Linux Bookworm/sid 64-bit| GNOME Version 43 :THX:

Benutzeravatar
Par@noid
Beiträge: 244
Registriert: 09.11.2005 13:33:35
Lizenz eigener Beiträge: GNU Free Documentation License
Wohnort: Schwarzwald

Re: Was ist Auxtin ?

Beitrag von Par@noid » 08.01.2018 05:59:37

Problem gelöst

Code: Alles auswählen

cat /etc/sensors.d/local.conf
# Sensoren ignorieren
chip "nct6791-isa-0290"
	ignore temp4 
        ignore temp8
        ignore temp9 
        ignore temp10

sensors

Code: Alles auswählen

amdgpu-pci-0100
Adapter: PCI adapter
fan1:         693 RPM
temp1:        +28.0°C  (crit =  +0.0°C, hyst =  +0.0°C)

coretemp-isa-0000
Adapter: ISA adapter
Package id 0:  +29.0°C  (high = +80.0°C, crit = +100.0°C)
Core 0:        +27.0°C  (high = +80.0°C, crit = +100.0°C)
Core 1:        +29.0°C  (high = +80.0°C, crit = +100.0°C)
Core 2:        +29.0°C  (high = +80.0°C, crit = +100.0°C)
Core 3:        +28.0°C  (high = +80.0°C, crit = +100.0°C)

nct6791-isa-0290
Adapter: ISA adapter
Vcore:         +0.42 V  (min =  +0.00 V, max =  +1.74 V)
in1:           +1.70 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
AVCC:          +3.34 V  (min =  +2.98 V, max =  +3.63 V)
+3.3V:         +3.34 V  (min =  +2.98 V, max =  +3.63 V)
in4:           +1.02 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in5:           +1.02 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in6:           +1.00 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
3VSB:          +3.49 V  (min =  +2.98 V, max =  +3.63 V)
Vbat:          +3.17 V  (min =  +2.70 V, max =  +3.63 V)
in9:           +1.02 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in10:          +0.22 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in11:          +0.97 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in12:          +1.22 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in13:          +1.27 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in14:          +1.07 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
fan1:            0 RPM  (min =    0 RPM)
fan2:         1609 RPM  (min =    0 RPM)
fan3:         4326 RPM  (min =    0 RPM)
fan4:            0 RPM  (min =    0 RPM)
fan5:            0 RPM  (min =    0 RPM)
SYSTIN:        +27.0°C  (high =  +0.0°C, hyst =  +0.0°C)  ALARM  sensor = thermistor
CPUTIN:        +26.0°C  (high = +80.0°C, hyst = +75.0°C)  sensor = thermistor
AUXTIN0:       +26.0°C    sensor = thermistor
AUXTIN2:       +28.0°C    sensor = thermistor
AUXTIN3:       +22.0°C    sensor = thermistor
PECI Agent 0:  +28.5°C  (high = +80.0°C, hyst = +75.0°C)
                        (crit = +100.0°C)
intrusion0:   ALARM
intrusion1:   ALARM
beep_enable:  disabled
@smutbert vielen Dank für deine Hilfe und Unterstützung :THX:

MfG Par@noid
Man hilft den Menschen nicht, wenn man für sie tut, was sie selbst tun können .....

Debian GNU/Linux Bookworm/sid 64-bit| GNOME Version 43 :THX:

Antworten